The types are for the byte offset and page index in vm object. They
are similar to off_t, which is defined as 64bit MI integer. Using MI
definitions will allow to provide consistent MD values of vm
object-related maximum sizes.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The switch to get_pcpu() in MI code seems to cause hangs on MIPS.
Back out until we can get a better idea of what's happening there.
Reported by: kan, lidl
atomic_fcmpset_*() is analogous to atomic_cmpset(), but saves off the
read value from the target memory location into the 'old' pointer.
Reviewed by: imp, brooks
Requested by: mjg
Differential Revision: https://reviews.freebsd.org/D9391
There was a single call to stacktrace() under an #ifdef DEBUG to obtain
a stack trace during a fault that resulted in a function pointer to a
printf function being passed to stacktrace_subr() in db_trace.c. The
kernel now has existing interfaces for obtaining a stack trace outside
of DDB (kdb_backtrace(), or the stack_*() API) that should be used instead.
Rather than fix the one call however, remove it since the kernel will
dump a trace anyway once it panics.
Make stacktrace_subr() static, remove the function pointer and change it
to use db_printf() explicitly.
Discussed with: kan
Sponsored by: DARPA / AFRL
Some MIPS revisions do implement uncached-accelerate caching
attribute, but place extra requirement on access, such as
partial-word or out-of-sequence writes potentially having an
“unpredictable” effects.
On platforms that have uncached-accelerate cache attribute, map it
to VM_MEMATTR_WRITE_COMBINING. Otherwise, leave write comining
undefined.
Reviewed by: adrian, jhb (glance)
Differential Revision: https://reviews.freebsd.org/D8894
Kernel stack overflows in MIPS call panic() directly from an assembly
handler after storing the interrupted context's registers in a
trapframe. Rather than inferring the location of ra, sp, and pc from
the instruction stream, recognize the pc of a kernel stack overflow
and pull the registers from the trapframe.
Sponsored by: DARPA / AFRL
Secondary data cache line size can be bigger than
primary data cache line size, so use biggest value
as a minimum alignment.
Submitted by: kan
Sponsored by: DARPA, AFRL
While there, make param.h guess proper MACHINE_ARCH on hardfloat targets
correctly as well, so tools like bmake can get their defaults right.
This does not help the kernel case, since we compile them with forced
-msoft-float and need to override an incorrect guess by param.h.
Reviewed by: br
Differential Revision: https://reviews.freebsd.org/D8574
Config7 contains useful fields, for instance, field AR indicating that the D-cache is configured to avoid cache aliases. This patch brings printing of config7 for MIPS 24K, 74K, 1004K.
Reviewed by: adrian
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D8514
Add missing fields ('sr' and 'mc_tls') to 'struct sigcontext'.
The kernel doesn't use 'struct sigcontext' but instead uses 'ucontext_t'
which includes 'mcontext_t' in 'struct sigframe' to build the signal frame.
As a result, this change is not an ABI change but simply making
'struct sigcontext' correct. Note that 'struct sigcontext' is only used
for "Traditional BSD style" signal handlers.
While here, rename the 'xxx' field to '__spare__' to match 'mcontext_t'.
Sponsored by: DARPA, AFRL
with no creative content. Include "lost" changes from git:
o Use /dev/efi instead of /dev/efidev
o Remove redundant NULL checks.
Submitted by: kib@, dim@, zbb@, emaste@
Move to a per-proc TLS offset rather than incorrectly keying off the
presense of freebsd32 compability in the kernel.
Reviewed by: adrian, sbruno
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D7843
This will be required for SMP support on MIPS Malta platform.
Reviewed by: adrian
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Differential Revision: https://reviews.freebsd.org/D7835
More changes to MIPS may be required, as commented in D7692, but this
revision aims to restore MIPS INTRNG functionality so we can move on
with working interrupts.
