gitup writes a .gituprevision file into the shallow clone directory. Read that
file and print commit information only.
Submitted by: Michael Osipov <michael.osipov@siemens.com>
Pull Request: https://github.com/freebsd/freebsd-src/pull/449
While here, drop the redundant branch name from the git output and don't
count commits in shallow clones.
Reported by: Michael Osipov <michael.osipov@siemens.com>
MFC after: 2 weeks
Use the existing legacy PCI driver as the basis for shared code
between the legacy and modern PCI drivers. The existing virtio_pci
kernel module will contain both the legacy and modern drivers.
Changes to the virtqueue and each device driver (network, block, etc)
for V1 support come in later commits.
Update the MMIO driver to reflect the VirtIO bus method changes, but
the modern compliance can be improved on later.
Note that the modern PCI driver requires bus_map_resource() to be
implemented, which is not the case on all archs.
The hw.virtio.pci.transitional tunable default value is zero so
transitional devices will continue to be driven via the legacy
driver.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27856
Based on discussions on freebsd-arch@, enable KERN_TLS in
GENERIC on amd64, but leave it disabled via the
sysctl kern.ipc.tls.enable. Users wishing to enable
ktls must set kern.ipc.tls.enable=1
While here, fix wording in NOTES to mention that KERN_TLS
also does receive now.
Sponsored by: Netflix
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D28163
The old vendor tree was never fully merged and doing partial merge isn't
supported with git subtree merge so a new one was created.
Switch the build to use the new DTS from sys/contrib/device-tree
This also bump the DTS used to be in sync with Linux 5.9
While here change the way to get the linux version, simply hardcode
the value in sys/dts/freebsd-compatible.dts and use awk to get that
to put it in the CFLAGS.
As a bonus we now have the bindings docs available
in sys/contrib/device-tree/Bindings/ so no need to link to the Linux repo
or to the vendor tree.
Stop running ctfconvert over generated C files in the kernel by marking
them with no-ctfconvert.
This fixes warnings from ctfconvert trying to parse C files:
ctfconvert: file.c: Couldn't read ehdr: Invalid argument
Reviewed by: emaste, mmel
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D28156
usbhid(4) is disabled by default to avoid conflicts with existing USB HID
drivers. To enable it place following lines to /boot/loader.conf:
hw.usb.usbhid.enable=1
usbhid_load="YES"
Suggested by: jhb
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D28124
This is the superset of the nooptions found in the -DEBUG kernels.
Reviewed by: emaste, manu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D28152
When building the arm64 kernel for use with dtrace or hwpmc we need
to include a stack frame so they can extract a stack trace.
As with amd64 also build a stack frame in modules.
Sponsored by: Innovate UK
With newer AMD GPUs (>=Navi,Renoir) there is FPU context usage in the
amdgpu driver.
The `kernel_fpu_begin/end` implementations in drm did not even allow nested
begin-end blocks.
Submitted by: Greg V
Reviewed By: manu, hselasky
Differential Revision: https://reviews.freebsd.org/D28061
A driver can register a shrinker that will be called when the kernel
wants to free some memory.
Add support for that in linuxkpi and call the registered shrinkers
when the lowmem event is triggered.
Reviewed by: bz
Differential Revision: https://reviews.freebsd.org/D27728
Stop trying to manually calculate RID, which cannot be done correctly
by PCI_DEVFN(). Use PCI_GET_RID() method instead.
Do not use pci_find_dbsf() to go from the linux pci_dev to freebsd
device_t. First, device is readily available as dev.bsddev. Second,
using pci_find_dbsf() fails for ARI-enabled functions with large
function numbers, because PCI_SLOT()/PCI_FUNC() are for non-ARI.
Reviewed by: bz, hselasky, manu
Tested by: manu (drm)
Sponsored by: Mellanox Technologies/NVidia Networking
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27960
Everything required for remote kernel debugging over a serial
connection. For FDT-based systems, a debug port can be specified by
setting hw.fdt.dbgport to the desired device tree node in loader.conf.
For example, hw.fdt.dbgport="uart1", or
hw.fdt.dbgport="serial@ff1a0000".
Looks good: emaste
Tested by: rwatson
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27727
Remove wi(4). pccard is going away, and wi only supports PC Card
devices, though it has a minor amount of glue to also support
PCI cards. However, removing the one without removing the other
is hard, so the whole driver is being removed.
Relnotes: Yes
pccard is being removed, so remove bt3c driver since it only has PC
Card attachment. Also remove bt3cfw(8) since it's the firmware for this
driver.
Relnotes: Yes
PC Card support is being removed, so remove its attachment here. ndis
is slated to be removed entirely for 13, but that's not been done yet.
Relnotes: Yes
This change includes:
hpen - Generic / MS Windows compatible HID pen tablet driver.
hgame - Generic game controller and joystick driver.
xb360gp - Xbox360-compatible game controller driver.
Submitted by: Greg V <greg_unrelenting.technology>
Reviewed by: hselasky (as part of D27993)
hidmap is a kernel module that maps HID input usages to evdev events.
Following dependent drivers is included in the commit:
hms - HID mouse driver.
hcons - Consumer page AKA Multimedia keys driver.
hsctrl - System Controls page (Power/Sleep keys) driver.
ps4dshock - Sony DualShock 4 gamepad driver.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27993
which installs /dev/uhid# alias to hidraw character device for
compatibility with some existing uhid(4) users like Firefox.
As side effect it renames traditional uhid(4) driver to hidraw
to make possible using of common unit number allocator.
Requested by: Greg V <greg_unrelenting.technology>
Reviewed by: hselasky (as part of D27992)
This driver provides raw access to HID devices through uhid(4)-compatible
interface and is based on pre-8.x uhid(4) code. Unlike uhid(4) it does
not take devices in to monopoly ownership and allows parallel access
from other drivers.
hidraw supports Linux's hidraw-compatible interface as well.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27992
This change implements hid_if.m methods for HID-over-USB protocol [1].
Also, this change adds USBHID_ENABLED kernel option which changes
device_probe() priority and adds/removes PnP records to prefer usbhid
over ums, ukbd, wmt and other USB HID device drivers and vice-versa.
The module is based on uhid(4) driver. It is disabled by default for
now due to conflicts with existing USB HID drivers.
[1] https://www.usb.org/sites/default/files/hid1_11.pdf
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27893
hidquirk(4) is derived from usb_quirk(4) and inherits all its HID-related
functionality. It does not support ioctl(2) interface yet.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27890
This driver provides support for multiple HID driver attachments
to single HID transport backend. This ability existed in Net/OpenBSD
(uhidev and ihidev drivers) but has never been ported to FreeBSD.
Unlike Net/OpenBSD we do not use report number alone to distinct report
source but we follow MS way and use a top level collection (TLC) usage
index that report belongs to as a location key.
The driver performs child device autodiscovery based on HID report
descriptor data, proxying of HID requests from child devices to parent
transport backends and broadcasting of interrupts in backward direction.
Differential revision: https://reviews.freebsd.org/D27888
Create an abstract HID interface that provides hardware independent
access to HID capabilities and functions through the device tree.
hid_if.m resembles existing USBHID KPI and consist of next methods:
HID method USBHID variant
-----------------------------------------------------------------------
hid_intr_setup usbd_transfer_setup (INTERRUPT IN xfer)
hid_intr_unsetup usbd_transfer_unsetup (INTERRUPT IN xfer)
hid_intr_start usbd_transfer_start (INTERRUPT IN xfer)
hid_intr_stop usbd_transfer_drain (INTERRUPT IN xfer)
hid_intr_poll usbd_transfer_poll (INTERRUPT IN xfer)
hid_get_rdesc usbd_req_get_report_descriptor
hid_read No direct analog. Not intended for common use.
hid_write uhid(4) write()
hid_get_report usbd_req_get_report
hid_set_report usbd_req_set_report
hid_set_idle usbd_req_set_idle
hid_set_protocol usbd_req_set_protocol
This change is part of D27888
This does an import of quirk stubs, debugging macros from USB code and
numerous usage constants used by dependent drivers.
Besides, this change renames some functions to get a better matching
with userland library and NetBSD/OpenBSD HID code. Namely:
- Old hid_report_size() renamed to hid_report_size_max()
- New hid_report_size() calculates size of given report rather than
maximum size of all reports.
- hid_get_data_unsigned() renamed to hid_get_udata()
- hid_put_data_unsigned() renamed to hid_put_udata()
Compat shim functions are provided in usbhid.h to make possible compile
of legacy code unmodified after this change.
Reviewed by: manu, hselasky
Differential revision: https://reviews.freebsd.org/D27887
It will be used by the upcoming HID-over-i2C implementation. Should be
no-op, except hid.ko module dependency is to be added to affected drivers.
Reviewed by: hselasky, manu
Differential revision: https://reviews.freebsd.org/D27867
Only ACPI attachment is supported for now, some others depend on the
presence of smbios(4) support, which we lack on arm64.
