Note that these changes will not make the driver work on powerpc, but it should fix at least the i386/amd64 cases.
Obtained from: //depot/projects/usb/src/sys/dev/usb2/wlan/if_zyd2.c#20
Noticed by: jeli, ed
vnode in question does not need to be held. All the data structures used
during the name lookup are protected by the global name cache lock.
Instead, the caller merely needs to ensure a reference is held on the
vnode (such as vhold()) to keep it from being freed.
In the case of procfs' <pid>/file entry, grab the process lock while we
gain a new reference (via vhold()) on p_textvp to fully close races with
execve(2).
For the kern.proc.vmmap sysctl handler, use a shared vnode lock around
the call to VOP_GETATTR() rather than an exclusive lock.
MFC after: 1 month
flag. Specifically, if two threads race to create a dirhash for a
directory, then one might already have created a private dirhash
structure (and locked it) when it realizes the directory now has a
structure and tries to lock that one.
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
Also: Change the initialisation of the command string to a static
initialiser. Verify it against the output of umass.c when being sent a
command using 'camcontrol eject da0' to a Bulk-Only device.
This should make those devices work that need a SCSI eject command to
switch to modem mode (Novatel 950D and others).
chdir(), chroot(), eaccess(), fpathconf(), fstat(), fstatfs(), lseek()
(when figuring out the current size of the file in the SEEK_END case),
pathconf(), readlink(), and statfs() system calls.
Submitted by: ups (mostly)
Tested by: pho
MFC after: 1 month
Really, the concept of holdcnt in the struct mount is rappresented by
the mnt_ref (which prevents the type-stable structure from being
"recycled) handled through vfs_ref() and vfs_rel().
On this optic, switch the holdcnt acquisition into an emulated vfs_ref()
(and subsequent release into vfs_rel()).
Discussed with: kib
Tested by: pho
The smb library in userspace already knows how to deal with this type of
cloning.
This also corrects a leak in which the netsmb kernel module could not be
unloaded if device nodes had been stat'd but not open'd.
Discussed with: kib
and server. This replaces the RPC implementation of the NFS client and
server with the newer RPC implementation originally developed
(actually ported from the userland sunrpc code) to support the NFS
Lock Manager. I have tested this code extensively and I believe it is
stable and that performance is at least equal to the legacy RPC
implementation.
The NFS code currently contains support for both the new RPC
implementation and the older legacy implementation inherited from the
original NFS codebase. The default is to use the new implementation -
add the NFS_LEGACYRPC option to fall back to the old code. When I
merge this support back to RELENG_7, I will probably change this so
that users have to 'opt in' to get the new code.
To use RPCSEC_GSS on either client or server, you must build a kernel
which includes the KGSSAPI option and the crypto device. On the
userland side, you must build at least a new libc, mountd, mount_nfs
and gssd. You must install new versions of /etc/rc.d/gssd and
/etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf.
As long as gssd is running, you should be able to mount an NFS
filesystem from a server that requires RPCSEC_GSS authentication. The
mount itself can happen without any kerberos credentials but all
access to the filesystem will be denied unless the accessing user has
a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There
is currently no support for situations where the ticket file is in a
different place, such as when the user logged in via SSH and has
delegated credentials from that login. This restriction is also
present in Solaris and Linux. In theory, we could improve this in
future, possibly using Brooks Davis' implementation of variant
symlinks.
Supporting RPCSEC_GSS on a server is nearly as simple. You must create
service creds for the server in the form 'nfs/<fqdn>@<REALM>' and
install them in /etc/krb5.keytab. The standard heimdal utility ktutil
makes this fairly easy. After the service creds have been created, you
can add a '-sec=krb5' option to /etc/exports and restart both mountd
and nfsd.
The only other difference an administrator should notice is that nfsd
doesn't fork to create service threads any more. In normal operation,
there will be two nfsd processes, one in userland waiting for TCP
connections and one in the kernel handling requests. The latter
process will create as many kthreads as required - these should be
visible via 'top -H'. The code has some support for varying the number
of service threads according to load but initially at least, nfsd uses
a fixed number of threads according to the value supplied to its '-n'
option.
Sponsored by: Isilon Systems
MFC after: 1 month
allocating resources to read the CIS. I'm not sure when this changed,
but it is totally wrong. Also, add a minor improvement to the
debugging.
