freebsd-dev/sys/mips/conf
Konstantin Belousov c75f49f7d8 Make iflib a loadable module.
iflib is already a module, but it is unconditionally compiled into the
kernel.  There are drivers which do not need iflib(4), and there are
situations where somebody might not want iflib in kernel because of
using the corresponding driver as module.

Reviewed by:	marius
Discussed with:	erj
Sponsored by:	The FreeBSD Foundation
MFC after:	2 weeks
Differential revision:	https://reviews.freebsd.org/D19041
2019-01-31 19:05:56 +00:00
..
ALFA_HORNET_UB [ar9330] ok, fine, I'll finally undo the 2011-era mistake of _BASE config files. 2016-08-03 19:18:53 +00:00
ALFA_HORNET_UB.hints
AP91 [ar71xx] rename AR724X_BASE -> std.AR724X 2017-05-31 16:32:33 +00:00
AP91.hints
AP93 [ar71xx] rename AR724X_BASE -> std.AR724X 2017-05-31 16:32:33 +00:00
AP93.hints [AP93] fix up the arge0/arge1 hints. 2017-05-29 07:57:01 +00:00
AP94 Mark the mostly redundant kernels that just pull 2015-11-19 01:58:12 +00:00
AP94.hints
AP96 Obsolete mkulzma(8) and geom_uncompress(4), their functionality 2016-02-24 00:39:36 +00:00
AP96.hints
AP121 [ar9330] ok, fine, I'll finally undo the 2011-era mistake of _BASE config files. 2016-08-03 19:18:53 +00:00
AP121.hints
AP135 [ar71xx] migrate all of the duplicate configuration out into a shared config file. 2017-06-16 00:44:23 +00:00
AP135.hints [atheros] teach these two boards about the new hints location as well. 2018-02-01 22:00:38 +00:00
AP143 Obsolete mkulzma(8) and geom_uncompress(4), their functionality 2016-02-24 00:39:36 +00:00
AP143.hints [atheros] teach these two boards about the new hints location as well. 2018-02-01 22:00:38 +00:00
AR71XX_BASE Remove redundant device ar71xx_wdog which is now included from 2018-07-05 17:11:55 +00:00
AR71XX_BASE.hints
AR91XX_BASE.hints
AR724X_BASE.hints
AR933X_BASE.hints [atheros] Fix-up the base address stuff after I did a drive-by with the calibration data location. 2018-02-01 21:58:52 +00:00
AR934X_BASE.hints [ar71xx] Start migrating the AR934x based boards over to the new world order. 2017-07-06 04:06:25 +00:00
AR5312_BASE.hints [ar531x] add default configs for AR531x ports. 2016-10-06 20:37:23 +00:00
AR5315_BASE.hints [ar531x] add default configs for AR531x ports. 2016-10-06 20:37:23 +00:00
BCM bhnd(4): Add a basic ChipCommon GPIO driver sufficient to support bwn(4) 2017-11-22 23:10:20 +00:00
BCM.hints bhnd(4): Implement NVRAM support required for PMU bring-up. 2016-08-16 21:32:05 +00:00
BERI_DE4_BASE Convert atse(4) driver for Altera Triple-Speed Ethernet MegaCore to use 2018-04-13 15:59:24 +00:00
BERI_DE4_MDROOT Mark the mostly redundant kernels that just pull 2015-11-19 01:58:12 +00:00
BERI_DE4_SDROOT Fix and shorten BERI kernel builds during universe. 2017-02-23 20:41:55 +00:00
BERI_DE4.hints
BERI_NETFPGA_MDROOT Rename BERI_TEMPLATE to std.BERI to be more like other configs. 2017-02-21 17:34:27 +00:00
BERI_SIM_BASE Fix and shorten BERI kernel builds during universe. 2017-02-23 20:41:55 +00:00
BERI_SIM_MDROOT Mark the mostly redundant kernels that just pull 2015-11-19 01:58:12 +00:00
BERI_SIM_SDROOT Mark the mostly redundant kernels that just pull 2015-11-19 01:58:12 +00:00
BERI_SIM_VIRTIO Mark the mostly redundant kernels that just pull 2015-11-19 01:58:12 +00:00
BERI_SOCKIT kernel: Fix several typos and minor errors 2017-12-27 03:23:21 +00:00
BERI_TPAD.hints
CANNA Add jz4780 AIC (Audio Interface Controller) driver. 2016-12-20 18:27:53 +00:00
CARAMBOLA2 [mips] default AR933x/AR934x to include mips24k hwpmc and limit umtx chain memory wastage. 2017-05-03 05:45:43 +00:00