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28009
After the removal of obsolete GDB 6.1.1 from the base system in
1c0ea326aa we no longer need to downgrade to DWARF2 debug info.
We will need to ensure that our tools (e.g. ctfconvert) handle DWARF5
prior to it becoming the default in the Clang and GCC versions we use.
Reported by: jhb
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
-mno-align-long-strings was a flag maintained by FreeBSD for the
now-deleted in-tree gcc. Upstream gcc has no such flag, so just drop
it.
The flag was originally submitted by bde and committed in 2002 (svn
r97911 & r104455). However, upstream gcc did address this same issue in
2004 (gcc svn r76694 / git 4137ba7ab7a), reducing long string alignment
in general, and to 1 with -Os.
Reviewed by: kib
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D27768
- Suppress -Wredundant-decls. Ultimately this warning is harmless in
any case, and it does not look like there is a simple way to avoid
redundant declarations in this case without a lot of header pollution
(e.g. having openzfs's shim param.h pulling in sys/kernel.h for hz).
- Suppress -Wnested-externs, which is useless anyway.
Unfortunately it was not sufficient just to modify OPENZFS_CFLAGS,
because the warning suppressions need to appear on the command line
after they are explicitly enabled by CWARNFLAGS from sys/conf/kern.mk,
but OPENZFS_CFLAGS get added before due to use of -I for the shims.
Reviewed by: markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D27685
dvl reported that "make installkernel" failed with "amd64/arm64/i386
kernel requires linker ifunc support." This test should apply to builds
only; the linker is not used at install time.
I think the same (ifunc-supporting) linker used to build the kernel
should be detected at install time in usual cases (and so not trigger
this error). However, there is no reason to disallow the install, if
for some reason the expected linker isn't the one tested at install
time.
PR: 251580
Reported by: dvl
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
eventfd is a Linux system call that produces special file descriptors
for event notification. When porting Linux software, it is currently
usually emulated by epoll-shim on top of kqueues. Unfortunately, kqueues
are not passable between processes. And, as noted by the author of
epoll-shim, even if they were, the library state would also have to be
passed somehow. This came up when debugging strange HW video decode
failures in Firefox. A native implementation would avoid these problems
and help with porting Linux software.
Since we now already have an eventfd implementation in the kernel (for
the Linuxulator), it's pretty easy to expose it natively, which is what
this patch does.
Submitted by: greg@unrelenting.technology
Reviewed by: markj (previous version)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D26668
These drivers should have been removed along with tl(4) as part of
7c897ca91f and r347918 respectively
as these fromer made sure to only ever attach to the latter, e. g.:
<...>
static int
tlphy_probe(device_t dev)
{
if (!mii_dev_mac_match(dev, "tl"))
return (ENXIO);
<...>
We have stopped using SVN, so the notes containing the old SVN revisions
are no longer populated, so fall back to purely counting the number of
commits (currently at about 255337).
Also turn the format more into what git-describe produces, with a name
first, then the number of commits and the hash last. Note that as we
don't tag anything on `main`, git describe will never produce something
useful there and finds the newest vendor tag that was merged in instead.
Sample output:
FreeBSD 13.0-CURRENT #6 main-c255126-gb81783dc98e6-dirty
FreeBSD 12.2-STABLE #0 stable/12-c243035-gd16dac42b641-dirty
MFC after: 3 weeks
Reviewed by: imp, glebius
Differential Revision: https://reviews.freebsd.org/D27751
This change introduces framework that allows to dynamically
attach or detach longest prefix match (lpm) lookup algorithms
to speed up datapath route tables lookups.
Framework takes care of handling initial synchronisation,
route subscription, nhop/nhop groups reference and indexing,
dataplane attachments and fib instance algorithm setup/teardown.
Framework features automatic algorithm selection, allowing for
picking the best matching algorithm on-the-fly based on the
amount of routes in the routing table.
Currently framework code is guarded under FIB_ALGO config option.
An idea is to enable it by default in the next couple of weeks.
The following algorithms are provided by default:
IPv4:
* bsearch4 (lockless binary search in a special IP array), tailored for
small-fib (<16 routes)
* radix4_lockless (lockless immutable radix, re-created on every rtable change),
tailored for small-fib (<1000 routes)
* radix4 (base system radix backend)
* dpdk_lpm4 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)
IPv6:
* radix6_lockless (lockless immutable radix, re-created on every rtable change),
tailed for small-fib (<1000 routes)
* radix6 (base system radix backend)
* dpdk_lpm6 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)
Performance changes:
Micro benchmarks (I7-7660U, single-core lookups, 2048k dst, code in D27604):
IPv4:
8 routes:
radix4: ~20mpps
radix4_lockless: ~24.8mpps
bsearch4: ~69mpps
dpdk_lpm4: ~67 mpps
700k routes:
radix4_lockless: 3.3mpps
dpdk_lpm4: 46mpps
IPv6:
8 routes:
radix6_lockless: ~20mpps
dpdk_lpm6: ~70mpps
100k routes:
radix6_lockless: 13.9mpps
dpdk_lpm6: 57mpps
Forwarding benchmarks:
+ 10-15% IPv4 forwarding performance (small-fib, bsearch4)
+ 25% IPv4 forwarding performance (full-view, dpdk_lpm4)
+ 20% IPv6 forwarding performance (full-view, dpdk_lpm6)
Control:
Framwork adds the following runtime sysctls:
List algos
* net.route.algo.inet.algo_list: bsearch4, radix4_lockless, radix4
* net.route.algo.inet6.algo_list: radix6_lockless, radix6, dpdk_lpm6
Debug level (7=LOG_DEBUG, per-route)
net.route.algo.debug_level: 5
Algo selection (currently only for fib 0):
net.route.algo.inet.algo: bsearch4
net.route.algo.inet6.algo: radix6_lockless
Support for manually changing algos in non-default fib will be added
soon. Some sysctl names will be changed in the near future.
Differential Revision: https://reviews.freebsd.org/D27401
Now that bhyve(8) supports UART, bvmconsole and bvmdebug are no longer needed.
This also removes the '-b' and '-g' flag from bhyve(8). These two flags were
marked deprecated in r368519.
Reviewed by: grehan, kevans
Approved by: kevans (mentor)
Differential Revision: https://reviews.freebsd.org/D27490
Similar to r366897, this uses the .incbin directive to pull in a
firmware file's contents into a .fwo file. The same scheme for
computing symbol names from the filename is used as before to maximize
compatiblity and not require rebuilding existing .fwo files for
NO_CLEAN builds. Using ld -o binary requires extra hacks in linkers
to either specify ABI options (e.g. soft- vs hard-float) or to ignore
ABI incompatiblities when linking certain objects (e.g. object files
with only data). Using the compiler driver avoids the need for these
hacks as the compiler driver is able to set all the appropriate ABI
options.
Reviewed by: imp, markj
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27579
We're looking for file content differences, so ask the question of git
more directly. This helps a lot, saving tens of thousands of fork()s,
when the builder and editor see different stat() results (e.g., UIDs),
as they might with containers.
Submitted by: Nathaniel Wesley Filardo <nwf20@cl.cam.ac.uk>
Reviewed by: bdrewery, emaste, imp
Obtained from: CheriBSD
MFC after: 3 days
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27646
The hme (Happy Meal Ethernet) driver was the onboard NIC in most
supported sparc64 platforms. A few PCI NICs do exist, but we have seen
no evidence of use on non-sparc systems.
Reviewed by: imp, emaste, bcr
Sponsored by: DARPA
Macfilter to route packets through different hooks based on sender MAC address.
Based on ng_macfilter written by Pekka Nikander
Sponsered by Retina b.v.
Reviewed by: afedorov
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D27268
linux_common.c to linux_util.c so they become available on i386.
linux_common.c defines the linux_common kernel module but this module does
not exist on i386 and linux_common.c is not included in the linux module.
linux_util.c is included in the linux_common module on amd64 and the linux
module on i386.
Remove linux_common.c from files.i386 again. It was added recently in
r367433 when the DTrace provider definitions were moved.
The V4L feature declarations were moved to linux_common in r283423.
In r367395 parts of machine dependent linux_dummy.c were moved to a new
machine independent file sys/compat/linux/linux_dummy.c and the existing
linux_dummy.c was renamed to linux_dummy_machdep.c.
Add linux_dummy_machdep.c to the linux module for i386.
Rename sys/amd64/linux32/linux_dummy.c for consistency.
Add the new linux_dummy.c to the linux module for i386.
Enable in-kernel acceleration of SHA1 and SHA2 operations on arm64 by adding
support for the ossl(4) crypto driver. This uses OpenSSL's assembly routines
under the hood, which will detect and use SHA intrinsics if they are
supported by the CPU.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27390
Make room for adding arm64 support to this driver by moving the
x86-specific feature parsing to a separate file.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27388
Implement vt_vbefb to support Vesa Bios Extensions (VBE) framebuffer with VT.
vt_vbefb is built based on vt_efifb and is assuming similar data for
initialization, use MODINFOMD_VBE_FB to identify the structure vbe_fb
in kernel metadata.
struct vbe_fb, is populated by boot loader, and is passed to kernel via
metadata payload.
