(Rest is from the README that came with the firmware)
Version : 1.26.4.0
Date : 12/02/2021
Fixes
-----
BASE:
- Fixed error on setting 25G speed on 100G copper with multiple FEC set in
firmware commands.
- Handle link of unknown optics modules by enabling module tx unconditionally.
- Fixed link not coming up for 25G CRS phys. Firmware incorrectly tried to
bring up the link in RS-FEC but as per IEEE spec, it must be BASER FEC.
- Fixed an issue where firmware doesn't automatically retry next FEC if driver
asks to bring up the link using RS-FEC and link doesn't come up.
Obtained from: Chelsio Communications
MFC after: 1 month
Sponsored by: Chelsio Communications
Not doing so results in ctfconvert failing with
ERROR: ctfconvert: elf-vdso.so.o doesn't have type data to convert
On FreeBSD this is non-fatal, since the ctf tools have a hack to make
such errors not fail the build and instead just silently continue
without CTF data (which is a bad idea these days and should probably be
removed; they date back to the original import). However, those are
under #ifdef __FreeBSD__ so do not apply when cross-building from
non-FreeBSD, causing the build to fail.
Fix this by forwarding DEBUG on to the compiler invocation for the VDSO
wrapper. It's assembly so it's not hugely useful, but there is a
non-zero amount of information preserved, and other assembly files are
built with -g by default too so this matches them; the alternative would
be to tag the files.amd64 entries with no-ctfmerge. Note that the VDSO
itself is still compiled without debug info, this only affects the
wrapper linked into the kernel.
Fixes: 98c8b62524 ("vdso for ia32 on amd64"), ab4524b3d7 ("amd64: wrap 64bit sigtramp into vdso")
MFC after: 1 month
a.out.ko is useless without COMPAT_FREEBSD32, and since vdso support was
added, it requires a header built during depend phase, from the COMPAT
option.
Reported by: glebius
Reviewed by: emaste, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D33311
Also zs(4) and sab(4), which have similarly been removed.
Reviewed by: imp, jhb, emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D33279
This is a MAC policy module that grants scheduling privileges based on
group membership. Users or processes in the group realtime (gid 47) are
allowed to run threads and processes with realtime scheduling priority.
For timing-sensitive, low-latency software like audio/jack, running with
realtime priority helps to avoid stutter and gaps.
PR: 239125
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D33191
This reverts commit 266f97b5e9, reversing
changes made to a10253cffe.
A mismerge of a merge to catch up to main resulted in files being
committed which should not have been.
With upcoming changes to the inpcb synchronisation it is going to be
broken. Even its current status after the move of PCB synchronization
to the network epoch is very questionable.
This experimental feature was sponsored by Juniper but ended never to
be used in Juniper and doesn't exist in their source tree [sjg@, stevek@,
jtl@]. In the past (AFAIK, pre-epoch times) it was tried out at Netflix
[gallatin@, rrs@] with no positive result and at Yandex [ae@, melifaro@].
I'm up to resurrecting it back if there is any interest from anybody.
Reviewed by: rrs
Differential revision: https://reviews.freebsd.org/D33020
NXP FlexSPI is a complex SPI controller which provides
full offload for accessing NOR Flash.
Create a Flash driver which attaches to existing FreeBSD
infrastructure and exports generic READ and WRITE disk commands.
The Flash has to be identified first to configure controller
internals. For now, only one NOR Flash chip is supported.
Future commits shall either increase number of known chips
or implement SFDP mechanism which can be used by other Flash
drivers.
Sponsored by: Alstom
Obtained from: Semihalf
Differential revision: https://reviews.freebsd.org/D33117
With the update to llvm 13 we are able to tell the compiler it can find
the SSP canary relative to the register that holds the userspace stack
pointer. As this is unused in most of the kernel it can be used here
to point to a per-thread SSP canary.
As the kernel could be built with an old toolchain, e.g. when upgrading
from 13, add a warning that the options was enabled but the compiler
doesn't support it to both the build and kernel boot.
Discussed with: emaste
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33079
Belatedly remove twa(4). It was supposed to go before 13.0, but was
overlooked.
Sponsored by: Netflix
Relnotes: yes
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33114
Belatedly remove esp(4). It was tagged as gone in 13, but was overlooked
until now.
Sponsored by: Netflix
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33115
Belatedly remove amr(4). It was slated to depart before 13.0 but was
overlooked until now.
Sponsored by: Netflix
Relnotes: yes
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33113
Belatedly remove iir(4). It was slated to go before 13, but was
overlooked.
Sponsored by: Netflix
Relnotes: yes
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33112
We'd said this was going away in 13, but was overlooked. Belatedly
remove.
Sponsored by: Netflix
Relnotes: yes
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33111
The iavf(4) driver now uses a different source base from ixl(4), since
it will be the standard VF driver for new Intel Ethernet products going
forward, including ice(4). It continues to use the iflib framework
for network drivers.
Since it now uses a different source code base, this commit adds a new
sys/dev/iavf entry, but it re-uses the existing module name so no
configuration changes are necessary.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: kbowling@
Tested by: lukasz.szczepaniak@intel.com
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D28636
in_cksum() and related routines are implemented separately for each
platform, but only i386 and arm have optimized versions. Other
platforms' copies of in_cksum.c are identical except for style
differences and support for big-endian CPUs.
Deduplicate the implementations for the rest of the platforms. This
will make it easier to implement in_cksum() for unmapped mbufs. On arm
and i386, define HAVE_MD_IN_CKSUM to mean that the MI implementation is
not to be compiled.
No functional change intended.
Reviewed by: kp, glebius
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33095
Add driver for pcf85063 real time clock. Register set and get time
methods. Parse data obtained from bus according to specification
and fill kernel structures.
