d/numam-dpdk
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
580b85f6ba
numam-dpdk/drivers/net/e1000/igb_ethdev.c

5425 lines
153 KiB
C
Raw Normal View History

first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
/*-
* BSD LICENSE
remove trailing whitespaces This commit removes trailing whitespace from lines in files. Almost all files are affected, as the BSD license copyright header had trailing whitespace on 4 lines in it [hence the number of files reporting 8 lines changed in the diffstat]. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> [Thomas: remove spaces before tabs in libs] [Thomas: remove more trailing spaces in non-C files] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-03 23:42:50 +00:00
*
e1000: fix VF MAC address on close Allow reprogramming of the RAR with a zero mac address, to ensure that the VF traffic goes to the PF after stop, close and detach of the VF. Fixes: be2d648a2dd3 ("igb: add PF support") Fixes: d82170d27918 ("igb: add VF support") Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2016-03-02 16:09:06 +00:00
* Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
* All rights reserved.
remove trailing whitespaces This commit removes trailing whitespace from lines in files. Almost all files are affected, as the BSD license copyright header had trailing whitespace on 4 lines in it [hence the number of files reporting 8 lines changed in the diffstat]. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> [Thomas: remove spaces before tabs in libs] [Thomas: remove more trailing spaces in non-C files] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-03 23:42:50 +00:00
*
doc: whitespace changes in licenses Signed-off-by: Intel
2013-09-18 10:00:00 +00:00
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
* are met:
remove trailing whitespaces This commit removes trailing whitespace from lines in files. Almost all files are affected, as the BSD license copyright header had trailing whitespace on 4 lines in it [hence the number of files reporting 8 lines changed in the diffstat]. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> [Thomas: remove spaces before tabs in libs] [Thomas: remove more trailing spaces in non-C files] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-03 23:42:50 +00:00
*
doc: whitespace changes in licenses Signed-off-by: Intel
2013-09-18 10:00:00 +00:00
* * Redistributions of source code must retain the above copyright
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
* notice, this list of conditions and the following disclaimer.
doc: whitespace changes in licenses Signed-off-by: Intel
2013-09-18 10:00:00 +00:00
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
* distribution.
doc: whitespace changes in licenses Signed-off-by: Intel
2013-09-18 10:00:00 +00:00
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
* from this software without specific prior written permission.
remove trailing whitespaces This commit removes trailing whitespace from lines in files. Almost all files are affected, as the BSD license copyright header had trailing whitespace on 4 lines in it [hence the number of files reporting 8 lines changed in the diffstat]. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> [Thomas: remove spaces before tabs in libs] [Thomas: remove more trailing spaces in non-C files] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-03 23:42:50 +00:00
*
doc: whitespace changes in licenses Signed-off-by: Intel
2013-09-18 10:00:00 +00:00
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/queue.h>
#include <stdio.h>
#include <errno.h>
#include <stdint.h>
#include <stdarg.h>
#include <rte_common.h>
#include <rte_interrupts.h>
#include <rte_byteorder.h>
#include <rte_log.h>
#include <rte_debug.h>
#include <rte_pci.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
drivers/net: do not use ethdev driver Signed-off-by: Jan Blunck <jblunck@infradead.org> Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org>
2017-04-11 15:44:24 +00:00
#include <rte_ethdev_pci.h>
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
#include <rte_memory.h>
#include <rte_memzone.h>
#include <rte_eal.h>
#include <rte_atomic.h>
#include <rte_malloc.h>
igb: convert to use of PMD_REGISTER_DRIVER and fix linking Convert the igb pmd driver to use the PMD_REGISTER_DRIVER macro. This means that the test applications now have no reference to the igb library when building DSO's and must specify its use on the command line with the -d option. Static linking will still initalize the driver automatically. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-04-21 14:59:32 +00:00
#include <rte_dev.h>
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
#include "e1000_logs.h"
e1000: move to drivers/net/ Move e1000 pmd to drivers/net directory As part of move, rename "e1000" subdirectory, which contains the code from the "base driver", to "base". Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: John McNamara <john.mcnamara@intel.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2015-05-15 15:56:49 +00:00
#include "base/e1000_api.h"
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
#include "e1000_ethdev.h"
igb: add access to specific device info add function to support ethtool ops: - get_reg_length - get_regs - get_eeprom_length - get_eeprom - set_eeprom Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com> Acked-by: Andrew Harvey <agh@cisco.com> Acked-by: David Harton <dharton@cisco.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-07-16 13:25:36 +00:00
#include "igb_regs.h"
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
igb: set default Rx/Tx configuration Many sample apps use duplicated code to set rte_eth_txconf and rte_eth_rxconf structures. This patch allows the user to get a default optimal RX/TX configuration through rte_eth_dev_info get, and still any parameters may be tweaked as wished, before setting up queues. Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Reviewed-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: David Marchand <david.marchand@6wind.com> [Thomas: split patch]
2014-10-01 09:49:04 +00:00
/*
* Default values for port configuration
*/
#define IGB_DEFAULT_RX_FREE_THRESH 32
igb: set default thresholds based on MAC type This brings the DPDK igb driver inline with the behavior used by the current Linux driver. The IGB hardware has several different MAC types and the threshold values that work vary based on the hardware. Since DPDK 1.8 it has been up to devices to provide the correct default configuration parameter. But the igb driver gives values that are broken on some devices, and always causes a warning message at startup. Please test this on real hardware, I don't have the luxury of a hardware lab full of variations of this chip. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2016-01-22 01:38:37 +00:00
#define IGB_DEFAULT_RX_PTHRESH ((hw->mac.type == e1000_i354) ? 12 : 8)
igb: set default Rx/Tx configuration Many sample apps use duplicated code to set rte_eth_txconf and rte_eth_rxconf structures. This patch allows the user to get a default optimal RX/TX configuration through rte_eth_dev_info get, and still any parameters may be tweaked as wished, before setting up queues. Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Reviewed-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: David Marchand <david.marchand@6wind.com> [Thomas: split patch]
2014-10-01 09:49:04 +00:00
#define IGB_DEFAULT_RX_HTHRESH 8
igb: set default thresholds based on MAC type This brings the DPDK igb driver inline with the behavior used by the current Linux driver. The IGB hardware has several different MAC types and the threshold values that work vary based on the hardware. Since DPDK 1.8 it has been up to devices to provide the correct default configuration parameter. But the igb driver gives values that are broken on some devices, and always causes a warning message at startup. Please test this on real hardware, I don't have the luxury of a hardware lab full of variations of this chip. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2016-01-22 01:38:37 +00:00
#define IGB_DEFAULT_RX_WTHRESH ((hw->mac.type == e1000_82576) ? 1 : 4)
igb: set default Rx/Tx configuration Many sample apps use duplicated code to set rte_eth_txconf and rte_eth_rxconf structures. This patch allows the user to get a default optimal RX/TX configuration through rte_eth_dev_info get, and still any parameters may be tweaked as wished, before setting up queues. Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Reviewed-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: David Marchand <david.marchand@6wind.com> [Thomas: split patch]
2014-10-01 09:49:04 +00:00
igb: set default thresholds based on MAC type This brings the DPDK igb driver inline with the behavior used by the current Linux driver. The IGB hardware has several different MAC types and the threshold values that work vary based on the hardware. Since DPDK 1.8 it has been up to devices to provide the correct default configuration parameter. But the igb driver gives values that are broken on some devices, and always causes a warning message at startup. Please test this on real hardware, I don't have the luxury of a hardware lab full of variations of this chip. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2016-01-22 01:38:37 +00:00
#define IGB_DEFAULT_TX_PTHRESH ((hw->mac.type == e1000_i354) ? 20 : 8)
#define IGB_DEFAULT_TX_HTHRESH 1
#define IGB_DEFAULT_TX_WTHRESH ((hw->mac.type == e1000_82576) ? 1 : 16)
igb: set default Rx/Tx configuration Many sample apps use duplicated code to set rte_eth_txconf and rte_eth_rxconf structures. This patch allows the user to get a default optimal RX/TX configuration through rte_eth_dev_info get, and still any parameters may be tweaked as wished, before setting up queues. Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Reviewed-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: David Marchand <david.marchand@6wind.com> [Thomas: split patch]
2014-10-01 09:49:04 +00:00
ethdev: add the hash key size per device To support querying hash key size per port, an new field of 'hash_key_size' was added in 'struct rte_eth_dev_info' for storing hash key size in bytes. The correct hash key size in bytes should be filled into the 'struct rte_eth_dev_info', to support querying it. Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-06-12 07:33:56 +00:00
#define IGB_HKEY_MAX_INDEX 10
ethdev: support multiple sizes of redirection table As 40G NIC supports different sizes (128/512/64 entries) of redirection table from that (128 entries) of 1G and 10G NICs, support of multiple sizes of redirection table is needed. It includes, * Redefine 'struct rte_eth_rss_reta' in ethdev. - To 'struct rte_eth_rss_reta_entry64' which contains 64 entries and 64 bits mask. - Array of above new structure can be used for any number of redirection table entries, as long as the number is multiple of 64. This is quite flexible for the future expanding of redirection table. * Redefinition of relevant interfaces in ethdev. - Interface of reta update has been redefined with new parameters. - Interface of reta query has been redefined with new parameters. * Rework of 1G PMD in igb. - reta update has been reworked. - reta query has been reworked. * Rework of 10G PMD in ixgbe. - reta update has been reworked. - reta query has been reworked. * Rework of 40G PMD (PF only) in i40e. - reta update has been reworked. - reta query has been reworked. * Implement relevant commands in testpmd. Test report: http://dpdk.org/ml/archives/dev/2014-November/008362.html Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Tested-by: Erlu Chen <erlu.chen@intel.com>
2014-11-15 16:03:43 +00:00
/* Bit shift and mask */
#define IGB_4_BIT_WIDTH (CHAR_BIT / 2)
#define IGB_4_BIT_MASK RTE_LEN2MASK(IGB_4_BIT_WIDTH, uint8_t)
#define IGB_8_BIT_WIDTH CHAR_BIT
#define IGB_8_BIT_MASK UINT8_MAX
e1000: add ieee1588 timestamping Add e1000/igb support for new ethdev APIs to enable and read IEEE1588 PTP timestamps. Signed-off-by: John McNamara <john.mcnamara@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2015-07-02 15:16:29 +00:00
/* Additional timesync values. */
drivers: fix constant suffix for 32-bit platforms There is a compilation issue with some compilers. In i686 platform, long is 32bit, so XXX_CYCLECOUNTER_MASK need define as 'ULL' Fixes: 9c857bf6be87 ("igb: support ieee1588 functions for device time") Fixes: 1c4445e1f28e ("ixgbe: support ieee1588 functions for device time") Fixes: f3a4e40eca0c ("i40e: support ieee1588 functions for device time") Signed-off-by: Michael Qiu <michael.qiu@intel.com>
2015-11-27 03:36:05 +00:00
#define E1000_CYCLECOUNTER_MASK 0xffffffffffffffffULL
igb: support ieee1588 functions for device time Add additional functions to support the existing IEEE1588 functionality and to enable getting, setting and adjusting the device time. Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com> Reviewed-by: John McNamara <john.mcnamara@intel.com>
2015-11-13 16:09:10 +00:00
#define E1000_ETQF_FILTER_1588 3
#define IGB_82576_TSYNC_SHIFT 16
#define E1000_INCPERIOD_82576 (1 << E1000_TIMINCA_16NS_SHIFT)
#define E1000_INCVALUE_82576 (16 << IGB_82576_TSYNC_SHIFT)
igb: fix ieee1588 timestamping Ieee1588 reads system time to set its timestamp. On 1G NICs, for example, i350, system time is disabled by default. It means the ieee1588 timestamp will always be 0. This patch enables system time when ieee1588 is enabled. Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: John McNamara <john.mcnamara@intel.com>
2015-07-31 01:20:30 +00:00
#define E1000_TSAUXC_DISABLE_SYSTIME 0x80000000
e1000: add ieee1588 timestamping Add e1000/igb support for new ethdev APIs to enable and read IEEE1588 PTP timestamps. Signed-off-by: John McNamara <john.mcnamara@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2015-07-02 15:16:29 +00:00
net/igb: support VF mailbox interrupt for link up/down When using kernel PF and DPDK VF, when the PF driver finds the link state changes, up -> down or down -> up, the driver will send a message to VF by mailbox. This link state change may be triggered by PHY disconnection/reconnection, user config change like *ifconfig down/up* or interface parameter, like MTU change. This patch enables the support of the mailbox interrupt, so VF driver can receive the message for link up/down. After VF receives this message, VF port need to be reset to recover. This needs to be handled by the application so this patch allows the app to register a reset callback so it can reset the VF port. Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Jingjing Wu <jingjing.wu@intel.com>
2016-06-01 01:53:09 +00:00
#define E1000_VTIVAR_MISC 0x01740
#define E1000_VTIVAR_MISC_MASK 0xFF
#define E1000_VTIVAR_VALID 0x80
#define E1000_VTIVAR_MISC_MAILBOX 0
#define E1000_VTIVAR_MISC_INTR_MASK 0x3
net/e1000: configure outer VLAN TPID field This patch enables configuring the outer TPID for double VLAN. Note that all other TPID values, for single VLANs or inner VLAN in the QinQ case, are read only. Signed-off-by: Beilei Xing <beilei.xing@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2016-06-16 13:36:28 +00:00
/* External VLAN Enable bit mask */
#define E1000_CTRL_EXT_EXT_VLAN (1 << 26)
/* External VLAN Ether Type bit mask and shift */
#define E1000_VET_VET_EXT 0xFFFF0000
#define E1000_VET_VET_EXT_SHIFT 16
e1000: update RX/TX queue configuration Queues are allocated by rte_ether. Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
static int eth_igb_configure(struct rte_eth_dev *dev);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
static int eth_igb_start(struct rte_eth_dev *dev);
static void eth_igb_stop(struct rte_eth_dev *dev);
net/igb: support setting link up or down Add driver functions to set link state up or down. Signed-off-by: Aaron Campbell <aaron@arbor.net> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2016-06-27 15:46:25 +00:00
static int eth_igb_dev_set_link_up(struct rte_eth_dev *dev);
static int eth_igb_dev_set_link_down(struct rte_eth_dev *dev);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
static void eth_igb_close(struct rte_eth_dev *dev);
static void eth_igb_promiscuous_enable(struct rte_eth_dev *dev);
static void eth_igb_promiscuous_disable(struct rte_eth_dev *dev);
static void eth_igb_allmulticast_enable(struct rte_eth_dev *dev);
static void eth_igb_allmulticast_disable(struct rte_eth_dev *dev);
static int eth_igb_link_update(struct rte_eth_dev *dev,
int wait_to_complete);
static void eth_igb_stats_get(struct rte_eth_dev *dev,
struct rte_eth_stats *rte_stats);
igb: add extended stats Add xstats_get() and xstats_reset() functions to igb driver, and the necessary strings to expose these NIC statistics. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-11-02 10:19:01 +00:00
static int eth_igb_xstats_get(struct rte_eth_dev *dev,
ethdev: remove name from extended statistic fetch The current extended ethernet statistics fetching involve doing several string operations, which causes performance issues if there are lots of statistics and/or network interfaces. This patch changes the test-pmd and proc_info applications to use the new xstats API, and removes deprecated code associated with the old API. Signed-off-by: Remy Horton <remy.horton@intel.com>
2016-06-15 15:25:33 +00:00
struct rte_eth_xstat *xstats, unsigned n);
net/igb: support xstats by ID To achieve functionality of retrieving only specific statistics given by application there are two new functions added: eth_igb_xstats_get_by_id() which retrieve values of statistics specified by ids array and eth_igb_xstats_get_names_by_id() which retrieve names of statistics specified by ids array. Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
2017-04-27 14:42:39 +00:00
static int eth_igb_xstats_get_by_id(struct rte_eth_dev *dev,
const uint64_t *ids,
uint64_t *values, unsigned int n);
net/igb: fetch extended statistics with integer ids The current extended ethernet statistics fetching involve doing several string operations, which causes performance issues if there are lots of statistics and/or network interfaces. This patch changes the e1000 driver to use the new API that seperates name string and value queries. Signed-off-by: Remy Horton <remy.horton@intel.com>
2016-06-15 15:25:29 +00:00
static int eth_igb_xstats_get_names(struct rte_eth_dev *dev,
ethdev: revert xstats by ID Revert patches to provide clear view for upcoming changes. Reverted patches are listed below: commit ea85e7d711b6 ("ethdev: retrieve xstats by ID") commit a954495245c4 ("ethdev: get xstats ID by name") commit 1223608adb9b ("app/proc-info: support xstats by ID") commit 25e38f09af9c ("net/e1000: support xstats by ID") commit 923419333f5a ("net/ixgbe: support xstats by ID") Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
2017-04-27 14:42:35 +00:00
struct rte_eth_xstat_name *xstats_names,
net/igb: support xstats by ID To achieve functionality of retrieving only specific statistics given by application there are two new functions added: eth_igb_xstats_get_by_id() which retrieve values of statistics specified by ids array and eth_igb_xstats_get_names_by_id() which retrieve names of statistics specified by ids array. Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
2017-04-27 14:42:39 +00:00
unsigned int size);
static int eth_igb_xstats_get_names_by_id(struct rte_eth_dev *dev,
struct rte_eth_xstat_name *xstats_names, const uint64_t *ids,
unsigned int limit);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
static void eth_igb_stats_reset(struct rte_eth_dev *dev);
igb: add extended stats Add xstats_get() and xstats_reset() functions to igb driver, and the necessary strings to expose these NIC statistics. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-11-02 10:19:01 +00:00
static void eth_igb_xstats_reset(struct rte_eth_dev *dev);
net/e1000: add firmware version get This patch adds a new function eth_igb_fw_version_get. Signed-off-by: Qiming Yang <qiming.yang@intel.com> Acked-by: Remy Horton <remy.horton@intel.com>
2017-01-16 10:48:28 +00:00
static int eth_igb_fw_version_get(struct rte_eth_dev *dev,
char *fw_version, size_t fw_size);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
static void eth_igb_infos_get(struct rte_eth_dev *dev,
igb: add redirection table size in device info As more and more information are different between PF and VF, ops of 'dev_infos_get' has been implemented respectively. In addition, new field of 'reta_size' has been added in 'struct rte_eth_dev_info' for returning redirection table size. Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-11-15 16:03:40 +00:00
struct rte_eth_dev_info *dev_info);
ethdev: query supported packet types Add a new API rte_eth_dev_get_supported_ptypes to query what packet types can be filled by a given device. The device should be already started or its PMD RX burst function already decided, since the packet types supported may vary depending on RX function. Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
2016-03-14 20:50:50 +00:00
static const uint32_t *eth_igb_supported_ptypes_get(struct rte_eth_dev *dev);
igb: add redirection table size in device info As more and more information are different between PF and VF, ops of 'dev_infos_get' has been implemented respectively. In addition, new field of 'reta_size' has been added in 'struct rte_eth_dev_info' for returning redirection table size. Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-11-15 16:03:40 +00:00
static void eth_igbvf_infos_get(struct rte_eth_dev *dev,
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
struct rte_eth_dev_info *dev_info);
ethdev: retrieve flow control configuration This patch adds a new function in ethdev api to retrieve current flow control configuration. This operation has been implemented for rte_em_pmd, rte_igb_pmd and rte_ixgbe_pmd. Signed-off-by: Zijie Pan <zijie.pan@6wind.com> Signed-off-by: David Marchand <david.marchand@6wind.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-06-17 18:09:26 +00:00
static int eth_igb_flow_ctrl_get(struct rte_eth_dev *dev,
struct rte_eth_fc_conf *fc_conf);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
static int eth_igb_flow_ctrl_set(struct rte_eth_dev *dev,
struct rte_eth_fc_conf *fc_conf);
pci: rework interrupt handling Signed-off-by: Intel <intel.com>
2013-06-03 00:00:00 +00:00
static int eth_igb_lsc_interrupt_setup(struct rte_eth_dev *dev);
igb: enable Rx queue interrupts for PF The patch does below for igb PF: - Setup NIC to generate MSI-X interrupts - Set the IVAR register to map interrupt causes to vectors - Implement interrupt enable/disable functions Signed-off-by: Danny Zhou <danny.zhou@intel.com> Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-07-20 03:02:28 +00:00
static int eth_igb_rxq_interrupt_setup(struct rte_eth_dev *dev);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
static int eth_igb_interrupt_get_status(struct rte_eth_dev *dev);
net/e1000: localize mapping of ethdev to PCI device Create one macro for where PCI device information is extracted from ethernet device. Makes later changes easier to review, and test. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jan Blunck <jblunck@infradead.org>
2016-12-23 15:57:56 +00:00
static int eth_igb_interrupt_action(struct rte_eth_dev *dev,
struct rte_intr_handle *handle);
eal: clean up interrupt handle The patch change the prototype of callback function (rte_intr_callback_fn) by removing the unnecessary parameter. Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
2017-04-06 12:42:22 +00:00
static void eth_igb_interrupt_handler(void *param);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
static int igb_hardware_init(struct e1000_hw *hw);
static void igb_hw_control_acquire(struct e1000_hw *hw);
static void igb_hw_control_release(struct e1000_hw *hw);
static void igb_init_manageability(struct e1000_hw *hw);
static void igb_release_manageability(struct e1000_hw *hw);
e1000: add vlan offload support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
ethdev: MTU accessors This patch adds two new functions in ethdev api to retrieve current MTU and change MTU of a port. Only .mtu_set function is pmd specific. pmd should update its max_rx_pkt_len if needed. This operation has been implemented for rte_em_pmd, rte_igb_pmd and rte_ixgbe_pmd. Signed-off-by: Samuel Gauthier <samuel.gauthier@6wind.com> Signed-off-by: Ivan Boule <ivan.boule@6wind.com> Signed-off-by: David Marchand <david.marchand@6wind.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-06-17 18:09:30 +00:00
static int eth_igb_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
e1000: add vlan offload support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
static int eth_igb_vlan_filter_set(struct rte_eth_dev *dev,
uint16_t vlan_id, int on);
ethdev: add vlan type when setting ether type In order to set ether type of VLAN for single VLAN, inner and outer VLAN, the VLAN type as an input parameter is added to 'rte_eth_dev_set_vlan_ether_type()'. In addition, corresponding changes in e1000, ixgbe and i40e are also added. It is an ABI break but ethdev library is already bumped for 16.04. Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2016-03-11 16:50:57 +00:00
static int eth_igb_vlan_tpid_set(struct rte_eth_dev *dev,
enum rte_vlan_type vlan_type,
uint16_t tpid_id);
e1000: add vlan offload support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
static void eth_igb_vlan_offload_set(struct rte_eth_dev *dev, int mask);
static void igb_vlan_hw_filter_enable(struct rte_eth_dev *dev);
static void igb_vlan_hw_filter_disable(struct rte_eth_dev *dev);
static void igb_vlan_hw_strip_enable(struct rte_eth_dev *dev);
static void igb_vlan_hw_strip_disable(struct rte_eth_dev *dev);
static void igb_vlan_hw_extend_enable(struct rte_eth_dev *dev);
static void igb_vlan_hw_extend_disable(struct rte_eth_dev *dev);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
static int eth_igb_led_on(struct rte_eth_dev *dev);
static int eth_igb_led_off(struct rte_eth_dev *dev);
static void igb_intr_disable(struct e1000_hw *hw);
static int igb_get_rx_buffer_size(struct e1000_hw *hw);
ethdev: fix adding invalid MAC address Some customers find adding MAC addr to VF sometimes can fail, but it is still stored in dev->data->mac_addrs[ ]. So this can lead to some errors that assumes the non-zero entry in dev->data->mac_addrs[ ] is valid. Following acknowledgements are from specific NIC PMD maintainer for their managing part. This patch changes the ethdev internal API, it should not be backported to a stable/LTS release so far. Fixes: af75078fece3 ("first public release") Signed-off-by: Wei Dai <wei.dai@intel.com> Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2017-05-05 00:40:00 +00:00
static int eth_igb_rar_set(struct rte_eth_dev *dev,
struct ether_addr *mac_addr,
uint32_t index, uint32_t pool);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
static void eth_igb_rar_clear(struct rte_eth_dev *dev, uint32_t index);
igb: add default mac address modifier - set_mac_addr Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com> Acked-by: Andrew Harvey <agh@cisco.com> Acked-by: David Harton <dharton@cisco.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-07-16 13:25:36 +00:00
static void eth_igb_default_mac_addr_set(struct rte_eth_dev *dev,
struct ether_addr *addr);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
static void igbvf_intr_disable(struct e1000_hw *hw);
static int igbvf_dev_configure(struct rte_eth_dev *dev);
static int igbvf_dev_start(struct rte_eth_dev *dev);
static void igbvf_dev_stop(struct rte_eth_dev *dev);
static void igbvf_dev_close(struct rte_eth_dev *dev);
e1000: support VF promiscuous and allmulticast Enable promiscuous and allmulticast mode control from the VF using rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() and rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable(). For promiscuous mode host/PF igb driver should be built with IGB_ENABLE_VF_PROMISC. For allmulticast mode "allmulti" flag should be set for appropriate PF ifconfig eth0 allmulti Signed-off-by: Yury Kylulin <yury.kylulin@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2016-02-09 09:09:43 +00:00
static void igbvf_promiscuous_enable(struct rte_eth_dev *dev);
static void igbvf_promiscuous_disable(struct rte_eth_dev *dev);
static void igbvf_allmulticast_enable(struct rte_eth_dev *dev);
static void igbvf_allmulticast_disable(struct rte_eth_dev *dev);
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
static int eth_igbvf_link_update(struct e1000_hw *hw);
igbvf: add extended stats Add xstats functionality to igbvf PMD, adding necessary statistic strings. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-11-02 10:19:02 +00:00
static void eth_igbvf_stats_get(struct rte_eth_dev *dev,
struct rte_eth_stats *rte_stats);
static int eth_igbvf_xstats_get(struct rte_eth_dev *dev,
ethdev: remove name from extended statistic fetch The current extended ethernet statistics fetching involve doing several string operations, which causes performance issues if there are lots of statistics and/or network interfaces. This patch changes the test-pmd and proc_info applications to use the new xstats API, and removes deprecated code associated with the old API. Signed-off-by: Remy Horton <remy.horton@intel.com>
2016-06-15 15:25:33 +00:00
struct rte_eth_xstat *xstats, unsigned n);
net/igb: fetch extended statistics with integer ids The current extended ethernet statistics fetching involve doing several string operations, which causes performance issues if there are lots of statistics and/or network interfaces. This patch changes the e1000 driver to use the new API that seperates name string and value queries. Signed-off-by: Remy Horton <remy.horton@intel.com>
2016-06-15 15:25:29 +00:00
static int eth_igbvf_xstats_get_names(struct rte_eth_dev *dev,
struct rte_eth_xstat_name *xstats_names,
unsigned limit);
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
static void eth_igbvf_stats_reset(struct rte_eth_dev *dev);
remove trailing whitespaces This commit removes trailing whitespace from lines in files. Almost all files are affected, as the BSD license copyright header had trailing whitespace on 4 lines in it [hence the number of files reporting 8 lines changed in the diffstat]. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> [Thomas: remove spaces before tabs in libs] [Thomas: remove more trailing spaces in non-C files] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-03 23:42:50 +00:00
static int igbvf_vlan_filter_set(struct rte_eth_dev *dev,
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
uint16_t vlan_id, int on);
static int igbvf_set_vfta(struct e1000_hw *hw, uint16_t vid, bool on);
static void igbvf_set_vfta_all(struct rte_eth_dev *dev, bool on);
igb: add default mac address modifier - set_mac_addr Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com> Acked-by: Andrew Harvey <agh@cisco.com> Acked-by: David Harton <dharton@cisco.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-07-16 13:25:36 +00:00
static void igbvf_default_mac_addr_set(struct rte_eth_dev *dev,
struct ether_addr *addr);
igb: add access to specific device info add function to support ethtool ops: - get_reg_length - get_regs - get_eeprom_length - get_eeprom - set_eeprom Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com> Acked-by: Andrew Harvey <agh@cisco.com> Acked-by: David Harton <dharton@cisco.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-07-16 13:25:36 +00:00
static int igbvf_get_reg_length(struct rte_eth_dev *dev);
static int igbvf_get_regs(struct rte_eth_dev *dev,
struct rte_dev_reg_info *regs);
igb: RSS RETA configuration Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
static int eth_igb_rss_reta_update(struct rte_eth_dev *dev,
ethdev: support multiple sizes of redirection table As 40G NIC supports different sizes (128/512/64 entries) of redirection table from that (128 entries) of 1G and 10G NICs, support of multiple sizes of redirection table is needed. It includes, * Redefine 'struct rte_eth_rss_reta' in ethdev. - To 'struct rte_eth_rss_reta_entry64' which contains 64 entries and 64 bits mask. - Array of above new structure can be used for any number of redirection table entries, as long as the number is multiple of 64. This is quite flexible for the future expanding of redirection table. * Redefinition of relevant interfaces in ethdev. - Interface of reta update has been redefined with new parameters. - Interface of reta query has been redefined with new parameters. * Rework of 1G PMD in igb. - reta update has been reworked. - reta query has been reworked. * Rework of 10G PMD in ixgbe. - reta update has been reworked. - reta query has been reworked. * Rework of 40G PMD (PF only) in i40e. - reta update has been reworked. - reta query has been reworked. * Implement relevant commands in testpmd. Test report: http://dpdk.org/ml/archives/dev/2014-November/008362.html Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Tested-by: Erlu Chen <erlu.chen@intel.com>
2014-11-15 16:03:43 +00:00
struct rte_eth_rss_reta_entry64 *reta_conf,
uint16_t reta_size);
igb: RSS RETA configuration Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
static int eth_igb_rss_reta_query(struct rte_eth_dev *dev,
ethdev: support multiple sizes of redirection table As 40G NIC supports different sizes (128/512/64 entries) of redirection table from that (128 entries) of 1G and 10G NICs, support of multiple sizes of redirection table is needed. It includes, * Redefine 'struct rte_eth_rss_reta' in ethdev. - To 'struct rte_eth_rss_reta_entry64' which contains 64 entries and 64 bits mask. - Array of above new structure can be used for any number of redirection table entries, as long as the number is multiple of 64. This is quite flexible for the future expanding of redirection table. * Redefinition of relevant interfaces in ethdev. - Interface of reta update has been redefined with new parameters. - Interface of reta query has been redefined with new parameters. * Rework of 1G PMD in igb. - reta update has been reworked. - reta query has been reworked. * Rework of 10G PMD in ixgbe. - reta update has been reworked. - reta query has been reworked. * Rework of 40G PMD (PF only) in i40e. - reta update has been reworked. - reta query has been reworked. * Implement relevant commands in testpmd. Test report: http://dpdk.org/ml/archives/dev/2014-November/008362.html Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Tested-by: Erlu Chen <erlu.chen@intel.com>
2014-11-15 16:03:43 +00:00
struct rte_eth_rss_reta_entry64 *reta_conf,
uint16_t reta_size);
igb: migrate syn filter to new API This patch defines new functions dealing with syn filter. It removes old functions of syn filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-11 07:51:47 +00:00
static int eth_igb_syn_filter_set(struct rte_eth_dev *dev,
struct rte_eth_syn_filter *filter,
bool add);
static int eth_igb_syn_filter_get(struct rte_eth_dev *dev,
struct rte_eth_syn_filter *filter);
