and exclusion patterns [1]
- Some improvements on the exiting code, like replacing memcpy with
strlcpy/strcpy
Approved by: delphij (mentor)
Pointed out by: bf [1], des [1]
or if forced mode is specified [1]
- While here, add some alternative names for the options and make then
case-insensitive
- Fix -q and -l behaviour [2]
- Some small changes to make the code easier to review
Submitted by: swell.k@gmail.com [1],
dougb [2]
Approved by: delphij (mentor)
- Explicitly pre-zero memory for fts_open parameters.
- Don't test against directory patterns when we are testing direct
leaf of current directory.
While I'm there plug a few of memory leaks.
- Fix two minor nits in manpage [2]
- style.Makefile(5)
Submitted by: pluknet <pluknet at gmail.com> [1],
Alex Kozlov <spam@rm-rf.kiev.ua> [2]
Reviewed by: delphij
Deliverables: Small and clean code (1,4 KSLOC vs GNU's 8,5 KSLOC),
lower memory usage than GNU grep, GNU compatibility,
BSD license.
TODO: Performance is somewhat behind GNU grep but it is only
significant for bigger searches. The reason is complex, the
most important factor is that GNU grep uses lots of
optimizations to improve the speed of the regex library.
First, we need a modern regex library (practically by adopting
TRE), add support for GNU-style non-standard regexes and then
reevalute the performance issues and look for bottlenecks. In
the meantime, for those, who need better performance, it is
possible to build GNU grep by setting WITH_GNU_GREP.
Approved by: delphij (mentor)
Obtained from: OpenBSD (http://www.openbsd.org/cgi-bin/cvsweb/src/usr.bin/grep/),
freegrep (http://github.com/howardjp/freegrep)
Sponsored by: Google SoC 2008
Portbuild tests run by: kris, pav, erwin
Acknowledgements to: fjoe (as SoC 2008 mentor),
everyone who helped in reviewing and testing
-fno-rtti. The clang libaries that really use exceptions and virtual
functions can enable LLVM_REQUIRES_EH and LLVM_REQUIRES_RTTI
respectively. This saves space on the resulting binaries and follows
what's being done upstream.
Submitted by: Dimitry Andric <dimitry at andric.com>
This commit merges the latest LLVM sources from the vendor space. It
also updates the build glue to match the new sources. Clang's version
number is changed to match LLVM's, which means /usr/include/clang/2.0
has been renamed to /usr/include/clang/2.8.
Obtained from: projects/clangbsd
default invokation):
- Right now if segments are not writable are not included. Remove this.
- Right now if a segment is mapped with NOCORE the check is not honoured.
Change this by checking the newly added flag, from libutil,
KVME_FLAG_NOCOREDUMP.
Besides that, add a new flag (-f) that forces a 'full' dump of all the
segments excluding just the malformed ones. This might be used very
carefully as, among the reported segments, there could be memory
mapped areas that could be vital to program execution.
Sponsored by: Sandvine Incorporated
Discussed with: kib
Reviewed by: emaste
Tested by: Sandvine Incorporated
MFC after: 2 weeks
the same fix present in NetBSD.
Note: the getopt man page contains more antique information like this.
An overhaul of the man page and/or sync with NetBSD would be the right
thing to do. But since this is out of the scope of the PR, I'll leave
it as it is for now.
PR: docs/133118
Submitted by: Oleg A. Mamontov (oleg at mamontov dot net)
Discussed with: jilles@
MFC after: 2 weeks
is still one issue on FreeBSD/arm (signed vs unsigned char) which prevents
actually bumping this to WARNS=6 - I'm still considering the correct
solution to this issue.
Tested by: make universe
to print the stats were using an uninitialised variable. [1]
Fix trasnfer statistics in the "receive file" case - the statistics struct
was being cleared both before and after the initial connect to the remote
server. As a result, the printed time and calculated bandwidth covers
the time to connect ad well as the time to transfer the file. This may
not be ideal, but now at least matches the "send file" case.
Found by: clang static analyser [1]
Reviewed by: imp
This switch makes it a lot easier to locate problem areas when a process
is threatening to consume all of your disk space.
