freebsd-dev/sys/dev
Adrian Chadd e808ca4454 Add in descriptions for TX descriptor fields ctl8-11 - these fields
control the antenna control bits for the four TX series and the
TPC settings for TX series 1, 2, 3.

The specifics:

* The TPC setting for TX series 0 is handled in ctl0.

* TPC is currently disabled, so the per-packet TX power is
  set via the global per-rate TX power register, not per packet.

* The antenna control bits don't matter for AR5416 and later
  so they should stay 0 (which they currently do); they may
  be set for Kite but as there's no TX diversity supported
  at the moment (it requires the NIC to be built with an
  external antenna switch, matching how antenna diversity
  is done on legacy NICs), so again keep them 0.

This is in preparation for supporting per-rate TPC on the
AR5416 and later. The Kite (and soon to come Kiwi) code
sets ctl8-11 to 0x0, which doesn't have any effect at
the moment. When TPC is enabled it would result in the
second, third and fourth TX series attmpts to be done with
a TX power of 0. This commit doesn't change that; it'll
be followed up with some commits to properly set the TPC
registers appropriately.
2011-05-24 05:34:45 +00:00
..
aac We can pass a format string and args to panic(), so instead of using 2011-02-04 15:45:48 +00:00
acpi_support Fix a few more SYSCTL_PROC() that were missing a CTLFLAG type specifier. 2011-01-19 00:57:58 +00:00
acpica Decrease ACPI-fast timecounter quality to 900 and increase HPET timecounter 2011-05-23 20:12:36 +00:00
adb
adlink Remove an unnecessary INTR_MPSAFE and a comment suggesting it was 2011-01-06 21:02:14 +00:00
advansys Fix typos - remove duplicate "the". 2011-02-21 09:01:34 +00:00
ae - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
age - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
agp Do a sweep of the tree replacing calls to pci_find_extcap() with calls to 2011-03-23 13:10:15 +00:00
aha
ahb
ahci Add support for "LED" enclosure management messages, defined by the AHCI. 2011-05-17 22:07:45 +00:00
aic
aic7xxx Remove support for the Intel C Compiler from the build infrastructure. 2011-04-19 18:09:21 +00:00
alc Fix typo. 2011-05-19 23:13:08 +00:00
ale Fix typo. 2011-05-19 23:13:08 +00:00
amd
amdsbwd amdsbwd: fix nonsensical timeout calculations 2010-05-31 09:07:23 +00:00
amdtemp
amr Fix clang warning on empty statement. 2010-07-28 16:24:11 +00:00
an Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
arcmsr Update arcmsr(4) to vendor version 1.20.00.21. This release primarily 2011-04-06 20:54:26 +00:00
asmc
asr Fix typos - remove duplicate "the". 2011-02-21 09:01:34 +00:00
ata Chipset support for the new Intel Panther Point PCH, thanks 2011-05-11 20:31:27 +00:00
ath Add in descriptions for TX descriptor fields ctl8-11 - these fields 2011-05-24 05:34:45 +00:00
atkbdc Add a new knob to atkbd(4) to enable typematic rate detection on boot, 2011-05-20 22:36:17 +00:00
auxio
bce - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
bfe - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
bge Correctly disable jumbo frame support for BCM5719 A0. 2011-05-15 21:44:51 +00:00
bktr Fix typos - remove duplicate "the". 2011-02-21 09:01:34 +00:00
bm Remove some hacks to handle strange behavior of LXT 970 PHYs now better 2011-05-12 14:27:28 +00:00
buslogic Remove some always-true comparisons. 2011-01-18 15:23:16 +00:00
bwi Pull ieee80211_ratectl_node_init() calls from drivers into net80211. 2011-01-17 20:15:15 +00:00
bwn Do a sweep of the tree replacing calls to pci_find_extcap() with calls to 2011-03-23 13:10:15 +00:00
bxe - Use bus_describe_intr() to describe interrupt usage. 2011-05-12 23:26:53 +00:00
cardbus Don't explicitly list pci_write_ivar() for bus_write_ivar, the method is 2011-05-02 15:01:28 +00:00
cas Correct spelling in a comment. 2011-04-22 09:44:01 +00:00
ce Revert r213793. 2010-10-13 17:38:23 +00:00
