Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
Do not use macros in the -width of a .Bl, since mandoc does not support them.
Fix issues reported by igor and mandoc -Tlint.
Use a .Bl for list of clock IDs instead of a comma list.
MFC after: 3 days
Sponsored by: Dell EMC
Add notes to each of these that specifically state that results are
undefined if the strings overlap. In the case of memcpy, we document
the overlapping behavior on FreeBSD (pre-existing). For str*, it is
left unspecified, however, since the default (and x86) implementations
do not handle overlapping strings properly.
PR: 223653
Sponsored by: Netflix
syslog in libc secretly reconnects to the daemon.
Another issue is that we don't have any information from openlog(3) if we
succeeded to open log or not so we don't know if we are ready
to enter cabability mode.
Because all of that we decided we need a syslog service for Caspser.
Reviewed by: bapt@
Differential Revision: https://reviews.freebsd.org/D12824
function, so check if cap_chanel_t is NULL is not enough.
Casper with a normal libc will still fail in capability mote so let's not
enter capability mode without casper support when we need to resolve DNS.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D12823
This API allows callers to enumerate all known pages, including any
direct map & kernel map virtual addresses, physical addresses, size,
offset into the core, & protection configured.
For architectures that support direct map addresses, also generate pages
for any direct map only addresses that are not associated with kernel
map addresses.
Fix page size portability issue left behind from previous kvm page table
lookup interface.
Reviewed by: jhb
Sponsored by: Backtrace I/O
Differential Revision: https://reviews.freebsd.org/D12279
We started out having Linux compatible libefivar interfaces. This was
in anticipation of porting the GPL'd efibootmgr to FreeBSD via a
port. However, since we need that functionality in the base, that port
isn't going to happened. It also appears that efivar is a private
library that's not used much outside a command line util and
efibootmgr. Reduce compatibility with the Linux version a little by
removing the mode parameter to efi_set_variable (which was unused on
FreeBSD, and not set to something useful in the code we'd
written). Also remove some efi error routines that were never
implemented and existed only to placate early GPL efibootmgr porting
experiments.
Suggested by: Matt Williams
Sponsored by: Netflix
This allows the _SKIP_DEPEND optimization to work, avoiding reading
the files when not needed. It also fixes META_MODE incorrectly
reading these files when not needed.
Sponsored by: Dell EMC Isilon
* Don't test MACHINE, it's irrelevant to userland and should never be
used in userland Makefiles.
* If we match armv[67] and CPUTYPE is undefined OR it doesn't have
'soft' in it, choose armhf.
* Add a note that the soft float on armv[67] may be broken.
Sponsored by: Netflix
:U:Mfoo expands to :Mfoo, apparently. Explicit check for CPUTYPE being
defined, and test for it's value not containing *soft* before calling CRTARCH
armhf.
Tested, somewhat. Unfortunately recent changes appear to have affected
cross-builds where it no longer works, per my tests after universe12a being
upgraded from 07/2017 to 11/2017 sources (DESTDIR isn't being used in WORLDTMP;
MK_SYSTEM_COMPILER might be causing issues right now).
MFC after: 1 week
MFC with: r325502
Reported by: imp
CPUTYPE (apparently) isn't defined in non-cross-builds, which caused
arm/armv[67] hosted/targeted builds to fail when evaluating CPUTYPE.
Add the :U modifier to CPUTYPE so it evaluates to "". This allows armv[67] to
get past the conditional successfully.
MFC after: 1 week
Reported by: bob prohaska <fbsd@www.zefox.net>
- MK_PROFILE is controlled in bsd.opts.mk, which is pulled in via bsd.own.mk,
which is pulled in via bsd.init.mk . All upstream Makefiles which build off
of this one use bsd.init.mk.
- COMPILER_{TYPE,VERSION} is set via bsd.compiler.mk .
This reduces the namespace pollution/complexity somewhat.
MFC after: 1 week
Despite the fact that it's a working solution, it doesn't follow the design
philosophy of only doing TARGET_* in Makefile.inc1 and special locations in
the source tree.
PR: 222925
Requested by: imp
- Define TARGET_CPUARCH and use in libclang_rt as the basis for CRTARCH
When cross-compiling, the wrong architecture was being embedded in the
libclang_rt binary filenames. It should be based on TARGET_ARCH (target), not
MACHINE_ARCH (host).