PR: 144192
Submitted by: gk
MFC after: 3 weeks
of times the system was forced to sleep when requesting a new allocation.
Expand the debugger hook, db_show_uma, to display these results as well.
This has proven to be very useful in out of memory situations when
it is not known why systems have become sluggish or fail in odd ways.
Reviewed by: rwatson alc
Approved by: scottl (mentor) peter
Obtained from: Yahoo Inc.
report the compression ratio as 0% instead of displaying
nonsense triggered by numeric overflow. This is common
when dealing with uncompressed files when the I/O blocking
causes there to be small transient differences in the
accounting.
Thanks to: Boris Samorodov
This avoids errors or __DECONST() from places with higher WARNS levels.
Adjust a local cache variable in ipcs to const as well
to compile in the new world order.
Suggested by: jhb
Reviewed by: jhb, kib, brueffer (man)
There's a parsing error for fields where addresses are not separated by
space. This is often produced by MS Outlook, eg.:
Cc: <foo@bar.com>,"Mr Foo" <foo@baz.com>
The following line now splits into the right tokens:
Cc: f@b.com,z@y.de, <a@a.de>,<c@c.de>, "foo" <foo>,"bar" <bar>
PR: bin/131861
Submitted by: Pete French <petefrench at ticketswitch.com>
Tested by: Pete French
Reviewed by: mikeh
MFC after: 2 weeks
utilities and related support files for manual pages, which were previously
controlled by MAN. For POLA, the default depends on MAN, i.e., WITHOUT_MAN
implies WITHOUT_MAN_UTILS and WITH_MAN implies WITH_MAN_UTILS. This patch
is slightly improved by me from:
PR: misc/145212
ar(1)'s dependencies on compressor libraries -lz, -lbz2 and -llzma and
fixes building HEAD on some versions of FreeBSD[78]. Option -j and -z
is now accepted but ignored.
Compressed ar(1) archives are not useful without a ld(1) that can read
them. Also, the current ar(1) compression scheme prevents random
access of archive members and needs to be redesigned anyway.
Submitted by: kientzle (original patch)
Reviewed by: delphij
Discussed on: -current mailing list
bottom of the manpages and order them consistently.
GNU groff doesn't care about the ordering, and doesn't even mention
CAVEATS and SECURITY CONSIDERATIONS as common sections and where to put
them.
Found by: mdocml lint run
Reviewed by: ru
- Upper case the first character of an description
- Section headings do not need to be quoted. From OpenBSD's make.1, revision 1.81
- Plural of suffix is suffixes. From OpenBSD's make.1, revision 1.61
- s/seperating/separating/
PR: 135165
Submitted by: Alan R. S. Bueno <alan.bsd@gmail.com>
MFC after: 1 week
Adjust dependencies for programs using libarchive
Add xz and linkage against liblzma to rescue system
Approved by: kientzle, delphij (mentor)
MFC after: 2 weeks
This joint work of Dag-Erling Smørgrav and myself updates the
FFS quota system to support both traditional 32-bit and new 64-bit
quotas (for those of you who want to put 2+Tb quotas on your users).
By default quotas are not compiled into the kernel. To include them
in your kernel configuration you need to specify:
options QUOTA # Enable FFS quotas
If you are already running with the current 32-bit quotas, they
should continue to work just as they have in the past. If you
wish to convert to using 64-bit quotas, use `quotacheck -c 64';
if you wish to revert from 64-bit quotas back to 32-bit quotas,
use `quotacheck -c 32'.
There is a new library of functions to simplify the use of the
quota system, do `man quotafile' for details. If your application
is currently using the quotactl(2), it is highly recommended that
you convert your application to use the quotafile interface.
Note that existing binaries will continue to work.
Special thanks to John Kozubik of rsync.net for getting me
interested in pursuing 64-bit quota support and for funding
part of my development time on this project.
sigvec(2) references have been updated to sigaction(2), sigsetmask(2) and
sigblock(2) to sigprocmask(2), sigpause(2) to sigsuspend(2).
