implementations. Early in the boot the kernel will use an approximate,
however after the timer has been probed it will switch to a more accurate
implementation.
Reviewed by: manu
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D5762
This is currently only a code change without any functional
change. But this allows to set the remote encapsulation port
in a more detailed way, which will be provided in a follow-up
commit.
MFC after: 1 week
FDT overlays is de-facto standard for describing expansion boards like
Beaglebone capes or Raspberry Pi shields. The ides is to have basic
DTB for base board and overlays DTB for shields/capes and to construct
final DTB either using human-readable configuration or some
self-discovery mechanism. I believe this approach can also be expanded
to support dynamically loadable FPGA bitstreams on systems like
Zedboard/Zybo.
Overlaying process is simmilar to executable link process for
binaries: each DTB has "exported" symbols and "undefined" symbols, the
latter are resolved using information for the former obtained from
base DTB or one of the overlays applied earlier (more rare case).
This symbols information is not generated by standard dtc that FreeBSD
has in base system, patched[1] version required to produces
overlay-compatible blobs. So although DTB files generated by
buildkernel do not support overlays there are enough
vendor/community-provided DTB blobs ciruclating around to justify
committing this change to ubldr.
This commit introduces handler for "fdt_overlays" variable that can be
defined either as a loader env variable or U-Boot env variable.
fdt_overlays is comma-separated list of .dtbo files located in
/boot/dtb/ directory along with base .dtb. ubldr loads files and
applies them one-by-one to base .dtb and then passes result blob to
the kernel.
[1] dd6a0533e8
Differential Revision: https://reviews.freebsd.org/D3180
clear vd->vdev_tsd in vdev_geom_close_locked instead of vdev_geom_detach.
In the latter function, it would fail to happen in certain circumstances
where cp->private was unset. Ideally, the latter should never happen, but
it can happen when vdev open fails, or where spares are involved.
MFC after: 4 weeks
X-MFC-With: 298786
Sponsored by: Spectra Logic Corp
This change adds few methods for net80211 channel table setup:
- ieee80211_add_channel()
- ieee80211_add_channel_ht40()
(primarily for drivers, that parse EEPROM to get channel list -
they will allow to hide implementation details).
- ieee80211_add_channel_list_2ghz()
- ieee80211_add_channel_list_5ghz()
(mostly as a replacement for ieee80211_init_channels() - they will allow
to specify non-default channel list; may be used in ic_getradiocaps()).
Tested with wpi(4) (add_channel) and rum(4) (add_channel_list_2ghz).
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D6124
Build and install the subr_unit test program originally written by phk, and
run it with the other ATF tests.
tests/sys/kern/Makefile
* Build and install the subr_unit test as a plain test
sys/kern/subr_unit.c
* Reduce the default number of repetitions from 100 to 1, and add a
command-line parser to override it.
* Don't be so noisy by default
* Fix an include problem for the test build
Reviewed by: ngie
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6038
Split ADC driver in two halves: ADC(analog ot digital) and
TSC(touchscreen). Touchscreen driver is fully functional
up to the point of reporting samples. This part will be added
once FreeBSD has API for touchscreen.
Tested on: Beaglebone Black + 4DCAPE-43T
Reviewed by: loos
Differential Revision: https://reviews.freebsd.org/D5847
I .. can't believe I missed this.
This showed up because the AP was TX'ing LDPC to an iwm(4) chipset,
which didn't advertise LDPC and doesn't /accept/ LDPC. Amusingly, all
the two other FreeBSD 11n parts I had tested with (AR9380, Intel 7260)
and I completely forgot to test on ye olde hardware.
That'll teach me.
Tested:
* AR9580 (AP) - Intel 7260 (STA), AR9380 (STA), Intel 6205 (STA)
This is a follow-up to r298789, which removed the B_DIRTY and B_PERSISTENT
flags. This changeset removes them from the associated %b bit description
string as well.
Reviewed by: pfg
Sponsored by: EMC / Isilon Storage Division
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_geom.c
Move checks for provider's sectorsize and mediasize into a single
location in vdev_geom_attach. Remove the zfs::vdev::taste class;
it's ok to use the regular vdev class for tasting. Consolidate guid
checks into a single location in vdev_attach_ok. Consolidate some
error handling code from vdev_geom_attach into vdev_geom_detach,
closing a resource leak of geom consumers in the process.
