child process that were inherited from its parent. However, this should
not be done in the case of a vfork, since the fork handler ends up removing
the tracepoints from the shared vm space, and userland DTrace probes in the
parent will no longer fire as a result.
Now the child of a vfork may trigger userland DTrace probes enabled in its
parent, so modify the fasttrap probe handler to handle this case and handle
the child process in the same way that it would handle the traced process.
In particular, if once traces function foo() in a process that vforks, and
the child calls foo(), fasttrap will treat this call as having come from the
parent. This is the behaviour of the upstream code.
While here, add #ifdef guards to some code that isn't present upstream.
MFC after: 1 month
in6addr_any and is not in the CLIP table either. This fixes a reported
TOE+IPv6 NULL-dereference panic in do_pass_open_rpl().
While here, stop creating hardware servers for any loopback address.
It's just a waste of server tids.
MFC after: 1 week
advisory lock cannot be obtained, prevent double-close of the vnode in
vn_close() called from the fdrop(), by resetting file' f_ops methods.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Besides not making sense, open(O_EXEC) for fifo creates fifoinfo with
zero readers and writers counts, which causes premature free of pipes.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
callers treat the MSI 'addr' and 'data' fields as opaque and also lets
bhyve implement multiple destination modes: physical, flat and clustered.
Submitted by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
Reviewed by: grehan@
This allows it to be better tracked as well as being able to leverage
UMA for more interesting/useful behaviour at a later date.
Sponsored by: Netflix, Inc.
Some Intel XHCI controlles timeout processing so-called "TRBs" when
the final LINK TRB of a so-called "TD" has the CHAIN-BIT set.
MFC after: 1 week
Tested by: glebius @
the TTY. In such a case, ttydev_close() is called multiple times and
each time, t_revokecnt is incremented and cv_broadcast() is called for
both the t_outwait and t_inwait condition variables.
Let's say revoke(2) comes in first and gets to call tty_drain() from
ttydev_leave(). Let's say that the revoke comes from init(8) as the
result of running "shutdown -r now". Since shutdown prints various
messages to the console before announing that the machine will reboot
immediately, let's also say that the output queue is not empty and
that tty_drain() has something to do. Let's assume this all happens
on a 9600 baud serial console, so it takes a time to drain.
The shutdown command will exit(2) and as such will end up closing
stdout. Let's say this close will come in second, bump t_revokecnt
and call tty_wakeup(). This has tty_wait() return prematurely and
the next thing that will happen is that the thread doing revoke(2)
will flush the TTY. Since the drain wasn't complete, the flush will
effectively drop whatever is left in t_outq.
This change takes into account that tty_drain() will return ERESTART
due to the fact that t_revokecnt was bumped and in that case simply
call tty_drain() again. The thread in question is already performing
the close so it can safely finish draining the TTY before destroying
the TTY structure.
Now all messages from shutdown will be printed on the serial console.
Obtained from: Juniper Networks, Inc.
containing the trap instruction encoding (0x7c810808), and restoring it back
with the frame on return. This caused it to panic on my ppc32 machine, but
somehow my ppc64 machine overlooked it, because I was using such a simple
dtrace probe.
X-MFC-with: r259245
MFC after: 2 weeks
We need to do this because the Linux compat layer uses sx(9) for
mutex, however the lagg code uses rmlocks and calls into the mellanox
driver. This causes deadlock due to sleeping while holding a rmlock.
Submitted by: Shahar Klein (shahark mellanox.com)
MFC After: 3 days.
support all valid SAM-5 LUN IDs. CAM_VERSION is bumped, as the CAM ABI
(though not API) is changed. No behavior is changed relative to r257345
except that LUNs with non-zero high 32 bits will no longer be ignored
during device enumeration for SIMs that have set PIM_EXTLUNS.
Reviewed by: scottl
o Assign sc->an_dev in an_probe() (which isn't really a probe function in
the standard newbus sense) as we may need it for printing errors.
o Use device_printf() rather than if_printf() in an_reset() - this is
called from an_probe() long before the ifp structure is initialised
in an_attach().
o Initialize the ifp structure early in an_attach() as we use if_printf()
in cases where allocation of descriptors etc fails.
MFC after: 3 days
them up as part of firmware initialization (which the driver gets to do
only if it's the master driver).
Read the range of tids available for the ETHOFLD functionality if it's
enabled.
New is_ftid() and is_etid() functions to test whether a tid falls within
the range of filter tids or ETHOFLD tids respectively.
MFC after: 2 weeks
Historically creation of device aliases created symbolic links using only
name of target device as a link target, not considering current directory.
Fix that by adding number of "../" chunks to the terget device name,
required to get out of the current directory to devfs root first.
MFC after: 1 month
receiving Zero Length Packets, ZLPs. See comment in code for more
information.
