The trampoline code used for loading gzipped a.out kernels on arm was
removed in r350436. A portion of this code allowed for DDB to find the
symbol tables when booting without loader(8), and some of this was
untouched in the removal. Remove it now.
Differential Revision: https://reviews.freebsd.org/D24950
The ICMPv6 echo reply is constructed with the IPv6 header too close to
the beginning of a packet for an Ethernet header to be prepended, so we
end up with an mbuf containing just the Ethernet header. The GENET
controller doesn't seem to handle this, with or without transmit checksum
offload. At least until we have chip documentation, do a pullup to
satisfy the chip. Hopefully this can be fixed properly in the future.
Fix problem with ICMP echo replies: check only deferred data checksum
flags, and not the received checksum status bits, when checking whether
a packet has a deferred checksum; otherwise echo replies are corrupted
because the received checksum status bits are still present.
Fix some unhandled cases in packet shuffling for checksum offload.
Add minimal support for creating stage 2 IPA -> PA mappings. For this we
need to:
- Create a new vmid set to allocate a vmid for each Virtual Machine
- Add the missing stage 2 attributes
- Use these in pmap_enter to create a new mapping
- Handle stage 2 faults
The vmid set is based on the current asid set that was generalised in
r358328. It adds a function pointer for bhyve to use when the kernel needs
to reset the vmid set. This will need to call into EL2 and invalidate the
TLB.
The stage 2 attributes have been added. To simplify setting these fields
two new functions are added to get the memory type and protection fields.
These are slightly different on stage 1 and stage 2 tables. We then use
them in pmap_enter to set the new level 3 entry to be stored.
The D-cache on all entries is cleaned to the point of coherency. This is
to allow the data to be visible to the VM. To allow for userspace to load
code when creating a new executable entry an invalid entry is created. When
the VM tried to use it the I-cache is invalidated. As the D-cache has
already been cleaned this will ensure the I-cache is synchronised with the
D-cache.
When the hardware implements a VPIPT I-cache we need to either have the
correct VMID set or invalidate it from EL2. As the host kernel will have
the wrong VMID set we need to call into EL2 to clean it. For this a second
function pointer is added that is called when this invalidation is needed.
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D23875
The ice(4) driver is the driver for the Intel E8xx series Ethernet
controllers; currently with codenames Columbiaville and
Columbia Park.
These new controllers support 100G speeds, as well as introducing
more queues, better virtualization support, and more offload
capabilities. Future work will enable virtual functions (like
in ixl(4)) and the other functionality outlined above.
For full functionality, the kernel should be compiled with
"device ice_ddp" like in the amd64 NOTES file, and/or
ice_ddp_load="YES" should be added to /boot/loader.conf so that
the DDP package file included in this commit can be downloaded
to the adapter. Otherwise, the adapter will fall back to a single
queue mode with limited functionality.
A man page for this driver will be forthcoming.
MFC after: 1 month
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21959
This reapplies logical r360944 and r360946 (reverting r360955), with fixed
copystr() stand-in replacement macro. Eventually the goal is to convert
consumers and kill the macro, but for a first step it helps if the macro is
correct.
Prior commit message:
Unlike the other copy*() functions, it does not serve to copy from one
address space to another or protect against potential faults. It's just
an older incarnation of the now-more-common strlcpy().
Add a coccinelle script to tools/ which can be used to mechanically
convert existing instances where replacement with strlcpy is trivial.
In the two cases which matched, fuse_vfsops.c and union_vfsops.c, the
code was further refactored manually to simplify.
Replace the declaration of copystr() in systm.h with a small macro
wrapper around strlcpy (with correction from brooks@ -- thanks).
Remove N redundant MI implementations of copystr. For MIPS, this
entailed inlining the assembler copystr into the only consumer,
copyinstr, and making the latter a leaf function.
Reviewed by: jhb (earlier version)
Discussed with: brooks (thanks!)
Differential Revision: https://reviews.freebsd.org/D24672
NXP LS1046A contains I2C controller compatible with Vybrid VF610.
Existing Vybrid MVF600 driver can be used to support it. For that purpose
declare driver as ofw_iicbus and add methods associated with ofw_iicbus.
For VF610 add dynamic clock prescaler calculation using clock information
from clock driver and clock frequency requested in device tree.
On the occasion add detach function and add additional error handling
in i2c_attach function.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D24361
This patch adds a GPIO controller support targeted for NXP LS1046A
SoC. The driver implements the following features:
* setting direction of each pin (IN or OUT)
* setting the mode of output pins (PUSHPULL or OPENDRAIN)
* setting the state of each output pin (1 or 0)
* reading the state of each input pin (1 or 0)
Submitted by: Kamil Koczurek <kek@semihalf.com>
Dawid Gorecki <dgr@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D24353
Driver provides probe and attach functions for LS1046A clockgen and passes
configuration information to QorIQ clockgen class. It may be used as
a reference implementation for different QorIQ clockgen devices.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Reviewed by: mmel, manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D24352
This patch adds classes and functions that can be used with various NXP
QorIQ Layerscape SoCs.
