freebsd-dev/sys/dev
2011-01-04 00:10:29 +00:00
..
aac When masking direct and processor devices during an inquiry, properly 2010-12-06 17:06:21 +00:00
acpi_support acpi_fujitsu: update for P8010 2010-12-11 10:55:18 +00:00
acpica Clear GPE from a query handler if the task was deferred. 2011-01-04 00:10:29 +00:00
adb Add support for interpreting taps on ADB touchpads as a button click. 2009-11-28 17:48:25 +00:00
adlink Update d_mmap() to accept vm_ooffset_t and vm_memattr_t. 2009-12-29 21:51:28 +00:00
advansys
ae Add a 'locked' variant of the foo_start() routine and call it directly 2011-01-03 18:28:30 +00:00
age Add a 'locked' variant of the foo_start() routine and call it directly 2011-01-03 18:28:30 +00:00
agp Add a driver for the Apple Uninorth AGP host bridge found in all PowerPC 2010-10-31 18:27:05 +00:00
aha
ahb
ahci Add IDs of HighPoint RocketRAID 62x cards (Marvell 88SE9128 chips). 2010-12-08 20:35:20 +00:00
aic
aic7xxx Revert r213765. This is required because our build infrastructure uses 2010-10-14 19:19:19 +00:00
alc Add a 'locked' variant of the foo_start() routine and call it directly 2011-01-03 18:28:30 +00:00
ale Add a 'locked' variant of the foo_start() routine and call it directly 2011-01-03 18:28:30 +00:00
amd Remove extraneous semicolons, no functional changes. 2010-01-07 21:01:37 +00:00
amdsbwd amdsbwd: fix nonsensical timeout calculations 2010-05-31 09:07:23 +00:00
amdtemp
amr Fix clang warning on empty statement. 2010-07-28 16:24:11 +00:00
an Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
arcmsr Workaround build for PAE case for now - revert the PHYS 2010-11-14 05:05:41 +00:00
asmc
asr Don't zero 'Info' after setting it up in the ASR_IOCTL_COMPAT case. 2010-11-25 21:51:43 +00:00
ata Several chipset drivers alter parameters relevant for the DMA tag creation, 2010-11-28 18:53:29 +00:00
ath Fix indenting/whitespace issues introduced by me. 2010-08-15 11:40:53 +00:00
atkbdc Only use the BIOS-supplied IRQ for the atkbdc device for a child atkbd 2010-12-21 12:49:37 +00:00
auxio Enroll these drivers in multipass probing. The motivation behind this 2009-12-22 21:02:46 +00:00
bce o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control 2010-11-14 13:26:10 +00:00
bfe Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
bge - Remove the remaining support for older (in this case pre-7.0-RELEASE) 2010-11-30 21:08:59 +00:00
bktr Fix build on architectures where PAGE_SIZE is a long (sparc64, powerpc). 2010-07-13 19:27:20 +00:00
bm Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
buslogic
bwi Instead of using the AMRR ratectl algo as default for drivers which have 2010-11-06 18:17:20 +00:00
bwn Fix double ;; 2010-12-06 10:24:06 +00:00
cardbus Move the PCI-specific logic of removing a cardbus device into a 2010-01-05 20:42:25 +00:00
cas - Fix and enable support for flow control. 2010-11-22 22:06:30 +00:00
ce Revert r213793. 2010-10-13 17:38:23 +00:00
cfe Start using the 'init_static_kenv()' API provided by r198561 to initialize 2010-08-11 02:13:50 +00:00
cfi Convert Freescale PowerPC platforms to FDT convention. 2010-07-11 21:08:29 +00:00
ciss Cosmetic: make it less confusing when displaying RAID 1 level, that might 2010-10-02 08:18:19 +00:00
cm Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
cmx
coretemp Catch known CPUs before using IA32_TEMPERATURE_TARGET. 2010-08-04 00:25:13 +00:00
cp Revert r213793. 2010-10-13 17:38:23 +00:00
cpuctl
cpufreq
cs Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
ct Spell "Hz" correctly wherever it is user-visible. 2010-01-12 17:59:58 +00:00
ctau Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
cx Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
