miibus_writereg.
Reduce the DELAY() between reads while waiting for MII access.
Spotted by: yongari
Sponsored by: Rubicon Communications, LLC (Netgate)
Writing the full queue size to it every time was makeing it overflow with a
lot of bogus values.
This fixes the interrupt storms on irq 40.
Sponsored by: Rubicon Communications, LLC (Netgate)
Adds VLAN and port management abilities for etherswitchcfg(8).
The code is conditionally enabled for now, because it is not necessary on
single ethernet use cases.
Obtained from: pfSense
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (Netgate)
Use "ti,am33xx" instead of "ti,am335x", which gives an exact match in every
DTS we support.
This fixes the boot on TI SoCs after r308533.
Suggested by: gonzo
Sponsored by: Rubicon Communications, LLC (Netgate)
the aintc driver for Allwinner A10.
This fixes the boot of the GENERIC ARM kernel on TI/AM335x SoCs.
Sponsored by: Rubicon Communications, LLC (Netgate)
When detaching device trees parent devices must be detached prior to
detaching its children. This is because parent devices can have
pointers to the child devices in their softcs which are not
invalidated by device_delete_child(). This can cause use after free
issues and panic().
Device drivers implementing trees, must ensure its detach function
detaches or deletes all its children before returning.
While at it remove now redundant device_detach() calls before
device_delete_child() and device_delete_children(), mostly in
the USB controller drivers.
Tested by: Jan Henrik Sylvester <me@janh.de>
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D8070
MFC after: 2 weeks
- Fix RX and TX teardown:
. TX teardown would not reclaim the abandoned descriptors;
. Interrupt storms in RX teardown;
. Fixed the acknowledge of the teardown completion interrupt.
- Remove temporary lists for the descriptors;
- Simplified the descriptor handling (less writes and reads from
descriptors where possible);
- Better debug;
- Add support for the RX threshold interrupts:
With interrupt moderation only, an RX overrun is likely to happen. The
RX threshold is set to trigger a non paced interrupt everytime your RX
free buffers are under the minimum threshold, helping to prevent the rx
overrun.
The NIC now survive when pushed over its limits (where previously it would
lock up in a few seconds).
uFW (600MHz SoC) can now forward up to 560Mb/s of UDP traffic (netmap
pkt-gen as source and sink). TCP forwarding rate is over 350Mb/s.
No difference (other than CPU use) was seen on Beaglebone black (1GHz SoC)
for his fast ethernet.
Tested on: uFW, BBB
Sponsored by: Rubicon Communications, LLC (Netgate)
for later Cortex-A CPUs that support the Multiprocessor Extensions. This
will be needed to support both in a single GENERIC kernel while still
being able to only build for a single SoC.
Reviewed by: mmel
Relnotes: yes
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D8138
descriptors are reclaimed as soon as possible.
Without this the free buffers are reclaimed only on watchdog runs or after
trying to enqueue more packets.
Sponsored by: Rubicon Communications, LLC (Netgte)
- Convert "options EVDEV" to "device evdev" and "device uinput", add
modules for both new devices. They are isolated subsystems and do not
require any compile-time changes to general kernel subsytems
- For hybrid drivers that have evdev as an optional way to deliver input
events add option EVDEV_SUPPORT. Update all existing hybrid drivers
to use it instead of EVDEV
- Remove no-op DECLARE_MODULE in evdev, it's not required, MODULE_VERSION
is enough
- Add evdev module dependency to uinput
Submitted by: Vladimir Kondratiev <wulf@cicgroup.ru>
The hardware can be set to limit the number of interrupts from 2 to 63
interrupts per ms.
To keep the compatibility with the TI documentation the sysctl take the
interval between the interrupts pulses: 16~500 us.
Sponsored by: Rubicon Communications, LLC (Netgate)
keep the beaglebone defaults: USB0 -> peripheral/gadget, USB1 -> host.
This is only a workaround as in fact fact this hardware is capable of detect
the USB port mode based on type of cable and act according with the detected
mode. Unfortunately the driver does not handle that at moment.
