Some PowerQUICC and QorIQ platforms have a L2 cache managed via the
memory-mapped configuration registers, and appear as a node in the device
tree. This adds basic support to enable the cache.
allocated with a tag to come from the specified domain if it meets the
other constraints provided by the tag. Automatically create a tag at
the root of each bus specifying the domain local to that bus if
available.
Reviewed by: jhb, kib
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13545
domains can be done by the _domain() API variants. UMA also supports a
first-touch policy via the NUMA zone flag.
The slab layer is now segregated by VM domains and is precise. It handles
iteration for round-robin directly. The per-cpu cache layer remains
a mix of domains according to where memory is allocated and freed. Well
behaved clients can achieve perfect locality with no performance penalty.
The direct domain allocation functions have to visit the slab layer and
so require per-zone locks which come at some expense.
Reviewed by: Attilio (a slightly older version)
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
reservations by giving each memory domain its own KVA space in vmem that
is naturally aligned on superpage boundaries.
Reviewed by: alc, markj, kib (some objections)
Sponsored by: Netflix, Dell/EMC Isilon
Tested by; pho
Differential Revision: https://reviews.freebsd.org/D13289
Make the calloc wrappers behave as expected by using mallocarray.
It is rather weird that the malloc wrappers also zeroes the memory: update
a comment to reflect at least two cases where it is expected.
Reviewed by: tuexen
Implement 'domainset', a cpuset based NUMA policy mechanism. This allows
userspace to control NUMA policy administratively and programmatically.
Implement domainset based iterators in the page layer.
Remove the now legacy numa_* syscalls.
Cleanup some header polution created by having seq.h in proc.h.
Reviewed by: markj, kib
Discussed with: alc
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13403
userspace to control NUMA policy administratively and programmatically.
Implement domainset based iterators in the page layer.
Remove the now legacy numa_* syscalls.
Cleanup some header polution created by having seq.h in proc.h.
Reviewed by: markj, kib
Discussed with: alc
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13403
Although these should have been 'emac', upstream DTS is going with using
'gmac' as the function name for the emac RGMII pins. Rename here to
accommodate.
emac support for the a83t should come in with the 4.16 DTS update, in
another couple of months.
These return the jail ID and jail name for the traced process,
respectively, and are analogous to "zonename" on Solaris/illumos.
"zonename" is now aliased to "jailname".
Also add some stress tests for the new variables.
Submitted by: Domagoj Stolfa <domagoj.stolfa@gmail.com>
Reviewed by: dteske (previous version)
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D13877
We need to handle two cases:
1. One process attacking another process.
2. A process attacking the kernel.
For the first case we clear the branch predictor state on context switch
between different processes. For the second we do this when taking an
instruction abort on a non-userspace address.
To clear the branch predictor state a per-CPU function pointer has been
added. This is set by the new cpu errata code based on if the CPU is
known to be affected.
On Cortex-A57, A72, A73, and A75 we call into the PSCI firmware as newer
versions of this will clear the branch predictor state for us.
It has been reported the ThunderX is unaffected, however the ThunderX2 is
vulnerable. The Qualcomm Falkor core is also affected. As FreeBSD doesn't
yet run on the ThunderX2 or Falkor no workaround is included for these CPUs.
MFC after: 3 days
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D13812
Skip vfs_refcount_release_if_not_last if the interlock is held and just
go straight to refcount_release.
While here do cosmetic rearrangement of _vhold to better show it contains
equivalent behaviour.
Provide initial support for PCIe host controller as
well as for IOMMU mapping. This commit allows proper
bus enumeration, but does not guarantee DMA operations
are working.
Created by: Nathan Whitehorn <nwhitehorn@freebsd.org>
Submitted by: Wojciech Macek <wma@semihalf.com>
Sponsored by: FreeBSD Foundation
Always initialize some variables GCC warns about. They are initialized in
every path where they are used, but GCC doesn't know that.
Sponsored by: Dell EMC Isilon
Since r326501 which added COMPAT_FREEBSD32 to the GENERIC config for arm64,
we need to build systrace_freebsd32, since dtraceall depends on it.
Reviewed by: ed, gnn
Differential Revision: https://reviews.freebsd.org/D13670
pru_peeraddr().
