play the MIDI files through /dev/sequencer device with tools like
playmidi. The audio output will go through the external MIDI device
such like wavetable synthesis card.
Reviewed by: matk (a long time ago), kib
Approved by: re (kib)
Tested with: Terratec SiXPack 5.1+ + Yamaha DB50XG
MFC after: 4 weeks
Without this patch, some CS4614 cards will need users to reload the driver manually or
the hardware won't be initialised properly. Something like:
# kldload snd_csa
# kldunload snd_csa
# kldload snd_csa
Tested with: Terratec SiXPack 5.1+
Make sure both sides of the DMA buffer memory accesses for the CORB and RIRB
(control buffers) in snd_hda (device and CPU) can see coherent memory. This
is needed on weakly ordered architectures including PowerPC and ARM. Patch
originally by mmel, with small changes.
This does not cover the data path of snd_hda. We don't have sync operations
for in-progress DMA buffers, to sync ranges of a map.
Reviewed By: mmel
Differential Revision: https://reviews.freebsd.org/D16517
The buffer descriptor list entries should be in little endian format. Byte swap
them on BE. This is the last piece of the puzzle for snd_hda(4) to work on
PowerPC.
The CORB and RIRB buffers exist in DMA memory, but the device reads them as
little-endian only. Read and write as LE into the DMA memory block, to work on
BE platforms.
It's easy to confuse the error code as naked it looks decimal (EINVAL is
reported as error 16, instead of error 22, so first reading looks like EBUSY).
Uses of mallocarray(9).
The use of mallocarray(9) has rocketed the required swap to build FreeBSD.
This is likely caused by the allocation size attributes which put extra pressure
on the compiler.
Given that most of these checks are superfluous we have to choose better
where to use mallocarray(9). We still have more uses of mallocarray(9) but
hopefully this is enough to bring swap usage to a reasonable level.
Reported by: wosch
PR: 225197
Focus on code where we are doing multiplications within malloc(9). None of
these is likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.
This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
This logic is still imperfect, since it allows at most 15 bidirectional
streams out of 30 allowed by specification, but at least now those should
work better. On the other side I don't remember I ever saw controller
supporting the bidirectional streams, so this is likely a nop change.
MFC after: 1 month
A long long time ago the register keyword told the compiler to store
the corresponding variable in a CPU register, but it is not relevant
for any compiler used in the FreeBSD world today.
ANSIfy related prototypes while here.
Reviewed by: cem, jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10193
announced by HDA controller.
Incorrectly implermented HDA codec may report support for more stripes
that HDA controller already have. Due to this, always limit number of
enabled stripes by global controller maximum.
Reviewed by: mav
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D8922
More of the same sort of issue as r299503, just missed some sysctls added in a
different place than the others.
Reported by: Coverity
CIDs: 1007692, 1009677, 1009678
Sponsored by: EMC / Isilon Storage Division
None of the sysctl handlers in hdaa use the arg2 parameter, so just pass zero
instead. Additionally, the sizes being passed in were suspect (size of the
pointer rather than the value).
Reported by: Coverity
CIDs: 1007694, 1009679
Sponsored by: EMC / Isilon Storage Division
On some architectures, u_long isn't large enough for resource definitions.
Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but
type `long' is only 32-bit. This extends rman's resources to uintmax_t. With
this change, any resource can feasibly be placed anywhere in physical memory
(within the constraints of the driver).
Why uintmax_t and not something machine dependent, or uint64_t? Though it's
possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on
32-bit architectures. 64-bit architectures should have plenty of RAM to absorb
the increase on resource sizes if and when this occurs, and the number of
resources on memory-constrained systems should be sufficiently small as to not
pose a drastic overhead. That being said, uintmax_t was chosen for source
clarity. If it's specified as uint64_t, all printf()-like calls would either
need casts to uintmax_t, or be littered with PRI*64 macros. Casts to uintmax_t
aren't horrible, but it would also bake into the API for
resource_list_print_type() either a hidden assumption that entries get cast to
uintmax_t for printing, or these calls would need the PRI*64 macros. Since
source code is meant to be read more often than written, I chose the clearest
path of simply using uintmax_t.
Tested on a PowerPC p5020-based board, which places all device resources in
0xfxxxxxxxx, and has 8GB RAM.
Regression tested on qemu-system-i386
Regression tested on qemu-system-mips (malta profile)
Tested PAE and devinfo on virtualbox (live CD)
Special thanks to bz for his testing on ARM.
Reviewed By: bz, jhb (previous)
Relnotes: Yes
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D4544
Most of these are BARs, and we allocate them in their entirety. The one outlier
in this is amdsbwd, which calls bus_set_resource() prior.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D5370 (partial)
Summary:
Migrate to using the semi-opaque type rman_res_t to specify rman resources. For
now, this is still compatible with u_long.
This is step one in migrating rman to use uintmax_t for resources instead of
u_long.
Going forward, this could feasibly be used to specify architecture-specific
definitions of resource ranges, rather than baking a specific integer type into
the API.
This change has been broken out to facilitate MFC'ing drivers back to 10 without
breaking ABI.
Reviewed By: jhb
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5075
years for head. However, it is continuously misused as the mpsafe argument
for callout_init(9). Deprecate the flag and clean up callout_init() calls
to make them more consistent.
Differential Revision: https://reviews.freebsd.org/D2613
Reviewed by: jhb
MFC after: 2 weeks
HDA association descriptors. This fixes a crash during device probe
for some HDA PCI devices.
Reported by: David Wolfskill <david@catwhisker.org>
Reviewed by: mav @
MFC after: 1 week
This requires a patch to redirect the output to a separate DAC when
the headphones are used. While there, add device strings for Intel
Broadwell HDA controllers and Realtek ALC292 codecs.
MFC after: 1 week