Reviewed by: avg
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D5974
function to error out early when no port module is present and doing
eeprom access. This also prevents error codes from filling up in
dmesg.
Sponsored by: Mellanox Technologies
Tested by: Netflix
MFC after: 1 week
So the underlying drivers can use it to select the sending queue
properly for SYN|ACK instead of rolling their own hash.
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6120
LDPC adds better transmit reliability if both ends support it.
You in theory can do both STBC and LDPC at the same time.
If I see issues I'll disable it.
* Only enable it if both ends of a connection negotiate it.
* Disable it if any rate is non-11n.
* Count both LDPC TX and STBC TX.
Tested:
* AR9380, STA mode
We don't have a separate bss node; instead we dup the first node we saw
and turn that into the BSS node. This means that action frames from
that node would be rejected.
So, check that the node is the bss node /and/ the MAC doesn't match ni_macaddr.
That's the "right" way for now to verify it's an unknown node.
This fixes handling action frames in adhoc mode, which includes negotiating
11n aggregation via ADDBA/DELBA.
This by itself isn't enough to correctly create 11n adhoc networks; but
it is required for aggregation to be negotiated.
Tested:
* AR9380, 11n adhoc mode
* broadcom 11ac adhoc (vendor platform)
Sponsored by: Eva Automation, Inc.
Arguably we should only be doing the probe/attach to children of
these devices as well.
Tested by: Michal Stanek <mst_semihalf.com> (arm64)
Differential Revision: https://reviews.freebsd.org/D6133
interested in having tunneled UDP and finding out about the
ICMP (tested by Michael Tuexen with SCTP.. soon to be using
this feature).
Differential Revision: http://reviews.freebsd.org/D5875
async_drain functionality. This as been tested in NF as well as
by Verisign. Still to do in here is to remove all the old flags. They
are currently left being maintained but probably are no longer needed.
Sponsored by: Netflix Inc.
Differential Revision: http://reviews.freebsd.org/D5924
On ARM, we can directly switch between translation tables only when
the size of the mapping for any given virtual address is the same in
the old and new translation tables. The load of new TTB and subsequent
TLB flush is not atomic operation. So speculative page table walk can
load TLB entry from new mapping while rest of TLB entries are still the
old ones. In worst case, this can lead to situation when TLB cache can
contain multiple matching TLB entries. One (from old mapping) L2 entry
for VA + 4k and one (from new mapping) L1 entry for VA.
Thus, we must switch to kernel pmap translation table as intermediate
mapping because all sizes of these (old pmap and kernel pmap) mappings
are same (or unmapped). The same is true for switch from kernel pmap
translation table to new pmap one.
Add new function gpio_alloc_intr_resource(), which allows an allocation
of interrupt resource associated to given gpio pin. It also allows to
specify interrupt configuration.
Note: This functionality is dependent on INTRNG, and must be
implemented in each GPIO controller.
Summary:
The Initial Local APIC ID is returned by CPUID function 1 (in EBX).
On AMD Family 10h systems the way that ID is built is controlled by
an MSR bit (InitApicIdCpuIdLo). BKDG instructs BIOS to set it in a
certain way, but a BIOS can be buggy. In that case the ID can confuse
tools that use it, e.g. hwloc.
For example, on a system that I own real Local APIC IDs are configured
as 0, 1, 2, 3, but IDs reported via CPUID.1 are 0, 0x40, 0x80, 0xc0.
See: https://github.com/open-mpi/hwloc/issues/183
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6060
Labels are limitted by 32 on EF10. It is not sufficient on powerful hosts.
Since only one RxQ is running over each EvQ, zero label may be used.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
PR: 208267
Differential Revision: https://reviews.freebsd.org/D6121
In principle n is only used to carry a copy of ipi_count, which is
unsigned, in the non-VIMAGE case, however ipi_count can be used
directly so it is not needed at all. Removing it makes things look
cleaner.
The "len" parameter is uint32_t, indexing it with an int may
end up in a signed integer overflow.
strlen(3) returns an integer of size_t so the corresponding index should
have that size.