Differential Revision: https://reviews.freebsd.org/D27373
ROUTE_MPATH is the new config option controlling new multipath routing
implementation. Remove the last pieces of RADIX_MPATH-related code and
the config option.
Reviewed by: glebius
Differential Revision: https://reviews.freebsd.org/D27244
Replace MAXPHYS by runtime variable maxphys. It is initialized from
MAXPHYS by default, but can be also adjusted with the tunable kern.maxphys.
Make b_pages[] array in struct buf flexible. Size b_pages[] for buffer
cache buffers exactly to atop(maxbcachebuf) (currently it is sized to
atop(MAXPHYS)), and b_pages[] for pbufs is sized to atop(maxphys) + 1.
The +1 for pbufs allow several pbuf consumers, among them vmapbuf(),
to use unaligned buffers still sized to maxphys, esp. when such
buffers come from userspace (*). Overall, we save significant amount
of otherwise wasted memory in b_pages[] for buffer cache buffers,
while bumping MAXPHYS to desired high value.
Eliminate all direct uses of the MAXPHYS constant in kernel and driver
sources, except a place which initialize maxphys. Some random (and
arguably weird) uses of MAXPHYS, e.g. in linuxolator, are converted
straight. Some drivers, which use MAXPHYS to size embeded structures,
get private MAXPHYS-like constant; their convertion is out of scope
for this work.
Changes to cam/, dev/ahci, dev/ata, dev/mpr, dev/mpt, dev/mvs,
dev/siis, where either submitted by, or based on changes by mav.
Suggested by: mav (*)
Reviewed by: imp, mav, imp, mckusick, scottl (intermediate versions)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D27225
i386 and the rest of supported architectures by defining KERNLOAD in the
vmparam.h and getting rid of magic constant in the linker script, which albeit
documented via comment but isn't programmatically accessible at a compile time.
Use KERNLOAD to eliminate another (matching) magic constant 100 lines down
inside unremarkable TU "copy.c" 3 levels deep in the EFI loader tree.
Reviewed by: markj
Approved by: markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D27355
This driver provides support for Realtek PCI SD card readers. It attaches
mmc(4) bus on card insertion and detaches it on card removal. It has been
tested with RTS5209, RTS5227, RTS5229, RTS522A, RTS525A and RTL8411B. It
should also work with RTS5249, RTL8402 and RTL8411.
PR: 204521
Submitted by: Henri Hennebert (hlh at restart dot be)
Reviewed by: imp, jkim
Differential Revision: https://reviews.freebsd.org/D26435
The arm configs that required it have been removed from the tree.
Removing this option makes the callout code easier to read and
discourages developers from adding new configs without eventtimer
drivers.
Reviewed by: ian, imp, mav
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27270
This adds an arm64 iommu interface and a driver for Arm System Memory
Management Unit version 3.2 (ARM SMMU v3.2) specified in ARM IHI 0070C
document.
Hardware overview is provided in the header of smmu.c file.
The support is disabled by default. To enable add 'options IOMMU' to your
kernel configuration file.
The support was developed on Arm Neoverse N1 System Development Platform
(ARM N1SDP), kindly provided by ARM Ltd.
Currently, PCI-based devices and ACPI platforms are supported only.
The support was tested on IOMMU-enabled Marvell SATA controller,
Realtek Ethernet controller and a TI xHCI USB controller with a low to
medium load only.
Many thanks to Konstantin Belousov for help forming the generic IOMMU
framework that is vital for this project; to Andrew Turner for adding
IOMMU support to MSI interrupt code; to Mark Johnston for help with SMMU
page management; to John Baldwin for explaining various IOMMU bits.
Reviewed by: mmel
Relnotes: yes
Sponsored by: DARPA / AFRL
Sponsored by: Innovate UK (Digital Security by Design programme)
Differential Revision: https://reviews.freebsd.org/D24618
These options need to be in the kern.opts.mk file to be alive for kernel
and module builds. This also reverts r367579 since that's not needed with
this fix: the host's bsd.opts.mk is irrelevant.
Reviewed by: brooks@
Differential Revision: https://reviews.freebsd.org/D27170
When building out-of-tree modules, it appears that the system share/mk
is used, but sys/conf/kern.mk is used. That results in MK_INIT_ALL_ZERO
being undefined. In the interest of maximum compatability, check
that MK_INIT_ALL_* and COMPILER_FEATURES are defined before comparing
their values.
Reported by: mmacy
Sponsored by: DARPA
There are two options:
- WITH_INIT_ALL_ZERO: Zero all variables on the stack.
- WITH_INIT_ALL_PATTERN: Initialize variables with well-defined patterns.
The exact pattern are a compiler implementation detail and vary by type.
They are somewhat documented in the LLVM commit message:
https://reviews.llvm.org/rL349442
I've used WITH_INIT_ALL_* to match Microsoft's InitAll feature rather
than naming them after the LLVM specific compiler flags.
In a range of consumer products, options like these are used in
both debug and production builds with debugs builds using patterns
(intended to provoke crashes on use of uninitialized values) and
production using zeros (deemed more likely to lead to harmless
misbehavior or NULL-pointer dereferences).
Reviewed by: emaste
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27131
It includes:
ACPI_HANDLE() implementation.
AC and VIDEO ACPI events notification support.
Replacement of hand-rolled GPLed _DSM method evaluation helpers
with in-base ones.
Submitted by: wulf
Differential Revision: https://reviews.freebsd.org/D26603
Move dtrace SDT definitions into linux_common module code. Also, build
linux_dummy.c into the linux_common kld -- we don't need separate
versions of these stubs for 32- and 64-bit emulation.
Reported by: several
PR: 250897
Discussed with: emaste, trasz
Tested by: John Kennedy, Yasuhiro KIMURA, Oleg Sidorkin
X-MFC-With: r367395
Differential Revision: https://reviews.freebsd.org/D27124
This fixes a potential crash in firmware 1.25.0.0 on the passive open
side during TOE operation.
Obtained from: Chelsio Communications
MFC after: 1 week
Sponsored by: Chelsio Communications
Fix build errors introduced by r367417 and r367390:
- Guard label reached only by powerpc64
- Guard vm_reserv_level_iffullpop call, that is not defined on powerpc
variants that don't support superpages
- Add missing hwpmc file, for when hwpmc is built into kernel
This provides an OpenCrypto driver for Intel QuickAssist devices. The
driver was initially ported from NetBSD and comes with a few
improvements:
- support for GMAC/AES-GCM, AES-CTR and AES-XTS, and support for
SHA/HMAC-authenticated encryption
- support for detaching the driver
- various bug fixes
- DH895X support
Discussed with: jhb
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D26963
This would be more accurately expressed as COMPAT_LINUXKPI implying or
requiring backlight, but config(8) doesn't really have a way to express
that. This fixes the build with COMPAT_LINUXKPI specified in one's kernel
config.
Currently, this supports SHA1 and SHA2-{224,256,384,512} both as plain
hashes and in HMAC mode on both amd64 and i386. It uses the SHA
intrinsics when present similar to aesni(4), but uses SSE/AVX
instructions when they are not.
Note that some files from OpenSSL that normally wrap the assembly
routines have been adapted to export methods usable by 'struct
auth_xform' as is used by existing software crypto routines.
Reviewed by: gallatin, jkim, delphij, gnn
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D26821
This uses the .incbin directive to pull in the MFS image contents.
Using assembly directly ensures that symbols can be defined with the
name and properties (such as .size) desired without having to rename
symbols, etc. via a second objcopy invocation. Since it is compiled
by the C compiler driver, it also avoids the need for all of the
EMBEDFS* make variables.
Suggested by: jrtc27
Reviewed by: kib, markj
Obtained from: CheriBSD
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D26781
This directory doesn't exist and causes gcc-6.4 to complain about
a non-existent include directory
Approved by: kevans, imp
Differential Revision: https://reviews.freebsd.org/D26846
connections over multiple paths.
Multipath routing relies on mbuf flowid data for both transit
and outbound traffic. Current code fills mbuf flowid from inp_flowid
for connection-oriented sockets. However, inp_flowid is currently
not calculated for outbound connections.
This change creates simple hashing functions and starts calculating hashes
for TCP,UDP/UDP-Lite and raw IP if multipath routes are present in the
system.
Reviewed by: glebius (previous version),ae
Differential Revision: https://reviews.freebsd.org/D26523
VMware now has arm64 support; move these to MI files in advance of
building them on arm64.
PR: 250308
Reported by: Vincent Milum Jr
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
This patch has the driver for 10Gigabit Ethernet controller in AMD
SoC. This driver is written compatible to the Iflib framework. The
existing driver is for the old version of hardware. The submitted
driver here is for the recent versions of the hardware where the Ethernet
controller is PCI-E based.
Submitted by: Rajesh Kumar <rajesh1.kumar@amd.com>
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25793
Fortuna remains the default; no functional change to GENERIC.