MFC after: 1 week
Reported by: Kohji Okuno <okuno.kohji@jp.panasonic.com>
When a da or ada device dissappears, outstanding IOs fail with
ENXIO, not EIO. The check for EIO was probably copied from Illumos,
where that is indeed the correct errno.
Without this change, pulling a busy drive from a zpool would usually
turn it into UNAVAIL, even though pulling an idle drive would turn
it into REMOVED. With this change, it is REMOVED every time.
Also, vdev_geom_io_intr shouldn't do zfs_post_remove, because that
results in devd getting two resource.fs.zfs.removed events. The
comment said that the event had to be sent directly instead of
through the async removal thread because "the DE engine is using
this information to discard prevoius I/O errors". However, the fact
that vdev_geom_io_intr was never actually sending the events until
now, and that vdev_geom_orphan never sent them at all, and that
vdev_geom_orphan usually gets called about 2 seconds after the
actual removal, means that FreeBSD's userland can cope with a late
event just fine.
Approved by: ken (mentor)
Sponsored by: Spectra Logic Corporation
MFC after: 4 weeks
In case of 4K allocation quantum that means for allocations up to 128K.
With growth of memory fragmentation these lists may grow to quite a large
sizes (tenths and hundreds of thousands items). Having in one list items
of different sizes in worst case may require full linear list traversal,
that may be very expensive. Having lists for items of single size means
that unless user specify some alignment or border requirements (that are
very rare cases) first item found on the list should satisfy the request.
While running SPEC NFS benchmark on top of ZFS on 24-core machine with
84GB RAM this change reduces CPU time spent in vmem_xalloc() from 8%
and lock congestion spinning around it from 20% to invisible levels.
And that all is by the cost of just 26 more pointers per vmem instance.
If at some point our kernel will start to actively use KVA allocations
with odd sizes above 128K, something may need to be done to bigger lists
also.
all the structures. While here, move a helper struct only used in
the kernel parser out of this header since it is not part of the MP
specification itself.
completely full, we'd not complete any of the mbufs due to the fence
post error (this creates a large leak). When this is fixed, we still
leak, but at a much smaller rate due to a race between ateintr and
atestart_locked as well as an asymmetry where atestart_locked is
called from elsewhere. Ensure that we free in-flight packets that
have completed there as well. Also remove needless check for NULL on
mb, checked earlier in the loop and simplify a redundant if.
MFC after: 3 days
When the guest is bringing up the APs in the x2APIC mode a write to the
ICR register will now trigger a return to userspace with an exitcode of
VM_EXITCODE_SPINUP_AP. This gets SMP guests working again with x2APIC.
Change the vlapic timer lock to be a spinlock because the vlapic can be
accessed from within a critical section (vm run loop) when guest is using
x2apic mode.
Reviewed by: grehan@
sys/cdefs.h. In particular, in case of COMPAT_43, param.h includes
sys/types.h, which includes sys/select.h, which includes
sys/_sigset.h. The _sigset.h customizes the provided definions based
on COMPAT_43, eliminating osigset_t if symbol is not defined. The
sys/proc.h is included after opt_compat.h and needs osigset_t.
Move opt_compat.h inclusion into the right place.
Sponsored by: The FreeBSD Foundation
the excess code in g_io_check(), bio_resid is also truncated by
g_io_deliver(). As result, bufdonebio() assigns truncated value to
the buffer b_resid field.
Use the residual bio_completed to calculate buffer b_resid from
b_bcount in bufdonebio(), instead of bio_resid, calculated from
bio_length in g_io_deliver().
The issue is seemingly caused by the code rearrange into g_io_check(),
which is not present in stable/10. The change still looks as the
useful change to have in 10 nevertheless.
Reported by: Stefan Hegnauer <stefan.hegnauer@gmx.ch>
Tested by: pho, Stefan Hegnauer <stefan.hegnauer@gmx.ch>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
the bio is unmapped, so we must map the bio pages into pbuf. This
works around the geom classes which do not follow the MAXPHYS limit on
the i/o size, since such classes do not know about unmapped bios
either.
Reported by: Paolo Pinto <paolo.pinto@netasq.com>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Intel manual says: "If a transition is already in progress, transition to
a new value will subsequently take effect. Reads of IA32_PERF_CTL determine
the last targeted operating point." So seems it should be fine to just
trigger wanted transition and go. Linux does the same.
MFC after: 1 month
(64MB). Even if we would find one somehow, ZFS kernel code rejects such
devices. It is funny to look on attempts to read 4 256K vdev labels from
1.44MB floppy, though it is not very practical and quite slow.
inclusion of right after sys/param.h.
o Only vt_core module use compat options, move it from common header to module.
Reported by: Larry Rosenman ler at lerctr dot org
Sponsored by: The FreeBSD Foundation
this change we may end up with a panic (Fatal kernel mode data abort:
'External Non-Linefetch Abort (S)') as described in
http://e2e.ti.com/support/arm/sitara_arm/f/791/t/276862.aspx.
