the root filesystem read-write. This causes problems booting
the memstick installation medium from write-protected USB flash
drives.
Submitted by: A.J. Kehoe IV [1], Oliver Jones [2]
PR: 187161 [1], 205886 [2]
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The fd is closed later in this case. This fixes a "SS_NOFDREF on enter"
panic.
Submitted by: Krishnamraju Eraparaju @ Chelsio
Reviewed by: Steve Wise @ Open Grid Computing
- Separate 'firmware_put(sc->fw_fp, FIRMWARE_UNLOAD); sc->fw_fp = NULL;'
into iwn_unload_firmware().
- Move error handling to the end of iwn_read_firmware().
No functional changes.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4768
iwn(4) / wpi(4) works in the same way
(read_firmware() -> hw_init() -> firmware_put())
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4766
rtwnfw got added in r293009 and depends on source-less and
non-free microcode in sys/contrib/dev/rtwn.
PR: 205874
Submitted by: Fabian Keil
Obtained from: ElectroBSD
entries data in unified format.
There are control plane functions that require information other than
just next-hop data (e.g. individual rtentry fields like flags or
prefix/mask). Given that the goal is to avoid rte reference/refcounting,
re-use rt_addrinfo structure to store most rte fields. If caller wants
to retrieve key/mask or gateway (which are sockaddrs and are allocated
separately), it needs to provide sufficient-sized sockaddrs structures
w/ ther pointers saved in passed rt_addrinfo.
Convert:
* lltable new records checks (in_lltable_rtcheck(),
nd6_is_new_addr_neighbor().
* rtsock pre-add/change route check.
* IPv6 NS ND-proxy check (RADIX_MPATH code was eliminated because
1) we don't support RTF_ANNOUNCE ND-proxy for networks and there should
not be multiple host routes for such hosts 2) if we have multiple
routes we should inspect them (which is not done). 3) the entire idea
of abusing KRT as storage for ND proxy seems odd. Userland programs
should be used for that purpose).
Just remove it completely from the test as it's initialized but unused apart
from the free(3) call
Differential Revision: https://reviews.freebsd.org/D4769 (part of larger diff)
MFC after: 5 days
Reported by: cppcheck
Reviewed by: oshogbo
Sponsored by: EMC / Isilon Storage Division
the nvlists
Convert some of the variables from int to unsigned int to squelch -Wsign-compare
warnings when converting hardcoded values to nitems(..)
Differential Revision: https://reviews.freebsd.org/D4769 (part of larger diff)
MFC after: 5 days
Reviewed by: oshogbo
Sponsored by: EMC / Isilon Storage Division
Rename the `nitems` variable to `num_items` to avoid collisions with the
macro in sys/param.h for counting elements in an array
Similarly, rename `string` to `string_arr` to avoid future collisions with
potential keywords, as well as make it clear that `string_arr` isn't a char*
value, but instead a char** value.
Differential Revision: https://reviews.freebsd.org/D4769 (part of larger diff)
MFC after: 5 days
Reviewed by: oshogbo
Sponsored by: EMC / Isilon Storage Division
On powerpc64, pointers are 64 bits, so casting from uint32_t changes the integer
width.
The alternative was to use register_t, but I didn't see register_t used as
argument type for any other functions, though didn't look too closely. u_long
was an acceptable alternative. On 64-bit it's 64 bits, on 32-bit it's 32 bits.
powerpc_init() initializes the mmu. Since this may clear pages via
pmap_zero_page(), set the cacheline size before calling into it, so
pmap_zero_page() has the right cacheline size. This isn't completely
necessary now, but will be when 64-bit book-e is completed.
- Simplify defragmentation code.
- Use proper number of dma segments for data.
Approved by: adrian (mentor)
Obtained from: DragonFlyBSD (mostly)
Differential Revision: https://reviews.freebsd.org/D4754
up and can cause issues on boot with the prompts. Fix the read-only
root case with horrible kludge of mounting rw removing the files, then
mounting ro. But since that's no more horrible than the kludge of
using marker files in /. With this change, NanoBSD configs can safely
use /firstboot + growfs to produce minimal images that grow to the
size of the card.
stable/10 doesn't have the if_getdrvflags(9) KPI. Reference the field in the
structure directly if the __FreeBSD_version is < 1100022, so the driver can
be built with PCI_IOV support on stable/10, without backporting all of
r266974 (which requires additional changes due to projects/ifnet, etc)
Differential Revision: https://reviews.freebsd.org/D4759
Reviewed by: erj, sbruno
Sponsored by: EMC / Isilon Storage Division
These are going to be much more efficient on low end embedded systems
but unfortunately they make it .. less convenient to implement correct
bus barriers and debugging. They also didn't implement the register
serialisation workaround required for Owl (AR5416.)