static int eth_igb_syn_filter_handle(struct rte_eth_dev *dev,
enum rte_filter_op filter_op,
void *arg);
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
static int igb_add_2tuple_filter(struct rte_eth_dev *dev,
struct rte_eth_ntuple_filter *ntuple_filter);
static int igb_remove_2tuple_filter(struct rte_eth_dev *dev,
struct rte_eth_ntuple_filter *ntuple_filter);
igb: migrate flex filter to new API This patch defines new functions dealing with flex filter. It removes old functions of flex filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-21 01:53:08 +00:00
static int eth_igb_add_del_flex_filter(struct rte_eth_dev *dev,
struct rte_eth_flex_filter *filter,
bool add);
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
static int eth_igb_get_flex_filter(struct rte_eth_dev *dev,
igb: migrate flex filter to new API This patch defines new functions dealing with flex filter. It removes old functions of flex filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-21 01:53:08 +00:00
struct rte_eth_flex_filter *filter);
static int eth_igb_flex_filter_handle(struct rte_eth_dev *dev,
enum rte_filter_op filter_op,
void *arg);
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
static int igb_add_5tuple_filter_82576(struct rte_eth_dev *dev,
struct rte_eth_ntuple_filter *ntuple_filter);
static int igb_remove_5tuple_filter_82576(struct rte_eth_dev *dev,
struct rte_eth_ntuple_filter *ntuple_filter);
static int igb_add_del_ntuple_filter(struct rte_eth_dev *dev,
struct rte_eth_ntuple_filter *filter,
bool add);
static int igb_get_ntuple_filter(struct rte_eth_dev *dev,
struct rte_eth_ntuple_filter *filter);
static int igb_ntuple_filter_handle(struct rte_eth_dev *dev,
enum rte_filter_op filter_op,
void *arg);
igb: use generic filter control for ethertype filter This patch removes old functions which deal with ethertype filter in igb driver. It also defines eth_igb_filter_ctrl which is binding to filter_ctrl API, and ethertype filter can be dealt with through this new entrance. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-01-12 07:16:11 +00:00
static int igb_add_del_ethertype_filter(struct rte_eth_dev *dev,
struct rte_eth_ethertype_filter *filter,
bool add);
static int igb_ethertype_filter_handle(struct rte_eth_dev *dev,
enum rte_filter_op filter_op,
void *arg);
static int igb_get_ethertype_filter(struct rte_eth_dev *dev,
struct rte_eth_ethertype_filter *filter);
static int eth_igb_filter_ctrl(struct rte_eth_dev *dev,
enum rte_filter_type filter_type,
enum rte_filter_op filter_op,
void *arg);
igb: add access to specific device info add function to support ethtool ops: - get_reg_length - get_regs - get_eeprom_length - get_eeprom - set_eeprom Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com> Acked-by: Andrew Harvey <agh@cisco.com> Acked-by: David Harton <dharton@cisco.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-07-16 13:25:36 +00:00
static int eth_igb_get_reg_length(struct rte_eth_dev *dev);
static int eth_igb_get_regs(struct rte_eth_dev *dev,
struct rte_dev_reg_info *regs);
static int eth_igb_get_eeprom_length(struct rte_eth_dev *dev);
static int eth_igb_get_eeprom(struct rte_eth_dev *dev,
struct rte_dev_eeprom_info *eeprom);
static int eth_igb_set_eeprom(struct rte_eth_dev *dev,
struct rte_dev_eeprom_info *eeprom);
e1000: add multicast MAC address filtering Support the PMD function "set_mc_addr_list" in the "igb", "igb-vf", and "em" Poll Mode Drivers. Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
2015-05-28 15:05:21 +00:00
static int eth_igb_set_mc_addr_list(struct rte_eth_dev *dev,
struct ether_addr *mc_addr_set,
uint32_t nb_mc_addr);
e1000: add ieee1588 timestamping Add e1000/igb support for new ethdev APIs to enable and read IEEE1588 PTP timestamps. Signed-off-by: John McNamara <john.mcnamara@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2015-07-02 15:16:29 +00:00
static int igb_timesync_enable(struct rte_eth_dev *dev);
static int igb_timesync_disable(struct rte_eth_dev *dev);
static int igb_timesync_read_rx_timestamp(struct rte_eth_dev *dev,
struct timespec *timestamp,
uint32_t flags);
static int igb_timesync_read_tx_timestamp(struct rte_eth_dev *dev,
struct timespec *timestamp);
igb: support ieee1588 functions for device time Add additional functions to support the existing IEEE1588 functionality and to enable getting, setting and adjusting the device time. Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com> Reviewed-by: John McNamara <john.mcnamara@intel.com>
2015-11-13 16:09:10 +00:00
static int igb_timesync_adjust_time(struct rte_eth_dev *dev, int64_t delta);
static int igb_timesync_read_time(struct rte_eth_dev *dev,
struct timespec *timestamp);
static int igb_timesync_write_time(struct rte_eth_dev *dev,
const struct timespec *timestamp);
igb: enable Rx queue interrupts for PF The patch does below for igb PF: - Setup NIC to generate MSI-X interrupts - Set the IVAR register to map interrupt causes to vectors - Implement interrupt enable/disable functions Signed-off-by: Danny Zhou <danny.zhou@intel.com> Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-07-20 03:02:28 +00:00
static int eth_igb_rx_queue_intr_enable(struct rte_eth_dev *dev,
uint16_t queue_id);
static int eth_igb_rx_queue_intr_disable(struct rte_eth_dev *dev,
uint16_t queue_id);
static void eth_igb_assign_msix_vector(struct e1000_hw *hw, int8_t direction,
uint8_t queue, uint8_t msix_vector);
static void eth_igb_write_ivar(struct e1000_hw *hw, uint8_t msix_vector,
uint8_t index, uint8_t offset);
static void eth_igb_configure_msix_intr(struct rte_eth_dev *dev);
eal: clean up interrupt handle The patch change the prototype of callback function (rte_intr_callback_fn) by removing the unnecessary parameter. Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
2017-04-06 12:42:22 +00:00
static void eth_igbvf_interrupt_handler(void *param);
net/igb: support VF mailbox interrupt for link up/down When using kernel PF and DPDK VF, when the PF driver finds the link state changes, up -> down or down -> up, the driver will send a message to VF by mailbox. This link state change may be triggered by PHY disconnection/reconnection, user config change like *ifconfig down/up* or interface parameter, like MTU change. This patch enables the support of the mailbox interrupt, so VF driver can receive the message for link up/down. After VF receives this message, VF port need to be reset to recover. This needs to be handled by the application so this patch allows the app to register a reset callback so it can reset the VF port. Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Jingjing Wu <jingjing.wu@intel.com>
2016-06-01 01:53:09 +00:00
static void igbvf_mbx_process(struct rte_eth_dev *dev);
e1000: add multicast MAC address filtering Support the PMD function "set_mc_addr_list" in the "igb", "igb-vf", and "em" Poll Mode Drivers. Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
2015-05-28 15:05:21 +00:00
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
/*
* Define VF Stats MACRO for Non "cleared on read" register
*/
#define UPDATE_VF_STAT(reg, last, cur) \
{ \
u32 latest = E1000_READ_REG(hw, reg); \
igbvf: fix statistic wraparound Fix a misinterpreatation of VF statistic macro in e1000/igb. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Roger Melton <rmelton@cisco.com>
2015-10-12 16:45:33 +00:00
cur += (latest - last) & UINT_MAX; \
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
last = latest; \
}
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
#define IGB_FC_PAUSE_TIME 0x0680
#define IGB_LINK_UPDATE_CHECK_TIMEOUT 90 /* 9s */
#define IGB_LINK_UPDATE_CHECK_INTERVAL 100 /* ms */
igb: add PF support Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
#define IGBVF_PMD_NAME "rte_igbvf_pmd" /* PMD name */
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
static enum e1000_fc_mode igb_fc_setting = e1000_fc_full;
/*
* The set of PCI devices this driver supports
*/
pci: make device id tables const The PCI device id table is immutable and should be made const in all drivers. The pseudo drivers can initialize their local copy as necessary. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Neil Horman <nhorman@tuxdriver.com>
2015-04-16 23:23:39 +00:00
static const struct rte_pci_id pci_id_igb_map[] = {
net/igb: move PCI device IDs from EAL PCI device ids moved from common header into igb driver itself. KNI starts using pci_device_id from kni/ethtool/igb driver, this is only for KNI ethtool support, KNI data path is not affected. Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
2016-08-05 14:09:30 +00:00
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82576) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82576_FIBER) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82576_SERDES) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82576_QUAD_COPPER) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82576_QUAD_COPPER_ET2) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82576_NS) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82576_NS_SERDES) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82576_SERDES_QUAD) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82575EB_COPPER) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82575EB_FIBER_SERDES) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82575GB_QUAD_COPPER) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82580_COPPER) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82580_FIBER) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82580_SERDES) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82580_SGMII) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82580_COPPER_DUAL) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82580_QUAD_FIBER) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I350_COPPER) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I350_FIBER) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I350_SERDES) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I350_SGMII) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I350_DA4) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I210_COPPER) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I210_COPPER_OEM1) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I210_COPPER_IT) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I210_FIBER) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I210_SERDES) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I210_SGMII) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I211_COPPER) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I354_BACKPLANE_1GBPS) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I354_SGMII) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I354_BACKPLANE_2_5GBPS) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_DH89XXCC_SGMII) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_DH89XXCC_SERDES) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_DH89XXCC_BACKPLANE) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_DH89XXCC_SFP) },
{ .vendor_id = 0, /* sentinel */ },
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
};
/*
* The set of PCI devices this driver supports (for 82576&I350 VF)
*/
pci: make device id tables const The PCI device id table is immutable and should be made const in all drivers. The pseudo drivers can initialize their local copy as necessary. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Neil Horman <nhorman@tuxdriver.com>
2015-04-16 23:23:39 +00:00
static const struct rte_pci_id pci_id_igbvf_map[] = {
net/igb: move PCI device IDs from EAL PCI device ids moved from common header into igb driver itself. KNI starts using pci_device_id from kni/ethtool/igb driver, this is only for KNI ethtool support, KNI data path is not affected. Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
2016-08-05 14:09:30 +00:00
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82576_VF) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_82576_VF_HV) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I350_VF) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I350_VF_HV) },
{ .vendor_id = 0, /* sentinel */ },
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
};
e1000: get queue info and descriptor limits Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Acked-by: Remy Horton <remy.horton@intel.com>
2015-10-27 12:51:46 +00:00
static const struct rte_eth_desc_lim rx_desc_lim = {
.nb_max = E1000_MAX_RING_DESC,
.nb_min = E1000_MIN_RING_DESC,
.nb_align = IGB_RXD_ALIGN,
};
static const struct rte_eth_desc_lim tx_desc_lim = {
.nb_max = E1000_MAX_RING_DESC,
.nb_min = E1000_MIN_RING_DESC,
.nb_align = IGB_RXD_ALIGN,
net/e1000: add Tx preparation Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2016-12-23 18:40:48 +00:00
.nb_seg_max = IGB_TX_MAX_SEG,
.nb_mtu_seg_max = IGB_TX_MAX_MTU_SEG,
e1000: get queue info and descriptor limits Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Acked-by: Remy Horton <remy.horton@intel.com>
2015-10-27 12:51:46 +00:00
};
ethdev: make dev_ops const The ethernet device ops function table should be made const for safety and security. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Neil Horman <nhorman@tuxdriver.com>
2015-04-07 21:21:03 +00:00
static const struct eth_dev_ops eth_igb_ops = {
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
.dev_configure = eth_igb_configure,
.dev_start = eth_igb_start,
.dev_stop = eth_igb_stop,
net/igb: support setting link up or down Add driver functions to set link state up or down. Signed-off-by: Aaron Campbell <aaron@arbor.net> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2016-06-27 15:46:25 +00:00
.dev_set_link_up = eth_igb_dev_set_link_up,
.dev_set_link_down = eth_igb_dev_set_link_down,
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
.dev_close = eth_igb_close,
.promiscuous_enable = eth_igb_promiscuous_enable,
.promiscuous_disable = eth_igb_promiscuous_disable,
.allmulticast_enable = eth_igb_allmulticast_enable,
.allmulticast_disable = eth_igb_allmulticast_disable,
.link_update = eth_igb_link_update,
.stats_get = eth_igb_stats_get,
igb: add extended stats Add xstats_get() and xstats_reset() functions to igb driver, and the necessary strings to expose these NIC statistics. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-11-02 10:19:01 +00:00
.xstats_get = eth_igb_xstats_get,
net/igb: support xstats by ID To achieve functionality of retrieving only specific statistics given by application there are two new functions added: eth_igb_xstats_get_by_id() which retrieve values of statistics specified by ids array and eth_igb_xstats_get_names_by_id() which retrieve names of statistics specified by ids array. Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
2017-04-27 14:42:39 +00:00
.xstats_get_by_id = eth_igb_xstats_get_by_id,
.xstats_get_names_by_id = eth_igb_xstats_get_names_by_id,
net/igb: fetch extended statistics with integer ids The current extended ethernet statistics fetching involve doing several string operations, which causes performance issues if there are lots of statistics and/or network interfaces. This patch changes the e1000 driver to use the new API that seperates name string and value queries. Signed-off-by: Remy Horton <remy.horton@intel.com>
2016-06-15 15:25:29 +00:00
.xstats_get_names = eth_igb_xstats_get_names,
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
.stats_reset = eth_igb_stats_reset,
igb: add extended stats Add xstats_get() and xstats_reset() functions to igb driver, and the necessary strings to expose these NIC statistics. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-11-02 10:19:01 +00:00
.xstats_reset = eth_igb_xstats_reset,
net/e1000: add firmware version get This patch adds a new function eth_igb_fw_version_get. Signed-off-by: Qiming Yang <qiming.yang@intel.com> Acked-by: Remy Horton <remy.horton@intel.com>
2017-01-16 10:48:28 +00:00
.fw_version_get = eth_igb_fw_version_get,
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
.dev_infos_get = eth_igb_infos_get,
ethdev: query supported packet types Add a new API rte_eth_dev_get_supported_ptypes to query what packet types can be filled by a given device. The device should be already started or its PMD RX burst function already decided, since the packet types supported may vary depending on RX function. Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
2016-03-14 20:50:50 +00:00
.dev_supported_ptypes_get = eth_igb_supported_ptypes_get,
ethdev: MTU accessors This patch adds two new functions in ethdev api to retrieve current MTU and change MTU of a port. Only .mtu_set function is pmd specific. pmd should update its max_rx_pkt_len if needed. This operation has been implemented for rte_em_pmd, rte_igb_pmd and rte_ixgbe_pmd. Signed-off-by: Samuel Gauthier <samuel.gauthier@6wind.com> Signed-off-by: Ivan Boule <ivan.boule@6wind.com> Signed-off-by: David Marchand <david.marchand@6wind.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-06-17 18:09:30 +00:00
.mtu_set = eth_igb_mtu_set,
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
.vlan_filter_set = eth_igb_vlan_filter_set,
e1000: add vlan offload support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
.vlan_tpid_set = eth_igb_vlan_tpid_set,
.vlan_offload_set = eth_igb_vlan_offload_set,
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
.rx_queue_setup = eth_igb_rx_queue_setup,
igb: enable Rx queue interrupts for PF The patch does below for igb PF: - Setup NIC to generate MSI-X interrupts - Set the IVAR register to map interrupt causes to vectors - Implement interrupt enable/disable functions Signed-off-by: Danny Zhou <danny.zhou@intel.com> Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-07-20 03:02:28 +00:00
.rx_queue_intr_enable = eth_igb_rx_queue_intr_enable,
.rx_queue_intr_disable = eth_igb_rx_queue_intr_disable,
e1000: update RX/TX queue configuration Queues are allocated by rte_ether. Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
.rx_queue_release = eth_igb_rx_queue_release,
igb: retrieve RX available descriptors Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
.rx_queue_count = eth_igb_rx_queue_count,
igb: check DD bit of specific RX descriptor Signed-off-by: Intel
2013-07-22 22:00:00 +00:00
.rx_descriptor_done = eth_igb_rx_descriptor_done,
net/igb: implement descriptor status API Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2017-03-29 08:36:30 +00:00
.rx_descriptor_status = eth_igb_rx_descriptor_status,
.tx_descriptor_status = eth_igb_tx_descriptor_status,
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
.tx_queue_setup = eth_igb_tx_queue_setup,
e1000: update RX/TX queue configuration Queues are allocated by rte_ether. Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
.tx_queue_release = eth_igb_tx_queue_release,
net/igb: free consumed Tx buffers on demand Add support to the e1000 igb driver for the new API to force free consumed buffers on Tx ring. This API is independent of the tx_rs_thresh setting. With this API, buffers should be free even if tx_rs_thresh is not met. e1000 igb driver does not implement a tx_rs_thresh to free mbufs, it frees a slot in the ring as needed. However, it could be implemented at some future date. Signed-off-by: Billy McFall <bmcfall@redhat.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Keith Wiles <keith.wiles@intel.com>
2017-03-24 18:55:54 +00:00
.tx_done_cleanup = eth_igb_tx_done_cleanup,
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
.dev_led_on = eth_igb_led_on,
.dev_led_off = eth_igb_led_off,
ethdev: retrieve flow control configuration This patch adds a new function in ethdev api to retrieve current flow control configuration. This operation has been implemented for rte_em_pmd, rte_igb_pmd and rte_ixgbe_pmd. Signed-off-by: Zijie Pan <zijie.pan@6wind.com> Signed-off-by: David Marchand <david.marchand@6wind.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-06-17 18:09:26 +00:00
.flow_ctrl_get = eth_igb_flow_ctrl_get,
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
.flow_ctrl_set = eth_igb_flow_ctrl_set,
.mac_addr_add = eth_igb_rar_set,
.mac_addr_remove = eth_igb_rar_clear,
igb: add default mac address modifier - set_mac_addr Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com> Acked-by: Andrew Harvey <agh@cisco.com> Acked-by: David Harton <dharton@cisco.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-07-16 13:25:36 +00:00
.mac_addr_set = eth_igb_default_mac_addr_set,
igb: RSS RETA configuration Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
.reta_update = eth_igb_rss_reta_update,
.reta_query = eth_igb_rss_reta_query,
ethdev: allow to set RSS hash computation flags and/or key 1) Add a new function "rss_hash_update" in the PMD API to dynamically update the RSS flags and/or the RSS key used by a NIC to compute the RSS hash of input packets. The new function uses the existing data structure "rte_eth_rss_conf" for the argument that contains the new hash flags and/or the new hash key to use. 2) Add the ixgbe-specific function "ixgbe_dev_rss_hash_update" and the igb-specific function "eth_igb_rss_hash_update" to update the RSS hash configuration of ixgbe and igb controllers respectively. Before changing anything, these 2 functions check that the update RSS operation does not attempt to disable RSS, if RSS was enabled at port initialization time, or does not attempt to enable RSS, if RSS was disabled at port initialization time. Note: Configuring the RSS hash flags and the RSS key used by a NIC consists in updating appropriate PCI registers of the NIC. These operations have been manually tested with the interactive commands "write reg" and "write regbit" of the testpmd application. Signed-off-by: Ivan Boule <ivan.boule@6wind.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-05-16 08:58:40 +00:00
.rss_hash_update = eth_igb_rss_hash_update,
ethdev: allow to get RSS hash functions and key 1) Add a new function "rss_hash_conf_get" in the PMD API to retrieve the current configuration of the RSS functions and/or of the RSS key used by a NIC to compute the RSS hash of input packets. The new function uses the existing data structure "rte_eth_rss_conf" for returning the RSS hash configuration. 2) Add the ixgbe-specific function "ixgbe_dev_rss_hash_conf_get" and the igb-specific function "eth_igb_rss_hash_conf_get" to retrieve the RSS hash configuration of ixgbe and igb controllers respectively. 3) Add the command "show port X rss-hash [key]" in the testpmd application to display the RSS hash configuration of port X. Signed-off-by: Ivan Boule <ivan.boule@6wind.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-05-16 08:58:42 +00:00
.rss_hash_conf_get = eth_igb_rss_hash_conf_get,
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
.filter_ctrl = eth_igb_filter_ctrl,
e1000: add multicast MAC address filtering Support the PMD function "set_mc_addr_list" in the "igb", "igb-vf", and "em" Poll Mode Drivers. Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
2015-05-28 15:05:21 +00:00
.set_mc_addr_list = eth_igb_set_mc_addr_list,
e1000: get queue info and descriptor limits Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Acked-by: Remy Horton <remy.horton@intel.com>
2015-10-27 12:51:46 +00:00
.rxq_info_get = igb_rxq_info_get,
.txq_info_get = igb_txq_info_get,
e1000: add ieee1588 timestamping Add e1000/igb support for new ethdev APIs to enable and read IEEE1588 PTP timestamps. Signed-off-by: John McNamara <john.mcnamara@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2015-07-02 15:16:29 +00:00
.timesync_enable = igb_timesync_enable,
.timesync_disable = igb_timesync_disable,
.timesync_read_rx_timestamp = igb_timesync_read_rx_timestamp,
.timesync_read_tx_timestamp = igb_timesync_read_tx_timestamp,
igb: add access to specific device info add function to support ethtool ops: - get_reg_length - get_regs - get_eeprom_length - get_eeprom - set_eeprom Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com> Acked-by: Andrew Harvey <agh@cisco.com> Acked-by: David Harton <dharton@cisco.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-07-16 13:25:36 +00:00
.get_reg = eth_igb_get_regs,
.get_eeprom_length = eth_igb_get_eeprom_length,
.get_eeprom = eth_igb_get_eeprom,
.set_eeprom = eth_igb_set_eeprom,
igb: support ieee1588 functions for device time Add additional functions to support the existing IEEE1588 functionality and to enable getting, setting and adjusting the device time. Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com> Reviewed-by: John McNamara <john.mcnamara@intel.com>
2015-11-13 16:09:10 +00:00
.timesync_adjust_time = igb_timesync_adjust_time,
.timesync_read_time = igb_timesync_read_time,
.timesync_write_time = igb_timesync_write_time,
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
};
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
/*
* dev_ops for virtual function, bare necessities for basic vf
* operation have been implemented
*/
ethdev: make dev_ops const The ethernet device ops function table should be made const for safety and security. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Neil Horman <nhorman@tuxdriver.com>
2015-04-07 21:21:03 +00:00
static const struct eth_dev_ops igbvf_eth_dev_ops = {
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
.dev_configure = igbvf_dev_configure,
.dev_start = igbvf_dev_start,
.dev_stop = igbvf_dev_stop,
.dev_close = igbvf_dev_close,
e1000: support VF promiscuous and allmulticast Enable promiscuous and allmulticast mode control from the VF using rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() and rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable(). For promiscuous mode host/PF igb driver should be built with IGB_ENABLE_VF_PROMISC. For allmulticast mode "allmulti" flag should be set for appropriate PF ifconfig eth0 allmulti Signed-off-by: Yury Kylulin <yury.kylulin@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2016-02-09 09:09:43 +00:00
.promiscuous_enable = igbvf_promiscuous_enable,
.promiscuous_disable = igbvf_promiscuous_disable,
.allmulticast_enable = igbvf_allmulticast_enable,
.allmulticast_disable = igbvf_allmulticast_disable,
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
.link_update = eth_igb_link_update,
.stats_get = eth_igbvf_stats_get,
igbvf: add extended stats Add xstats functionality to igbvf PMD, adding necessary statistic strings. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-11-02 10:19:02 +00:00
.xstats_get = eth_igbvf_xstats_get,
net/igb: fetch extended statistics with integer ids The current extended ethernet statistics fetching involve doing several string operations, which causes performance issues if there are lots of statistics and/or network interfaces. This patch changes the e1000 driver to use the new API that seperates name string and value queries. Signed-off-by: Remy Horton <remy.horton@intel.com>
2016-06-15 15:25:29 +00:00
.xstats_get_names = eth_igbvf_xstats_get_names,
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
.stats_reset = eth_igbvf_stats_reset,
igbvf: add extended stats Add xstats functionality to igbvf PMD, adding necessary statistic strings. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-11-02 10:19:02 +00:00
.xstats_reset = eth_igbvf_stats_reset,
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
.vlan_filter_set = igbvf_vlan_filter_set,
igb: add redirection table size in device info As more and more information are different between PF and VF, ops of 'dev_infos_get' has been implemented respectively. In addition, new field of 'reta_size' has been added in 'struct rte_eth_dev_info' for returning redirection table size. Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-11-15 16:03:40 +00:00
.dev_infos_get = eth_igbvf_infos_get,
ethdev: query supported packet types Add a new API rte_eth_dev_get_supported_ptypes to query what packet types can be filled by a given device. The device should be already started or its PMD RX burst function already decided, since the packet types supported may vary depending on RX function. Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
2016-03-14 20:50:50 +00:00
.dev_supported_ptypes_get = eth_igb_supported_ptypes_get,
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
.rx_queue_setup = eth_igb_rx_queue_setup,
.rx_queue_release = eth_igb_rx_queue_release,
.tx_queue_setup = eth_igb_tx_queue_setup,
.tx_queue_release = eth_igb_tx_queue_release,
e1000: add multicast MAC address filtering Support the PMD function "set_mc_addr_list" in the "igb", "igb-vf", and "em" Poll Mode Drivers. Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
2015-05-28 15:05:21 +00:00
.set_mc_addr_list = eth_igb_set_mc_addr_list,
e1000: get queue info and descriptor limits Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Acked-by: Remy Horton <remy.horton@intel.com>
2015-10-27 12:51:46 +00:00
.rxq_info_get = igb_rxq_info_get,
.txq_info_get = igb_txq_info_get,
igb: add default mac address modifier - set_mac_addr Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com> Acked-by: Andrew Harvey <agh@cisco.com> Acked-by: David Harton <dharton@cisco.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-07-16 13:25:36 +00:00
.mac_addr_set = igbvf_default_mac_addr_set,
igb: add access to specific device info add function to support ethtool ops: - get_reg_length - get_regs - get_eeprom_length - get_eeprom - set_eeprom Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com> Acked-by: Andrew Harvey <agh@cisco.com> Acked-by: David Harton <dharton@cisco.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-07-16 13:25:36 +00:00
.get_reg = igbvf_get_regs,
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
};
igb: add extended stats Add xstats_get() and xstats_reset() functions to igb driver, and the necessary strings to expose these NIC statistics. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-11-02 10:19:01 +00:00
/* store statistics names and its offset in stats structure */
struct rte_igb_xstats_name_off {
char name[RTE_ETH_XSTATS_NAME_SIZE];
unsigned offset;
};
static const struct rte_igb_xstats_name_off rte_igb_stats_strings[] = {
{"rx_crc_errors", offsetof(struct e1000_hw_stats, crcerrs)},
{"rx_align_errors", offsetof(struct e1000_hw_stats, algnerrc)},
{"rx_symbol_errors", offsetof(struct e1000_hw_stats, symerrs)},
{"rx_missed_packets", offsetof(struct e1000_hw_stats, mpc)},
{"tx_single_collision_packets", offsetof(struct e1000_hw_stats, scc)},
{"tx_multiple_collision_packets", offsetof(struct e1000_hw_stats, mcc)},
{"tx_excessive_collision_packets", offsetof(struct e1000_hw_stats,
ecol)},
{"tx_late_collisions", offsetof(struct e1000_hw_stats, latecol)},
{"tx_total_collisions", offsetof(struct e1000_hw_stats, colc)},
{"tx_deferred_packets", offsetof(struct e1000_hw_stats, dc)},
{"tx_no_carrier_sense_packets", offsetof(struct e1000_hw_stats, tncrs)},
{"rx_carrier_ext_errors", offsetof(struct e1000_hw_stats, cexterr)},
{"rx_length_errors", offsetof(struct e1000_hw_stats, rlec)},
{"rx_xon_packets", offsetof(struct e1000_hw_stats, xonrxc)},
{"tx_xon_packets", offsetof(struct e1000_hw_stats, xontxc)},
{"rx_xoff_packets", offsetof(struct e1000_hw_stats, xoffrxc)},
{"tx_xoff_packets", offsetof(struct e1000_hw_stats, xofftxc)},
{"rx_flow_control_unsupported_packets", offsetof(struct e1000_hw_stats,
fcruc)},
{"rx_size_64_packets", offsetof(struct e1000_hw_stats, prc64)},
{"rx_size_65_to_127_packets", offsetof(struct e1000_hw_stats, prc127)},
{"rx_size_128_to_255_packets", offsetof(struct e1000_hw_stats, prc255)},
{"rx_size_256_to_511_packets", offsetof(struct e1000_hw_stats, prc511)},
{"rx_size_512_to_1023_packets", offsetof(struct e1000_hw_stats,
prc1023)},
{"rx_size_1024_to_max_packets", offsetof(struct e1000_hw_stats,
prc1522)},
{"rx_broadcast_packets", offsetof(struct e1000_hw_stats, bprc)},
{"rx_multicast_packets", offsetof(struct e1000_hw_stats, mprc)},
{"rx_undersize_errors", offsetof(struct e1000_hw_stats, ruc)},
{"rx_fragment_errors", offsetof(struct e1000_hw_stats, rfc)},
{"rx_oversize_errors", offsetof(struct e1000_hw_stats, roc)},
{"rx_jabber_errors", offsetof(struct e1000_hw_stats, rjc)},
{"rx_management_packets", offsetof(struct e1000_hw_stats, mgprc)},
{"rx_management_dropped", offsetof(struct e1000_hw_stats, mgpdc)},
{"tx_management_packets", offsetof(struct e1000_hw_stats, mgptc)},
{"rx_total_packets", offsetof(struct e1000_hw_stats, tpr)},
{"tx_total_packets", offsetof(struct e1000_hw_stats, tpt)},
{"rx_total_bytes", offsetof(struct e1000_hw_stats, tor)},
{"tx_total_bytes", offsetof(struct e1000_hw_stats, tot)},
{"tx_size_64_packets", offsetof(struct e1000_hw_stats, ptc64)},
{"tx_size_65_to_127_packets", offsetof(struct e1000_hw_stats, ptc127)},
{"tx_size_128_to_255_packets", offsetof(struct e1000_hw_stats, ptc255)},
{"tx_size_256_to_511_packets", offsetof(struct e1000_hw_stats, ptc511)},
{"tx_size_512_to_1023_packets", offsetof(struct e1000_hw_stats,
ptc1023)},
{"tx_size_1023_to_max_packets", offsetof(struct e1000_hw_stats,
ptc1522)},
{"tx_multicast_packets", offsetof(struct e1000_hw_stats, mptc)},
{"tx_broadcast_packets", offsetof(struct e1000_hw_stats, bptc)},
{"tx_tso_packets", offsetof(struct e1000_hw_stats, tsctc)},
{"tx_tso_errors", offsetof(struct e1000_hw_stats, tsctfc)},
{"rx_sent_to_host_packets", offsetof(struct e1000_hw_stats, rpthc)},
{"tx_sent_by_host_packets", offsetof(struct e1000_hw_stats, hgptc)},
{"rx_code_violation_packets", offsetof(struct e1000_hw_stats, scvpc)},
{"interrupt_assert_count", offsetof(struct e1000_hw_stats, iac)},
};
#define IGB_NB_XSTATS (sizeof(rte_igb_stats_strings) / \
sizeof(rte_igb_stats_strings[0]))
igbvf: add extended stats Add xstats functionality to igbvf PMD, adding necessary statistic strings. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-11-02 10:19:02 +00:00
static const struct rte_igb_xstats_name_off rte_igbvf_stats_strings[] = {
{"rx_multicast_packets", offsetof(struct e1000_vf_stats, mprc)},
{"rx_good_loopback_packets", offsetof(struct e1000_vf_stats, gprlbc)},
{"tx_good_loopback_packets", offsetof(struct e1000_vf_stats, gptlbc)},
{"rx_good_loopback_bytes", offsetof(struct e1000_vf_stats, gorlbc)},
{"tx_good_loopback_bytes", offsetof(struct e1000_vf_stats, gotlbc)},
};
#define IGBVF_NB_XSTATS (sizeof(rte_igbvf_stats_strings) / \
sizeof(rte_igbvf_stats_strings[0]))
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
/**
* Atomically reads the link status information from global
* structure rte_eth_dev.
*
* @param dev
* - Pointer to the structure rte_eth_dev to read from.
* - Pointer to the buffer to be saved with the link status.
*
* @return
* - On success, zero.
* - On failure, negative value.
*/
static inline int
rte_igb_dev_atomic_read_link_status(struct rte_eth_dev *dev,
struct rte_eth_link *link)
{
struct rte_eth_link *dst = link;
struct rte_eth_link *src = &(dev->data->dev_link);
if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
*(uint64_t *)src) == 0)
return -1;
return 0;
}
/**
* Atomically writes the link status information into global
* structure rte_eth_dev.
*
* @param dev
* - Pointer to the structure rte_eth_dev to read from.
* - Pointer to the buffer to be saved with the link status.
*
* @return
* - On success, zero.
* - On failure, negative value.