It is now possible to bring up I2C1 and I2C2 on BBB.
Approved by: adrian (mentor)
o Include opt_splash.h for vt(9) to know when splash device is enabled.
o Build logo_freebsd.c only if splash and vt are enabled.
o Include opt_compat.h to know when we have to respect compatibility.
Sponsored by: The FreeBSD Foundation
(like NAA assigned) and identify the same entity (like device or port).
Otherwise there can be false positives since at least some models of
Seagate disks use same IDs for the whole device and one of its ports.
MFC after: 2 weeks
The code was unmodified compared to Linux and returned the amount of
received bytes from the i2c bus. This led to non-working i2c bus and
failure to eg. read monitor's EDID, if connected to DisplayPort.
MFC after: 3 days
Tested by: Mikaël Urankar <mikael.urankar@gmail.com>
This fixes radeon_agp_init() and gtt_size is now correct. However, this
is not enough to make Radeon AGP cards work: ttm_agp_backend.c isn't
implemented yet.
Submitted by: tijl@
going on in here than can be fixed, and I introduced some of my own. Rather
than fix the whole host of them, back out my bugs.
Found by: bde
X-MFC with: r259080
This decouples the guest's 'hz' from the host's 'hz' setting. For e.g. it is
now possible to have a guest run at 'hz=1000' while the host is at 'hz=100'.
Discussed with: grehan@
Tested by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
synchronous (with FILE_SYNC) writes because non-contiguous
byte ranges in the same buffer cache block are being
written. This patch adds a new mount option "noncontigwr"
which allows the non-contiguous byte ranges to be combined,
with the dirty byte range becoming the superset of the bytes
that are dirty, if the file has not been file locked.
This reduces the number of writes significantly for software
builds. The only case where this change might break existing
applications is where an application is writing
non-overlapping byte ranges within the same buffer cache block
of a file from multiple clients concurrently.
Since such an application would normally do file locking on
the file, avoiding the byte range merge for files that have
been file locked should be sufficient for most (maybe all?) cases.
Submitted by: jhb (earlier version)
Reviewed by: kib
MFC after: 3 weeks
vcpu and destroy its thread context. Also modify the 'HLT' processing to ignore
pending interrupts in the IRR if interrupts have been disabled by the guest.
The interrupt cannot be injected into the guest in any case so resuming it
is futile.
With this change "halt" from a Linux guest works correctly.
Reviewed by: grehan@
Tested by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
Make the scan state optional - we'll obviously need a vap, but we now
won't require the scan state. the only thing the scan state is needed
for is to check for the list of SSIDs to scan - which we can now
just plain ignore by passing in NULL as the scan state pointer.
Tested:
* Intel 5100 (STA)
This is in preparation for being able to use iwn_scan() to do an off
channel scan to reset the RF tuning.
It should be a no-op.
Tested:
* Intel 5100 (STA)
in preparation for the scan based retune logic.
The linux iwlwifi driver does a rescan (onto a non-active channel)
to force an RF retune when the PLCP error rates exceed a certain threshold.
* Add code to track HT PLCP rate errors;
* Separate out the PLCP error count fetch and update so the delta
can be used when checking for PLCP error rates;
* Implement the PLCP error logic from iwlwifi;
* For now, just print out whenever the error rate exceeds the
threshold.
The actual scan based retune will take a bit more effort; the scan
command code right now assumes that a scan state is passed in.
This does need to change to be more flexible (both for this and
in preparation for scanning multiple channels at once.)
Tested:
* 5100 (STA mode)
* 2200 (STA mode)
* 2230 (STA mode)
working on some RF tuning issues.
The linux iwlwifi driver has these thresholds which they use to see
if there are PLCP errors over a certain interval. If they hit this,
they trigger a single-channel (different from active channels!)
scan to retune the RF front-end.
for signed values due to a compiler authors considering integer
overflow as impossible.
The change follows suit of other projects taking the same measure.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
vm_max_virtual_address to be KERNVIRTADDR + 256MB. This allows some
future shock protection since the KVA requirements have gone up since
the unmapped changes have gone in, as well as preventing us from
overlapping with the hardware devices, which we map at 0xd0000000,
which we'd hit with anything more than 85MB...
MFC after: 3 days
always returning '0' for all the reads, even for the outputs. It is now
known to work with gpioiic(4) and gpioled(4).
Approved by: adrian (mentor)
Tested on: BBB
regions which represent the total amount of memory. The size of these regions
is not the physical size of the chip but it is a logical one and it is given
by the OpenFirmware, it is selectable at boot time and varies between 16MB and
256MB in my case. There is an 'automatic' option which would select the size as
64MB in case you have around 16GB of RAM.