Big picture:
- Scalable entropy generation with per-CPU, buffered local generators.
- "Push" system for reseeding child generators when root PRNG is
reseeded. (Design can be extended to arc4random(9) and userspace
generators.)
- Similar entropy pooling system to Fortuna, but starts with a single
pool to quickly bootstrap as much entropy as possible early on.
- Reseeding from pooled entropy based on time schedule. The time
interval starts small and grows exponentially until reaching a cap.
Again, the goal is to have the RNG state depend on as much entropy as
possible quickly, but still periodically incorporate new entropy for
the same reasons as Fortuna.
Notable design choices in this implementation that differ from those
specified in the whitepaper:
- Blake2B instead of SHA-2 512 for entropy pooling
- Chacha20 instead of AES-CTR DRBG
- Initial seeding. We support more platforms and not all of them use
loader(8). So we have to grab the initial entropy sources in kernel
mode instead, as much as possible. Fortuna didn't have any mechanism
for this aside from the special case of loader-provided previous-boot
entropy, so most of these sources remain TODO after this commit.
Reviewed by: markm
Approved by: csprng (markm)
Differential Revision: https://reviews.freebsd.org/D22837
DTS must be synced with the kernel, add a freebsd,dts-version string in
the root node of each DTS that we compile so we can later in the kernel
check that it contain a correct value.
Reviewed by: imp, mmel
Differential Revision: https://reviews.freebsd.org/D26724
makeLINT.mk isn't needed or used anymore, remove it and all the files
it uses.
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D26540
APM BIOS was relevant only to early laptops (approximately P166 or
P200 and slower). These have not been relevant for a long time, and
this code has been untested for a long time (as far as I can
tell). The APM compat code in ACPI and the apm(8) command is not being
retired. Both of these items are still in use (apm(8) is more
scriptable than the replacement acpiconf, for the most part). This has
been commented out of i386 GENERIC since 2002. This code is not
relevant to any other port.
Discussed on: arch@
This change is based on the nexthop objects landed in D24232.
The change introduces the concept of nexthop groups.
Each group contains the collection of nexthops with their
relative weights and a dataplane-optimized structure to enable
efficient nexthop selection.
Simular to the nexthops, nexthop groups are immutable. Dataplane part
gets compiled during group creation and is basically an array of
nexthop pointers, compiled w.r.t their weights.
With this change, `rt_nhop` field of `struct rtentry` contains either
nexthop or nexthop group. They are distinguished by the presense of
NHF_MULTIPATH flag.
All dataplane lookup functions returns pointer to the nexthop object,
leaving nexhop groups details inside routing subsystem.
User-visible changes:
The change is intended to be backward-compatible: all non-mpath operations
should work as before with ROUTE_MPATH and net.route.multipath=1.
All routes now comes with weight, default weight is 1, maximum is 2^24-1.
Current maximum multipath group width is statically set to 64.
This will become sysctl-tunable in the followup changes.
Using functionality:
* Recompile kernel with ROUTE_MPATH
* set net.route.multipath to 1
route add -6 2001:db8::/32 2001:db8::2 -weight 10
route add -6 2001:db8::/32 2001:db8::3 -weight 20
netstat -6On
Nexthop groups data
Internet6:
GrpIdx NhIdx Weight Slots Gateway Netif Refcnt
1 ------- ------- ------- --------------------------------------- --------- 1
13 10 1 2001:db8::2 vlan2
14 20 2 2001:db8::3 vlan2
Next steps:
* Land outbound hashing for locally-originated routes ( D26523 ).
* Fix net/bird multipath (net/frr seems to work fine)
* Add ROUTE_MPATH to GENERIC
* Set net.route.multipath=1 by default
Tested by: olivier
Reviewed by: glebius
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D26449
dmi function are used to get smbios values.
The DRM subsystem and drivers use it to enabled (or not) quirks.
Reviewed by: hselasky
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26046
Add backlight function to linuxkpi.
Graphics drivers expose the backlight of the panel directly so allow them to use the backlight subsystem so
user can use backlight(8) to configure them.
Reviewed by: hselasky
Relnotes: yes
Differential Revision: The FreeBSD Foundation
Driver for pwm-backlight compatible device.
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26252
This is a simple subsystem that allow drivers to register as a backlight.
Each backlight creates a device node under /dev/backlight/backlightX and
an alias based on the name provided.
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26250
This is mostly needed for a common arm64/amd64 iommu code.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D26587
LLVM 11 changed the meaning of '-O' from '-O2' to '-O1', which resulted
in debug kernels (with 'makeoptions DEBUG=-g') being built with inlining
disabled, causing severe performance hit.
The -O2 was already being used for building amd64, powerpc, and powerpcspe.
Discussed with: jrtc27, arichardson, bdragon, jhibbits
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D26471
The NOTES files have a bunch of hint lines that are removed when
generating LINT. However, we can achieve the same effect by prepending
each of the lines with 'envvar' so the NOTES files become standard
config(8) files. No functional changes as the sed script to generate
the LINT files filters these either way.
Suggested by: kevans
We left these in the clean rule to avoid having stale files remain in
working trees, but enough time has now passed that it's no longer
relevant.
Discussed with: imp
The TCG implementation of mtmsrd in qemu blindly copies the entire register
to the MSR, instead of the specific bit positions listed in the ISA.
This means that qemu will prematurely switch endian out from under the
running code instead of waiting for the rfid, causing an immediate trap
as it attempts to interpret the next instruction in the wrong endianness.
To work around this, ensure PSL_LE is still set before doing the mtmsrd.
In the future, we may wish to just turn off translation and unconditionally
use rfid to switch to the ofmsr instead of quasi-switching to the ofmsr.
Add a new platform option so this can be disabled. (And so that we can
conditonalize additional QEMU-specific hacks in the platform code.)
Sponsored by: Tag1 Consulting, Inc.
This is the initial set up for PowerPC64LE.
The current plan is for this arch to remain experimental for FreeBSD 13.
This started as a weekend learning project for me and kinda snowballed from
there.
(More to follow momentarily.)
Reviewed by: imp (earlier version), emaste
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D26399
As with .text, the aim is to ensure that executable sections are
segregated from the rest, to avoid creation of writeable and executable
mappings. Recent versions of LLVM emit a PLT in firmware modules.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26444
Use MACHINE_CPUARCH with arm64 (aarch64) when we build code that could run
on any 64-bit Arm instruction set. This will simplify checks in downstream
consumers targeting prototype instruction sets.
The only place we check for MACHINE_ARCH == aarch64 is when building the
device tree blobs. As these are targeting current generation ISAs.
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D26370
There are a couple of places in the tree that directly parse the newvers.sh
script looking for the BRANCH variable. I found two locations, one in
release/Makefile and the other in bin/freebsd-version/Makefile.
While there is a good argument that BRANCH_OVERRIDE should properly
propagate in those circumstances and the new behavior is thus better, the
reality is this change broke freebsd-update's ability to find timestamps in
binaries and resulted in a large number of gratuitous changes.
Reported by: freebsd-update
Discussed with: cperciva
MFC after: 1 day
freebsd-update(8) builds, where BRANCH is suffixed with -p0 for
builds.
Noticed by: gordon
With help from: cperciva
MFC after: 3 days
MFC note: before 12.2-BETA2
Sponsored by: Rubicon Communications, LLC (netgate.com)
This option was marked as broken because our riscv64-xtoolchain-gcc
package lacked support. Since we are moving away from xtoolchain gcc in
favor of freebsd-gcc9, there should be no issue in enabling this option
by default.
Notably, this enables -Wformat errors.
Reviewed by: kp, jhb
Differential Revision: https://reviews.freebsd.org/D26320
A PL061 is a simple 8 pin GPIO controller. This GPIO device is used to
signal an internal request for shutdown on some virtual machines including
Arm-based Amazon EC2 instances.
Submitted by: Ali Saidi <alisaidi_amazon.com> (previouss version)
Reviewed by: Ali Saidi, manu
Differential Revision: https://reviews.freebsd.org/D24065
Work around llvm 11 miscompile in 32 bit powerpc that appears to cause ifuncs
to branch to the wrong address by forcing -O2. This worked in previous
versions because -O was mapped to -O2 previously (but is now -O1.)
While here, remove the old temporary workaround from r224882 that does the
opposite thing for powerpc non-DEBUG kernels, bringing it in line with other
platforms that compile at -O2.
This fixes kernel boot on powerpc and powerpcspe after the llvm11 transition.
Sponsored by: Tag1 Consulting, Inc.
Allwinner USB DRD is based on the Mentor USB OTG controller, with a
different register layout and a few missing registers.
The code is by Andrew Turner (andrew).
Reviewed by: hselasky, manu
Obtained from: andrew
MFC after: 5 weeks
Differential Revision: https://reviews.freebsd.org/D5881
This package is intended to be used with ice(4) version 0.26.16. That
update will happen in a forthcoming commit.