*/
static inline int
rte_igb_dev_atomic_write_link_status(struct rte_eth_dev *dev,
struct rte_eth_link *link)
{
struct rte_eth_link *dst = &(dev->data->dev_link);
struct rte_eth_link *src = link;
if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
*(uint64_t *)src) == 0)
return -1;
return 0;
}
pci: rework interrupt handling Signed-off-by: Intel <intel.com>
2013-06-03 00:00:00 +00:00
static inline void
igb_intr_enable(struct rte_eth_dev *dev)
{
struct e1000_interrupt *intr =
E1000_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
remove trailing whitespaces This commit removes trailing whitespace from lines in files. Almost all files are affected, as the BSD license copyright header had trailing whitespace on 4 lines in it [hence the number of files reporting 8 lines changed in the diffstat]. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> [Thomas: remove spaces before tabs in libs] [Thomas: remove more trailing spaces in non-C files] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-03 23:42:50 +00:00
pci: rework interrupt handling Signed-off-by: Intel <intel.com>
2013-06-03 00:00:00 +00:00
E1000_WRITE_REG(hw, E1000_IMS, intr->mask);
E1000_WRITE_FLUSH(hw);
}
static void
igb_intr_disable(struct e1000_hw *hw)
{
E1000_WRITE_REG(hw, E1000_IMC, ~0);
E1000_WRITE_FLUSH(hw);
}
net/igb: support VF mailbox interrupt for link up/down When using kernel PF and DPDK VF, when the PF driver finds the link state changes, up -> down or down -> up, the driver will send a message to VF by mailbox. This link state change may be triggered by PHY disconnection/reconnection, user config change like *ifconfig down/up* or interface parameter, like MTU change. This patch enables the support of the mailbox interrupt, so VF driver can receive the message for link up/down. After VF receives this message, VF port need to be reset to recover. This needs to be handled by the application so this patch allows the app to register a reset callback so it can reset the VF port. Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Jingjing Wu <jingjing.wu@intel.com>
2016-06-01 01:53:09 +00:00
static inline void
igbvf_intr_enable(struct rte_eth_dev *dev)
{
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
/* only for mailbox */
E1000_WRITE_REG(hw, E1000_EIAM, 1 << E1000_VTIVAR_MISC_MAILBOX);
E1000_WRITE_REG(hw, E1000_EIAC, 1 << E1000_VTIVAR_MISC_MAILBOX);
E1000_WRITE_REG(hw, E1000_EIMS, 1 << E1000_VTIVAR_MISC_MAILBOX);
E1000_WRITE_FLUSH(hw);
}
/* only for mailbox now. If RX/TX needed, should extend this function. */
static void
igbvf_set_ivar_map(struct e1000_hw *hw, uint8_t msix_vector)
{
uint32_t tmp = 0;
/* mailbox */
tmp |= (msix_vector & E1000_VTIVAR_MISC_INTR_MASK);
tmp |= E1000_VTIVAR_VALID;
E1000_WRITE_REG(hw, E1000_VTIVAR_MISC, tmp);
}
static void
eth_igbvf_configure_msix_intr(struct rte_eth_dev *dev)
{
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
/* Configure VF other cause ivar */
igbvf_set_ivar_map(hw, E1000_VTIVAR_MISC_MAILBOX);
}
igb: add PF support Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
static inline int32_t
igb_pf_reset_hw(struct e1000_hw *hw)
{
uint32_t ctrl_ext;
int32_t status;
remove trailing whitespaces This commit removes trailing whitespace from lines in files. Almost all files are affected, as the BSD license copyright header had trailing whitespace on 4 lines in it [hence the number of files reporting 8 lines changed in the diffstat]. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> [Thomas: remove spaces before tabs in libs] [Thomas: remove more trailing spaces in non-C files] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-03 23:42:50 +00:00
igb: add PF support Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
status = e1000_reset_hw(hw);
remove trailing whitespaces This commit removes trailing whitespace from lines in files. Almost all files are affected, as the BSD license copyright header had trailing whitespace on 4 lines in it [hence the number of files reporting 8 lines changed in the diffstat]. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> [Thomas: remove spaces before tabs in libs] [Thomas: remove more trailing spaces in non-C files] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-03 23:42:50 +00:00
igb: add PF support Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
/* Set PF Reset Done bit so PF/VF Mail Ops can work */
ctrl_ext |= E1000_CTRL_EXT_PFRSTD;
E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
E1000_WRITE_FLUSH(hw);
remove trailing whitespaces This commit removes trailing whitespace from lines in files. Almost all files are affected, as the BSD license copyright header had trailing whitespace on 4 lines in it [hence the number of files reporting 8 lines changed in the diffstat]. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> [Thomas: remove spaces before tabs in libs] [Thomas: remove more trailing spaces in non-C files] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-03 23:42:50 +00:00
igb: add PF support Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
return status;
}
remove trailing whitespaces This commit removes trailing whitespace from lines in files. Almost all files are affected, as the BSD license copyright header had trailing whitespace on 4 lines in it [hence the number of files reporting 8 lines changed in the diffstat]. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> [Thomas: remove spaces before tabs in libs] [Thomas: remove more trailing spaces in non-C files] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-03 23:42:50 +00:00
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
static void
net/e1000: localize mapping of ethdev to PCI device Create one macro for where PCI device information is extracted from ethernet device. Makes later changes easier to review, and test. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jan Blunck <jblunck@infradead.org>
2016-12-23 15:57:56 +00:00
igb_identify_hardware(struct rte_eth_dev *dev, struct rte_pci_device *pci_dev)
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
{
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
net/e1000: localize mapping of ethdev to PCI device Create one macro for where PCI device information is extracted from ethernet device. Makes later changes easier to review, and test. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jan Blunck <jblunck@infradead.org>
2016-12-23 15:57:56 +00:00
hw->vendor_id = pci_dev->id.vendor_id;
hw->device_id = pci_dev->id.device_id;
hw->subsystem_vendor_id = pci_dev->id.subsystem_vendor_id;
hw->subsystem_device_id = pci_dev->id.subsystem_device_id;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
e1000_set_mac_type(hw);
/* need to check if it is a vf device below */
}
igb: release software locked semaphores on initialization It may happen that DPDK application gets killed while having acquired locks on the ethernet hardware, causing these locks to be never released. On next restart of the application, DPDK skip those ports because it can not acquire the lock, this may cause some ports (or even complete board if SMBI is locked) to be inaccessible from DPDK application until reboot of the hardware. This patch release locks that are supposed to be locked due to an improper exit of the application. Signed-off-by: Didier Pallard <didier.pallard@6wind.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-04-08 13:29:58 +00:00
static int
igb_reset_swfw_lock(struct e1000_hw *hw)
{
int ret_val;
/*
* Do mac ops initialization manually here, since we will need
* some function pointers set by this call.
*/
ret_val = e1000_init_mac_params(hw);
if (ret_val)
return ret_val;
/*
* SMBI lock should not fail in this early stage. If this is the case,
* it is due to an improper exit of the application.
* So force the release of the faulty lock.
*/
if (e1000_get_hw_semaphore_generic(hw) < 0) {
e1000: use the right debug macro - We should not use DEBUGOUT* / DEBUGFUNC macros in pmd. These macros come as compat wrappers for base driver. - We should avoid calling RTE_LOG directly as pmd provides a wrapper for logs. Signed-off-by: David Marchand <david.marchand@6wind.com> Reviewed-by: Jay Rolette <rolette@infiniteio.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2014-09-17 13:46:46 +00:00
PMD_DRV_LOG(DEBUG, "SMBI lock released");
igb: release software locked semaphores on initialization It may happen that DPDK application gets killed while having acquired locks on the ethernet hardware, causing these locks to be never released. On next restart of the application, DPDK skip those ports because it can not acquire the lock, this may cause some ports (or even complete board if SMBI is locked) to be inaccessible from DPDK application until reboot of the hardware. This patch release locks that are supposed to be locked due to an improper exit of the application. Signed-off-by: Didier Pallard <didier.pallard@6wind.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-04-08 13:29:58 +00:00
}
e1000_put_hw_semaphore_generic(hw);
if (hw->mac.ops.acquire_swfw_sync != NULL) {
uint16_t mask;
/*
* Phy lock should not fail in this early stage. If this is the case,
* it is due to an improper exit of the application.
* So force the release of the faulty lock.
*/
mask = E1000_SWFW_PHY0_SM << hw->bus.func;
if (hw->bus.func > E1000_FUNC_1)
mask <<= 2;
if (hw->mac.ops.acquire_swfw_sync(hw, mask) < 0) {
e1000: use the right debug macro - We should not use DEBUGOUT* / DEBUGFUNC macros in pmd. These macros come as compat wrappers for base driver. - We should avoid calling RTE_LOG directly as pmd provides a wrapper for logs. Signed-off-by: David Marchand <david.marchand@6wind.com> Reviewed-by: Jay Rolette <rolette@infiniteio.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2014-09-17 13:46:46 +00:00
PMD_DRV_LOG(DEBUG, "SWFW phy%d lock released",
hw->bus.func);
igb: release software locked semaphores on initialization It may happen that DPDK application gets killed while having acquired locks on the ethernet hardware, causing these locks to be never released. On next restart of the application, DPDK skip those ports because it can not acquire the lock, this may cause some ports (or even complete board if SMBI is locked) to be inaccessible from DPDK application until reboot of the hardware. This patch release locks that are supposed to be locked due to an improper exit of the application. Signed-off-by: Didier Pallard <didier.pallard@6wind.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-04-08 13:29:58 +00:00
}
hw->mac.ops.release_swfw_sync(hw, mask);
/*
* This one is more tricky since it is common to all ports; but
* swfw_sync retries last long enough (1s) to be almost sure that if
* lock can not be taken it is due to an improper lock of the
* semaphore.
*/
mask = E1000_SWFW_EEP_SM;
if (hw->mac.ops.acquire_swfw_sync(hw, mask) < 0) {
e1000: use the right debug macro - We should not use DEBUGOUT* / DEBUGFUNC macros in pmd. These macros come as compat wrappers for base driver. - We should avoid calling RTE_LOG directly as pmd provides a wrapper for logs. Signed-off-by: David Marchand <david.marchand@6wind.com> Reviewed-by: Jay Rolette <rolette@infiniteio.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2014-09-17 13:46:46 +00:00
PMD_DRV_LOG(DEBUG, "SWFW common locks released");
igb: release software locked semaphores on initialization It may happen that DPDK application gets killed while having acquired locks on the ethernet hardware, causing these locks to be never released. On next restart of the application, DPDK skip those ports because it can not acquire the lock, this may cause some ports (or even complete board if SMBI is locked) to be inaccessible from DPDK application until reboot of the hardware. This patch release locks that are supposed to be locked due to an improper exit of the application. Signed-off-by: Didier Pallard <didier.pallard@6wind.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-04-08 13:29:58 +00:00
}
hw->mac.ops.release_swfw_sync(hw, mask);
}
return E1000_SUCCESS;
}
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
static int
ethdev: remove useless parameter in init functions The pointer to struct eth_driver is not used and is already set in struct rte_eth_dev. It's a small cleanup in PMD API which probably needs more attention to make clear what is a driver, a PCI driver, an ethernet driver, etc. Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2015-03-05 18:24:59 +00:00
eth_igb_dev_init(struct rte_eth_dev *eth_dev)
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
{
int error = 0;
net/e1000: localize mapping of ethdev to PCI device Create one macro for where PCI device information is extracted from ethernet device. Makes later changes easier to review, and test. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jan Blunck <jblunck@infradead.org>
2016-12-23 15:57:56 +00:00
struct rte_pci_device *pci_dev = E1000_DEV_TO_PCI(eth_dev);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
struct e1000_vfta * shadow_vfta =
e1000: support port hotplug This patch depends on the Port Hotplug Framework. It implements the eth_dev_uninit functions for rte_em_pmd, rte_igb_pmd and rte_igbvf_pmd. Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-07-03 14:38:26 +00:00
E1000_DEV_PRIVATE_TO_VFTA(eth_dev->data->dev_private);
igb: migrate flex filter to new API This patch defines new functions dealing with flex filter. It removes old functions of flex filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-21 01:53:08 +00:00
struct e1000_filter_info *filter_info =
E1000_DEV_PRIVATE_TO_FILTER_INFO(eth_dev->data->dev_private);
e1000: support port hotplug This patch depends on the Port Hotplug Framework. It implements the eth_dev_uninit functions for rte_em_pmd, rte_igb_pmd and rte_igbvf_pmd. Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-07-03 14:38:26 +00:00
struct e1000_adapter *adapter =
E1000_DEV_PRIVATE(eth_dev->data->dev_private);
igb: add PF support Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
uint32_t ctrl_ext;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
eth_dev->dev_ops = &eth_igb_ops;
eth_dev->rx_pkt_burst = &eth_igb_recv_pkts;
eth_dev->tx_pkt_burst = &eth_igb_xmit_pkts;
net/e1000: add Tx preparation Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2016-12-23 18:40:48 +00:00
eth_dev->tx_pkt_prepare = &eth_igb_prep_pkts;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
/* for secondary processes, we don't initialise any further as primary
* has already done this work. Only check we don't need a different
* RX function */
if (rte_eal_process_type() != RTE_PROC_PRIMARY){
if (eth_dev->data->scattered_rx)
eth_dev->rx_pkt_burst = &eth_igb_recv_scattered_pkts;
return 0;
}
e1000: fix PCI device info with secondary process This fixes a bug added to em and igb drivers which causes the pci info seen by the primary process to become invalidated by secondary process startup. This call was added after the process type check in the other drivers. Fixes: eeefe73f0af1 ("drivers: copy PCI device info to ethdev data") Signed-off-by: Jon DeVree <nuxi@vault24.org> Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
2015-11-23 15:13:53 +00:00
rte_eth_copy_pci_info(eth_dev, pci_dev);
drivers/net: fix device configuration dev_flags is wrongly overwritten with RTE_ETH_DEV_DETACHABLE value in drivers after rte_eth_copy_pci_info(). Previous values of the dev_flags set in rte_eth_copy_pci_info(), like RTE_ETH_DEV_INTR_LSC, are get lost. That will fail the device configuration. Fix by preventing dev_flags overwritten. Fixes: 22dda618c00c ("pci: separate detaching ethernet ports from PCI devices") Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Signed-off-by: Jeff Guo <jia.guo@intel.com>
2017-02-08 09:50:16 +00:00
eth_dev->data->dev_flags |= RTE_ETH_DEV_DETACHABLE;
e1000: fix PCI device info with secondary process This fixes a bug added to em and igb drivers which causes the pci info seen by the primary process to become invalidated by secondary process startup. This call was added after the process type check in the other drivers. Fixes: eeefe73f0af1 ("drivers: copy PCI device info to ethdev data") Signed-off-by: Jon DeVree <nuxi@vault24.org> Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
2015-11-23 15:13:53 +00:00
pci: support multiple PCI regions per device Need to change PCI code to support multiple I/O regions on a single device. Some devices like VMXNET3 have multiple PCI memory regions, and some have none. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Intel
2013-05-30 17:12:39 +00:00
hw->hw_addr= (void *)pci_dev->mem_resource[0].addr;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
net/e1000: localize mapping of ethdev to PCI device Create one macro for where PCI device information is extracted from ethernet device. Makes later changes easier to review, and test. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jan Blunck <jblunck@infradead.org>
2016-12-23 15:57:56 +00:00
igb_identify_hardware(eth_dev, pci_dev);
igb: release software locked semaphores on initialization It may happen that DPDK application gets killed while having acquired locks on the ethernet hardware, causing these locks to be never released. On next restart of the application, DPDK skip those ports because it can not acquire the lock, this may cause some ports (or even complete board if SMBI is locked) to be inaccessible from DPDK application until reboot of the hardware. This patch release locks that are supposed to be locked due to an improper exit of the application. Signed-off-by: Didier Pallard <didier.pallard@6wind.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-04-08 13:29:58 +00:00
if (e1000_setup_init_funcs(hw, FALSE) != E1000_SUCCESS) {
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
error = -EIO;
goto err_late;
}
e1000_get_bus_info(hw);
igb: release software locked semaphores on initialization It may happen that DPDK application gets killed while having acquired locks on the ethernet hardware, causing these locks to be never released. On next restart of the application, DPDK skip those ports because it can not acquire the lock, this may cause some ports (or even complete board if SMBI is locked) to be inaccessible from DPDK application until reboot of the hardware. This patch release locks that are supposed to be locked due to an improper exit of the application. Signed-off-by: Didier Pallard <didier.pallard@6wind.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-04-08 13:29:58 +00:00
/* Reset any pending lock */
if (igb_reset_swfw_lock(hw) != E1000_SUCCESS) {
error = -EIO;
goto err_late;
}
/* Finish initialization */
if (e1000_setup_init_funcs(hw, TRUE) != E1000_SUCCESS) {
error = -EIO;
goto err_late;
}
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
hw->mac.autoneg = 1;
hw->phy.autoneg_wait_to_complete = 0;
hw->phy.autoneg_advertised = E1000_ALL_SPEED_DUPLEX;
/* Copper options */
if (hw->phy.media_type == e1000_media_type_copper) {
hw->phy.mdix = 0; /* AUTO_ALL_MODES */
hw->phy.disable_polarity_correction = 0;
hw->phy.ms_type = e1000_ms_hw_default;
}
/*
* Start from a known state, this is important in reading the nvm
* and mac from that.
*/
igb: add PF support Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
igb_pf_reset_hw(hw);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
/* Make sure we have a good EEPROM before we read from it */
if (e1000_validate_nvm_checksum(hw) < 0) {
/*
* Some PCI-E parts fail the first check due to
* the link being in sleep state, call it again,
* if it fails a second time its a real issue.
*/
if (e1000_validate_nvm_checksum(hw) < 0) {
PMD_INIT_LOG(ERR, "EEPROM checksum invalid");
error = -EIO;
goto err_late;
}
}
/* Read the permanent MAC address out of the EEPROM */
if (e1000_read_mac_addr(hw) != 0) {
PMD_INIT_LOG(ERR, "EEPROM error while reading MAC address");
error = -EIO;
goto err_late;
}
/* Allocate memory for storing MAC addresses */
eth_dev->data->mac_addrs = rte_zmalloc("e1000",
ETHER_ADDR_LEN * hw->mac.rar_entry_count, 0);
if (eth_dev->data->mac_addrs == NULL) {
PMD_INIT_LOG(ERR, "Failed to allocate %d bytes needed to "
"store MAC addresses",
ETHER_ADDR_LEN * hw->mac.rar_entry_count);
error = -ENOMEM;
goto err_late;
}
/* Copy the permanent MAC address */
ether_addr_copy((struct ether_addr *)hw->mac.addr, &eth_dev->data->mac_addrs[0]);
/* initialize the vfta */
memset(shadow_vfta, 0, sizeof(*shadow_vfta));
/* Now initialize the hardware */
if (igb_hardware_init(hw) != 0) {
PMD_INIT_LOG(ERR, "Hardware initialization failed");
rte_free(eth_dev->data->mac_addrs);
eth_dev->data->mac_addrs = NULL;
error = -ENODEV;
goto err_late;
}
hw->mac.get_link_status = 1;
e1000: support port hotplug This patch depends on the Port Hotplug Framework. It implements the eth_dev_uninit functions for rte_em_pmd, rte_igb_pmd and rte_igbvf_pmd. Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-07-03 14:38:26 +00:00
adapter->stopped = 0;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
/* Indicate SOL/IDER usage */
if (e1000_check_reset_block(hw) < 0) {
PMD_INIT_LOG(ERR, "PHY reset is blocked due to"
"SOL/IDER session");
}
igb: add PF support Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
/* initialize PF if max_vfs not zero */
igb_pf_host_init(eth_dev);
remove trailing whitespaces This commit removes trailing whitespace from lines in files. Almost all files are affected, as the BSD license copyright header had trailing whitespace on 4 lines in it [hence the number of files reporting 8 lines changed in the diffstat]. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> [Thomas: remove spaces before tabs in libs] [Thomas: remove more trailing spaces in non-C files] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-03 23:42:50 +00:00
igb: add PF support Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
/* Set PF Reset Done bit so PF/VF Mail Ops can work */
ctrl_ext |= E1000_CTRL_EXT_PFRSTD;
E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
E1000_WRITE_FLUSH(hw);
e1000: fix log level of debug messages Any debug messages about hardware should be under debug (or removed) and reduce customer visible log spam. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2015-07-09 23:01:07 +00:00
PMD_INIT_LOG(DEBUG, "port_id %d vendorID=0x%x deviceID=0x%x",
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
eth_dev->data->port_id, pci_dev->id.vendor_id,
pci_dev->id.device_id);
igb: fix VF start with PF stopped When igb runs as a PF, mbox interrupt is prerequisite to make VF start normally. And PF sometimes won't 'dev_start', so the mbox interrupt register during 'dev_init' is required. The patch rolls back the interrupt register for mbox,lsc to the 'dev_init'. As UIO doesn't support multiple vector, mbox has to occupy the only one. It adds condition check on 'dev_start', rxq interrupt is not allowed when PF running in IOV mode via UIO. Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-11-04 08:45:38 +00:00
rte_intr_callback_register(&pci_dev->intr_handle,
eth_igb_interrupt_handler,
(void *)eth_dev);
/* enable uio/vfio intr/eventfd mapping */
rte_intr_enable(&pci_dev->intr_handle);
pci: rework interrupt handling Signed-off-by: Intel <intel.com>
2013-06-03 00:00:00 +00:00
/* enable support intr */
igb_intr_enable(eth_dev);
remove trailing whitespaces This commit removes trailing whitespace from lines in files. Almost all files are affected, as the BSD license copyright header had trailing whitespace on 4 lines in it [hence the number of files reporting 8 lines changed in the diffstat]. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> [Thomas: remove spaces before tabs in libs] [Thomas: remove more trailing spaces in non-C files] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-03 23:42:50 +00:00
igb: migrate flex filter to new API This patch defines new functions dealing with flex filter. It removes old functions of flex filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-21 01:53:08 +00:00
TAILQ_INIT(&filter_info->flex_list);
filter_info->flex_mask = 0;
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
TAILQ_INIT(&filter_info->twotuple_list);
filter_info->twotuple_mask = 0;
TAILQ_INIT(&filter_info->fivetuple_list);
filter_info->fivetuple_mask = 0;
igb: migrate flex filter to new API This patch defines new functions dealing with flex filter. It removes old functions of flex filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-21 01:53:08 +00:00
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
return 0;
err_late:
igb_hw_control_release(hw);
remove extra parentheses in return statement fix the error reported by checkpatch: "ERROR: return is not a function, parentheses are not required" remove parentheses in return like: "return (logical expressions)" remove parentheses in return a function like: "return (rte_mempool_lookup(...))" Fixes: 6307b909b8e0 ("lib: remove extra parenthesis after return") Signed-off-by: Huawei Xie <huawei.xie@intel.com>
2016-01-27 13:58:30 +00:00
return error;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
}
e1000: support port hotplug This patch depends on the Port Hotplug Framework. It implements the eth_dev_uninit functions for rte_em_pmd, rte_igb_pmd and rte_igbvf_pmd. Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-07-03 14:38:26 +00:00
static int
eth_igb_dev_uninit(struct rte_eth_dev *eth_dev)
{
struct rte_pci_device *pci_dev;
net/e1000: localize mapping of ethdev to PCI device Create one macro for where PCI device information is extracted from ethernet device. Makes later changes easier to review, and test. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jan Blunck <jblunck@infradead.org>
2016-12-23 15:57:56 +00:00
struct rte_intr_handle *intr_handle;
e1000: support port hotplug This patch depends on the Port Hotplug Framework. It implements the eth_dev_uninit functions for rte_em_pmd, rte_igb_pmd and rte_igbvf_pmd. Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-07-03 14:38:26 +00:00
struct e1000_hw *hw;
struct e1000_adapter *adapter =
E1000_DEV_PRIVATE(eth_dev->data->dev_private);
PMD_INIT_FUNC_TRACE();
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
return -EPERM;
hw = E1000_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
net/e1000: localize mapping of ethdev to PCI device Create one macro for where PCI device information is extracted from ethernet device. Makes later changes easier to review, and test. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jan Blunck <jblunck@infradead.org>
2016-12-23 15:57:56 +00:00
pci_dev = E1000_DEV_TO_PCI(eth_dev);
intr_handle = &pci_dev->intr_handle;
e1000: support port hotplug This patch depends on the Port Hotplug Framework. It implements the eth_dev_uninit functions for rte_em_pmd, rte_igb_pmd and rte_igbvf_pmd. Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-07-03 14:38:26 +00:00
if (adapter->stopped == 0)
eth_igb_close(eth_dev);
eth_dev->dev_ops = NULL;
eth_dev->rx_pkt_burst = NULL;
eth_dev->tx_pkt_burst = NULL;
/* Reset any pending lock */
igb_reset_swfw_lock(hw);
rte_free(eth_dev->data->mac_addrs);
eth_dev->data->mac_addrs = NULL;
/* uninitialize PF if max_vfs not zero */
igb_pf_host_uninit(eth_dev);
/* disable uio intr before callback unregister */
net/e1000: localize mapping of ethdev to PCI device Create one macro for where PCI device information is extracted from ethernet device. Makes later changes easier to review, and test. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jan Blunck <jblunck@infradead.org>
2016-12-23 15:57:56 +00:00
rte_intr_disable(intr_handle);
rte_intr_callback_unregister(intr_handle,
eth_igb_interrupt_handler, eth_dev);
e1000: support port hotplug This patch depends on the Port Hotplug Framework. It implements the eth_dev_uninit functions for rte_em_pmd, rte_igb_pmd and rte_igbvf_pmd. Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-07-03 14:38:26 +00:00
return 0;
}
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
/*
* Virtual Function device init
*/
static int
ethdev: remove useless parameter in init functions The pointer to struct eth_driver is not used and is already set in struct rte_eth_dev. It's a small cleanup in PMD API which probably needs more attention to make clear what is a driver, a PCI driver, an ethernet driver, etc. Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2015-03-05 18:24:59 +00:00
eth_igbvf_dev_init(struct rte_eth_dev *eth_dev)
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
{
struct rte_pci_device *pci_dev;
net/e1000: localize mapping of ethdev to PCI device Create one macro for where PCI device information is extracted from ethernet device. Makes later changes easier to review, and test. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jan Blunck <jblunck@infradead.org>
2016-12-23 15:57:56 +00:00
struct rte_intr_handle *intr_handle;
e1000: support port hotplug This patch depends on the Port Hotplug Framework. It implements the eth_dev_uninit functions for rte_em_pmd, rte_igb_pmd and rte_igbvf_pmd. Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-07-03 14:38:26 +00:00
struct e1000_adapter *adapter =
E1000_DEV_PRIVATE(eth_dev->data->dev_private);
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
int diag;
igbvf: fix MAC address if none assigned by PF If use DPDK PF + DPDK VF on igb NICs, we find the MAC address of VF port is always 0. Because we forget to give it a value if this MAC address is not assigned by PF. This patch'll assign a random MAC address to igb VF port as ixgbe does. Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2015-11-27 06:07:35 +00:00
struct ether_addr *perm_addr = (struct ether_addr *)hw->mac.perm_addr;
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
e1000: clean log messages - remove leading \n in some messages, - remove trailing \n in some messages, - split multi lines messages, - introduce PMD_INIT_FUNC_TRACE macro and use it instead of PMD_INIT_LOG(DEBUG, "some_func") Signed-off-by: David Marchand <david.marchand@6wind.com> Reviewed-by: Jay Rolette <rolette@infiniteio.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2014-09-17 13:46:49 +00:00
PMD_INIT_FUNC_TRACE();
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
eth_dev->dev_ops = &igbvf_eth_dev_ops;
igb: fix VF init without setup In case of multi-process application, the secondary process can initialize the driver without configuring queues. In this case the Rx/Tx functions were not initialized because it was only done in queue setup. Fix by reproducing the same behaviour as in eth_igb_dev_init(). Signed-off-by: Intel
2013-09-18 10:00:00 +00:00
eth_dev->rx_pkt_burst = &eth_igb_recv_pkts;
eth_dev->tx_pkt_burst = &eth_igb_xmit_pkts;
net/e1000: add Tx preparation Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2016-12-23 18:40:48 +00:00
eth_dev->tx_pkt_prepare = &eth_igb_prep_pkts;
igb: fix VF init without setup In case of multi-process application, the secondary process can initialize the driver without configuring queues. In this case the Rx/Tx functions were not initialized because it was only done in queue setup. Fix by reproducing the same behaviour as in eth_igb_dev_init(). Signed-off-by: Intel
2013-09-18 10:00:00 +00:00
/* for secondary processes, we don't initialise any further as primary
* has already done this work. Only check we don't need a different
* RX function */
if (rte_eal_process_type() != RTE_PROC_PRIMARY){
if (eth_dev->data->scattered_rx)
eth_dev->rx_pkt_burst = &eth_igb_recv_scattered_pkts;
return 0;
}
net/e1000: localize mapping of ethdev to PCI device Create one macro for where PCI device information is extracted from ethernet device. Makes later changes easier to review, and test. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jan Blunck <jblunck@infradead.org>
2016-12-23 15:57:56 +00:00
pci_dev = E1000_DEV_TO_PCI(eth_dev);
drivers: copy PCI device info to ethdev data Use new function rte_eth_copy_pci_info. Copy device info for the following pdevs: bnx2x cxgbe e1000 enic fm10k i40e ixgbe mlx4 mlx5 virtio vmxnet3 Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2015-11-03 13:01:56 +00:00
rte_eth_copy_pci_info(eth_dev, pci_dev);
drivers/net: fix device configuration dev_flags is wrongly overwritten with RTE_ETH_DEV_DETACHABLE value in drivers after rte_eth_copy_pci_info(). Previous values of the dev_flags set in rte_eth_copy_pci_info(), like RTE_ETH_DEV_INTR_LSC, are get lost. That will fail the device configuration. Fix by preventing dev_flags overwritten. Fixes: 22dda618c00c ("pci: separate detaching ethernet ports from PCI devices") Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Signed-off-by: Jeff Guo <jia.guo@intel.com>
2017-02-08 09:50:16 +00:00
eth_dev->data->dev_flags |= RTE_ETH_DEV_DETACHABLE;
drivers: copy PCI device info to ethdev data Use new function rte_eth_copy_pci_info. Copy device info for the following pdevs: bnx2x cxgbe e1000 enic fm10k i40e ixgbe mlx4 mlx5 virtio vmxnet3 Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2015-11-03 13:01:56 +00:00
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
hw->device_id = pci_dev->id.device_id;
hw->vendor_id = pci_dev->id.vendor_id;
pci: support multiple PCI regions per device Need to change PCI code to support multiple I/O regions on a single device. Some devices like VMXNET3 have multiple PCI memory regions, and some have none. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Intel
2013-05-30 17:12:39 +00:00
hw->hw_addr = (void *)pci_dev->mem_resource[0].addr;
e1000: support port hotplug This patch depends on the Port Hotplug Framework. It implements the eth_dev_uninit functions for rte_em_pmd, rte_igb_pmd and rte_igbvf_pmd. Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-07-03 14:38:26 +00:00
adapter->stopped = 0;
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
explicit shared code naming as base driver Intel PMDs are built on top of the base drivers which are provided by Intel and shouldn't be modified to allow easy batch upgrade from Intel. The base driver is a "shared code" between many projects. But in DPDK, the "base driver" naming makes more sense. Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2014-06-24 08:03:02 +00:00
/* Initialize the shared code (base driver) */
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
diag = e1000_setup_init_funcs(hw, TRUE);
if (diag != 0) {
PMD_INIT_LOG(ERR, "Shared code init failed for igbvf: %d",
diag);
return -EIO;
}
/* init_mailbox_params */
hw->mbx.ops.init_params(hw);
/* Disable the interrupts for VF */
igbvf_intr_disable(hw);
remove trailing whitespaces This commit removes trailing whitespace from lines in files. Almost all files are affected, as the BSD license copyright header had trailing whitespace on 4 lines in it [hence the number of files reporting 8 lines changed in the diffstat]. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> [Thomas: remove spaces before tabs in libs] [Thomas: remove more trailing spaces in non-C files] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-03 23:42:50 +00:00
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
diag = hw->mac.ops.reset_hw(hw);
/* Allocate memory for storing MAC addresses */
eth_dev->data->mac_addrs = rte_zmalloc("igbvf", ETHER_ADDR_LEN *
hw->mac.rar_entry_count, 0);
if (eth_dev->data->mac_addrs == NULL) {
PMD_INIT_LOG(ERR,
"Failed to allocate %d bytes needed to store MAC "
"addresses",
ETHER_ADDR_LEN * hw->mac.rar_entry_count);
return -ENOMEM;
}
remove trailing whitespaces This commit removes trailing whitespace from lines in files. Almost all files are affected, as the BSD license copyright header had trailing whitespace on 4 lines in it [hence the number of files reporting 8 lines changed in the diffstat]. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> [Thomas: remove spaces before tabs in libs] [Thomas: remove more trailing spaces in non-C files] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-03 23:42:50 +00:00
igbvf: fix MAC address if none assigned by PF If use DPDK PF + DPDK VF on igb NICs, we find the MAC address of VF port is always 0. Because we forget to give it a value if this MAC address is not assigned by PF. This patch'll assign a random MAC address to igb VF port as ixgbe does. Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2015-11-27 06:07:35 +00:00
/* Generate a random MAC address, if none was assigned by PF. */
if (is_zero_ether_addr(perm_addr)) {
eth_random_addr(perm_addr->addr_bytes);
diag = e1000_rar_set(hw, perm_addr->addr_bytes, 0);
if (diag) {
rte_free(eth_dev->data->mac_addrs);
eth_dev->data->mac_addrs = NULL;
return diag;
}
PMD_INIT_LOG(INFO, "\tVF MAC address not assigned by Host PF");
PMD_INIT_LOG(INFO, "\tAssign randomly generated MAC address "
"%02x:%02x:%02x:%02x:%02x:%02x",
perm_addr->addr_bytes[0],
perm_addr->addr_bytes[1],
perm_addr->addr_bytes[2],
perm_addr->addr_bytes[3],
perm_addr->addr_bytes[4],
perm_addr->addr_bytes[5]);
}
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
/* Copy the permanent MAC address */
ether_addr_copy((struct ether_addr *) hw->mac.perm_addr,
&eth_dev->data->mac_addrs[0]);
e1000: clean log messages - remove leading \n in some messages, - remove trailing \n in some messages, - split multi lines messages, - introduce PMD_INIT_FUNC_TRACE macro and use it instead of PMD_INIT_LOG(DEBUG, "some_func") Signed-off-by: David Marchand <david.marchand@6wind.com> Reviewed-by: Jay Rolette <rolette@infiniteio.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2014-09-17 13:46:49 +00:00
PMD_INIT_LOG(DEBUG, "port %d vendorID=0x%x deviceID=0x%x "
"mac.type=%s",
e1000: indent logs sections Prepare for next commit, indent sections where log messages will be modified so that next patch is only about \n. Signed-off-by: David Marchand <david.marchand@6wind.com>
2014-09-17 13:46:48 +00:00
eth_dev->data->port_id, pci_dev->id.vendor_id,
pci_dev->id.device_id, "igb_mac_82576_vf");
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
net/e1000: localize mapping of ethdev to PCI device Create one macro for where PCI device information is extracted from ethernet device. Makes later changes easier to review, and test. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jan Blunck <jblunck@infradead.org>
2016-12-23 15:57:56 +00:00
intr_handle = &pci_dev->intr_handle;
rte_intr_callback_register(intr_handle,
eth_igbvf_interrupt_handler, eth_dev);
net/igb: support VF mailbox interrupt for link up/down When using kernel PF and DPDK VF, when the PF driver finds the link state changes, up -> down or down -> up, the driver will send a message to VF by mailbox. This link state change may be triggered by PHY disconnection/reconnection, user config change like *ifconfig down/up* or interface parameter, like MTU change. This patch enables the support of the mailbox interrupt, so VF driver can receive the message for link up/down. After VF receives this message, VF port need to be reset to recover. This needs to be handled by the application so this patch allows the app to register a reset callback so it can reset the VF port. Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Jingjing Wu <jingjing.wu@intel.com>
2016-06-01 01:53:09 +00:00
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
return 0;
}
e1000: support port hotplug This patch depends on the Port Hotplug Framework. It implements the eth_dev_uninit functions for rte_em_pmd, rte_igb_pmd and rte_igbvf_pmd. Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-07-03 14:38:26 +00:00
static int
eth_igbvf_dev_uninit(struct rte_eth_dev *eth_dev)
{
struct e1000_adapter *adapter =
E1000_DEV_PRIVATE(eth_dev->data->dev_private);
net/e1000: localize mapping of ethdev to PCI device Create one macro for where PCI device information is extracted from ethernet device. Makes later changes easier to review, and test. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jan Blunck <jblunck@infradead.org>
2016-12-23 15:57:56 +00:00
struct rte_pci_device *pci_dev = E1000_DEV_TO_PCI(eth_dev);
e1000: support port hotplug This patch depends on the Port Hotplug Framework. It implements the eth_dev_uninit functions for rte_em_pmd, rte_igb_pmd and rte_igbvf_pmd. Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-07-03 14:38:26 +00:00
PMD_INIT_FUNC_TRACE();
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
return -EPERM;
if (adapter->stopped == 0)
igbvf_dev_close(eth_dev);
eth_dev->dev_ops = NULL;
eth_dev->rx_pkt_burst = NULL;
eth_dev->tx_pkt_burst = NULL;
rte_free(eth_dev->data->mac_addrs);
eth_dev->data->mac_addrs = NULL;
net/igb: support VF mailbox interrupt for link up/down When using kernel PF and DPDK VF, when the PF driver finds the link state changes, up -> down or down -> up, the driver will send a message to VF by mailbox. This link state change may be triggered by PHY disconnection/reconnection, user config change like *ifconfig down/up* or interface parameter, like MTU change. This patch enables the support of the mailbox interrupt, so VF driver can receive the message for link up/down. After VF receives this message, VF port need to be reset to recover. This needs to be handled by the application so this patch allows the app to register a reset callback so it can reset the VF port. Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Jingjing Wu <jingjing.wu@intel.com>
2016-06-01 01:53:09 +00:00
/* disable uio intr before callback unregister */
rte_intr_disable(&pci_dev->intr_handle);
rte_intr_callback_unregister(&pci_dev->intr_handle,
eth_igbvf_interrupt_handler,
(void *)eth_dev);
e1000: support port hotplug This patch depends on the Port Hotplug Framework. It implements the eth_dev_uninit functions for rte_em_pmd, rte_igb_pmd and rte_igbvf_pmd. Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-07-03 14:38:26 +00:00
return 0;
}
drivers/net: do not use ethdev driver Signed-off-by: Jan Blunck <jblunck@infradead.org> Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org>
2017-04-11 15:44:24 +00:00
static int eth_igb_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
struct rte_pci_device *pci_dev)
{
return rte_eth_dev_pci_generic_probe(pci_dev,
sizeof(struct e1000_adapter), eth_igb_dev_init);
}
static int eth_igb_pci_remove(struct rte_pci_device *pci_dev)
{
return rte_eth_dev_pci_generic_remove(pci_dev, eth_igb_dev_uninit);
}
static struct rte_pci_driver rte_igb_pmd = {
.id_table = pci_id_igb_map,
.drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_INTR_LSC,
.probe = eth_igb_pci_probe,
.remove = eth_igb_pci_remove,
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
};
drivers/net: do not use ethdev driver Signed-off-by: Jan Blunck <jblunck@infradead.org> Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org>
2017-04-11 15:44:24 +00:00
static int eth_igbvf_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
struct rte_pci_device *pci_dev)
{
return rte_eth_dev_pci_generic_probe(pci_dev,
sizeof(struct e1000_adapter), eth_igbvf_dev_init);
}
static int eth_igbvf_pci_remove(struct rte_pci_device *pci_dev)
{
return rte_eth_dev_pci_generic_remove(pci_dev, eth_igbvf_dev_uninit);
}
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
/*
* virtual function driver struct
*/
drivers/net: do not use ethdev driver Signed-off-by: Jan Blunck <jblunck@infradead.org> Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org>
2017-04-11 15:44:24 +00:00
static struct rte_pci_driver rte_igbvf_pmd = {
.id_table = pci_id_igbvf_map,
.drv_flags = RTE_PCI_DRV_NEED_MAPPING,
.probe = eth_igbvf_pci_probe,
.remove = eth_igbvf_pci_remove,
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
};
igb: add VMDq support Signed-off-by: Intel
2013-09-18 10:00:00 +00:00
static void
igb_vmdq_vlan_hw_filter_enable(struct rte_eth_dev *dev)
{
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
/* RCTL: enable VLAN filter since VMDq always use VLAN filter */
uint32_t rctl = E1000_READ_REG(hw, E1000_RCTL);
rctl |= E1000_RCTL_VFE;
E1000_WRITE_REG(hw, E1000_RCTL, rctl);
}
ethdev: move the multi-queue mode check to specific drivers Different NIC has its specific constraint on the multi-queue configuration, so move the checking from ethdev lib to drivers. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Jijiang Liu <jijiang.liu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-10-31 15:57:24 +00:00
static int
igb_check_mq_mode(struct rte_eth_dev *dev)
{
enum rte_eth_rx_mq_mode rx_mq_mode = dev->data->dev_conf.rxmode.mq_mode;
enum rte_eth_tx_mq_mode tx_mq_mode = dev->data->dev_conf.txmode.mq_mode;
uint16_t nb_rx_q = dev->data->nb_rx_queues;
uint16_t nb_tx_q = dev->data->nb_rx_queues;
if ((rx_mq_mode & ETH_MQ_RX_DCB_FLAG) ||
tx_mq_mode == ETH_MQ_TX_DCB ||
tx_mq_mode == ETH_MQ_TX_VMDQ_DCB) {
PMD_INIT_LOG(ERR, "DCB mode is not supported.");
return -EINVAL;
}
if (RTE_ETH_DEV_SRIOV(dev).active != 0) {
/* Check multi-queue mode.