If TARGET_ARCH isn't defined (host-builds), fallback to MACHINE_ARCH.
- Define CRTARCH to armhf when TARGET/TARGET_ARCH are set to arm/armv[67]
TARGET_ABI/TARGET_CPU in Makefile.inc1 sets the ABI to gnueabihf, which
affects the clang lookup path per `getArchNameForCompilerRTLib(..)` in
contrib/llvm/tools/clang/lib/Driver/ToolChain.cpp, so chase clang and
Linux's assumed naming convention for hard-float arm architectures.
CROSSENV (in Makefile.inc1) sets CPUTYPE/MACHINE(_ARCH)? to the
TARGET*-relevant values when building the `libraries` target, so test
those variables instead.
- Add OLD_FILES/OLD_LIBS entries for TARGET/TARGET_ARCH == arm/armv[67]. This
impacts only arm/armv6 and arm/armv7.
PR: 222925
Several of the flags were being treated as CFLAGS, when they were actually
technically CXXFLAGS. Move them there.
Only apply -fno-sanitize=safe-stack with clang.
PR: 223179
TARGET_ABI/TARGET_CPU in Makefile.inc1 sets the ABI to gnueabihf, which affects
the clang lookup path per getArchNameForCompilerRTLib(..) in
contrib/llvm/tools/clang/lib/Driver/ToolChain.cpp .
This is a follow up to r324873.
PR: 222925
As of r325320 posix_fallocate returns EINVAL on ZFS to indicate that
the underlying filesystem does not support this operation, per
POSIX.1-2008. Document this case in the man page.
MFC after: 20 days
MFC with: r325320
Sponsored by: The FreeBSD Foundation
respected.
Please notice that libcasper is already in ObsoleteFiles so we don't add it
again.
Reported by: Herbert J. Skuhra <herbert@mailbox.org>
Reviewed by: bdrewery@
Differential Revision: https://reviews.freebsd.org/D12918
mt(1) man page.
LTO-8 Type M (also known as M8) is a pristine LTO-7 cartridge
formatted in a LTO-8 drive in a new, higher density format. It
has a separate density code, and is only readable in an LTO-8
drive.
lib/libmt/mtlib.c:
Add the LTO-8 Type M density code to the density table
in libmt.
usr.bin/mt/mt.1:
Add the LTO-8 Type M density code to the density
table in the mt(1) man page.
MFC after: 3 days
Sponsored by: Spectra Logic
For statically linked binaries, where all relocation are solved by static
linker, the linker expect that offset to TLS section is aligned. Additionaly,
to maintain absolute alignment, TLS TCB should by also aligned.
Obtained from: CheriBSD (initial version)
MFC after: 1 month
Reviewed by: brooks (previous version), kib
Differential Revision: https://reviews.freebsd.org/D12907
{}'s around the if (c == EOF) block to prevent potential 'trailing else'
issues from being introduced when refactoring. As my gets_s() code
is based on this, it makes sense to fix the same issue here first
here and now, then do an svn copy again to capture this history).
Suggested by: ed@ in D12785
When trying to build world for MIPS64 with clang I was getting
linker errors because of a missing reference to std::get_new_handler().
It turns out std::get_new_handler() was not listed in Version.map so it was
marked as a local symbol in libcxxrt.so.
Reviewed by: theraven, brooks (mentor), emaste
Approved by: trasz
Obtained from: CheriBSD
Differential Revision: https://reviews.freebsd.org/D11925
The bug is an out-of-bounds read detected with address sanitizer that
happens when 'sp' in p_b_coll_elems() includes NUL byte[s], e.g. if it's
equal to "GS\x00". In that case len will be equal to 4, and the
strncmp(cp->name, sp, len) call will succeed when cp->name is "GS" but the
cp->name[len] == '\0' comparison will cause the read to go out-of-bounds.
Checking the length using strlen() instead eliminates the issue.
The bug was found in LLVM with oss-fuzz:
https://reviews.llvm.org/D39380
MFC after: 1 week
Obtained from: Vlad Tsyrklevich through posting on openbsd-tech
The idea behinds mocks is that we don't need to ifdef a lot of code in
tools itself but those defines are hidden in the casper library.
Right now the mocks are implemented as define/inlines functions.
There was a very long discussion how this should be implemented.