As for the clock topology - there is single platform PLL, which supplies
clocks for the peripheral bus and additional PLLs for CPU cores. There
can be multiple core PLLs (For example - LS1046A has two PLLs - CGAPLL1
and CGAPLL2). Each PLL has fixed dividers on output. The core PLLs
are not accessible from dts.
This is a preparation patch for NXP LS1046A SoC support.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Reviewed by: mmel
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D24351
The DIC and IDC bits in the CTR_EL0 register signal to the kernel when it
can relax the instruction cache synchronisation operations. The IDC bit
means we can relax cleaning the data cache to the point of unification
while the DIC bit means we don't need to invalidate the instruction cache
for data coherence. In both cases an appropriate barrier is still needed.
For now only implement the case where both bits are set, as is the case
on the Neoverse-N1 as used in the Amazon AWS Graviton 2 CPU. Note that
this behaviour is a optional on the N1 so we may later need to implement
only one or the other bit being set.
There is a tunable to disable each flag on boot.
Testing on a 4 core Graviton 2 instance found a significant improvement
in sys and real time when running "make buildkernel -j4", with no
significant difference in user time.
Reviewed by: markj
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D24853
Previously we would create an isrc for each MSI/MSI-X interrupt. This
causes issues for other interrupt sources in the system, e.g. a GPIO
driver, as they may be unable to allocate interrupts. This works around
this by allocating the isrc only when needed.
Reported by: alisaidi@amazon.com
Reviewed by: mmel
Sponsored by: Innovaate UK
Differential Revision: https://reviews.freebsd.org/D24876
This function is responsible for setting pc_domain in each pcpu
structure. Call it from the main function that starts APs, rather than
a separate SYSINIT. This makes it easier to close the window where
UMA's per-CPU slab allocator may be called while pc_domain is
uninitialized. In particular, the allocator uses pc_domain to allocate
domain-local pages, so allocations before this point end up using domain
0 for everything.
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24757
Unlike the other copy*() functions, it does not serve to copy from one
address space to another or protect against potential faults. It's just
an older incarnation of the now-more-common strlcpy().
Add a coccinelle script to tools/ which can be used to mechanically
convert existing instances where replacement with strlcpy is trivial.
In the two cases which matched, fuse_vfsops.c and union_vfsops.c, the
code was further refactored manually to simplify.
Replace the declaration of copystr() in systm.h with a small macro
wrapper around strlcpy.
Remove N redundant MI implementations of copystr. For MIPS, this
entailed inlining the assembler copystr into the only consumer,
copyinstr, and making the latter a leaf function.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D24672
locore constructs an L2 page mapping the kernel and preloaded data
starting a KERNBASE (the same as VM_MIN_KERNEL_ADDRESS on arm64).
initarm() and pmap_bootstrap() use the preloaded metadata to
tell it where it can start allocating from.
pmap_bootstrap() currently iterates over the L2 page to find the last
valid entry, but doesn't do anything with the result. Remove the loop
and zap some now-unused local variables.
MFC after: 2 weeks
Sponsored by: Juniper Networks, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D24559
Don't set initial voltage for regulators having their voltage already
in allowed range. As side effect of this change, we don't try to set
initial voltage for fixed voltage regulators - these don't have impemented
voltage set method so their initialization has always failed.
MFC after: 3 weeks
- always initialize selector of voltage signaling standard.
Various versions of U-boot leaves voltage signaling standard settings
for PMUIO2 domain in different state. Always initialize it
into expected state.
- start the driver as early as possible, the IO domains should be
initialized before other drivers are attached.
- rename RK3399 register to its name founds in TRM.
This is the second part of fixes for serial port corruption observed after
DT 5.6 import.
Reviewed by: manu
MFC after: 1 week
Store the attached regulator in a tailq to later find them in ofw_map.
While here, do not attempt to attach a regulator without a name, a node
might exists but if it doesn't have a name the regulator is unused.
MFC after: 1 month
If pin is switched from fixed function to GPIO, it should have prepared
direction, pull-up/down and default value before function gets switched.
Otherwise we may produce unwanted glitch on output pin.
Right order of drive strength settings is questionable, but I think that
is slightly safer to do it also before function switch.
This fixes serial port corruption observed after DT 5.6 import.
MFC after: 1 week
For such mappings we need to dump 512 page table pages, not one, and
they need to be included in the pmap size recorded in the minidump
header.
MFC after: 2 weeks
Sponsored by: Juniper Networks, Klara Inc.
The comment referenced a non-existent function, and these minidump
implementations already buffer discontiguous physical data pages by
mapping them into a single VA range that gets passed to the dump device,
so there is no real advantage in batching calls to blk_write().
The RISC-V and MIPS minidump implementations still write a page at a
time and so would benefit from some form of batching.
MFC after: 2 weeks
Sponsored by: Juniper Networks, Klara Inc.
The TSADC familiy is a little bit more complex than V2 and V3.
