The DS_FIELD_LARGE_BLOCKS macro has been unused since the integration of
this patch:
commit ca0cc3918a1789fa839194af2a9245f801a06b1a
Author: Matthew Ahrens <mahrens@delphix.com>
Date: Fri Jul 24 09:53:55 2015 -0700
5959 clean up per-dataset feature count code
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
This patch simply removes this macro from dsl_dataset.h.
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Author: Matthew Ahrens <mahrens@delphix.com>
When changing zfs_arc_max (e.g. as zdb does), it may be set to less
than the default arc_c_min. arc_c_min should decrease to not be more than
arc_c_max, but it doesn't; therefore tuning of arc_c_max is ineffective.
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Author: Matthew Ahrens <mahrens@delphix.com>
openzfs/openzfs@608764bead
The cxgbev/cxlv driver supports Virtual Function devices for Chelsio
T4 and T4 adapters. The VF devices share most of their code with the
existing PF4 driver (cxgbe/cxl) and as such the VF device driver
currently depends on the PF4 driver.
Similar to the cxgbe/cxl drivers, the VF driver includes a t4vf/t5vf
PCI device driver that attaches to the VF device. It then creates
child cxgbev/cxlv devices representing ports assigned to the VF.
By default, the PF driver assigns a single port to each VF.
t4vf_hw.c contains VF-specific routines from the shared code used to
fetch VF-specific parameters from the firmware.
t4_vf.c contains the VF-specific PCI device driver and includes its
own attach routine.
VF devices are required to use a different firmware request when
transmitting packets (which in turn requires a different CPL message
to encapsulate messages). This alternate firmware request does not
permit chaining multiple packets in a single message, so each packet
results in a firmware request. In addition, the different CPL message
requires more detailed information when enabling hardware checksums,
so parse_pkt() on VF devices must examine L2 and L3 headers for all
packets (not just TSO packets) for VF devices. Finally, L2 checksums
on non-UDP/non-TCP packets do not work reliably (the firmware trashes
the IPv4 fragment field), so IPv4 checksums for such packets are
calculated in software.
Most of the other changes in the non-VF-specific code are to expose
various variables and functions private to the PF driver so that they
can be used by the VF driver.
Note that a limited subset of cxgbetool functions are supported on VF
devices including register dumps, scheduler classes, and clearing of
statistics. In addition, TOE is not supported on VF devices, only for
the PF interfaces.
Reviewed by: np
MFC after: 2 months
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7599
If a packet contains the Ethernet header (14 bytes) in the first mbuf
and the payload (IP + UDP + data) in the second mbuf, then the attempt
to fetch the l3hdr will return a NULL pointer. The first loop iteration
will drop len to zero and exit the loop without setting 'p'. However,
the desired data is at the start of the second mbuf, so the correct
behavior is to loop around and let the conditional set 'p' to m_data of
the next mbuf (and leave offset as 0).
Reviewed by: np
Sponsored by: Chelsio Communications
the data cache to the point of unification. This is the point where the
two caches are unified to a single unified cache so cleaning past here
is just extra unneeded work.
This was noticed when investigating r305545.
Reported by: bz
Obtained from: ABT Systems Ltd
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
page is non-executable the contents of the i-cache are unimportant so this
call is just adding unneeded overhead when inserting pages.
While doing research using gem5 with an O3 pipeline and 1k/32k/1M iTLB/L1
iCache/L2 Bjoern Zeeb (bz@) observed a fairly high rate of calls into
arm64_icache_sync_range() from pmap_enter() along with a high number of
instruction fetches and iTLB/iCache hits.
Limiting the calls to arm64_icache_sync_range() to only executable pages,
we observe the iTLB and iCache Hit going down by about 43%. These numbers
are quite misleading when looked at alone as at the same time instructions
retired were reduced by 19.2% and instruction fetches were reduced by 38.8%.
Overall this reduced the runtime of the test program by 22.4%.
On Juno hardware, in steady-state, running the same test, using the cycle
count to determine runtime, we do see a reduction of up to 28.9% in runtime.
While these numbers certainly depend on the program executed, we expect an
overall performance improvement.
Reported by: bz
Obtained from: ABT Systems Ltd
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Due to reading initialized variable, FIS receive area was always allocated
as 256 bytes, suitable for command-based switching, instead of 4096 bytes,
required for FIS-based switching. This caused memory corruption in case of
port multipliers used on FBS-capable HBAs (Marvell).
MFC after: 1 week
More changes to MIPS may be required, as commented in D7692, but this
revision aims to restore MIPS INTRNG functionality so we can move on
with working interrupts.
Reported by: yamori813@yahoo.co.jp
Tested by: mizhka (on BCM), sgalabov (on Mediatek)
Reviewed by: adrian, nwhitehorn (older version)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D7692
Let drivers for Alpine CCU, NB and Serdes take care of internal SoC configuration.
Obtained from: Semihalf
Submitted by: Michal Stanek <mst@semihalf.com>
Sponsored by: Annapurna Labs
Reviewed by: imp,wma
Differential Revision: https://reviews.freebsd.org/D7566
This commit adds drivers for Alpine Cache Coherency Unit
and North Bridge Service whose task is to configure
the system fabric and enable cache coherency.