This approach has some advantages like we don't need to link to any additional
libraries. Unfortunately there are also some disadvantages for example it is
easy to get library out of sync between two versions of functions or that we
need extra define to compile program with casper support.
This isn't an ideal solution but it's good enough for now and should simplify
capsicumizing programs. This also doesn't close us any other ways to do those
mocks and this should evolve in time.
Discussed with: pjd, emaste, ed, rwatson, bapt, cem, bdrewery
Differential Revision: https://reviews.freebsd.org/D8753
Previously, this didn't work because L2ARC devices' labels don't contain
pool GUIDs. Modify zfsd so that the pool GUID won't be required:
lib/libdevdctl/guid.h
Change INVALID_GUID from a uint64_t constant to a function that
returns an invalid Guid object. Remove the void constructor.
Nothing uses it, and it violates RAII.
cddl/usr.sbin/zfsd/case_file.h
cddl/usr.sbin/zfsd/case_file.cc
Allow CaseFile::Find to match a CaseFile based on Vdev GUID alone.
In CaseFile::ReEvaluate, attempt to online devices even if the newly
arrived device has no pool GUID.
cddl/usr.sbin/zfsd/vdev_iterator.cc
Iterate through a pool's cache devices as well as its regular
devices.
Reported by: avg
Reviewed by: avg
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D12791
bother passing it to crypt(). It won't succeed and may allow an attacker
to confirm that the user exists.
Reported by: jkim@
MFC after: 1 week
Security: CVE-2016-6210
The Makefile.inc1 TARGET_TRIPLE is for specifying which -target is used
during the build of world.
MFC after: 2 weeks
Reviewed by: dim, imp
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12792
RB_POWERCYCLE instructs the platform to power off and then power back
on a short time later, if that's possible. Otherwise, degrade to the
RB_POWEROFF behavior.
Sponsored by: Netflix
library -- libpmcstat.
This includes PMC logging module, symbols lookup functions,
ELF parsing, process management, PMC attachment, etc.
This allows to reuse code while building new hwpmc(4)-based applications.
Also add pmcstat_symbol_search_by_name() function that allows to find
mapped IP range for a given function name.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12718
In r322258 I made p1003_1b.aio_listio_max a tunable. However, further
investigation shows that there was never any good reason for that limit to
exist in the first place. It's used in two completely different ways:
* To size a UMA zone, which globally limits the number of concurrent
aio_suspend calls.
* To artifically limit the number of operations in a single lio_listio call.
There doesn't seem to be any memory allocation associated with this limit.
This change does two things:
* Properly names aio_suspend's UMA zone, and sizes it based on a new constant.
* Eliminates the artifical restriction on lio_listio. Instead, lio_listio
calls will now be limited by the more generous max_aio_queue_per_proc. The
old p1003_1b.aio_listio_max is now an alias for
vfs.aio.max_aio_queue_per_proc, so sysconf(3) will still work with
_SC_AIO_LISTIO_MAX.
Reported by: bde
Reviewed by: jhb
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D12120
Several of the flags were being treated as CFLAGS, when they were actually
technically CXXFLAGS. Move them there.
Also, only apply -fno-sanitize=safe-stack with clang.
This is a draft diff.
PR: 223179
When cross-compiling, the wrong architecture was being embedded in the
libclang_rt binary filenames. It should be based on TARGET_ARCH (target), not
MACHINE_ARCH (host).
This is a draft commit against my project branch. Will fix on ^/head soon.
PR: 222925
one call to sysctl(2) from jemalloc startup code. (That also requires
changes to jemalloc, but I plan to push those to upstream first.)
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12745
libc++experimental.a on arm (r318654) and mips (r318859) anymore, since
upstream fixed the static assertions which would occur.
Noticed by: George Abdelmalik <gabdelmalik@uniridge.com.au>
PR: 223119
MFC after: 3 days
- Teach elf aux vector functions about newly added AT_HWCAP and AT_HWCAP2
vectors.
- Export _elf_aux_info() as new public libc function elf_aux_info(3)
The elf_aux_info(3) should be considered as FreeBSD counterpart of glibc
getauxval() with more robust interface.
Note:
We cannot name this new function as getauxval(), with glibc compatible
interface. Some ports autodetect its existence and then expects that all
Linux specific AT_<*> vectors are defined and implemented.
