MIPS64 has 64-bit longs, so use uint64_t for it, otherwise uint32_t.
sizeof(long) == sizeof(ptr) for all platforms, so define
atomic_swap_ptr in terms of atomic_swap_long.
Submitted by: hps@
icu is a interrupt concentrator in the CP110 block and gicp
is a gic extension to allow interrupts in the CP block to be turned
into GIC SPI interrupts
Sponsored by: Rubicon Communications, LLC ("Netgate")
The cp110 clock controller controls the clocks and gate of the CP110
hardware block.
Every clock/gate are implemented except the NAND clock.
Sponsored by: Rubicon Communications, LLC ("Netgate")
The first two clocks are for the clusters and their frequencies can be
found reading a register. Then a fixed 1200Mhz clock is present and two
fixed clocks, 'mss' which is 1200 / 6 and 'sdio' which is 1200 / 3.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Since OpenSSL 1.1.1, the good old BSD-specific cryptodev engine has been
deprecated in favor of this new engine. However, this engine is not
throughly tested on FreeBSD because it was originally written for Linux.
http://cryptodev-linux.org/
Also, the author actually meant to enable it by default on BSD platforms but
he failed to do so because there was a bug in the Configure script.
https://github.com/openssl/openssl/pull/7882
Now they found that it was more generic issue.
https://github.com/openssl/openssl/pull/7885
Therefore, we need to enable this engine on head to give it more exposure.
The pwm subsystem consist of API for PWM controllers, pwmbus to register them
and a pwm(8) utility to talk to them from userland.
Reviewed by: oshgobo (capsicum), bcr (manpage), 0mp (manpage)
Differential Revision: https://reviews.freebsd.org/D17938
It's been reported that pf doesn't handle running out of available ports
for NAT correctly. It freezes until a state expires and it can find a
free port.
Test for this, by setting up a situation where only two ports are
available for NAT and then attempting to create three connections.
If successful the third connection will fail immediately. In an
incorrect case the connection attempt will freeze, also freezing all
interaction with pf through pfctl and trigger timeout.
PR: 233867
MFC after: 2 weeks
When we try to find a source port in pf_get_sport() it's possible that
all available source ports will be in use. In that case we call
pf_map_addr() to try to find a new source IP to try from. If there are
no more available source IPs pf_map_addr() will return 1 and we stop
trying.
However, if sticky-address is set we'll always return the same IP
address, even if we've already tried that one.
We need to check the supplied address, because if that's the one we'd
set it means pf_get_sport() has already tried it, and we should error
out rather than keep trying.
PR: 233867
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18483
I mistakenly added a lock assertion to this routine at the last minute
without confirming it was held during g_mirror_create. It isn't (it isn't
even initialized yet). Mea culpa. Access is exclusive in both callers,
just not always by that particular lock.
Reported by: lwhsu
X-MFC-With: r341840, r341674
Add a man page for ptnet(4), describing the guest driver for netmap passthrough.
Reviewed by: bcr
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D18518
If bus_dmamap_load_mbuf() fails following a defrag, the caller of
bwn_dma_tx_start() would free the original mbuf after m_defrag() had
already done so. Fix this by returning the defragged mbuf to the
caller instead. Update bwn_pio_tx_start() similarly for consistency.
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Reviewed by: landonf
Tested by: landonf
MFC after: 3 days
admbug: 820
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18342
PR: 217505
Submitted by: John O. Brickley <obryan.brickley@gmail.com>, updated by Maciej Pasternacki <maciej@pasternacki.net>
Reported by: John O. Brickley <obryan.brickley@gmail.com>
MFC after: 1 week
r341674 inadvertently introduced a bug where newer mirror components being
tasted would clear the high sc_flags that are not controlled by component
metadata, such as G_MIRROR_DEVICE_FLAG_TASTING. This could plausibly expose
a small window of time during STARTING where device destruction might race
with mirror component addition, probably resulting in a crash.