cfe Start using the 'init_static_kenv()' API provided by r198561 to initialize 2010-08-11 02:13:50 +00:00
cfi Merge r221614,221696,221737,221840 from largeSMP project branch: 2011-05-22 20:55:54 +00:00
ciss Cosmetic: make it less confusing when displaying RAID 1 level, that might 2010-10-02 08:18:19 +00:00
cm Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
cmx
coretemp Detect and set Atom's Tj(max) to 90 if it's not the 45nm D400/D500/N400 2011-05-05 19:15:15 +00:00
cp Revert r213793. 2010-10-13 17:38:23 +00:00
cpuctl
cpufreq
cs Use bus space functions rather than inw/outw 2011-01-29 00:53:58 +00:00
ct
ctau Fix typos - remove duplicate "the". 2011-02-21 09:01:34 +00:00
cx Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
cxgb Update T3 firmware to 7.11.0 2011-03-25 20:53:02 +00:00
cxgbe Simplify t4_os_find_pci_capability. 2011-05-19 19:37:41 +00:00
cy
dc - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
dcons
de
digi
dpms
dpt
drm Fix display of the drm sysctls. 2011-04-23 23:11:44 +00:00
e1000 Add an initialization to the error variable, without 2011-05-05 17:28:45 +00:00
ed - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
eisa
en Specify a CTLTYPE_FOO so that a future sysctl(8) change does not need 2011-01-18 21:14:23 +00:00
ep Fix typos - remove duplicate "the". 2011-02-21 09:01:34 +00:00
esp Correct spelling in comments. 2011-04-22 13:56:21 +00:00
et - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
ex Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
exca
fatm Specify a CTLTYPE_FOO so that a future sysctl(8) change does not need 2011-01-18 21:14:23 +00:00
fb Use the preload_fetch_addr() and preload_fetch_size() convenience 2011-02-13 19:25:48 +00:00
fdc Fix typos - remove duplicate "the". 2011-02-21 09:01:34 +00:00
fdt Change rman_manage_region() to actually honor the rm_start and rm_end 2011-04-29 18:41:21 +00:00
fe Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
firewire Allocate the DMA memory shared between the host and the controller as 2011-03-11 22:19:49 +00:00
flash Modify the spi flash driver to allow smaller read IO sizes, but enforce 2011-02-16 20:07:44 +00:00
fxp - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
gem Remove unnecessary controller reinitialization by checking 2011-05-20 17:01:22 +00:00
glxiic Fix breakage on pc98 by redefining DEBUG(). 2011-05-15 19:04:08 +00:00
glxsb
gpio Add a GPIO driver for the Gateworks Cambria platform. 2010-11-11 20:18:33 +00:00
hatm
hifn No need to zero the softc. It's allocated with M_ZERO. 2010-12-18 14:24:24 +00:00
hme - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
hptiop Report transport type in XPT_PATH_INQ. 2010-06-19 13:41:17 +00:00
hptmv - Merge changes to the base system to support OFED. These include 2011-03-21 09:40:01 +00:00
hptrr Pass a format string to make_dev(). 2010-10-13 14:41:52 +00:00
hwpmc Merge r221279,221280 from largeSMP project: 2011-05-16 23:35:14 +00:00
ic
ichsmb Chipset support for the new Intel Panther Point PCH, thanks 2011-05-11 20:31:27 +00:00
ichwd Chipset support for the new Intel Panther Point PCH, thanks 2011-05-11 20:31:27 +00:00
ida
ie Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
ieee488 Implement more of __ibsta: END and SRQI status bits (taken out of the 2010-12-10 22:20:11 +00:00
if_ndis Revert the ndis part of r212122, windrv_stub.c already adds a MODULE_VERSION 2011-01-22 21:33:18 +00:00
iicbus There are PowerMacs which do not have a hwsensor-location property 2011-01-18 21:47:30 +00:00
iir
io - Extract the IODEV_PIO interface from ia64 and make it MI. 2010-04-28 15:38:01 +00:00
ipmi Fixed firmware revision decoding: 2011-04-14 07:14:22 +00:00
ips
ipw Enable 5.5 and 11Mbit TX rates. 2010-05-11 17:14:17 +00:00
iscsi/initiator Specify a CTLTYPE_FOO so that a future sysctl(8) change does not need 2011-01-18 21:14:23 +00:00
isp Add support QLE220 card- an 2500 lookalike. 2011-03-10 23:53:01 +00:00
ispfw Update firmware to more recent versions. 2011-01-05 23:15:22 +00:00