MFC after: 3 days
Sponsored by: Intel Corporation
Make sure that building dev/sdhci/sdhci_fsl_fdt.c has all the right
dependencies until a proper fix can be made.
Sponsored by: Mellanox Technologies // NVIDIA Networking
Implement support for an eSDHC controller found in NXP QorIQ Layerscape SoCs.
This driver has been tested with NXP LS1046A and LX2160A (Honeycomb board),
which is incompatible with the existing sdhci_fsl driver (aiming at older
chips from this family). As such, it is not intended as replacement for
the old driver, but rather serves as an improved alternative for SoCs that
support it.
It comes with support for both PIO and Single DMA modes and samples the
clock from the extres clk API.
Submitted by: Artur Rojek <ar@semihalf.com>
Reviewed by: manu, mmel, kibab
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D26153
When using relative paths for the linker we have to transform the name
since clang does not like -fuse-ld=ld.lld and instead requires -fuse-ld=lld
(the same also applies for ld.bfd).
I went through the merge and found the rest of the instances where
${MACHINE_ARCH} == "powerpc" was being used to detect 32-bit and adjusted
the rest of the instances to also check for powerpcspe.
mips32* will probably want to do the same.
Sponsored by: Tag1 Consulting, Inc.
This is needed so that setting LD/XLD is not ignored when linking with $CC
instead of directly using $LD. Currently only clang accepts an absolute
path for -fuse-ld= (Clang 12+ will add a new --ld-path flag), so we now
warn when building with GCC and $LD != "ld" since that might result in the
wrong linker being used.
We have been setting XLD=/path/to/cheri/ld.lld in CheriBSD for a long time and
used a similar version of this patch to avoid linking with /usr/bin/ld.
This change is also required when building FreeBSD on an Ubuntu with Clang:
In that case we set XCC=/usr/lib/llvm-10/bin/clang and since
/usr/lib/llvm-10/bin/ does not contain a "ld" binary the build fails with
`clang: error: unable to execute command: Executable "ld" doesn't exist!`
unless we pass -fuse-ld=/usr/lib/llvm-10/bin/ld.lld.
This change passes -fuse-ld instead of copying ${XLD} to WOLRDTMP/bin/ld
since then we would have to ensure that this file does not exist while
building the bootstrap tools. The cross-linker might not be compatible with
the host linker (e.g. when building on macos: host-linker= Mach-O /usr/bin/ld,
cross-linker=LLVM ld.lld).
Reviewed By: brooks, emaste
Differential Revision: https://reviews.freebsd.org/D26055
The most awkward bit in this patch is the bootstrapping of m4:
We can't simply use the host version of m4 since that is not compatible
with the flags passed by lex (at least on macOS, possibly also on Linux).
Therefore we need to bootstrap m4, but lex needs m4 to build and m4 also
depends on lex (which needs m4 to generate any files). To work around this
cyclic dependency we can build a bootstrap version of m4 (with pre-generated
files) then use that to build the real m4.
This patch also changes the xz/unxz/dd tools to always use the host version
since the version in the source tree cannot easily be bootstrapped on macOS
or Linux.
Reviewed By: brooks, imp (earlier version)
Differential Revision: https://reviews.freebsd.org/D25992
The primary benefit is maintaining a completely shared
code base with the community allowing FreeBSD to receive
new features sooner and with less effort.
I would advise against doing 'zpool upgrade'
or creating indispensable pools using new
features until this change has had a month+
to soak.
Work on merging FreeBSD support in to what was
at the time "ZFS on Linux" began in August 2018.
I first publicly proposed transitioning FreeBSD
to (new) OpenZFS on December 18th, 2018. FreeBSD
support in OpenZFS was finally completed in December
2019. A CFT for downstreaming OpenZFS support in
to FreeBSD was first issued on July 8th. All issues
that were reported have been addressed or, for
a couple of less critical matters there are
pull requests in progress with OpenZFS. iXsystems
has tested and dogfooded extensively internally.
The TrueNAS 12 release is based on OpenZFS with
some additional features that have not yet made
it upstream.
Improvements include:
project quotas, encrypted datasets,
allocation classes, vectorized raidz,
vectorized checksums, various command line
improvements, zstd compression.
Thanks to those who have helped along the way:
Ryan Moeller, Allan Jude, Zack Welch, and many
others.
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25872
An internet draft titled "Towards Remote Procedure Call Encryption By Default"
describes how TLS is to be used for Sun RPC, with NFS as an intended use case.
This patch adds client and server support for this to the kernel RPC,
using KERN_TLS and upcalls to daemons for the handshake, peer reset and
other non-application data record cases.
The upcalls to the daemons use three fields to uniquely identify the
TCP connection. They are the time.tv_sec, time.tv_usec of the connection
establshment, plus a 64bit sequence number. The time fields avoid problems
with re-use of the sequence number after a daemon restart.
For the server side, once a Null RPC with AUTH_TLS is received, kernel
reception on the socket is blocked and an upcall to the rpctlssd(8) daemon
is done to perform the TLS handshake. Upon completion, the completion
status of the handshake is stored in xp_tls as flag bits and the reply to
the Null RPC is sent.
For the client, if CLSET_TLS has been set, a new TCP connection will
send the Null RPC with AUTH_TLS to initiate the handshake. The client
kernel RPC code will then block kernel I/O on the socket and do an upcall
to the rpctlscd(8) daemon to perform the handshake.
If the upcall is successful, ct_rcvstate will be maintained to indicate
if/when an upcall is being done.
If non-application data records are received, the code does an upcall to
the appropriate daemon, which will do a SSL_read() of 0 length to handle
the record(s).
When the socket is being shut down, upcalls are done to the daemons, so
that they can perform SSL_shutdown() calls to perform the "peer reset".
The rpctlssd(8) and rpctlscd(8) daemons require a patched version of the
openssl library and, as such, will not be committed to head at this time.
Although the changes done by this patch are fairly numerous, there should
be no semantics change to the kernel RPC at this time.
A future commit to the NFS code will optionally enable use of TLS for NFS.
Allow to dynamically grow the amount of fibs in each vnet.
This change alters current behavior. Currently, if one defines
ROUTETABLES > 1 in the kernel config, each vnet will be created
with the number of fibs defined in the kernel config.
After this commit vnets will be created with fibs=1.
Dynamic net.fibs is not compatible with net.add_addr_allfibs.
The plan is to deprecate the latter and make
net.add_addr_allfibs=0 default behaviour.
Reviewed by: glebius
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D26062
It was a driver for a USB FM tuner that was available in the market in 2002. I
wrote the driver in 2003. I've not used it since 2005 or so, so it's time to
retire this driver. No userland code ever interfaced to the special device it
created. There's no user base: the last bug I received on this driver was in
2004.
Relnotes: Yes
Add prng(9) as a replacement for random(9) in the kernel.
There are two major differences from random(9) and random(3):
- General prng(9) APIs (prng32(9), etc) do not guarantee an
implementation or particular sequence; they should not be used for
repeatable simulations.
- However, specific named API families are also exposed (for now: PCG),
and those are expected to be repeatable (when so-guaranteed by the named
algorithm).
Some minor differences from random(3) and earlier random(9):
- PRNG state for the general prng(9) APIs is per-CPU; this eliminates
contention on PRNG state in SMP workloads. Each PCPU generator in an
SMP system produces a unique sequence.
- Better statistical properties than the Park-Miller ("minstd") PRNG
(longer period, uniform distribution in all bits, passes
BigCrush/PractRand analysis).
- Faster than Park-Miller ("minstd") PRNG -- no division is required to
step PCG-family PRNGs.
For now, random(9) becomes a thin shim around prng32(). Eventually I
would like to mechanically switch consumers over to the explicit API.
Reviewed by: kib, markj (previous version both)
Discussed with: markm
Differential Revision: https://reviews.freebsd.org/D25916
These exist on the Raspberry Pi 3 and 4 and control and external IO
expander.
Reviewed by: manu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25858
The newer hardware revisions of the Raspberry Pi 4 removed the ability of
the VIA VL805 xhci controller to load its own firmware. Instead the
firmware must be installed at the appropriate time by the VideoCore
coprocessor.
Submitted by: Robert Crowston <crowston_protonmail.com>
Differential Revision: https://reviews.freebsd.org/D25261
Provide missing rules for ena_datapath.c and ena_netmap.c,
which prevented the ENA driver from building.
This issue was showing up only when building the driver statically
into the kernel.
PR: 248116
Submitted by: Artur Rojek <ar@semihalf.com>
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25796
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
APEI allows platform to report different kinds of errors to OS in several
ways. We've found that Supermicro X10/X11 motherboards report PCIe errors
appearing on hot-unplug via this interface using NMI. Without respective
driver it ended up in kernel panic without any additional information.
This driver introduces support for the APEI Generic Hardware Error Source
reporting via NMI, SCI or polling. It decodes the reported errors and
either pass them to pci(4) for processing or just logs otherwise. Errors
marked as fatal still end up in kernel panic, but some more informative.