This is already true when called via kern_getsockname() and
kern_getpeername(). This patch sets it also, when they arecalled
via soo_fill_kinfo(). This is necessary, since the corresponding
functions for SCTP require the vnet to be set. Without this,
if a process having an wildcard bound SCTP socket is
terminated and a core is written, the kernel panics.
Reviewed by: bz
Differential Revision: https://reviews.freebsd.org/D13652
The value written to E1000_TARC(0) wasn't intended to have every bit but
E1000_TARC0_CB_MULTIQ_3_REQ cleared; a ~ was missing.
Also change the referenced spec update section in the comment to the correct
section.
Sponsored by: Intel Corporation
An lld-linked i386 kernel hangs on boot, after em(4) starts. This seems
similar to the issue that prompted us to disable VIMAGE on arm64 in
r326179. Disable VIMAGE on i386 for now while we investigate.
PR: 225077
Sponsored by: The FreeBSD Foundation
Opaque pointers should be void *. Note that this does not go through
the tree removing all of the now-unnecessary casts.
Reviewed by: kib
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D13848
Just copyin the IV into the crypto descriptor directly. This avoids
copying the IV twice for each operation.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D13847
For each we need to walk the MADT to find which we have, then add the
driver as needed. As each may have a child they will each walk the same
table to find these details.
Reviewed by: mmel
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8720
This adds a new acpi_bus interface with a map_intr method. This is similar
to the Open Firmware map_intr method and allows us to create the needed
mapping from ACPI space to INTRNG space.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8617
Highlights of the new bindings:
- ahb clock is specified as 'stmmaceth'
- The PHY to be used is now specified as phy-handle
- We must now check the parent of the node phy-handle points to in order to
discover if we're using internal PHY.
- The ephy clk/reset will be specified on the PHY node, not the emac node.
Care has been taken to ensure that we remain compatible with the older
bindings that we were previously using.
Tested on: Pine64 (A64, old bindings)
Tested on: Pine64-LTS (A64, new bindings) [manu]
Tested on: OrangePi-One (H3, internal PHY) [manu]
Tested on: NanoPi M1 Plus (H3, external PHY) [manu]
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D13777
We already clear %RFLAGS.DF on the kernel entry due to the compiler's
ABI requirements.
Suggested by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Hardware already did it for us due to the mask loaded into the
MSR_SF_MASK msr register.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13838
The symbol is just an offset in the hardware TSS structure, it is not
limited to the common_tss instance.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Avoid the lock in vtophys() by providing a static direct-mapped
spinlock- protected output buffer to use when the console driver
cannot acquire locks for some reason. This allows the idle thread
to use printf() (e.g. the SMP startup messages) without crashing
the kernel.
Created by: Nathan Whitehorn <nwhitehorn@freebsd.org>
Submitted by: Wojciech Macek <wma@freebsd.org>
Sponsored by: FreeBSD Foundation
Make sure to set LPCR[LPES] so that external interrupts set SRR0 and SRR1
instead of HSRR0 and HSRR1. Without this, external interrupt handlers would
get the wrong MSR value when executing, causing eventual madness.
Created by: Nathan Whitehorn <nwhitehorn@freebsd.org>
Submitted by: Wojciech Macek <wma@freebsd.org>
Sponsored by: FreeBSD Foundation
Fix AP startup, which was broken.
Created by: Nathan Whitehorn <nwhitehorn@freebsd.org>
Submitted by: Wojciech Macek <wma@freebsd.org>
Sponsored by: FreeBSD Foundation
Add basic power control (reset, power off) and bind
ttyuX to opal console so that init will start login there.
Created by: Nathan Whitehorn <nw@freebsd.org>
Submitted by: Wojciech Macek <wma@freebsd.org>
Sponsored by: FreeBSD Foundation
Unconditional 32-bit shift is not endianness-safe.
Modify the logic to work both on LE and BE.
Submitted by: Wojciech Macek <wma@freebsd.org>
Reviewed by: np
Obtained from: Semihalf
Sponsored by: IBM, QCM Technologies
Differential revision: https://reviews.freebsd.org/D13102
OPAL is a dedicated firmware acting as a hypervisor.
Add generic functions to provide all access.