To make sure we can allocate RAM with the automatic option bump this value
of PHYS_AVAIL_SZ to 256.
- Add 'hyperv' module into build;
- Allow building Hyper-V support as part of the kernel;
- Hook Hyper-V build into NOTES.
This is intended for MFC if re@ permits.
MFC after: 3 days
- Add support to 40Gbps devices;
- Add support to control adaptive interrupt coalescing (AIC)
via sysctl;
- Improve support of BE3 devices;
Many thanks to Emulex for their continued support of FreeBSD.
Submitted by: Venkata Duvvuru <VenkatKumar.Duvvuru Emulex Com>
MFC after: 3 days
According to online documentation [1], Ext4 has two new "special"
inodes so add the new exclude and replica inodes.
Reference:
[1] https://ext4.wiki.kernel.org/index.php/Ext4_Disk_Layout
Reported by: Mike Ma
MFC after: 3 weeks
defaults to PANIC_REBOOT_WAIT_TIME (a long-existing kernel config
setting). Use this now-variable value in place of the defined constant
to control how long the system waits after a panic before rebooting.
scheduling classes in the chip and to bind tx queue(s) to a scheduling
class respectively. These can be used for various kinds of tx traffic
throttling (to force selected tx queues to drain at a fixed Kbps rate,
or a % of the port's total bandwidth, or at a fixed pps rate, etc.).
Obtained from: Chelsio
by SCHED_PRI_TICKS should be SCHED_PRI_RANGE - 1 so that the resulting
priority value (before nice adjustment) is between SCHED_PRI_MIN and
SCHED_PRI_MAX, inclusive.
Submitted by: kib
Reported by: pho
MFC after: 1 week
has outgrown its original name. Originally this function simply sent an IPI
to the host cpu that a vcpu was executing on but now it does a lot more than
just that.
Reviewed by: grehan@
This is to support LOCK_LOG_* functionality effectively in debugging
environments but it is overkill because really LOCK_DEBUG should be on
only if (KTR_COMPILE & KTR_LOCK) is true.
Fix this by applying the correct logic.
In this process, move the KTR classes to its own header to reduce
namespace pollution.
Sponsored by: EMC / Isilon storage division
Reviewed by: jhb
for these chipsets.
* Correctly set the active/passive flag in the scan request - this is
NOT a "is the channel active|passive"; it's to do with whether we
have an SSID to actively scan for or not. The firmware takes care
of the active/passive setup of the channel.
* Calculate the active/passive dwell time based on the beacon interval
and the channel mode, rather than using a hard coded value.
* For now, hardcode the scan service_time. It's defined as:
31:22 - number of beacon intervals to come back onto the home channel
for;
0:21 - time (microseconds) to come back onto the home channel for.
When doing an active scan when the NIC is active (whether we're associated
or not - it only matters if we've setup the NIC to a destination or not)
this determines how much time to stay on the home channel for when
scanning. We can tune this based on the amount of active traffic.
For now it's 4 beacon intervals and 100 microseconds.
* Fix the "good crc threshold" setting. It differs based on the NIC
firmware. Some older firmware required a workaround; the later
firmware instead treats the field as a flag.
* Enforce that we are not sending a scan command if one is already
pending. Any time this is done is a bug and it absolutely needs
to be fixed - so be very loud.
* Add the SCAN flag to a few debug messages that are scan related but
only occuring under STATE.
Now, this does get noisy when you're scanning in an actively busy 2GHz
network as the firmware (for reason I don't quite yet understand) seems
hell bent on staying on some passive channels longer than it should.
However, it should eventually recover and complete the scan.
This is a work in progress; please let me know if things get stuck or
if things improve!
Tested:
* intel centrino 2200
* intel centrino 2230
* intel 6200
* intel 5100
* intel 4965 (gets upset, but that's a known issue)
Obtained from: linux iwlwifi
TX ring according to what the firmware requires.
The firmware requires A-MPDU sub-frames to be at a very specific ring
offset - that is, the ring slot offset should be (seqno % 256.)
This holds for every NIC I've tested thus far except the 4965,
which starts erroring out here shortly before the firmware panics.
Which is good, it's doing what it's supposed to (read: capture that
we've screwed up somewhere.)
The specifics about getting this stuff right:
* the initial seqno allocation should match up with the ringid.
* .. yes, this means we can start at a ring offset that isn't zero.
* .. because we program the start seqno in the firmware message
to setup the AC.
* The initial seqno allocation may be non-zero _and_ frames may be
being transmitted during a-mpdu negotiation. I faced similar
issues on ath(4) and had to software queue frames to that node+TID
during A-MPDU negotiation.
* seqno allocation should be in lockstep with ring increments.
* If we fail to transmit some segment, no, we shouldn't reuse that
ring slot. We should just transmit a BAR (which we aren't yet
doing, sigh) and move onto the next seqno.
