That revision addressed a Coverity CID that could lead to a buffer overflow,
but it had an off-by-one error in the buffer size check.
Reported by: Coverity
Coverity CID: 1405530
MFC after: 3 days
MFC-With: 351961
Sponsored by: The FreeBSD Foundation
Coverity complained that I wasn't initializing some class members until the
SetUp method. Do it in the constructor instead.
Reported by: Coverity
Coverity CIDs: 1404352, 1404378
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Where open(2) is expected to fail, the tests should assert or expect that
its return value is -1. These tests all accepted too much but happened to
pass anyway.
Reported by: Coverity
Coverity CID: 1404512, 1404378, 1404504, 1404483
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
VPRC_BLOCKED is a refcount flag used to indicate that a thread is
tearing down mappings of a page. When set, it causes attempts to wire a
page via a pmap lookup to fail. It should never represent the last
reference to a page, so assert this.
Suggested by: kib
Reviewed by: alc, kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21639
This function loaded the page's queue index before setting PGA_DEQUEUE.
In this window the page daemon may have deactivated the page, updating
its queue index. Make the operation atomic using vm_page_pqstate_cmpset();
the page daemon will not modify the page once it observes that PGA_DEQUEUE
is set.
Reported and tested by: pho
Reviewed by: alc, kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21639
After r352110 the attempt to remove mappings of the page being replaced
may fail if the page is wired. In this case we must free the replacement
page.
Reviewed by: alc, kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21639
- Remove a dead variable from the amd64 pmap_extract_and_hold().
- Fix grammar in the vm_page_wire man page.
Reported by: alc
Reviewed by: alc, kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21639
- Remove a dead variable from the amd64 pmap_extract_and_hold().
- Fix grammar in the vm_page_wire man page.
Reported by: alc
Reviewed by: alc, kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21639
* When unparenting a vnode, actually clear the flag. AFAIK this is basically
a no-op because we only unparent a vnode when reclaiming it or when
unlinking.
* There's no need to call fuse_vnode_setparent during reclaim, because we're
about to free the vnode data anyway.
Reviewed by: emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21630
vnode_pager_setsize() under the node mutex.
r248567 moved some calls of vnode_pager_setsize() after the node lock
is unlocked, do the rest now.
Reported and tested by: peterj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Since login and login.conf moved to the utilities packages move also
the post-install related commands.
Reported by: mj-mailinglist@gmx.de
Reviewed by: bapt
calls to max allowed UDP datagram size.
Since max allowed size both for keys and values where increased, the
old sizes of around 1K cause ypmatch(3) failures, while plain maps
fetches work.
The buffers were reduced in r34146 from default UDP rpcclient values
to 1024/2304 due to the key and value size being 1K.
Reviewed by: slavash
Sponsored by: Mellanox Technologies
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D21586
Since TX interrupt is generated when THRE is set, wait for TEMT set means
wait for full character transmission time. At low speeds that may take
awhile, burning CPU time while holding sc_hwmtx lock, also congested.
This is partial revert of r317659.
PR: 240121
MFC after: 2 weeks
The latest imported FDT data defines a node for an iomuxc-gpr device,
which we don't support (or need, right now) in addition to the usual
iomuxc device. Unfortunately, the dts improperly assigns overlapping
ranges of mmio space to both devices. The -gpr device is also a syscon
and simple_mfd device.
At runtime the simple_mfd driver attaches for the iomuxc-gpr node, then
when the real iomuxc driver comes along later, it fails to attach because
it tries to allocate its register space, and it's already partially in
use by the bogus instance of simple_mfd.
This change works around the problem by simply disabling the node for
the iomuxc-gpr device, since we don't need it for anything.
checksum computation, do not assume that the IP header chain and the
SCTP common header are in contiguous memory although the SCTP lays
out the mbuf chains that way. If there are IP-level options inserted
by the IP layer, the constraint is not fulfilled anymore.
This issues was found by running syzkaller. Thanks to markj@ who is
running an instance which also provides kernel dumps. This allowed me
to find this issue.
MFC after: 3 days
A future change to posixshm to add file sealing (in DIFF_21391[0] and child)
will move locking out of shm_dotruncate as kern_shm_open() will require the
lock to be held across the dotruncate until the seal is actually applied.