cxgb Introduce and use a new VM interface for temporarily pinning pages. This 2010-12-25 21:26:56 +00:00
cy
dc Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 23:34:31 +00:00
dcons
de Remove extraneous semicolons, no functional changes. 2010-01-07 21:01:37 +00:00
digi
dpms Attach dpms(4) to vgapm and make sure to restore DPMS state after 2009-12-15 19:58:23 +00:00
dpt Get rid of #ident, GCC 4.4 warns about it being deprecated. 2010-01-08 17:20:41 +00:00
drm Introduce and use a new VM interface for temporarily pinning pages. This 2010-12-25 21:26:56 +00:00
e1000 Correct build error. 2010-12-04 06:38:21 +00:00
ed Converted the remainder of the NIC drivers to use the mii_attach() 2010-10-15 15:00:30 +00:00
eisa
en
ep Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
esp Include <machine/ofw_machdep.h> for OF_getscsinitid(). 2010-05-10 20:02:39 +00:00
et Converted the remainder of the NIC drivers to use the mii_attach() 2010-10-15 15:00:30 +00:00
ex Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
exca CardBus instead of cardbus. 2010-01-03 23:26:29 +00:00
fatm Remove extraneous semicolons, no functional changes. 2010-01-07 21:01:37 +00:00
fb Fix segment:offset calculation of interrupt vector for relocated video BIOS 2010-09-13 19:58:46 +00:00
fdc Fix a regression from r200554, which broke fdc(4) attachment to acpi(4). 2010-05-30 03:45:41 +00:00
fdt Eliminate FDT_IMMR_VA define. 2010-07-19 18:47:18 +00:00
fe Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
firewire Remove references to MAKEDEV(8) 2010-11-15 05:25:51 +00:00
flash Add s25sl064a, an 8mb SPI flash part. 2010-08-17 16:27:13 +00:00
fxp If RX lockup workaround is enabled, fxp(4) will periodically reset 2010-12-02 03:53:29 +00:00
gem - Fix and enable support for flow control. 2010-11-22 22:13:26 +00:00
glxsb
gpio Add a GPIO driver for the Gateworks Cambria platform. 2010-11-11 20:18:33 +00:00
hatm Remove extraneous semicolons, no functional changes. 2010-01-07 21:01:37 +00:00
hifn No need to zero the softc. It's allocated with M_ZERO. 2010-12-18 14:24:24 +00:00
hme Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
hptiop Report transport type in XPT_PATH_INQ. 2010-06-19 13:41:17 +00:00
hptmv Report transport type in XPT_PATH_INQ. 2010-06-19 13:42:14 +00:00
hptrr Pass a format string to make_dev(). 2010-10-13 14:41:52 +00:00
hwpmc Fix two aliases that had the same name but were pointing to different 2010-10-04 17:22:18 +00:00
ic Merge from projects/mips to head by hand: 2010-01-11 04:13:06 +00:00
ichsmb Add support for Intel Cougar Point SMBus controller. 2010-08-27 23:24:08 +00:00
ichwd Use convenience macro for minimum and maximum value capping when 2010-12-08 15:32:54 +00:00
ida
ie Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
ieee488 Implement more of __ibsta: END and SRQI status bits (taken out of the 2010-12-10 22:20:11 +00:00
if_ndis Fix a bug introduced in r216518. The ndis_subsys field holds the PCI 2010-12-19 11:14:34 +00:00
iicbus On the Xserve G5 we find the LM75 instead of the DS1775. The core 2010-12-10 20:27:50 +00:00
iir Get rid of #ident. 2010-01-08 20:40:28 +00:00
io - Extract the IODEV_PIO interface from ia64 and make it MI. 2010-04-28 15:38:01 +00:00
ipmi Fix test for double-nul characters that terminate the string table at 2010-07-29 13:46:37 +00:00
ips Fix argument order in a call to mtx_init. 2009-12-17 00:21:12 +00:00
ipw Enable 5.5 and 11Mbit TX rates. 2010-05-11 17:14:17 +00:00
iscsi/initiator Remove the freelist, which simply duplicates some of the zone allocator's 2010-09-02 14:13:43 +00:00
isp Partially revert 208119. We were overwriting tunable settings. 2010-11-27 20:33:08 +00:00
ispfw Don't spam dmesg with "registered firmware ..." when module is compiled 2010-03-05 03:37:42 +00:00