Some legacy man pages still refer to them, that is OK.
lot better than what's in the tree now. Edwin tested it at a prior
employer, but can't test it today. I've found that it works a lot
better with the various uboot versions that I've used in my embedded
work. Here's the pkg-descr from the port that describes the changes:
It all started when we got some new routers, which told me the
following when trying to upload configuration or download images
from it: The TFTP server doesn't support the blocksize option.
My curiousity was triggered, it took me some reading of RFCs and
other documentation to find out what was possible and what could
be done. Was plain TFTP very simple in its handshake, TFTP with
options was kind of messy because of its backwards capability: The
first packet returned could either be an acknowledgement of options,
or the first data packet.
Going through the source code of src/libexec/tftpd and going through
the code of src/usr.bin/tftp showed that there was a lot of duplicate
code, and the addition of options would only increase the amount
of duplicate code. After all, both the client and the server can
act as a sender and receiver.
At the end, it ended up with a nearly complete rewrite of the tftp
client and server. It has been tested against the following TFTP
clients and servers:
- Itself (yay!)
- The standard FreeBSD tftp client and server
- The Fedora Core 6 tftp client and server
- Cisco router tftp client
- Extreme Networks tftp client
It supports the following RFCs:
RFC1350 - THE TFTP PROTOCOL (REVISION 2)
RFC2347 - TFTP Option Extension
RFC2348 - TFTP Blocksize Option
RFC2349 - TFTP Timeout Interval and Transfer Size Options
RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability
Statement for the Trivial File Transfer Protocol (TFTP)
It supports the following unofficial TFTP Options as described at
http://www.compuphase.com/tftp.htm:
blksize2 - Block size restricted to powers of 2, excluding protocol headers
rollover - Block counter roll-over (roll back to zero or to one)
From the tftp program point of view the following things are changed:
- New commands: "blocksize", "blocksize2", "rollover" and "options"
- Development features: "debug" and "packetdrop"
If you try this tftp/tftpd implementation, please let me know if
it works (or doesn't work) and against which implementaion so I can
get a list of confirmed working systems.
Author: Edwin Groothuis <edwin@FreeBSD.org>
Spaces and various other characters in pathnames are not passed through
literally by xargs in its default mode. Instead, use find . -exec ... {} +
Although the -- argument is not strictly required here, add it anyway to
avoid surprises when modifying the code to find -f -somedir ...
MFC after: 1 week
This option checks for empty pathnames and components starting with '-'.
Our -p option also checks for the latter, which remains the case.
MFC after: 1 week
Because script(1) now reliably terminates when the TTY is closed, it may
be the case that the call to wait3() occurs just before the child
process exits. This causes error codes to be ignored.
Just change script(1) to use waitpid() instead of wait3(). This makes it
more portable and prevents the need for a loop, since waitpid() only
returns a specified process.
PR: bin/146189
Tested by: amdmi3@, older version
MFC after: 2 weeks
handler, as the latter is not guaranteed to be signal safe, and we
do not really care about flushing the stream during SIGINT.
Suggested by: Maxim Konovalov <maxim.konovalov gmail com>
MFC after: 13 days
These are specified by POSIX but are not special builtins, and therefore
need to be available via execve() and utilities like time, nohup, xargs.
(Note that hash was moved from the XSI option to the base in the 2008
standard.)
Like most of the POSIX "regular builtin commands", these need to be executed
in a shell environment for full functionality, although they may still be of
some use outside one.
Unlike the POSIX special and regular builtin commands, POSIX does not
require these to be found before a PATH search, although that could be an
oversight.
Like some of the utilities already provided by usr.bin/alias, these may lead
to confusing results when invoked from csh(1).
It seems that identifier "_t" is sometimes used as a variable name,
even in our tree. Not that I endorse that, but still it's better
to require at least one character before _t suffix to consider
an identifier to be a type name.
Reported by: Alex Vasylenko <lxv@omut.org>
MFC after: 1 week
Although groff_mdoc(7) gives another impression, this is the ordering
most widely used and also required by mdocml/mandoc.
Reviewed by: ru
Approved by: philip, ed (mentors)
* It is not extracted (because it is excluded)
* If it's not present in the archive, then an error is
reported (because the file was requested and not found)
* If it is present in the archive, no error is reported.