CARAMBOLA2.hints [ar933x] make carambola2 work again! 2017-07-23 07:10:41 +00:00
CI20 Add note to 32-bit mips smp config files documenting the status 2018-12-19 23:22:14 +00:00
DB120 [ar71xx] New world order - don't reference ath_pci here, it's a module now 2018-02-05 04:46:36 +00:00
DB120.hints [ar71xx] Fix DB120 AHB device hints in the new world order. 2018-02-05 04:48:41 +00:00
DEFAULTS
DIR-655A1 [mips] migrate the QCA955X_BASE file to std.QCA955X, to bring this in line with 2016-08-28 04:08:26 +00:00
DIR-655A1.hints
DIR-825B1 Remove duplicate configuration values as they are already defined in 2018-07-06 13:31:06 +00:00
DIR-825B1.hints
DIR-825C1 [mips] make this compile again after all of the config changes. 2017-06-29 03:57:22 +00:00
DIR-825C1.hints [atheros] Fix DIR-825C1 to use the new hints. 2018-02-01 22:01:11 +00:00
ENH200 [ar71xx] rename AR724X_BASE -> std.AR724X 2017-05-31 16:32:33 +00:00
ENH200.hints
ERL Garbage collect AH_SUPPORT_AR5416 config option. 2019-01-25 13:48:40 +00:00
JZ4780 Add note to 32-bit mips smp config files documenting the status 2018-12-19 23:22:14 +00:00
JZ4780.hints Bring in support for Ingenic XBurst JZ4780 and 2016-11-19 17:46:18 +00:00
MALTA Split MALTA board config to big and little endian versions. 2016-11-23 11:56:22 +00:00
MALTA64 Enable /usr/lib32 for o32 binaries on mips64. 2017-01-06 23:30:54 +00:00
MALTA64EL Re-enable kernel modules for the MALTA64EL kernel configuration. 2018-09-06 19:21:31 +00:00
MALTA.hints
MALTAEL Split MALTA board config to big and little endian versions. 2016-11-23 11:56:22 +00:00
MT7620.hints Add initial configuration files for the MT7620 and RT5350 SoCs. 2015-12-25 00:58:41 +00:00
MT7620A_FDT Use 'options EXT_RESOURCES' instead of 'device ext_resources' for FDT enabled 2017-03-12 07:09:50 +00:00
MT7620N_FDT Use 'options EXT_RESOURCES' instead of 'device ext_resources' for FDT enabled 2017-03-12 07:09:50 +00:00
MT7621_FDT Use 'options EXT_RESOURCES' instead of 'device ext_resources' for FDT enabled 2017-03-12 07:09:50 +00:00
MT7628_FDT Use 'options EXT_RESOURCES' instead of 'device ext_resources' for FDT enabled 2017-03-12 07:09:50 +00:00
OCTEON1 Make iflib a loadable module. 2019-01-31 19:05:56 +00:00
OCTEON1.hints
ONIONOMEGA [ar9330] ok, fine, I'll finally undo the 2011-era mistake of _BASE config files. 2016-08-03 19:18:53 +00:00
ONIONOMEGA.hints Add I2C device hints for Onion Omega 2017-02-09 15:16:08 +00:00
PB47 Obsolete mkulzma(8) and geom_uncompress(4), their functionality 2016-02-24 00:39:36 +00:00
PB47.hints
PB92 Garbage collect AH_SUPPORT_AR5416 config option. 2019-01-25 13:48:40 +00:00
PB92.hints
PICOSTATION_M2HP [ar71xx] rename AR724X_BASE -> std.AR724X 2017-05-31 16:32:33 +00:00
PICOSTATION_M2HP.hints Fix arge0 mdio bus 2017-02-28 21:39:08 +00:00
QCA953X_BASE [atheros] Update QCA953x support to use the new hints. 2018-02-01 22:01:53 +00:00
QCA953X_BASE.hints [atheros] Update QCA953x support to use the new hints. 2018-02-01 22:01:53 +00:00
QCA955X_BASE.hints [atheros] Teach the QCA955x SoC code about the new hints stuff. 2018-02-01 22:00:05 +00:00
ROCKET_M2HP [ar71xx] rename AR724X_BASE -> std.AR724X 2017-05-31 16:32:33 +00:00
ROCKET_M2HP.hints Add Ubiquiti Rocket M support 2017-02-28 22:49:45 +00:00
ROUTERSTATION Obsolete mkulzma(8) and geom_uncompress(4), their functionality 2016-02-24 00:39:36 +00:00
ROUTERSTATION_MFS Mark the mostly redundant kernels that just pull 2015-11-19 01:58:12 +00:00
ROUTERSTATION.hints
RSPRO Obsolete mkulzma(8) and geom_uncompress(4), their functionality 2016-02-24 00:39:36 +00:00
RSPRO_MFS Mark the mostly redundant kernels that just pull 2015-11-19 01:58:12 +00:00