This should help everybody trying to run dumpcis on atheros wireless
card as well.
MFC after: 2 days
right... Good thing the size was ignored...
Where this macro is used, there's no reason to do it anyway. There
seems to have been some old-time confusion between the CIS pointer
definition, and the BAR definitions at the base of this bug.
compiled into the main AMR driver. It's code that is nice to have but not
required for normal operation, and it is reported to cause problems for some
people.
usable for newer CPUs. The new value allows 2 x quad core configuration
dumps to fit within the initial buffer without reallocations.
Approved by: gnn (mentor) (older version)
Pointed out by: rdivacky
dropping the connection when the requested service isn't available, or
we may try to release a lock that isn't locked.
This prevents an assertion failure when trying to mount a non-present
share using smbfs with INVARIANTS; a lock order reversal warning that
immediately follows is not yet fixed.
Reported by: attilio
MFC after: 3 days
For an unknown reason the touch pad of my PowerBook generates button 5
events when you operate it. This causes the adb_mouse code to convert
them to button 2 events, which is not what we want.
Add a new flag, AMS_TOUCHPAD, which is used to distinguish the touch
pad. When set, don't convert button events of unknown buttons to the
last button.
There are still three problems left with respect to user input:
- The mouse button events are not properly processed when the touch pad
isn't touched.
- The arrow keys on the keyboard don't work inside X11.
- The power button isn't handled by the kernel, similar to the ACPI
power button on i386/amd64.
Approved by: nwhitehorn
Make the ISA bus keep track of more PNP details. Plus a minor style
fix while I'm here. More could be done here, but except for some SBCs
that don't have ACPI, there's limited value to anybody in doing so.
use process ID as ACPI thread ID. Concurrent requests with equal thread
IDs broke ACPI mutexes operation causing unpredictable errors including
AE_AML_MUTEX_NOT_ACQUIRED that I have seen.
Use kernel thread ID instead of process ID for ACPI thread.
- Implement real draining for vfs consumers by not relying on the
mnt_lock and using instead a refcount in order to keep track of lock
requesters.
- Due to the change above, remove the mnt_lock lockmgr because it is now
useless.
- Due to the change above, vfs_busy() is no more linked to a lockmgr.
Change so its KPI by removing the interlock argument and defining 2 new
flags for it: MBF_NOWAIT which basically replaces the LK_NOWAIT of the
old version (which was unlinked from the lockmgr alredy) and
MBF_MNTLSTLOCK which provides the ability to drop the mountlist_mtx
once the mnt interlock is held (ability still desired by most consumers).
- The stub used into vfs_mount_destroy(), that allows to override the
mnt_ref if running for more than 3 seconds, make it totally useless.
Remove it as it was thought to work into older versions.
If a problem of "refcount held never going away" should appear, we will
need to fix properly instead than trust on such hackish solution.
- Fix a bug where returning (with an error) from dounmount() was still
leaving the MNTK_MWAIT flag on even if it the waiters were actually
woken up. Just a place in vfs_mount_destroy() is left because it is
going to recycle the structure in any case, so it doesn't matter.
- Remove the markercnt refcount as it is useless.
This patch modifies VFS ABI and breaks KPI for vfs_busy() so manpages and
__FreeBSD_version will be modified accordingly.
Discussed with: kib
Tested by: pho
a little refinement, but is good enough to commit as is.
# Should look to see if I should move swab(3) into the kernel or just
# provide the unoptimized routine here.
Reviewed by: marcel@
whatever template was used to create this driver. It is not
necessary, and wouldn't work anyway since (a) this device will never
be in a cardbus tin-can and (b) the driver isn't even PCI, but instead
a built-in NIC on the IDT RC32434 on its internal bus.
record queue, so move the offset field from the per-record
audit_pipe_entry structure to the audit_pipe structure.
Now that we support reading more than one record at a time, add a
new summary field to audit_pipe, ap_qbyteslen, which tracks the
total number of bytes present in a pipe, and return that (minus
the current offset) via FIONREAD and kqueue's data variable for
the pending byte count rather than the number of bytes remaining
in only the first record.
Add a number of asserts to confirm that these counts and offsets
following the expected rules.
MFC after: 2 months
Sponsored by: Apple, Inc.