* In theory there shouldn't be any holes in the seqno space when
we are transmitting frames.
Tested:
* 4965 (throws problems, so yes we have to fix this);
* 5100 (seems ok);
* 6200 (seems ok);
* 2200 (seems ok);
* 2230 (seems ok).
The directory sys/dev/drm2/i915 is apperently contributed code.
Revert to the broken version of this file to make future imports easier.
Requested by: kib
- The remote host sends a FIN
- in an ACK for a sequence number for which an ACK has already
been received
- There is still unacked data on route to the remote host
- The packet does not contain a window update
The packet may be dropped without processing the FIN flag.
PR: kern/99188
Submitted by: Staffan Ulfberg <staffan@ulfberg.se>
Discussed with: andre
MFC after: never
MACHINE_ARCH values whose binaries this kernel can run. This patch provides
a feature requested for implementing pkgng ABI identifiers in a robust
way.
The list is designed to indicate whether, say, an i386 package can be run on
the current system. If kern.supported_abis contains "i386", then the answer
is yes. Otherwise, the answer is no.
At the moment, this only supports MACHINE_ARCH and MACHINE_ARCH32. As we
gain support for more interesting combinations, this needs to become more
flexible, possibily through the sysent framework, along with the
hw.machine_arch emulation immediately preceding this code in kern_mib.c.
Reviewed by: imp
MFC after: 3 days
Open Firmware-centric:
- Keep the static list of regions in platform.c instead of ofw_machdep.c
- Move various merging and sorting operations to platform.c as well
- Move apple_hacks code out of ofw_machdep.c and into platform_powermac.c,
where it belongs
- Move CHRP-specific dynamic-reconfiguration memory parsing into
platform_chrp.c instead of pretending it is shared code
in /chosen, be ihandles. The ePAPR spec makes those cross-reference phandles,
since FDT has no concept of ihandles. Have the OF FDT CI module interpret
queries about ihandles as cross-reference phandles.
We had previously tried to flush all MKDIR_PARENT dependencies (and
all the NEWBLOCK pagedeps) by calling ffs_update(). However this will
only resolve these dependencies in direct blocks. So very large
directories with MKDIR_PARENT dependencies in indirect blocks had
not yet gotten flushed. As the directory is in the midst of doing a
complete sync, we simply defer the checking of the MKDIR_PARENT
dependencies until the indirect blocks have been sync'ed.
Reported by: Shawn Wallbridge of imaginaryforces.com
Tested by: John-Mark Gurney <jmg@funkthat.com>
PR: 183424
MFC after: 2 weeks
for extending and reusing it.
The sendfile_sync wrapper is mostly just a "mbuf transaction" wrapper,
used to indicate that the backing store for a group of mbufs has completed.
It's only being used by sendfile for now and it's only implementing a
sleep/wakeup rendezvous. However, there are other potential signaling
paths (kqueue) and other potential uses (socket zero-copy write) where the
same mechanism would also be useful.
So, with that in mind:
* extract the sendfile_sync code out into sf_sync_*() methods
* teach the sf_sync_alloc method about the current config flag -
it will eventually know about kqueue.
* move the sendfile_sync code out of do_sendfile() - the only thing
it now knows about is the sfs pointer. The guts of the sync
rendezvous (setup, rendezvous/wait, free) is now done in the
syscall wrapper.
* .. and teach the 32-bit compat sendfile call the same.
This should be a no-op. It's primarily preparation work for teaching
the sendfile_sync about kqueue notification.
Tested:
* Peter Holm's sendfile stress / regression scripts
Sponsored by: Netflix, Inc.
shifts into the sign bit. Instead use (1U << 31) which gets the
expected result.
This fix is not ideal as it assumes a 32 bit int, but does fix the issue
for most cases.
A similar change was made in OpenBSD.
Discussed with: -arch, rdivacky
Reviewed by: cperciva
requires process descriptors to work and having PROCDESC in GENERIC
seems not enough, especially that we hope to have more and more consumers
in the base.
MFC after: 3 days
http://svnweb.freebsd.org/changeset/base/258221
I introduced a bug which initialized global locks
whenever the SCTP stack initialized. This was fixed in
http://svnweb.freebsd.org/changeset/base/258574
by rodrigc@. He just initialized the locks for
the default vnet. This fix reverts to the old
behaviour before r258221, which explicitly makes
sure it is only called once, because this works also on
other platforms.
MFC after: 3 days
X-MFC with: r258574.
decides to do nothing.
If this isn't done, then a scan request whilst a scan occurs in an active
channel set or a completed channel set will hang.
Tested:
* Intel 5100, STA mode
The freebsd variant of dmu_write_pages is hidden under _KERNEL
to avoid needlessly pulling in vm_page_t declaration.
Besides, this function seems to be useless for ZFS userland counterpart.