* To no break software we accept ETH_MQ_RX_NONE as this might
* be used to turn off VLAN filter.
*/
if (rx_mq_mode == ETH_MQ_RX_NONE ||
rx_mq_mode == ETH_MQ_RX_VMDQ_ONLY) {
dev->data->dev_conf.rxmode.mq_mode = ETH_MQ_RX_VMDQ_ONLY;
RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool = 1;
} else {
/* Only support one queue on VFs.
* RSS together with SRIOV is not supported.
*/
PMD_INIT_LOG(ERR, "SRIOV is active,"
" wrong mq_mode rx %d.",
rx_mq_mode);
return -EINVAL;
}
/* TX mode is not used here, so mode might be ignored.*/
if (tx_mq_mode != ETH_MQ_TX_VMDQ_ONLY) {
/* SRIOV only works in VMDq enable mode */
PMD_INIT_LOG(WARNING, "SRIOV is active,"
" TX mode %d is not supported. "
" Driver will behave as %d mode.",
tx_mq_mode, ETH_MQ_TX_VMDQ_ONLY);
}
/* check valid queue number */
if ((nb_rx_q > 1) || (nb_tx_q > 1)) {
PMD_INIT_LOG(ERR, "SRIOV is active,"
" only support one queue on VFs.");
return -EINVAL;
}
} else {
/* To no break software that set invalid mode, only display
* warning if invalid mode is used.
*/
if (rx_mq_mode != ETH_MQ_RX_NONE &&
rx_mq_mode != ETH_MQ_RX_VMDQ_ONLY &&
rx_mq_mode != ETH_MQ_RX_RSS) {
/* RSS together with VMDq not supported*/
PMD_INIT_LOG(ERR, "RX mode %d is not supported.",
rx_mq_mode);
return -EINVAL;
}
if (tx_mq_mode != ETH_MQ_TX_NONE &&
tx_mq_mode != ETH_MQ_TX_VMDQ_ONLY) {
PMD_INIT_LOG(WARNING, "TX mode %d is not supported."
" Due to txmode is meaningless in this"
" driver, just ignore.",
tx_mq_mode);
}
}
return 0;
}
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
static int
e1000: update RX/TX queue configuration Queues are allocated by rte_ether. Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
eth_igb_configure(struct rte_eth_dev *dev)
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
{
struct e1000_interrupt *intr =
E1000_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
ethdev: move the multi-queue mode check to specific drivers Different NIC has its specific constraint on the multi-queue configuration, so move the checking from ethdev lib to drivers. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Jijiang Liu <jijiang.liu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-10-31 15:57:24 +00:00
int ret;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
e1000: clean log messages - remove leading \n in some messages, - remove trailing \n in some messages, - split multi lines messages, - introduce PMD_INIT_FUNC_TRACE macro and use it instead of PMD_INIT_LOG(DEBUG, "some_func") Signed-off-by: David Marchand <david.marchand@6wind.com> Reviewed-by: Jay Rolette <rolette@infiniteio.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2014-09-17 13:46:49 +00:00
PMD_INIT_FUNC_TRACE();
ethdev: move the multi-queue mode check to specific drivers Different NIC has its specific constraint on the multi-queue configuration, so move the checking from ethdev lib to drivers. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Jijiang Liu <jijiang.liu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-10-31 15:57:24 +00:00
/* multipe queue mode checking */
ret = igb_check_mq_mode(dev);
if (ret != 0) {
PMD_DRV_LOG(ERR, "igb_check_mq_mode fails with %d.",
ret);
return ret;
}
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
intr->flags |= E1000_FLAG_NEED_LINK_UPDATE;
e1000: clean log messages - remove leading \n in some messages, - remove trailing \n in some messages, - split multi lines messages, - introduce PMD_INIT_FUNC_TRACE macro and use it instead of PMD_INIT_LOG(DEBUG, "some_func") Signed-off-by: David Marchand <david.marchand@6wind.com> Reviewed-by: Jay Rolette <rolette@infiniteio.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2014-09-17 13:46:49 +00:00
PMD_INIT_FUNC_TRACE();
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
ethdev: move the multi-queue mode check to specific drivers Different NIC has its specific constraint on the multi-queue configuration, so move the checking from ethdev lib to drivers. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Jijiang Liu <jijiang.liu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-10-31 15:57:24 +00:00
return 0;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
}
static int
eth_igb_start(struct rte_eth_dev *dev)
{
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
e1000: support port hotplug This patch depends on the Port Hotplug Framework. It implements the eth_dev_uninit functions for rte_em_pmd, rte_igb_pmd and rte_igbvf_pmd. Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-07-03 14:38:26 +00:00
struct e1000_adapter *adapter =
E1000_DEV_PRIVATE(dev->data->dev_private);
net/e1000: localize mapping of ethdev to PCI device Create one macro for where PCI device information is extracted from ethernet device. Makes later changes easier to review, and test. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jan Blunck <jblunck@infradead.org>
2016-12-23 15:57:56 +00:00
struct rte_pci_device *pci_dev = E1000_DEV_TO_PCI(dev);
struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
igb: enable Rx queue interrupts for PF The patch does below for igb PF: - Setup NIC to generate MSI-X interrupts - Set the IVAR register to map interrupt causes to vectors - Implement interrupt enable/disable functions Signed-off-by: Danny Zhou <danny.zhou@intel.com> Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-07-20 03:02:28 +00:00
int ret, mask;
uint32_t intr_vector = 0;
igb: add PF support Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
uint32_t ctrl_ext;
ethdev: redesign link speed config This patch redesigns the API to set the link speed/s configuration of an ethernet port. Specifically: - it allows to define a set of advertised speeds for auto-negociation. - it allows to disable link auto-negociation (single fixed speed). - default: auto-negociate all supported speeds. A flag autoneg in struct rte_eth_link indicates if link speed was a result of auto-negociation or was fixed by configuration. Signed-off-by: Marc Sune <marcdevel@gmail.com> Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com> Tested-by: Beilei Xing <beilei.xing@intel.com> Tested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
2016-03-31 22:12:29 +00:00
uint32_t *speeds;
int num_speeds;
bool autoneg;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
e1000: clean log messages - remove leading \n in some messages, - remove trailing \n in some messages, - split multi lines messages, - introduce PMD_INIT_FUNC_TRACE macro and use it instead of PMD_INIT_LOG(DEBUG, "some_func") Signed-off-by: David Marchand <david.marchand@6wind.com> Reviewed-by: Jay Rolette <rolette@infiniteio.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2014-09-17 13:46:49 +00:00
PMD_INIT_FUNC_TRACE();
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
igb: fix VFIO interrupt vector The vector number may change during 'dev_start'. Before enabling a new vector mapping, it's necessary to disable/unmap the previous setting. Fixes: fe685de2b1b6 ("igb: fix VF start with PF stopped") Reported-by: Yong Liu <yong.liu@intel.com> Signed-off-by: Cunming Liang <cunming.liang@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2015-11-13 02:50:27 +00:00
/* disable uio/vfio intr/eventfd mapping */
rte_intr_disable(intr_handle);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
/* Power up the phy. Needed to make the link go Up */
net/igb: support setting link up or down Add driver functions to set link state up or down. Signed-off-by: Aaron Campbell <aaron@arbor.net> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2016-06-27 15:46:25 +00:00
eth_igb_dev_set_link_up(dev);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
/*
* Packet Buffer Allocation (PBA)
* Writing PBA sets the receive portion of the buffer
* the remainder is used for the transmit buffer.
*/
if (hw->mac.type == e1000_82575) {
uint32_t pba;
pba = E1000_PBA_32K; /* 32K for Rx, 16K for Tx */
E1000_WRITE_REG(hw, E1000_PBA, pba);
}
/* Put the address into the Receive Address Array */
e1000_rar_set(hw, hw->mac.addr, 0);
/* Initialize the hardware */
if (igb_hardware_init(hw)) {
PMD_INIT_LOG(ERR, "Unable to initialize the hardware");
remove extra parentheses in return statement fix the error reported by checkpatch: "ERROR: return is not a function, parentheses are not required" remove parentheses in return like: "return (logical expressions)" remove parentheses in return a function like: "return (rte_mempool_lookup(...))" Fixes: 6307b909b8e0 ("lib: remove extra parenthesis after return") Signed-off-by: Huawei Xie <huawei.xie@intel.com>
2016-01-27 13:58:30 +00:00
return -EIO;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
}
e1000: support port hotplug This patch depends on the Port Hotplug Framework. It implements the eth_dev_uninit functions for rte_em_pmd, rte_igb_pmd and rte_igbvf_pmd. Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-07-03 14:38:26 +00:00
adapter->stopped = 0;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
igb: fix dual vlan ethertype Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Signed-off-by: David Marchand <david.marchand@6wind.com>
2014-02-17 20:21:03 +00:00
E1000_WRITE_REG(hw, E1000_VET, ETHER_TYPE_VLAN << 16 | ETHER_TYPE_VLAN);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
igb: add PF support Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
/* Set PF Reset Done bit so PF/VF Mail Ops can work */
ctrl_ext |= E1000_CTRL_EXT_PFRSTD;
E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
E1000_WRITE_FLUSH(hw);
/* configure PF module if SRIOV enabled */
igb_pf_host_configure(dev);
igb: enable Rx queue interrupts for PF The patch does below for igb PF: - Setup NIC to generate MSI-X interrupts - Set the IVAR register to map interrupt causes to vectors - Implement interrupt enable/disable functions Signed-off-by: Danny Zhou <danny.zhou@intel.com> Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-07-20 03:02:28 +00:00
/* check and configure queue intr-vector mapping */
igb: fix VF start with PF stopped When igb runs as a PF, mbox interrupt is prerequisite to make VF start normally. And PF sometimes won't 'dev_start', so the mbox interrupt register during 'dev_init' is required. The patch rolls back the interrupt register for mbox,lsc to the 'dev_init'. As UIO doesn't support multiple vector, mbox has to occupy the only one. It adds condition check on 'dev_start', rxq interrupt is not allowed when PF running in IOV mode via UIO. Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-11-04 08:45:38 +00:00
if ((rte_intr_cap_multiple(intr_handle) ||
!RTE_ETH_DEV_SRIOV(dev).active) &&
dev->data->dev_conf.intr_conf.rxq != 0) {
igb: enable Rx queue interrupts for PF The patch does below for igb PF: - Setup NIC to generate MSI-X interrupts - Set the IVAR register to map interrupt causes to vectors - Implement interrupt enable/disable functions Signed-off-by: Danny Zhou <danny.zhou@intel.com> Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-07-20 03:02:28 +00:00
intr_vector = dev->data->nb_rx_queues;
igb: avoid enabling interrupt with zero vector Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-11-04 08:45:33 +00:00
if (rte_intr_efd_enable(intr_handle, intr_vector))
return -1;
}
igb: enable Rx queue interrupts for PF The patch does below for igb PF: - Setup NIC to generate MSI-X interrupts - Set the IVAR register to map interrupt causes to vectors - Implement interrupt enable/disable functions Signed-off-by: Danny Zhou <danny.zhou@intel.com> Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-07-20 03:02:28 +00:00
igb: fix VF start with PF stopped When igb runs as a PF, mbox interrupt is prerequisite to make VF start normally. And PF sometimes won't 'dev_start', so the mbox interrupt register during 'dev_init' is required. The patch rolls back the interrupt register for mbox,lsc to the 'dev_init'. As UIO doesn't support multiple vector, mbox has to occupy the only one. It adds condition check on 'dev_start', rxq interrupt is not allowed when PF running in IOV mode via UIO. Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-11-04 08:45:38 +00:00
if (rte_intr_dp_is_en(intr_handle) && !intr_handle->intr_vec) {
igb: enable Rx queue interrupts for PF The patch does below for igb PF: - Setup NIC to generate MSI-X interrupts - Set the IVAR register to map interrupt causes to vectors - Implement interrupt enable/disable functions Signed-off-by: Danny Zhou <danny.zhou@intel.com> Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-07-20 03:02:28 +00:00
intr_handle->intr_vec =
rte_zmalloc("intr_vec",
dev->data->nb_rx_queues * sizeof(int), 0);
if (intr_handle->intr_vec == NULL) {
PMD_INIT_LOG(ERR, "Failed to allocate %d rx_queues"
drivers/net: remove redundant new line from logs Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org>
2017-01-27 15:16:32 +00:00
" intr_vec", dev->data->nb_rx_queues);
igb: enable Rx queue interrupts for PF The patch does below for igb PF: - Setup NIC to generate MSI-X interrupts - Set the IVAR register to map interrupt causes to vectors - Implement interrupt enable/disable functions Signed-off-by: Danny Zhou <danny.zhou@intel.com> Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-07-20 03:02:28 +00:00
return -ENOMEM;
}
}
/* confiugre msix for rx interrupt */
eth_igb_configure_msix_intr(dev);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
/* Configure for OS presence */
igb_init_manageability(hw);
eth_igb_tx_init(dev);
/* This can fail when allocating mbufs for descriptor rings */
ret = eth_igb_rx_init(dev);
if (ret) {
PMD_INIT_LOG(ERR, "Unable to initialize RX hardware");
e1000: update RX/TX queue configuration Queues are allocated by rte_ether. Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
igb_dev_clear_queues(dev);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
return ret;
}
e1000_clear_hw_cntrs_base_generic(hw);
/*
e1000: add vlan offload support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
* VLAN Offload Settings
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
*/
e1000: add vlan offload support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
mask = ETH_VLAN_STRIP_MASK | ETH_VLAN_FILTER_MASK | \
ETH_VLAN_EXTEND_MASK;
eth_igb_vlan_offload_set(dev, mask);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
igb: add VMDq support Signed-off-by: Intel
2013-09-18 10:00:00 +00:00
if (dev->data->dev_conf.rxmode.mq_mode == ETH_MQ_RX_VMDQ_ONLY) {
/* Enable VLAN filter since VMDq always use VLAN filter */
igb_vmdq_vlan_hw_filter_enable(dev);
}
remove trailing whitespaces This commit removes trailing whitespace from lines in files. Almost all files are affected, as the BSD license copyright header had trailing whitespace on 4 lines in it [hence the number of files reporting 8 lines changed in the diffstat]. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> [Thomas: remove spaces before tabs in libs] [Thomas: remove more trailing spaces in non-C files] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-03 23:42:50 +00:00
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
if ((hw->mac.type == e1000_82576) || (hw->mac.type == e1000_82580) ||
igb: fix i211 support igb_ethdev.c contains function eth_igb_infos_get() which should set number of tx/rx queues supported by the hardware. It contains huge [switch] but there is no i211 case! Also, there are few other places which mention i210, but not mention i211. I didn't check it enough to say it is totally correct. For now I see that it just able to send and receive some packets. Signed-off-by: Sergey Mironov <grrwlf@gmail.com> Reviewed-by: Helin Zhang <helin.zhang@intel.com> [Thomas: fix indent] Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-09-04 08:35:11 +00:00
(hw->mac.type == e1000_i350) || (hw->mac.type == e1000_i210) ||
(hw->mac.type == e1000_i211)) {
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
/* Configure EITR with the maximum possible value (0xFFFF) */
E1000_WRITE_REG(hw, E1000_EITR(0), 0xFFFF);
}
/* Setup link speed and duplex */
ethdev: redesign link speed config This patch redesigns the API to set the link speed/s configuration of an ethernet port. Specifically: - it allows to define a set of advertised speeds for auto-negociation. - it allows to disable link auto-negociation (single fixed speed). - default: auto-negociate all supported speeds. A flag autoneg in struct rte_eth_link indicates if link speed was a result of auto-negociation or was fixed by configuration. Signed-off-by: Marc Sune <marcdevel@gmail.com> Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com> Tested-by: Beilei Xing <beilei.xing@intel.com> Tested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
2016-03-31 22:12:29 +00:00
speeds = &dev->data->dev_conf.link_speeds;
if (*speeds == ETH_LINK_SPEED_AUTONEG) {
hw->phy.autoneg_advertised = E1000_ALL_SPEED_DUPLEX;
net/e1000: fix forced configuration of speed and duplex From the code, it looks like, hw->mac.autoneg, variable is used to switch between calling either autoneg function or forcing speed/duplex function. But this variable is not modified in eth_em_start/eth_igb_start routines (it is always set to 1) even while forcing the link speed. Following discussion thread has some more information on this: http://dpdk.org/ml/archives/dev/2016-October/049272.html Signed-off-by: Ananda Sathyanarayana <ananda@versa-networks.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2016-11-02 23:36:55 +00:00
hw->mac.autoneg = 1;
ethdev: redesign link speed config This patch redesigns the API to set the link speed/s configuration of an ethernet port. Specifically: - it allows to define a set of advertised speeds for auto-negociation. - it allows to disable link auto-negociation (single fixed speed). - default: auto-negociate all supported speeds. A flag autoneg in struct rte_eth_link indicates if link speed was a result of auto-negociation or was fixed by configuration. Signed-off-by: Marc Sune <marcdevel@gmail.com> Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com> Tested-by: Beilei Xing <beilei.xing@intel.com> Tested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
2016-03-31 22:12:29 +00:00
} else {
num_speeds = 0;
autoneg = (*speeds & ETH_LINK_SPEED_FIXED) == 0;
/* Reset */
hw->phy.autoneg_advertised = 0;
if (*speeds & ~(ETH_LINK_SPEED_10M_HD | ETH_LINK_SPEED_10M |
ETH_LINK_SPEED_100M_HD | ETH_LINK_SPEED_100M |
ETH_LINK_SPEED_1G | ETH_LINK_SPEED_FIXED)) {
num_speeds = -1;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
goto error_invalid_config;
ethdev: redesign link speed config This patch redesigns the API to set the link speed/s configuration of an ethernet port. Specifically: - it allows to define a set of advertised speeds for auto-negociation. - it allows to disable link auto-negociation (single fixed speed). - default: auto-negociate all supported speeds. A flag autoneg in struct rte_eth_link indicates if link speed was a result of auto-negociation or was fixed by configuration. Signed-off-by: Marc Sune <marcdevel@gmail.com> Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com> Tested-by: Beilei Xing <beilei.xing@intel.com> Tested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
2016-03-31 22:12:29 +00:00
}
if (*speeds & ETH_LINK_SPEED_10M_HD) {
hw->phy.autoneg_advertised |= ADVERTISE_10_HALF;
num_speeds++;
}
if (*speeds & ETH_LINK_SPEED_10M) {
hw->phy.autoneg_advertised |= ADVERTISE_10_FULL;
num_speeds++;
}
if (*speeds & ETH_LINK_SPEED_100M_HD) {
hw->phy.autoneg_advertised |= ADVERTISE_100_HALF;
num_speeds++;
}
if (*speeds & ETH_LINK_SPEED_100M) {
hw->phy.autoneg_advertised |= ADVERTISE_100_FULL;
num_speeds++;
}
if (*speeds & ETH_LINK_SPEED_1G) {
hw->phy.autoneg_advertised |= ADVERTISE_1000_FULL;
num_speeds++;
}
if (num_speeds == 0 || (!autoneg && (num_speeds > 1)))
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
goto error_invalid_config;
net/e1000: fix forced configuration of speed and duplex From the code, it looks like, hw->mac.autoneg, variable is used to switch between calling either autoneg function or forcing speed/duplex function. But this variable is not modified in eth_em_start/eth_igb_start routines (it is always set to 1) even while forcing the link speed. Following discussion thread has some more information on this: http://dpdk.org/ml/archives/dev/2016-October/049272.html Signed-off-by: Ananda Sathyanarayana <ananda@versa-networks.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2016-11-02 23:36:55 +00:00
/* Set/reset the mac.autoneg based on the link speed,
* fixed or not
*/
if (!autoneg) {
hw->mac.autoneg = 0;
hw->mac.forced_speed_duplex =
hw->phy.autoneg_advertised;
} else {
hw->mac.autoneg = 1;
}
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
}
ethdev: redesign link speed config This patch redesigns the API to set the link speed/s configuration of an ethernet port. Specifically: - it allows to define a set of advertised speeds for auto-negociation. - it allows to disable link auto-negociation (single fixed speed). - default: auto-negociate all supported speeds. A flag autoneg in struct rte_eth_link indicates if link speed was a result of auto-negociation or was fixed by configuration. Signed-off-by: Marc Sune <marcdevel@gmail.com> Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com> Tested-by: Beilei Xing <beilei.xing@intel.com> Tested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
2016-03-31 22:12:29 +00:00
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
e1000_setup_link(hw);
igb: fix VF start with PF stopped When igb runs as a PF, mbox interrupt is prerequisite to make VF start normally. And PF sometimes won't 'dev_start', so the mbox interrupt register during 'dev_init' is required. The patch rolls back the interrupt register for mbox,lsc to the 'dev_init'. As UIO doesn't support multiple vector, mbox has to occupy the only one. It adds condition check on 'dev_start', rxq interrupt is not allowed when PF running in IOV mode via UIO. Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-11-04 08:45:38 +00:00
if (rte_intr_allow_others(intr_handle)) {
/* check if lsc interrupt is enabled */
if (dev->data->dev_conf.intr_conf.lsc != 0)
igb: enable Rx queue interrupts for PF The patch does below for igb PF: - Setup NIC to generate MSI-X interrupts - Set the IVAR register to map interrupt causes to vectors - Implement interrupt enable/disable functions Signed-off-by: Danny Zhou <danny.zhou@intel.com> Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-07-20 03:02:28 +00:00
eth_igb_lsc_interrupt_setup(dev);
igb: fix VF start with PF stopped When igb runs as a PF, mbox interrupt is prerequisite to make VF start normally. And PF sometimes won't 'dev_start', so the mbox interrupt register during 'dev_init' is required. The patch rolls back the interrupt register for mbox,lsc to the 'dev_init'. As UIO doesn't support multiple vector, mbox has to occupy the only one. It adds condition check on 'dev_start', rxq interrupt is not allowed when PF running in IOV mode via UIO. Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-11-04 08:45:38 +00:00
} else {
rte_intr_callback_unregister(intr_handle,
eth_igb_interrupt_handler,
(void *)dev);
if (dev->data->dev_conf.intr_conf.lsc != 0)
igb: enable Rx queue interrupts for PF The patch does below for igb PF: - Setup NIC to generate MSI-X interrupts - Set the IVAR register to map interrupt causes to vectors - Implement interrupt enable/disable functions Signed-off-by: Danny Zhou <danny.zhou@intel.com> Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-07-20 03:02:28 +00:00
PMD_INIT_LOG(INFO, "lsc won't enable because of"
drivers/net: remove redundant new line from logs Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org>
2017-01-27 15:16:32 +00:00
" no intr multiplex");
igb: enable Rx queue interrupts for PF The patch does below for igb PF: - Setup NIC to generate MSI-X interrupts - Set the IVAR register to map interrupt causes to vectors - Implement interrupt enable/disable functions Signed-off-by: Danny Zhou <danny.zhou@intel.com> Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-07-20 03:02:28 +00:00
}
/* check if rxq interrupt is enabled */
igb: fix VF start with PF stopped When igb runs as a PF, mbox interrupt is prerequisite to make VF start normally. And PF sometimes won't 'dev_start', so the mbox interrupt register during 'dev_init' is required. The patch rolls back the interrupt register for mbox,lsc to the 'dev_init'. As UIO doesn't support multiple vector, mbox has to occupy the only one. It adds condition check on 'dev_start', rxq interrupt is not allowed when PF running in IOV mode via UIO. Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-11-04 08:45:38 +00:00
if (dev->data->dev_conf.intr_conf.rxq != 0 &&
rte_intr_dp_is_en(intr_handle))
igb: enable Rx queue interrupts for PF The patch does below for igb PF: - Setup NIC to generate MSI-X interrupts - Set the IVAR register to map interrupt causes to vectors - Implement interrupt enable/disable functions Signed-off-by: Danny Zhou <danny.zhou@intel.com> Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-07-20 03:02:28 +00:00
eth_igb_rxq_interrupt_setup(dev);
/* enable uio/vfio intr/eventfd mapping */
rte_intr_enable(intr_handle);
pci: rework interrupt handling Signed-off-by: Intel <intel.com>
2013-06-03 00:00:00 +00:00
e1000: minor changes Signed-off-by: Intel
2013-09-18 10:00:00 +00:00
/* resume enabled intr since hw reset */
igb_intr_enable(dev);
igb: various updates Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
PMD_INIT_LOG(DEBUG, "<<");
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
remove extra parentheses in return statement fix the error reported by checkpatch: "ERROR: return is not a function, parentheses are not required" remove parentheses in return like: "return (logical expressions)" remove parentheses in return a function like: "return (rte_mempool_lookup(...))" Fixes: 6307b909b8e0 ("lib: remove extra parenthesis after return") Signed-off-by: Huawei Xie <huawei.xie@intel.com>
2016-01-27 13:58:30 +00:00
return 0;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
error_invalid_config:
ethdev: redesign link speed config This patch redesigns the API to set the link speed/s configuration of an ethernet port. Specifically: - it allows to define a set of advertised speeds for auto-negociation. - it allows to disable link auto-negociation (single fixed speed). - default: auto-negociate all supported speeds. A flag autoneg in struct rte_eth_link indicates if link speed was a result of auto-negociation or was fixed by configuration. Signed-off-by: Marc Sune <marcdevel@gmail.com> Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com> Tested-by: Beilei Xing <beilei.xing@intel.com> Tested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
2016-03-31 22:12:29 +00:00
PMD_INIT_LOG(ERR, "Invalid advertised speeds (%u) for port %u",
dev->data->dev_conf.link_speeds, dev->data->port_id);
e1000: update RX/TX queue configuration Queues are allocated by rte_ether. Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
igb_dev_clear_queues(dev);
remove extra parentheses in return statement fix the error reported by checkpatch: "ERROR: return is not a function, parentheses are not required" remove parentheses in return like: "return (logical expressions)" remove parentheses in return a function like: "return (rte_mempool_lookup(...))" Fixes: 6307b909b8e0 ("lib: remove extra parenthesis after return") Signed-off-by: Huawei Xie <huawei.xie@intel.com>
2016-01-27 13:58:30 +00:00
return -EINVAL;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
}
/*********************************************************************
*
* This routine disables all traffic on the adapter by issuing a
* global reset on the MAC.