MFC after: 1 month
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D12743
In FreeBSD 11 and later debug.iosize_max_clamp defaults to 0, and the
maximum nbytes count for write(2) is SSIZE_MAX. Update the man page to
document this, and mention the sysctl that can be set to obtain the
previous behaviour.
PR: 196666
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
geom_gettree(3) and geom_deletetree(3) functions provided by libgeom and are
not documented in libgeom(3).
Reviewed by: mav, bjk, allanjude
Approved by: allanjude
Differential Revision: https://reviews.freebsd.org/D12679
Uses the same method as in tools/tools/ifinfo/ifinfo.c
(via net.link.generic sysctl).
Tested with modified wlandebug(8).
Differential Revision: https://reviews.freebsd.org/D12554
posix_fallocate is logically equivalent to writing zero blocks to the
desired file size and there is no reason to prevent calling it in
capability mode. posix_fallocate already checked for the CAP_WRITE
right, so we merely need to list it in capabilities.conf.
Reviewed by: allanjude
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12640
Make armv7 as a new MACHINE_ARCH.
Copy all the places we do armv6 and add armv7 as basically an
alias. clang appears to generate code for armv7 by default. armv7 hard
float isn't supported by the the in-tree gcc, so it hasn't been
updated to have a new default.
Support armv7 as a new valid MACHINE_ARCH (and by extension
TARGET_ARCH).
Add armv7 to the universe build.
Differential Revision: https://reviews.freebsd.org/D12010
On Variant I TLS architectures (aarch64, arm, mips, powerpc, and riscv)
the __libc_allocate_tls function allocates thread local storage memory
with calloc(). It then copies initialization data over the portions with
non-zero initial values. Before this change it would then pointlessly
zero the already zeroed remainder of the storage. Unfortunately the
calculation was wrong and it would zero TLS_TCB_SIZE (2*sizeof(void *))
additional bytes.
In practice, this overflow only matters if the TLS segment is sized such
that calloc() allocates a less than TLS_TCB_SIZE extra memory. Even
then, the likely result will be zeroing part of the next bucket. This
coupled with the impact being confined to Tier II platforms means there
will be no security advisory for this issue.
Reviewed by: kib, dfr
Discussed with: security-officer (delphij)
MFC after: 1 week
Found by: CHERI
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12547
"P" instead of "?" in "procstat -af" output. Note that there are
still a few more DTYPE_* kinds we don't decode yet.
Reported by: rwatson
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12426
Violators may define _WANT_SOCKET and _WANT_UNPCB respectively and
are not guaranteed for stability of the structures. The violators
list is the the usual one: libprocstat(3) and netstat(1) internally
and lsof in ports.
In struct xunpcb remove the inclusion of kernel structure and add
a bunch of spare fields. The xsocket already has socket not included,
but add there spares as well. Embed xsockbuf into xsocket.
Sort declarations in sys/socketvar.h to separate kernel only from
userland available ones.
PR: 221820 (exp-run)
Fix regression by r318539. The sysutils/pstack uses library libthread_db to
read information about threads state. The function pt_ta_new makes lookup of
several key symbols including _thread_keytable. But r318539 mades this field
static. It causes silent ignore of libthr library by pstack and as result
sysutils/pstack doesn't output any thread information.
This fix changes this field back to non-static.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D11738
Sync libarchive with vendor.
Relevant vendor changes:
PR #905: Support for Zstandard read and write filters
PR #922: Avoid overflow when reading corrupt cpio archive
Issue #935: heap-based buffer overflow in xml_data (CVE-2017-14166)
OSS-Fuzz 2936: Place a limit on the mtree line length
OSS-Fuzz 2394: Ensure that the ZIP AES extension header is large enough
OSS-Fuzz 573: Read off-by-one error in RAR archives (CVE-2017-14502)
MFC after: 1 week
Security: CVE-2017-14166, CVE-2017-14502
Also fix the style of the asprintf(3) call in __collate_load_tables_l().
Both of these lines were modified away from snprintf(3) during the
import from DragonFly/Illumos.
Reviewed by: jilles (briefly over shoulder)
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
check hash to cylinder groups. If a check hash fails when a cylinder
group is read, no further allocations are attempted in that cylinder
group until it has been fixed by fsck. This avoids a class of
filesystem panics related to corrupted cylinder group maps. The
hash is done using crc32c.
Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily
used in embedded systems with small memories and low-powered processors
which need as light-weight a filesystem as possible.