iwi sysctl(9) cleanup checkpoint: amd64 GENERIC builds cleanly. 2011-01-12 19:53:56 +00:00
iwn Only update the scheduler's byte count table for aggregation queues. 2011-05-15 08:09:36 +00:00
ixgb Fix typos - remove duplicate "the". 2011-02-21 09:01:34 +00:00
ixgbe Add a #define for driver portability to older OS 2011-04-28 23:21:40 +00:00
jme - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
joy
kbd Explicitly tell the compiler that we don't care about the return value 2010-10-13 11:37:12 +00:00
kbdmux Explicitly tell the compiler that we don't care about the return value 2010-10-13 11:37:12 +00:00
ksyms Promote ksyms_map() and ksyms_unmap() to general facility 2011-03-28 12:48:33 +00:00
le Use convenience functions where possible instead of accessing the PCI 2010-12-18 14:21:28 +00:00
led MFgraid/head r218174: 2011-03-24 08:56:12 +00:00
lge - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
lindev
lmc Merge amd64 and i386 bus.h and move the resulting header to x86. Replace 2010-12-20 16:39:43 +00:00
malo Do a sweep of the tree replacing calls to pci_find_extcap() with calls to 2011-03-23 13:10:15 +00:00
mc146818
mca
mcd
md Move the ZERO_REGION_SIZE to a machine-dependent file, as on many 2011-05-13 19:35:01 +00:00
mem Add reader/writer lock around mem_range_attr_get() and mem_range_attr_set(). 2011-01-17 22:58:28 +00:00
mfi When masking direct and processor devices during an inquiry, properly 2010-12-06 17:02:56 +00:00
mge Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
mii - There's no need for nibbletab to be static, it's const however. 2011-05-14 20:31:04 +00:00
mk48txx Add support for MK48T37. 2011-05-15 13:17:08 +00:00
mlx
mly
mmc Fix 32bit bit fields handling. This fixes card serial number fetching. 2011-01-17 19:31:34 +00:00
mn
mps Silence 'out of chain frames' warnings and bump the number of frames. 2011-02-25 17:30:25 +00:00
mpt Correct spelling. 2011-04-22 09:59:16 +00:00
mse
msk When MTU is changed, check whether driver should be reinitialized or 2011-05-23 21:56:04 +00:00
mvs Fix some English grammar. 2011-04-19 10:57:40 +00:00
mwl Revert r220907 and r220915. 2011-04-22 00:44:27 +00:00
mxge Fix a bug in mxge's LRO which can cause dup acks to 2011-04-07 13:49:44 +00:00
my Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
ncv
nfe - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
nge - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
nmdm
nsp
null Move the ZERO_REGION_SIZE to a machine-dependent file, as on many 2011-05-13 19:35:01 +00:00
nve - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
nvram
nvram2env Import nvram2env, a device driver which imports various NVRAM-style 2011-04-03 11:55:48 +00:00
nxge Fix typos - remove duplicate "the". 2011-02-21 09:01:34 +00:00
ofw Return IEEE 1275 compliant error codes. 2010-11-11 13:42:46 +00:00
patm Fix a few more SYSCTL_PROC() that were missing a CTLFLAG type specifier. 2011-01-19 00:57:58 +00:00
pbio
pccard Fix typos. 2010-11-09 10:59:09 +00:00
pccbb sysctl(9) cleanup checkpoint: amd64 GENERIC builds cleanly. 2011-01-12 19:53:56 +00:00
pcf
pci Renamed PCI_INTERFACE_XHCI to PCIP_SERIALBUS_USB_XHCI and moved it 2011-05-17 11:23:43 +00:00
pcn - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
pdq Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
powermac_nvram Add support for the Sharp/Micron flash chips to powermac_mvram(4). 2010-09-05 20:04:02 +00:00
ppbus bus_add_child: change type of order parameter to u_int 2010-09-10 11:19:03 +00:00
ppc - Add support for MosChip 9865 Single 1284 Printer port 2011-02-19 17:38:51 +00:00
pst
pty Finish r210923, 210926. Mark some devices as eternal. 2011-01-04 10:59:38 +00:00
puc Add support for the SIIG Cyber 2S PCIe adapter. It is based on an 2011-05-19 11:41:12 +00:00
quicc Convert Freescale PowerPC platforms to FDT convention. 2010-07-11 21:08:29 +00:00