For this, the cookie is passed into shm_dotruncate_locked which asserts
RCA_WLOCKED.
[0] Name changed to protect the innocent, hopefully, from getting autoclosed
due to this reference...
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D21628
that makes the upstream FDT data work right, so we don't need to see a
couple dozen instances of it spam the dmesg at boot time unless it's a
verbose boot.
On arm and arm64, where chars are unsigned by default, buildworld dies
with:
--- terminal.o ---
/usr/src/contrib/libedit/terminal.c:569:41: error: comparison of
integers of different signs: 'wint_t' (aka 'int') and 'wchar_t' (aka
'unsigned int') [-Werror,-Wsign-compare]
el->el_cursor.v][where & 0370] !=
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^
/usr/src/contrib/libedit/terminal.c:659:28: error: comparison of
integers of different signs: 'wint_t' (aka 'int') and 'wchar_t' (aka
'unsigned int') [-Werror,-Wsign-compare]
[el->el_cursor.h] == MB_FILL_CHAR)
~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~
Fix this by making MB_FILL_CHAR a wint_t, so no casting is needed.
Note that in https://reviews.freebsd.org/D21584 this was also proposed
by Yuichiro Naito <naito.yuichiro_gmail.com>.
Reviewed by: bapt
Subscribers: naito.yuichiro_gmail.com, ml_vishwin.info
MFC after: 3 weeks
X-MFC-With: r352275
Differential Revision: https://reviews.freebsd.org/D21657
After the aux vector is moved, it is necessary to re-digest aux_info so the
pointers are updated to the new locations.
This was causing thread creation to fail on powerpc64 when using direct
execution due to a nonsense value being read for aux_info[AT_STACKPROT].
Approved by: jhibbits (mentor)
Differential Revision: https://reviews.freebsd.org/D21656
Errors are communicated between the i2c controller layer and upper layers
(iicbus and slave device drivers) using a set of IIC_Exxxxxx constants which
effectively define a private number space separate from (and having values
that conflict with) the system errno number space. Sometimes it is necessary
to report a plain old system error (especially EINTR) from the controller or
bus layer and have that value make it back across the syscall interface
intact.
I initially considered replicating a few "crucial" errno values with similar
names and new numbers, e.g., IIC_EINTR, IIC_ERESTART, etc. It seemed like
that had the potential to grow over time until many of the errno names were
duplicated into the IIC_Exxxxx space.
So instead, this defines a mechanism to "encode" an errno into the IIC_Exxxx
space by setting the high bit and putting the errno into the lower-order
bits; a new errno2iic() function does this. The existing iic2errno()
recognizes the encoded values and extracts the original errno out of the
encoded value. An interesting wrinkle occurs with the pseudo-error values
such as ERESTART -- they aleady have the high bit set, and turning it off
would be the wrong thing to do. Instead, iic2errno() recognizes that lots of
high bits are on (i.e., it's a negative number near to zero) and just
returns that value as-is.
Thus, existing drivers continue to work without needing any changes, and
there is now a way to return errno values from the lower layers. The first
use of that is in iicbus_poll() which does mtx_sleep() with the PCATCH flag,
and needs to return the errno from that up the call chain.
Differential Revision: https://reviews.freebsd.org/D20975
to the traditional tree(3) RB trees, but using an array (preallocated,
linear chunk of memory) to store the tree.
This avoids allocation overhead, improves memory locality,
and makes it trivially easy to share/transfer/copy the entire tree
without the need for marshalling. The downside is that the size
is fixed at initialization time; there is no mechanism to resize
it.
This is one of the dependencies for the new stats(3) framework
(https://reviews.freebsd.org/D20477).
Reviewed by: bcr (man pages), markj
Discussed with: cem
MFC after: 2 weeks
Sponsored by: Klara Inc, Netflix
Obtained from: Netflix
Differential Revision: https://reviews.freebsd.org/D20324
of the reverse.
This fixes Linux sysctl(8) binary - it assumes the first two
directory entries are always "." and "..". There might be other
Linux apps affected by this.
NB it might be a good idea to rewrite it using queue(3).