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential revision: https://reviews.freebsd.org/D32817
Driver for tca6408 gpio expander over i2c bus. Expose API for
manipulating pin's direction, state and polarity inversion.
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential revision: https://reviews.freebsd.org/D32819
DP83822 is a 10/100 Texas Instruments PHY.
Link status change interrupts are supported by the driver,
however not all boards have the PHY interrupt wired.
Because of that if failure to allocate an IRQ is not treated as an error.
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential revision: https://reviews.freebsd.org/D32815
DP83867 is a 10/100/1000 Texas Instruments PHY.
Only SGMII mode is supported.
Link status changes can be checked through an interrupt generated by the PHY,
if available
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential revision: https://reviews.freebsd.org/D32813
With this change if_index can become static. There is nothing
that if_debug.c would want to isolate from if.c. Potentially
if.c wants to share everything with if_debug.c.
Move Bjoern's copyright to if.c.
Reviewed by: bz
Print some warning when export is requested for non-existing symbol.
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32878
Previously, the code would copy twice as many pointers as specified
and print pairs of them a single 64-bit pointer.
abort2 doesn't return so make the return type void
freebsd32_abort2 is in it's own file with a 2-clause BSD license
based on a discussion with Wojciech many years ago.
Reviewed by: kevans
Commit dae1713419 did not add two required lines for edonr specific
functionality to this file, causing kernel build failures if ZFS is
compiled in.
This commit should be included in an eventual MFC of dae1713419.
This make the base driver cleaner and the subclassed driver only have
related code.
Kernel config wise this is still only handled by rk805.
No functional changes intended.
Even if for now all the RTC-related register are at the same offset don't
use some hardcoded values for them but set them based on the PMIC type.
No functional changes intended.
Since the upstream merge we end up with the compiler generating calls to
memcpy (and it appears upstream LLVM does too, so this will probably
also be a problem upstream when the LLVM 13 import is finished). Like
the kernel we should just compile this file with -ffreestanding to avoid
such surprises.
Note that elf_trampoline.c does actually provide a memcpy, but it's
static. That's a bit weird, and means by the time the memcpy calls are
generated by the compiler the explicit ones have already been inlined
and the function itself GC'ed, but since using -ffreestanding is the
right thing to do for this kind of code anyway, that doesn't actually
matter.
Obtained from: https://github.com/CTSRD-CHERI/cheribsd/commit/219ddb6293c
NOTE: HEADS UP read the note below if your kernel config is not including GENERIC!!
This patch does a bit of cleanup on TCP congestion control modules. There were some rather
interesting surprises that one could get i.e. where you use a socket option to change
from one CC (say cc_cubic) to another CC (say cc_vegas) and you could in theory get
a memory failure and end up on cc_newreno. This is not what one would expect. The
new code fixes this by requiring a cc_data_sz() function so we can malloc with M_WAITOK
and pass in to the init function preallocated memory. The CC init is expected in this
case *not* to fail but if it does and a module does break the
"no fail with memory given" contract we do fall back to the CC that was in place at the time.
This also fixes up a set of common newreno utilities that can be shared amongst other
CC modules instead of the other CC modules reaching into newreno and executing
what they think is a "common and understood" function. Lets put these functions in
cc.c and that way we have a common place that is easily findable by future developers or
bug fixers. This also allows newreno to evolve and grow support for its features i.e. ABE
and HYSTART++ without having to dance through hoops for other CC modules, instead
both newreno and the other modules just call into the common functions if they desire
that behavior or roll there own if that makes more sense.
Note: This commit changes the kernel configuration!! If you are not using GENERIC in
some form you must add a CC module option (one of CC_NEWRENO, CC_VEGAS, CC_CUBIC,
CC_CDG, CC_CHD, CC_DCTCP, CC_HTCP, CC_HD). You can have more than one defined
as well if you desire. Note that if you create a kernel configuration that does not
define a congestion control module and includes INET or INET6 the kernel compile will
break. Also you need to define a default, generic adds 'options CC_DEFAULT=\"newreno\"
but you can specify any string that represents the name of the CC module (same names
that show up in the CC module list under net.inet.tcp.cc). If you fail to add the
options CC_DEFAULT in your kernel configuration the kernel build will also break.
Reviewed by: Michael Tuexen
Sponsored by: Netflix Inc.
RELNOTES:YES
Differential Revision: https://reviews.freebsd.org/D32693
AES-CBC OpenSSL assembly is used underneath.
The glue layer(ossl_aes.c) is based on CHACHA20 implementation.
Contrary to the SHA and CHACHA20, AES OpenSSL assembly logic
does not have a fallback implementation in case CPU doesn't
support required instructions.
Because of that CPU caps are checked during initialization and AES
support is advertised only if available.
The feature is available on all architectures that ossl supports:
i386, amd64, arm64.
The biggest advantage of this patch over existing solutions
(aesni(4) and armv8crypto(4)) is that it supports SHA,
allowing for ETA operations.
Sponsored by: Stormshield
Obtained from: Semihalf
Reviewed by: jhb (previous version)
Differential revision: https://reviews.freebsd.org/D32099
Not sure why these haven't been committed with the rest of the SoC Audio
project. They work sufficiently well for me.
Discussed with: manu
MFC after: 1 month
It adds the PIC functionality on top of qoriq_gpio driver.
We need a separate module since the powerpc PIC API is completely
different than on other architectures.
Two types of intr_map_data are supported:
INTR_MAP_DATA_GPIO and INTR_MAP_DATA_FDT.
This way interrupts can be allocated using the userspace gpio
interrupt allocation method, as well as directly from simplebus.
The latter can be used by devices that have its irq routed to a GPIO pin.
Obtained from: Semihalf
Sponsored by: Alstom Group