Previously, this would always report an error because the
exclusion prevented the entry from matching the inclusion.
Also, tar is now more reluctant to report unmatched inclusions.
Previously, "tar x file1 'file*'" against an archive that contained a
single entry "file1" would match file1 and then report an error for
the second pattern because it wasn't matched. It now considers both
inclusions to be matched and reports no error.
Bump the alignment to 16bytes because lint1 memory allocator is used for
objects that require 16bytes alignment on amd64 (ie. val_t). This makes
lint1 work when compiled with compiler(s) that use SSE for memcpy on amd64.
(e.g. clang).
Approved by: ed (mentor)
addresses (most of them apart from ::1): put a whitespace
between local and remote address:port pairs.
PR: bin/145194
Submitted by: Fedor Dikarev
MFC after: 2 weeks
- Remove the 3rd clause of the UC Berkeley copyrighted files.
- For the files added copyrighted by me, move the "All rights
reserved" to the next line.
- Repeating events which span multiple years (because of -A, -B or
just the three days before the end of the year).
- Support for lunar events (full moon, new moon) and solar events
(equinox and solstice, chinese new year). Because of this, the
options -U (UTC offset) and -l (longitude) are available to
compensate if reality doesn't match the calculated values.
MFC after: 1 month
Note that this is actually a no-op for most users, as this GNU
cpio was broken on -HEAD and 8-STABLE since last March until
the recent fix.
FreeBSD 8.0+ uses BSD cpio by default and the code is being
actively maintained.
Blessed by: kientzle
With hat: secteam
MFC after: 3 days
Using 'sysctl vfs' is not only ugly, but is also not reliable - not all
file system types create entries in vfs sysctl tree.
Reviewed by: imp
MFC after: 1 week
starting from netgraph import in 1999.
netstat(8) used pointer to node as node address, oops. That didn't
work, we need the node ID in brackets to successfully address a node.
We can't look into ng_node, due to inability to include netgraph/netgraph.h
in userland code. So let the node make a hint for a userland, storing
the node ID in its private data.
MFC after: 2 weeks
arguments makes sense anymore. For example, what would a combination
of -3 (show three months) and -y (show the whole year) do?
We will abort on these cases.
- Move the debug option -d to -H (from highlight), while -d is now
used for setting the day of "today" so that -y and friends can
be tested.
Close the file descriptor to the TTY. There is no reason why the parent
process should keep track of the descriptor. This ensures that the
application inside properly drains the TTY during exit(2).
Reported by: alfred
MFC after: 2 weeks
in the input data but fallback to "binary comparison" instead.
POSIX says: "The input files shall be text files", nothing more,
so the text file with illegal sequence is valid input.
BTW, GNU sort does not fails on EILSEQ too.
in the input data but fallback to "binary equal" check instead.
POSIX says: "The input file shall be a text file", nothing more,
so the text file with illegal sequence is valid input.
BTW, GNU sort does not fails on EILSEQ too.
2) Speedup input processing a bit in complex cases like skipping fields,
chars or ignore case.
3) Enforce the implied LINE_MAX limit (from POSIX definition of "text file"
and POSIX uniq(1) description).
snprintf(3) doesn't set errno in the tested cases.
- If the same argument reference (for example %1) was specified more than
once, the command didn't necessarily fit to the final command buffer. Fix
this using a dynamic sbuf buffer. Add a few regression tests for the case.
PR: bin/95079
No objections: freebsd-hackers
- Add -A option (months after this month).
- Add -B option (months before this month).
- Fix highlighting of today in year overview.
- Fix aligning of "foreign" characters.
MFC after: 2 weeks
query routines. This code is necessarily more fragile in the presence of
kernel changes than querying the kernel via sysctl (the default), but
useful when investigating crashes or live kernel state via firewire.
MFC after: 1 week
Sponsored by: Juniper Networks
Fix a long-standing cpp compatibility bug: The -DFOO argument
(without an explicit value) should define FOO to 1 not to the empty
string.