*
**********************************************************************/
static void
eth_igb_stop(struct rte_eth_dev *dev)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
igb: migrate flex filter to new API This patch defines new functions dealing with flex filter. It removes old functions of flex filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-21 01:53:08 +00:00
struct e1000_filter_info *filter_info =
E1000_DEV_PRIVATE_TO_FILTER_INFO(dev->data->dev_private);
net/e1000: localize mapping of ethdev to PCI device Create one macro for where PCI device information is extracted from ethernet device. Makes later changes easier to review, and test. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jan Blunck <jblunck@infradead.org>
2016-12-23 15:57:56 +00:00
struct rte_pci_device *pci_dev = E1000_DEV_TO_PCI(dev);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
struct rte_eth_link link;
igb: migrate flex filter to new API This patch defines new functions dealing with flex filter. It removes old functions of flex filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-21 01:53:08 +00:00
struct e1000_flex_filter *p_flex;
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
struct e1000_5tuple_filter *p_5tuple, *p_5tuple_next;
struct e1000_2tuple_filter *p_2tuple, *p_2tuple_next;
net/e1000: localize mapping of ethdev to PCI device Create one macro for where PCI device information is extracted from ethernet device. Makes later changes easier to review, and test. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jan Blunck <jblunck@infradead.org>
2016-12-23 15:57:56 +00:00
struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
igb_intr_disable(hw);
igb: enable Rx queue interrupts for PF The patch does below for igb PF: - Setup NIC to generate MSI-X interrupts - Set the IVAR register to map interrupt causes to vectors - Implement interrupt enable/disable functions Signed-off-by: Danny Zhou <danny.zhou@intel.com> Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-07-20 03:02:28 +00:00
/* disable intr eventfd mapping */
rte_intr_disable(intr_handle);
igb: add PF support Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
igb_pf_reset_hw(hw);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
E1000_WRITE_REG(hw, E1000_WUC, 0);
igb: force phy power up/down Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
/* Set bit for Go Link disconnect */
if (hw->mac.type >= e1000_82580) {
uint32_t phpm_reg;
phpm_reg = E1000_READ_REG(hw, E1000_82580_PHY_POWER_MGMT);
phpm_reg |= E1000_82580_PM_GO_LINKD;
E1000_WRITE_REG(hw, E1000_82580_PHY_POWER_MGMT, phpm_reg);
}
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
/* Power down the phy. Needed to make the link go Down */
net/igb: support setting link up or down Add driver functions to set link state up or down. Signed-off-by: Aaron Campbell <aaron@arbor.net> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2016-06-27 15:46:25 +00:00
eth_igb_dev_set_link_down(dev);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
igb_dev_clear_queues(dev);
/* clear the recorded link status */
memset(&link, 0, sizeof(link));
rte_igb_dev_atomic_write_link_status(dev, &link);
igb: migrate flex filter to new API This patch defines new functions dealing with flex filter. It removes old functions of flex filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-21 01:53:08 +00:00
/* Remove all flex filters of the device */
while ((p_flex = TAILQ_FIRST(&filter_info->flex_list))) {
TAILQ_REMOVE(&filter_info->flex_list, p_flex, entries);
rte_free(p_flex);
}
filter_info->flex_mask = 0;
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
/* Remove all ntuple filters of the device */
for (p_5tuple = TAILQ_FIRST(&filter_info->fivetuple_list);
p_5tuple != NULL; p_5tuple = p_5tuple_next) {
p_5tuple_next = TAILQ_NEXT(p_5tuple, entries);
TAILQ_REMOVE(&filter_info->fivetuple_list,
p_5tuple, entries);
rte_free(p_5tuple);
}
filter_info->fivetuple_mask = 0;
for (p_2tuple = TAILQ_FIRST(&filter_info->twotuple_list);
p_2tuple != NULL; p_2tuple = p_2tuple_next) {
p_2tuple_next = TAILQ_NEXT(p_2tuple, entries);
TAILQ_REMOVE(&filter_info->twotuple_list,
p_2tuple, entries);
rte_free(p_2tuple);
}
filter_info->twotuple_mask = 0;
igb: enable Rx queue interrupts for PF The patch does below for igb PF: - Setup NIC to generate MSI-X interrupts - Set the IVAR register to map interrupt causes to vectors - Implement interrupt enable/disable functions Signed-off-by: Danny Zhou <danny.zhou@intel.com> Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-07-20 03:02:28 +00:00
igb: fix VF start with PF stopped When igb runs as a PF, mbox interrupt is prerequisite to make VF start normally. And PF sometimes won't 'dev_start', so the mbox interrupt register during 'dev_init' is required. The patch rolls back the interrupt register for mbox,lsc to the 'dev_init'. As UIO doesn't support multiple vector, mbox has to occupy the only one. It adds condition check on 'dev_start', rxq interrupt is not allowed when PF running in IOV mode via UIO. Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-11-04 08:45:38 +00:00
if (!rte_intr_allow_others(intr_handle))
/* resume to the default handler */
rte_intr_callback_register(intr_handle,
eth_igb_interrupt_handler,
(void *)dev);
igb: enable Rx queue interrupts for PF The patch does below for igb PF: - Setup NIC to generate MSI-X interrupts - Set the IVAR register to map interrupt causes to vectors - Implement interrupt enable/disable functions Signed-off-by: Danny Zhou <danny.zhou@intel.com> Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-07-20 03:02:28 +00:00
/* Clean datapath event and queue/vec mapping */
rte_intr_efd_disable(intr_handle);
if (intr_handle->intr_vec != NULL) {
rte_free(intr_handle->intr_vec);
intr_handle->intr_vec = NULL;
}
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
}
net/igb: support setting link up or down Add driver functions to set link state up or down. Signed-off-by: Aaron Campbell <aaron@arbor.net> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2016-06-27 15:46:25 +00:00
static int
eth_igb_dev_set_link_up(struct rte_eth_dev *dev)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
if (hw->phy.media_type == e1000_media_type_copper)
e1000_power_up_phy(hw);
else
e1000_power_up_fiber_serdes_link(hw);
return 0;
}
static int
eth_igb_dev_set_link_down(struct rte_eth_dev *dev)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
if (hw->phy.media_type == e1000_media_type_copper)
e1000_power_down_phy(hw);
else
e1000_shutdown_fiber_serdes_link(hw);
return 0;
}
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
static void
eth_igb_close(struct rte_eth_dev *dev)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
e1000: support port hotplug This patch depends on the Port Hotplug Framework. It implements the eth_dev_uninit functions for rte_em_pmd, rte_igb_pmd and rte_igbvf_pmd. Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-07-03 14:38:26 +00:00
struct e1000_adapter *adapter =
E1000_DEV_PRIVATE(dev->data->dev_private);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
struct rte_eth_link link;
net/e1000: localize mapping of ethdev to PCI device Create one macro for where PCI device information is extracted from ethernet device. Makes later changes easier to review, and test. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jan Blunck <jblunck@infradead.org>
2016-12-23 15:57:56 +00:00
struct rte_pci_device *pci_dev = E1000_DEV_TO_PCI(dev);
struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
eth_igb_stop(dev);
e1000: support port hotplug This patch depends on the Port Hotplug Framework. It implements the eth_dev_uninit functions for rte_em_pmd, rte_igb_pmd and rte_igbvf_pmd. Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-07-03 14:38:26 +00:00
adapter->stopped = 1;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
e1000_phy_hw_reset(hw);
igb_release_manageability(hw);
igb_hw_control_release(hw);
igb: force phy power up/down Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
/* Clear bit for Go Link disconnect */
if (hw->mac.type >= e1000_82580) {
uint32_t phpm_reg;
phpm_reg = E1000_READ_REG(hw, E1000_82580_PHY_POWER_MGMT);
phpm_reg &= ~E1000_82580_PM_GO_LINKD;
E1000_WRITE_REG(hw, E1000_82580_PHY_POWER_MGMT, phpm_reg);
}
e1000: free queue memory when closing Queues were freed in clear function called in stop function. Split clearing and freeing in separate functions to move queue freeing from stop to close function. Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-07-03 14:38:27 +00:00
igb_dev_free_queues(dev);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
net/e1000: localize mapping of ethdev to PCI device Create one macro for where PCI device information is extracted from ethernet device. Makes later changes easier to review, and test. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jan Blunck <jblunck@infradead.org>
2016-12-23 15:57:56 +00:00
if (intr_handle->intr_vec) {
rte_free(intr_handle->intr_vec);
intr_handle->intr_vec = NULL;
igb: enable Rx queue interrupts for PF The patch does below for igb PF: - Setup NIC to generate MSI-X interrupts - Set the IVAR register to map interrupt causes to vectors - Implement interrupt enable/disable functions Signed-off-by: Danny Zhou <danny.zhou@intel.com> Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-07-20 03:02:28 +00:00
}
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
memset(&link, 0, sizeof(link));
rte_igb_dev_atomic_write_link_status(dev, &link);
}
static int
igb_get_rx_buffer_size(struct e1000_hw *hw)
{
uint32_t rx_buf_size;
if (hw->mac.type == e1000_82576) {
rx_buf_size = (E1000_READ_REG(hw, E1000_RXPBS) & 0xffff) << 10;
igb: more supported devices Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
} else if (hw->mac.type == e1000_82580 || hw->mac.type == e1000_i350) {
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
/* PBS needs to be translated according to a lookup table */
rx_buf_size = (E1000_READ_REG(hw, E1000_RXPBS) & 0xf);
rx_buf_size = (uint32_t) e1000_rxpbs_adjust_82580(rx_buf_size);
rx_buf_size = (rx_buf_size << 10);
igb: fix i211 support igb_ethdev.c contains function eth_igb_infos_get() which should set number of tx/rx queues supported by the hardware. It contains huge [switch] but there is no i211 case! Also, there are few other places which mention i210, but not mention i211. I didn't check it enough to say it is totally correct. For now I see that it just able to send and receive some packets. Signed-off-by: Sergey Mironov <grrwlf@gmail.com> Reviewed-by: Helin Zhang <helin.zhang@intel.com> [Thomas: fix indent] Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-09-04 08:35:11 +00:00
} else if (hw->mac.type == e1000_i210 || hw->mac.type == e1000_i211) {
igb: more supported devices Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
rx_buf_size = (E1000_READ_REG(hw, E1000_RXPBS) & 0x3f) << 10;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
} else {
rx_buf_size = (E1000_READ_REG(hw, E1000_PBA) & 0xffff) << 10;
}
return rx_buf_size;
}
/*********************************************************************
*
* Initialize the hardware
*
**********************************************************************/
static int
igb_hardware_init(struct e1000_hw *hw)
{
uint32_t rx_buf_size;
int diag;
/* Let the firmware know the OS is in control */
igb_hw_control_acquire(hw);
/*
* These parameters control the automatic generation (Tx) and
* response (Rx) to Ethernet PAUSE frames.
* - High water mark should allow for at least two standard size (1518)
* frames to be received after sending an XOFF.
* - Low water mark works best when it is very near the high water mark.
* This allows the receiver to restart by sending XON when it has
spelling fixes Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2014-05-02 23:42:52 +00:00
* drained a bit. Here we use an arbitrary value of 1500 which will
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
* restart after one full frame is pulled from the buffer. There
* could be several smaller frames in the buffer and if so they will
* not trigger the XON until their total number reduces the buffer
* by 1500.
* - The pause time is fairly large at 1000 x 512ns = 512 usec.
*/
rx_buf_size = igb_get_rx_buffer_size(hw);
hw->fc.high_water = rx_buf_size - (ETHER_MAX_LEN * 2);
hw->fc.low_water = hw->fc.high_water - 1500;
hw->fc.pause_time = IGB_FC_PAUSE_TIME;
hw->fc.send_xon = 1;
/* Set Flow control, use the tunable location if sane */
if ((igb_fc_setting != e1000_fc_none) && (igb_fc_setting < 4))
hw->fc.requested_mode = igb_fc_setting;
else
hw->fc.requested_mode = e1000_fc_none;
/* Issue a global reset */
igb: add PF support Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
igb_pf_reset_hw(hw);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
E1000_WRITE_REG(hw, E1000_WUC, 0);
diag = e1000_init_hw(hw);
if (diag < 0)
remove extra parentheses in return statement fix the error reported by checkpatch: "ERROR: return is not a function, parentheses are not required" remove parentheses in return like: "return (logical expressions)" remove parentheses in return a function like: "return (rte_mempool_lookup(...))" Fixes: 6307b909b8e0 ("lib: remove extra parenthesis after return") Signed-off-by: Huawei Xie <huawei.xie@intel.com>
2016-01-27 13:58:30 +00:00
return diag;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
igb: fix dual vlan ethertype Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Signed-off-by: David Marchand <david.marchand@6wind.com>
2014-02-17 20:21:03 +00:00
E1000_WRITE_REG(hw, E1000_VET, ETHER_TYPE_VLAN << 16 | ETHER_TYPE_VLAN);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
e1000_get_phy_info(hw);
e1000_check_for_link(hw);
remove extra parentheses in return statement fix the error reported by checkpatch: "ERROR: return is not a function, parentheses are not required" remove parentheses in return like: "return (logical expressions)" remove parentheses in return a function like: "return (rte_mempool_lookup(...))" Fixes: 6307b909b8e0 ("lib: remove extra parenthesis after return") Signed-off-by: Huawei Xie <huawei.xie@intel.com>
2016-01-27 13:58:30 +00:00
return 0;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
}
/* This function is based on igb_update_stats_counters() in igb/if_igb.c */
static void
igb: add extended stats Add xstats_get() and xstats_reset() functions to igb driver, and the necessary strings to expose these NIC statistics. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-11-02 10:19:01 +00:00
igb_read_stats_registers(struct e1000_hw *hw, struct e1000_hw_stats *stats)
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
{
int pause_frames;
e1000: remove CRC size from byte counters This patch removes the crc bytes from byte counter statistics. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-11-18 10:48:07 +00:00
uint64_t old_gprc = stats->gprc;
uint64_t old_gptc = stats->gptc;
uint64_t old_tpr = stats->tpr;
uint64_t old_tpt = stats->tpt;
uint64_t old_rpthc = stats->rpthc;
uint64_t old_hgptc = stats->hgptc;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
if(hw->phy.media_type == e1000_media_type_copper ||
(E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_LU)) {
stats->symerrs +=
E1000_READ_REG(hw,E1000_SYMERRS);
stats->sec += E1000_READ_REG(hw, E1000_SEC);
}
stats->crcerrs += E1000_READ_REG(hw, E1000_CRCERRS);
stats->mpc += E1000_READ_REG(hw, E1000_MPC);
stats->scc += E1000_READ_REG(hw, E1000_SCC);
stats->ecol += E1000_READ_REG(hw, E1000_ECOL);
stats->mcc += E1000_READ_REG(hw, E1000_MCC);
stats->latecol += E1000_READ_REG(hw, E1000_LATECOL);
stats->colc += E1000_READ_REG(hw, E1000_COLC);
stats->dc += E1000_READ_REG(hw, E1000_DC);
stats->rlec += E1000_READ_REG(hw, E1000_RLEC);
stats->xonrxc += E1000_READ_REG(hw, E1000_XONRXC);
stats->xontxc += E1000_READ_REG(hw, E1000_XONTXC);
/*
** For watchdog management we need to know if we have been
** paused during the last interval, so capture that here.
*/
pause_frames = E1000_READ_REG(hw, E1000_XOFFRXC);
stats->xoffrxc += pause_frames;
stats->xofftxc += E1000_READ_REG(hw, E1000_XOFFTXC);
stats->fcruc += E1000_READ_REG(hw, E1000_FCRUC);
stats->prc64 += E1000_READ_REG(hw, E1000_PRC64);
stats->prc127 += E1000_READ_REG(hw, E1000_PRC127);
stats->prc255 += E1000_READ_REG(hw, E1000_PRC255);
stats->prc511 += E1000_READ_REG(hw, E1000_PRC511);
stats->prc1023 += E1000_READ_REG(hw, E1000_PRC1023);
stats->prc1522 += E1000_READ_REG(hw, E1000_PRC1522);
stats->gprc += E1000_READ_REG(hw, E1000_GPRC);
stats->bprc += E1000_READ_REG(hw, E1000_BPRC);
stats->mprc += E1000_READ_REG(hw, E1000_MPRC);
stats->gptc += E1000_READ_REG(hw, E1000_GPTC);
/* For the 64-bit byte counters the low dword must be read first. */
/* Both registers clear on the read of the high dword */
e1000: remove CRC size from byte counters This patch removes the crc bytes from byte counter statistics. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-11-18 10:48:07 +00:00
/* Workaround CRC bytes included in size, take away 4 bytes/packet */
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
stats->gorc += E1000_READ_REG(hw, E1000_GORCL);
stats->gorc += ((uint64_t)E1000_READ_REG(hw, E1000_GORCH) << 32);
e1000: remove CRC size from byte counters This patch removes the crc bytes from byte counter statistics. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-11-18 10:48:07 +00:00
stats->gorc -= (stats->gprc - old_gprc) * ETHER_CRC_LEN;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
stats->gotc += E1000_READ_REG(hw, E1000_GOTCL);
stats->gotc += ((uint64_t)E1000_READ_REG(hw, E1000_GOTCH) << 32);
e1000: remove CRC size from byte counters This patch removes the crc bytes from byte counter statistics. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-11-18 10:48:07 +00:00
stats->gotc -= (stats->gptc - old_gptc) * ETHER_CRC_LEN;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
stats->rnbc += E1000_READ_REG(hw, E1000_RNBC);
stats->ruc += E1000_READ_REG(hw, E1000_RUC);
stats->rfc += E1000_READ_REG(hw, E1000_RFC);
stats->roc += E1000_READ_REG(hw, E1000_ROC);
stats->rjc += E1000_READ_REG(hw, E1000_RJC);
e1000: remove CRC size from byte counters This patch removes the crc bytes from byte counter statistics. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-11-18 10:48:07 +00:00
stats->tpr += E1000_READ_REG(hw, E1000_TPR);
stats->tpt += E1000_READ_REG(hw, E1000_TPT);
e1000: fix total byte statistics This patch fixes a bug in reading the 64 bit register reading which was causing the total octets counters to show zero. Now the code reads both the lower and higher 32 bits. Tested in testpmd, byte values are correct. Fixes: 805803445a02 ("e1000: support EM devices (also known as e1000/e1000e)") Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2015-10-22 15:18:04 +00:00
stats->tor += E1000_READ_REG(hw, E1000_TORL);
stats->tor += ((uint64_t)E1000_READ_REG(hw, E1000_TORH) << 32);
e1000: remove CRC size from byte counters This patch removes the crc bytes from byte counter statistics. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-11-18 10:48:07 +00:00
stats->tor -= (stats->tpr - old_tpr) * ETHER_CRC_LEN;
e1000: fix total byte statistics This patch fixes a bug in reading the 64 bit register reading which was causing the total octets counters to show zero. Now the code reads both the lower and higher 32 bits. Tested in testpmd, byte values are correct. Fixes: 805803445a02 ("e1000: support EM devices (also known as e1000/e1000e)") Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2015-10-22 15:18:04 +00:00
stats->tot += E1000_READ_REG(hw, E1000_TOTL);
stats->tot += ((uint64_t)E1000_READ_REG(hw, E1000_TOTH) << 32);
e1000: remove CRC size from byte counters This patch removes the crc bytes from byte counter statistics. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-11-18 10:48:07 +00:00
stats->tot -= (stats->tpt - old_tpt) * ETHER_CRC_LEN;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
stats->ptc64 += E1000_READ_REG(hw, E1000_PTC64);
stats->ptc127 += E1000_READ_REG(hw, E1000_PTC127);
stats->ptc255 += E1000_READ_REG(hw, E1000_PTC255);
stats->ptc511 += E1000_READ_REG(hw, E1000_PTC511);
stats->ptc1023 += E1000_READ_REG(hw, E1000_PTC1023);
stats->ptc1522 += E1000_READ_REG(hw, E1000_PTC1522);
stats->mptc += E1000_READ_REG(hw, E1000_MPTC);
stats->bptc += E1000_READ_REG(hw, E1000_BPTC);
/* Interrupt Counts */
stats->iac += E1000_READ_REG(hw, E1000_IAC);
stats->icrxptc += E1000_READ_REG(hw, E1000_ICRXPTC);
stats->icrxatc += E1000_READ_REG(hw, E1000_ICRXATC);
stats->ictxptc += E1000_READ_REG(hw, E1000_ICTXPTC);
stats->ictxatc += E1000_READ_REG(hw, E1000_ICTXATC);
stats->ictxqec += E1000_READ_REG(hw, E1000_ICTXQEC);
stats->ictxqmtc += E1000_READ_REG(hw, E1000_ICTXQMTC);
stats->icrxdmtc += E1000_READ_REG(hw, E1000_ICRXDMTC);
stats->icrxoc += E1000_READ_REG(hw, E1000_ICRXOC);
/* Host to Card Statistics */
stats->cbtmpc += E1000_READ_REG(hw, E1000_CBTMPC);
stats->htdpmc += E1000_READ_REG(hw, E1000_HTDPMC);
stats->cbrdpc += E1000_READ_REG(hw, E1000_CBRDPC);
stats->cbrmpc += E1000_READ_REG(hw, E1000_CBRMPC);
stats->rpthc += E1000_READ_REG(hw, E1000_RPTHC);
stats->hgptc += E1000_READ_REG(hw, E1000_HGPTC);
stats->htcbdpc += E1000_READ_REG(hw, E1000_HTCBDPC);
stats->hgorc += E1000_READ_REG(hw, E1000_HGORCL);
stats->hgorc += ((uint64_t)E1000_READ_REG(hw, E1000_HGORCH) << 32);
e1000: remove CRC size from byte counters This patch removes the crc bytes from byte counter statistics. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-11-18 10:48:07 +00:00
stats->hgorc -= (stats->rpthc - old_rpthc) * ETHER_CRC_LEN;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
stats->hgotc += E1000_READ_REG(hw, E1000_HGOTCL);
stats->hgotc += ((uint64_t)E1000_READ_REG(hw, E1000_HGOTCH) << 32);
e1000: remove CRC size from byte counters This patch removes the crc bytes from byte counter statistics. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-11-18 10:48:07 +00:00
stats->hgotc -= (stats->hgptc - old_hgptc) * ETHER_CRC_LEN;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
stats->lenerrs += E1000_READ_REG(hw, E1000_LENERRS);
stats->scvpc += E1000_READ_REG(hw, E1000_SCVPC);
stats->hrmpc += E1000_READ_REG(hw, E1000_HRMPC);
stats->algnerrc += E1000_READ_REG(hw, E1000_ALGNERRC);
stats->rxerrc += E1000_READ_REG(hw, E1000_RXERRC);
stats->tncrs += E1000_READ_REG(hw, E1000_TNCRS);
stats->cexterr += E1000_READ_REG(hw, E1000_CEXTERR);
stats->tsctc += E1000_READ_REG(hw, E1000_TSCTC);
stats->tsctfc += E1000_READ_REG(hw, E1000_TSCTFC);
igb: add extended stats Add xstats_get() and xstats_reset() functions to igb driver, and the necessary strings to expose these NIC statistics. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-11-02 10:19:01 +00:00
}
static void
eth_igb_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *rte_stats)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct e1000_hw_stats *stats =
E1000_DEV_PRIVATE_TO_STATS(dev->data->dev_private);
igb_read_stats_registers(hw, stats);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
if (rte_stats == NULL)
return;
/* Rx Errors */
ethdev: add Rx error counters for missed, badcrc and badlen packets Split input error stats to have a better understanding of why packets have been dropped. Keep ierrors field untouched for backward compatibility. Signed-off-by: Ivan Boule <ivan.boule@6wind.com> Signed-off-by: David Marchand <david.marchand@6wind.com> Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2014-06-12 21:55:41 +00:00
rte_stats->imissed = stats->mpc;
e1000: do not report deprecated statistics These fields are marked deprecated don't use them. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2015-11-06 01:04:37 +00:00
rte_stats->ierrors = stats->crcerrs +
stats->rlec + stats->ruc + stats->roc +
ethdev: add Rx error counters for missed, badcrc and badlen packets Split input error stats to have a better understanding of why packets have been dropped. Keep ierrors field untouched for backward compatibility. Signed-off-by: Ivan Boule <ivan.boule@6wind.com> Signed-off-by: David Marchand <david.marchand@6wind.com> Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2014-06-12 21:55:41 +00:00
stats->rxerrc + stats->algnerrc + stats->cexterr;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
/* Tx Errors */
rte_stats->oerrors = stats->ecol + stats->latecol;
rte_stats->ipackets = stats->gprc;
rte_stats->opackets = stats->gptc;
rte_stats->ibytes = stats->gorc;
rte_stats->obytes = stats->gotc;
}
static void
eth_igb_stats_reset(struct rte_eth_dev *dev)
{
struct e1000_hw_stats *hw_stats =
E1000_DEV_PRIVATE_TO_STATS(dev->data->dev_private);
/* HW registers are cleared on read */
eth_igb_stats_get(dev, NULL);
/* Reset software totals */
memset(hw_stats, 0, sizeof(*hw_stats));
}
igb: add extended stats Add xstats_get() and xstats_reset() functions to igb driver, and the necessary strings to expose these NIC statistics. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-11-02 10:19:01 +00:00
static void
eth_igb_xstats_reset(struct rte_eth_dev *dev)
{
struct e1000_hw_stats *stats =
E1000_DEV_PRIVATE_TO_STATS(dev->data->dev_private);
/* HW registers are cleared on read */
eth_igb_xstats_get(dev, NULL, IGB_NB_XSTATS);
/* Reset software totals */
memset(stats, 0, sizeof(*stats));
}
net/igb: fetch extended statistics with integer ids The current extended ethernet statistics fetching involve doing several string operations, which causes performance issues if there are lots of statistics and/or network interfaces. This patch changes the e1000 driver to use the new API that seperates name string and value queries. Signed-off-by: Remy Horton <remy.horton@intel.com>
2016-06-15 15:25:29 +00:00
static int eth_igb_xstats_get_names(__rte_unused struct rte_eth_dev *dev,
struct rte_eth_xstat_name *xstats_names,
net/igb: support xstats by ID To achieve functionality of retrieving only specific statistics given by application there are two new functions added: eth_igb_xstats_get_by_id() which retrieve values of statistics specified by ids array and eth_igb_xstats_get_names_by_id() which retrieve names of statistics specified by ids array. Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
2017-04-27 14:42:39 +00:00
__rte_unused unsigned int size)
net/igb: fetch extended statistics with integer ids The current extended ethernet statistics fetching involve doing several string operations, which causes performance issues if there are lots of statistics and/or network interfaces. This patch changes the e1000 driver to use the new API that seperates name string and value queries. Signed-off-by: Remy Horton <remy.horton@intel.com>
2016-06-15 15:25:29 +00:00
{
unsigned i;
if (xstats_names == NULL)
return IGB_NB_XSTATS;
/* Note: limit checked in rte_eth_xstats_names() */
for (i = 0; i < IGB_NB_XSTATS; i++) {
snprintf(xstats_names[i].name, sizeof(xstats_names[i].name),
"%s", rte_igb_stats_strings[i].name);
}
return IGB_NB_XSTATS;
}
net/igb: support xstats by ID To achieve functionality of retrieving only specific statistics given by application there are two new functions added: eth_igb_xstats_get_by_id() which retrieve values of statistics specified by ids array and eth_igb_xstats_get_names_by_id() which retrieve names of statistics specified by ids array. Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
2017-04-27 14:42:39 +00:00
static int eth_igb_xstats_get_names_by_id(struct rte_eth_dev *dev,
struct rte_eth_xstat_name *xstats_names, const uint64_t *ids,
unsigned int limit)
{
unsigned int i;
if (!ids) {
if (xstats_names == NULL)
return IGB_NB_XSTATS;
for (i = 0; i < IGB_NB_XSTATS; i++)
snprintf(xstats_names[i].name,
sizeof(xstats_names[i].name),
"%s", rte_igb_stats_strings[i].name);
return IGB_NB_XSTATS;
} else {
struct rte_eth_xstat_name xstats_names_copy[IGB_NB_XSTATS];
eth_igb_xstats_get_names_by_id(dev, xstats_names_copy, NULL,
IGB_NB_XSTATS);
for (i = 0; i < limit; i++) {
if (ids[i] >= IGB_NB_XSTATS) {
PMD_INIT_LOG(ERR, "id value isn't valid");
return -1;
}
strcpy(xstats_names[i].name,
xstats_names_copy[ids[i]].name);
}
return limit;
}
}
igb: add extended stats Add xstats_get() and xstats_reset() functions to igb driver, and the necessary strings to expose these NIC statistics. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-11-02 10:19:01 +00:00
static int
ethdev: remove name from extended statistic fetch The current extended ethernet statistics fetching involve doing several string operations, which causes performance issues if there are lots of statistics and/or network interfaces. This patch changes the test-pmd and proc_info applications to use the new xstats API, and removes deprecated code associated with the old API. Signed-off-by: Remy Horton <remy.horton@intel.com>
2016-06-15 15:25:33 +00:00
eth_igb_xstats_get(struct rte_eth_dev *dev, struct rte_eth_xstat *xstats,
igb: add extended stats Add xstats_get() and xstats_reset() functions to igb driver, and the necessary strings to expose these NIC statistics. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-11-02 10:19:01 +00:00
unsigned n)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct e1000_hw_stats *hw_stats =
E1000_DEV_PRIVATE_TO_STATS(dev->data->dev_private);
unsigned i;
if (n < IGB_NB_XSTATS)
return IGB_NB_XSTATS;
igb_read_stats_registers(hw, hw_stats);
/* If this is a reset xstats is NULL, and we have cleared the
* registers by reading them.