MFC after: 15 days
ZFS never partially validates or invalidates a page.
The higher level VM should not do that either.
mappedread_sf correct operation depends on a page being either fully
valid or invalid.
MFC after: 7 days
from OF. Linux does it similar, means they also read the OF values and
display them.
Tested under qemu and real hardware:
cpu0: IBM POWER5+ revision 2.0, 1898.10 MHz
in one of the many layers of indirection and shims through stable/7
in jail_handle_ips(). When it was cleaned up and unified through
kern_jail() for 8.x, the byte order swap was lost.
This only matters for ancient binaries that call jail(2) themselves
internally.
4101 metaslab_debug should allow for fine-grained control
4102 space_maps should store more information about themselves
4103 space map object blocksize should be increased
4104 ::spa_space no longer works
4105 removing a mirrored log device results in a leaked object
4106 asynchronously load metaslab
illumos/illumos-gate@0713e232b7
Note that some tunables have been removed and some new tunables have
been added. Of particular note, FreeBSD-only knob
vfs.zfs.space_map_last_hope is removed as it was a nop for some time now
(after one of the previous merges from upstream).
MFC after: 11 days
Sponsored by: HybridCluster [merge]
This API has semantics similar to that of taskqueue_drain but acts on
all tasks that might be queued or running on a taskqueue.
A caller must ensure that no new tasks are being enqueued otherwise this
call would be totally meaningless. For example, if the tasks are
enqueued by an interrupt filter then its interrupt must be disabled.
MFC after: 10 days
In illumos all ioctl zio-s are "global" at the moment. That is they act
on a whole disk, e.g. a cache flush command, and thus do not need either
offset or size parameters.
FreeBSD, on the other hand, has support for TRIM command and that
command requires proper offset and size parameters.
Without this fix all TRIM commands act on the start of any disk or
partition used by ZFS destroying any data there.
Pointyhat to: avg
Tested by: sbruno
MFC after: 3 days
X-MFC with: r258632
Sponsored by: HybridCluster
commit level triggered interrupts would work as long as the pin was not shared
among multiple interrupt sources.
The vlapic now keeps track of level triggered interrupts in the trigger mode
register and will forward the EOI for a level triggered interrupt to the
vioapic. The vioapic in turn uses the EOI to sample the level on the pin and
re-inject the vector if the pin is still asserted.
The vhpet is the first consumer of level triggered interrupts and advertises
that it can generate interrupts on pins 20 through 23 of the vioapic.
Discussed with: grehan@
preserve any existing fault buffer. RTAS calls are meant to be safe from
interrupt context (and are indeed used there to implement the xics PIC
drvier). Without this, calling into RTAS in interrupt context would have
the effect of clearing any existing onfault state of the interrupted
thread, potentially leading to a panic.
(> PAGE_SIZE) zones. If zone is not multiple to PAGE_SIZE, there may
be enough space for the header at the last page, so we may avoid extra
header memory allocation and hash table update/lookup.
ZFS creates bunch of odd-sized UMA zones (5120, 6144, 7168, 10240, 14336).
This change gives good use to at least some of otherwise lost memory there.
Reviewed by: avg
most often used with network interfaces.
The SFF-8472 standard defines the information that can be retrieved
from an optic or a copper cable plugged into a NIC, most often
referred to as SFP+. Examples of values that can be read
include the cable vendor's name, part number, date of manufacture
as well as running data such as temperature, voltage and tx
and rx power.
Copious comments on how to use these values with an I2C interface
are given in the header file itself.
MFC after: 2 weeks
There are good reasons for this to happen, such as recursion prevention, etc.
and they are not fatal since buckets are just an optimization mechanism.
Real bucket allocation failures are any way counted by the bucket zones
themselves, and we don't need double accounting there.
was used without making sure first that it was really passed for us.
On some of my systems this bug made user argument passed by ZFS code to
uma_zalloc_arg() unexpectedly block UMA per-CPU caches for those zones.
sys/boot/fdt/dts/bindings-gpio.txt. Make the led pin an output, add the
missing flag field. No functional change (gpioled(4) isn’t supported on
FDT systems yet).
Approved by: adrian (mentor)
given process.
Note that the correctness of the trampoline length returned for ABIs
which do not use shared page depends on the correctness of the struct
sysvec sv_szsigcodebase member, which will be fixed on as-need basis.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
compilation results in inclusion of the header, a confict arises due
to savefpu being union for i386, but used as struct in the pcb
definition. The 32bit code should not need amd64 variant of the
struct pcb anyway.
For struct region_descriptor, use __uint64_t instead of unsigned long,
as the base type for bit-fields. Unsigned long cannot have width 64
for -m32.