Early revision do not use syscon and do not use qsel (RK3288).
Next revision still do not use syscon but uses qsel (RK3328).
Final revision use both.
Submitted by: peterj
MFC after: 1 month
Add driver for Broadcom "GENET" version 5, as found in BCM-2711 on
Raspberry Pi 4B. The driver is derived in part from the bcmgenet.c
driver in NetBSD, along with bcmgenetreg.h.
Reviewed by: manu
Obtained from: in part from NetBSD
Relnotes: yes, note addition
Differential Revision: https://reviews.freebsd.org/D24436
The arm_physmem interface found in arm's MD code provides a convenient
set of routines for adding/excluding physical memory regions and
initializing important kernel globals such as Maxmem, realmem,
phys_avail[], and dump_avail[]. It is especially convenient for FDT
systems, since we can use FDT parsing functions and pass the result
directly to one of these physmem routines. This interface is already in
use on arm and arm64, and can be used to simplify this early
initialization on RISC-V as well.
This requires only a couple trivial changes:
- Move arm_physmem_kernel_addr to arm/machdep.c. It is unused on arm64,
and manipulated entirely in arm MD code.
- Convert arm32_btop/arm64_btop to atop. This is equivalently defined
on all architectures.
- Drop the "arm" prefix.
Reviewed by: manu, emaste ("looks reasonable")
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24153
Use AUXARGS_ENTRY_PTR to export these pointers. This is a followup to
r359987 and r359988.
Reviewed by: jhb
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24446
Copy the CP, PTRIN, etc macros from freebsd32.h into a sys/abi_compat.h
and replace existing definitation with includes where required. This
eliminates duplicate code and allows Linux and FreeBSD compatability
headers to be included in the same files.
Input from: cem, jhb
Obtained from: CheriBSD
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24275
Modern debuggers and process tracers use ptrace() rather than procfs
for debugging. ptrace() has a supserset of functionality available
via procfs and new debugging features are only added to ptrace().
While the two debugging services share some fields in struct proc,
they each use dedicated fields and separate code. This results in
extra complexity to support a feature that hasn't been enabled in the
default install for several years.
PR: 244939 (exp-run)
Reviewed by: kib, mjg (earlier version)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D23837
The goal of this change is to make the atomic_load_acq_{8,16},
atomic_testandset{,_acq}_long, and atomic_testandclear_long primitives
available in MI-namespace.
The second goal is to get this draft out of my local tree, as anything that
requires a full tinderbox is a big burden out of tree. MD specifics can be
refined individually afterwards.
The generic implementations may not be ideal for your architecture; feel
free to implement better versions. If no subword_atomic definitions are
needed, the include can be removed from your arch's machine/atomic.h.
Generic definitions are guarded by defined macros of the same name. To
avoid picking up conflicting generic definitions, some macro defines are
added to various MD machine/atomic.h to register an existing implementation.
Include _atomic_subword.h in arm and arm64 machine/atomic.h.
For some odd reason, KCSAN only generates some versions of primitives.
Generate the _acq variants of atomic_load.*_8, atomic_load.*_16, and
atomic_testandset.*_long. There are other questionably disabled primitives,
but I didn't run into them, so I left them alone. KCSAN is only built for
amd64 in tinderbox for now.
Add atomic_subword implementations of atomic_load_acq_{8,16} implemented
using masking and atomic_load_acq_32.
Add generic atomic_subword implementations of atomic_testandset_long(),
atomic_testandclear_long(), and atomic_testandset_acq_long(), using
atomic_fcmpset_long() and atomic_fcmpset_acq_long().
On x86, add atomic_testandset_acq_long as an alias for
atomic_testandset_long.
Reviewed by: kevans, rlibby (previous versions both)
Differential Revision: https://reviews.freebsd.org/D22963
Instead, dynamically allocate a page for the boot stack of each AP when
starting them up, like we do on x86. This shrinks the bss by
MAXCPU*KSTACK_PAGES pages, which corresponds to 4MB on arm64 and 256KB
on riscv.
Duplicate the logic used on x86 to free the bootstacks, by using a
sysinit to wait for each AP to switch to a thread before freeing its
stack.
While here, mark some static MD variables as such.
Reviewed by: kib
MFC after: 1 month
Sponsored by: Juniper Networks, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D24158
When I implemented MD DYNAMIC parsing, I was originally passing a
linker_file_t so that the MD code could relocate pointers.
However, it turns out this isn't even filled in until later, so it was
always 0.
Just pass the load base (ef->address) directly, as that's really the only
thing we were interested in in the first place.
This fixes a crash on RB800 where it was trying to write to an unmapped
address when updating the GOT.
Reviewed by: jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D24105
- Add more registers needed by bhyve [1]
- Move EL2 registers from armreg.h to hypervisor.h
- Add the register name to hypervisor.h
Obtained from: https://github.com/FreeBSD-UPB/freebsd [1]
This allows us to call it on a per-CPU basis and to warn if the details
are different across CPUs.