Reported by: yamori813@yahoo.co.jp
Tested by: mizhka (on BCM), sgalabov (on Mediatek)
Reviewed by: adrian, nwhitehorn (older version)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D7692
This work, originally from Stacey Son, uses the MIPS UserReg for
reading the TLS data, and will fall back to the normal syscall path
when it isn't supported.
This code dynamically patches cpu_switch() to bypass the UserReg
instruction so to avoid generating a machine exception.
Thanks to sson for the original work, and to Dan Nelson for
bringing it to date and testing it on MIPS32 with me.
Tested:
* mips64 (sson)
* mips74k (dnelson_1901@yahoo.com) - AR9344 SoC, UserReg support
* mips24k (adrian) - AR9331 SoC, no UserReg support
Obtained from: sson, dnelson_1901@yahoo.com
64-bit MIPS, use superpage rather than physical-segment constants, or
we may improperly fail to apply suitable alignment -- yet still allow
mmap() to appear to succeed.
Reviewed by: sson
MFC after: 1 week
Sponsored by: DARPA, AFRL
ucontext_t available. Our code even has XXX comment about this.
Add a bit of compliance by moving struct __ucontext definition into
sys/_ucontext.h and including it into signal.h and sys/ucontext.h.
Several machine/ucontext.h headers were changed to use namespace-safe
types (like uint64_t->__uint64_t) to not depend on sys/types.h.
struct __stack_t from sys/signal.h is made always visible in private
namespace to satisfy sys/_ucontext.h requirements.
Apparently mips _types.h pollutes global namespace with f_register_t
type definition. This commit does not try to fix the issue.
PR: 207079
Reported and tested by: Ting-Wei Lan <lantw44@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
This was originall done by kan@.
Submitted by: Stanislav Galabov <sgalabov@gmail.com>
Reviewed by: kan
Differential Revision: https://reviews.freebsd.org/D5184
This is a prelude to intr-ng support for MIPS boards that need it -
notably the CI20 port from kan@ that's upcoming, but also work that
Stanislav is doing for the Mediatek platforms.
This is the initial platform dependent bits in include/intr.h, some
#defines for the nexus code for the intrng initialisation/runtime
bits, some changed naming (which I'll fix later to be the same, much
like what I did for ARM intr-ng) in exception.S, and the first cut
at a PIC.
Stanislav and I refactored out the common code for intrng support,
so the mips intrng definitions are quite small (sys/mips/include/intr.h.)
This is all work done by kan@, which stanislav has been cherry picking
into common code for his mediatek chipset work.
Tested:
* Carambola2 - no regressions (not intr-ng though!)
Submitted by: Stanislav Galabov <sgalabov@gmail.com>
Reviewed by: kan (original author)
Differential Revision: https://reviews.freebsd.org/D5182
clearing hazards.
This revision makes currently known MIPS32 Release 2 and Release 3 CPUs use
the EHB instruction when clearing hazards. So far the MIPS 74K and MIPS1004K
(somewhat) were already using the EHB. Now we add more r2 and r3 CPUs to
this list.
Also, for the cases of MIPS coherent processing systems (currently 1004K,
1074K, interAptiv and proAptiv) - define proper CCA attributes.
Submitted by: Stanislav Galabov <sgalabov@gmail.com>
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D5078
This revision does the following renames:
CPU_MIPS24KC -> CPU_MIPS24K
CPU_MIPS74KC -> CPU_MIPS74K
CPU_MIPS1004KC -> CPU_MIPS1004K
It also adds the following new CPU_MIPSxxx options:
CPU_MIPS24KE, CPU_MIPS34K, CPU_MIPS1074K, CPU_INTERAPTIV, CPU_PROAPTIV
CPU_MIPSxxxxKC is limiting and possibly misleading as it implies the
MIPSxxxxK CPU has no FPU.
It would be better if the CPUs are named after their standard functionalities
only and the presence or absence of FPU can then be controlled via the
CPU_HAVEFPU option.