So, just remove them for now. Later on I'll just inline the routines
from ah_osdep.c.
in6_selectif().
The main task of in6_selectsrc() is to return IPv6 SAS (along with
output interface used for scope checks). No data-path code uses
route argument for caching. The only users are icmp6 (reflect code),
ND6 ns/na generation code. All this fucntions are control-plane, so
there is no reason to try to 'optimize' something by passing cached
route into to ip6_output(). Given that, simplify code by eliminating
in6_selectsrc() 'struct route_in6' argument. Since in6_selectif() is
used only by in6_selectsrc(), eliminate its 'struct route_in6' argument,
too. While here, reshape rte-related code inside in6_selectif() to
free lookup result immediately after saving all the needed fields.
- Change order of data in if_iwmvar.h
(like it is in other drivers: defines, data structures,
vap/node structures, softc struct and locks); use indentation.
- Fix IWM_LOCK(_sc) / IWM_UNLOCK(_sc) macro.
- Add IWM_LOCK_INIT / DESTROY(sc) + fix mtx_init() usage.
- Wrap iwm_node casts into IWM_NODE() macro.
- Drop some fields:
* wt_hwqueue from Tx radiotap header;
* macaddr[6] from iwm_vap;
Approved by: adrian
Differential Revision: https://reviews.freebsd.org/D4753
Add ro_mtu field to 'struct route' to be able to pass lookup MTU back to
the caller.
Currently, ip6_getpmtu() has 2 totally different use cases:
1) control plane (IPV6_PATHMTU req), where we just need to calculate MTU
and return it, w/o any reusability.
2) Actual ip6_output() data path where we (nearly) always use the provided
route lookup data. If this data is not 'valid' we need to perform another
lookup and save the result (which cannot be re-used by ip6_output()).
Given that, handle 1) by calling separate function doing rte lookup itself.
Resulting MTU is calculated by (newly-added) ip6_calcmtu() used by both
ip6_getpmtu_ctl() and ip6_getpmtu().
For 2) instead of storing ref'ed rte, store mtu (the only needed data
from the lookup result) inside newly-added ro_mtu field.
'struct route' was shrinked by 8(or 4 bytes) in r292978. Grow it again
by 4 bytes. New ro_mtu field will be used in other places like
ip/tcp_output (EMSGSIZE handling from output routines).
Reviewed by: ae
It seems that `options GZIP` and `options ZFS` collide because they both
define inconsistent definitions for inflate, etc
Fixing this will require upgrading zlib in the kernel, as suggested in
r245102.
Pointyhat to: ngie
Reported by: bz
Sponsored by: EMC / Isilon Storage Division
- Implement a gmirror_test_cleanup function, which in turn calls
geom_test_cleanup to clean up all md(4) providers allocated in the test
run.
- Remove duplicate logic in test scripts for removing md(4) providers.
- Don't create files in /tmp (outside the kyua sandbox); use the current
directory instead
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
KERNCONF when "make tinderbox" is run
This will help ensure that "options ZFS" will not be accidentally
regressed, as the current LINT configuration tests the zfs module
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
for the environment variables we look up at runtime. Otherwise,
there's no way they will change, optimize it at compile time.
Differential Review: https://reviews.freebsd.org/D2718
for libraries that follow the soft float ABI. It's only supported on
armv6 as a transition to the new hard float ABI, so mark as broken
everywhere else.
problem that led to this temporary workaround (and also so I can properly
cite the PR in the commit this time).
In general this is intended to be a temporary workaround until we can figure
out why including any ram from the last megabyte of the physical address
space leads to a NULL pointer deref. Debugging that is made trickier by the
fact that I couldn't even get a backtrace in ddb.
PR: 201614