*/
if (!xstats)
return 0;
/* Extended stats */
for (i = 0; i < IGB_NB_XSTATS; i++) {
net/igb: fetch extended statistics with integer ids The current extended ethernet statistics fetching involve doing several string operations, which causes performance issues if there are lots of statistics and/or network interfaces. This patch changes the e1000 driver to use the new API that seperates name string and value queries. Signed-off-by: Remy Horton <remy.horton@intel.com>
2016-06-15 15:25:29 +00:00
xstats[i].id = i;
igb: add extended stats Add xstats_get() and xstats_reset() functions to igb driver, and the necessary strings to expose these NIC statistics. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-11-02 10:19:01 +00:00
xstats[i].value = *(uint64_t *)(((char *)hw_stats) +
rte_igb_stats_strings[i].offset);
}
return IGB_NB_XSTATS;
}
net/igb: support xstats by ID To achieve functionality of retrieving only specific statistics given by application there are two new functions added: eth_igb_xstats_get_by_id() which retrieve values of statistics specified by ids array and eth_igb_xstats_get_names_by_id() which retrieve names of statistics specified by ids array. Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
2017-04-27 14:42:39 +00:00
static int
eth_igb_xstats_get_by_id(struct rte_eth_dev *dev, const uint64_t *ids,
uint64_t *values, unsigned int n)
{
unsigned int i;
if (!ids) {
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct e1000_hw_stats *hw_stats =
E1000_DEV_PRIVATE_TO_STATS(dev->data->dev_private);
if (n < IGB_NB_XSTATS)
return IGB_NB_XSTATS;
igb_read_stats_registers(hw, hw_stats);
/* If this is a reset xstats is NULL, and we have cleared the
* registers by reading them.
*/
if (!values)
return 0;
/* Extended stats */
for (i = 0; i < IGB_NB_XSTATS; i++)
values[i] = *(uint64_t *)(((char *)hw_stats) +
rte_igb_stats_strings[i].offset);
return IGB_NB_XSTATS;
} else {
uint64_t values_copy[IGB_NB_XSTATS];
eth_igb_xstats_get_by_id(dev, NULL, values_copy,
IGB_NB_XSTATS);
for (i = 0; i < n; i++) {
if (ids[i] >= IGB_NB_XSTATS) {
PMD_INIT_LOG(ERR, "id value isn't valid");
return -1;
}
values[i] = values_copy[ids[i]];
}
return n;
}
}
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
static void
igbvf: add extended stats Add xstats functionality to igbvf PMD, adding necessary statistic strings. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-11-02 10:19:02 +00:00
igbvf_read_stats_registers(struct e1000_hw *hw, struct e1000_vf_stats *hw_stats)
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
{
/* Good Rx packets, include VF loopback */
UPDATE_VF_STAT(E1000_VFGPRC,
hw_stats->last_gprc, hw_stats->gprc);
/* Good Rx octets, include VF loopback */
UPDATE_VF_STAT(E1000_VFGORC,
hw_stats->last_gorc, hw_stats->gorc);
/* Good Tx packets, include VF loopback */
UPDATE_VF_STAT(E1000_VFGPTC,
hw_stats->last_gptc, hw_stats->gptc);
/* Good Tx octets, include VF loopback */
UPDATE_VF_STAT(E1000_VFGOTC,
hw_stats->last_gotc, hw_stats->gotc);
/* Rx Multicst packets */
UPDATE_VF_STAT(E1000_VFMPRC,
hw_stats->last_mprc, hw_stats->mprc);
/* Good Rx loopback packets */
UPDATE_VF_STAT(E1000_VFGPRLBC,
hw_stats->last_gprlbc, hw_stats->gprlbc);
/* Good Rx loopback octets */
UPDATE_VF_STAT(E1000_VFGORLBC,
hw_stats->last_gorlbc, hw_stats->gorlbc);
/* Good Tx loopback packets */
UPDATE_VF_STAT(E1000_VFGPTLBC,
hw_stats->last_gptlbc, hw_stats->gptlbc);
/* Good Tx loopback octets */
UPDATE_VF_STAT(E1000_VFGOTLBC,
hw_stats->last_gotlbc, hw_stats->gotlbc);
igbvf: add extended stats Add xstats functionality to igbvf PMD, adding necessary statistic strings. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-11-02 10:19:02 +00:00
}
net/igb: fetch extended statistics with integer ids The current extended ethernet statistics fetching involve doing several string operations, which causes performance issues if there are lots of statistics and/or network interfaces. This patch changes the e1000 driver to use the new API that seperates name string and value queries. Signed-off-by: Remy Horton <remy.horton@intel.com>
2016-06-15 15:25:29 +00:00
static int eth_igbvf_xstats_get_names(__rte_unused struct rte_eth_dev *dev,
struct rte_eth_xstat_name *xstats_names,
__rte_unused unsigned limit)
{
unsigned i;
if (xstats_names != NULL)
for (i = 0; i < IGBVF_NB_XSTATS; i++) {
snprintf(xstats_names[i].name,
sizeof(xstats_names[i].name), "%s",
rte_igbvf_stats_strings[i].name);
}
return IGBVF_NB_XSTATS;
}
igbvf: add extended stats Add xstats functionality to igbvf PMD, adding necessary statistic strings. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-11-02 10:19:02 +00:00
static int
ethdev: remove name from extended statistic fetch The current extended ethernet statistics fetching involve doing several string operations, which causes performance issues if there are lots of statistics and/or network interfaces. This patch changes the test-pmd and proc_info applications to use the new xstats API, and removes deprecated code associated with the old API. Signed-off-by: Remy Horton <remy.horton@intel.com>
2016-06-15 15:25:33 +00:00
eth_igbvf_xstats_get(struct rte_eth_dev *dev, struct rte_eth_xstat *xstats,
igbvf: add extended stats Add xstats functionality to igbvf PMD, adding necessary statistic strings. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-11-02 10:19:02 +00:00
unsigned n)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct e1000_vf_stats *hw_stats = (struct e1000_vf_stats *)
E1000_DEV_PRIVATE_TO_STATS(dev->data->dev_private);
unsigned i;
if (n < IGBVF_NB_XSTATS)
return IGBVF_NB_XSTATS;
igbvf_read_stats_registers(hw, hw_stats);
if (!xstats)
return 0;
for (i = 0; i < IGBVF_NB_XSTATS; i++) {
net/igb: fetch extended statistics with integer ids The current extended ethernet statistics fetching involve doing several string operations, which causes performance issues if there are lots of statistics and/or network interfaces. This patch changes the e1000 driver to use the new API that seperates name string and value queries. Signed-off-by: Remy Horton <remy.horton@intel.com>
2016-06-15 15:25:29 +00:00
xstats[i].id = i;
igbvf: add extended stats Add xstats functionality to igbvf PMD, adding necessary statistic strings. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-11-02 10:19:02 +00:00
xstats[i].value = *(uint64_t *)(((char *)hw_stats) +
rte_igbvf_stats_strings[i].offset);
}
return IGBVF_NB_XSTATS;
}
static void
eth_igbvf_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *rte_stats)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct e1000_vf_stats *hw_stats = (struct e1000_vf_stats *)
E1000_DEV_PRIVATE_TO_STATS(dev->data->dev_private);
igbvf_read_stats_registers(hw, hw_stats);
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
if (rte_stats == NULL)
return;
rte_stats->ipackets = hw_stats->gprc;
rte_stats->ibytes = hw_stats->gorc;
rte_stats->opackets = hw_stats->gptc;
rte_stats->obytes = hw_stats->gotc;
}
static void
eth_igbvf_stats_reset(struct rte_eth_dev *dev)
{
struct e1000_vf_stats *hw_stats = (struct e1000_vf_stats*)
E1000_DEV_PRIVATE_TO_STATS(dev->data->dev_private);
/* Sync HW register to the last stats */
eth_igbvf_stats_get(dev, NULL);
/* reset HW current stats*/
memset(&hw_stats->gprc, 0, sizeof(*hw_stats) -
offsetof(struct e1000_vf_stats, gprc));
}
net/e1000: add firmware version get This patch adds a new function eth_igb_fw_version_get. Signed-off-by: Qiming Yang <qiming.yang@intel.com> Acked-by: Remy Horton <remy.horton@intel.com>
2017-01-16 10:48:28 +00:00
static int
eth_igb_fw_version_get(struct rte_eth_dev *dev, char *fw_version,
size_t fw_size)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct e1000_fw_version fw;
int ret;
e1000_get_fw_version(hw, &fw);
switch (hw->mac.type) {
case e1000_i210:
case e1000_i211:
if (!(e1000_get_flash_presence_i210(hw))) {
ret = snprintf(fw_version, fw_size,
"%2d.%2d-%d",
fw.invm_major, fw.invm_minor,
fw.invm_img_type);
break;
}
/* fall through */
default:
/* if option rom is valid, display its version too */
if (fw.or_valid) {
ret = snprintf(fw_version, fw_size,
"%d.%d, 0x%08x, %d.%d.%d",
fw.eep_major, fw.eep_minor, fw.etrack_id,
fw.or_major, fw.or_build, fw.or_patch);
/* no option rom */
} else {
if (fw.etrack_id != 0X0000) {
ret = snprintf(fw_version, fw_size,
"%d.%d, 0x%08x",
fw.eep_major, fw.eep_minor,
fw.etrack_id);
} else {
ret = snprintf(fw_version, fw_size,
"%d.%d.%d",
fw.eep_major, fw.eep_minor,
fw.eep_build);
}
}
break;
}
ret += 1; /* add the size of '\0' */
if (fw_size < (u32)ret)
return ret;
else
return 0;
}
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
static void
igb: add redirection table size in device info As more and more information are different between PF and VF, ops of 'dev_infos_get' has been implemented respectively. In addition, new field of 'reta_size' has been added in 'struct rte_eth_dev_info' for returning redirection table size. Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-11-15 16:03:40 +00:00
eth_igb_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
ethdev: decouple from PCI device This makes struct rte_eth_dev independent of struct rte_pci_device by replacing it with a pointer to the generic struct rte_device. Signed-off-by: Jan Blunck <jblunck@infradead.org> Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
2016-12-23 15:58:11 +00:00
dev_info->pci_dev = RTE_DEV_TO_PCI(dev->device);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
dev_info->min_rx_bufsize = 256; /* See BSIZE field of RCTL register. */
dev_info->max_rx_pktlen = 0x3FFF; /* See RLPML register. */
dev_info->max_mac_addrs = hw->mac.rar_entry_count;
ethdev: add support for device offload capabilities 1) Make device RX and TX offload capabilities to be returned in the rte_eth_dev_info data structure by the function rte_eth_dev_info_get The following initial set of RX offload capabilities are defined: - VLAN header stripping - IPv4 header checksum check - UDP checksum check - TCP checksum check - TCP large receive offload (LRO) The following initial set of TX offload capabilities are defined: - VLAN header insertion - IPv4 header checksum computation - UDP checksum computation - TCP checksum computation - SCTP checksum computation - TCP segmentation offload (Transmit Segmentation Offload) - UDP segmentation offload 2) Update the eth_dev_infos_get() function of the igb and ixgbe PMDs to return the offload capabilities which are supported by the device and that are effectively managed by the driver. Signed-off-by: Ivan Boule <ivan.boule@6wind.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2013-04-16 12:42:33 +00:00
dev_info->rx_offload_capa =
DEV_RX_OFFLOAD_VLAN_STRIP |
DEV_RX_OFFLOAD_IPV4_CKSUM |
DEV_RX_OFFLOAD_UDP_CKSUM |
DEV_RX_OFFLOAD_TCP_CKSUM;
dev_info->tx_offload_capa =
DEV_TX_OFFLOAD_VLAN_INSERT |
DEV_TX_OFFLOAD_IPV4_CKSUM |
DEV_TX_OFFLOAD_UDP_CKSUM |
DEV_TX_OFFLOAD_TCP_CKSUM |
igb: enable TSO support This patch enables igb TSO feature, the feature works on both PF and VF. The TCP segmentation offload needs to write the offload related information into the advanced context descriptors, which is similar to checksum offload. Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2015-10-21 07:55:26 +00:00
DEV_TX_OFFLOAD_SCTP_CKSUM |
DEV_TX_OFFLOAD_TCP_TSO;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
switch (hw->mac.type) {
case e1000_82575:
dev_info->max_rx_queues = 4;
dev_info->max_tx_queues = 4;
igb: add VMDq support Signed-off-by: Intel
2013-09-18 10:00:00 +00:00
dev_info->max_vmdq_pools = 0;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
break;
case e1000_82576:
dev_info->max_rx_queues = 16;
dev_info->max_tx_queues = 16;
igb: add VMDq support Signed-off-by: Intel
2013-09-18 10:00:00 +00:00
dev_info->max_vmdq_pools = ETH_8_POOLS;
igb: new VMDQ argument Assign new VMDQ arguments with correct values. Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-11-04 10:01:25 +00:00
dev_info->vmdq_queue_num = 16;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
break;
case e1000_82580:
dev_info->max_rx_queues = 8;
dev_info->max_tx_queues = 8;
igb: add VMDq support Signed-off-by: Intel
2013-09-18 10:00:00 +00:00
dev_info->max_vmdq_pools = ETH_8_POOLS;
igb: new VMDQ argument Assign new VMDQ arguments with correct values. Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-11-04 10:01:25 +00:00
dev_info->vmdq_queue_num = 8;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
break;
case e1000_i350:
dev_info->max_rx_queues = 8;
dev_info->max_tx_queues = 8;
igb: add VMDq support Signed-off-by: Intel
2013-09-18 10:00:00 +00:00
dev_info->max_vmdq_pools = ETH_8_POOLS;
igb: new VMDQ argument Assign new VMDQ arguments with correct values. Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-11-04 10:01:25 +00:00
dev_info->vmdq_queue_num = 8;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
break;
igb: add i354 support Signed-off-by: Intel
2013-11-08 02:00:00 +00:00
case e1000_i354:
dev_info->max_rx_queues = 8;
dev_info->max_tx_queues = 8;
break;
igb: more supported devices Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
case e1000_i210:
dev_info->max_rx_queues = 4;
dev_info->max_tx_queues = 4;
igb: add VMDq support Signed-off-by: Intel
2013-09-18 10:00:00 +00:00
dev_info->max_vmdq_pools = 0;
igb: more supported devices Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
break;
igb: fix i211 support igb_ethdev.c contains function eth_igb_infos_get() which should set number of tx/rx queues supported by the hardware. It contains huge [switch] but there is no i211 case! Also, there are few other places which mention i210, but not mention i211. I didn't check it enough to say it is totally correct. For now I see that it just able to send and receive some packets. Signed-off-by: Sergey Mironov <grrwlf@gmail.com> Reviewed-by: Helin Zhang <helin.zhang@intel.com> [Thomas: fix indent] Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-09-04 08:35:11 +00:00
case e1000_i211:
dev_info->max_rx_queues = 2;
dev_info->max_tx_queues = 2;
dev_info->max_vmdq_pools = 0;
break;
igb: add redirection table size in device info As more and more information are different between PF and VF, ops of 'dev_infos_get' has been implemented respectively. In addition, new field of 'reta_size' has been added in 'struct rte_eth_dev_info' for returning redirection table size. Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-11-15 16:03:40 +00:00
default:
/* Should not happen */
break;
}
ethdev: add the hash key size per device To support querying hash key size per port, an new field of 'hash_key_size' was added in 'struct rte_eth_dev_info' for storing hash key size in bytes. The correct hash key size in bytes should be filled into the 'struct rte_eth_dev_info', to support querying it. Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-06-12 07:33:56 +00:00
dev_info->hash_key_size = IGB_HKEY_MAX_INDEX * sizeof(uint32_t);
igb: add redirection table size in device info As more and more information are different between PF and VF, ops of 'dev_infos_get' has been implemented respectively. In addition, new field of 'reta_size' has been added in 'struct rte_eth_dev_info' for returning redirection table size. Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-11-15 16:03:40 +00:00
dev_info->reta_size = ETH_RSS_RETA_SIZE_128;
ethdev: unification of RSS offload types RSS offload types were defined separately for 1/10G and 40G NICs, and have no relationship with flow types. The modifications are to unify all RSS offload types for all PMDs. Unified RSS offload types have new and common names which can be used for any PMD or applications, and decouple from specific hardwares. Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Jingjing Wu <jingjing.wu@intel.com> [Thomas: merge with fm10k] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2015-02-04 07:16:32 +00:00
dev_info->flow_type_rss_offloads = IGB_RSS_OFFLOAD_ALL;
igb: add redirection table size in device info As more and more information are different between PF and VF, ops of 'dev_infos_get' has been implemented respectively. In addition, new field of 'reta_size' has been added in 'struct rte_eth_dev_info' for returning redirection table size. Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-11-15 16:03:40 +00:00
dev_info->default_rxconf = (struct rte_eth_rxconf) {
.rx_thresh = {
.pthresh = IGB_DEFAULT_RX_PTHRESH,
.hthresh = IGB_DEFAULT_RX_HTHRESH,
.wthresh = IGB_DEFAULT_RX_WTHRESH,
},
.rx_free_thresh = IGB_DEFAULT_RX_FREE_THRESH,
.rx_drop_en = 0,
};
dev_info->default_txconf = (struct rte_eth_txconf) {
.tx_thresh = {
.pthresh = IGB_DEFAULT_TX_PTHRESH,
.hthresh = IGB_DEFAULT_TX_HTHRESH,
.wthresh = IGB_DEFAULT_TX_WTHRESH,
},
.txq_flags = 0,
};
e1000: get queue info and descriptor limits Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Acked-by: Remy Horton <remy.horton@intel.com>
2015-10-27 12:51:46 +00:00
dev_info->rx_desc_lim = rx_desc_lim;
dev_info->tx_desc_lim = tx_desc_lim;
ethdev: add speed capabilities The speed capabilities of a device can be retrieved with rte_eth_dev_info_get(). The new field speed_capa is initialized in the drivers without taking care of device characteristics in this patch. When the capabilities of a driver are accurate, the table in overview.rst must be filled. Signed-off-by: Marc Sune <marcdevel@gmail.com>
2016-03-31 22:12:28 +00:00
dev_info->speed_capa = ETH_LINK_SPEED_10M_HD | ETH_LINK_SPEED_10M |
ETH_LINK_SPEED_100M_HD | ETH_LINK_SPEED_100M |
ETH_LINK_SPEED_1G;
igb: add redirection table size in device info As more and more information are different between PF and VF, ops of 'dev_infos_get' has been implemented respectively. In addition, new field of 'reta_size' has been added in 'struct rte_eth_dev_info' for returning redirection table size. Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-11-15 16:03:40 +00:00
}
ethdev: query supported packet types Add a new API rte_eth_dev_get_supported_ptypes to query what packet types can be filled by a given device. The device should be already started or its PMD RX burst function already decided, since the packet types supported may vary depending on RX function. Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
2016-03-14 20:50:50 +00:00
static const uint32_t *
eth_igb_supported_ptypes_get(struct rte_eth_dev *dev)
{
static const uint32_t ptypes[] = {
/* refers to igb_rxd_pkt_info_to_pkt_type() */
RTE_PTYPE_L2_ETHER,
RTE_PTYPE_L3_IPV4,
RTE_PTYPE_L3_IPV4_EXT,
RTE_PTYPE_L3_IPV6,
RTE_PTYPE_L3_IPV6_EXT,
RTE_PTYPE_L4_TCP,
RTE_PTYPE_L4_UDP,
RTE_PTYPE_L4_SCTP,
RTE_PTYPE_TUNNEL_IP,
RTE_PTYPE_INNER_L3_IPV6,
RTE_PTYPE_INNER_L3_IPV6_EXT,
RTE_PTYPE_INNER_L4_TCP,
RTE_PTYPE_INNER_L4_UDP,
RTE_PTYPE_UNKNOWN
};
if (dev->rx_pkt_burst == eth_igb_recv_pkts ||
dev->rx_pkt_burst == eth_igb_recv_scattered_pkts)
return ptypes;
return NULL;
}
igb: add redirection table size in device info As more and more information are different between PF and VF, ops of 'dev_infos_get' has been implemented respectively. In addition, new field of 'reta_size' has been added in 'struct rte_eth_dev_info' for returning redirection table size. Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-11-15 16:03:40 +00:00
static void
eth_igbvf_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
ethdev: decouple from PCI device This makes struct rte_eth_dev independent of struct rte_pci_device by replacing it with a pointer to the generic struct rte_device. Signed-off-by: Jan Blunck <jblunck@infradead.org> Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
2016-12-23 15:58:11 +00:00
dev_info->pci_dev = RTE_DEV_TO_PCI(dev->device);
igb: add redirection table size in device info As more and more information are different between PF and VF, ops of 'dev_infos_get' has been implemented respectively. In addition, new field of 'reta_size' has been added in 'struct rte_eth_dev_info' for returning redirection table size. Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-11-15 16:03:40 +00:00
dev_info->min_rx_bufsize = 256; /* See BSIZE field of RCTL register. */
dev_info->max_rx_pktlen = 0x3FFF; /* See RLPML register. */
dev_info->max_mac_addrs = hw->mac.rar_entry_count;
dev_info->rx_offload_capa = DEV_RX_OFFLOAD_VLAN_STRIP |
DEV_RX_OFFLOAD_IPV4_CKSUM |
DEV_RX_OFFLOAD_UDP_CKSUM |
DEV_RX_OFFLOAD_TCP_CKSUM;
dev_info->tx_offload_capa = DEV_TX_OFFLOAD_VLAN_INSERT |
DEV_TX_OFFLOAD_IPV4_CKSUM |
DEV_TX_OFFLOAD_UDP_CKSUM |
DEV_TX_OFFLOAD_TCP_CKSUM |
igb: enable TSO support This patch enables igb TSO feature, the feature works on both PF and VF. The TCP segmentation offload needs to write the offload related information into the advanced context descriptors, which is similar to checksum offload. Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2015-10-21 07:55:26 +00:00
DEV_TX_OFFLOAD_SCTP_CKSUM |
DEV_TX_OFFLOAD_TCP_TSO;
igb: add redirection table size in device info As more and more information are different between PF and VF, ops of 'dev_infos_get' has been implemented respectively. In addition, new field of 'reta_size' has been added in 'struct rte_eth_dev_info' for returning redirection table size. Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-11-15 16:03:40 +00:00
switch (hw->mac.type) {
igb: more supported devices Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
case e1000_vfadapt:
dev_info->max_rx_queues = 2;
dev_info->max_tx_queues = 2;
break;
case e1000_vfadapt_i350:
dev_info->max_rx_queues = 1;
dev_info->max_tx_queues = 1;
break;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
default:
/* Should not happen */
igb: add redirection table size in device info As more and more information are different between PF and VF, ops of 'dev_infos_get' has been implemented respectively. In addition, new field of 'reta_size' has been added in 'struct rte_eth_dev_info' for returning redirection table size. Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-11-15 16:03:40 +00:00
break;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
}
igb: set default Rx/Tx configuration Many sample apps use duplicated code to set rte_eth_txconf and rte_eth_rxconf structures. This patch allows the user to get a default optimal RX/TX configuration through rte_eth_dev_info get, and still any parameters may be tweaked as wished, before setting up queues. Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Reviewed-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: David Marchand <david.marchand@6wind.com> [Thomas: split patch]
2014-10-01 09:49:04 +00:00
dev_info->default_rxconf = (struct rte_eth_rxconf) {
.rx_thresh = {
.pthresh = IGB_DEFAULT_RX_PTHRESH,
.hthresh = IGB_DEFAULT_RX_HTHRESH,
.wthresh = IGB_DEFAULT_RX_WTHRESH,
},
.rx_free_thresh = IGB_DEFAULT_RX_FREE_THRESH,
.rx_drop_en = 0,
};
dev_info->default_txconf = (struct rte_eth_txconf) {
.tx_thresh = {
.pthresh = IGB_DEFAULT_TX_PTHRESH,
.hthresh = IGB_DEFAULT_TX_HTHRESH,
.wthresh = IGB_DEFAULT_TX_WTHRESH,
},
.txq_flags = 0,
};
e1000: get queue info and descriptor limits Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Acked-by: Remy Horton <remy.horton@intel.com>
2015-10-27 12:51:46 +00:00
dev_info->rx_desc_lim = rx_desc_lim;
dev_info->tx_desc_lim = tx_desc_lim;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
}
/* return 0 means link status changed, -1 means not changed */
static int
eth_igb_link_update(struct rte_eth_dev *dev, int wait_to_complete)
{
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct rte_eth_link link, old;
int link_check, count;
link_check = 0;
hw->mac.get_link_status = 1;
/* possible wait-to-complete in up to 9 seconds */
for (count = 0; count < IGB_LINK_UPDATE_CHECK_TIMEOUT; count ++) {
/* Read the real link status */
switch (hw->phy.media_type) {
case e1000_media_type_copper:
/* Do the work to read phy */
e1000_check_for_link(hw);
link_check = !hw->mac.get_link_status;
break;
case e1000_media_type_fiber:
e1000_check_for_link(hw);
link_check = (E1000_READ_REG(hw, E1000_STATUS) &
E1000_STATUS_LU);
break;
case e1000_media_type_internal_serdes:
e1000_check_for_link(hw);
link_check = hw->mac.serdes_has_link;
break;
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
/* VF device is type_unknown */
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
case e1000_media_type_unknown:
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
eth_igbvf_link_update(hw);
link_check = !hw->mac.get_link_status;
break;
default:
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
break;
}
if (link_check || wait_to_complete == 0)
break;
rte_delay_ms(IGB_LINK_UPDATE_CHECK_INTERVAL);
}
memset(&link, 0, sizeof(link));
rte_igb_dev_atomic_read_link_status(dev, &link);
old = link;
/* Now we check if a transition has happened */
if (link_check) {
ethdev: redesign link speed config This patch redesigns the API to set the link speed/s configuration of an ethernet port. Specifically: - it allows to define a set of advertised speeds for auto-negociation. - it allows to disable link auto-negociation (single fixed speed). - default: auto-negociate all supported speeds. A flag autoneg in struct rte_eth_link indicates if link speed was a result of auto-negociation or was fixed by configuration. Signed-off-by: Marc Sune <marcdevel@gmail.com> Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com> Tested-by: Beilei Xing <beilei.xing@intel.com> Tested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
2016-03-31 22:12:29 +00:00
uint16_t duplex, speed;
hw->mac.ops.get_link_up_info(hw, &speed, &duplex);
link.link_duplex = (duplex == FULL_DUPLEX) ?
ETH_LINK_FULL_DUPLEX :
ETH_LINK_HALF_DUPLEX;
link.link_speed = speed;
ethdev: use constants for link state Define and use ETH_LINK_UP and ETH_LINK_DOWN where appropriate. Signed-off-by: Marc Sune <marcdevel@gmail.com> Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2016-03-31 22:12:24 +00:00
link.link_status = ETH_LINK_UP;
ethdev: redesign link speed config This patch redesigns the API to set the link speed/s configuration of an ethernet port. Specifically: - it allows to define a set of advertised speeds for auto-negociation. - it allows to disable link auto-negociation (single fixed speed). - default: auto-negociate all supported speeds. A flag autoneg in struct rte_eth_link indicates if link speed was a result of auto-negociation or was fixed by configuration. Signed-off-by: Marc Sune <marcdevel@gmail.com> Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com> Tested-by: Beilei Xing <beilei.xing@intel.com> Tested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
2016-03-31 22:12:29 +00:00
link.link_autoneg = !(dev->data->dev_conf.link_speeds &
ETH_LINK_SPEED_FIXED);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
} else if (!link_check) {
link.link_speed = 0;
ethdev: use constants for link duplex Some duplex values are replaced from 0 to half-duplex when link is down. Some drivers are still using their own constants for duplex modes. Signed-off-by: Marc Sune <marcdevel@gmail.com>
2016-03-31 22:12:25 +00:00
link.link_duplex = ETH_LINK_HALF_DUPLEX;
ethdev: use constants for link state Define and use ETH_LINK_UP and ETH_LINK_DOWN where appropriate. Signed-off-by: Marc Sune <marcdevel@gmail.com> Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2016-03-31 22:12:24 +00:00
link.link_status = ETH_LINK_DOWN;
ethdev: redesign link speed config This patch redesigns the API to set the link speed/s configuration of an ethernet port. Specifically: - it allows to define a set of advertised speeds for auto-negociation. - it allows to disable link auto-negociation (single fixed speed). - default: auto-negociate all supported speeds. A flag autoneg in struct rte_eth_link indicates if link speed was a result of auto-negociation or was fixed by configuration. Signed-off-by: Marc Sune <marcdevel@gmail.com> Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com> Tested-by: Beilei Xing <beilei.xing@intel.com> Tested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
2016-03-31 22:12:29 +00:00
link.link_autoneg = ETH_LINK_SPEED_FIXED;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
}
rte_igb_dev_atomic_write_link_status(dev, &link);
/* not changed */
if (old.link_status == link.link_status)
return -1;
/* changed */
return 0;
}
/*
* igb_hw_control_acquire sets CTRL_EXT:DRV_LOAD bit.
* For ASF and Pass Through versions of f/w this means
* that the driver is loaded.
*/
static void
igb_hw_control_acquire(struct e1000_hw *hw)
{
uint32_t ctrl_ext;
/* Let firmware know the driver has taken over */
ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
}
/*
* igb_hw_control_release resets CTRL_EXT:DRV_LOAD bit.
* For ASF and Pass Through versions of f/w this means that the
* driver is no longer loaded.
*/
static void
igb_hw_control_release(struct e1000_hw *hw)
{
uint32_t ctrl_ext;
/* Let firmware taken over control of h/w */
ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
E1000_WRITE_REG(hw, E1000_CTRL_EXT,
ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
}
/*
* Bit of a misnomer, what this really means is
* to enable OS management of the system... aka
* to disable special hardware management features.
