This is a simple ioctl and mmap API to issue SPI transactions from
userland. It's useful for simple devices (eg spi temperature sensors,
etc) for experimentation.
TODO:
* Write some documentation!
Submitted by: green
This patchset adds support to bhnd_chipc for sharing SYS_RES_MEMORY
resources with its children, allowing us to hang devices off of
bhnd_chipc that rely on access to a subset of the device register space
that bhnd_chipc itself must also allocate.
We could avoid most of this heavy lifting if RF_SHAREABLE+SYS_RES_MEMORY
wasn't limited to use with allocations at the same size/offset.
As a work-around, I implemented something similar to vga_pci.c, which
implements similar reference counting of of PCI BAR resources for its
children.
With these changes, chipc will use reference counting of SYS_RES_MEMORY
allocation/activation requests, to decide when to allocate/activate/
deactivate/release resources from the parent bhnd(4) bus.
The requesting child device is allocated a new resource from chipc's
rman, pointing to (possibly a subregion of) the refcounted bhnd resources
allocated by chipc.
Other resource types are just passed directly to the parent bhnd bus;
RF_SHAREABLE works just fine with IRQs.
I also lifted the SPROM device code out into a common driver, since this
now allows me to hang simple subclasses off of a common driver off of both
bhndb_pci and bhnd_chipc.
Tested:
* (landonf) Tested against BCM4331 and BCM4312, confirmed that SPROM still
attaches and can be queried.
Submitted by: Landon Fuller <landonf@landonf.org>
Reviewed by: mizkha@gmail.com
Differential Revision: https://reviews.freebsd.org/D6471
This adds a BHND_BUS_GET_ATTACH_TYPE(); the primary use-case is to let
chipc make a coarse-grained determination as to whether UART, SPI, etc
drivers ought to be attached, and on fullmac devices, whether a real
CPU driver ought to be skipped for the ARM core, etc.
Tested:
* BCM4331 (BHND)
* BCM4312 (SIBA)
Submitted by: Landon Fuller <landonf@landonf.org>
Differential Revision: https://reviews.freebsd.org/D6492
This is the same problem as r290629. With META_MODE we do not generate
.depend files, so there is no proper dependency to lookup. Guessed
dependencies must be used. If this proves to be a problem then we will
have to generate and use .depend files even with META_MODE.
Sponsored by: EMC / Isilon Storage Division
Add directory structure and fix dependencies to be able to
build and use Cavium VNIC driver as a module.
Reviewed by: zbb
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D6345
"iflib is a library to eliminate the need for frequently duplicated device
independent logic propagated (poorly) across many network drivers."
Participation is purely optional. The IFLIB kernel config option is
provided for drivers that want to transition between legacy and iflib
modes of operation. ixl and ixgbe driver conversions will be committed
shortly. We hope to see participation from the Broadcom and maybe
Chelsio drivers in the near future.
Submitted by: mmacy@nextbsd.org
Reviewed by: gallatin
Differential Revision: D5211
It has no counterpart among the other lock primitives and has been a
no-op for years. Mutex consistency checks are generally done whenver
INVARIANTS is enabled.
* The default kernel and options won't build the GPL PHY bits;
* bwn(4) defaults to building as a module anyway!;
* If BWN_GPL_PHY is specified in the config file, and you uncomment
the GPL PHY bits in the module Makefile, you'll get a working
N-PHY.
This is specifically designed to be obtuse for now, as I don't want
to flip it on by default. It's easy enough for people to flip on
and build, and it's a module so the default GENERIC kernel won't be
GPL tainted.
I'll have to add an actual HAL layer that allows the GPL PHY to be loaded
before if_bwn so it can be "magic", but that'll come later.
Tested:
* BCM4321 11abg NIC, STA mode
Now that we've got access to SPROM and can access board identification,
this implements all known remaining hardware work-arounds for the bhnd(4)
PCI and PCIe-G1 cores operating endpoint mode.
Additionally, this adds an initial set of skeleton PCIe-G2 hostb and pcib
drivers, required by fullmac and newer softmac devices.
Submitted by: Landon Fuller <landonf@landonf.org>
Differential Revision: https://reviews.freebsd.org/D6377
This patch fix trampoline build. inckern.S increases stack and calls _startC
of elf_trampoline, so inckern.S should be called before elf_trampoline. gcc4.2 puts
text (code) into image according to order of source files in this call, so order has changed.