We often run into these very high column numbers when we run curses
applications, because they don't print any newlines. This messes up the
table output of `pstat -t'. If these numbers get really high, they
aren't of any use to the reader anyway. Convert them to `99999' when
they run out of bounds.
One of the pieces of code that I had left alone during the development
of the MPSAFE TTY layer, was tty_cons.c. This file actually has two
different functions:
- It contains low-level console input/output routines (cnputc(), etc).
- It creates /dev/console and wraps all its cdevsw calls to the
appropriate TTY.
This commit reimplements the second set of functions by moving it
directly into the TTY layer. /dev/console is now a character device node
that's basically a regular TTY, but does a lookup of `si_drv1' each time
you open it. d_write has also been changed to call log_console().
d_close() is not present, because we must make sure we don't revoke the
TTY after writing a log message to it.
Even though I'm not convinced this is in line with the future directions
of our console code, it is a good move for now. It removes recursive
locking from the top half of the TTY layer. The previous implementation
called into the TTY layer with Giant held.
I'm renaming tty_cons.c to kern_cons.c now. The code hardly contains any
TTY related bits, so we'd better give it a less misleading name.
Tested by: Andrzej Tobola <ato iem pw edu pl>,
Carlos A.M. dos Santos <unixmania gmail com>,
Eygene Ryabinkin <rea-fbsd codelabs ru>
Right now ams_read() uses cv_wait() to wait for new data to arrive on
the mouse device. This means that when you run `cat /dev/ams0', it
cannot be interrupted directly. After you press ^C, you first need to
move the mouse before cat will quit. Make this function use
cv_wait_sig(), which allows it to be interrupted directly.
Reviewed by: nwhitehorn
cable tuning. This has helped in some installations for hardware
deployed by a former employer. Made optional because the lists aren't
full of complaints about these cards... even when they were wildly
popular.
Reviewed by: attilio@, jhb@, trhodes@ (all an older version of the patch)
read(2), which meant that records longer than the buffer passed to read(2)
were dropped. Instead take the approach of allowing partial reads to be
continued across multiple system calls more in the style of streaming
character device.
This means retaining a record on the per-pipe queue in a partially read
state, so maintain a current offset into the record. Keep the record on
the queue during a read, so add a new lock, ap_sx, to serialize removal
of records from the queue by either read(2) or ioctl(2) requesting a pipe
flush. Modify the kqueue handler to return bytes left in the current
record rather than simply the size of the current record.
It is now possible to use praudit, which used the standard FILE * buffer
sizes, to track much larger record sizes from /dev/auditpipe, such as
very long command lines to execve(2).
MFC after: 2 months
Sponsored by: Apple, Inc.
processes exits at the same time. The linux_emuldata structure is freed
but p->p_emuldata is left as a dangling pointer to the just freed memory.
The check for W_EXIT in the loop scanning the child processes isn't safe
since the state of the child process can change right afterwards. Lock
the process and check the W_EXIT before delivering signal.
Submitted by: tegge
Reviewed by: davidxu
MFC after: 1 week
within an object that a mapping refers to. fileid and fsid are inode/dev
for vnodes. (Linux procfs has these and valgrind is really unhappy
without them.) I believe I didn't change the size of the struct.
on G4 machines. On the assumption that most people using FreeBSD on Apple
hardware are not using serial consoles, set boot1's output to screen. This
should be revisited. While here, reduce verbosity of boot1.
pipe has overflowed, drop the newest, rather than oldest, record. This
makes overflow drop behavior consistent with memory allocation failure
leading to drop, avoids touching the consumer end of the queue from a
producer, and lowers the CPU overhead of dropping a record by dropping
before memory allocation and copying.
Obtained from: Apple, Inc.
MFC after: 2 months
protecting the list of audit pipes, and a per-pipe mutex protecting the
queue.
Likewise, replace the single global condition variable used to signal
delivery of a record to one or more pipes, and add a per-pipe condition
variable to avoid spurious wakeups when event subscriptions differ
across multiple pipes.
This slightly increases the cost of delivering to audit pipes, but should
reduce lock contention in the presence of multiple readers as only the
per-pipe lock is required to read from a pipe, as well as avoid
overheading when different pipes are used in different ways.
MFC after: 2 months
Sponsored by: Apple, Inc.
mutex, as it's rarely changed but frequently accessed read-only from
multiple threads, so a potentially significant source of contention.