I will send out another dependent revision that moves MIPS 32 r2 and r3
CPUs to use the EHB instruction for clearing hazards instead of NOP/SSNOP.
Submitted by: Stanislav Galabov <sgalabov@gmail.com>
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D5077
is what includes machine/ofw_machdep.h. Don't declare OF_decode_addr();
it isn't implemented yet on mips and the declaration for it is about to
be commonized into openfirm.h.
address and use this mechanism when:
1. kmem_alloc_{attr,contig}() can't find suitable free pages in the physical
memory allocator's free page lists. This replaces the long-standing
approach of scanning the inactive and inactive queues, converting clean
pages into PG_CACHED pages and laundering dirty pages. In contrast, the
new mechanism does not use PG_CACHED pages nor does it trigger a large
number of I/O operations.
2. on 32-bit MIPS processors, uma_small_alloc() and the pmap can't find
free pages in the physical memory allocator's free page lists that are
covered by the direct map. Tested by: adrian
3. ttm_bo_global_init() and ttm_vm_page_alloc_dma32() can't find suitable
free pages in the physical memory allocator's free page lists.
In the coming months, I expect that this new mechanism will be applied in
other places. For example, balloon drivers should use relocation to
minimize fragmentation of the guest physical address space.
Make vm_phys_alloc_contig() a little smarter (and more efficient in some
cases). Specifically, use vm_phys_segs[] earlier to avoid scanning free
page lists that can't possibly contain suitable pages.
Reviewed by: kib, markj
Glanced at: jhb
Discussed with: jeff
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D4444
http://www.t-es-t.hu/download/mips/md00090c.pdf this is bit 3 of the
config0 word, not bit 2. This should fix virtually indexed caches
(relatively new in the MIPS world, so no current platforms used this
and current code just uses it as an optimization). It was causing
false positives on newer platforms that default to large values for
the kseg0 cache coherency attribute.
Submitted by: Stanislav Galabov
PR: 205249
When I ported this code from netbsd I was .. slightly mips74k greener.
I used writethrough because (a) it's what netbsd did, and (b) if I used
writethrough then things "didn't work."
Fast-forward a couple years, more MIPS hacking and a whole lot more
understanding of the bus APIs (the last few commits notwithstanding;
it's been a long week, ok?) and I have this working for arge,
argemdio, spi and ath. Hans has it working for USB. The ath barrier
code will come in a later commit.
This gets the routing throughput up from 220mbit -> 337mbit.
I'm sure the bridging throughput will be similarly improved.
Tested:
* QCA955x SoC, routing workload.
and implement support for VM_MEMATTR_UNCACHEABLE. This will be used in
upcoming changes to support BUS_DMA_COHERENT in bus_dmamem_alloc().
Reviewed by: adrian, imp
provide a semantic defined by the C11 fences with corresponding
memory_order.
atomic_thread_fence_acq() gives r | r, w, where r and w are read and
write accesses, and | denotes the fence itself.
atomic_thread_fence_rel() is r, w | w.
atomic_thread_fence_acq_rel() is the combination of the acquire and
release in single operation. Note that reads after the acq+rel fence
could be made visible before writes preceeding the fence.
atomic_thread_fence_seq_cst() orders all accesses before/after the
fence, and the fence itself is globally ordered against other
sequentially consistent atomic operations.
Reviewed by: alc
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
and export them to userland.
- Define __HAVE_REG32 on platforms that define a reg32 structure and check
for this in <sys/procfs.h> to control when to export prstatus32, etc.
- Add prstatus32_t and prpsinfo32_t typedefs for the 32-bit structures.
libbfd looks for these types, and having them fixes 'gcore' in gdb of a
32-bit process on a 64-bit platform.
- Use the structure definitions from <sys/procfs.h> in gcore's elf32 core
dump code instead of duplicating the definitions.
Differential Revision: https://reviews.freebsd.org/D2142
Reviewed by: kib, nathanw (powerpc bits)
MFC after: 1 week