While here read the L1 I-Cache type and store this for use later by pmap.
Sponsored by: Innovate UK
A hypervisor, e.g. bhyve, will need to know what exception levelthe kernel
was in when it started booting. If it was EL2 we can then enable said
hypervisor.
Store the boot exception level and allow the kernel to later query it.
Obtained from: https://github.com/FreeBSD-UPB/freebsd (earlier version)
Sponsored by: Innovate UK
sys/arm64/arm64/identcpu.c:1170:5: error: misleading indentation; statement is not part of the previous 'if' [-Werror,-Wmisleading-indentation]
break;
^
sys/arm64/arm64/identcpu.c:1168:4: note: previous statement is here
if (fv[j].desc[0] != '\0')
^
The break should be after the if statement, indented one level less.
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D23871
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
Add support for non-ID registers when printing CPU information. This is
used with the cache type register to print details of the cache on boot.
Sponsored by: Innovate UK
The requirements of an Address Space ID allocator and a Virtual Machine ID
allocator are similar. Generalise the former code so it can be used with
the latter.
Reviewed by: alc (previous version)
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D23831
On arm64 the stage 1 and stage 2 pte formats are similar enough we can
reuse the pmap code for both. As they are only similar and not identical
we need to know if we are managing stage 1 or stage 2 tables.
Add an enum to store this information and a check to make sure it is
set to stage 1 when we manage stage 1 pte fields.
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D23830
In preperation for adding bhyve support to arm64 we need to split the
stage 1 and stage 2 pte fields to allow future changes to create stage 2
page tables.
MFC after: 1 month
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D23669
In dbg_monitor_exit(), avoid setting the PSR_D bit if the process is
a 32bits binary. PSR_D is an aarch64-only flags, and for aarch32 processes,
it means "run in big endian".
This should make COMPAT_FREEBSD32 run much better on arm64.
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Approved by: kib (mentor, blanket)
Differential Revision: https://reviews.freebsd.org/D23635
If a regulator is already enabled, do not set its value to the minimum
supported on the board.
This fixes booting on rock64 where we set some regulator to the minimal value
while the IPs needs more based on what the bootloader configured.
MFC after: 1 week
Platform (N1SDP).
Neoverse N1 is a high-performance ARM microarchitecture designed
by the ARM Holdings for the server market.
The PCI part on N1SDP was shipped untested and suffers from some
integration issues.
For instance accessing to not existing BDFs causes System Error
(SError) exception. To mitigate this, the firmware scans the bus,
catches SErrors and creates a table with valid BDFs. That allows
us to filter-out accesses to invalid BDFs in this driver.
Also the root complex config space (BDF == 0) has an unusual
location in memory map, so remapping accesses to it is required.
Finally, the config space is restricted to 32-bit accesses only.
This was tested on the ARM boxes kindly provided by the ARM Ltd
to the DARPA CHERI Project.
In collaboration with: andrew
Reviewed by: andrew
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D23349
This reverts r177661. The change is no longer very useful since
out-of-tree KLDs will be built to target SMP kernels anyway. Moveover
it breaks the KBI in !SMP builds since cpuset_t's layout depends on the
value of MAXCPU, and several kernel interfaces, notably
smp_rendezvous_cpus(), take a cpuset_t as a parameter.
PR: 243711
Reviewed by: jhb, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23512
Submitted by: Bora Özarslan <borako.ozarslan@gmail.com>
Submitted by: Yang Wang <2333@outlook.jp>
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19917
When panicing because of an unhandled data abort from the kernel it is
useful to know the register state and faulting address to aid debugging.
Print these registers before calling panic.
Sponsored by: DARPA, AFRL
Once all CPUs are online, determine if they all support LSE atomics and
set lse_supported to indicate this. For now the atomic(9)
implementations are still always inlined, though it would be preferable
to create out-of-line functions to avoid text bloat. This was not done
here since big.little systems exist in which some CPUs implement LSE
while others do not, and ifunc resolution must occur well before this
scenario can be detected. It does seem unlikely that FreeBSD will
ever run on such platforms, however, so converting atomic(9) to use
ifuncs is probably a good next step.
Add a LSE_ATOMICS arm64 kernel configuration option to unconditionally
select LSE-based atomic(9) implementations when the target system is
known.
Reviewed by: andrew, kib
MFC after: 1 month
Sponsored by: The FreeBSD Foundation, Amazon (hardware)
Differential Revision: https://reviews.freebsd.org/D23325
These make use of the cas*, ld* and swp instructions added in ARMv8.1.
Testing shows them to be significantly more performant than LL/SC-based
implementations.
No functional change here since the wrappers still unconditionally
select the _llsc variants.
Reviewed by: andrew, kib
MFC after: 1 month
Submitted by: Ali Saidi <alisaidi@amazon.com> (original version)
Differential Revision: https://reviews.freebsd.org/D23324
Add a _llsc suffix for the existing LL/SC-based implementations and add
trivial wrappers. This is in preparation for supporting LSE-based
atomic(9) implementations.