MFC after: 1 month
Sponsored by: Apple, Inc.
capabilities reported by the ap. These need to be cross-checked
against the local configuration in the vap. Previously we were
only checking the ap capabilities which meant that if an ap reported
it was ff-capable but we were not setup to use them we'd try to do
ff aggregation and drop the frame.
There are a number of problems to be fixed here but applying this
fix immediately as the problem causes all traffic to stop (and has
not workaround).
Reported by: Ashish Shukla
access control checks in mac_bsdextended are not in the same
namespace as the MBI_ flags used in ugidfw policies, so add an
explicit conversion routine to get from one to the other.
Obtained from: TrustedBSD Project
sdhci supports up to 65535 blocks transfers, at91_mci - one block.
Enable multiblock operations disabled before to follow at91_mci driver
limitations.
Reviewed by: imp@
dump of detected ULE CPU topology. This dump can be used to check the
topology detection and for general system information.
An example of CPU topology dump is:
kern.sched.topology_spec: <groups>
<group level="1" cache-level="0">
<cpu count="8" mask="0xff">0, 1, 2, 3, 4, 5, 6, 7</cpu>
<flags></flags>
<children>
<group level="2" cache-level="0">
<cpu count="4" mask="0xf">0, 1, 2, 3</cpu>
<flags></flags>
</group>
<group level="2" cache-level="0">
<cpu count="4" mask="0xf0">4, 5, 6, 7</cpu>
<flags></flags>
</group>
</children>
</group>
</groups>
Reviewed by: jeff
Approved by: gnn (mentor)
while doing the block store workaround so we restore the correct
floating-point registers state in case of nested floating-point
operations resulting from nested interrupts. This allows the
VIS-based block copy/zero functions to be used on machines
requiring this workaround. Alternatively, we could take care of
saving the floating-point registers here, which would be more
inefficiently though and also involves turning off interrupts.
- It turns out that the SCZ_PCI_DMA_SYNC register doesn't work
like the TOMXMS_PCI_DMA_SYNC_PEND one (but more like the
corresponding register in of Hummingbird and Sabre bridges)
and writing the INO of the respective device to it causes a
Safari bus error. However, due to the Schizo errata I-23,
SCZ_PCI_DMA_SYNC can't be used as intended either, so remove
consistent DMA syncing for Schzio bridges for now, which means
that add-on cards with non-"sun4u compliant" (whatever that
means exactly) PCI-PCI-bridges should be avoided until the
proper workaround is implemented. [1]
Reported by: Michael Moll [1]
This should fix q_time overflow, which happens after 2^32/(86400*hz) days of
uptime (~50days for hz = 1000).
q_time overflow cause following:
- traffic shaping may not work in 'fast' mode (not enabled by default).
- incorrect average queue length calculation in RED/GRED algorithm.
NB: due to ABI change this change is not applicable to stable.
PR: kern/128401
to add more V* constants, and the variables changed by this patch were often
being assigned to mode_t variables, which is 16 bit.
Approved by: rwatson (mentor)
memory mappings when the MAC label on a process changes, to
mac_proc_vm_revoke(),
It now also acquires its own credential reference directly from the
affected process rather than accepting one passed by the the caller,
simplifying the API and consumer code.
Obtained from: TrustedBSD Project
vpollinfo with vnode interlock. Fully initialize vpollinfo before putting
pointer to it into vp->v_pollinfo.
Discussed with: dwhite
Tested by: pho
MFC after: 1 week
that they operate directly on credentials: mac_proc_create_swapper(),
mac_proc_create_init(), and mac_proc_associate_nfsd(). Update policies.
Obtained from: TrustedBSD Project
be a no-op request, and why this might have to change if we want to allow
leaving a partition someday.
Obtained from: TrustedBSD Project
MFC after: 3 days
"ticks" goes negative. This breaks the signed comparison in softclock.
This causes sleep() to never wake up, tcp to stop, etc etc. This is
bad(TM). Use the SEQ_LT() method from tcp's sequence number comparisons.
driver (rev 1.3), by Joerg Sonnenberger.
Note: This change is untested as I do not own the hardware. Let me know
if things work or do not work for you by sending me the output dmesg (and
usbctl -f /dev/usbX if possible). Thanks.
for the BCM5714 revision A0 when in a multi-port configuration
and unconditionally for the remainder of the class of BCM575X
and beyond chips.