When somebody get to native PCIe AER support implementation both of the
reporting mechanisms should get common error recovery code. Since in our
case errors happen when the device is already gone, there is nothing to
recover, so the code just clears the error statuses, practically ignoring
the otherwise destructive NMIs in nicer way.
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
QEMU's RISC-V virt machine provides syscon-power and syscon-reset
devices as the means by which to shutdown and reboot. We also need to
ensure that we have attached the syscon_generic device before attaching
any syscon_power devices, and so we introduce a new riscv_syscon device
akin to aw_syscon added in r327936. Currently the SiFive test finisher
is used as the specific implementation of such a syscon device.
Reviewed by: br, brooks (mentor), jhb (mentor)
Approved by: br, brooks (mentor), jhb (mentor)
Obtained from: CheriBSD
Differential Revision: https://reviews.freebsd.org/D25725
This device was originally used as part of the goldfish virtual hardware
platform used for emulating Android on QEMU, but is now also used as the
RTC for the RISC-V virt machine in QEMU. It provides a simple 64-bit
nanosecond timer exposed via a pair of memory-mapped 32-bit registers,
although only with 1s granularity.
Reviewed by: brooks (mentor), jhb (mentor), kp
Approved by: brooks (mentor), jhb (mentor), kp
Obtained from: CheriBSD
Differential Revision: https://reviews.freebsd.org/D25717
The EIP-97 is a packet processing module found on the ESPRESSObin. This
commit adds a crypto(9) driver for the crypto and hash engine in this
device. An initial skeleton driver that could attach and submit
requests was written by loos and others at Netgate, and the driver was
finished by me.
Support for separate AAD and output buffers will be added in a separate
commit, to simplify merging to stable/12 (where those features don't
exist).
Reviewed by: gnn, jhb
Feedback from: andrew, cem, manu
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D25417
Communicating with the Raspberry Pi firmware is currently handled by each
driver calling into the mbox driver, however the device tree is structured
such that they should be calling into a firmware driver.
Add a driver for this node with an interface to communicate to the firmware
via the mbox interface.
There is a sysctl to get the firmware revision. This is a unix date so can
be parsed with:
root@generic:~ # date -j -f '%s' sysctl -n dev.bcm2835_firmware.0.revision
Tue Nov 19 16:40:28 UTC 2019
Reviewed by: manu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25572
This adds support for the Broadcom bcm2711 PCI express controller, found
on the Raspberry Pi 4 (aka the bcm2838 SoC). The driver has only been
developed against the soldered-on VIA XHCI controller and not tested
with other end points.
Submitted by: Robert Crowston <crowston_protonmail.com>
Differential Revision: https://reviews.freebsd.org/D25068
Take advantage of Warner's nice new real GEOM aliasing system and use it for
aliased partition names that actually work.
Our canonical EBR partition name is the weird, not-default-on-x86-prior-to-
this-revision "da1p4+00001234." However, if compatibility mode (tunable
kern.geom.part.ebr.compat_aliases) is enabled (1, default), we continue to
provide the alias names like "da1p5" in addition to the weird canonical
names.
Naming partition providers was just one aspect of the COMPAT knob; in
addition it limited mutability, in part because it did not preserve existing
EBR header content aside from that of LBA 0. This change saves the EBR
header for LBA 0, as well as for every EBR partition encountered. That way,
when we write out the EBR partition table on modification, we can restore
any bootloader or other metadata in both LBA0 (the first data-containing EBR
may start after 0) as well as every logical EBR we read from the disk, and
only update the geometry metadata and linked list pointers that describe the
actual partitioning.
(This change does not add support for the 'bootcode' verb to EBR.)
PR: 232463
Reported by: Manish Jain <bourne.identity AT hotmail.com>
Discussed with: ae (no objection)
Relnotes: maybe
Differential Revision: https://reviews.freebsd.org/D24939
- Add CCM driver and clocks implementations for i.MX 8M
- Add GPC driver for iMX8
- Add clock tree for i.MX 8M Quad
- Add clocks support and new compat strings (where required) for existing i.MX 6 UART, I2C, and GPIO drivers
- Enable aarch64-compatible drivers form i.MX 6 in arm64 GENERIC kernel config
- Add dtb/imx8 kernel module with DTBs for Nitrogen8M and iMX8MQ EVK
With this patch both Nitrogen8M and iMX8MQ EVK boot with NFS root up to multiuser login prompt
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D25274
Create an acpi attachment for the DWC USB OTG device. This is present in
the Raspberry Pi 4 in the USB-C port normally used to power the board. Some
firmware presents the kernel with ACPI tables rather than FDT so we need
an ACPI attachment.
Submitted by: Greg V <greg_unrelenting.technology>
Approved by: hselasky (removal of All rights reserved)
Differential Revision: https://reviews.freebsd.org/D25203
Otherwise out-of-tree module builds will be broken for a lack of a
definition of MK_SCTP_SUPPORT.
Reported by: Michael Butler <imb@protected-networks.net>
MFC with: r362614
Sponsored by: The FreeBSD Foundation
Ports bsd.kmod.mk explicitly sets MK_KERNEL_SYMBOLS=no to prevent auto-
splitting of debuginfo from kernel modules. If that knob is set, don't
split out a .ko.debug and .ko from .ko.full; just generate a .ko with
debuginfo and leave it be.
Otherwise, with DEBUG_FLAGS set and MK_KERNEL_SYMBOLS=no, we would helpfully
strip out the debuginfo from the .ko.full and then not install it. That is
not the desired result a WITH_DEBUG port kmod build.
Reviewed by: emaste, jhb
Differential Revision: https://reviews.freebsd.org/D24835
This is in preparation for enabling a loadable SCTP stack. Analogous to
IPSEC/IPSEC_SUPPORT, the SCTP_SUPPORT kernel option must be configured
in order to support a loadable SCTP implementation.
Discussed with: tuexen
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
o Parse the ACPI DSD (Device Specific Data) graph property and record
device connections.
o Split-out FDT support to a separate file.
o Get the corresponding (FDT/ACPI) Coresight platform data in
the device drivers.
Sponsored by: DARPA, AFRL
Update the iflib version of ixl driver based on the OOT version ixl-1.11.29.
Major changes:
- Extract iflib specific functions from ixl_pf_main.c to ixl_pf_iflib.c
to simplify code sharing between legacy and iflib version of driver
- Add support for most recent FW API version (1.10), which extends FW
LLDP Agent control by user to X722 devices
- Improve handling of device global reset
- Add support for the FW recovery mode
- Use virtchnl function to validate virtual channel messages instead of
using separate checks
- Fix MAC/VLAN filters accounting
Submitted by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Reviewed by: erj@
Tested by: Jeffrey Pieper <jeffrey.e.pieper@intel.com>
MFC after: 1 week
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D24564
Summary:
Radix on AIM, and all of Book-E (currently), can do direct addressing of
user space, instead of needing to map user addresses into kernel space.
Take advantage of this to optimize the copy(9) functions for this
behavior, and avoid effectively NOP translations.
Test Plan: Tested on powerpcspe, powerpc64/booke, powerpc64/AIM
Reviewed by: bdragon
Differential Revision: https://reviews.freebsd.org/D25129
Due to the ordering of the powerpc64 linker script, we were discarding
all notes before emitting .note.gnu.build-id. This had the effect of
generating an empty build id section and breaking the kern.build_id
sysctl added in r348611.
powerpc and powerpcspe are uneffected.
PR: 246430
MFC after: 3 days
Sponsored by: Tag1 Consulting, Inc.
Honoring the kernel-supplied opt_ipsec.h in r361632 causes builds of
ipsec modules to fail if the kernel doesn't include IPSEC_SUPPORT.
However, the module can never be loaded into such a kernel, so only
build the modules if the kernel includes IPSEC_SUPPORT.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D25059
To make this simpler, set the default contents of opt_ipsec.h
for standalone modules in sys/conf/config.mk.
Reviewed by: imp
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D25046
With IFUNC support in the kernel, we can finally get rid of our poor-man's
ifunc for pmap, utilizing kobj. Since moea64 uses a second tier kobj as
well, for its own private methods, this adds a second pmap install function
(pmap_mmu_init()) to perform pmap 'post-install pre-bootstrap'
initialization, before the IFUNCs get initialized.
Reviewed by: bdragon
The ice(4) driver is the driver for the Intel E8xx series Ethernet
controllers; currently with codenames Columbiaville and
Columbia Park.
These new controllers support 100G speeds, as well as introducing
more queues, better virtualization support, and more offload
capabilities. Future work will enable virtual functions (like
in ixl(4)) and the other functionality outlined above.
For full functionality, the kernel should be compiled with
"device ice_ddp" like in the amd64 NOTES file, and/or
ice_ddp_load="YES" should be added to /boot/loader.conf so that
the DDP package file included in this commit can be downloaded
to the adapter. Otherwise, the adapter will fall back to a single
queue mode with limited functionality.
A man page for this driver will be forthcoming.