iwi The firmware does pad notifications to an even number of bytes (at least 2010-10-23 11:26:22 +00:00
iwn Fixes for monitor mode: 2010-12-06 18:28:39 +00:00
ixgb Do not allocate multicast array memory in multicast filter 2010-08-28 00:34:22 +00:00
ixgbe This small little change is a bug that drove me nuts 2010-12-04 01:43:38 +00:00
jme Add support for JMicron JMC251/JMC261 Gigabit/Fast ethernet 2010-12-18 23:52:50 +00:00
joy
kbd Explicitly tell the compiler that we don't care about the return value 2010-10-13 11:37:12 +00:00
kbdmux Explicitly tell the compiler that we don't care about the return value 2010-10-13 11:37:12 +00:00
ksyms Update d_mmap() to accept vm_ooffset_t and vm_memattr_t. 2009-12-29 21:51:28 +00:00
le Use convenience functions where possible instead of accessing the PCI 2010-12-18 14:21:28 +00:00
led Fix an incorrect use of sbuf_overflowed() after a call to sbuf_finish(). 2010-09-09 18:35:08 +00:00
lge Converted the remainder of the NIC drivers to use the mii_attach() 2010-10-15 15:00:30 +00:00
lindev
lmc Merge amd64 and i386 bus.h and move the resulting header to x86. Replace 2010-12-20 16:39:43 +00:00
malo Use convenience functions where possible instead of accessing the PCI 2010-12-18 14:21:28 +00:00
mc146818 Remove clause 3 from Izumi Tsutsui's licenses. 2009-12-25 22:58:43 +00:00
mca
mcd
md Add reporting of GEOM::candelete BIO_GETATTR for md(4) and geom_disk(4). 2010-12-29 12:11:07 +00:00
mem
mfi When masking direct and processor devices during an inquiry, properly 2010-12-06 17:02:56 +00:00
mge Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
mii Add RDC Semiconductor R6040 10/100 PHY driver. 2010-12-30 23:50:25 +00:00
mk48txx Fix botches in r201005: 2010-01-01 22:47:53 +00:00
mlx
mly MFp4: Large set of CAM inprovements. 2010-01-28 08:41:30 +00:00
mmc Wait for commands to complete 10 times longer. This makes my A-DATA 32GB SDHC 2011-01-04 00:08:39 +00:00
mn
mps Fix setting LUN numbers in the mps(4) driver. 2010-12-11 00:36:35 +00:00
mpt Use bus_alloc_resource_any(). 2010-12-28 16:57:29 +00:00
mse
msk Fix endianness bug introduced in r205091. 2010-12-31 22:18:41 +00:00
mvs Workaround strange situation when EDMA_RESQIP register returns zero instead 2010-10-20 07:47:31 +00:00
mwl The mwl's HAL manages an array of MWL_MBSS_MAX VAPs where the first 8 are 2010-12-31 09:50:15 +00:00
mxge Fix a TSO checksum bug on mxge(4): 2010-11-22 16:43:05 +00:00
my Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
ncv
nfe Add a 'locked' variant of the foo_start() routine and call it directly 2011-01-03 18:28:30 +00:00
nge Converted the remainder of the NIC drivers to use the mii_attach() 2010-10-15 15:00:30 +00:00
nmdm
nsp
null Mark /dev/zero and /dev/null as eternal. 2010-08-06 09:47:48 +00:00
nve Converted the remainder of the NIC drivers to use the mii_attach() 2010-10-15 15:00:30 +00:00
nvram
nxge Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
ofw Return IEEE 1275 compliant error codes. 2010-11-11 13:42:46 +00:00
patm Remove extraneous semicolons, no functional changes. 2010-01-07 21:01:37 +00:00
pbio
pccard Fix typos. 2010-11-09 10:59:09 +00:00
pccbb
pcf
pci Don't whine about child drivers calling pci_enable_busmaster(). That is 2010-12-20 14:54:24 +00:00
pcn Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
pdq Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
powermac_nvram Add support for the Sharp/Micron flash chips to powermac_mvram(4). 2010-09-05 20:04:02 +00:00
ppbus bus_add_child: change type of order parameter to u_int 2010-09-10 11:19:03 +00:00
ppc Add PCI ID for MCS9901's parallel port. 2010-03-23 20:08:18 +00:00
pst
pty
puc Add Exar octal PCI UART. 2010-12-18 02:54:51 +00:00
quicc Convert Freescale PowerPC platforms to FDT convention. 2010-07-11 21:08:29 +00:00