Reviewed by: markj
X-MFC-With: r341674
Differential Revision: https://reviews.freebsd.org/D18521
This fixes the obscure endless loop seen with case-insensitive
patterns containing characters in 128-255 range; originally
found running GNU grep test suite.
Our regex implementation being kludgy translates the characters
in case-insensitive pattern to bracket expression containing both
cases for the character and doesn't correctly handle the case when
original character is in bitmap and the other case is not, falling
into the endless loop going through in p_bracket(), ordinary(),
and bothcases().
Reducing the bitmap to 0-127 range for multibyte locales solves this
as none of these characters have other case mapping outside of bitmap.
We are also safe in the case when the original character outside of
bitmap has other case mapping in the bitmap (there are several of those
in our current ctype maps having unidirectional mapping into bitmap).
Reviewed by: bapt, kevans, pfg
Differential revision: https://reviews.freebsd.org/D18302
Also use caph_cache_catpages() to ensure that strerror() works when
run with kern.trap_enotcap=1.
Reviewed by: oshogbo
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18514
check hash to the filesystem inodes. Access attempts to files
associated with an inode with an invalid check hash will fail with
EINVAL (Invalid argument). Access is reestablished after an fsck
is run to find and validate the inodes with invalid check-hashes.
This check avoids a class of filesystem panics related to corrupted
inodes. The hash is done using crc32c.
Note this check-hash is for the inode itself and not any of its
indirect blocks. Check-hash validation may be extended to also
cover indirect block pointers, but that will be a separate (and
more costly) feature.
Check hashes are added only to UFS2 and not to UFS1 as UFS1 is
primarily used in embedded systems with small memories and low-powered
processors which need as light-weight a filesystem as possible.
Reviewed by: kib
Tested by: Peter Holm
Sponsored by: Netflix
Use ATF_TC_CLEANUP(), because that means the cleanup code will get
called even if a test fails. Before it would only be executed if every
test within the body succeeded.
Reported by: Marie Helene Kvello-Aune <marieheleneka@gmail.com>
MFC after: 2 weeks
Explicitly mark these tests as requiring root rights. We need to be able
to open /dev/pf.
Reported by: Marie Helene Kvello-Aune <marieheleneka@gmail.com>
MFC after: 2 weeks
Mainly states of established TCP connections would be affected resulting
in immediate state removal once the number of states is bigger than
adaptive.start. Disabling adaptive timeouts is a workaround to avoid this bug.
Issue found and initial diff by Mathieu Blanc (mathieu.blanc at cea dot fr)
Reported by: Andreas Longwitz <longwitz AT incore.de>
Obtained from: OpenBSD
MFC after: 2 weeks
There was a large refactoring done in CTL to allow multiple ioctl frontend
ports (and respective devices) to be created, particularly for bhyve.
Unfortunately, respective part of bhyve functionality got lost somehow from
the original virtio-scsi commit. This change allows wanted device path to
be specified in either of two ways:
-s 6,virtio-scsi,/dev/cam/ctl1.1
-s 6,virtio-scsi,dev=/dev/cam/ctl2.3
If neither is specified, the default /dev/cam/ctl device is used.
While there, remove per-queue CTL device opening, which makes no sense at
this point.
Reported by: wg
Reviewed by: araujo
MFC after: 3 days
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D18504
r336560 was supposed to restore pre-r323954 behaviour when tx_abdicate is
not set (the default case). However, it appears that rather than the drainage
check being made conditional on tx_abdicate being set, it was duplicated
so it occured twice if tx_abdicate was set and once if it was not.
Now when !tx_abdicate, drainage is only checked if the doorbell isn't
pending.
Reported by: lev
MFC after: 1 week
Sponsored by: Limelight Networks
The error was caused by map_ucode() casting a vm_paddr_t to a void *.
Use a uintptr_t instead to match the caller. Fix some style bugs while
here.
Reported by: bde
Reviewed by: bde
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