Created by: Nathan Whitehorn <nw@freebsd.org>
Submitted by: Wojciech Macek <wma@freebsd.org>
shutdown_post_sync event. For adashutdown, this causes problems
because we need to poll for completion of the commands, but we're not
yet officially dumping yet, so the code from r326964 assumed we could
use the interrupt-driven commands rather than the polled ones. This
lead to a hang. Prevent this by also checking to see if the scheduler
is stopped to do the polling.
Reported by: markj@
Sponsored by: Netflix
Differential Review: https://reviews.freebsd.org/D13845
In particular, no probes were present for AEAD requests, but also for
some other error cases in other ioctl requests.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
- Call resource_int_value() once during attach, rather than within the
pci_(read|write)_config() code path; this avoids taking a blocking mutex
to read kenv variables.
- Use a spin lock to protect non-atomic config space accesses; this matches
the behavior of Darwin's AppleMacRiscPCI driver.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D13839
Additionally, move the overflow check logic out to WOULD_OVERFLOW() for
consumers to have a common means of testing for overflowing allocations.
WOULD_OVERFLOW() should be a secondary check -- on 64-bit platforms, just
because an allocation won't overflow size_t does not mean it is a sane size
to request. Callers should be imposing reasonable allocation limits far,
far, below overflow.
Discussed with: emaste, jhb, kp
Sponsored by: Dell EMC Isilon
Previously the AIO subsystem would save a snapshot of the currently
configured per-process limits the first time a process used AIO. The
process would continue to use the snapshotted limits ignoring any
changes to the global limits during the rest of its lifetime. This
change removes the snapshotted values and changes the AIO code to
always check the global values which can be toggled at runtime.
This means an administrator can now change the effective limits of
existing processes. This is more consistent with how other limits
configured via sysctl work in FreeBSD.
Reviewed by: asomers, kib
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D13819
This permits N32 hard-float binaries to use 64-bit floating point
registers (which is what N32 binaries expect) matching the N64 ABI.
Reviewed by: imp, jmallett
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D13830
Basic use of mallocarray to prevent overflows. Here allocation is done
with M_NOWAIT so the code is prepared for the possibility of returning
NULL values. Since mallocarray expects unsigned parameters, unsign some
related variables to minimize sign conversions.
Reviewed by: mckusick
We would previously just free the request BIO, which would either cause
the disk to stay stuck in the SYNCHRONIZING state, or result in
synchronization completing without having copied the block which
returned an error.
With this change, if the disk which returned an error is the only active
disk in the mirror, the synchronizing disk is kicked out. Otherwise, the
read is retried.
Reported and tested by: pho (previous version)
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
The driver now fully observes watchdog(9) protocol.
Previously a too large timeout was silently clamped while the correct
behavior is to disable the watchdog and leave the error as is
(i.e. to not report success).
Also, previously a too small value caused the timer to stop while the
correct behavior is to use the minimal supported value.
MFC after: 2 weeks
Iwasaki-san's copyright over. Remove FIXME code that couldn't possibly
work. Call tc_settime() with our estimate of the delta we've been
alseep (the one we print) to adjust the time. Not sure what to do
about callouts, so keep the small #ifdef in place there.
Differential Revision: https://reviews.freebsd.org/D13823
more in r317426. There's nothing in the tree that references digiio.h
(apart from digictl(8)), so no driver implements it. Since digictl(8)
was only used to control digi(4) devices, it too should go.
Add an implementation of the intrinsics invoked by __builtin_ctz{,ll} and
__builtin_clz{,ll}, and include this compilation unit on platforms that lack
assembly intrinsics for those builtins (MIPS and RISC-V).
Future cleanup work might involve bringing these into a mini libcompiler-rt
for the standalone kernel environment. Or cleaning up the approach upstream
takes for builtins in standalone environments (or just FreeBSD). For now,
at least this builds, and doesn't require modifying the vendor code.
Reported by: jeff, markj, mizhka
Reviewed by: jhb (earlier version), rpokala (comment text earlier version)
Sponsored by: Dell EMC Isilon
g_mirror_regular_request() may free the gmirror consumer for a disk
if that disk is being disconnected, after which we must not dereference
the consumer pointer.
CID: 1384280
X-MFC with: r327496
RTC chips that have a control register bit for am/pm mode, the DS13xx series
uses one of the high bits in the hour register. Thus, when setting the time
in am/pm mode, the am/pm mode flag has to be ORed into the hour.