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC (Netgate)
- evdev_set_methods call is not required if actual methods are no-ops
- evdev_set_serial is also optional if there is no meaningful input device
identifier
- evdev_set_id on the other hand is mandatory, so set virtual bus with
dummy vendor/product/version
Suggested by: Vladimir Kondratiev
Add generic evdev support to touchscreen part of ti_adc: two absolute
coordinates + button touch to indicate pen position. Pressure value
reporting is not implemented yet.
Tested on: Beaglebone Black + 4DCAPE-43T + tslib
Value passed as islocked argument to knlist_add should
be consistent with actual lock state so add lock/unlock
calls around knlist_add
PR: 212120
Submitted by: Manuel Stuhn
- Read interrupt properties at bus enumeration time and store
it into global mapping table.
- At bus_activate_resource() time, given mapping entry is resolved and
connected to real interrupt source. A copy of mapping entry is attached
to given resource.
- At bus_setup_intr() time, mapping entry stored in resource is used
for delivery of requested interrupt configuration.
- For MSI/MSIX interrupts, mapping entry is created within
pci_alloc_msi()/pci_alloc_msix() call.
- For legacy PCI interrupts, mapping entry must be created within
pcib_route_interrupt() by pcib driver itself.
Reviewed by: nwhitehorn, andrew
Differential Revision: https://reviews.freebsd.org/D7493
simplebus_add_device() expect a simplebus_softc structure associated with
the device.
Add the simplebus_softc as first member in am335x_pwmss_softc structure.
Sponsored by: Rubicon Communications (Netgate)
Sometimes the software loses the race when appending more descriptors to
the tx ring and the tx queue stops.
This commit detects this condition and restart the tx queue whenever it stall.
Tested by: sobomax@, Keith White <kwhite@site.uottawa.ca>,
Paul Mather <paul@gromit.dlib.vt.edu>
Sponsored by: Rubicon Communications (Netgate)
Approved by: re (kib)
needed in later changes where we may not be able to lock the pic list lock
to perform a lookup, e.g. from within interrupt context.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
- Introduce new OF API function OF_prop_free to free memory allocated by
OF_getprop_alloc and OF_getencprop_alloc. Current code just calls free(9)
with M_OFWPROP memory class which assumes knowledge about OF_*prop_alloc
functions' internals and leads to unneccessary code coupling
- Convert some of the free(..., M_OFWPROP) instances to OF_prop_free
Files affected by this commit are the ones I was able to test on real
hardware. The rest of free(..., M_OFWPROP) instances will be handled with
idividual maintainers
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D6315
Note that the updated comment is valid only for INTRNG. This should not
be a problem as not INTRNG code is left in place for debugging reasons
only and should not be used anymore. It's anticipated that this old
code will be removed soon.
struct associated with some type defined in enum intr_map_data_type
must have struct intr_map_data on the top of its own definition now.
When such structs are used, correct type and size must be filled in.
There are three such structs defined in sys/intr.h now. Their
definitions should be moved to corresponding headers by follow-up
commits.
While this change was propagated to all INTRNG like PICs,
pic_map_intr() method implementations were corrected on some places.
For this specific method, it's ensured by a caller that the 'data'
argument passed to this method is never NULL. Also, the return error
values were standardized there.
implementations. Early in the boot the kernel will use an approximate,
however after the timer has been probed it will switch to a more accurate
implementation.
Reviewed by: manu
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D5762
Split ADC driver in two halves: ADC(analog ot digital) and
TSC(touchscreen). Touchscreen driver is fully functional
up to the point of reporting samples. This part will be added
once FreeBSD has API for touchscreen.
Tested on: Beaglebone Black + 4DCAPE-43T
Reviewed by: loos
Differential Revision: https://reviews.freebsd.org/D5847
universal.
(1) New struct intr_map_data is defined as a container for arbitrary
description of an interrupt used by a device. Typically, an interrupt
number and configuration relevant to an interrupt controller is encoded
in such description. However, any additional information may be encoded
too like a set of cpus on which an interrupt should be enabled or vendor
specific data needed for setup of an interrupt in controller. The struct
intr_map_data itself is meant to be opaque for INTRNG.
(2) An intr_map_irq() function is created which takes an interrupt
controller identification and struct intr_map_data as arguments and
returns global interrupt number which identifies an interrupt.
