Sorting eucJP text with "sort" resulted in an illegal sequence while
"gsort" worked. This was traced back to mbrtowc handling which was
broken for eucJP (probably eucCN, eucKR, and eucTW as well). This
small fix took hours to figure out. The OR operation to build the
wide character requires an unsigned character to work correctly. The
euc wcrtowc conversion is probably broken upstream in Illumos as well.
Triggered by: misc/freebsd-doc-ja in ports (encoded in eucJP)
Submitted by: marino
Obtained from: DragonflyBSD
In pfctl_set_debug() we used 'level' without ever initialising it.
We correctly parsed the option, but them failed to actually assign the parsed
value to 'level' before performing to ioctl() to configure the debug level.
PR: 202996
Submitted by: Andrej Kolontai
The output of "locale charmap" is identical to the result of
nl_langinfo (CODESET) for any given locale. The logic for returning the
codeset was very simplistic. It just returned portion of the locale name
after the period (e.g. en_FR.ISO8859-1 returned "ISO8859-1").
When softlinks were added to locales, this broke. e.g.:
en_US returned ""
en_FR.UTF8 returned "UTF8"
en_FR.UTF-8 returned "UTF-8"
zh_Hant_HK.Big5HKSCS returned "Big5HKSCS"
zh_Hant_TW.Big5 returned "Big5"
es_ES@euro returned ""
In order to fix this properly, the named locale cannot be used to
determine the encoding. This information was almost available in the
rune data. Unfortunately, all the single byte encodings were listed
as "NONE" encoding.
So I adjusted localedef tool to provide more information about the
encoding. For example, instead of "NONE", the LC_CTYPE used by
fr_FR.ISO8859-15 is now encoded as "NONE:ISO8859-15". The locale
handlers now check if the first four characters of the encoding is
"NONE" and if so, treats it as a single-byte encoding.
The nl_langinfo handling of CODESET was adjusting accordingly. Now the
following is returned:
en_US returns "ISO8859-1"
fr_FR.UTF8 returns "UTF-8"
fr_FR.UTF-8 returns "UTF-8"
zh_Hant_HK.Big5HKSCS returns "Big5"
zh_Hant_TW.Big5 returns "Big5"
es_ES@euro returns "ISO8859-15"
as before, "C" and "POSIX" locales return "US-ASCII". This is a big
improvement. The result of nl_langinfo can never be a zero-length
string and it will always exclusively one of the values of the
character maps of /usr/src/tools/tools/locale/etc/final-maps.
Submitted by: marino
Obtained from: DragonflyBSD
Certain invalid operations trigger hardware error conditions. Error
conditions that only halt one channel can be detected and recovered by
resetting the channel. Error conditions that halt the whole device are
generally not recoverable.
Add a sysctl to inject channel-fatal HW errors,
'dev.ioat.<N>.force_hw_error=1'.
When a halt due to a channel error is detected, ioat(4) blocks new
operations from being queued on the channel, completes any outstanding
operations with an error status, and resets the channel before allowing
new operations to be queued again.
Update ioat.4 to document error recovery; document blockfill introduced
in r290021 while we are here; document ioat_put_dmaengine() added in
r289907; document DMA_NO_WAIT added in r289982.
Sponsored by: EMC / Isilon Storage Division
When -C was introduced in r114137 the plan was to have -C and -c being used for
"create" due to a typo in FreeBSD <= 4.8 a temporary compatibility hack has been
added to make -c being like -G aka GLOB and a warning was issued for the user to
be aware of the futur change for -c.
12 years later it is more than time to remove that hack and finish the what was
intent in r114137
Submitted by: Alexandre Perrin <alex@kaworu.ch>
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D4000
whether an error is recoverable. Always re-dirty the buffer on errors
from write requests. The invalidation we used to do for errors not EIO
doesn't need to be done for a device that's really gone, since that's
done in a different path.
Reviewed by: mckusick@, kib@
This can have important debugging information such as 'cc: not found' or
'ccache: error: Could not find compiler "cc" in PATH'.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
mips24k/mips74k document that we need an explicit SYNC so to order
things correctly, even with access to uncachable memory.
We were doing calls to SYNC in the cache ops (inv, wbinv) but we
weren't doing it for uncachable memory.
When I ported this code from netbsd I was .. slightly mips74k greener.
I used writethrough because (a) it's what netbsd did, and (b) if I used
writethrough then things "didn't work."
Fast-forward a couple years, more MIPS hacking and a whole lot more
understanding of the bus APIs (the last few commits notwithstanding;
it's been a long week, ok?) and I have this working for arge,
argemdio, spi and ath. Hans has it working for USB. The ath barrier
code will come in a later commit.
This gets the routing throughput up from 220mbit -> 337mbit.
I'm sure the bridging throughput will be similarly improved.
Tested:
* QCA955x SoC, routing workload.
* use barriers in a slightly better fashion. You can blame this
glass of whiskey on putting barriers in the wrong spot. Grr adrian.
* steal/rewrite the mdio busy check from ag7100 from openwrt and
refactor the existing code out. This is .. more correct.
This seems to fix the boot-to-boot variation that I've been seeing
and it quietens the switch port status flapping.
Tested:
* QCA9558 SoC (AP135.)
Obtained from: Linux OpenWRT
This driver and the linux ag71xx driver both treat the transmit ring
as a circular linked list of descriptors. There's no "end" pointer
that is ever NULL - instead, it expects the MAC to hit a finished
descriptor (ARGE_DESC_EMPTY) and stop.