- If aio_qphysio() returns a non-zero error code, fail the request rather
than queueing it to the AIO kproc pool to be retried via the slow path.
Currently this means that if vm_fault_quick_hold_pages() reports an
error, EFAULT is returned from the fast-path rather than retrying the
request in the slow path where it will still fail with EFAULT.
- If aio_qphysio() wishes to use the fast path for a device that doesn't
support unmapped I/O but there are already the maximum number of
such requests in flight, fail with EAGAIN as we do for other AIO
resource limits rather than queueing the request to the AIO kproc pool.
- Move the opcode check for aio_qphysio() out of the caller and into
aio_qphysio() to simplify some logic and remove two goto's while here.
It also uses a whitelist (only supported for LIO_READ / LIO_WRITE)
rather than a blacklist (skipped for LIO_SYNC).
PR: 217261
Submitted by: jkim (an earlier version)
MFC after: 2 weeks
Sponsored by: Chelsio Communications
If the MD_VERIFY flag is set, we should use O_VERIFY. If the MD_VERIFY flag
is not set, we should not.
Reviewed by: stevek
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13814
Specifically, in aio_queue_file() the code was doing this:
if (opcode == LIO_SYNC) {
...
}
switch (opcode) {
...
case LIO_SYNC:
...
}
This moves the body of the if statement into the LIO_SYNC case of the
switch statement.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Disable Zstd experimental support for __BMI__ intrinsics, when built with
-march=foo supporting such intrinsics, to avoid attempting to include
immintrin.h. If a later Zstd marks the support non-experimental, we may want
to revisit this approach.
Submitted by: jkim
Reported by: jkim, "Oliver Hartmann" <ohartmann AT walstatt.org>
supported on newer POWER hardware and in graphical VMs run on the same,
which are typically XHCI-only. The 32-bit GENERIC kernel, which
does not run on hardware made in the last decade and is unlikely to
encounter XHCI devices, is left unchanged.
PR: kern/224940
Submitted by: Gustavo Romero
MFC after: 1 week
inline ccbque.h into scsi_low.h. The file isn't MD, so shouldn't live
in i386/isa. It's only used by scsi_low, so move it there so no new
clients accidentally grow. scsi_low may not even still work, and the
locking here is still SPL based. CAM should do the right thing, but
I've received no reports of these cards still working. At least it
compiles still and there's one fewer files in sys/i386/isa. While I'm
here, ansify and de-splize. CCB_MWANTED appears to be a clear-only
flag, but I've not changed that.
Differential Review: https://reviews.freebsd.org/D13672
a mask and value to compare with the Main ID Register. If these match then a
function is called to handle the installation of the erratum workaround.
No errata are currently handled, however this will change soon in a future
commit.
MFC after: 1 week
Sponsored by: DARPA, AFRL
This is a followup to r307903.
struct svm_softc takes more than 200 kilobytes while what we really need
is 3 contiguous pages for I/O permission map and 2 contiguous pages for
MSR permission map. Other physically mapped structures have a size of
a single page, so a proper alignment is sufficient for their correct
mapping.
Thus, only the permission maps are allocated with contigmalloc now,
the softc is allocated with a regular malloc.
Additionally, this commit adds a check that malloc returns memory with the
expected page alignment and that contigmalloc does not fail.
Unfortunately, at present svm_vminit() is expected to always succeed and
there is no way to report an error.
So, a contigmalloc failure leads to a panic.
We should probably fix this.
MFC after: 2 weeks
The code accesses bp->b_dep without owning the ufs mount softdep lock,
which makes it possible for the derefenced workitem to be freed in
parallel. In particular, the deallocate_dependencies(),
softdep_disk_io_initiation() and softdep_disk_write_complete() are
affected.
Move the code to safely calculate ump from the buffer with
dependencies into the helper softdep_bp_to_mp() and use it for all
found cases.
Tested by: pho (as part of the bigger patch)
Reviewed by: mckusick (as part of the bigger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
handle_written_XXX() in case of processing the buffer with an error.
Tested by: pho (as part of the bigger patch)
Reviewed by: mckusick (as part of the bigger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
so that buf_complete() sees fully constructed buffer.
This is a NOP right now, but will be needed by the forthcoming SU change.
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
that was not allocated will be accessed.