Specifics of the changes:
sys/sys/buf.h:
Add BX_FSPRIV to reserve a set of eight b_xflags that may be used
by individual filesystems for their own purpose. Their specific
definitions are found in the header files for each filesystem
that uses them. Also add fields to struct buf as noted below.
sys/kern/vfs_bio.c:
It is only necessary to compute a check hash for a cylinder
group when it is actually read from disk. When calling bread,
you do not know whether the buffer was found in the cache or
read. So a new flag (GB_CKHASH) and a pointer to a function to
perform the hash has been added to breadn_flags to say that the
function should be called to calculate a hash if the data has
been read. The check hash is placed in b_ckhash and the B_CKHASH
flag is set to indicate that a read was done and a check hash
calculated. Though a rather elaborate mechanism, it should
also work for check hashing other metadata in the future. A
kernel internal API change was to change breada into a static
fucntion and add flags and a function pointer to a check-hash
function.
sys/ufs/ffs/fs.h:
Add flags for types of check hashes; stored in a new word in the
superblock. Define corresponding BX_ flags for the different types
of check hashes. Add a check hash word in the cylinder group.
sys/ufs/ffs/ffs_alloc.c:
In ffs_getcg do the dance with breadn_flags to get a check hash and
if one is provided, check it.
sys/ufs/ffs/ffs_vfsops.c:
Copy across the BX_FFSTYPES flags in background writes.
Update the check hash when writing out buffers that need them.
sys/ufs/ffs/ffs_snapshot.c:
Recompute check hash when updating snapshot cylinder groups.
sys/libkern/crc32.c:
lib/libufs/Makefile:
lib/libufs/libufs.h:
lib/libufs/cgroup.c:
Include libkern/crc32.c in libufs and use it to compute check
hashes when updating cylinder groups.
Four utilities are affected:
sbin/newfs/mkfs.c:
Add the check hashes when building the cylinder groups.
sbin/fsck_ffs/fsck.h:
sbin/fsck_ffs/fsutil.c:
Verify and update check hashes when checking and writing cylinder groups.
sbin/fsck_ffs/pass5.c:
Offer to add check hashes to existing filesystems.
Precompute check hashes when rebuilding cylinder group
(although this will be done when it is written in fsutil.c
it is necessary to do it early before comparing with the old
cylinder group)
sbin/dumpfs/dumpfs.c
Print out the new check hash flag(s)
sbin/fsdb/Makefile:
Needs to add libufs now used by pass5.c imported from fsck_ffs.
Reviewed by: kib
Tested by: Peter Holm (pho)
Make scan-build happy by casting to 'void *' instead of 'void **'.
Submitted by: pjd@
MFC after: 1 month
Found by: scan-build and cppcheck
Sponsored by: Wheel Systems
Previously we'd have an assertion failure in cap_rights_is_set if
sysdecode_cap_rights is called with an invalid cap_rights_t, so test for
validity first.
PR: 222258
Reviewed by: cem
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12391
After r308212 Capsicum permits .. lookups in capability mode, as long as
path component traversal does not escape the directory corresponding to
the provided file descriptor.
We should add a description of the vfs.lookup_cap_dotdot and
vfs.lookup_cap_dotdot_nonlocal sysctls, perhaps as a cross-reference to
capsicum(4). I intend to look at that soon.
Reviewed by: bjk, cem, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12343
Fix allocating more memory for the names (unlikely to be needed, but
still best to get right) to ask for the length the kernel told use we
needed, not the old length of the variable. Mind the proper NUL that
we add in the space we allocate. Free the old name string before we
allcoate a new one to limit what we leak to the last one (free passed
in name for the last one in the list), and detect the last one by rv
!= 0 and errno == ENOENT, rather then just the former to avoid false
positives if errno happens to be ENOENT on entry.
Sponsored by: Netflix
The memory can be leaked if we will have pkt set and will get an error
during tftp_open() processing.
Differential Revision: https://reviews.freebsd.org/D12202
efidp_size will return the size, in bytes, of a EFI device path
structure. This is a convenience wrapper in the same style as the
other linux routines. It's implemented by GetDevicePathSize from EDK2
we already needed for other things.
Sponsored by: Netflix
Avoid dealing with some code that uses type-punned pointers.
See D12210 and D12211 for more background.
Reviewed by: imp
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12219
Move tables that were previously in truss over to libsysdecode. truss
output is unchanged, but kdump has been updated to decode these fields.