Add support for CRLF newlines, based on a suggestion from Mark Rushakoff.
Obtained from: http://dotat.at/prog/unifdef/
sockaddr structures. As such, we have top copy the data structure
into a local buffer before we can reference it, otherwise we have
unaligned references (these are fixed up automatically on some CPUs,
but not on others). We do this unconditionally to make the code
easier to read and understand.
Submitted by: Grzegorz Bernacki
about to be extracted already exists. The question, and interpretation
of the response is deliberately compatible with Info-Zip.
This change was originally obtained from NetBSD, but has three changes:
- better compatibility with Info-Zip in the handling of ^D
- Use getdelim() rather than getline()
- bug fix: != changed to == in the "file rename" code
I suspect the latter is also a bug in NetBSD, but I can't easily confirm
this.
PR: bin/143307
Reviewed by: rdivacky (change to unzip.c only)
Obtained from: NetBSD src/usr.bin/unzip/unzip.c 1.8
MFC after: 1 month
This structure is deprecated and only used by ftime(2), which is part of
libcompat. The second argument of get_date() is unused, which means we
can just remove it entirely.
ports tree extensively and it is probably a good idea to keep it
regardless of NO_MAIL setting.
Reported by: Alexander Best
Reviewed by: antoine
X-MFC-With: r203584
isolate common code used by tar and cpio (and useful to other
libarchive clients). The functions here are prefixed with
"lafe" (libarchive front-end) to indicate their use.
is sufficiently different that it was simpler to just put separate
reporting functions into read.c and write.c rather than try to have
a single all-purpose reporting function.
Switch to a custom function for converting int64_t to a string; in
the portable version, this saves a lot of configuration headaches
trying to decipher the platform printf().
use -b 2048 (1MiB block size). Setting the limit to 8192 should
allow some room for growth while still helping people who mistakenly
put in byte counts here instead of block counts.
The bc(1) program may need to deal with files when it's being run in
interactive mode, so we can not blindly use interactive mode (in turn
use libedit) but need to check if the input source is really the standard
input.
This commit should fix a regression where 'bc -l' would not parse the
mathlib.
Reported by: trasz
- Include a cpasswd script performing the same mechanisms as the cvpasswd
utility from CVSup.
PR: bin/114129
Submitted by: Petar Zhivkov Petrov <pesho.petrov -at- gmail.com>
MFC after: 1 month
Also, change the existing -vi behavior to send the filenames to
stderr rather than stdout, as GNU cpio does.
PR: bin/141175
Submitted by: Philip Kizer
MFC after: 14 days
revision 1.91
Fri Nov 7 01:01:46 2003 UTC by lukem
Add some subsections in the VARIABLE ASSIGNMENTS section.
In the "modifier description" list, show each modifier with the leading `:'.
Rationale: it's hard to search for modifiers without it, and we already do
the same thing in the -options and .makecommands lists. I now find it much
easier to find the description for a modifier in the man page.
Obtained from: NetBSD
kept for compatibility with 4.4BSD behavior.
- Sync SYNOPSIS with usage().
- Use an alternative way to represent short and long options which have
same semantics.
Reviewed by: gabor
compatibility level with the GNU counterparts and have shown to be mature
enough. For now, the GNU versions aren't removed from the tree, just detached
from the build.
Sponsored by: Google Summer of Code 2008
Portbuild run by: erwin
Approved by: delphij
I must have misread when I ported the original last(1) source code.
Instead of only processing the last 1024 entries, it reads them in in
chucks of 1024 entries at a time.
Unfortunately we cannot walk through the log file in reverse order,
which means we have to allocate a piece of memory to hold all the
entries. Call realloc() for each 128 entries we read.
Reported by: Andrzej Tobola <ato iem pw edu pl>
file can safely be the same as the input file. Idea from IRIX unifdef(1).
This version fixes a bug in the NetBSD unifdef which refuses to
write to a -o outfile which does not exist.
Obtained from: NetBSD
This utility allows users to convert their wtmp databases to the new
format. It makes no sense for users to keep their wtmp log files if they
are unable to view them.