MFC after: 1 month
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21959
This reapplies logical r360944 and r360946 (reverting r360955), with fixed
copystr() stand-in replacement macro. Eventually the goal is to convert
consumers and kill the macro, but for a first step it helps if the macro is
correct.
Prior commit message:
Unlike the other copy*() functions, it does not serve to copy from one
address space to another or protect against potential faults. It's just
an older incarnation of the now-more-common strlcpy().
Add a coccinelle script to tools/ which can be used to mechanically
convert existing instances where replacement with strlcpy is trivial.
In the two cases which matched, fuse_vfsops.c and union_vfsops.c, the
code was further refactored manually to simplify.
Replace the declaration of copystr() in systm.h with a small macro
wrapper around strlcpy (with correction from brooks@ -- thanks).
Remove N redundant MI implementations of copystr. For MIPS, this
entailed inlining the assembler copystr into the only consumer,
copyinstr, and making the latter a leaf function.
Reviewed by: jhb (earlier version)
Discussed with: brooks (thanks!)
Differential Revision: https://reviews.freebsd.org/D24672
Implement support for AHCI controller found in
NXP QorIQ Layerscape SoCs.
Submitted by: Artur Rojek <ar@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D24466
This patch introduces support for Epson RX-8803 RTC controller accessible
over I2C bus. It has a resolution of 1 sec.
Support for interrupt based alarm was not implemented.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D24364
Add basic TCA6416 GPIO expander support over I2C bus. The driver handles
enabling and disabling pins, setting pin mode to IN and OUT and
toggling the pins. External interrupts are not supported.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Reviewed by: manu, mmel
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D24363
NXP LS1046A contains I2C controller compatible with Vybrid VF610.
Existing Vybrid MVF600 driver can be used to support it. For that purpose
declare driver as ofw_iicbus and add methods associated with ofw_iicbus.
For VF610 add dynamic clock prescaler calculation using clock information
from clock driver and clock frequency requested in device tree.
On the occasion add detach function and add additional error handling
in i2c_attach function.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D24361
This patch adds a GPIO controller support targeted for NXP LS1046A
SoC. The driver implements the following features:
* setting direction of each pin (IN or OUT)
* setting the mode of output pins (PUSHPULL or OPENDRAIN)
* setting the state of each output pin (1 or 0)
* reading the state of each input pin (1 or 0)
Submitted by: Kamil Koczurek <kek@semihalf.com>
Dawid Gorecki <dgr@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D24353
Driver provides probe and attach functions for LS1046A clockgen and passes
configuration information to QorIQ clockgen class. It may be used as
a reference implementation for different QorIQ clockgen devices.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Reviewed by: mmel, manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D24352
As usual, the full release notes are found on Github:
https://github.com/facebook/zstd/releases/tag/v1.4.5
Notable changes include:
* Improved decompress performance on amd64 and arm (5-10%
and 15-50%, respectively).
* '--patch-from' zstd(1) CLI option, which provides something like a very fast
version of bspatch(1) with slightly worse compression. See release notes.
In this update, I dropped the 3-year old -O0 workaround for an LLVM ARM bug;
the bug was fixed in LLVM SVN in 2017, but we didn't remove this workaround
from our tree until now.
MFC after: I won't, but feel free
Relnotes: yes
This variant get a random number up to the limit passed as the argument.
This is simply a copy of the libc version.
Sponsored-by: The FreeBSD Foundation
Reviewed by: cem, hselasky (previous version)
Differential Revision: https://reviews.freebsd.org/D24962
Remove our custom SYSTEM_LD definition. This generates program headers
that are more consistent with other architectures, and more importantly,
are in line with what loader(8) expects when loading a kernel.
As noted in https://reviews.freebsd.org/D22920, there is no apparent
reason why the kernel would need a writable text segment, so removal of
the -N flag isn't likely to cause issue.
Reviewed by: kp, br
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24909
-development is long and awkward, and is also inconsistent with prior art
from the Linux world, which uses -dev (Debian) or -devel (Red Hat). Follow
the Debian convention, and similarly for debug info packages.
Also remove redundant pkgbase development tag from includes. We already tag
include files with package=runtime,dev; there is no need to separately tag
them as dev.
Discussed with: bapt
Reviewed by: manu
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24139
This change adds Hyper-V socket feature in FreeBSD. New socket address
family AF_HYPERV and its kernel support are added.
Submitted by: Wei Hu <weh@microsoft.com>
Reviewed by: Dexuan Cui <decui@microsoft.com>
Relnotes: yes
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D24061
Assume gcc is at least 6.4, the oldest xtoolchain in the ports tree.
Assume clang is at least 6, which was in 11.2-RELEASE. Drop conditions
for older compilers.
Reviewed by: imp (earlier version), emaste, jhb
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D24802
It no longer has any in-kernel consumers via OCF. smbfs still uses
single DES directly, so sys/crypto/des remains for that use case.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24773
It no longer has any in-kernel consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24772
This was removed from IPsec in r286100 and no longer has any in-tree
consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24769
It no longer has any in-tree consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24768
Summary:
POWER9 supports two MMU formats: traditional hashed page tables, and Radix
page tables, similar to what's presesnt on most other architectures. The
PowerISA also specifies a process table -- a table of page table pointers--
which on the POWER9 is only available with the Radix MMU, so we can take
advantage of it with the Radix MMU driver.
Written by Matt Macy.
Differential Revision: https://reviews.freebsd.org/D19516
This is a general cleanup of the relocatable kernel support on powerpc,
needed to enable kernel ifuncs.
* Fix some relocatable issues in the kernel linker, and change to using
a RELOCATABLE_KERNEL #define instead of #ifdef __powerpc__ for parts that
other platforms can use in the future if they wish to have ET_DYN kernels.
* Get rid of the DB_STOFFS hack now that the kernel is relocated to the DMAP
properly across the board on powerpc64.
* Add powerpc64 and powerpc32 ifunc functionality.
* Allow AIM64 virtual mode OF kernels to run from the DMAP like other AIM64
by implementing a virtual mode restart. This fixes the runtime address on
PowerMac G5.
* Fix symbol relocation problems on post-relocation kernels by relocating
the symbol table.
* Add an undocumented method for supplying kernel symbols on powernv and
other powerpc machines using linux-style kernel/initrd loading -- If
you pass the kernel in as the initrd as well, the copy resident in initrd
will be used as a source for symbols when initializing the debugger.
This method is subject to removal once we have a better way of doing this.
Approved by: jhibbits
Relnotes: yes
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D23156
Save and restore (also known as suspend and resume) permits a snapshot
to be taken of a guest's state that can later be resumed. In the
current implementation, bhyve(8) creates a UNIX domain socket that is
used by bhyvectl(8) to send a request to save a snapshot (and
optionally exit after the snapshot has been taken). A snapshot
currently consists of two files: the first holds a copy of guest RAM,
and the second file holds other guest state such as vCPU register
values and device model state.
To resume a guest, bhyve(8) must be started with a matching pair of
command line arguments to instantiate the same set of device models as
well as a pointer to the saved snapshot.
While the current implementation is useful for several uses cases, it
has a few limitations. The file format for saving the guest state is
tied to the ABI of internal bhyve structures and is not
self-describing (in that it does not communicate the set of device
models present in the system). In addition, the state saved for some
device models closely matches the internal data structures which might
prove a challenge for compatibility of snapshot files across a range
of bhyve versions. The file format also does not currently support
versioning of individual chunks of state. As a result, the current
file format is not a fixed binary format and future revisions to save
and restore will break binary compatiblity of snapshot files. The
goal is to move to a more flexible format that adds versioning,
etc. and at that point to commit to providing a reasonable level of
compatibility. As a result, the current implementation is not enabled
by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option
for userland builds, and the kernel option BHYVE_SHAPSHOT.
Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai
Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz
Relnotes: yes
Sponsored by: University Politehnica of Bucharest
Sponsored by: Matthew Grooms (student scholarships)
Sponsored by: iXsystems
Differential Revision: https://reviews.freebsd.org/D19495
Currently functionality resides in rtsock.c, which is a controlling
interface, partially external to the routing subsystem.
Additionally, DDB-supporting functionality is > 100SLOC, which deserves
a separate file.
Given that, move this functionality to a newly-created net/route/ subdir.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D24561
Nexthop objects implementation, defined in r359823,
introduced sys/net/route directory intended to hold all
routing-related code. Move recently-introduced route_temporal.c and
private route_var.h header there.
Differential Revision: https://reviews.freebsd.org/D24597
Now that hw.machine_arch handles soft-float vs hard-float there is no
longer a reason for this config.
Submitted by: mhorne (kern.mk hunk)
Reviewed by: imp (earlier version), kp
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24544
Add driver for Broadcom "GENET" version 5, as found in BCM-2711 on
Raspberry Pi 4B. The driver is derived in part from the bcmgenet.c
driver in NetBSD, along with bcmgenetreg.h.