In addition make will install trampoline kernel. It allows to use kernel for firmware build.
Submitted by: Michael Zhilin <mizhka@gmail.com>
Differential Revision: https://reviews.freebsd.org/D6242
There are 5 logging levels:
* ERROR
* WARN
* INFO
* DEBUG
* TRACE
There are 2 logging context:
* with
* without device
DEBUG and TRACE records are printed only if bootverbose.
Logging records are printed with source code line information if acceptable
logging level is DEBUG or TRACE.
Submitted by: Michael Zhilin <mizhka@gmail.com>
Differential Revision: https://reviews.freebsd.org/D6247
MSI or MSI-X interrupts, however this is enought to boot FreeBSD under the
ARM Foundation Model with a GICv3 interrupt controller.
Approved by: ABT Systems Ltd
Relnotes: yes
Sponsored by: The FreeBSD Foundation
updated, and until further testing can be done, this is disabled for now.
It is expected arm64 will switch to this interface, and the old interface
will be removed before 11.0 is released.
Obtained from: ABT Systems Ltd
Relnotes: yes
Sponsored by: The FreeBSD Foundation
interface with 5 methods to mirror the 5 MSI/MSI-X methods in the pcib
interface. The pcib driver will need to perform a device specific lookup
to find the MSI controller and pass this to intrng as the xref. Intrng
will finally find the controller and have it handle the requested operation.
Obtained from: ABT Systems Ltd
MFH: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5985
Currently, Application Processors (non-boot CPUs) are started by
MD code at SI_SUB_CPU, but they are kept waiting in a "pen" until
SI_SUB_SMP at which point they are released to run kernel threads.
SI_SUB_SMP is one of the last SYSINIT levels, so APs don't enter
the scheduler and start running threads until fairly late in the
boot.
This change moves SI_SUB_SMP up to just before software interrupt
threads are created allowing the APs to start executing kernel
threads much sooner (before any devices are probed). This allows
several initialization routines that need to perform initialization
on all CPUs to now perform that initialization in one step rather
than having to defer the AP initialization to a second SYSINIT run
at SI_SUB_SMP. It also permits all CPUs to be available for
handling interrupts before any devices are probed.
This last feature fixes a problem on with interrupt vector exhaustion.
Specifically, in the old model all device interrupts were routed
onto the boot CPU during boot. Later after the APs were released at
SI_SUB_SMP, interrupts were redistributed across all CPUs.
However, several drivers for multiqueue hardware allocate N interrupts
per CPU in the system. In a system with many CPUs, just a few drivers
doing this could exhaust the available pool of interrupt vectors on
the boot CPU as each driver was allocating N * mp_ncpu vectors on the
boot CPU. Now, drivers will allocate interrupts on their desired CPUs
during boot meaning that only N interrupts are allocated from the boot
CPU instead of N * mp_ncpu.
Some other bits of code can also be simplified as smp_started is
now true much earlier and will now always be true for these bits of
code. This removes the need to treat the single-CPU boot environment
as a special case.
As a transition aid, the new behavior is available under a new kernel
option (EARLY_AP_STARTUP). This will allow the option to be turned off
if need be during initial testing. I plan to enable this on x86 by
default in a followup commit in the next few days and to have all
platforms moved over before 11.0. Once the transition is complete,
the option will be removed along with the !EARLY_AP_STARTUP code.
These changes have only been tested on x86. Other platform maintainers
are encouraged to port their architectures over as well. The main
things to check for are any uses of smp_started in MD code that can be
simplified and SI_SUB_SMP SYSINITs in MD code that can be removed in
the EARLY_AP_STARTUP case (e.g. the interrupt shuffling).
PR: kern/199321
Reviewed by: markj, gnn, kib
Sponsored by: Netflix
These firmwares were obtained from the "Chelsio T5/T4 Unified Wire
v2.12.0.3 for Linux" release. Changes since 1.14.4.0 (which is the
firmware in -STABLE branches) are in the "Release Notes" accompanying
the Unified Wire release and are copy-pasted here as well.
22.1. T5 Firmware
+++++++++++++++++++++++++++++++++
Version : 1.15.37.0
Date : 04/27/2016
================================================================================
FIXES
-----
BASE:
- Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where the default ingress
queue was ignored.
- Fixed an issue where adapter failed to load fw by adjusting DRAM frequency.
- Fixed an issue in watchdog which was causing VM bring-up failure after reboot.
- Fixed 40G link failures with some switches when auto-negotiation enabled.