MFC after: 1 week
This allows the PCI-PCI bridge driver to save a reference to the child
device in its softc.
Note that this required moving the "pci" device creation out of
acpi_pcib_attach(). Instead, acpi_pcib_attach() is renamed to
acpi_pcib_fetch_prt() as it's sole action now is to fetch the PCI
interrupt routing table.
Differential Revision: https://reviews.freebsd.org/D6021
'devctl delete' can be used to delete a device that is no longer present.
As an anti-foot-shooting measure, 'delete' will not delete a device
unless it's parent bus says it is no longer present. This can be
overridden by passing the force ('-f') flag.
Note that this command should be used with care. If a device is deleted
that is actually present it can't be resurrected unless the parent bus
device's driver supports rescans.
Differential Revision: https://reviews.freebsd.org/D6019
Rescanning a PCI bus uses the following steps:
- Fetch the current set of child devices and save it in the 'devlist'
array.
- Allocate a parallel array 'unchanged' initalized with NULL pointers.
- Scan the bus checking each slot (and each function on slots with a
multifunction device).
- If a valid function is found, look for a matching device in the 'devlist'
array. If a device is found, save the pointer in the 'unchanged' array.
If a device is not found, add a new device.
- After the scan has finished, walk the 'devlist' array deleting any
devices that do not have a matching pointer in the 'unchanged' array.
- Finally, fetch an updated set of child devices and explicitly attach any
devices that are not present in the 'unchanged' array.
This builds on the previous changes to move subclass data management into
pci_alloc_devinfo(), pci_child_added(), and bus_child_deleted().
Subclasses of the PCI bus use custom rescan logic explicitly override the
rescan method to disable rescans.
Differential Revision: https://reviews.freebsd.org/D6018
The BUS_RESCAN() method rescans a single bus device checking for devices
that have been added or removed from the bus. A new 'rescan' command is
added to devctl(8) to trigger a rescan.
Differential Revision: https://reviews.freebsd.org/D6016
In struct:gctl_req, nargs is unsigned.
In mirror:
g_mirror_syncreqs is unsigned.
In raid:
in struct:g_raid_volume, v_disks_count is unsigned.
In virstor:
in struct:g_virstor_softc, n_components is unsigned.
MFC after: 2 weeks
This greatly reduces the oqdrops under heavy workload.
For TCP send/recv test (10K concurrent connections):
oqdrops is reduced by 17% on sending side, and 57% on receiving side.
For nginx-1.8/wrk-4 1KB object test (10K concurrent connections,
4 requests/connection):
oqdrops is reduced by 44% on nginx side, and 10% on wrk side.
MFC after: 1 week
Sponsored by: Microsoft OSTC
put it off into the pr_task. This is similar to prison_free, and in fact
uses the same task even though they do something slightly different.
This resolves a LOR between the process lock and allprison_lock, which
came about in r298565.
PR: 48471
The facility_initialized and facility arrays are the same size and were
intended to be indexed the same. I believe this mismatch was just a
typo/braino in r208731.
Reported by: Coverity
CID: 1017430
Sponsored by: EMC / Isilon Storage Division
An mbpool is allocated with a contiguous array of mbpages. Freeing an
individual mbpage has never been valid. Don't do it.
This bug has been present since this code was introduced in r117624 (2003).
Reported by: Coverity
CID: 1009687
Sponsored by: EMC / Isilon Storage Division
- Factor out common part to zynq-7000.dtsi
- Fix problem with Zynq interrupts by using interrupt "triples"
in .dtsi file to differentiate between edge-triggered and
level-triggered interrupts
- cgem driver now recognizes "status" property
Submitted by: Thomas Skibo <thomasskibo@yahoo.com>
Differential Revision: https://reviews.freebsd.org/D6095
The disgusting macro INP_WLOCK_RECHECK may early-return. In
tcp_default_ctloutput() the TCP_CCALGOOPT case allocates memory before invoking
this macro, which may leak memory.
Add a _CLEANUP variant that takes a code argument to perform variable cleanup
in the early return path. Use it to free the 'pbuf' allocated in
tcp_default_ctloutput().
I am not especially happy with this macro, but I reckon it's not any worse than
INP_WLOCK_RECHECK already was.