No functional change intended.
Reviewed by: andrew, kib
MFC after: 1 month
Sponsored by: The FreeBSD Foundation, Amazon (hardware)
Differential Revision: https://reviews.freebsd.org/D23323
Parameterize the macros by type width as well as acq/rel semantics.
This makes modifying the implementations much less tedious and
error-prone and makes it easier to support alternate LSE-based
implementations. No functional change intended.
Reviewed by: andrew, kib
MFC after: 1 month
Sponsored by: The FreeBSD Foundation, Amazon (hardware)
Differential Revision: https://reviews.freebsd.org/D23322
In r357324 most of the use of gi_irq was moved to gi_lpi. Complete this
with the last few places we need the IRQ value and create gi_id for the
per-device value we need.
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
When there are multiple GICv3 ITS devices we don't know which vmem is for
which device. Use device_get_nameunit to get a per-device name.
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
This uses UMA to allocate space. It causes issues when there are multiple
ITS devices in the system where interrupts are not allocated from a low
address on some interrupt controllers. Disabling the quantum cache fixes
this on the Neoverse N1 SDP.
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
After r355784 the td_oncpu field is no longer synchronized by the thread
lock, so the stack capture interrupt cannot be delievered precisely.
Fix this using a loop which drops the thread lock and restarts if the
wrong thread was sampled from the stack capture interrupt handler.
Change the implementation to use a regular interrupt instead of an NMI.
Now that we drop the thread lock, there is no advantage to the latter.
Simplify the KPIs. Remove stack_save_td_running() and add a return
value to stack_save_td(). On platforms that do not support stack
capture of running threads, stack_save_td() returns EOPNOTSUPP. If the
target thread is running in user mode, stack_save_td() returns EBUSY.
Reviewed by: kib
Reported by: mjg, pho
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23355
The GICv3 Software Overview suggests when allocating a new MSI/MSI-X
interrupt we need to call MAPD followed by MAPTI. Unfortunately the code
would place a MOVI command between these. This is invalid as it needs
values set by the MAPTI to be present.
Re-order so we allocate a temporary CPU for the interrupt, then use the
MAPTI command to assign the MSI to it.
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
When there are multiple ITS devices in the system we would allocate a
configuration table for each, however only one table is needed as all the
ITS devices share this.
Allocate a table only when the global table is unset.
While here fix the type of this to be a pointer to a uint8_t array as the
entries are all 8 bits wide.
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
When mapping MSI/MSI-X interrupts throught he Arm IORT ACPI tables we may
need to ignore an interrupt controller even if it is within the bounds the
entry describes. When the SMMUv3 is not using GSIV (non-MSI/MSI-X)
interrupts we need to read the defined field. The Performance Monitoring
Counter Group always ignores the first table entry.
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
When using the processor ID value we mask off the low and high bits that
should be zero. Unfortunatly we don't shift the ID value so it won't be
affected. Add the shift when reading the ID as this will need to align
with the address based target value.
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Doing so can cause deadlocks or panics during boot, if an interrupt
handler accesses uninitialized per-CPU scheduler structures. This seems
to occur frequently when running under QEMU or AWS. The idle threads
are set up to release a spinlock section and enable interrupts in
fork_exit(), so there is no need to enable interrupts earlier.
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23328
Static relocations for the immediate operand of a branch instruction
must be applied.
In a patch which implements LSE-based atomic(9) operations using ifuncs,
-zifunc-noplt reduces system CPU usage during a buildkernel by several
percent.
Also fix elf_reloc_internal() to return an error if symbol lookup fails.
Reviewed by: andrew
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17392
This method will set the desired voltaged based on values in the DTS.
It will not enable the regulator, this is the job of either a consumer
or regnode_set_constraint SYSINIT if the regulator is boot_on or always_on.
Reviewed by: mmel
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D23216
r355473 vastly improved the readability and cleanliness of these Makefiles.
Every single one of them follows the same pattern and duplicates the exact
same logic.
Now that we have GENERATED/SRCS, split SRCS up into the two parameters we'll
use for ${MAKESYSCALLS} rather than assuming a specific ordering of SRCS and
include a common sysent.mk to handle the rest. This makes it less tedious to
make sweeping changes.
Some default values are provided for GENERATED/SYSENT_*; almost all of these
just use a 'syscalls.master' and 'syscalls.conf' in cwd, and they all use
effectively the same filenames with an arbitrary prefix. Most ABIs will be
able to get away with just setting GENERATED_PREFIX and including
^/sys/conf/sysent.mk, while others only need light additions. kern/Makefile
is the notable exception, as it doesn't take a SYSENT_CONF and the generated
files are spread out between ^/sys/kern and ^/sys/sys, but it otherwise fits
the pattern enough to use the common version.
Reviewed by: brooks, imp
Nice!: emaste
Differential Revision: https://reviews.freebsd.org/D23197
arm64 and riscv were only saving and restoring floating point
registers for sendsig() and sys_sigreturn(), but not for getcontext(),
setcontext(), and swapcontext().