RSPRO_STANDALONE
RSPRO.hints
RT305X.hints
RT2880_FDT [mips] [rt2880] Add oldest Ralink MIPS SOC RT2880 support code. 2017-05-06 06:20:34 +00:00
RT3050_FDT Use 'options EXT_RESOURCES' instead of 'device ext_resources' for FDT enabled 2017-03-12 07:09:50 +00:00
RT3352_FDT Use 'options EXT_RESOURCES' instead of 'device ext_resources' for FDT enabled 2017-03-12 07:09:50 +00:00
RT3883_FDT Use 'options EXT_RESOURCES' instead of 'device ext_resources' for FDT enabled 2017-03-12 07:09:50 +00:00
RT5350_FDT Use 'options EXT_RESOURCES' instead of 'device ext_resources' for FDT enabled 2017-03-12 07:09:50 +00:00
RT5350.hints Add initial configuration files for the MT7620 and RT5350 SoCs. 2015-12-25 00:58:41 +00:00
std.AR91XX [ar71xx] migrate all of the duplicate configuration out into a shared config file. 2017-06-16 00:44:23 +00:00
std.AR724X [ar71xx] migrate all of the duplicate configuration out into a shared config file. 2017-06-16 00:44:23 +00:00
std.AR933X [atheros] Fix-up the base address stuff after I did a drive-by with the calibration data location. 2018-02-01 21:58:52 +00:00
std.AR934X [ar71xx] AR934x is a MIPS74k board - use the right hwpmc module 2018-02-05 04:47:13 +00:00
std.AR5312 In the TCP stack, the hhook(9) framework provides hooks for kernel modules 2016-10-12 02:16:42 +00:00
std.AR5315 In the TCP stack, the hhook(9) framework provides hooks for kernel modules 2016-10-12 02:16:42 +00:00
std.AR_MIPS_BASE Garbage collect AH_SUPPORT_AR5416 config option. 2019-01-25 13:48:40 +00:00
std.BERI Switch BERI Programmable Interrupt Controller to INTRNG. 2017-04-18 17:20:03 +00:00
std.MALTA Make ZSTD a real option via ZSTDIO. 2018-07-05 17:07:23 +00:00
std.QCA955X [atheros] Teach the QCA955x SoC code about the new hints stuff. 2018-02-01 22:00:05 +00:00
std.XLP Make iflib a loadable module. 2019-01-31 19:05:56 +00:00
TL-ARCHERC7V2 [mips] migrate the QCA955X_BASE file to std.QCA955X, to bring this in line with 2016-08-28 04:08:26 +00:00
TL-ARCHERC7V2.hints
TL-WDR4300 [ar71xx] get rid of ath_pci - it's built as a module now. 2017-07-28 01:17:38 +00:00
TL-WDR4300.hints [ar71xx] Fix the TL-wdr3600/tl-wdr4300 hints in the new world order. 2018-02-07 09:35:47 +00:00
TL-WR740Nv4 [ar9330] ok, fine, I'll finally undo the 2011-era mistake of _BASE config files. 2016-08-03 19:18:53 +00:00
TL-WR740Nv4.hints Add support for the TP-Link TL-WR740N v4. 2015-10-22 08:08:06 +00:00
TL-WR1043NDv2 [mips] migrate the QCA955X_BASE file to std.QCA955X, to bring this in line with 2016-08-28 04:08:26 +00:00
TL-WR1043NDv2.hints
TP-MR3020 [ar9330] ok, fine, I'll finally undo the 2011-era mistake of _BASE config files. 2016-08-03 19:18:53 +00:00
TP-MR3020.hints
TP-MR3040 Add kernel support for the TP-LINK MR3040. 2017-03-01 05:53:53 +00:00
TP-MR3040.hints Add kernel support for the TP-LINK MR3040. 2017-03-01 05:53:53 +00:00
TP-WN1043ND [mips] fix compilation of TP-WN1043ND kernel configuration 2017-12-26 19:50:23 +00:00
TP-WN1043ND.hints
WZR-300HP [ar71xx] rename AR724X_BASE -> std.AR724X 2017-05-31 16:32:33 +00:00
WZR-300HP.hints
WZR-HPAG300H Obsolete mkulzma(8) and geom_uncompress(4), their functionality 2016-02-24 00:39:36 +00:00
WZR-HPAG300H.hints
X1000 Use 'options EXT_RESOURCES' instead of 'device ext_resources' for FDT enabled 2017-03-12 07:09:50 +00:00
X1000.hints Bring in support for Ingenic XBurst JZ4780 and 2016-11-19 17:46:18 +00:00
XLP64 Update several more URLs 2017-10-29 08:17:03 +00:00
XLP.hints Remove the old ds1374 driver and use the ds13rtc driver instead. Adjust 2017-08-13 22:07:42 +00:00
XLPN32 Update several more URLs 2017-10-29 08:17:03 +00:00