In addition, sysdecode_sysarch_number() should support all platforms
whereas the old table in truss only supported x86.
the upstream release_50 branch. This corresponds to 5.0.0 rc4.
As of this version, the cad/stepcode port should now compile in a more
reasonable time on i386 (see bug 221836 for more information).
PR: 221836
MFC after: 2 months
X-MFC-with: r321369
o Add File to the mUefiDevicePathLibDevPathFromTextTable table so we
don't include 'File()' in the supposed path name. This happens because
of a possible misfeature in the EDK2 code where any path that's not
recognized is treated as a File() node.
o Convert utf8 input into ucs2 output rather than just copying the
utf8 and hoping for the best (no good comes from that).
o Remove bogus comment about needing to add 1. The dummy array already
is length 1, so that's included in sizeof the struct, so there's no
need to add it.
Sponsored by: Netflix
Device paths encoded into the FILEPATH_DEVICE_PATH are UCS2 not
ASCII/UTF8. Convert to utf8 and print that when printing File
paths. Also, since File may be at the end of a long device path,
output File() around the path so it doesn't just show up as random
nodes that might accidentally match real node paths names and cause
errors.
LLVM's MIPS assembler parser does not understand the GNU as
'.gnu_attribute' keyword. This could be re-enabled if LLVM is updated
in the future. The desired floating point ABI is already described in
the .MIPS.abiflags section.
Reviewed by: emaste
Sponsored by: DARPA / AFRL
LDBL_MAX is broken on i386:
https://lists.freebsd.org/pipermail/freebsd-numerics/2012-September/000288.html
Gcc has produced +Infinity for LDBL_MAX on i386 and amd64 with -m32
for some time, and newer versions of gcc are now warning that the
"floating constant exceeds range of 'long double'". Avoid this by
referring to proxy values instead.
Reviewed by: bde
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
conversion functions use SSE2 instructions, but these are not guarded by
#ifdef __SSE2__, and there is no implementation using general purpose
registers. For these functions, use the generic C variants instead,
otherwise they will cause SIGILL on older processors.
Reported by: bsdpr@phoe.frmug.org
PR: 221733
MFC after: 1 week
Illumos and Schillix is adopting some of the locale code and our style(9)
sometimes matches the Solaris cstyle, so the changes are also useful as a
way to reduce diffs.
No functional change.
Discussed with: Joerg Schilling
MFC after: 1 week
getmntinfo(3) is designed around a relatively static or slow growing set of
current mounts. It tried to detect a race with somewhat concurrent mount
and re-call getfsstat(2) in that case, looping indefinitely. It also
allocated space for a single extra mount as slop.
In the case where the user has a large number of mounts and is adding them
at a rapid pace, it fell over.
This patch makes two functional changes:
1. Allocate even more slop. Double whatever the last getfsstat(2) returned.
2. Abort and return some known results after looping a few times
(arbitrarily, 3). If the list is constantly changing, we can't guarantee
we return a full result to the user at any point anyways.
While here, add very basic functional tests for getmntinfo(3) to the libc
suite.
PR: 221743
Submitted by: Peter Eriksson <peter AT ifm.liu.se> (earlier version)
Sponsored by: Dell EMC Isilon
the upstream release_50 branch.
As of this version, lib/msun's trig test should also work correctly
again (see bug 220989 for more information).
PR: 220989
MFC after: 2 months
X-MFC-with: r321369
- Include debug symbols in static libraries. This permits binaries
to include debug symbols for functions obtained from static libraries.
- Permit the C/C++ compiler flags added for MK_DEBUG_FILES to be
overridden by setting DEBUG_FILES_CFLAGS. Use this to limit the debug
information for llvm libraries and binaries.
Reviewed by: emaste
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D12025
These builtins were listed in the mips-specific Symbol.map for libc but
were not implemented. Compiling mips with recent clang requires these
symbols.
Sponsored by: DARPA / AFRL
instructions, if supported both by CPU and kernel.
Reviewed by: jhb (previous version)
Tested by: pho (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Differential revision: https://reviews.freebsd.org/D12023
the host argument (e.g. "www.freebsd.org:443"), the service pointer,
which is supposed to point to the port or service part, instead points
to the separator, causing getaddrinfo() to fail.