While here, remove an always-false check for uap being NULL from
sys_sigreturn().
Reviewed by: br, mhorne
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23218
The gpio controller in rockchips SoC in a child of the pinctrl driver
and cannot control pullups and pulldowns.
Use the new fdt_pinctrl interface for accessing pin capabilities and
setting them.
We can now report that every pins is capable of being IN or OUT function
and PULLUP PULLDOWN.
If the pin isn't in gpio mode no changes will be allowed.
Reviewed by: ganbold (previous version)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D22849
When either makesyscalls.lua or syscalls.master changes, all of the
${GENERATED} targets are now out-of-date. With make jobs > 1, this means we
will run the makesyscalls script in parallel for the same ABI, generating
the same set of output files.
Prior to r356603 , there is a large window for interlacing output for some
of the generated files that we were generating in-place rather than staging
in a temp dir. After that, we still should't need to run the script more
than once per-ABI as the first invocation should update all of them. Add
.ORDER to do so cleanly.
Reviewed by: brooks
Discussed with: sjg
Differential Revision: https://reviews.freebsd.org/D23099
These will reportedly be used in future uma changes.
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D23019
The two switch regulator are always 3.0V.
Add a special case in get_voltage that if min=max we directly
return the value without calculating it.
Reviewed by: mmel
Differential Revision: https://reviews.freebsd.org/D23004
- Add all the Cortex-A CPU ID register values I can find.
- Add the Neoverse-N1 ID regiser value [1]
- Sort macros by register value.
PR: 243065
Submitted by: Ali Saidi <alisaidi AT amazon.com> [1]
Sponsored by: DARPA, AFRL (other than [1])
vm.kvm_size and vm.kvm_free are read only and marked as MPSAFE on i386
already. Mark them as that on amd64 and arm64 too to avoid locking Giant.
Reviewed by: kib (mentor)
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D23039
mapping to the old read-only page with a mapping to the new read-write page.
To destroy the old mapping, pmap_enter() must destroy its page table and PV
entries and invalidate its TLB entry. This change simply invalidates that
TLB entry a little earlier, specifically, on amd64 and arm64, before the PV
list lock is held.
Reviewed by: kib, markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23027
syscall is to query the CPU number and the NUMA domain the calling
thread is currently running on. The third argument is ignored.
It doesn't do anything regarding scheduling - it's literally
just a way to query the current state, without any guarantees
you won't get rescheduled an opcode later.
This unbreaks Java from CentOS 8
(java-11-openjdk-11.0.5.10-0.el8_0.x86_64).
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22972
entry's access flag and dirty state, and enable this feature when it's
available.
Ensure that we don't overlook a dirty state update that is concurrent
with a call to pmap_enter(). (Previously, all dirty state updates would
have occurred with the containing pmap's lock held, so a page table entry's
dirty state could not have changed while pmap_enter() held that same lock.)
Reviewed by: andrew, markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22907
copy_file_range(2) is implemented natively since r350315, make it available
for Linux binaries too.
Reviewed by: kib (mentor), trasz (previous version)
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D22959
This driver configure the registers in the GRF according to the value
of the regulators for the platform.
Some IP can run with either 3.0V or 1.8V, if we don't configure them
correctly according to the external voltage used they will not work.
It's only done at boot time for now and might be needed at runtime for
IP like sdmmc.
Reviewed by: mmel
Tested On: RockPro64, Firefly-RK3399 (gonzo), AIO-3288 (mmel)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D22854
The RK808 driver was missing the LDO and switch regulators.
Add support for them.
Reviewed by: mmel
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D22852
Due to clang and LLD's tendency to use a PLT for builtins, and as they
don't have full support for EABI, we sometimes have to deal with a PLT in
.ko files in a clang-built kernel.
As such, augment the in-kernel linker to support jump table processing.
As there is no particular reason to support lazy binding in kernel modules,
only implement Secure-PLT immediate binding.
As part of these changes, add elf_cpu_parse_dynamic() to the MD API of the
in-kernel linker (except on platforms that use raw object files.)
The new function will allow MD code to act on MD tags in _DYNAMIC.
Use this new function in the PowerPC MD code to ensure BSS-PLT modules using
PLT will be rejected during insertion, and to poison the runtime resolver to
ensure we get a clear panic reason if a call is made to the resolver.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D22608
off the stack, initialized to default values, and then filled in with
driver-specific values, all without having to worry about the numerous
other fields in the tag. The resulting template is then passed into
busdma and the normal opaque tag object created. See the man page for
details on how to initialize a template.
Templates do not support tag filters. Filters have been broken for many
years, and only existed for an ancient make/model of hardware that had a
quirky DMA engine. Instead of breaking the ABI/API and changing the
arugment signature of bus_dma_tag_create() to remove the filter arguments,
templates allow us to ignore them, and also significantly reduce the
complexity of creating and managing tags.
Reviewed by: imp, kib
Differential Revision: https://reviews.freebsd.org/D22906
On arm64 the eret instruction is used to return from an exception handler.