- Fixed to improve on link bring-up time.
- Per port buffer groups size doubled to improve performance.
- Fixed an issue where bogus d3hot bits were set causing traffic stall.
- Fixed an issue where sometimes adapter was not seen after reboot.
- Fixed an issue where iWARP was crashing in conjunction with traffic management.
- Fixed an issue where link failed to come up after removing twinax cable and
inserting optical module.
ETH
- Fixed a link flap issue on T580-CR.
OFLD
- Fixed a potential iSCSI data corruption issue by disabling RxFragEn flag.
FOiSCSI
- Fixed an issue in recovery path where connection was getting closed before
recovery processing was done.
- Fixed an issue in TCP port reuse.
- Fixed an issue in recovery path when large number (>64) of iSCSI connections
were in use.
- Returned ENETUNREACH if IP was not been provisioned yet and driver tried to
use given inerface.
- Fixed an issue where fw was sending ENETUNREACH event for normal tcp
disconnection.
DCBX
- Fixed an issue where iscsi tlv is sent incorrectly to host. (DCBX CEE)
- Fixed an issue where apply bit set for APP id was affecting the ETS and PFC
settings.(DCBX IEEE)
- Fixed an issue where app priority values are not handled correctly in fw.
(DCBX IEEE)
- Fixed an issue where enable/disable dcbx can cause crash. (DCBX CEE,DCBX IEEE)
FOFCoE
- Removed BB6 support.
ENHANCEMENTS
------------
BASE:
- Added new interface to program DCA settings in SGE contexts; allow 32-byte
IQE size
- Added PTP interface fw_ptp_ts to support PTP Frequeny and Offset adjustment.
- Added MPS raw interface.
ETH:
- New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx.
OFLD:
- WR opcode is returned to host in cqe error response.
22.2. T4 Firmware
+++++++++++++++++
Version : 1.15.37.0
Date : 04/27/2016
================================================================================
FIXES
-----
BASE:
- Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where default ingress queue
was ignored.
- Fixed an issue in watchdog which was causing VM bring-up failure after reboot.
- Per port buffer groups size doubled to improve performance.
- Fixed an issue where iWARP was crashing in conjunction with traffic management.
FOiSCSI:
- Fixed an issue in recovery path where connection was getting closed before
recovery processing was done.
- Fixed an issue in TCP port reuse.
- Fixed an issue in recovery path when large number (>64) of iSCSI connections
were in use.
- Returned ENETUNREACH if IP had not been provisioned yet and driver tried to
use given inerface.
DCBX
- Fixed an issue where iscsi tlv is sent incorrectly to host.(DCBX CEE)
- Fixed an issue where enable/disable dcbx can cause crash in firmware.(DCBX CEE)
FOiSCSI
- Fixes an issue where fw was sending ENETUNREACH event for normal tcp
disconnection.
FOFCoE
- Removed BB6 support.
ENHANCEMENTS
------------
BASE:
- Added MPS raw interface.
ETH:
- New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx.
================================================================================
Obtained from: Chelsio Communications
MFC after: 6 weeks
Relnotes: yes
Sponsored by: Chelsio Communications
gpiokey driver implements functional subset of gpiokeys device-tree bindings:
https://www.kernel.org/doc/Documentation/devicetree/bindings/input/gpio-keys.txt
It acts as a virtual keyboard, so keys are visible through kbdmux(4)
Driver maps linux scancodes for most common keys to FreeBSD scancodes and
also extends spec by introducing freebsd,code property to specify
FreeBSD-native scancodes.
Reviewed by: mmel, jmcneill
Differential Revision: https://reviews.freebsd.org/D6279
legacy siba sentry5 cpu glue.
The siba_cc code is the hard-coded chipcommon bits for the sentry s5,
which will eventually be replaced with the more flexible bhnd sipa/cc
code.
bwn, etc uses siba_bwn, which doesn't use siba or siba_cc to do anything.
Turns out that ye olde siba.c is /just/ the siba mips code (used by
the initial SENTRY5 port. However, I don't think it was ever
finished enough to be useful, and I do have this nagging feeling
that we'll eventually replace it with the bhnd code.
But, since bhnd(4) introduced siba.c too, we ended up with a
source file name clash, and that broke the SENTRY5 build.
It /looks/ like this is the only place siba.c / device siba is
used.