Obtained from: Semihalf
Submitted by: Michal Stanek <mst@semihalf.com>
Sponsored by: Annapurna Labs
Reviewed by: wma
Differential Revision: https://reviews.freebsd.org/D7565
pmap_early_io_map()/pmap_early_io_unmap(), if used in pairs, should be used in
the form:
pmap_early_io_map()
..do stuff..
pmap_early_io_unmap()
Without other allocations in the middle. Without reclaiming memory this can
leave large holes in the device space.
While here, make a simple change to the unmap loop which now permits it to unmap
multiple TLB entries in the range.
Such errors can occur as the result of a write error or because the disk
backing the mirror element was removed. They result in a generation ID bump
on all active elements of the mirror, so we can safely disconnect the mirror
component rather than destroy it.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D7750
These are useful for testing changes to I/O error handling, and for
reproducing existing bugs in a controlled manner. The fail points are
g_mirror_regular_request_read
g_mirror_regular_request_write
g_mirror_sync_request_read
g_mirror_sync_request_write
g_mirror_metadata_write
They all effectively allow one to inject an error value into the bio_error
field of a corresponding BIO request as it is being completed.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
have the serious problem of not actually attaching the hardware they
are driving at the bus level. This causes creator(4) and machfb(4)
to attach and drive the very same hardware in parallel when both
syscons(4) and vt(4) as well as their associated hardware drivers
are built into a kernel, i. e. GENERIC, at the same time.
Also, syscons(4) and its drivers still are way superior to vt(4) and
its equivalents; unlike the syscons(4) counterparts the vt(4) drivers
don't provide hardware acceleration resulting in considerably slower
screen drawing, creator_vt(4) doesn't provide a /dev/fb node as
required by the Xorg sunffb(4) etc. In theory, vt_ofwfb(4) should be
able to handle more devices than machfb(4). However, testing shows
that it hardly works with any hardware machfb(4) isn't also able to
drive, making vt(4) and vt_ofwfb(4) not favorable for the time being
from that perspective either.
MFC after: 3 days
Use C99 designators to set the value of each slot and the nitems macro to
check for valid entries. In the process, switch to indexing by signal
number rather than signal-1 for improved clarity.
Obtained from: CheriBSD (a6053c5abf03a5f53bbfcdd3a26429383f67e09f)
Sponsored by: DARPA, AFRL
Reviewed by: kib
The previous code was forcing an expensive walk in vop_stdvptocnp,
which was causing performance issues on highly contended zfs.
No objections: kib
MFC after: 2 weeks
Add routines to trigger a function level reset (FLR) of a PCI-express
device via the PCI-express device control register. This also includes
support routines to wait for pending transactions to complete as well
as calculating the maximum completion timeout permitted by a device.
Change the ppt(4) driver to reset pass through devices before attaching
to a VM during startup and before detaching from a VM during shutdown.
Reviewed by: imp, wblock (earlier version)
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7751
This driver supports two bindings:
- cpufreq-dt: systems which share clock and voltage across all CPUs
- arm_big_little_dt: systems which share clock and voltage across all
CPUs in a single cluster
Reviewed by: andrew, imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D7741
When the I/O MMU is active in bhyve, all PCI devices need valid entries
in the DMAR context tables. The I/O MMU code does a single enumeration
of the available PCI devices during initialization to add all existing
devices to a domain representing the host. The ppt(4) driver then moves
pass through devices in and out of domains for virtual machines as needed.
However, when new PCI devices were added at runtime either via SR-IOV or
HotPlug, the I/O MMU tables were not updated.
This change adds a new set of EVENTHANDLERS that are invoked when PCI
devices are added and deleted. The I/O MMU driver in bhyve installs
handlers for these events which it uses to add and remove devices to
the "host" domain.
Reviewed by: imp
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7667
Note that this introduces an explicit 2GB limit, but this was already
implicit in variable and function argument types.
This is based on the "non-cryptanalytic attacks against freebsd
update components" anonymous gist. Further refinement is planned.
Reviewed by: allanjude, cem, kib
Obtained from: anonymous gist
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7619
This allows a pass through device to be reset to a normal device driver
on the host and reused on the host. ppt devices are now always active in
some I/O MMU domain when the I/O MMU is active, either the host domain
or the domain of a VM they are attached to.
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7666
This is required on my system, which loads nvidia, vmm, and zfs, and 48M is
no longer enough for that. nvidia-driver's recent update increased its size
by several megabytes.
Reviewed by: jhb
MFC after: 1 week
format specifier for pointers when printing them out with printf(3)
MFC after: 57 days
Pointyhat to: ngie
Reported by: bz, cy, Jenkins (i386 job)
Submitted by: cy
Sponsored by: EMC / Isilon Storage Division
Other files including pci_host_generic.h failed to compile
due to missing declaration of enum pci_id_type.
Obtained from: Semihalf
Submitted by: Michal Stanek <mst@semihalf.com>
Sponsored by: Annapurna Labs
Reviewed by: wma
Differential Revision: https://reviews.freebsd.org/D7561