The changes allowed to use sys/sysctl.h for cc -m32.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
4080 zpool clear fails to clear pool
4081 need zfs_mg_noalloc_threshold
illumos/illumos-gate@22e30981d8
MFC after: 10 days
Sponsored by: HybridCluster [merge]
illumos/illumos-gate@69962b5647
Please note the following changes:
- zio_ioctl has lost its priority parameter and now TRIM is executed
with 'now' priority
- some knobs are gone and some new knobs are added; not all of them are
exposed as tunables / sysctls yet
MFC after: 10 days
Sponsored by: HybridCluster [merge]
943 zio_interrupt ends up calling taskq_dispatch with TQ_SLEEP
illumos/illumos-gate@5aeb94743e
Essentially FreeBSD taskqueues already operate in a mode that
was added to Illumos with taskq_dispatch_ent change.
We even exposed the superior FreeBSD interface as taskq_dispatch_safe.
Now we just rename taskq_dispatch_safe to taskq_dispatch_ent and
struct struct ostask to taskq_ent_t, so that code differences will be
minimal.
After this change sys/cddl/compat/opensolaris/sys/taskq.h header is no
longer needed.
Note that this commit is not an MFV because the upstream change was not
individually committed to the vendor area.
MFC after: 8 days
The new macros are implemented in terms of SDT_PROBE_DEFINE and SDT_PROBE.
Probes defined in this way will appear under SDT provider named "sdt".
Parameter types are exposed via SDT_PROBE_ARGTYPE.
This is something that illumos does not have by default.
This kind of SDT probes is already present in ZFS code, so those probes
will now be available if KDTRACE_HOOKS options is enabled.
A potential future illumos compatibility enhancement is to encode a provider
name as a prefix in a probe name.
Reviewed by: markj
MFC after: 3 weeks
X-MFC after: r258622
In its stead use the Solaris / illumos approach of emulating '-' (dash)
in probe names with '__' (two consecutive underscores).
Reviewed by: markj
MFC after: 3 weeks
callable from the kernel.
Right now vn_sendfile() can't be called from anything other than
a syscall handler _and_ return the number of bytes queued.
This simply moves the copyout() to do_sendfile() so that any kernel
code can initiate vn_sendfile() outside of a syscall context.
Tested:
* tiny little sendfile program spitting things out a tcp socket
Sponsored by: Netflix, Inc.
This lock gets deleted in sys/netpfil/ipfw/ip_fw2.c:vnet_ipfw_uninit().
Therefore, vnet_ipfw_nat_uninit() *must* be called before vnet_ipfw_uninit(),
but this doesn't always happen, because the VNET_SYSINIT order is the same for both functions.
In sys/net/netpfil/ipfw/ip_fw2.c and sys/net/netpfil/ipfw/ip_fw_nat.c,
IPFW_SI_SUB_FIREWALL == IPFW_NAT_SI_SUB_FIREWALL == SI_SUB_PROTO_IFATTACHDOMAIN
and
IPFW_MODULE_ORDER == IPFW_NAT_MODULE_ORDER
Consequently, if VIMAGE is enabled, and jails are created and destroyed,
the system sometimes crashes, because we are trying to use a deleted lock.
To reproduce the problem:
(1) Take a GENERIC kernel config, and add options for: VIMAGE, WITNESS,
INVARIANTS.
(2) Run this command in a loop:
jail -l -u root -c path=/ name=foo persist vnet && jexec foo ifconfig lo0 127.0.0.1/8 && jail -r foo
(see http://lists.freebsd.org/pipermail/freebsd-current/2010-November/021280.html )
Fix the problem by increasing the value of IPFW_NAT_SI_SUB_FIREWALL,
so that vnet_ipfw_nat_uninit() runs after vnet_ipfw_uninit().
3-clause BSD license as specified by Oracle America, Inc. in 2010.
This license change was approved by Wim Coekaerts, Senior Vice
President, Linux and Virtualization at Oracle Corporation.
bhyve supports a single timer block with 8 timers. The timers are all 32-bit
and capable of being operated in periodic mode. All timers support interrupt
delivery using MSI. Timers 0 and 1 also support legacy interrupt routing.
At the moment the timers are not connected to any ioapic pins but that will
be addressed in a subsequent commit.
This change is based on a patch from Tycho Nightingale (tycho.nightingale@pluribusnetworks.com).
In r208160, sctp_it_ctl was made a global variable, across all VNETs.
However, sctp_init() is called for every VNET that is created. This results
in the same global mutexes which are part of sctp_it_ctl being initialized. This can result
in crashes if many jails are created.
To reproduce the problem:
(1) Take a GENERIC kernel config, and add options for: VIMAGE, WITNESS,
INVARIANTS.
(2) Run this command in a loop:
jail -l -u root -c path=/ name=foo persist vnet && jexec foo ifconfig lo0 127.0.0.1/8 && jail -r foo
(see http://lists.freebsd.org/pipermail/freebsd-current/2010-November/021280.html )
Witness will warn about the same mutex being initialized.