This necessitated refactoring state seed allocation from
ipf_state_soft_init() into a new common ipf_state_seed_alloc() function
as it is now also used by ipf_state_rehash() when changing the size of
the state hash table in addition to by ipf_state_soft_init() during
initialization.
According to Christos Zoulas <christos@NetBSD.org>:
The bug was encountered by a NetBSD vendor who's customer machines had
large ipfilter states. The bug was reliably triggered by resizing the
state variables using "ipf -T".
Submitted by: Christos Zoulas <christos@NetBSD.org>
Reviewed by: delphij, rgrimes
Obtained from: NetBSD ip_state.c CVS revs r1.9 and r1.10
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D13755
By disabling the -Winline warning. Fixes the powerpc and sparc64 build
after r327706.
Note: MIPS and RISCV builds still broken due to absense of __ctzdi2 (aka
__builtin_ctzll) in their libgcc or libcompiler-rt libraries.
Reported by: markj
Sponsored by: Dell EMC Isilon
from the ada and da dump routines. This avoids difficult locking
problems from needing to be handled. While it might seem like this
would leave the periphs unprotected during dump, they were aleady
at risk of unexpected removal due to the dump functions not
keeping refcount state across the many calls that come in during
a dump. This is an exercise for future work.
Obtained from: Netflix
We currently use a set of subroutines in kern_gzio.c to perform
compression of user and kernel core dumps. In the interest of adding
support for other compression algorithms (zstd) in this role without
complicating the API consumers, add a simple compressor API which can be
used to select an algorithm.
Also change the (non-default) GZIO kernel option to not enable
compressed user cores by default. It's not clear that such a default
would be desirable with support for multiple algorithms implemented,
and it's inconsistent in that it isn't applied to kernel dumps.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D13632
Mock userspace headers and include mocked headers first in compilation
command to inject kernel headers and override e.g., malloc(3) with
malloc(9).
Submitted by: allanjude
Reviewed by: imp (earlier version), bapt (earlier version)
Differential Revision: https://reviews.freebsd.org/D10407
malloc(9): drop the __result_use_check attribute for the kernel allocator.
My bad: __result_use_check just checks the for the general and we always
want to make sure allocated memory is used, not only checked for nullness.
Add it to reallocf since that was missing.
The __result_use_check attribute was brought to the kernel malloc in
r281203 for consistency with the userland malloc.
For the case of the M_WAITOK flag, the kernel malloc(), realloc(), and
reallocf() cannot return NULL so in that case the __result_use_check
attribute makes no sense.
We don't have any way of conditionalizing such attributes so just drop it.
MFC after: 3 days
pfioctl() handles several ioctl that takes variable length input, these
include:
- DIOCRADDTABLES
- DIOCRDELTABLES
- DIOCRGETTABLES
- DIOCRGETTSTATS
- DIOCRCLRTSTATS
- DIOCRSETTFLAGS
All of them take a pfioc_table struct as input from userland. One of
its elements (pfrio_size) is used in a buffer length calculation.
The calculation contains an integer overflow which if triggered can lead
to out of bound reads and writes later on.
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Similar to calloc() the mallocarray() function checks for integer
overflows before allocating memory.
It does not zero memory, unless the M_ZERO flag is set.
Reviewed by: pfg, vangyzen (previous version), imp (previous version)
Obtained from: OpenBSD
Differential Revision: https://reviews.freebsd.org/D13766
The sid controller on the H3 is generally identical in location, size, and
efuse offset to the a64 and the a83t. The main difference is that the H3 has
a silicon bug that sometimes causes the rootkey (at least) to be garbled
unless first read by the prctl registers.
This device is currently not in our DTS and, as of now, is not yet present
in mainline Linux DTS.
Tested on: OrangePi One
Technically supported on the later SoCs, this will only really be used to
add support for the H3 sid. The H3 has a silicon bug that manifests itself
by returning garbled rootkeys unless first read via the prctl registers.
ian@ pointed out that BUS_PASS_DEFAULT + $anything is bogus, given that
BUS_PASS_DEFAULT is defined as __INT_MAX. Instead, we take a page out of
imx6_usbphy's book and use BUS_PASS_DEFAULT - 1000 to achieve the desired
effect of syscon_generic attaching before if_awg and other potential
consumers, but late enough that more specialized implementations should have
no problem attaching instead.
