implementations or no implementation on all platforms.
Some of these functions might be good ideas, but their semantics were unclear
given the lack of implementation, and an unlucky porter could be fooled into
trying to implement them or, worse, being baffled when something like
platform_trap_enter() failed to be called.
- Pass interrupt trapframe for handlers dow the chain
- Add PMC interrupt handler
PMC interrupt is a special case, so we want handle it as soon as possible
with minimum overhead. So we handle it apb filter routine.
bootable image.
The kernel has to fit inside an 896KiB area in a 4MB SPI flash.
So a bunch of stuff can't be included (and more is to come), including
(unfortunately) IPv6.
TODO:
* GPIO modules need to be created
* Shrink the image a bit more by removing some of the CAM layer debugging
strings.
make use of it where possible.
This primarily brings in support for newer hardware, and FreeBSD is not yet
able to support the abundance of IRQs on new hardware and many features in the
Ethernet driver.
Because of the changes to IRQs in the Simple Executive, we have to maintain our
own list of Octeon IRQs now, which probably can be pared-down and be specific
to the CIU interrupt unit soon, and when other interrupt mechanisms are added
they can maintain their own definitions.
Remove unmasking of interrupts from within the UART device now that the
function used is no longer present in the Simple Executive. The unmasking
seems to have been gratuitous as this is more properly handled by the buses
above the UART device, and seems to work on that basis.
o) The MAC set must occur before the multicast list is set up as the former
will enable the CAM unconditionally, while promiscuous mode disables it,
so if promiscuous mode is to be set this must occur after the MAC is
programmed.
o) The multicast list must be set up unconditionally as even if flags have
not changed, if the interface has gone through a reinitialization, the
state of the CAM as changed by the MAC initialization could be incorrect.
o) Call octm_init when flags change, even if the interface is already running.
XXX It would be good to use a better way to size intrcnt.
o) Fix literal 4s that are supposed to be sizeof (u_long).
XXX Why the * 2 here? Is this an artifact of a different system that this
code came from? We seem to allocate twice as much space for intrcnt
as we admit to in sintrcnt.
platforms.
This will make every attempt to mount a non-mpsafe filesystem to the
kernel forbidden, unless it is expressely compiled with
VFS_ALLOW_NONMPSAFE option.
This patch is part of the effort of killing non-MPSAFE filesystems
from the tree.
No MFC is expected for this patch.
o) Get rid of some unused macros related to features we don't intend to
provide.
o) Get rid of macro definitions for MIPS-I CPUs. We are not likely to
support anything that predartes MIPS-III.
o) Respell MIPS3_* macros as MIPS_*, which is how most of them were being
used already.
o) Eliminate a duplicate and mostly-unused set of exception vector macros.
There's still considerable duplication and lots more obsolete in our headers,
but this reduces one of the larger files to a size where one could reckon
about the correctness of its contents with a mere few hours of contemplation.
There is, of course, a question of whether we need definitions for fields,
registers and configurations that we are unlikely to ever use or implement,
even if they're not obsolete since 1991. FreeBSD is not a processor
reference manual, and things that aren't used may be wrong, or may be
duplicated because nobody could possibly actually know whether they're
already defined.
the native sigreturn doesn't use set_mcontext like the COMPAT_FREEBSD32 version
does, this wouldn't actually result in overwriting the TLS base. Probably it
makes sense to restructure the native sigreturn to use set_mcontext for
consistency, and to allow sigreturn to change the TLS base.
TLS:
o) The mc_tls field used to store the TLS base when doing context gets and
restores was left a pointer and not converted to a 32-bit integer. This
had the bug of not correctly capturing the TLS value desired by the user,
and the extra nastiness of making the structure the wrong size.
o) The mc_tls field was not being saved by sendsig. As a result, the TLS base
would always be set to NULL when restoring from a signal handler.
Thanks to gonzo for helping track down a bunch of other TLS bugs that came out
of tracking these down.
and offset it only if requested by RDHWR handler. Otherwise things
get overly complicated - we need to track whether address passsed in
request for setting td_md.md_tls is already offseted or not.
version was missing an else and would always use the n64 TP_OFFSET. Eliminate
some duplication of logic here.
It may be worth getting rid of some of the ifdefs and introducing gratuitous
SV_ILP32 runtime checks on n64 kernels without COMPAT_FREEBSD32 and on o32
kernels, similarly to how PowerPC works.
using the o32 ABI. This mostly follows nwhitehorn's lead in implementing
COMPAT_FREEBSD32 on powerpc64.
o) Add a new type to the freebsd32 compat layer, time32_t, which is time_t in the
32-bit ABI being used. Since the MIPS port is relatively-new, even the 32-bit
ABIs use a 64-bit time_t.
o) Because time{spec,val}32 has the same size and layout as time{spec,val} on MIPS
with 32-bit compatibility, then, disable some code which assumes otherwise
wrongly when built for MIPS. A more general macro to check in this case would
seem like a good idea eventually. If someone adds support for using n32
userland with n64 kernels on MIPS, then they will have to add a variety of
flags related to each piece of the ABI that can vary. That's probably the
right time to generalize further.
o) Add MIPS to the list of architectures which use PAD64_REQUIRED in the
freebsd32 compat code. Probably this should be generalized at some point.
Reviewed by: gonzo
handle address, where we're using handles as raw addresses.
This fixes devices with subregions on Octeon PCI specifically, and likely also on
MIPS more generally, where there isn't another bus_space in use that was doing the
math already.
long for specifying a boundary constraint.
- Change bus_dma tags to use bus_addr_t instead of bus_size_t for boundary
constraints.
These allow boundary constraints to be fully expressed for cases where
sizeof(bus_addr_t) != sizeof(bus_size_t). Specifically, it allows a
driver to properly specify a 4GB boundary in a PAE kernel.
Note that this cannot be safely MFC'd without a lot of compat shims due
to KBI changes, so I do not intend to merge it.
Reviewed by: scottl
- Reserver respective number of addresses for managment port
- octm uses base address directly
- other drivers get MACs on "first come first served" basis
Reviewed by: juli
- Centralize address assignment
- Make sure managment ports get first MAC address in pool
- Properly propagate fail if address allocation failed
Submitted by: Andrew Duane <aduane@juniper.net>
set all three of the kernel, supervisor, and user-mode 64-bit mode
flags. While FreeBSD does not currently use the supervisor ring (and
hence this is effectively a NOP on most systems), doing this avoids
triggering an exception on 64-bit MIPS CPUs that don't support 32-bit
compatibility mode, and therefore don't allow clearing the SX bit.
Reviewed by: gonzo
MFC after: 3 days
Sponsored by: DARPA, SRI International
Reading register $29 with RDHWR is becoming the de-facto standard to
implement TLS. According to linux-mips wiki, MIPS Technologies has
reserved hardware register $29 for ABI use. Furthermore current GCC
makes the following assumptions:
- RDHWR is natively available or otherwise emulated by the kernel
- Register $29 holds the TLS pointer
Submitted by: Robert Millan <rmh@debian.org>
of root HUB. Although it is initialized with port index of the
device's parent hub, which is worng. So track the USB tree up to
root HUB and initialize this filed ptroprly
Rename port_index to root_port_index in order to reflect its
real semantics.