*/
static void
igb_init_manageability(struct e1000_hw *hw)
{
if (e1000_enable_mng_pass_thru(hw)) {
uint32_t manc2h = E1000_READ_REG(hw, E1000_MANC2H);
uint32_t manc = E1000_READ_REG(hw, E1000_MANC);
/* disable hardware interception of ARP */
manc &= ~(E1000_MANC_ARP_EN);
/* enable receiving management packets to the host */
manc |= E1000_MANC_EN_MNG2HOST;
manc2h |= 1 << 5; /* Mng Port 623 */
manc2h |= 1 << 6; /* Mng Port 664 */
E1000_WRITE_REG(hw, E1000_MANC2H, manc2h);
E1000_WRITE_REG(hw, E1000_MANC, manc);
}
}
static void
igb_release_manageability(struct e1000_hw *hw)
{
if (e1000_enable_mng_pass_thru(hw)) {
uint32_t manc = E1000_READ_REG(hw, E1000_MANC);
manc |= E1000_MANC_ARP_EN;
manc &= ~E1000_MANC_EN_MNG2HOST;
E1000_WRITE_REG(hw, E1000_MANC, manc);
}
}
static void
eth_igb_promiscuous_enable(struct rte_eth_dev *dev)
{
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
uint32_t rctl;
rctl = E1000_READ_REG(hw, E1000_RCTL);
rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
E1000_WRITE_REG(hw, E1000_RCTL, rctl);
}
static void
eth_igb_promiscuous_disable(struct rte_eth_dev *dev)
{
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
uint32_t rctl;
rctl = E1000_READ_REG(hw, E1000_RCTL);
rctl &= (~E1000_RCTL_UPE);
if (dev->data->all_multicast == 1)
rctl |= E1000_RCTL_MPE;
else
rctl &= (~E1000_RCTL_MPE);
E1000_WRITE_REG(hw, E1000_RCTL, rctl);
}
static void
eth_igb_allmulticast_enable(struct rte_eth_dev *dev)
{
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
uint32_t rctl;
rctl = E1000_READ_REG(hw, E1000_RCTL);
rctl |= E1000_RCTL_MPE;
E1000_WRITE_REG(hw, E1000_RCTL, rctl);
}
static void
eth_igb_allmulticast_disable(struct rte_eth_dev *dev)
{
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
uint32_t rctl;
if (dev->data->promiscuous == 1)
return; /* must remain in all_multicast mode */
rctl = E1000_READ_REG(hw, E1000_RCTL);
rctl &= (~E1000_RCTL_MPE);
E1000_WRITE_REG(hw, E1000_RCTL, rctl);
}
e1000: add vlan offload support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
static int
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
eth_igb_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
{
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct e1000_vfta * shadow_vfta =
E1000_DEV_PRIVATE_TO_VFTA(dev->data->dev_private);
uint32_t vfta;
uint32_t vid_idx;
uint32_t vid_bit;
vid_idx = (uint32_t) ((vlan_id >> E1000_VFTA_ENTRY_SHIFT) &
E1000_VFTA_ENTRY_MASK);
vid_bit = (uint32_t) (1 << (vlan_id & E1000_VFTA_ENTRY_BIT_SHIFT_MASK));
vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, vid_idx);
if (on)
vfta |= vid_bit;
else
vfta &= ~vid_bit;
E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, vid_idx, vfta);
/* update local VFTA copy */
shadow_vfta->vfta[vid_idx] = vfta;
e1000: add vlan offload support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
return 0;
}
ethdev: add vlan type when setting ether type In order to set ether type of VLAN for single VLAN, inner and outer VLAN, the VLAN type as an input parameter is added to 'rte_eth_dev_set_vlan_ether_type()'. In addition, corresponding changes in e1000, ixgbe and i40e are also added. It is an ABI break but ethdev library is already bumped for 16.04. Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2016-03-11 16:50:57 +00:00
static int
eth_igb_vlan_tpid_set(struct rte_eth_dev *dev,
enum rte_vlan_type vlan_type,
uint16_t tpid)
e1000: add vlan offload support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
{
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
net/e1000: configure outer VLAN TPID field This patch enables configuring the outer TPID for double VLAN. Note that all other TPID values, for single VLANs or inner VLAN in the QinQ case, are read only. Signed-off-by: Beilei Xing <beilei.xing@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2016-06-16 13:36:28 +00:00
uint32_t reg, qinq;
qinq = E1000_READ_REG(hw, E1000_CTRL_EXT);
qinq &= E1000_CTRL_EXT_EXT_VLAN;
ethdev: add vlan type when setting ether type In order to set ether type of VLAN for single VLAN, inner and outer VLAN, the VLAN type as an input parameter is added to 'rte_eth_dev_set_vlan_ether_type()'. In addition, corresponding changes in e1000, ixgbe and i40e are also added. It is an ABI break but ethdev library is already bumped for 16.04. Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2016-03-11 16:50:57 +00:00
net/e1000: configure outer VLAN TPID field This patch enables configuring the outer TPID for double VLAN. Note that all other TPID values, for single VLANs or inner VLAN in the QinQ case, are read only. Signed-off-by: Beilei Xing <beilei.xing@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2016-06-16 13:36:28 +00:00
/* only outer TPID of double VLAN can be configured*/
if (qinq && vlan_type == ETH_VLAN_TYPE_OUTER) {
reg = E1000_READ_REG(hw, E1000_VET);
reg = (reg & (~E1000_VET_VET_EXT)) |
((uint32_t)tpid << E1000_VET_VET_EXT_SHIFT);
ethdev: add vlan type when setting ether type In order to set ether type of VLAN for single VLAN, inner and outer VLAN, the VLAN type as an input parameter is added to 'rte_eth_dev_set_vlan_ether_type()'. In addition, corresponding changes in e1000, ixgbe and i40e are also added. It is an ABI break but ethdev library is already bumped for 16.04. Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2016-03-11 16:50:57 +00:00
E1000_WRITE_REG(hw, E1000_VET, reg);
net/e1000: configure outer VLAN TPID field This patch enables configuring the outer TPID for double VLAN. Note that all other TPID values, for single VLANs or inner VLAN in the QinQ case, are read only. Signed-off-by: Beilei Xing <beilei.xing@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2016-06-16 13:36:28 +00:00
return 0;
ethdev: add vlan type when setting ether type In order to set ether type of VLAN for single VLAN, inner and outer VLAN, the VLAN type as an input parameter is added to 'rte_eth_dev_set_vlan_ether_type()'. In addition, corresponding changes in e1000, ixgbe and i40e are also added. It is an ABI break but ethdev library is already bumped for 16.04. Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2016-03-11 16:50:57 +00:00
}
e1000: add vlan offload support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
net/e1000: configure outer VLAN TPID field This patch enables configuring the outer TPID for double VLAN. Note that all other TPID values, for single VLANs or inner VLAN in the QinQ case, are read only. Signed-off-by: Beilei Xing <beilei.xing@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2016-06-16 13:36:28 +00:00
/* all other TPID values are read-only*/
PMD_DRV_LOG(ERR, "Not supported");
return -ENOTSUP;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
}
static void
e1000: add vlan offload support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
igb_vlan_hw_filter_disable(struct rte_eth_dev *dev)
{
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
uint32_t reg;
/* Filter Table Disable */
reg = E1000_READ_REG(hw, E1000_RCTL);
reg &= ~E1000_RCTL_CFIEN;
reg &= ~E1000_RCTL_VFE;
E1000_WRITE_REG(hw, E1000_RCTL, reg);
}
static void
igb_vlan_hw_filter_enable(struct rte_eth_dev *dev)
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
{
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct e1000_vfta * shadow_vfta =
E1000_DEV_PRIVATE_TO_VFTA(dev->data->dev_private);
uint32_t reg;
int i;
e1000: add vlan offload support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
/* Filter Table Enable, CFI not used for packet acceptance */
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
reg = E1000_READ_REG(hw, E1000_RCTL);
reg &= ~E1000_RCTL_CFIEN;
reg |= E1000_RCTL_VFE;
E1000_WRITE_REG(hw, E1000_RCTL, reg);
/* restore VFTA table */
e1000: add vlan offload support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
for (i = 0; i < IGB_VFTA_SIZE; i++)
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, i, shadow_vfta->vfta[i]);
}
static void
e1000: add vlan offload support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
igb_vlan_hw_strip_disable(struct rte_eth_dev *dev)
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
{
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
uint32_t reg;
e1000: add vlan offload support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
/* VLAN Mode Disable */
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
reg = E1000_READ_REG(hw, E1000_CTRL);
reg &= ~E1000_CTRL_VME;
E1000_WRITE_REG(hw, E1000_CTRL, reg);
e1000: add vlan offload support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
}
static void
igb_vlan_hw_strip_enable(struct rte_eth_dev *dev)
{
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
uint32_t reg;
/* VLAN Mode Enable */
reg = E1000_READ_REG(hw, E1000_CTRL);
reg |= E1000_CTRL_VME;
E1000_WRITE_REG(hw, E1000_CTRL, reg);
}
static void
igb_vlan_hw_extend_disable(struct rte_eth_dev *dev)
{
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
uint32_t reg;
/* CTRL_EXT: Extended VLAN */
reg = E1000_READ_REG(hw, E1000_CTRL_EXT);
reg &= ~E1000_CTRL_EXT_EXTEND_VLAN;
E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg);
igb: fix max RX packet size and support dual VLAN When in 'normal' mode, hardware is designed to receive up to 1522 bytes. When in 'jumbo' mode, RLPML register must be updated so that hardware accepts a 802.1q vlan header. If dual vlan is enabled, then a second vlan header is expected, so update RLPML register according to dual vlan support. Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
/* Update maximum packet length */
if (dev->data->dev_conf.rxmode.jumbo_frame == 1)
E1000_WRITE_REG(hw, E1000_RLPML,
dev->data->dev_conf.rxmode.max_rx_pkt_len +
VLAN_TAG_SIZE);
e1000: add vlan offload support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
}
static void
igb_vlan_hw_extend_enable(struct rte_eth_dev *dev)
{
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
uint32_t reg;
/* CTRL_EXT: Extended VLAN */
reg = E1000_READ_REG(hw, E1000_CTRL_EXT);
reg |= E1000_CTRL_EXT_EXTEND_VLAN;
E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg);
igb: fix max RX packet size and support dual VLAN When in 'normal' mode, hardware is designed to receive up to 1522 bytes. When in 'jumbo' mode, RLPML register must be updated so that hardware accepts a 802.1q vlan header. If dual vlan is enabled, then a second vlan header is expected, so update RLPML register according to dual vlan support. Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
/* Update maximum packet length */
if (dev->data->dev_conf.rxmode.jumbo_frame == 1)
E1000_WRITE_REG(hw, E1000_RLPML,
dev->data->dev_conf.rxmode.max_rx_pkt_len +
2 * VLAN_TAG_SIZE);
e1000: add vlan offload support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
}
static void
eth_igb_vlan_offload_set(struct rte_eth_dev *dev, int mask)
{
if(mask & ETH_VLAN_STRIP_MASK){
if (dev->data->dev_conf.rxmode.hw_vlan_strip)
igb_vlan_hw_strip_enable(dev);
else
igb_vlan_hw_strip_disable(dev);
}
remove trailing whitespaces This commit removes trailing whitespace from lines in files. Almost all files are affected, as the BSD license copyright header had trailing whitespace on 4 lines in it [hence the number of files reporting 8 lines changed in the diffstat]. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> [Thomas: remove spaces before tabs in libs] [Thomas: remove more trailing spaces in non-C files] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-03 23:42:50 +00:00
e1000: add vlan offload support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
if(mask & ETH_VLAN_FILTER_MASK){
if (dev->data->dev_conf.rxmode.hw_vlan_filter)
igb_vlan_hw_filter_enable(dev);
else
igb_vlan_hw_filter_disable(dev);
}
remove trailing whitespaces This commit removes trailing whitespace from lines in files. Almost all files are affected, as the BSD license copyright header had trailing whitespace on 4 lines in it [hence the number of files reporting 8 lines changed in the diffstat]. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> [Thomas: remove spaces before tabs in libs] [Thomas: remove more trailing spaces in non-C files] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-03 23:42:50 +00:00
e1000: add vlan offload support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
if(mask & ETH_VLAN_EXTEND_MASK){
if (dev->data->dev_conf.rxmode.hw_vlan_extend)
igb_vlan_hw_extend_enable(dev);
else
igb_vlan_hw_extend_disable(dev);
}
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
}
/**
* It enables the interrupt mask and then enable the interrupt.
*
* @param dev
* Pointer to struct rte_eth_dev.
*
* @return
* - On success, zero.
* - On failure, a negative value.
*/
static int
pci: rework interrupt handling Signed-off-by: Intel <intel.com>
2013-06-03 00:00:00 +00:00
eth_igb_lsc_interrupt_setup(struct rte_eth_dev *dev)
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
{
pci: rework interrupt handling Signed-off-by: Intel <intel.com>
2013-06-03 00:00:00 +00:00
struct e1000_interrupt *intr =
E1000_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
pci: rework interrupt handling Signed-off-by: Intel <intel.com>
2013-06-03 00:00:00 +00:00
intr->mask |= E1000_ICR_LSC;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
return 0;
}
igb: enable Rx queue interrupts for PF The patch does below for igb PF: - Setup NIC to generate MSI-X interrupts - Set the IVAR register to map interrupt causes to vectors - Implement interrupt enable/disable functions Signed-off-by: Danny Zhou <danny.zhou@intel.com> Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-07-20 03:02:28 +00:00
/* It clears the interrupt causes and enables the interrupt.
* It will be called once only during nic initialized.
*
* @param dev
* Pointer to struct rte_eth_dev.
*
* @return
* - On success, zero.
* - On failure, a negative value.
*/
static int eth_igb_rxq_interrupt_setup(struct rte_eth_dev *dev)
{
uint32_t mask, regval;
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct rte_eth_dev_info dev_info;
memset(&dev_info, 0, sizeof(dev_info));
eth_igb_infos_get(dev, &dev_info);
mask = 0xFFFFFFFF >> (32 - dev_info.max_rx_queues);
regval = E1000_READ_REG(hw, E1000_EIMS);
E1000_WRITE_REG(hw, E1000_EIMS, regval | mask);
return 0;
}
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
/*
* It reads ICR and gets interrupt causes, check it and set a bit flag
* to update link status.
*
* @param dev
* Pointer to struct rte_eth_dev.
*
* @return
* - On success, zero.
* - On failure, a negative value.
*/
static int
eth_igb_interrupt_get_status(struct rte_eth_dev *dev)
{
uint32_t icr;
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct e1000_interrupt *intr =
E1000_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
pci: rework interrupt handling Signed-off-by: Intel <intel.com>
2013-06-03 00:00:00 +00:00
igb_intr_disable(hw);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
/* read-on-clear nic registers here */
icr = E1000_READ_REG(hw, E1000_ICR);
pci: rework interrupt handling Signed-off-by: Intel <intel.com>
2013-06-03 00:00:00 +00:00
intr->flags = 0;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
if (icr & E1000_ICR_LSC) {
intr->flags |= E1000_FLAG_NEED_LINK_UPDATE;
}
remove trailing whitespaces This commit removes trailing whitespace from lines in files. Almost all files are affected, as the BSD license copyright header had trailing whitespace on 4 lines in it [hence the number of files reporting 8 lines changed in the diffstat]. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> [Thomas: remove spaces before tabs in libs] [Thomas: remove more trailing spaces in non-C files] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-03 23:42:50 +00:00
if (icr & E1000_ICR_VMMB)
igb: add PF support Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
intr->flags |= E1000_FLAG_MAILBOX;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
return 0;
}
/*
* It executes link_update after knowing an interrupt is prsent.
*
* @param dev
* Pointer to struct rte_eth_dev.
*
* @return
* - On success, zero.
* - On failure, a negative value.
*/
static int
net/e1000: localize mapping of ethdev to PCI device Create one macro for where PCI device information is extracted from ethernet device. Makes later changes easier to review, and test. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jan Blunck <jblunck@infradead.org>
2016-12-23 15:57:56 +00:00
eth_igb_interrupt_action(struct rte_eth_dev *dev,
struct rte_intr_handle *intr_handle)
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
{
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct e1000_interrupt *intr =
E1000_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
net/e1000: localize mapping of ethdev to PCI device Create one macro for where PCI device information is extracted from ethernet device. Makes later changes easier to review, and test. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jan Blunck <jblunck@infradead.org>
2016-12-23 15:57:56 +00:00
struct rte_pci_device *pci_dev = E1000_DEV_TO_PCI(dev);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
uint32_t tctl, rctl;
struct rte_eth_link link;
int ret;
igb: add PF support Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
if (intr->flags & E1000_FLAG_MAILBOX) {
igb_pf_mbx_process(dev);
intr->flags &= ~E1000_FLAG_MAILBOX;
}
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
pci: rework interrupt handling Signed-off-by: Intel <intel.com>
2013-06-03 00:00:00 +00:00
igb_intr_enable(dev);
net/e1000: localize mapping of ethdev to PCI device Create one macro for where PCI device information is extracted from ethernet device. Makes later changes easier to review, and test. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jan Blunck <jblunck@infradead.org>
2016-12-23 15:57:56 +00:00
rte_intr_enable(intr_handle);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
pci: rework interrupt handling Signed-off-by: Intel <intel.com>
2013-06-03 00:00:00 +00:00
if (intr->flags & E1000_FLAG_NEED_LINK_UPDATE) {
intr->flags &= ~E1000_FLAG_NEED_LINK_UPDATE;
/* set get_link_status to check register later */
hw->mac.get_link_status = 1;
ret = eth_igb_link_update(dev, 0);
/* check if link has changed */
if (ret < 0)
return 0;
memset(&link, 0, sizeof(link));
rte_igb_dev_atomic_read_link_status(dev, &link);
if (link.link_status) {
PMD_INIT_LOG(INFO,
e1000: clean log messages - remove leading \n in some messages, - remove trailing \n in some messages, - split multi lines messages, - introduce PMD_INIT_FUNC_TRACE macro and use it instead of PMD_INIT_LOG(DEBUG, "some_func") Signed-off-by: David Marchand <david.marchand@6wind.com> Reviewed-by: Jay Rolette <rolette@infiniteio.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2014-09-17 13:46:49 +00:00
" Port %d: Link Up - speed %u Mbps - %s",
e1000: indent logs sections Prepare for next commit, indent sections where log messages will be modified so that next patch is only about \n. Signed-off-by: David Marchand <david.marchand@6wind.com>
2014-09-17 13:46:48 +00:00
dev->data->port_id,
(unsigned)link.link_speed,
link.link_duplex == ETH_LINK_FULL_DUPLEX ?
"full-duplex" : "half-duplex");
pci: rework interrupt handling Signed-off-by: Intel <intel.com>
2013-06-03 00:00:00 +00:00
} else {
e1000: clean log messages - remove leading \n in some messages, - remove trailing \n in some messages, - split multi lines messages, - introduce PMD_INIT_FUNC_TRACE macro and use it instead of PMD_INIT_LOG(DEBUG, "some_func") Signed-off-by: David Marchand <david.marchand@6wind.com> Reviewed-by: Jay Rolette <rolette@infiniteio.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2014-09-17 13:46:49 +00:00
PMD_INIT_LOG(INFO, " Port %d: Link Down",
e1000: indent logs sections Prepare for next commit, indent sections where log messages will be modified so that next patch is only about \n. Signed-off-by: David Marchand <david.marchand@6wind.com>
2014-09-17 13:46:48 +00:00
dev->data->port_id);
pci: rework interrupt handling Signed-off-by: Intel <intel.com>
2013-06-03 00:00:00 +00:00
}
e1000: fix log level of debug messages Any debug messages about hardware should be under debug (or removed) and reduce customer visible log spam. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2015-07-09 23:01:07 +00:00
PMD_INIT_LOG(DEBUG, "PCI Address: %04d:%02d:%02d:%d",
net/e1000: localize mapping of ethdev to PCI device Create one macro for where PCI device information is extracted from ethernet device. Makes later changes easier to review, and test. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jan Blunck <jblunck@infradead.org>
2016-12-23 15:57:56 +00:00
pci_dev->addr.domain,
pci_dev->addr.bus,
pci_dev->addr.devid,
pci_dev->addr.function);
pci: rework interrupt handling Signed-off-by: Intel <intel.com>
2013-06-03 00:00:00 +00:00
tctl = E1000_READ_REG(hw, E1000_TCTL);
rctl = E1000_READ_REG(hw, E1000_RCTL);
if (link.link_status) {
/* enable Tx/Rx */
tctl |= E1000_TCTL_EN;
rctl |= E1000_RCTL_EN;
} else {
/* disable Tx/Rx */
tctl &= ~E1000_TCTL_EN;
rctl &= ~E1000_RCTL_EN;
}
E1000_WRITE_REG(hw, E1000_TCTL, tctl);
E1000_WRITE_REG(hw, E1000_RCTL, rctl);
E1000_WRITE_FLUSH(hw);
ethdev: add an argument to internal callback function add cb_arg parameter to the _rte_eth_dev_callback_process function. Adding a parameter to this function allows passing information to the application when an eth device event occurs such as a VF to PF message. This allows the application to decide if a particular function is permitted. Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Signed-off-by: Alex Zelezniak <alexz@att.com>
2016-10-10 14:34:14 +00:00
_rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
}
return 0;
}
/**
* Interrupt handler which shall be registered at first.
*
* @param handle
* Pointer to interrupt handle.
* @param param
* The address of parameter (struct rte_eth_dev *) regsitered before.
*
* @return
* void
*/
static void
eal: clean up interrupt handle The patch change the prototype of callback function (rte_intr_callback_fn) by removing the unnecessary parameter. Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
2017-04-06 12:42:22 +00:00
eth_igb_interrupt_handler(void *param)
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
{
struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
eth_igb_interrupt_get_status(dev);
eal: clean up interrupt handle The patch change the prototype of callback function (rte_intr_callback_fn) by removing the unnecessary parameter. Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
2017-04-06 12:42:22 +00:00
eth_igb_interrupt_action(dev, dev->intr_handle);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
}
net/igb: support VF mailbox interrupt for link up/down When using kernel PF and DPDK VF, when the PF driver finds the link state changes, up -> down or down -> up, the driver will send a message to VF by mailbox. This link state change may be triggered by PHY disconnection/reconnection, user config change like *ifconfig down/up* or interface parameter, like MTU change. This patch enables the support of the mailbox interrupt, so VF driver can receive the message for link up/down. After VF receives this message, VF port need to be reset to recover. This needs to be handled by the application so this patch allows the app to register a reset callback so it can reset the VF port. Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Jingjing Wu <jingjing.wu@intel.com>
2016-06-01 01:53:09 +00:00
static int
eth_igbvf_interrupt_get_status(struct rte_eth_dev *dev)
{
uint32_t eicr;
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct e1000_interrupt *intr =
E1000_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
igbvf_intr_disable(hw);
/* read-on-clear nic registers here */
eicr = E1000_READ_REG(hw, E1000_EICR);
intr->flags = 0;
if (eicr == E1000_VTIVAR_MISC_MAILBOX)
intr->flags |= E1000_FLAG_MAILBOX;
return 0;
}
void igbvf_mbx_process(struct rte_eth_dev *dev)
{
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct e1000_mbx_info *mbx = &hw->mbx;
u32 in_msg = 0;
if (mbx->ops.read(hw, &in_msg, 1, 0))
return;
/* PF reset VF event */
if (in_msg == E1000_PF_CONTROL_MSG)
ethdev: add an argument to internal callback function add cb_arg parameter to the _rte_eth_dev_callback_process function. Adding a parameter to this function allows passing information to the application when an eth device event occurs such as a VF to PF message. This allows the application to decide if a particular function is permitted. Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Signed-off-by: Alex Zelezniak <alexz@att.com>
2016-10-10 14:34:14 +00:00
_rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_RESET, NULL);
net/igb: support VF mailbox interrupt for link up/down When using kernel PF and DPDK VF, when the PF driver finds the link state changes, up -> down or down -> up, the driver will send a message to VF by mailbox. This link state change may be triggered by PHY disconnection/reconnection, user config change like *ifconfig down/up* or interface parameter, like MTU change. This patch enables the support of the mailbox interrupt, so VF driver can receive the message for link up/down. After VF receives this message, VF port need to be reset to recover. This needs to be handled by the application so this patch allows the app to register a reset callback so it can reset the VF port. Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Jingjing Wu <jingjing.wu@intel.com>
2016-06-01 01:53:09 +00:00
}
static int
net/e1000: localize mapping of ethdev to PCI device Create one macro for where PCI device information is extracted from ethernet device. Makes later changes easier to review, and test. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jan Blunck <jblunck@infradead.org>
2016-12-23 15:57:56 +00:00
eth_igbvf_interrupt_action(struct rte_eth_dev *dev, struct rte_intr_handle *intr_handle)
net/igb: support VF mailbox interrupt for link up/down When using kernel PF and DPDK VF, when the PF driver finds the link state changes, up -> down or down -> up, the driver will send a message to VF by mailbox. This link state change may be triggered by PHY disconnection/reconnection, user config change like *ifconfig down/up* or interface parameter, like MTU change. This patch enables the support of the mailbox interrupt, so VF driver can receive the message for link up/down. After VF receives this message, VF port need to be reset to recover. This needs to be handled by the application so this patch allows the app to register a reset callback so it can reset the VF port. Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Jingjing Wu <jingjing.wu@intel.com>
2016-06-01 01:53:09 +00:00
{
struct e1000_interrupt *intr =
E1000_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
if (intr->flags & E1000_FLAG_MAILBOX) {
igbvf_mbx_process(dev);
intr->flags &= ~E1000_FLAG_MAILBOX;
}
igbvf_intr_enable(dev);
net/e1000: localize mapping of ethdev to PCI device Create one macro for where PCI device information is extracted from ethernet device. Makes later changes easier to review, and test. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jan Blunck <jblunck@infradead.org>
2016-12-23 15:57:56 +00:00
rte_intr_enable(intr_handle);
net/igb: support VF mailbox interrupt for link up/down When using kernel PF and DPDK VF, when the PF driver finds the link state changes, up -> down or down -> up, the driver will send a message to VF by mailbox. This link state change may be triggered by PHY disconnection/reconnection, user config change like *ifconfig down/up* or interface parameter, like MTU change. This patch enables the support of the mailbox interrupt, so VF driver can receive the message for link up/down. After VF receives this message, VF port need to be reset to recover. This needs to be handled by the application so this patch allows the app to register a reset callback so it can reset the VF port. Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Jingjing Wu <jingjing.wu@intel.com>
2016-06-01 01:53:09 +00:00
return 0;
}
static void
eal: clean up interrupt handle The patch change the prototype of callback function (rte_intr_callback_fn) by removing the unnecessary parameter. Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
2017-04-06 12:42:22 +00:00
eth_igbvf_interrupt_handler(void *param)
net/igb: support VF mailbox interrupt for link up/down When using kernel PF and DPDK VF, when the PF driver finds the link state changes, up -> down or down -> up, the driver will send a message to VF by mailbox. This link state change may be triggered by PHY disconnection/reconnection, user config change like *ifconfig down/up* or interface parameter, like MTU change. This patch enables the support of the mailbox interrupt, so VF driver can receive the message for link up/down. After VF receives this message, VF port need to be reset to recover. This needs to be handled by the application so this patch allows the app to register a reset callback so it can reset the VF port. Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Jingjing Wu <jingjing.wu@intel.com>
2016-06-01 01:53:09 +00:00
{
struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
eth_igbvf_interrupt_get_status(dev);
eal: clean up interrupt handle The patch change the prototype of callback function (rte_intr_callback_fn) by removing the unnecessary parameter. Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
2017-04-06 12:42:22 +00:00
eth_igbvf_interrupt_action(dev, dev->intr_handle);
net/igb: support VF mailbox interrupt for link up/down When using kernel PF and DPDK VF, when the PF driver finds the link state changes, up -> down or down -> up, the driver will send a message to VF by mailbox. This link state change may be triggered by PHY disconnection/reconnection, user config change like *ifconfig down/up* or interface parameter, like MTU change. This patch enables the support of the mailbox interrupt, so VF driver can receive the message for link up/down. After VF receives this message, VF port need to be reset to recover. This needs to be handled by the application so this patch allows the app to register a reset callback so it can reset the VF port. Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Jingjing Wu <jingjing.wu@intel.com>
2016-06-01 01:53:09 +00:00
}
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
static int
eth_igb_led_on(struct rte_eth_dev *dev)
{
struct e1000_hw *hw;
hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
remove extra parentheses in return statement fix the error reported by checkpatch: "ERROR: return is not a function, parentheses are not required" remove parentheses in return like: "return (logical expressions)" remove parentheses in return a function like: "return (rte_mempool_lookup(...))" Fixes: 6307b909b8e0 ("lib: remove extra parenthesis after return") Signed-off-by: Huawei Xie <huawei.xie@intel.com>
2016-01-27 13:58:30 +00:00
return e1000_led_on(hw) == E1000_SUCCESS ? 0 : -ENOTSUP;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
}
static int
eth_igb_led_off(struct rte_eth_dev *dev)
{
struct e1000_hw *hw;
hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
remove extra parentheses in return statement fix the error reported by checkpatch: "ERROR: return is not a function, parentheses are not required" remove parentheses in return like: "return (logical expressions)" remove parentheses in return a function like: "return (rte_mempool_lookup(...))" Fixes: 6307b909b8e0 ("lib: remove extra parenthesis after return") Signed-off-by: Huawei Xie <huawei.xie@intel.com>
2016-01-27 13:58:30 +00:00
return e1000_led_off(hw) == E1000_SUCCESS ? 0 : -ENOTSUP;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
}
ethdev: retrieve flow control configuration This patch adds a new function in ethdev api to retrieve current flow control configuration. This operation has been implemented for rte_em_pmd, rte_igb_pmd and rte_ixgbe_pmd. Signed-off-by: Zijie Pan <zijie.pan@6wind.com> Signed-off-by: David Marchand <david.marchand@6wind.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-06-17 18:09:26 +00:00
static int
eth_igb_flow_ctrl_get(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
{
struct e1000_hw *hw;
uint32_t ctrl;
int tx_pause;
int rx_pause;
hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
fc_conf->pause_time = hw->fc.pause_time;
fc_conf->high_water = hw->fc.high_water;
fc_conf->low_water = hw->fc.low_water;
fc_conf->send_xon = hw->fc.send_xon;
ethdev: autoneg parameter in flow control accessors Add autoneg field in flow control parameters. This makes it easier to understand why changing some parameters does not always have the expected result. Changing autoneg is not supported at the moment. Signed-off-by: David Marchand <david.marchand@6wind.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-06-17 18:09:27 +00:00
fc_conf->autoneg = hw->mac.autoneg;
ethdev: retrieve flow control configuration This patch adds a new function in ethdev api to retrieve current flow control configuration. This operation has been implemented for rte_em_pmd, rte_igb_pmd and rte_ixgbe_pmd. Signed-off-by: Zijie Pan <zijie.pan@6wind.com> Signed-off-by: David Marchand <david.marchand@6wind.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-06-17 18:09:26 +00:00
/*
* Return rx_pause and tx_pause status according to actual setting of
* the TFCE and RFCE bits in the CTRL register.