This was prodded by mav and is based on a suggestion and a
patch submitted by jhb.
Reviewed by: jhb
MFC after: 2 months
V9 stack bias so we no longer need to add it in db_backtrace()
and stack_capture() respectively. This also reverts r182018,
which kludged around the resulting unaligned access.
- Sync the sun4v versions of db_trace.c and stack_machdep.c with
the sparc64 ones and fix some style bugs.
MFC after: 3 days
rs400/rs480 should clear the RADEON_BUS_MASTER_DIS bit. This should get
the rs485 IGP chips going again.
Approved by: jhb (mentor)
Obtained from: drm git master
making the use of sc_hwmap to do direct mapping impractical. Switch to
indexing by the rate index instead of the rate code and adjust associated
state and logic appropriately. This has several benefits including
simplification of the led code.
o fix radiotap capture of HT rates
o fix conditional compilation of HT radiotap support to be based on the
hal having 5416 support; not the ABI version as hal builds may or may
not include 5416 support
o update tx rssi data only when an ACK was received
o return tx rssi from sampled data instead of the last frame
o track noise floor
o return rx rssi and noise floor (was broken)
o pass country code, outdoor indication, and ecm mode into the hal
when requesting a channel list
o add a console msg when regulatory setup fails
o add placeholder code to map between Atheros sku's and 802.11 sku's
that handles only the debug country code used to unlock the full
channel list (to be used only for debugging)
o fix multiple instances of mismapping the 802.11 location to the
outdoor indication (anywhere may be outdoor also)
in sta and adhoc modes; this should've been done forever ago as most all
drivers use this hook to set per-station transmit parameters such as for
tx rate control
o adjust drivers to remove explicit calls to the driver newassoc method
a) Need for EEOR mode to take the min of the socket buffer size and the
add more threshold, otherwise if you are so silly as to set a send
buf size less than the add-more you could block forever in eeor mode.
b) We were incorrectly using the sysctl vs the calculated value. This
causes us to block forever if the addmore theshold is larger than
then the socket buffer size.
- If we send EXACTLY the size left in the send buffer
and then send again, we end up with exactly 0 bytes and
don't hit the pre-block code to wait for more space.
- If we fall into the loop with our max_len == 0 (the bug
above) we then call in to copy out the data, setup the length
of the waiting to transmit data to 0 and call the mbuf copy routine
which 0 indicates copy all the data to the mbuf chain.. which it
does. This then leaves a "stuck" message on the stream queue with
its size exactly 0 bytes but all the data there and thus nothing
left in the uio structure. We then reach a stuck forever state
never being able to send data.
control logic and policy registration remaining in that file, and access
control checks broken out into other files by class of check.
Obtained from: TrustedBSD Project
The cn_unit and cn_tp fields don't seem to be used anywhere. Some
drivers set them, while others don't. Just remove them, in an attempt to
make our consdev code a little easier to understand.
certain ATA-6 drives including CF cards.
The IDE geometry of the PC98 is calculated from the drive capacity.
In addition to the algorithm in NEC BIOS, a variety of algorithms are
provided by 3'rd party boards and BIOS hacks. This change has
implemented the three algorithms: IDE BIOS compatible mode, SCSI BIOS
compatible mode and same way as the previous version. The tunable
machdep.ad_geom_method selects the algorithm.
I have been using this change for a year with CF cards.
Reminded by: nyan
Due to the nature of the beast it causes lot of unproductive overhead. This
is especially bad when running SMP kernel on VMWare with several virtual
processors - idle FreeBSD guest with SMP kernel takes 150% host CPU time on my
dual-core MacBook Pro when I am enabling two virtual CPUs, making even host
not very usable. Detect when we are running in the sandbox and reduce HZ
to 10 (can be adjusted via VM_HZ in the kernel config) in such cases. This
brings host CPU usage of idle FreeBSD/SMP on two virtual processors down
to 10%.
Detect most popular VM platforms out there - VMWare, Parallels, VirtualBox
and VirtualPC.
MFC after: 2 weeks
to set the initial PIO mode instead of assuming PIO4. There are still a few
nagging issues:
- There are some problems with 64 K DMA transfers waiting on lower level
changes.