Reviewed by: manu
Obtained from: in part from NetBSD
Relnotes: yes, note addition
Differential Revision: https://reviews.freebsd.org/D24436
Replace our hand-rolled functions with the generic ones provided by
kern/subr_physmem.c. This greatly simplifies the initialization of
physical memory regions and kernel globals.
Tested by: nick
Differential Revision: https://reviews.freebsd.org/D24154
The arm_physmem interface found in arm's MD code provides a convenient
set of routines for adding/excluding physical memory regions and
initializing important kernel globals such as Maxmem, realmem,
phys_avail[], and dump_avail[]. It is especially convenient for FDT
systems, since we can use FDT parsing functions and pass the result
directly to one of these physmem routines. This interface is already in
use on arm and arm64, and can be used to simplify this early
initialization on RISC-V as well.
This requires only a couple trivial changes:
- Move arm_physmem_kernel_addr to arm/machdep.c. It is unused on arm64,
and manipulated entirely in arm MD code.
- Convert arm32_btop/arm64_btop to atop. This is equivalently defined
on all architectures.
- Drop the "arm" prefix.
Reviewed by: manu, emaste ("looks reasonable")
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24153
Silence the "DWARF2 can only represent one section per compilation unit"
warning in amd64 GENERIC builds by disabling Clang's debuginfo generation for
this assembler file (-g0). The message is replaced by a warning from
ctfconvert that there is no debuginfo to convert (future work).
The file contains some metadata (several ELF notes) and some code. The code
does not appear to have anything that debuginfo would aid.
I looked at the generated debuginfo (readelf -w xen-locore.o) prior to this
change, and the metadata that would be disabled are things like associated
between binary offset and code line number (not especially useful with a
disassembler), and label metadata for the entry points (not especially useful
as this is already in the symbol table).
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D24384
It is not logically dependent on "device mem", and an arm kernel
compiled without that device fails to link since the minidumpsys()
symbol is referenced by kern_dump.c.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
the dts to find the supported speeds and the regulators.
Not all DTS have every settings properly defined so host controller
will still have to add some caps themselves.
It also add a mmc_fdt_gpio_setup function which will read the cd-gpios
property and register it as the CD pin.
If the pin support interrupts one will be registered and the cd_helper
function will be called.
If the pin doesn't support interrupts the internal taskqueue will poll
for change and call the same cd_helper function.
mmc_fdt_gpio_setup will also parse the wp-gpio property and MMC drivers
can know the write-protect pin value by calling the
mmc_fdt_gpio_get_readonly function.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D23267
The file handle affinity code was configured to be used by both the
old and new NFS servers. This no longer makes sense, since there is
only one NFS server.
This patch copies a majority of the code in sys/nfs/nfs_fha.c and
sys/nfs/nfs_fha.h into sys/fs/nfsserver/nfs_fha_new.c and
sys/fs/nfsserver/nfs_fha_new.h, so that the files in sys/nfs can be
deleted. The code is simplified by deleting the function callback pointers
used to call functions in either the old or new NFS server and they were
replaced by calls to the functions.
As well as a cleanup, this re-organization simplifies the changes
required for handling of external page mbufs, which is required for KERN_TLS.
This patch should not result in a semantic change to file handle affinity.
It changes the size of TAILQ_ENTRY, which obviously impacts ABI in a variety of
ways. Some of these things are _Static_asserted. For now, mask the option
from LINT.
Reported by: crees, np, jhb
X-MFC-With: r359829
Sponsored by: Dell EMC Isilon
Add QUEUE_MACRO_DEBUG_TRACE and QUEUE_MACRO_DEBUG_TRASH as proper kernel
options. While here, alpha-sort the debug section of sys/conf/options.
Enable QUEUE_MACRO_DEBUG_TRASH in amd64 GENERIC (but not GENERIC-NODEBUG)
kernels. It is similar in nature and cost to other use-after-free pointer
trashing we do in GENERIC. It is probably reasonable to enable in any arch
GENERIC kernel that defines INVARIANTS.
This is the foundational change for the routing subsytem rearchitecture.
More details and goals are available in https://reviews.freebsd.org/D24141 .
This patch introduces concept of nexthop objects and new nexthop-based
routing KPI.
Nexthops are objects, containing all necessary information for performing
the packet output decision. Output interface, mtu, flags, gw address goes
there. For most of the cases, these objects will serve the same role as
the struct rtentry is currently serving.
Typically there will be low tens of such objects for the router even with
multiple BGP full-views, as these objects will be shared between routing
entries. This allows to store more information in the nexthop.
New KPI:
struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
These 2 function are intended to replace all all flavours of
<in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous
fib[46]-generation functions.
Upon successful lookup, they return nexthop object which is guaranteed to
exist within current NET_EPOCH. If longer lifetime is desired, one can
specify NHR_REF as a flag and get a referenced version of the nexthop.
Reference semantic closely resembles rtentry one, allowing sed-style conversion.
Additionally, another 2 functions are introduced to support uRPF functionality
inside variety of our firewalls. Their primary goal is to hide the multipath
implementation details inside the routing subsystem, greatly simplifying
firewalls implementation:
int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
All functions have a separate scopeid argument, paving way to eliminating IPv6 scope
embedding and allowing to support IPv4 link-locals in the future.
Structure changes:
* rtentry gets new 'rt_nhop' pointer, slightly growing the overall size.
* rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz.
Old KPI:
During the transition state old and new KPI will coexists. As there are another 4-5
decent-sized conversion patches, it will probably take a couple of weeks.
To support both KPIs, fields not required by the new KPI (most of rtentry) has to be
kept, resulting in the temporary size increase.
Once conversion is finished, rtentry will notably shrink.
More details:
* architectural overview: https://reviews.freebsd.org/D24141
* list of the next changes: https://reviews.freebsd.org/D24232
Reviewed by: ae,glebius(initial version)
Differential Revision: https://reviews.freebsd.org/D24232
This removes support for using DES, Triple DES, and RC4.
Reviewed by: cem, kp
Tested by: kp
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24344
This NFS lock device driver was replaced by the kernel NLM around FreeBSD7 and
has not normally been used since then.
To use it, the kernel had to be built without "options NFSLOCKD" and
the nfslockd.ko had to be deleted as well.
Since it uses Giant and is no longer used, this patch removes it.
With this device driver removed, there is now a lot of unused code
in the userland rpc.lockd. That will be removed on a future commit.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D22933
-fno-common will become the default in GCC10/LLVM11. Plenty of work has been
put in to make sure our world builds are no -fno-common clean, so let's slap
the build with this until it becomes the compiler default to ensure we don't
regress.
At this time, we will not be enforcing -fno-common on ports builds. I
suspect most ports will be or quickly become -fno-common clean as they're
naturally built against compilers that default to it, so this will hopefully
become a non-issue in due time. The exception to this, which is actually the
status quo, is that kmods built from ports will continue to build with
-fno-common.
As of the time of writing, I intend to also make stable/12 -fno-common
clean. What's been done will be MFC'd to stable/11 if it's easily applicable
and/or not much work to massage it into being functional, but I anticipate
adding -fcommon to stable/11 builds to maintain its ability to be built with
newer compilers for the rest of its lifetime instead of putting in a third
branch's worth of effort.
The mechanism that generates assym.inc and offset.inc depends on the
symbols in question being common. For now, simply force the object files
to be created with -fcommon.
-fno-common will be the default in GCC10/LLVM11.
Submitted by: arichardson
Reviewed by: kevans
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24322
Like the X5000, the main CPLD on the A1222 is the communication medium
between the CPU and the GPIO CPLD. It provides a mailbox communication
feature, along with dual-port RAM accessible from both the CPU and GPIO
CPLD, and 3 fan speed reporting registers.
Modern debuggers and process tracers use ptrace() rather than procfs
for debugging. ptrace() has a supserset of functionality available
via procfs and new debugging features are only added to ptrace().
While the two debugging services share some fields in struct proc,
they each use dedicated fields and separate code. This results in
extra complexity to support a feature that hasn't been enabled in the
default install for several years.
PR: 244939 (exp-run)
Reviewed by: kib, mjg (earlier version)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D23837
It appears that the macOS /bin/sh echo now defaults to -e and therefore the
`#define VERSTR` included newline characters instead of \n. This caused compiler
errors due to unterminated strings. Fix by using printf instead of echo.
A less fragile solution might be to bootstrap the in-tree /bin/sh but that
requires more changes.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D24136
LLD complains that the type of .dynamic was changed. Fix this by copying
the approach used in the mips64 ldscript.
I do not have hardware to test this change so I only verified that the
kernel links and the section layout looks sensible.
Reviewed By: imp, emaste
Differential Revision: https://reviews.freebsd.org/D24093
Centralize the list of generated files required by linuxkpi consumers,
into the common variable. This way, consumers that use the variable
are insulated from possible changes in the list.
Reviewed by: hselasky, imp
Sponsored by: Mellanox Technologies
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24137
The devices supported by these drivers are obsolete ISA cards, and the
sync serial protocols they supported are essentially obsolete too.
Sponsored by: The FreeBSD Foundation
