Once the controller has failed, fail all I/O w/o sending it to the
device. The reset of the nvme driver won't schedule any I/O to the
failed device, and the controller is in an indeterminate state and can't
accept I/O. Fail both at the top end of the sim and the bottom
end. Don't bother queueing up the I/O for failure in a different task.
Reviewed by: chuck
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D31341
Various syncs with the e1000 shared code from DPDK:
"cid-gigabit.2020.06.05.tar.gz released by ND"
Approved by: imp
Obtained from: DPDK
MFC after: 1 week
Enabling ulp on link down when cable is connect caused an infinite
loop of linkup/down indications in the NDIS driver.
After discussed, correct flow is to enable ULP only when cable is
disconnected.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Approved by: imp
Obtained from: DPDK (4bff263d54d299269966365f9697941eecaa241b)
MFC after: 1 week
During LTO build compiler reports some 'false positive' warnings about
variables being possibly used uninitialized. This patch silences these
warnings.
Exemplary compiler warning to suppress (with LTO enabled):
error: 'link' may be used uninitialized in this function
[-Werror=maybe-uninitialized]
if (link) {
Signed-off-by: Andrzej Ostruszka <aostruszka@marvell.com>
Approved by: imp
Obtained from: DPDK (46136031f19107f4e9b6b3a952cb7f57877a7f0f)
MFC after: 1 week
In function e1000_update_mc_addr_list_vf(), "msgbuf[0]" is used prior
to initialization at "msgbuf[0] |= E1000_VF_SET_MULTICAST_OVERFLOW".
And "msgbuf[0]" is overwritten at "msgbuf[0] = E1000_VF_SET_MULTICAST".
Fix it by moving the second line prior to the first one that mentioned
above.
Fixes: dffbaf7880a8 ("e1000: revert fix for multicast in VF")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Approved by: imp
Obtained from: DPDK (f58ca2f9ef6)
MFC after: 1 week
This fixes the timed out for shadow RAM write EEWR can't be detected.
Fixes: 5a32a257f957 ("e1000: more NICs in base driver")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Approved by: imp
Obtained from: DPDK (4a8ab48ec47b3616272e50620b8e1a9599358ea6)
MFC after: 1 week
Due timing issues in WHL and since recovery by host is
not always supported, increased timeout for Manageability Engine(ME)
to finish Ultra Low Power(ULP) exit flow for Nahum before timer expiration.
Signed-off-by: Nir Efrati <nir.efrati@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (cf1f3ca45d33e793ca581200b4000c39a798113e)
MFC after: 1 week
Added defines for the EEC, SHADOWINF and FLFWUPDATE registers needed for
the nvmupd_validate_offset function to correctly validate the NVM update
offset.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (2c7fe65ab9a31e6ebf438dad7ccc59bcde83a89f)
MFC after: 1 week
Now the functions are being accessed outside of the file, we need
to properly expose them for silicon families to use.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (df01c0ee277d51f81d7d72501dba97550d3b6c4a)
MFC after: 1 week
This code is required for the update for system clock.
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (3f0188c8f29847038bc9f306b2570ace57e3811c)
MFC after: 1 week
Add two files base.c and base.h to reduce the redundancy
in the silicon family code.
Remove the code duplication from e1000_82575 files.
Clean family specific functions from base.
Fix up a stray and duplicate function declaration.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (44dddd14059f151f39f7e075b887decfc9a10f11)
MFC after: 1 week
Fix typo in piece of code of NVM access for SPT.
And cleans up the remaining instances in the shared code
where it was not adhering to the Linux code standard.
Wrong description was found in the mentioned file, so fix them.
Remove shadowing variable declarations.
Relating to operands in bitwise operations having different sizes.
Unreachable code since *clock_in_i2c_* always return success.
Don't return unused s32 and don't check for constants.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Robert Konklewski <robertx.konklewski@intel.com>
Signed-off-by: Doug Dziggel <douglas.a.dziggel@intel.com>
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (b8592c89c8fbc871d22313dcac0b86c89a7d5a62)
MFC after: 1 week
Copyrights in sync with "cid-gigabit.2020.06.05.tar.gz released by ND"
(from DPDK).
README from the latest em-7.7.8 on intel.com
Approved by: imp
MFC after: 1 week
This reverts commit fc7682b17f.
This will be done incrementally to help with bisecting an issue in
later I21x devices (ich8lan).
PR: 258153
Approved by: imp
MFC after: 1 day
As with FIFOs, a path descriptor for a unix socket cannot be used with
kevent().
In principle connectat(2) and bindat(2) could be modified to support an
AT_EMPTY_PATH-like mode which operates on the socket referenced by an
O_PATH fd referencing a unix socket. That would eliminate the path
length limit imposed by sockaddr_un.
Update O_PATH tests.
Reviewed by: kib
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31970
To handle shutdown(SHUT_RD) we flush the receive buffer of the socket.
This may involve searching for control messages of type SCM_RIGHTS,
since we need to close the file references. Closing arbitrary files
with socket buffer locks held is undesirable, mainly due to lock
ordering issues, so we instead make a copy of the socket buffer and
operate on that without any locks. Fields in the original buffer are
cleared.
This behaviour clobbered the AIO job queue associated with a receive
buffer. It could also cause us to leak a KTLS session reference.
Reorder socket buffer fields to address this.
