d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
freebsd-skq/sys/arm/at91
History
ian d334c66268 MFC r294032: 
Fix the handling of the "PDC write transfer length" erratum for at91.  The
  problem affects revision 1xx hardware as well as later versions.  Also, the
  recommended workaround is to set the PDC count register for a 12-byte
  transfer when the actual size is less than that, but there is no need to
  extend or zero-out the data buffer, because the blklen register contains
  the real transfer size and only that many bytes will be transferred.

  Also add a sysctl to turn debugging printfs on or off on the fly.
2016-01-24 22:06:56 +00:00
..
at91_aic.c
MFC r271394, r271398:
2015-02-12 03:50:33 +00:00
at91_aicreg.h
…
at91_cfata.c
…
at91_gpio.h
MFC r260695, r260696, r260884, r260885, r260886, r260887
2014-05-14 20:31:54 +00:00
at91_machdep.c
MFC 265852: Map device memory using PTE_DEVICE rather than PTE_NOCACHE.
2014-05-18 00:32:35 +00:00
at91_mci.c
MFC r294032:
2016-01-24 22:06:56 +00:00
at91_mcireg.h
- Add support for MCI1 revision 2xx controllers and a work-around for their
2012-04-22 00:43:32 +00:00
at91_pdcreg.h
…
at91_pinctrl.c
MFC r270945:
2014-10-26 01:30:46 +00:00
at91_pio_sam9g20.h
…
at91_pio_sam9g45.h
Add support for the Atmel AT91SAM9G45 CPU.
2012-07-26 08:01:25 +00:00
at91_pio.c
MFC r270025:
2014-10-26 01:26:53 +00:00
at91_pioreg.h
MFC r258820: Add definitions for the PIO pins found on recent AT91 SoCs.
2013-12-14 01:14:38 +00:00
at91_piovar.h
MFC r270025:
2014-10-26 01:26:53 +00:00
at91_pit.c
MFC r261681, r261682, r261683, r261684, r261685, r261686, r261687, r261688,
2014-05-15 21:21:47 +00:00
at91_pitreg.h
at91pit->at91_pit for consistnecy with other drivers.
2012-07-11 17:11:54 +00:00
at91_pmc.c
MFC r261681, r261682, r261683, r261684, r261685, r261686, r261687, r261688,
2014-05-15 21:21:47 +00:00
at91_pmcreg.h
Add charge pump current register.
2012-08-10 04:47:20 +00:00
at91_pmcvar.h
Correct the PLLA setting functions and centralize.
2012-08-11 05:45:19 +00:00
at91_reset.S
Eliminate the AT91XXXX_BASE for each SoC. AT91_BASE is the right way
2012-07-10 02:14:50 +00:00
at91_rst.c
MFC r261681, r261682, r261683, r261684, r261685, r261686, r261687, r261688,
2014-05-15 21:21:47 +00:00
at91_rstreg.h
at91$DEV->at91_$DEV to match other Atmel drivers. Also, export
2012-07-11 17:11:07 +00:00
at91_rtc.c
Loop reading the RTC registers until the same values are obtained
2012-10-07 20:36:46 +00:00
at91_rtcreg.h
Use the RTC unit to get the time. This works on all known AT91SAM9*
2012-10-07 01:58:32 +00:00
at91_sdramc.c
MFC r262591, r262592, r262593, r262597, r262598, r262599, r262600, r262601,
2014-05-16 12:43:45 +00:00
at91_shdwc.c
MFC r262591, r262592, r262593, r262597, r262598, r262599, r262600, r262601,
2014-05-16 12:43:45 +00:00
at91_smc.c
MFC r260695, r260696, r260884, r260885, r260886, r260887
2014-05-14 20:31:54 +00:00
at91_smc.h
MFC r260695, r260696, r260884, r260885, r260886, r260887
2014-05-14 20:31:54 +00:00
at91_spi.c
MFC r261681, r261682, r261683, r261684, r261685, r261686, r261687, r261688,
2014-05-15 21:21:47 +00:00
at91_spireg.h
- Prepend the device description with "AT91" to reflect its nature. [1]
2012-06-03 00:54:10 +00:00
at91_ssc.c
Strip trailing whitespace before other changes.
2012-06-13 04:52:19 +00:00
at91_sscreg.h
…
at91_st.c
Make the SoC stuff a little more modular, and start to move away from
2012-07-11 20:17:14 +00:00
at91_streg.h
Make the SoC stuff a little more modular, and start to move away from
2012-07-11 20:17:14 +00:00
at91_tcb.c
MFC r262591, r262592, r262593, r262597, r262598, r262599, r262600, r262601,
2014-05-16 12:43:45 +00:00
at91_twi.c
MFC r261681, r261682, r261683, r261684, r261685, r261686, r261687, r261688,
2014-05-15 21:21:47 +00:00
at91_twiio.h
…
at91_twireg.h
Add support for the Atmel SAM9XE familiy of microcontrollers, which
2012-04-14 17:09:38 +00:00
at91_usartreg.h
…
at91_wdt.c
MFC r261681, r261682, r261683, r261684, r261685, r261686, r261687, r261688,
2014-05-15 21:21:47 +00:00
at91_wdtreg.h
Strip trailing whitespace before other changes.
2012-06-13 04:52:19 +00:00
at91.c
MFC r277454, r277460, r277465, r277466, r277467, r277469, r277470, r277471,
2015-02-13 22:32:02 +00:00
at91board.h
Create a generic way to support multiple boards within an
2012-07-07 05:02:39 +00:00
at91reg.h
The system IRQ is always IRQ 1. Make it so.