- ATAPI DMA is broken on Marcel's Mac Mini because we need an ATA SELECT hook
propagated up to individual drivers for hardware without timing registers for
each ATA channel.
fragment reassembly queues.
This allows policies to label reassembly queues, perform access
control checks when matching fragments to a queue, update a queue
label when fragments are matched, and label the resulting
reassembled datagram.
Obtained from: TrustedBSD Project
sooner to decomplicate locking and eliminate the need for a rather
chatty comment about why we have to handle the global lock in a
special way for the benefit of ipfw and pf cred rules.
MFC after: 3 days
(unless explicitly locked to mode 11b) so when we join the bss the
channel attached to the scan cache entry may need to be demoted.
o demote to 11b if the ap is advertising 11b rates
o skip the ap if it's 11b but we're locked to 11g (could consider this
advisory but for now treat it as mandatory)
o handle an odd edge case, if there is a fixed transmit rate for 11g
then the rate check against the 11b ap will fail, try to demote to
11b and retry the rate check
Reviewed by: sephe, thompsa
G3 as well as the internal ADB keyboard and mice in PowerBooks and iBooks. This
also brings in Mac GPIO support, for which we should eventually have a better
interface.
Obtained from: NetBSD (CUDA and PMU drivers)
- Consistently add parentheses to return statements.
- Use NULL instead of 0 when comparing pointers, also avoiding
unnecessary casts.
- Do not use pointers as booleans.
Reviewed by: rwatson (earlier version)
MFC after: 2 months
the net80211 layer has complete control over the handling of mgt frames
(in particular, the ac, tx rate, and retry count); this also allows us
to purge the M_LINK0 flag that was attached to mbufs to mark them as
needing encryption for shared key auth
o change ieee80211_send_setup to take a tid parameter so it can be used
to setup QoS frames
o correct BAR frame construction for AMPDU
o retransmit BAR frames until ACK'd or timeout (use tunables to
control behaviour, default is very aggressive)
o defer seq# update until BAR frame is ACK'd
o add BAR response handling callback for driver to interpose and
push new state to device or push pending aggregates
While here also:
o add backpointer to node in the per-tid tx aggregation data structure
o move ampdu tx state setup/teardown work to separate functions
o yank useless code for setting fixed rate through media opts: this
mechanism didn't scale to HT rates and couldn't handle multiple bands;
fixed tx rates are set with the IEEE80211_IOC_TXPARAMS ioctl
are possibly still being created. The d_secperunit field
contains the number of sectors of the disk and not of the
slice/partition to which the disklabel applies.
Rather than reject the disklabel, we now silently adjust
the field. Existing code, like bslabel(8), does not seem
to check the label that extensively and seems to adjust
fields as a side-effect as well.
In other words, it's not that important apparently, so
gpart should not be too strict about it.
Reported by: nyan@
Reported by: Andriy Gapon <avg@icyb.net.ua>
Olaf Kirch noticed that the i915_set_status_page() function of the i915
kernel driver calls ioremap with an address offset that is supplied by
userspace via ioctl. The function zeroes the mapped memory via memset
and tells the hardware about the address. Turns out that access to that
ioctl is not restricted to root so users could probably exploit that to
do nasty things. We haven't tried to write actual exploit code though.
It only affects the Intel G33 series and newer.
Approved by: bz (secteam)
Obtained from: Intel drm repo
Security: CVE-2008-3831
Memory Interface (CFI). The flash memory can be read and written
to through /dev/cfi# and an ioctl() exists so processes can read
the query information.
The driver supports the AMD and Intel command set, though only
the AMD command has been tested.
Obtained from: Juniper Networks, Inc.
established a valid link or not.
In rl_start_locked, don't try to send packets unless we have valid
link. While I'm here add a check that verifies whether driver can
accept Tx requests by inspecting IFF_DRV_OACTIVE/IFF_DRV_RUNNING
flag.
- The hardware does not support DAC so limit DMA address space to
4GB.
- Removed BUS_DMA_ALLOC_NOW flag.
- Created separated Tx buffer and Rx buffer DMA tags. Previously
it used to single DMA tag and it was not possible to specify
different DMA restrictions.
- Apply 4 bytes alignment limitation of Tx buffer.
- Apply 8 bytes alignment limitation of Rx buffer.
- Tx side bus_dmamap_load_mbuf_sg(9) support.