An alternate solution would be to remove the hack in sorflush(), but
this is not quite feasible (yet). In particular, though sorflush()
flags the sockbuf with SBS_CANTRCVMORE, it is possible for more data to
be queued - the flag just prevents userspace from reading more data. I
suspect we should fix this; SBS_CANTRCVMORE represents a terminal state
and protocols can likely just drop any data destined for such a buffer.
Many of them already do, but in some cases the check is racy, and some
KPI churn will be needed to fix everything. This approach is more
straightforward for now.
Reported by: syzbot+104d8ee3430361cb2795@syzkaller.appspotmail.com
Reported by: syzbot+5bd2e7d05f84a59d0d1b@syzkaller.appspotmail.com
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31976
This flag was added during the transition away from the legacy zone
allocator, commit c897b81311. The old
zone allocator effectively provided _NOFREE semantics, but it seems that
they are not required for sockets. In particular, we use reference
counting to keep sockets live.
One somewhat dangerous case is sonewconn(), which returns a pointer to a
socket with reference count 0. This socket is still effectively owned
by the listening socket. Protocols must therefore be careful to
synchronize sonewconn() calls with their pru_close implementations,
since for listening sockets soclose() will abort the child sockets. For
example, TCP holds the listening socket's PCB read locked across the
sonewconn() call, which blocks tcp_usr_close(), and sofree()
synchronizes with a concurrent soabort() of the nascent socket.
However, _NOFREE semantics are not required here.
Eliminating _NOFREE has several benefits: it enables use-after-free
detection (e.g., by KASAN) and lets the system reclaim memory from the
socket zone under memory pressure. No functional change intended.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31975
Sockets in a listen queue hold a reference to the parent listening
socket. Several code paths release this reference manually when moving
a child socket out of the queue.
Replace comments about the expected post-decrement refcount value with
assertions. Use refcount_load() instead of a plain load. No functional
change intended.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31974
After releasing the fd reference to a socket "so", we should avoid
testing SOLISTENING(so) since the socket may have been freed. Instead,
directly test whether the list of unaccepted sockets is empty.
Fixes: f4bb1869dd ("Consistently use the SOLISTENING() macro")
Pointy hat: markj
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31973
ktls_get_(rx|tx)_mode() can return an errno value or a TLS mode, so
errors are effectively hidden. Fix this by using a separate output
parameter. Convert to the new socket buffer locking macros while here.
Note that the socket buffer lock is not needed to synchronize the
SOLISTENING check here, we can rely on the PCB lock.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31977
This is useful for measuring the number of pages that could be freed
from a NOFREE zone under memory pressure.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Each locale embeds a lazily initialized lconv which is populated by
localeconv(3) and localeconv_l(3). When setlocale(3) updates the global
locale, the lconv needs to be (lazily) reinitialized. To signal this,
we set flag variables in the locale structure. There are two problems:
- The flags are set before the locale is fully updated, so a concurrent
localeconv() call can observe partially initialized locale data.
- No barriers ensure that localeconv() observes a fully initialized
locale if a flag is set.
So, move the flag update appropriately, and use acq/rel barriers to
provide some synchronization. Note that this is inadequate in the face
of multiple concurrent calls to setlocale(3), but this is not expected
to work regardless.
Thanks to Henry Hu <henry.hu.sh@gmail.com> for providing a test case
demonstrating the race.
PR: 258360
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31899
ELF tool chain readelf accepts -u / --unwind but just ignores the
option. This was previously undocumented, which could be confusing for
someone encountering `readelf -u` (in a script or GNU readelf example).
Reported by: markj (in D32003)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
This matches the GNU and LLVM versions of readelf.
As markj noted in the review -u is not actually implemented yet and has
no effect. The option is accepted and just ignored.
Reported by: andrew
Reviewed by: andrew, markj
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32003
It allows to override kern.elf{32,64}.allow_wx on per-process basis.
In particular, it makes it possible to run binaries without PT_GNU_STACK
and without elfctl note while allow_wx = 0.
Reviewed by: brooks, emaste, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31779
The address with a host part of all zeros was used as a broadcast long
ago, but the default has been all ones since 4.3BSD and RFC1122. Until
now, we would broadcast the host zero address as well as the configured
address. Change to not broadcasting that address by default, but add a
sysctl (net.inet.ip.broadcast_lowest) to re-enable it. Note that the
correct way to use the zero address for broadcast would be to configure
it as the broadcast address for the network.
See https:/datatracker.ietf.org/doc/draft-schoen-intarea-lowest-address/
and the discussion in https://reviews.freebsd.org/D19316. Note, Linux
now implements this.
Reviewed by: rgrimes, tuexen; melifaro (previous version)
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D31861
This reduces the FreeBSD boot time by approximately 5 seconds,
roughly equally divided betwenn two factors:
* Disk I/O is faster in the EFI loader since it can perform larger
I/Os. (The BIOS loader is limited due to the use of bounce buffers
in sub-1M memory.)
* The EFI console is much faster than the VGA console.
Note however that not all EC2 instance types support UEFI; as a
general rule the newer instances (based on Amazon's "Nitro" platform)
support UEFI but the older instances (based on Xen) do not.
X-MFC: TBD based on tradeoff between performance and compatibility
Relnotes: yes
Sponsored by: https://www.patreon.com/cperciva