Some implementations may speculate past this instruction into the next
function. As the user may control many registers in these functions add
a synchronisation barrier sequence after the eret instruction to stop these
CPUs from speculating out of the exception handler.
PR: 242676
Submitted by: Anthony Steinhauser <asteinhauser@google.com> (previous version)
MFC after: 1 week
incrementing (and decrementing) the ref_count on kernel page table pages.
They should not do this. Kernel page table pages are expected to have a
fixed ref_count. Address this problem by refactoring pmap_alloc{_l2,pde}()
and their callers. This also eliminates some duplicated code from the
callers.
Correctly implement PMAP_ENTER_NOREPLACE in pmap_enter_{l2,pde}() on kernel
mappings.
Reduce code duplication by defining a function, pmap_abort_ptp(), for
handling a common error case.
Handle a possible page table page leak in pmap_copy(). Suppose that we are
determining whether to copy a superpage mapping. If we abort because there
is already a mapping in the destination pmap at the current address, then
simply decrementing the page table page's ref_count is correct, because the
page table page must have a ref_count > 1. However, if we abort because we
failed to allocate a PV entry, this might be a just allocated page table
page that has a ref_count = 1, so we should call pmap_abort_ptp().
Simplify error handling in pmap_enter_quick_locked().
Reviewed by: kib, markj (an earlier)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22763
The maxpin counter starts at 0, fix one by one error.
This is still not totally correct for some banks in some SoC that have
fewer pins but this will be dealt with in another commit.
MFC after: 3 days
r351187 change the SYSCON_WRITE to SYSCON_MODIFY but didn't changed the
mask variable that used to hold the bitmask in the upper 16 bits of the
register that control which bits are changed. So we ended up clearing
bit from the upper 16bits half which are always 0 after a read.
Use the correct bit mask for bits that we want to clear.
MFC after: 3 days
fix an assert violation introduced in r355784. Without this spinlock_exit()
may see owepreempt and switch before reducing the spinlock count. amd64
had been optimized to do a single critical enter/exit regardless of the
number of spinlocks which avoided the problem and this optimization had
not been applied elsewhere.
Reported by: emaste
Suggested by: rlibby
Discussed with: jhb, rlibby
Tested by: manu (arm64)
than "/compat/linux". Useful when you have several compat directories
with different Linux versions and you don't want to clash with files
installed by linux-c7 packages.
Reviewed by: bcr (manpages)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22574
PHYS_TO_VM_PAGE() operation that always returns the same vm_page_t out of
the loop. (Since arm64 is configured as VM_PHYSSEG_SPARSE, the
implementation of PHYS_TO_VM_PAGE() is more costly than that of
VM_PHYSSEG_DENSE platforms, like amd64.)
MFC after: 1 week
Unfortunately, there are some limitations:
- memory aperture of his controller is only 16MiB, so it is nearly
unusable for graphic cards
- every attempt to generate type 1 config cycle always causes trap.
These config cycles are disabled now and we don't support cards
with PCIe switch.
- in some cases, attempt to do config cycle to (probably) not-yet ready
card also causes trap. This cannot be detected at runtime, but it seems
like very rare issue.
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D22724
over the usual fsync(2).
This silences some warnings when running "apt-get upgrade".
Reviewed by: brooks, emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22371
This code is non-obvious when reading for the first time. To help with
understanding of it add comments explaining what it's doing.
While here use macros from armreg.h rather than magic numbers.
Sponsored by: DARPA, AFRL
Only bank 0 and bank 2 are different than other rockchip SoC, fix this.
While here remove some debug printfs that where added in r355648
MFC after: 3 days
X-MFC-With: r355648
Those clocks are always enable by default and are not really explained
in the TRM but the reason we had them is that they have the periph clock
as a parent and those parent should never be disable which can happen
if we disable all the childs. The current childs are the sd/emmc/sdio clocks
so the board will hang if we disable them.
MFC after: 1 month
We used to include the hisi version if soc_hisi_hi6220 was present,
include the altera version if dwmmc_altera was present and include
the rockchip version if soc_rockchip_rk3328 was present.
Now every version have it's own device directive.
The rockchip version isn't named dwmmc_rockchip because all other
rockchip driver are named rk_XXX.
MFC after: 1 month
This is a 32-bit structure embedded in each vm_page, consisting mostly
of page queue state. The use of a structure makes it easy to store a
snapshot of a page's queue state in a stack variable and use cmpset
loops to update that state without requiring the page lock.
This change merely adds the structure and updates references to atomic
state fields. No functional change intended.
Reviewed by: alc, jeff, kib
Sponsored by: Netflix, Intel
Differential Revision: https://reviews.freebsd.org/D22650
Partially revert r354741 and r354754 and go back to allocating a
fixed-size chunk of stack space for the auxiliary vector. Keep
sv_copyout_auxargs but change it to accept the address at the end of
the environment vector as an input stack address and no longer
allocate room on the stack. It is now called at the end of
copyout_strings after the argv and environment vectors have been
copied out.