- Preallocate Tx DMA maps as creating DMA maps take very long time
on architectures that require real DMA maps.
- Adjust guard buffer size to 1522 + 8 as it should include VLAN
and additional reserved bytes in Rx buffer.
- Plug memory leak in device detach. Previously wrong buffer
address was used to free allocated memory.
- Added rl_list_rx_init() to clear Rx buffer and cleared the
buffer.
- Don't destroy DMA maps in rl_txeof() as the DMA map should be
reused. There is no reason to destroy/recreate the DMA maps in
this driver.
- Removed rl_dma_map_rxbuf()/rl_dma_map_txbuf() callbacks.
- The hardware does not support descriptor based DMA on Tx side
and the Tx buffer address should be aligned on 4 bytes boundary
as well as manual padding for short frames. Because of this
hardware limitation rl(4) always used to invoke m_defrag(9) to
get a 4 bytes aligned single buffer. However m_defrag(9) takes
a lot of CPU cycles on slow machines and not all packets need
the help of m_defrag(9). Armed with the information, don't
invoke m_defrag(9) if the following conditions are true.
1. Buffer is not fragmented.
2. Buffer is aligned on 4 bytes boundary.
3. Manual padding is not necessary.
4. Or padding is necessary but upper stack passed a writable
buffer and the space needed for padding is satisfied.
This change combined with preallocated DMA maps greatly
increased Tx performance of driver on sparc64.
- Moved bus_dmamap_sync(9) in rl_start_locked() to rl_encap() and
corrected memory synchronization operation specifier of
bus_dmamap_sync(9).
- Removed bus_dmamap_unload(9) in rl_stop(). There is no need to
reload/unload Rx buffer as rl(4) always have to copy from the
buffer. It just needs proper bus_dmamap_sync(9) calls before
copying the received frame.
With this change rl(4) should work on systems with more than 4GB
memory.
PR: kern/128143
with several points unappropriate for the present parser. This patch
disables input-to-output analog monitoring but instead fixes recording.
Tested by Tobias Grosser on ThinkPad T61p.
might make Qualcomm and Option cards (which have all endpoints in 1
interface) work.
- Change the USB buffer sizes to depend on the transfer speed. With UMTS
we use a buffer 384k / 1000 frames/sec * 50msecs =~ 15kB for example.
- Add a MODULE_VERSION statement
when thread is in kernel mode, it can cause dead loop, now unlock
process lock after acquired sleep queue lock and thread lock to
avoid the problem. This means TDF_NEEDSIGCHK and TDF_NEEDSUSPCHK must
be set with process lock and thread lock being hold at same time.
but I inadvertently overwrote the change when I synced to git. Commit
the fix in both places, so this doesn't happen again.
Approved by: jhb (mentor)
MFC after: 2 weeks
This update fixes a transmit bug in the multi-queue (MSI-X) firmware
which happens when RDMAs complete out of order, and provides
improved support for the new Myri10GE NIC models (10G-PCIE-8Bx)
Sponsored by: Myricom Inc.
MFC after:3 days
With our new TTY layer we use a two step device destruction procedure.
The TTY first gets abandoned by the device driver. When the TTY layer
notices all threads have left the TTY layer, it deallocates the TTY.
This means that the device unit number should not be reused before a
callback from the TTY layer to the device driver has been made. newbus
doesn't seem to support this concept (yet), so right now just add a
destructor with a big comment in it. It's not ideal, but at least it's
better than panicing.
Reported by: rnoland
unnecessary, the normal process lock and thread lock are enough. The
spin lock is still needed for process and thread exiting to mimic
single sched_lock.
machine arm
device mem
device uart_ns8250
options GEOM_BSD
options GEOM_MBR
Remove the first three from all kernel configuration files
(sometimes commented-out) and change geom_bsd and geom_mbr
from standard to optional.
machine arm
device mem
options GEOM_BSD
options GEOM_MBR
Remove the first two from all kernel configuration files and
change geom_bsd and geom_mbr from standard to optional.
rest in kern_getdirentries(). Use kern_getdirentries() to implement
freebsd32_getdirentries(). This fixes a bug where calls to getdirentries()
in 32-bit binaries would trash the 4 bytes after the 'long base' in
userland.
Submitted by: ups
MFC after: 1 week