ral Instead of using the AMRR ratectl algo as default for drivers which have 2010-11-06 18:17:20 +00:00
random Use the fpu_kern_enter() interface to properly separate usermode FPU 2010-06-05 16:00:53 +00:00
rc
re Add flow control for all re(4) controllers. re(4) controllers do 2010-11-15 00:06:19 +00:00
rndtest
rp
safe Remove extraneous semicolons, no functional changes. 2010-01-07 21:01:37 +00:00
sbni Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
scc
scd
sdhci
sec Convert Freescale PowerPC platforms to FDT convention. 2010-07-11 21:08:29 +00:00
sf Converted the remainder of the NIC drivers to use the mii_attach() 2010-10-15 15:00:30 +00:00
sge Converted the remainder of the NIC drivers to use the mii_attach() 2010-10-15 15:00:30 +00:00
si
siba Fix double ;; 2010-12-06 10:24:06 +00:00
siis Teach ahci(4), siis(4) and ATA_CAM ata(4) wrapper report to CAM residual 2010-11-08 15:36:15 +00:00
sio
sis Merge amd64 and i386 bus.h and move the resulting header to x86. Replace 2010-12-20 16:39:43 +00:00
sk Fix a long standing bug in programming station address for Yukon 2010-11-06 22:07:22 +00:00
smbus
smc Converted the remainder of the NIC drivers to use the mii_attach() 2010-10-15 15:00:30 +00:00
sn Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
snc Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
snp
sound Add device id for RDC M3010 which is found on Vortex86 SoC. 2010-12-28 17:45:43 +00:00
speaker
spibus bus_add_child: change type of order parameter to u_int 2010-09-10 11:19:03 +00:00
ste Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
stg
stge o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control 2010-11-14 13:26:10 +00:00
streams
sym - On sparc64 obtain the initiator ID from the Open Firmware device tree 2010-04-27 18:05:33 +00:00
syscons Rename a variable to match scvidctl.c. 2010-11-30 17:34:15 +00:00
tdfx Remove references to MAKEDEV(8) 2010-11-15 05:25:51 +00:00
ti Neither the page lock nor the page queues lock is required to unwire and 2010-05-03 15:51:59 +00:00
tl - Add IFM_10_2 and IFM_10_5 media via tlphy(4) only in case the respective 2010-10-24 12:51:02 +00:00
tpm Add tpm(4) driver for Trusted Platform Module. 2010-08-12 00:16:18 +00:00
trm MFp4: Large set of CAM inprovements. 2010-01-28 08:41:30 +00:00
tsec Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
twa Fix a compile problem introduced with r212008 on 32bit: 2010-09-04 16:27:14 +00:00
twe Teach twe driver to report array stripe size to GEOM. 2009-12-25 17:34:43 +00:00
tx Converted the remainder of the NIC drivers to use the mii_attach() 2010-10-15 15:00:30 +00:00
txp
uart Merge amd64 and i386 bus.h and move the resulting header to x86. Replace 2010-12-20 16:39:43 +00:00
ubsec Cast the bus_size_t to a intmax_t rather than assuming type-punning to 2010-03-29 17:26:24 +00:00
usb r184610 changed the way how TX frames are handled on AX88178 and 2010-12-08 01:24:05 +00:00
utopia
vge Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
vkbd
vr Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
vte Remove debugging leftovers. 2010-12-31 01:23:04 +00:00
vx Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
watchdog
wb Fix indentation in r213894. 2010-11-07 12:29:26 +00:00
wds
wi Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
wl Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
wpi The RX path is missing a few bus_dmamap_*() calls, this results in 2010-12-30 18:29:22 +00:00
xe Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
xen A lack of console input is not the same thing as a byte of \0 input. 2010-12-29 05:13:21 +00:00
xl Add flow control for 3C905B and newer controllers. Note, these 2010-11-14 23:53:13 +00:00