This should fix a regression in r354754 that broke the stack alignment
for newer Linux amd64 binaries (and probably broke Linux arm64 as
well).
Reviewed by: kib
Tested on: amd64 (native, linux64 (only linux-base-c7), and i386)
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22695
In some cases, like is locked bootstrap or device's inability to boot from
removable media, we cannot use standard boot sequence and is necessary to
boot kernel directly from U-Boot.
Discussed with: jhibbits
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D13861
Use the power of variable to avoid spelling out source and generated
files too many times. The previous Makefiles were hard to read, hard to
edit, and badly formatted.
Reviewed by: kevans, emaste
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22714
Interrupt based driver, implements SPI mode and clock configuration.
Tested on espressobin and SG-3200.
Sponsored by: Rubicon Communications, LLC (Netgate)
preempted after an "ic" or "tlbi" instruction but before it performed a
"dsb" instruction. The "ic" and "tlbi" instructions have unusual
synchronization requirements. If the old thread migrates to a new
processor, its completion of a "dsb" instruction on that new processor does
not guarantee that the "ic" or "tlbi" instructions performed on the old
processor have completed.
This issue is not restricted to the kernel. Since locore.S sets the UCI bit
in SCTLR, user-space programs can perform "ic ivau" instructions (as well as
some forms of the "dc" instruction).
Reviewed by: andrew, kib, markj, mmel
X-MFC with: r355145
Differential Revision: https://reviews.freebsd.org/D22622
This controller is a bit tricky as the STOP condition must be indicated in
the last tranferred byte, some devices will not like the repeated start
behavior of this controller. A proper fix to this issue is in the works.
This driver works in polling mode, can be used early in the boot (required
in some cases).
Tested on espressobin/SG-1100 and the SG-3200.
Obtained from: pfSense
Sponsored by: Rubicon Communications, LLC (Netgate)
o Remove All Rights Reserved from my notices
o imp@FreeBSD.org everywhere
o regularize punctiation, eliminate date ranges
o Make sure that it's clear that I don't claim All Rights reserved by listing
All Rights Reserved on same line as other copyright holders (but not
me). Other such holders are also listed last where it's clear.
- Use ustringp for the location of the argv and environment strings
and allow destp to travel further down the stack for the stackgap
and auxv regions.
- Update the Linux copyout_strings variants to move destp down the
stack as was done for the native ABIs in r263349.
- Stop allocating a space for a stack gap in the Linux ABIs. This
used to hold translated system call arguments, but hasn't been used
since r159992.
Reviewed by: kib
Tested on: md64 (amd64, i386, linux64), i386 (i386, linux)
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22501
RK3399 PLLs have three modes :
- Normal, where they behave normally and their freq is calculated based on
the registers values.
- Slow, where the PLL freq is 24Mhz (well, the external oscillator).
- Deep Slow, used for suspend where the freq is 32Khz.
We used to put every CPU related PLL in normal mode but it can cause problem
if the firmware didn't setup the clocks register correctly.
And even if it did but left the pll in slow or deep slow mode that might be
because the PMIC suppling voltage for the CPU haven't been configured yet
and we cannot do that at this point.
So remove the ability to set PLLs to normal mode at boot to avoid any problems.
After discussing with mmel@, it was clear this is insufficient to address
all the needs. mmel@ will commit his original patch, from
https://reviews.freebsd.org/D13861, and the additions needed from r354714
will be made afterward.
Requested by: mmel
Sponsored by: Juniper Networks, Inc.
Remove the duplicate macros that defined a subset of the VM_MEMATTR values.
While here use VM_MEMATTR macros when filling in the MAIR register.
Reviewed by: alc, markj
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22241
processor in pmap_invalidate_{all,page,range}(). These functions are using
an instruction that broadcasts the TLB invalidation to every processor, so
even if a thread migrates in the middle of one of these functions every
processor will still perform the required TLB invalidations.
Reviewed by: andrew, markj
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D22502
- implement of all but mmc clocks. MMC clocks will be added later by own commit.
- use 'link' clock type for external clocks.
- use macros for initialization of structure's named members.
MFC after: 3 weeks
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D22441
This should have been done back when it was added, but it was not. It only
really adds an extra entry for memory mapping bits in bcm2835_vcbus.c, so
nothing too extensive yet.
Update the NetBSD Kernel Concurrency Sanitizer (KCSAN) runtime to work in
the FreeBSD kernel. It is a useful tool for finding data races between
threads executing on different CPUs.
This can be enabled by enabling KCSAN in the kernel config, or by using the
GENERIC-KCSAN amd64 kernel. It works on amd64 and arm64, however the later
needs a compiler change to allow -fsanitize=thread that KCSAN uses.
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22315
invalidation in reclaim_pv_chunk(). (2) Prevent an "invalid ASID" assertion
failure in reclaim_pv_chunk(). The detailed explanation for this change is
provided by r354792.
X-MFC with: r354792