(3) A set of functions to be used by bus drivers is created as well as
a corresponding set of methods for interrupt controller drivers. These
sets take both struct resource and struct intr_map_data as one of the
arguments. There is a goal to keep struct intr_map_data in struct
resource, however, this way a final solution is not limited to that.
(4) Other small changes are done to reflect new situation.
This is only first step aiming to create stable interface for interrupt
controller drivers. Thus, some temporary solution is taken. Interrupt
descriptions for devices are stored in INTRNG and two specific mapping
function are created to be temporary used by bus drivers. That's why
the struct intr_map_data is not opaque for INTRNG now. This temporary
solution will be replaced by final one in next step.
Differential Revision: https://reviews.freebsd.org/D5730
This driver works in PIO mode for now, interrupts are available only when
FIFO is enabled. The FIFO cannot be used with arbitrary sizes which defeat
its general use.
At some point we can add DMA transfers where the FIFO can be more useful.
Tested on uBMC (microBMC) and BBB.
Sponsored by: Rubicon Communications (Netgate)
a DRIVER_MODULE() referencing mmc_driver has a MODULE_DEPEND() on mmc. This
is because the kernel linker only searches for symbols in dependent modules,
so loading sdhci_pci (and other bus-flavors of sdhci) would fail when mmc
was not compiled into the kernel (even if you hand-loaded mmc first).
(Thanks to jilles@ for providing the vital clue about the kernel linker.)
In dual emac mode, the CPSW subsystem provides two independent ethernets.
This is implemented (as recommended by TI's TRM) with a mixture of switch
settings (vlans) and specific features of CPSW subsystem.
The driver was splitted to accommodate the shared parts (RX and TX rings
for example) while it still provides two independent ethernets.
Each of the ethernet ports driver has it's own set of MDIO registers among
the other private settings.
Previously this driver always operate in promisc mode, now the Switch ALE
(address table entry) is properly initialized and enabled.
The driver is also tested (and known to work) with both ports operating in
single port mode (active_slave 0 or 1).
Tested on uBMC (dual emac mode, both ports in single mode, giga and fast
ethernet) and BBB (single port, fast ethernet).
Sponsored by: Rubicon Communications (Netgate)
taskqueue_enqueue() was changed to support both fast and non-fast
taskqueues 10 years ago in r154167. It has been a compat shim ever
since. It's time for the compat shim to go.
Submitted by: Howard Su <howard0su@gmail.com>
Reviewed by: sephe
Differential Revision: https://reviews.freebsd.org/D5131
intr_pic_init_secondary. Replace them with a direct call. On BCM2836
and ARMADA XP we need to add this function, but it can be empty.
Reviewed by: ian, imp
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D5460
slightly wrong on the others. We should just check if mp_ncpus is set to
more than one CPU as we may wish to run on a single core even when SMP is
available.
Reviewed by: ian
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D5458
Only L2 PIPT cache is supported for __ARM_ARCH >= 6.
In fact, this is just a pure proclamation as this option is used
only in armv4 specific files now.
am335x_prcm driver which uses it. Used BUS_PASS_BUS is a quick pick
for now and may be revised when other drivers start using multipass
feature.
This is needed after an update of Linux dts files done in r295436.
The ci20 port (by kan@) is going to reuse almost all of the intrng code
since the SoC in question looks suspiciously like someone took an ARM
SoC design and replaced the ARM core with a MIPS core.
* migrate out the code;
* rename ARM_ -> INTR_;
* rename arm_ -> intr_;
* move the interrupt flush routine from intr.c / intrng.c into
arm/machdep_intr.c - removing the code duplication and removing
the ARM specific bits from here.
Thanks to the Star Wars: The Force Awakens premiere line for allowing
me a couple hours of quiet time to finish the universe builds.
Tested:
* make universe
TODO:
* The structure definitions in subr_intr.c still includes machine/intr.h
which requires one duplicates all of the intrng definitions in
the platform code (which kan has done, and I think we don't have to.)
Instead I should break out the generic things (function declarations,
common intr structures, etc) into a separate header.
* Kan has requested I make the PIC based IPI stuff optional.