Now, since it's a circular buffer, we may end up with the hardware
hitting the beginning of our multi-descriptor frame before we've finished
setting it up. It then DMA's it in, starts sending it, and we finish
writing out the new descriptor. The hardware may then write its
completion for the next descriptor out; then we do, and when we next
read it it'll show up as "not done" and transmit completion stops.
This unfortunately manifests itself as the transmit queue always
being active and a massive TX interrupt storm. We need to actively
ACK packets back from the transmit engine and if we don't (eg because
we think the transmit isn't finished but it is) then the unit will
just keep generating interrupts.
I hit this finally with the below testing setup. This fixed it for me.
Strictly speaking I should put in a sync in between writing out all of
the descriptors and writing out that final descriptor.
Tested:
* QCA9558 SoC (AP135 reference board) w/ arge1 + vlans acting as a
router, and iperf -d (tcp, bidirectional traffic.)
Obtained from: Linux OpenWRT (ag71xx_main.c.)
The MIPS busdma sync operations currently are a big no-op on coherent memory.
This isn't strictly correct behaviour as we need a SYNC in here to ensure that
the writes have finished and are visible in main memory before the MMIO accesses
occur. This will have to be addressed in a later commit.
But, before that happens, let's at least do a flush here to make things
more "correct".
This is required for even remotely sensible behaviour on mips74k with
write-through memory enabled.
The mips74k programmers guide notes that reads can be re-ordered, even
uncached ones, so we need an explicit SYNC between them.
Yes, this is a case of a driver author actively doing a bus barrier
operation.
This ends up being necessary when the mips74k core is run in write-back
mode rather than write-through mode. That's coming in an upcoming
commit.
Tested:
* mips74k, QCA9558 SoC (AP135 reference board), arge<->arge interface
routing traffic tests.
send frames.
This matches the other check for space.
"enough" is a misnomer, for "reasons". The biggest reason is that
the TX ring is actually a circular linked list, with no head/tail pointers.
This is just a bit more headroom between head/tail so we have time to
schedule frames before we hit where the hardware is at.
Ideally this would be tunable and a little larger.
This flushes out the write to the system before anything continues.
The mips74k guide, chapter 3.3.3 (write gathering) notes that writes
can be buffered in FIFOs - even uncached ones - so we can't guarantee
the device has felt its effects. Now, since we're all lazy driver
authors and don't pepper read/write barriers everywhere, fake it here.
tested:
* mips74k - QCA9558 SoC (AP135 reference board)
It is definitely not needed after r288158, and is a private variable as well
that should not be checked here.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
self-documented, and eases addition of new ops.
For the similar reasons, eliminate UMTX_OP_MAX. nitems() handles the
only use of the symbol.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Only enable h_raw on x86 targets for today so that a buildworld runs to
completion for clang enabled targets that are not x86. This should be
removed when validation of the sanitizer has occured for all targets
supported by FreeBSD and clang.
Fixes race condition observed under following circumstances:
1) I/O split on 128KB boundary with Intel NVMe controller.
Current Intel controllers produce better latency when
I/Os do not span a 128KB boundary - even if the I/O size
itself is less than 128KB.
2) Per-CPU I/O queues are enabled.
3) Child I/Os are submitted on different submission queues.
4) Interrupts for child I/O completions occur almost
simultaneously.
5) ithread for child I/O A increments bio_inbed, then
immediately is preempted (rendezvous IPI, higher priority
interrupt).
6) ithread for child I/O B increments bio_inbed, then completes
parent bio since all children are now completed.
7) parent bio is freed, and immediately reallocated for a VFS
or gpart bio (including setting bio_children to 1 and
clearing bio_driver1).
8) ithread for child I/O A resumes processing. bio_children
for what it thinks is the parent bio is set to 1, so it
thinks it needs to complete the parent bio.
Result is either calling a NULL callback function, or double freeing
the bio to its uma zone.
PR: 203746
Reported by: Drew Gallatin <gallatin@netflix.com>,
Marc Goroff <mgoroff@quorum.net>
Tested by: Drew Gallatin <gallatin@netflix.com>
MFC after: 3 days
Sponsored by: Intel
if they are not required for mounting rootfs. However, it's possible
that some setups try to mount them in mountcritlocal (ie from fstab).
Export the list of current root mount holds using a new sysctl,
vfs.root_mount_hold, and make mountcritlocal retry if "mount -a" fails
and the list is not empty.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3709
status registers for every interrupt. Check a common host channel
status interrupt register first, then conditionally read the
individual host channel status registers.
Submitted by: Sebastian Huber <sebastian.huber@embedded-brains.de>
MFC after: 1 week
The kernel dump does not store these values on the stack.
Use PCB structure to resolve PC and LR properly.
Submitted by: Wojciech Macek <wma@semihalf.com>
Reviewed by: jhb, kib
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4013
To make KGDB working, it needs to understand kernel ELF image.
By default it is compiled using EABI_5, which is not supported
on the gdb-6. As a workaround, treat these images as EABI_2 because
they share a lot of things in common.
This workaround does not guarantee ALL funtionalities
to work.
Submitted by: Wojciech Macek <wma@semihalf.com>
Reviewed by: jhb
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4012
b_asize can be zero if the block is compressed into an empty block
(ZIO_COMPRESS_EMPTY) and the trim code asserts that meaningless
zero-sized trimming is not attempted.
The logic for calling trim_map_free() is extracted into a new function
l2arc_trim() to minimize code duplication.
PR: 203473
Reported by: Willem Jan Withagen <wjw@digiware.nl>
Tested by: Willem Jan Withagen <wjw@digiware.nl>
MFC after: 11 days