2012-07-10 02:39:03 +00:00
at91rm92reg.h
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
2014-05-15 02:41:23 +00:00
at91rm9200_devices.c
Fix a typo: the RXD0 pin is PA18, not PA19.
2013-03-29 18:06:54 +00:00
at91rm9200.c
MFC 257774, 256760, 262916, 262905, 262918, 262919, 262920, 262921, 262924,
2014-05-17 00:53:12 +00:00
at91rm9200var.h
Configure the peripheral pins for MCI devices. Eliminate the now-unused
2012-07-15 05:41:43 +00:00
at91sam9g20.c
MFC 257774, 256760, 262916, 262905, 262918, 262919, 262920, 262921, 262924,
2014-05-17 00:53:12 +00:00
at91sam9g20reg.h
MFC 257774, 256760, 262916, 262905, 262918, 262919, 262920, 262921, 262924,
2014-05-17 00:53:12 +00:00
at91sam9g45.c
MFC r260695, r260696, r260884, r260885, r260886, r260887
2014-05-14 20:31:54 +00:00
at91sam9g45reg.h
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
2014-05-15 02:41:23 +00:00
at91sam9x5.c
MFC 257774, 256760, 262916, 262905, 262918, 262919, 262920, 262921, 262924,
2014-05-17 00:53:12 +00:00
at91sam9x5reg.h
These files will support the whole at91sam9x5 family when done,
2012-07-30 21:30:43 +00:00
at91sam9260.c
MFC r260695, r260696, r260884, r260885, r260886, r260887
2014-05-14 20:31:54 +00:00
at91sam9260reg.h
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
2014-05-15 02:41:23 +00:00
at91soc.c
Make the SoC stuff a little more modular, and start to move away from
2012-07-11 20:17:14 +00:00
at91soc.h
Make the SoC stuff a little more modular, and start to move away from
2012-07-11 20:17:14 +00:00
at91var.h
MFC r260695, r260696, r260884, r260885, r260886, r260887
2014-05-14 20:31:54 +00:00
board_bwct.c
Configure the peripheral pins for MCI devices. Eliminate the now-unused
2012-07-15 05:41:43 +00:00
board_eb9200.c
MFC r261681, r261682, r261683, r261684, r261685, r261686, r261687, r261688,
2014-05-15 21:21:47 +00:00
board_ethernut5.c
uboot should be telling us it is an ETHERNUT5 for this board. Tag it
2012-07-14 06:00:37 +00:00
board_hl200.c
Configure the peripheral pins for MCI devices. Eliminate the now-unused
2012-07-15 05:41:43 +00:00
board_hl201.c
Create a generic way to support multiple boards within an
2012-07-07 05:02:39 +00:00
board_kb920x.c
Configure the peripheral pins for MCI devices. Eliminate the now-unused
2012-07-15 05:41:43 +00:00
board_qila9g20.c
Create a generic way to support multiple boards within an
2012-07-07 05:02:39 +00:00
board_sam9g20ek.c
Create a generic way to support multiple boards within an
2012-07-07 05:02:39 +00:00
board_sam9x25ek.c
Create a generic way to support multiple boards within an
2012-07-07 05:02:39 +00:00
board_sam9260ek.c
MFC r260886, r261165, r261171, r261172, r261214
2014-05-14 23:51:07 +00:00
board_sn9g45.c
Add new at91sam9g45 support and sn9g45 board to the ATMEL kernel.
2012-07-27 16:38:02 +00:00
board_tsc4370.c
Configure the peripheral pins for MCI devices. Eliminate the now-unused
2012-07-15 05:41:43 +00:00
files.at91
MFC r277454, r277460, r277465, r277466, r277467, r277469, r277470, r277471,
2015-02-13 22:32:02 +00:00
if_ate.c
MFC r261681, r261682, r261683, r261684, r261685, r261686, r261687, r261688,
2014-05-15 21:21:47 +00:00
if_atereg.h
…
if_macb.c
Mechanically substitute flags from historic mbuf allocator with
2012-12-05 08:04:20 +00:00
if_macbreg.h
…
if_macbvar.h
MFC r258779,r258780,r258787,r258822:
2014-02-04 03:36:42 +00:00
std.at91
Set machine correctly on ARM. This allows universe to use the correct world
2012-08-18 05:48:19 +00:00
std.at91sam9
Set machine correctly on ARM. This allows universe to use the correct world
2012-08-18 05:48:19 +00:00
std.at91sam9g45
Set machine correctly on ARM. This allows universe to use the correct world
2012-08-18 05:48:19 +00:00
std.atmel
MFC r273703:
2014-11-08 03:42:19 +00:00
std.bwct
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
2014-05-15 02:41:23 +00:00
std.eb9200
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
2014-05-15 02:41:23 +00:00
std.ethernut5
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
2014-05-15 02:41:23 +00:00
std.hl200
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
2014-05-15 02:41:23 +00:00
std.hl201
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
2014-05-15 02:41:23 +00:00
std.kb920x
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
2014-05-15 02:41:23 +00:00
std.qila9g20
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
2014-05-15 02:41:23 +00:00
std.sam9g20ek
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
2014-05-15 02:41:23 +00:00
std.sam9x25ek
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
2014-05-15 02:41:23 +00:00
std.sam9260ek
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
2014-05-15 02:41:23 +00:00
std.sn9g45
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
2014-05-15 02:41:23 +00:00
std.tsc4370
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
2014-05-15 02:41:23 +00:00
uart_bus_at91usart.c
MFC r279723, r279724:
2015-05-23 20:54:25 +00:00
uart_cpu_at91usart.c
MFC r279723, r279724:
2015-05-23 20:54:25 +00:00
uart_dev_at91usart.c
MFC r279723, r279724:
2015-05-23 20:54:25 +00:00