It basically copies ut_line into ut_id as well. This makes it possible
for last(1) and ac(8) to match login records with their corresponding
logout record.
do for IPv4 addresses without having to explicetly specify that the
ARIN server should be used to get the initial information
PR: bin/128725
Submitted by: "Matt D. Harris" <mdh_lists@yahoo.com>
MFC after: 1 week
Let it print "-" when the TTY string is empty. In this case, it must
also make sure it doesn't match processes who also have no controlling
TTY. Otherwise it will print random kernel processes when trying to pick
the best matching process.
Eventually it should look at the value of ut_pid as well.
Because getutxent also matches the typical get*ent format of library
routines, I thought it would be a good idea to teach it how to read
utmpx databases. getent(1) just gives a raw dump, which is very useful
when debugging problems related to parsing/logging.
Basically there are three major things I changed about last(1):
- It should use ut_type instead of determining by hand what type of
record was given.
- It should now keep track of ut_id's instead of TTYs. This means the
ttylist has been renamed to the idlist, storing all the ut_id's it has
processed until the next reboot.
- I've removed the signal handler. Because our wtmp is rotated so often,
it makes little sense. Even on a simple piece of hardware it should be
capable of grinding through megabytes of logs in a second.
It was already ported to use libulog, which makes it simpler now. Be
sure to catch the error returned by setutxdb(). Otherwise it may perform
a lookup on the utx.active database.
- Make one-true-awk respect locale's collating order in [a-z]
bracket expressions, until a more complete fix (like handing
BREs) is ready.
- Don't require a space between -[fv] and its argument.
2) Deregister.
3) New style function definitions.
Some WARNS still remain here - some printf format warning on some
arches and the compiler can't see that a variable should always be
initialised.
are not used uninitialised.
2) Fix some constness problems.
3) Avoid a signedness problem by casting to size_t. If bn != stuff,
than stuff-1-bn should be > 0.
Do by specifying ".../" with '-m' or MAKESYSPATH (new) environment variable.
Reviewed by: <sjg@NetBSD.org>
Obtained from: NetBSD (+ embellishment by me, sent back to NetBSD)
Std 1003.1-2008. Both Linux and Solaris conforms to the new definitions,
so we better follow too (older glibc used old BSDish alphasort prototype
and corresponding type of the comparision function for scandir). While
there, change the definitions of the functions to ANSI C and fix several
style issues nearby.
Remove requirement for "sys/types.h" include for functions from manpage.
POSIX also requires that alphasort(3) sorts as if strcoll(3) was used,
but leave the strcmp(3) call in the function for now.
Adapt in-tree callers of scandir(3) to new declaration. The fact that
select_sections() from catman(1) could modify supplied struct dirent is
a bug.
PR: standards/142255
MFC after: 2 weeks
r195175. Remove all definitions, documentation, and usage.
fifo_misc.c:
Remove all kqueue tests as fifo_io.c performs all those that
would have remained.
Reviewed by: rwatson
MFC after: 3 weeks
X-MFC note: don't change vlan_link_state() function signature
I was considering committing all these patches one by one, but as
discussed with brooks@, there is no need to do this. If we ever
need/want to merge these changes back, it is still possible to do this
per application.
Unfortunately it also uses lastlog, which means we must resort to local
extensions of the utmpx-interface. Because the user name and TTY name
are now nul-terminated, there is no need to copy around strings as
often.
- Only set the fields in the ulog_utmpx structure that are valid for the
command in question. This means that strings like "shutdown" or "~"
are not visible to the user anymore.
- Rename UTXF_* to UTXI_*, indicating the indexation, instead of using
the `antique' filename. If we ever get rid of utmp, it makes little
sense calling it by its old name.
i386-fbsd.c. Add pipe(2) to syscall table to decode it's pointer
argument properly and re-add special handling for pipe(2) return value
to print_syscall_ret().
PR: bin/120870
Approved by: trasz (mentor)
- Prevent overflowing of the buffer length variable in getline() by
limiting its maximum value.
- Exit if reallocf(3) fails in getline(). Failure was silently
considered as end-of-file.
Reviewed by: ghelmer
Approved by: trasz (mentor)