Trim the leading directory of a firmware source file from the resulting
target object file name so the object file is stored in the object
directory. Previously, using 'FIRMWS= /path/to/fw.bin:fw.bin' would
store the generated 'fw.bin.fwo' file in the /path/to directory. Now
it stores it in the object directory of the kernel module being built.
Reviewed by: bdrewery
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6285
This adds support for the NVRAM handling and the basic SPROM
hardware used on siba(4) and bcma(4) devices, including:
* SPROM directly attached to the PCI core, accessible via PCI configuration
space.
* SPROM attached to later ChipCommon cores.
* SPROM variables vended from the parent SoC bus (e.g. via a directly-attached
flash device).
Additional improvements to the NVRAM/SPROM interface will
be required, but this changeset stands alone as working
checkpoint.
Submitted by: Landon Fuller <landonf@landonf.org>
Reviewed by: Michael Zhilin <mizkha@gmail.com> (Broadcom MIPS support)
Differential Revision: https://reviews.freebsd.org/D6196
PCI-express HotPlug support is implemented via bits in the slot
registers of the PCI-express capability of the downstream port along
with an interrupt that triggers when bits in the slot status register
change.
This is implemented for FreeBSD by adding HotPlug support to the
PCI-PCI bridge driver which attaches to the virtual PCI-PCI bridges
representing downstream ports on HotPlug slots. The PCI-PCI bridge
driver registers an interrupt handler to receive HotPlug events. It
also uses the slot registers to determine the current HotPlug state
and drive an internal HotPlug state machine. For simplicty of
implementation, the PCI-PCI bridge device detaches and deletes the
child PCI device when a card is removed from a slot and creates and
attaches a PCI child device when a card is inserted into the slot.
The PCI-PCI bridge driver provides a bus_child_present which claims
that child devices are present on HotPlug-capable slots only when a
card is inserted. Rather than requiring a timeout in the RC for
config accesses to not-present children, the pcib_read/write_config
methods fail all requests when a card is not present (or not yet
ready).
These changes include support for various optional HotPlug
capabilities such as a power controller, mechanical latch,
electro-mechanical interlock, indicators, and an attention button.
It also includes support for devices which require waiting for
command completion events before initiating a subsequent HotPlug
command. However, it has only been tested on ExpressCard systems
which support surprise removal and have none of these optional
capabilities.
PCI-express HotPlug support is conditional on the PCI_HP option
which is enabled by default on arm64, x86, and powerpc.
Reviewed by: adrian, imp, vangyzen (older versions)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D6136
Clocks, GPIO, UART, SD card / eMMC, USB, watchdog, and ethernet are
supported. Note that the A83T contains two clusters of four Cortex-A7
CPUs, and only CPUs in first cluster are started for now.
Tested on a Sinovoip Banana Pi BPI-M3.
This is an initial work in progress to use the replacement bhnd
bus code for devices which support it.
* Add manpage updates for bhnd, bhndb, siba
* Add kernel options for bhnd, bhndbus, etc
* Add initial support in if_bwn_pci / if_bwn_mac for using bhnd
as the bus transport for suppoted NICs
* if_bwn_pci will eventually be the PCI bus glue to interface to bwn,
which will use the right backend bus to attach to, versus direct
nexus/bhnd attachments (as found in embedded broadcom devices.)
The PCI glue defaults to probing at a lower level than the bwn glue,
so bwn should still attach as per normal without a boot time tunable set.
It's also not fully fleshed out - the bwn probe/attach code needs to be
broken out into platform and bus specific things (just like ath, ath_pci,
ath_ahb) before we can shift the driver over to using this.
Tested:
* BCM4311, STA mode
* BCM4312, STA mode
Submitted by: Landon Fuller <landonf@landonf.org>
Differential Revision: https://reviews.freebsd.org/D6191
* Break out the 'g' phy code;
* Break out the debugging bits into a separate source file, since
some debugging prints are done in the phy code;
* Make some more chip methods in if_bwn.c public.
This brings the size of if_bwn.c down to 6,805 lines which is now
approaching managable.
This (and eventually migrating the other PHY code out) is in preparation
for adding the 11n PHY. No, the 11ac PHY (for the BCM4260 softmac part) isn't
yet open source, so we can't grow that. Yet.
This trims ~3,700 lines of code from if_bwn.c, bringing it down to a slightly
less crazy sounding 10,446 lines of code.
implementations. Early in the boot the kernel will use an approximate,
however after the timer has been probed it will switch to a more accurate
implementation.
Reviewed by: manu
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D5762