Reported by: ian
It still needs to be before if_awg at least in order to be available for
other operations, but it should not be attaching before interrupt
controllers at the very least.
This should make errors involving syscon register space colliding with other
devices a little more innocent, but these conflicts should really be tracked
down and resolved. One such conflict is with the Raspberry Pi 3 local
interrupt controller, noticed by tuexen@
Reported by: tuexen
After recent changes to change filesystems to use filesystem-specific
limits, LINK_MAX is no longer used in the base system. Applications
should in theory be able to cope with a lack of LINK_MAX by using
pathconf().
PR: 224628 (exp-run)
Approved by: imp, kib
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D13658
Add cpuctl(4) ioctl CPUCTL_EVAL_CPU_FEATURES which forces re-read of
cpu_features, cpu_features2, cpu_stdext_features, and
std_stdext_features2.
The intent is to allow the kernel to see the changes in the CPU
features after micocode update. Of course, the update is not atomic
across variables and not synchronized with readers. See the man page
warning as well.
Reviewed by: imp (previous version), jilles
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13770
The emac bindings that are landing in Linux 4.15 specify a syscon property
on the emac node that point to /soc/syscon. Use this property if it's
specified, but maintain backwards compatibility with the old method.
The older method is still used for boards that we get .dtb from u-boot, such
as pine64, that did not yet have stable emac bindings.
Tested on: Banana Pi-M3 (a83t)
Tested on: Pine64 (a64)
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D13296
This avoids re-reading a variable after it has been updated via an
atomic op. It is just a cosmetic cleanup as the read value was only
used to control a diagnostic printf that should rarely occur (if ever).
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D13768
For the pathname reported in kinfo_vmentry structures (kve_path), the
sysctl handlers walk the object chain to find the bottom-most VM object.
This permits a COW mapping of a file with dirty pages to report the
pathname of the originally mapped file. Do the same for the object
offset (kve_offset) computing a cumulative offset during the same object
walk so that the reported offset is relative to the reported pathname.
Note that ptrace(PT_VM_ENTRY) already returns a cumulative offset
rather than the raw offset of the VM map entry.
Note also that this does not affect procstat -v output (even structured
output) since that output does not include the kve_offset field.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D13767
Even though pthreads doesn't support this, there are various alternative
APIs that use this. For example, uv_cond_timedwait() accepts a relative
timeout. So does Rust's std::sync::Condvar::wait_timeout().
Though I personally think that relative timeouts are bad (due to
imprecision for repeated operations), it does seem that people want
this. Extend the existing futex functions to keep track of whether an
absolute timeout is used in a boolean flag.
MFC after: 1 month
Disabled the use of RSS hash from the network card aka flowid for
lagg(4) interfaces by default as it's currently incompatible with
the lacp and loadbalance protocols.
The incompatibility is due to the fact that the flowid isn't know
for the first packet of a new outbound stream which can result in
the hash calculation method changing and hence a stream being
incorrectly split across multiple interfaces during normal
operation.
This can be re-enabled by setting the following in loader.conf:
net.link.lagg.default_use_flowid="1"
Discussed with: kmacy
Sponsored by: Multiplay
The default 80MHz clock speed returned by bhnd_pmu_si_clock() was already
correct; this just prevents the "No backplane clock specified" warning
printf from being emitted when querying backplane clock speed.
Sponsored by: The FreeBSD Foundation
Consolidate the regions covered by the process lock.
Combine similar conditions tests into one, e.g. all process flags can
be test with one logical operation.
Add check for in-exec state, since p_vmspace is dererenced.
Remove labels and goto by explicitly tracking state.
Update comments.
Reviewed by: alc, markj (previous version)
Tested by: pho (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D13693
its per-thread kernel stack pages by making them pass through the inactive
queue first. Instead, immediately place them in the laundry so that they
might be cleaned and made available for reclamation sooner.
Reviewed by: kib, markj
MFC after: 1 week
The data segement was too big.
Add a fix-up function like on ia32 for MAXDSIZ.
While here, bring also the MAXSSIZ closer to amd64 and add an equal fix-up
function for MAXSSIZ.
Reviewed by: jhibbits@
Obtained from: jhibbits@
Differential Revision: https://reviews.freebsd.org/D13753