Note that I have not been able to trigger this bug with fetch(1), nor
do I believe it is possible, as libfetch always parses the host:port
specification itself. I discovered it when I copied fetch_resolve()
into an unrelated project.
MFC after: 3 days
lld can successfully link most of a working i386 userland and kernel,
but produces a broken libc. For now if we're otherwise using lld, and
ld.bfd is available, explicitly use it for libc.
Sponsored by: The FreeBSD Foundation
Non-tests/... changes:
- Add HAS_TESTS= to Makefiles with libraries and programs to enable iteration
and propagate the appropriate environment down to *.test.mk.
tests/... changes:
- Add appropriate support Makefile.inc's to set HAS_TESTS in a minimal manner,
since tests/... is a special subdirectory tree compared to the others.
MFC after: 2 months
MFC with: r322511
Reviewed by: arch (silence), testing (silence)
Differential Revision: D12014
On i386 with CPUID but without SSE2, set lfence_works to LMB_NONE
instead of looping.
Reported and tested by: Andre Albsmeier <andre@fbsd.e4m.org>
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
The reachover Kyuafiles were never added, and thus the tests were installed
as standalone tests, and not integrated into the full suite.
MFC after: 1 week
MFC with: r305626, 305629, r307863, r322447, r322448, r322449
of freefall.freebsd.org to unbreak the DNS tests
The address allocations for freefall.freebsd.org have changed in the past 4 years.
Use a more stable set of hardcoded addresses for now to make the tests succeed
reliably.
The hostname should be resolved dynamically instead of hardcoding the addresses in
the future. This is just a bandaid.
MFC after: 1 week
Some of the testcases try to manipulate sysctls that require root privileges,
e.g., "kern.sync_on_panic". Make root-privileges a hard requirement so the
tests don't raise false positives due to privilege issues when calling
sysctlbyname(3) on writable sysctls.
MFC after: 1 week
- Flushing stdout prevents the buffer from being printed twice, fixing
issues with stdout printing out the testplan, etc, twice.
- Don't print out raw source/line numbers; hide them behind comments.
MFC after: 1 week
S_IRUSR is defined in sys/stat.h
PR: 209229
Submitted by: <mt AT markoturk DOT info>
Approved by: bcr (mentor)
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D12007
abort_handler_s() currently simply calls abort(), though the standard
specifies more: "Writes an implementation-defined message to stderr
which must include the string pointed to by msg and calls abort()."
memset_s() is missing error condition "n > smax", and does not invoke
the constraint handler after filling the buffer: "following errors are
detected at runtime and call the currently installed constraint
handler function after storing ch in every location of the destination
range [dest, dest+destsz) if dest and destsz are themselves valid",
one of the errors is "n > smax" itself.
Submitted by: Yuri Pankov <yuripv@gmx.com>
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D11991
LDBL_MAX is broken on i386:
https://lists.freebsd.org/pipermail/freebsd-numerics/2012-September/000288.html
Gcc has produced +Infinity for LDBL_MAX on i386 and amd64 with -m32
for some time, and newer versions of gcc are now warning that the
"floating constant exceeds range of 'long double'". Avoid this by
referring to half the value of LDBL_MAX instead.
Reviewed by: bde
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
function instead of unlink(2).
Now when pidfile_remove() uses unlinkat(2) to remove the pidfile
it is safe to use this function in capability mode.
Style fix: sort headers.
PR: 220524
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D11692
In a recent interpretation[1], "\\" shall return a non-zero value
(indicating either no match or an error).
The fix involves a change over r254091 and now the behavior matches the
Sun/IBM/HP closed source implementations and also likely musl libc.
Submitted by: Joerg Schilling <joerg at schily.net>
MFC after: 1 week
[1] http://austingroupbugs.net/view.php?id=806
New version is not compatible on supervisor mode with v1.9.1
(previous version).
Highlights:
o BBL (Berkeley Boot Loader) provides no initial page tables
anymore allowing us to choose VM, to build page tables manually
and enable MMU in S-mode.
o SBI interface changed.
o GENERIC kernel.
FDT is now chosen standard for RISC-V hardware description.
DTB is now provided by Spike (golden model simulator). This
allows us to introduce GENERIC kernel. However, description
for console and timer devices is not provided in DTB, so move
these devices temporary to nexus bus.
o Supervisor can't access userspace by default. Solution is to
set SUM (permit Supervisor User Memory access) bit in sstatus
register.
o Compressed extension is now turned on by default.
o External GCC 7.1 compiler used.
o _gp renamed to __global_pointer$
o Compiler -march= string is now in use allowing us to choose
required extensions (compressed, FPU, atomic, etc).