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21550
- Fix the statement that big5 is a de facto standard of Traditional Chinese
text [1]
- Add a BUGS section describes the problem of big5 and suggests use utf8
PR: 189095
Submitted by: Brennan Vincent <brennan@umanwizard.com> [1]
Reviewed by: Ting-Wei Lan <lantw44@gmail.com>
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21622
This command will trigger a reload of the configuration from disk. This is
useful if you've changed currdev from recovery media to local disk as much
as I have over the past ~2 hours and are tired of the extra keystrokes.
This is really just a glorified shortcut, but reload-conf is likely easier
to remember for other people and does save some keystrokes when reloading
the configuration. It is also resilient to the underlying config method
changing interface, but this is unlikely to happen.
MFC after: 1 week
Add a very basic NVRAM driver for OPAL which can be used by the IBM
powerpc-utils nvram utility, not to be confused with the base nvram utility,
which only operates on powermac_nvram.
The IBM utility handles all partitions itself, treating the nvram device as
a plain store.
An alternative would be to manage partitions in the kernel, and augment the
base nvram utility to deal with different backing stores, but that
complicates the driver significantly. Instead, present the same interface
IBM's utlity expects, and we get the usage for free.
Tested by: bdragon
I/O requests after the given number have been allowed though.
Approved by: imp (mentor)
Reviewed by: rpokala kib 0mp mckusick
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21593
in various declarations.
Otherwise, depending on how unwind-arm.h is included from other source
files, the compiler may complain that uint32_t and uint64_t are unknown
types.
MFC after: 3 days
pages to page as necessary.
To restore historic BSD behaviour add the following to ntp.conf:
rlimit memlock 32
Discussed on: freebsd-current@ between Sept 6-9, 2019
Reported by: Users using ASLR with stack gap != 0
Reviewed by: ian, kib, rgrimes (all previous versions)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21581
This is re-appearance of the nop code removed from other arches in r287625.
Reviewed by: alc (as part of the larger patch), markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
DIfferential revision: https://reviews.freebsd.org/D21645
Intel Stratix 10 SoC includes a quad-core arm64 cluster and FPGA fabric.
This adds support for reconfiguring FPGA.
Accessing FPGA core of this SoC require the level of privilege EL3,
while kernel runs in EL1 (lower) level of privilege.
This provides an Intel service layer interface that uses SMCCC to pass
queries to the secure-monitor (EL3).
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D21454
PSCI code to use it.
This interface will also be used by Intel Stratix 10 platform.
This was not tested on arm due to lack of PSCI-enabled arm hardware
lying around.
Reviewed by: andrew
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D21439
1. If we release the last usecount we take ownership of the hold count, which
means the vnode will remain allocated until we vdrop it.
2. If someone else vrefs they will find no usecount and will proceed to add
their own hold count.
3. No code has a problem with v_usecount transitioning to 0 without the
interlock
These facts combined mean we can fetchadd instead of having a cmpset loop.
Reviewed by: kib (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21528
This version bring many fixes regarding unicode support
It also adds proper support for filename completion (we do not need our custom
patches anymore)
Improves the libreadline compatibility
Note that the same work was done by Yuichiro Naito in
https://reviews.freebsd.org/D21196 the main difference is in this case we have
reimported libedit in contrib to fix a long standing mess in the previous merges
which prevented a proper update workflow. (discussed long ago with pfg@)
The only difference with upstream libedit is we have added a compatibility shim
for the _elf_fn_sh_complete function which we previously added to support quoting
in filename completion and is not needed anymore.
This was added to continue supported old /bin/sh binaries and not break backward
compatibility (as discussed with jilles@)
Reviewed by: Yuichiro Naito <naito.yuichiro_gmail.com>
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D21584
Those scripts are without copyright and license assignement since their creation
After grabbing information from The various authors and contributors assign
proper license header and copyrights.
This has been reported by yuripv in his work on integrating those in Illumos!
Reported by: yuripv
Discussed with: marino, edwin
MFC after: 3 days
This commit fixes bug: command "jail -r" didn't trigger pre/post stop
commands (and others) defined in config file if jid is specified insted of
name. Also it adds basic tests for usr.sbin/jail to avoid regression.
Reviewed by: jamie, kevans, ray
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D21328