Fix the problem by only initializing these mutexes in the default VNET.
The code was easier to read without __DECONST and clang didn't report
any error. I thought the cast was enough...
MFC after: 3 days
X-MFC-With: r258549
drm_le_cmp() (qsort_r()'s callback) receives pointers to elements in the
array passed to qsort_r(), not the elements themselves.
Before this fix, the use of qsort_r() shuffled the array, not sorted it,
because the compare callback accessed random memory locations, not the
expected elements.
This bug triggered an infinite loop in KDE/xserver:
1. KDE has a kded module called "randrmonitor" which queries xserver
for current monitors at startup and then listens to RandR
notifications from xserver.
2. xserver handles the query from "randrmonitor" by polling the
video device using the "drm_mode_getconnector()" ioctl. This
ioctl returns a list of connectors and, for those with a
connected monitor, the available modes. Each modes list is sorted
by the kernel before returning. When xserver gets the connectors
list, it sorts the modes lists again.
In the case of this bug, when two modes are equal (in xserver's
compare function PoV), their order is kept stable (ie. the
kernel order is kept for those two modes). And because the list
was shuffled by the kernel, the order of two equal modes was
frequently changed in the final modes list in xserver.
3. xserver compares the returned connectors list with the list
obtained earlier. In particular, it compares the sorted
modes lists for each connector. If a property of a connector
changes (eg. modes), xserver sends a "RRNotify_OutputChange"
notification.
Because of the change of order between equal modes, xserver sent
a notification after each polling of the connectors.
4. "randrmonitor" receives a notification, triggered by its query. The
notification doesn't contain the new connectors list, therefore, it
asks for the new list using the same function: go back to step #2.
MFC after: 3 days
option, unbreak the lock tracing release semantic by embedding
calls to LOCKSTAT_PROFILE_RELEASE_LOCK() direclty in the inlined
version of the releasing functions for mutex, rwlock and sxlock.
Failing to do so skips the lockstat_probe_func invokation for
unlocking.
- As part of the LOCKSTAT support is inlined in mutex operation, for
kernel compiled without lock debugging options, potentially every
consumer must be compiled including opt_kdtrace.h.
Fix this by moving KDTRACE_HOOKS into opt_global.h and remove the
dependency by opt_kdtrace.h for all files, as now only KDTRACE_FRAMES
is linked there and it is only used as a compile-time stub [0].
[0] immediately shows some new bug as DTRACE-derived support for debug
in sfxge is broken and it was never really tested. As it was not
including correctly opt_kdtrace.h before it was never enabled so it
was kept broken for a while. Fix this by using a protection stub,
leaving sfxge driver authors the responsibility for fixing it
appropriately [1].
Sponsored by: EMC / Isilon storage division
Discussed with: rstone
[0] Reported by: rstone
[1] Discussed with: philip
It turned out that on pSeries machines the call into OF modified the trap
vectors and this made further behaviour unpredictable.
With this commit I'm now able to boot multi user on a network booted
environment on my IntelliStation 285. This is a POWER5+ machine.
Discussed with: nwhitehorn
MFC after: 1 week
to inject edge triggered legacy interrupts into the guest.
Start using the new API in device models that use edge triggered interrupts:
viz. the 8254 timer and the LPC/uart device emulation.
Submitted by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
where "m" is number of source nodes and "n" is number of states. Thus,
on heavy loaded router its processing consumed a lot of CPU time.
Reimplement it with O(m+n) complexity. We first scan through source
nodes and disconnect matching ones, putting them on the freelist and
marking with a cookie value in their expire field. Then we scan through
the states, detecting references to source nodes with a cookie, and
disconnect them as well. Then the freelist is passed to pf_free_src_nodes().
In collaboration with: Kajetan Staszkiewicz <kajetan.staszkiewicz innogames.de>
PR: kern/176763
Sponsored by: InnoGames GmbH
Sponsored by: Nginx, Inc.
- Removed pf_remove_src_node().
- Introduce pf_unlink_src_node() and pf_unlink_src_node_locked().
These function do not proceed with freeing of a node, just disconnect
it from storage.
- New function pf_free_src_nodes() works on a list of previously
disconnected nodes and frees them.
- Utilize new API in pf_purge_expired_src_nodes().
In collaboration with: Kajetan Staszkiewicz <kajetan.staszkiewicz innogames.de>
Sponsored by: InnoGames GmbH
Sponsored by: Nginx, Inc.
This is a port from amd64 of r258436, and is intended to make diffs
(against amd64 and for future UEFI work) easier to review.
Reviewed by: jhb@
Sponsored by: The FreeBSD Foundation
so they can be used in the userspace version of ipfw/dummynet
(normally using netmap for the I/O path).
This is the first of a few commits to ease compiling the
ipfw kernel code in userspace.