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11800
Apply the changes from upstream jemalloc 048c6679. This is actually not
quite a cherry pick due to makefile difference and because FreeBSD does
not carry the msvc project files which were also modified in that
commit.
Approved by: jasone (maintainer), markj (mentor)
Sponsored by: Dell EMC Isilon
FIODTYPE will be needed by hexdump(1) to speed up the -s flag on devices
that should be able to support fseek(3); specifically, in an attempt to
correct for the fact that most tape drives don't support seeking yet don't
indicate as such when fseeko(3) is invoked. Related: D10939
Reviewed by: cem, emaste, oshogbo
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D10937
Some libusb consumers in Linux-land (in this case, libusb4java) expect a
dev_capability member that they can use to enumerate the device
capabilities.
No particular layout is expected of this, just that it can be traversed
using the bLength member until bNumDeviceCapabilities are read and that the
consumer may then use one of the libusb_get_*_descriptor methods to extract
specific (usb 2.0 vs. ss) capability information.
In collaboration with: hselasky
Reviewed by: hselasky
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D11494
Adding features for matching is fairly straightforward, but this requires
some duplication because of this fast/slow setup. They can be fairly
trivially combined into a single walk(), so do it to make future additions
less error prone.
Reviewed by: cem (earlier version), emaste, pfg
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D11233
Currently, regex(3) exhibits the following wrong behavior as demonstrated
with sed:
- echo "a{1,2,3}b" | sed -r "s/{/_/" (1)
- echo "a{1,2,3}b" | sed "s/\}/_/" (2)
- echo "a{1,2,3}b" | sed -r "s/{}/_/" (3)
Cases (1) and (3) should throw errors but they actually succeed, and (2)
throws an error when it should match the literal '}'. The correct behavior
was decided by comparing to the behavior with the equivalent BRE (1)(3) or
ERE (2) and consulting POSIX, along with some reasonable evaluation.
Tests were also adjusted/added accordingly.
PR: 166861
Reviewed by: emaste, ngie, pfg
Approved by: emaste (mentor)
MFC after: never
Differential Revision: https://reviews.freebsd.org/D10315
o Replace __riscv64 with (__riscv && __riscv_xlen == 64)
This is required to support new GCC 7.1 compiler.
This is compatible with current GCC 6.1 compiler.
RISC-V is extensible ISA and the idea here is to have built-in define
per each extension, so together with __riscv we will have some subset
of these as well (depending on -march string passed to compiler):
__riscv_compressed
__riscv_atomic
__riscv_mul
__riscv_div
__riscv_muldiv
__riscv_fdiv
__riscv_fsqrt
__riscv_float_abi_soft
__riscv_float_abi_single
__riscv_float_abi_double
__riscv_cmodel_medlow
__riscv_cmodel_medany
__riscv_cmodel_pic
__riscv_xlen
Reviewed by: ngie
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11901
I'm not sure what process sjg@ was using, but using CHECKDIR=${.OBJDIR} with
"make check" on ^/head is the correct thing to do. This unbreaks "make check"
for me (unsandboxed, not using CHECKDIR=${.OBJDIR}).
While here, fix a whitespace nit with LIBADD.
MFC after: 1 week
0.8.4:
- void anchor width optimization when we have a custom formatter (https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=221130)
- make "{[:/18}" do the right thing (also allows "{[:/%s}", wide ? 40 : 10)
- Can't skip anchor formatting in non-display styles
- add test case for {[:/18}
- add upload-xohtml-files to 'make upload'
0.8.3:
- xohtml: Add "-w" option to pull support files from gh_pages
- Add "upload-xohtml-files" target to publish support files in gh_pages/
- add HISTORY/AUTHORS section to man pages
0.8.2:
- xohtml: Add div.units as standard CSS text
- Don't treat values as format strings; they are not
- add "-p" to "mkdir -p build" in setup.sh
- add test case for {U:%%} (from df.c)
- detect end-of-string in '%' and '' escaping
- make xo_simple_field, for common simple cases
- xohtml: nuke "n" in "echo" commands
- rename "format" to "fmt" for consistency; same for "str" to "value"
Submitted by: phil