Reported by: Coverity
CID: 1350286
Sponsored by: EMC / Isilon Storage Division
This value is u32 on disk, but assigned to an int in memory. After we do the
implicit conversion via assignment, check that the result is at least one[1]
(non-negative[2]).
1. The subsequent for-loop iterates from gpt_entries minus one, down, until
reaching zero. A negative or zero initial index results in undefined signed
integer overflow.
2. It is also used to index into arrays later.
In practice, we expected non-malicious disks to contain small positive values.
Reported by: Coverity
CID: 1223202
Sponsored by: EMC / Isilon Storage Division
The softc member 'ciss_logical' is an array of 'ciss_max_logical_bus' members.
Most of the time it is iterated correctly. This patch fixes the two instances
where the driver iterated off the end of the array.
Reported by: Coverity
CID: 1305492
Sponsored by: EMC / Isilon Storage Division
ism_stop() already destroys and frees 'sp', including a call to ic_destroy().
Don't dereference 'sp' after ism_stop() and don't invoke ic_destroy() on the
freed memory either.
Reported by: Coverity
CIDs: 1006109, 1304861
Sponsored by: EMC / Isilon Storage Division
It seems that the only way to supply dtb to loader on Zynq-based
SoCs is to manually generate dtb and place it to pre-defined location
on SD card or TFTP server where loader can pick it up. More modern
approach is to add modules/dtb/%soc% module and let installworld
target generate dtb and copy them to /boot/dtb/ where they can be
loaded by ubldr
In win2unixfn() we expand Windows 95 style long names. In some cases that
requires moving the data in the nbp->nb_buf buffer backwards to make room. That
code failed to check for overflows, leading to a stack overflow in win2unixfn().
We now check for this event, and mark the entire conversion as failed in that
case. This means we present the 8 character, dos style, name instead.
PR: 204643
Differential Revision: https://reviews.freebsd.org/D6015
It seems rn_dupedkey may be NULL, because of the NULL check inside the loop.
(Also, the rt gets assigned from rn_dupedkey and NULL checked at top of loop.)
However, the for-loop update condition happens before the top-of-loop check and
dereferences 'rt' unconditionally.
Instead, NULL-check before dereferencing.
If rn_dupedkey cannot in fact be NULL, or something else protects this, feel
free to revert this and add an ASSERT of some kind instead.
This was introduced in r191080 (2009) and moved around slightly in r293657.
Reported by: Coverity
CID: 1348482
Sponsored by: EMC / Isilon Storage Division
This is a trivial follow-up to r296308. Annotate the intentional fallthrough
to make it clear for future readers and linters.
Reported by: Coverity
CID: 1352716
Discussed with: jhb
Sponsored by: EMC / Isilon Storage Division
This is a minor follow-up to r297422, prompted by a Coverity warning. (It's
not a real defect, just a code smell.) OSD slot array reservations are an
array of pointers (void **) but were cast to void* and back unnecessarily.
Keep the correct type from reservation to use.
osd.9 is updated to match, along with a few trivial igor fixes.
Reported by: Coverity
CID: 1353811
Sponsored by: EMC / Isilon Storage Division
Introduced in r298594. There is no path before the 'vap == NULL' check where
vap is not already dereferenced.
Reported by: Coverity
CID: 1354979
Sponsored by: EMC / Isilon Storage Division
boot issues when booting with FDT. It is planned to re-enable this at a
later date.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Set MMC_CAP_4_BIT_DATA and MMC_CAP_8_BIT_DATA based on the "bus-width"
DT property and reduce maximum bus frequency from 52MHz to 50MHz to match
the capabilities of the clock provider.
Tested on a BananaPi BPI-M3 (A83T).
Since the sub-channel offers are synchronized, we can do our own
channel setup without using the sub-channel creation callback.
This paves the way to whack the sub-channel creation callback.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Since the sub-channel offers are synchronized, we can do our own
channel setup without using the sub-channel creation callback.
This paves the way to whack the sub-channel creation callback.
MFC after: 1 week
Sponsored by: Microsoft OSTC
This fixes the sub-channel offer race after Hyper-V device probe/attach
is moved to vmbus SYSINIT/attach.
MFC after: 1 week
Sponsored by: Microsoft OSTC