ral Don't hardcode assumptions about basic rates, similar to what the rt2661 2011-04-09 14:45:50 +00:00
random Fix typos - remove duplicate "the". 2011-02-21 09:01:34 +00:00
rc
re Do a sweep of the tree replacing calls to pci_find_extcap() with calls to 2011-03-23 13:10:15 +00:00
rndtest
rp
safe
sbni Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
scc Recognize the SAB 82532 found in Fujitsu PRIMEPOWER650 and 900. 2011-05-15 13:27:38 +00:00
scd
sdhci Force DMA for controller found in Lenovo T510 (probably in others too). 2011-02-27 13:58:20 +00:00
sec Convert Freescale PowerPC platforms to FDT convention. 2010-07-11 21:08:29 +00:00
sf - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
sge - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
si
siba Do a sweep of the tree replacing calls to pci_find_extcap() with calls to 2011-03-23 13:10:15 +00:00
siis Fix some English grammar. 2011-04-19 10:57:40 +00:00
sio Based on discussions on the svn-src mailing list, rework r218195: 2011-02-08 00:16:36 +00:00
sis - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
sk Allocate the DMA memory shared between the host and the controller as 2011-03-11 22:21:12 +00:00
smbus
smc Converted the remainder of the NIC drivers to use the mii_attach() 2010-10-15 15:00:30 +00:00
sn Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
snc Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
snp
sound usb: change to one-pass probing of device drivers 2011-05-18 07:40:12 +00:00
speaker
spibus bus_add_child: change type of order parameter to u_int 2010-09-10 11:19:03 +00:00
ste - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
stg
stge Allocate the DMA memory shared between the host and the controller as 2011-03-11 22:23:46 +00:00
streams After the r219999 is merged to stable/8, rename fallocf(9) to falloc(9) 2011-04-01 13:28:34 +00:00
sym More spelling fixes. 2011-04-22 12:46:39 +00:00
syscons Move VT switching hack for suspend/resume from bus drivers to syscons.c 2011-05-09 18:46:49 +00:00
tdfx Remove references to MAKEDEV(8) 2010-11-15 05:25:51 +00:00
ti - Allocate the DMA memory shared between the host and the controller as 2011-03-11 22:32:17 +00:00
tl - Add IFM_10_2 and IFM_10_5 media via tlphy(4) only in case the respective 2010-10-24 12:51:02 +00:00
tpm Add tpm(4) driver for Trusted Platform Module. 2010-08-12 00:16:18 +00:00
trm
tsec Don't use the MAC address in the device tree if it's all zeroes 2011-01-28 23:40:13 +00:00
twa Fix a compile problem introduced with r212008 on 32bit: 2010-09-04 16:27:14 +00:00
twe
tx - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
txp Do a sweep of the tree replacing calls to pci_find_extcap() with calls to 2011-03-23 13:10:15 +00:00
uart Recognize the SAB 82532 found in Fujitsu PRIMEPOWER650 and 900. 2011-05-15 13:27:38 +00:00
ubsec Cast the bus_size_t to a intmax_t rather than assuming type-punning to 2010-03-29 17:26:24 +00:00
usb usb: change to one-pass probing of device drivers 2011-05-18 07:40:12 +00:00
utopia
vge Datasheet says vge(4) controllers support DAC but it seems that's 2011-05-20 18:27:13 +00:00
vkbd
vr - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
vte - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
vx Fix typos - remove duplicate "the". 2011-02-21 09:01:34 +00:00
vxge Add in support for multicast. 2011-05-03 15:58:24 +00:00
watchdog - Add the possibility to reuse the already last used timeout when patting 2011-04-27 16:43:03 +00:00
wb - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
wds
wi sysctl(8) should use the CTLTYPE to determine the type of data when 2011-01-19 17:04:07 +00:00
wl Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
wpi No need for htole32(), which is an uint8_t. 2011-05-01 18:41:57 +00:00
xe Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
xen Fix msleep() usage in Xen balloon driver to not wake up on every HZ tick. 2011-05-13 03:40:16 +00:00
xl Fix build. 2011-05-07 04:40:44 +00:00