*/
ctrl = E1000_READ_REG(hw, E1000_CTRL);
if (ctrl & E1000_CTRL_TFCE)
tx_pause = 1;
else
tx_pause = 0;
if (ctrl & E1000_CTRL_RFCE)
rx_pause = 1;
else
rx_pause = 0;
if (rx_pause && tx_pause)
fc_conf->mode = RTE_FC_FULL;
else if (rx_pause)
fc_conf->mode = RTE_FC_RX_PAUSE;
else if (tx_pause)
fc_conf->mode = RTE_FC_TX_PAUSE;
else
fc_conf->mode = RTE_FC_NONE;
return 0;
}
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
static int
eth_igb_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
{
struct e1000_hw *hw;
int err;
enum e1000_fc_mode rte_fcmode_2_e1000_fcmode[] = {
e1000_fc_none,
e1000_fc_rx_pause,
e1000_fc_tx_pause,
e1000_fc_full
};
uint32_t rx_buf_size;
uint32_t max_high_water;
e1000: add MAC control forward Signed-off-by: Intel
2013-11-08 02:00:00 +00:00
uint32_t rctl;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
ethdev: autoneg parameter in flow control accessors Add autoneg field in flow control parameters. This makes it easier to understand why changing some parameters does not always have the expected result. Changing autoneg is not supported at the moment. Signed-off-by: David Marchand <david.marchand@6wind.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-06-17 18:09:27 +00:00
if (fc_conf->autoneg != hw->mac.autoneg)
return -ENOTSUP;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
rx_buf_size = igb_get_rx_buffer_size(hw);
e1000: clean log messages - remove leading \n in some messages, - remove trailing \n in some messages, - split multi lines messages, - introduce PMD_INIT_FUNC_TRACE macro and use it instead of PMD_INIT_LOG(DEBUG, "some_func") Signed-off-by: David Marchand <david.marchand@6wind.com> Reviewed-by: Jay Rolette <rolette@infiniteio.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2014-09-17 13:46:49 +00:00
PMD_INIT_LOG(DEBUG, "Rx packet buffer size = 0x%x", rx_buf_size);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
/* At least reserve one Ethernet frame for watermark */
max_high_water = rx_buf_size - ETHER_MAX_LEN;
if ((fc_conf->high_water > max_high_water) ||
e1000: indent logs sections Prepare for next commit, indent sections where log messages will be modified so that next patch is only about \n. Signed-off-by: David Marchand <david.marchand@6wind.com>
2014-09-17 13:46:48 +00:00
(fc_conf->high_water < fc_conf->low_water)) {
e1000: clean log messages - remove leading \n in some messages, - remove trailing \n in some messages, - split multi lines messages, - introduce PMD_INIT_FUNC_TRACE macro and use it instead of PMD_INIT_LOG(DEBUG, "some_func") Signed-off-by: David Marchand <david.marchand@6wind.com> Reviewed-by: Jay Rolette <rolette@infiniteio.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2014-09-17 13:46:49 +00:00
PMD_INIT_LOG(ERR, "e1000 incorrect high/low water value");
PMD_INIT_LOG(ERR, "high water must <= 0x%x", max_high_water);
remove extra parentheses in return statement fix the error reported by checkpatch: "ERROR: return is not a function, parentheses are not required" remove parentheses in return like: "return (logical expressions)" remove parentheses in return a function like: "return (rte_mempool_lookup(...))" Fixes: 6307b909b8e0 ("lib: remove extra parenthesis after return") Signed-off-by: Huawei Xie <huawei.xie@intel.com>
2016-01-27 13:58:30 +00:00
return -EINVAL;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
}
hw->fc.requested_mode = rte_fcmode_2_e1000_fcmode[fc_conf->mode];
hw->fc.pause_time = fc_conf->pause_time;
hw->fc.high_water = fc_conf->high_water;
hw->fc.low_water = fc_conf->low_water;
hw->fc.send_xon = fc_conf->send_xon;
err = e1000_setup_link_generic(hw);
if (err == E1000_SUCCESS) {
e1000: add MAC control forward Signed-off-by: Intel
2013-11-08 02:00:00 +00:00
/* check if we want to forward MAC frames - driver doesn't have native
* capability to do that, so we'll write the registers ourselves */
rctl = E1000_READ_REG(hw, E1000_RCTL);
/* set or clear MFLCN.PMCF bit depending on configuration */
if (fc_conf->mac_ctrl_frame_fwd != 0)
rctl |= E1000_RCTL_PMCF;
else
rctl &= ~E1000_RCTL_PMCF;
E1000_WRITE_REG(hw, E1000_RCTL, rctl);
E1000_WRITE_FLUSH(hw);
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
return 0;
}
e1000: clean log messages - remove leading \n in some messages, - remove trailing \n in some messages, - split multi lines messages, - introduce PMD_INIT_FUNC_TRACE macro and use it instead of PMD_INIT_LOG(DEBUG, "some_func") Signed-off-by: David Marchand <david.marchand@6wind.com> Reviewed-by: Jay Rolette <rolette@infiniteio.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2014-09-17 13:46:49 +00:00
PMD_INIT_LOG(ERR, "e1000_setup_link_generic = 0x%x", err);
remove extra parentheses in return statement fix the error reported by checkpatch: "ERROR: return is not a function, parentheses are not required" remove parentheses in return like: "return (logical expressions)" remove parentheses in return a function like: "return (rte_mempool_lookup(...))" Fixes: 6307b909b8e0 ("lib: remove extra parenthesis after return") Signed-off-by: Huawei Xie <huawei.xie@intel.com>
2016-01-27 13:58:30 +00:00
return -EIO;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
}
igb: add PF support Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
#define E1000_RAH_POOLSEL_SHIFT (18)
ethdev: fix adding invalid MAC address Some customers find adding MAC addr to VF sometimes can fail, but it is still stored in dev->data->mac_addrs[ ]. So this can lead to some errors that assumes the non-zero entry in dev->data->mac_addrs[ ] is valid. Following acknowledgements are from specific NIC PMD maintainer for their managing part. This patch changes the ethdev internal API, it should not be backported to a stable/LTS release so far. Fixes: af75078fece3 ("first public release") Signed-off-by: Wei Dai <wei.dai@intel.com> Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2017-05-05 00:40:00 +00:00
static int
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
eth_igb_rar_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr,
uint32_t index, __rte_unused uint32_t pool)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
igb: add PF support Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
uint32_t rah;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
e1000_rar_set(hw, mac_addr->addr_bytes, index);
igb: add PF support Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
rah = E1000_READ_REG(hw, E1000_RAH(index));
rah |= (0x1 << (E1000_RAH_POOLSEL_SHIFT + pool));
E1000_WRITE_REG(hw, E1000_RAH(index), rah);
ethdev: fix adding invalid MAC address Some customers find adding MAC addr to VF sometimes can fail, but it is still stored in dev->data->mac_addrs[ ]. So this can lead to some errors that assumes the non-zero entry in dev->data->mac_addrs[ ] is valid. Following acknowledgements are from specific NIC PMD maintainer for their managing part. This patch changes the ethdev internal API, it should not be backported to a stable/LTS release so far. Fixes: af75078fece3 ("first public release") Signed-off-by: Wei Dai <wei.dai@intel.com> Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2017-05-05 00:40:00 +00:00
return 0;
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
}
static void
eth_igb_rar_clear(struct rte_eth_dev *dev, uint32_t index)
{
uint8_t addr[ETHER_ADDR_LEN];
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
memset(addr, 0, sizeof(addr));
e1000_rar_set(hw, addr, index);
}
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
igb: add default mac address modifier - set_mac_addr Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com> Acked-by: Andrew Harvey <agh@cisco.com> Acked-by: David Harton <dharton@cisco.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-07-16 13:25:36 +00:00
static void
eth_igb_default_mac_addr_set(struct rte_eth_dev *dev,
struct ether_addr *addr)
{
eth_igb_rar_clear(dev, 0);
eth_igb_rar_set(dev, (void *)addr, 0, 0);
}
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
/*
* Virtual Function operations
*/
static void
igbvf_intr_disable(struct e1000_hw *hw)
{
e1000: clean log messages - remove leading \n in some messages, - remove trailing \n in some messages, - split multi lines messages, - introduce PMD_INIT_FUNC_TRACE macro and use it instead of PMD_INIT_LOG(DEBUG, "some_func") Signed-off-by: David Marchand <david.marchand@6wind.com> Reviewed-by: Jay Rolette <rolette@infiniteio.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2014-09-17 13:46:49 +00:00
PMD_INIT_FUNC_TRACE();
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
/* Clear interrupt mask to stop from interrupts being generated */
pci: rework interrupt handling Signed-off-by: Intel <intel.com>
2013-06-03 00:00:00 +00:00
E1000_WRITE_REG(hw, E1000_EIMC, 0xFFFF);
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
E1000_WRITE_FLUSH(hw);
}
static void
igbvf_stop_adapter(struct rte_eth_dev *dev)
{
u32 reg_val;
u16 i;
struct rte_eth_dev_info dev_info;
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
memset(&dev_info, 0, sizeof(dev_info));
igb: add redirection table size in device info As more and more information are different between PF and VF, ops of 'dev_infos_get' has been implemented respectively. In addition, new field of 'reta_size' has been added in 'struct rte_eth_dev_info' for returning redirection table size. Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-11-15 16:03:40 +00:00
eth_igbvf_infos_get(dev, &dev_info);
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
/* Clear interrupt mask to stop from interrupts being generated */
pci: rework interrupt handling Signed-off-by: Intel <intel.com>
2013-06-03 00:00:00 +00:00
igbvf_intr_disable(hw);
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
/* Clear any pending interrupts, flush previous writes */
E1000_READ_REG(hw, E1000_EICR);
/* Disable the transmit unit. Each queue must be disabled. */
for (i = 0; i < dev_info.max_tx_queues; i++)
E1000_WRITE_REG(hw, E1000_TXDCTL(i), E1000_TXDCTL_SWFLSH);
/* Disable the receive unit by stopping each queue */
for (i = 0; i < dev_info.max_rx_queues; i++) {
reg_val = E1000_READ_REG(hw, E1000_RXDCTL(i));
reg_val &= ~E1000_RXDCTL_QUEUE_ENABLE;
E1000_WRITE_REG(hw, E1000_RXDCTL(i), reg_val);
while (E1000_READ_REG(hw, E1000_RXDCTL(i)) & E1000_RXDCTL_QUEUE_ENABLE)
;
}
/* flush all queues disables */
E1000_WRITE_FLUSH(hw);
msec_delay(2);
}
static int eth_igbvf_link_update(struct e1000_hw *hw)
{
struct e1000_mbx_info *mbx = &hw->mbx;
struct e1000_mac_info *mac = &hw->mac;
int ret_val = E1000_SUCCESS;
PMD_INIT_LOG(DEBUG, "e1000_check_for_link_vf");
/*
* We only want to run this if there has been a rst asserted.
* in this case that could mean a link change, device reset,
* or a virtual function reset
*/
/* If we were hit with a reset or timeout drop the link */
if (!e1000_check_for_rst(hw, 0) || !mbx->timeout)
mac->get_link_status = TRUE;
if (!mac->get_link_status)
goto out;
/* if link status is down no point in checking to see if pf is up */
if (!(E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_LU))
goto out;
/* if we passed all the tests above then the link is up and we no
* longer need to check for link */
mac->get_link_status = FALSE;
out:
return ret_val;
}
static int
igbvf_dev_configure(struct rte_eth_dev *dev)
{
struct rte_eth_conf* conf = &dev->data->dev_conf;
e1000: clean log messages - remove leading \n in some messages, - remove trailing \n in some messages, - split multi lines messages, - introduce PMD_INIT_FUNC_TRACE macro and use it instead of PMD_INIT_LOG(DEBUG, "some_func") Signed-off-by: David Marchand <david.marchand@6wind.com> Reviewed-by: Jay Rolette <rolette@infiniteio.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2014-09-17 13:46:49 +00:00
PMD_INIT_LOG(DEBUG, "Configured Virtual Function port id: %d",
e1000: indent logs sections Prepare for next commit, indent sections where log messages will be modified so that next patch is only about \n. Signed-off-by: David Marchand <david.marchand@6wind.com>
2014-09-17 13:46:48 +00:00
dev->data->port_id);
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
/*
* VF has no ability to enable/disable HW CRC
* Keep the persistent behavior the same as Host PF
*/
#ifndef RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC
if (!conf->rxmode.hw_strip_crc) {
e1000: raise log level of significant events Any message about incorrect API usage should be at NOTICE level or above. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2015-07-09 23:01:08 +00:00
PMD_INIT_LOG(NOTICE, "VF can't disable HW CRC Strip");
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
conf->rxmode.hw_strip_crc = 1;
}
#else
if (conf->rxmode.hw_strip_crc) {
e1000: raise log level of significant events Any message about incorrect API usage should be at NOTICE level or above. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2015-07-09 23:01:08 +00:00
PMD_INIT_LOG(NOTICE, "VF can't enable HW CRC Strip");
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
conf->rxmode.hw_strip_crc = 0;
}
#endif
return 0;
}
static int
igbvf_dev_start(struct rte_eth_dev *dev)
{
remove trailing whitespaces This commit removes trailing whitespace from lines in files. Almost all files are affected, as the BSD license copyright header had trailing whitespace on 4 lines in it [hence the number of files reporting 8 lines changed in the diffstat]. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> [Thomas: remove spaces before tabs in libs] [Thomas: remove more trailing spaces in non-C files] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-03 23:42:50 +00:00
struct e1000_hw *hw =
pci: rework interrupt handling Signed-off-by: Intel <intel.com>
2013-06-03 00:00:00 +00:00
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
e1000: support port hotplug This patch depends on the Port Hotplug Framework. It implements the eth_dev_uninit functions for rte_em_pmd, rte_igb_pmd and rte_igbvf_pmd. Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-07-03 14:38:26 +00:00
struct e1000_adapter *adapter =
E1000_DEV_PRIVATE(dev->data->dev_private);
net/e1000: localize mapping of ethdev to PCI device Create one macro for where PCI device information is extracted from ethernet device. Makes later changes easier to review, and test. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jan Blunck <jblunck@infradead.org>
2016-12-23 15:57:56 +00:00
struct rte_pci_device *pci_dev = E1000_DEV_TO_PCI(dev);
struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
int ret;
net/igb: support VF mailbox interrupt for link up/down When using kernel PF and DPDK VF, when the PF driver finds the link state changes, up -> down or down -> up, the driver will send a message to VF by mailbox. This link state change may be triggered by PHY disconnection/reconnection, user config change like *ifconfig down/up* or interface parameter, like MTU change. This patch enables the support of the mailbox interrupt, so VF driver can receive the message for link up/down. After VF receives this message, VF port need to be reset to recover. This needs to be handled by the application so this patch allows the app to register a reset callback so it can reset the VF port. Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Jingjing Wu <jingjing.wu@intel.com>
2016-06-01 01:53:09 +00:00
uint32_t intr_vector = 0;
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
e1000: clean log messages - remove leading \n in some messages, - remove trailing \n in some messages, - split multi lines messages, - introduce PMD_INIT_FUNC_TRACE macro and use it instead of PMD_INIT_LOG(DEBUG, "some_func") Signed-off-by: David Marchand <david.marchand@6wind.com> Reviewed-by: Jay Rolette <rolette@infiniteio.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2014-09-17 13:46:49 +00:00
PMD_INIT_FUNC_TRACE();
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
pci: rework interrupt handling Signed-off-by: Intel <intel.com>
2013-06-03 00:00:00 +00:00
hw->mac.ops.reset_hw(hw);
e1000: support port hotplug This patch depends on the Port Hotplug Framework. It implements the eth_dev_uninit functions for rte_em_pmd, rte_igb_pmd and rte_igbvf_pmd. Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-07-03 14:38:26 +00:00
adapter->stopped = 0;
pci: rework interrupt handling Signed-off-by: Intel <intel.com>
2013-06-03 00:00:00 +00:00
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
/* Set all vfta */
igbvf_set_vfta_all(dev,1);
remove trailing whitespaces This commit removes trailing whitespace from lines in files. Almost all files are affected, as the BSD license copyright header had trailing whitespace on 4 lines in it [hence the number of files reporting 8 lines changed in the diffstat]. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> [Thomas: remove spaces before tabs in libs] [Thomas: remove more trailing spaces in non-C files] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-03 23:42:50 +00:00
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
eth_igbvf_tx_init(dev);
/* This can fail when allocating mbufs for descriptor rings */
ret = eth_igbvf_rx_init(dev);
if (ret) {
PMD_INIT_LOG(ERR, "Unable to initialize RX hardware");
igb_dev_clear_queues(dev);
return ret;
}
net/igb: support VF mailbox interrupt for link up/down When using kernel PF and DPDK VF, when the PF driver finds the link state changes, up -> down or down -> up, the driver will send a message to VF by mailbox. This link state change may be triggered by PHY disconnection/reconnection, user config change like *ifconfig down/up* or interface parameter, like MTU change. This patch enables the support of the mailbox interrupt, so VF driver can receive the message for link up/down. After VF receives this message, VF port need to be reset to recover. This needs to be handled by the application so this patch allows the app to register a reset callback so it can reset the VF port. Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Jingjing Wu <jingjing.wu@intel.com>
2016-06-01 01:53:09 +00:00
/* check and configure queue intr-vector mapping */
if (dev->data->dev_conf.intr_conf.rxq != 0) {
intr_vector = dev->data->nb_rx_queues;
ret = rte_intr_efd_enable(intr_handle, intr_vector);
if (ret)
return ret;
}
if (rte_intr_dp_is_en(intr_handle) && !intr_handle->intr_vec) {
intr_handle->intr_vec =
rte_zmalloc("intr_vec",
dev->data->nb_rx_queues * sizeof(int), 0);
if (!intr_handle->intr_vec) {
PMD_INIT_LOG(ERR, "Failed to allocate %d rx_queues"
drivers/net: remove redundant new line from logs Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org>
2017-01-27 15:16:32 +00:00
" intr_vec", dev->data->nb_rx_queues);
net/igb: support VF mailbox interrupt for link up/down When using kernel PF and DPDK VF, when the PF driver finds the link state changes, up -> down or down -> up, the driver will send a message to VF by mailbox. This link state change may be triggered by PHY disconnection/reconnection, user config change like *ifconfig down/up* or interface parameter, like MTU change. This patch enables the support of the mailbox interrupt, so VF driver can receive the message for link up/down. After VF receives this message, VF port need to be reset to recover. This needs to be handled by the application so this patch allows the app to register a reset callback so it can reset the VF port. Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Jingjing Wu <jingjing.wu@intel.com>
2016-06-01 01:53:09 +00:00
return -ENOMEM;
}
}
eth_igbvf_configure_msix_intr(dev);
/* enable uio/vfio intr/eventfd mapping */
rte_intr_enable(intr_handle);
/* resume enabled intr since hw reset */
igbvf_intr_enable(dev);
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
return 0;
}
static void
igbvf_dev_stop(struct rte_eth_dev *dev)
{
net/e1000: localize mapping of ethdev to PCI device Create one macro for where PCI device information is extracted from ethernet device. Makes later changes easier to review, and test. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jan Blunck <jblunck@infradead.org>
2016-12-23 15:57:56 +00:00
struct rte_pci_device *pci_dev = E1000_DEV_TO_PCI(dev);
struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
net/igb: support VF mailbox interrupt for link up/down When using kernel PF and DPDK VF, when the PF driver finds the link state changes, up -> down or down -> up, the driver will send a message to VF by mailbox. This link state change may be triggered by PHY disconnection/reconnection, user config change like *ifconfig down/up* or interface parameter, like MTU change. This patch enables the support of the mailbox interrupt, so VF driver can receive the message for link up/down. After VF receives this message, VF port need to be reset to recover. This needs to be handled by the application so this patch allows the app to register a reset callback so it can reset the VF port. Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Jingjing Wu <jingjing.wu@intel.com>
2016-06-01 01:53:09 +00:00
e1000: clean log messages - remove leading \n in some messages, - remove trailing \n in some messages, - split multi lines messages, - introduce PMD_INIT_FUNC_TRACE macro and use it instead of PMD_INIT_LOG(DEBUG, "some_func") Signed-off-by: David Marchand <david.marchand@6wind.com> Reviewed-by: Jay Rolette <rolette@infiniteio.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2014-09-17 13:46:49 +00:00
PMD_INIT_FUNC_TRACE();
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
igbvf_stop_adapter(dev);
remove trailing whitespaces This commit removes trailing whitespace from lines in files. Almost all files are affected, as the BSD license copyright header had trailing whitespace on 4 lines in it [hence the number of files reporting 8 lines changed in the diffstat]. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> [Thomas: remove spaces before tabs in libs] [Thomas: remove more trailing spaces in non-C files] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-03 23:42:50 +00:00
/*
* Clear what we set, but we still keep shadow_vfta to
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
* restore after device starts
*/
igbvf_set_vfta_all(dev,0);
igb_dev_clear_queues(dev);
net/igb: support VF mailbox interrupt for link up/down When using kernel PF and DPDK VF, when the PF driver finds the link state changes, up -> down or down -> up, the driver will send a message to VF by mailbox. This link state change may be triggered by PHY disconnection/reconnection, user config change like *ifconfig down/up* or interface parameter, like MTU change. This patch enables the support of the mailbox interrupt, so VF driver can receive the message for link up/down. After VF receives this message, VF port need to be reset to recover. This needs to be handled by the application so this patch allows the app to register a reset callback so it can reset the VF port. Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Jingjing Wu <jingjing.wu@intel.com>
2016-06-01 01:53:09 +00:00
/* disable intr eventfd mapping */
rte_intr_disable(intr_handle);
/* Clean datapath event and queue/vec mapping */
rte_intr_efd_disable(intr_handle);
if (intr_handle->intr_vec) {
rte_free(intr_handle->intr_vec);
intr_handle->intr_vec = NULL;
}
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
}
static void
igbvf_dev_close(struct rte_eth_dev *dev)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
e1000: support port hotplug This patch depends on the Port Hotplug Framework. It implements the eth_dev_uninit functions for rte_em_pmd, rte_igb_pmd and rte_igbvf_pmd. Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-07-03 14:38:26 +00:00
struct e1000_adapter *adapter =
E1000_DEV_PRIVATE(dev->data->dev_private);
e1000: fix VF MAC address on close Allow reprogramming of the RAR with a zero mac address, to ensure that the VF traffic goes to the PF after stop, close and detach of the VF. Fixes: be2d648a2dd3 ("igb: add PF support") Fixes: d82170d27918 ("igb: add VF support") Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2016-03-02 16:09:06 +00:00
struct ether_addr addr;
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
e1000: clean log messages - remove leading \n in some messages, - remove trailing \n in some messages, - split multi lines messages, - introduce PMD_INIT_FUNC_TRACE macro and use it instead of PMD_INIT_LOG(DEBUG, "some_func") Signed-off-by: David Marchand <david.marchand@6wind.com> Reviewed-by: Jay Rolette <rolette@infiniteio.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2014-09-17 13:46:49 +00:00
PMD_INIT_FUNC_TRACE();
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
e1000_reset_hw(hw);
igbvf_dev_stop(dev);
e1000: support port hotplug This patch depends on the Port Hotplug Framework. It implements the eth_dev_uninit functions for rte_em_pmd, rte_igb_pmd and rte_igbvf_pmd. Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-07-03 14:38:26 +00:00
adapter->stopped = 1;
e1000: free queue memory when closing Queues were freed in clear function called in stop function. Split clearing and freeing in separate functions to move queue freeing from stop to close function. Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-07-03 14:38:27 +00:00
igb_dev_free_queues(dev);
e1000: fix VF MAC address on close Allow reprogramming of the RAR with a zero mac address, to ensure that the VF traffic goes to the PF after stop, close and detach of the VF. Fixes: be2d648a2dd3 ("igb: add PF support") Fixes: d82170d27918 ("igb: add VF support") Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2016-03-02 16:09:06 +00:00
/**
* reprogram the RAR with a zero mac address,
* to ensure that the VF traffic goes to the PF
* after stop, close and detach of the VF.
**/
memset(&addr, 0, sizeof(addr));
igbvf_default_mac_addr_set(dev, &addr);
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
}
e1000: support VF promiscuous and allmulticast Enable promiscuous and allmulticast mode control from the VF using rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() and rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable(). For promiscuous mode host/PF igb driver should be built with IGB_ENABLE_VF_PROMISC. For allmulticast mode "allmulti" flag should be set for appropriate PF ifconfig eth0 allmulti Signed-off-by: Yury Kylulin <yury.kylulin@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2016-02-09 09:09:43 +00:00
static void
igbvf_promiscuous_enable(struct rte_eth_dev *dev)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
/* Set both unicast and multicast promisc */
e1000_promisc_set_vf(hw, e1000_promisc_enabled);
}
static void
igbvf_promiscuous_disable(struct rte_eth_dev *dev)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
/* If in allmulticast mode leave multicast promisc */
if (dev->data->all_multicast == 1)
e1000_promisc_set_vf(hw, e1000_promisc_multicast);
else
e1000_promisc_set_vf(hw, e1000_promisc_disabled);
}
static void
igbvf_allmulticast_enable(struct rte_eth_dev *dev)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
/* In promiscuous mode multicast promisc already set */
if (dev->data->promiscuous == 0)
e1000_promisc_set_vf(hw, e1000_promisc_multicast);
}
static void
igbvf_allmulticast_disable(struct rte_eth_dev *dev)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
/* In promiscuous mode leave multicast promisc enabled */
if (dev->data->promiscuous == 0)
e1000_promisc_set_vf(hw, e1000_promisc_disabled);
}
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
static int igbvf_set_vfta(struct e1000_hw *hw, uint16_t vid, bool on)
{
struct e1000_mbx_info *mbx = &hw->mbx;
uint32_t msgbuf[2];
igbvf: fix vlan filtering Once posted through mailbox, we must check for nack from the PF and report an error in this case. Signed-off-by: Julien Meunier <julien.meunier@6wind.com> Signed-off-by: David Marchand <david.marchand@6wind.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2015-11-03 14:25:22 +00:00
s32 err;
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
remove trailing whitespaces This commit removes trailing whitespace from lines in files. Almost all files are affected, as the BSD license copyright header had trailing whitespace on 4 lines in it [hence the number of files reporting 8 lines changed in the diffstat]. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> [Thomas: remove spaces before tabs in libs] [Thomas: remove more trailing spaces in non-C files] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-03 23:42:50 +00:00
/* After set vlan, vlan strip will also be enabled in igb driver*/
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
msgbuf[0] = E1000_VF_SET_VLAN;
msgbuf[1] = vid;
/* Setting the 8 bit field MSG INFO to TRUE indicates "add" */
if (on)
msgbuf[0] |= E1000_VF_SET_VLAN_ADD;
igbvf: fix vlan filtering Once posted through mailbox, we must check for nack from the PF and report an error in this case. Signed-off-by: Julien Meunier <julien.meunier@6wind.com> Signed-off-by: David Marchand <david.marchand@6wind.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2015-11-03 14:25:22 +00:00
err = mbx->ops.write_posted(hw, msgbuf, 2, 0);
if (err)
goto mbx_err;
err = mbx->ops.read_posted(hw, msgbuf, 2, 0);
if (err)
goto mbx_err;
msgbuf[0] &= ~E1000_VT_MSGTYPE_CTS;
if (msgbuf[0] == (E1000_VF_SET_VLAN | E1000_VT_MSGTYPE_NACK))
err = -EINVAL;
mbx_err:
return err;
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
}
static void igbvf_set_vfta_all(struct rte_eth_dev *dev, bool on)
{
remove trailing whitespaces This commit removes trailing whitespace from lines in files. Almost all files are affected, as the BSD license copyright header had trailing whitespace on 4 lines in it [hence the number of files reporting 8 lines changed in the diffstat]. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> [Thomas: remove spaces before tabs in libs] [Thomas: remove more trailing spaces in non-C files] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-03 23:42:50 +00:00
struct e1000_hw *hw =
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct e1000_vfta * shadow_vfta =
E1000_DEV_PRIVATE_TO_VFTA(dev->data->dev_private);
int i = 0, j = 0, vfta = 0, mask = 1;
for (i = 0; i < IGB_VFTA_SIZE; i++){
vfta = shadow_vfta->vfta[i];
if(vfta){
mask = 1;
for (j = 0; j < 32; j++){
if(vfta & mask)
lib: fix various compilation warnings Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
igbvf_set_vfta(hw,
(uint16_t)((i<<5)+j), on);
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
mask<<=1;
}
}
}
}
static int
igbvf_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
{
remove trailing whitespaces This commit removes trailing whitespace from lines in files. Almost all files are affected, as the BSD license copyright header had trailing whitespace on 4 lines in it [hence the number of files reporting 8 lines changed in the diffstat]. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> [Thomas: remove spaces before tabs in libs] [Thomas: remove more trailing spaces in non-C files] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-03 23:42:50 +00:00
struct e1000_hw *hw =
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct e1000_vfta * shadow_vfta =
E1000_DEV_PRIVATE_TO_VFTA(dev->data->dev_private);
uint32_t vid_idx = 0;
uint32_t vid_bit = 0;
int ret = 0;
remove trailing whitespaces This commit removes trailing whitespace from lines in files. Almost all files are affected, as the BSD license copyright header had trailing whitespace on 4 lines in it [hence the number of files reporting 8 lines changed in the diffstat]. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> [Thomas: remove spaces before tabs in libs] [Thomas: remove more trailing spaces in non-C files] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-03 23:42:50 +00:00
e1000: clean log messages - remove leading \n in some messages, - remove trailing \n in some messages, - split multi lines messages, - introduce PMD_INIT_FUNC_TRACE macro and use it instead of PMD_INIT_LOG(DEBUG, "some_func") Signed-off-by: David Marchand <david.marchand@6wind.com> Reviewed-by: Jay Rolette <rolette@infiniteio.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2014-09-17 13:46:49 +00:00
PMD_INIT_FUNC_TRACE();
igb: add VF support Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
/*vind is not used in VF driver, set to 0, check ixgbe_set_vfta_vf*/
ret = igbvf_set_vfta(hw, vlan_id, !!on);
if(ret){
PMD_INIT_LOG(ERR, "Unable to set VF vlan");
return ret;
}
vid_idx = (uint32_t) ((vlan_id >> 5) & 0x7F);
vid_bit = (uint32_t) (1 << (vlan_id & 0x1F));
/*Save what we set and retore it after device reset*/
if (on)
shadow_vfta->vfta[vid_idx] |= vid_bit;
else
shadow_vfta->vfta[vid_idx] &= ~vid_bit;
return 0;
}
igb: add default mac address modifier - set_mac_addr Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com> Acked-by: Andrew Harvey <agh@cisco.com> Acked-by: David Harton <dharton@cisco.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-07-16 13:25:36 +00:00
static void
igbvf_default_mac_addr_set(struct rte_eth_dev *dev, struct ether_addr *addr)
{
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
/* index is not used by rar_set() */
hw->mac.ops.rar_set(hw, (void *)addr, 0);
}
igb: RSS RETA configuration Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
static int
eth_igb_rss_reta_update(struct rte_eth_dev *dev,
ethdev: support multiple sizes of redirection table As 40G NIC supports different sizes (128/512/64 entries) of redirection table from that (128 entries) of 1G and 10G NICs, support of multiple sizes of redirection table is needed. It includes, * Redefine 'struct rte_eth_rss_reta' in ethdev. - To 'struct rte_eth_rss_reta_entry64' which contains 64 entries and 64 bits mask. - Array of above new structure can be used for any number of redirection table entries, as long as the number is multiple of 64. This is quite flexible for the future expanding of redirection table. * Redefinition of relevant interfaces in ethdev. - Interface of reta update has been redefined with new parameters. - Interface of reta query has been redefined with new parameters. * Rework of 1G PMD in igb. - reta update has been reworked. - reta query has been reworked. * Rework of 10G PMD in ixgbe. - reta update has been reworked. - reta query has been reworked. * Rework of 40G PMD (PF only) in i40e. - reta update has been reworked. - reta query has been reworked. * Implement relevant commands in testpmd. Test report: http://dpdk.org/ml/archives/dev/2014-November/008362.html Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Tested-by: Erlu Chen <erlu.chen@intel.com>
2014-11-15 16:03:43 +00:00
struct rte_eth_rss_reta_entry64 *reta_conf,
uint16_t reta_size)
igb: RSS RETA configuration Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
{
ethdev: support multiple sizes of redirection table As 40G NIC supports different sizes (128/512/64 entries) of redirection table from that (128 entries) of 1G and 10G NICs, support of multiple sizes of redirection table is needed. It includes, * Redefine 'struct rte_eth_rss_reta' in ethdev. - To 'struct rte_eth_rss_reta_entry64' which contains 64 entries and 64 bits mask. - Array of above new structure can be used for any number of redirection table entries, as long as the number is multiple of 64. This is quite flexible for the future expanding of redirection table. * Redefinition of relevant interfaces in ethdev. - Interface of reta update has been redefined with new parameters. - Interface of reta query has been redefined with new parameters. * Rework of 1G PMD in igb. - reta update has been reworked. - reta query has been reworked. * Rework of 10G PMD in ixgbe. - reta update has been reworked. - reta query has been reworked. * Rework of 40G PMD (PF only) in i40e. - reta update has been reworked. - reta query has been reworked. * Implement relevant commands in testpmd. Test report: http://dpdk.org/ml/archives/dev/2014-November/008362.html Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Tested-by: Erlu Chen <erlu.chen@intel.com>
2014-11-15 16:03:43 +00:00
uint8_t i, j, mask;
uint32_t reta, r;
uint16_t idx, shift;
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
remove trailing whitespaces This commit removes trailing whitespace from lines in files. Almost all files are affected, as the BSD license copyright header had trailing whitespace on 4 lines in it [hence the number of files reporting 8 lines changed in the diffstat]. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> [Thomas: remove spaces before tabs in libs] [Thomas: remove more trailing spaces in non-C files] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-03 23:42:50 +00:00
ethdev: support multiple sizes of redirection table As 40G NIC supports different sizes (128/512/64 entries) of redirection table from that (128 entries) of 1G and 10G NICs, support of multiple sizes of redirection table is needed. It includes, * Redefine 'struct rte_eth_rss_reta' in ethdev. - To 'struct rte_eth_rss_reta_entry64' which contains 64 entries and 64 bits mask. - Array of above new structure can be used for any number of redirection table entries, as long as the number is multiple of 64. This is quite flexible for the future expanding of redirection table. * Redefinition of relevant interfaces in ethdev. - Interface of reta update has been redefined with new parameters. - Interface of reta query has been redefined with new parameters. * Rework of 1G PMD in igb. - reta update has been reworked. - reta query has been reworked. * Rework of 10G PMD in ixgbe. - reta update has been reworked. - reta query has been reworked. * Rework of 40G PMD (PF only) in i40e. - reta update has been reworked. - reta query has been reworked. * Implement relevant commands in testpmd. Test report: http://dpdk.org/ml/archives/dev/2014-November/008362.html Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Tested-by: Erlu Chen <erlu.chen@intel.com>
2014-11-15 16:03:43 +00:00
if (reta_size != ETH_RSS_RETA_SIZE_128) {
PMD_DRV_LOG(ERR, "The size of hash lookup table configured "
"(%d) doesn't match the number hardware can supported "
drivers/net: remove redundant new line from logs Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org>
2017-01-27 15:16:32 +00:00
"(%d)", reta_size, ETH_RSS_RETA_SIZE_128);
ethdev: support multiple sizes of redirection table As 40G NIC supports different sizes (128/512/64 entries) of redirection table from that (128 entries) of 1G and 10G NICs, support of multiple sizes of redirection table is needed. It includes, * Redefine 'struct rte_eth_rss_reta' in ethdev. - To 'struct rte_eth_rss_reta_entry64' which contains 64 entries and 64 bits mask. - Array of above new structure can be used for any number of redirection table entries, as long as the number is multiple of 64. This is quite flexible for the future expanding of redirection table. * Redefinition of relevant interfaces in ethdev. - Interface of reta update has been redefined with new parameters. - Interface of reta query has been redefined with new parameters. * Rework of 1G PMD in igb. - reta update has been reworked. - reta query has been reworked. * Rework of 10G PMD in ixgbe. - reta update has been reworked. - reta query has been reworked. * Rework of 40G PMD (PF only) in i40e. - reta update has been reworked. - reta query has been reworked. * Implement relevant commands in testpmd. Test report: http://dpdk.org/ml/archives/dev/2014-November/008362.html Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Tested-by: Erlu Chen <erlu.chen@intel.com>
2014-11-15 16:03:43 +00:00
return -EINVAL;
}
for (i = 0; i < reta_size; i += IGB_4_BIT_WIDTH) {
idx = i / RTE_RETA_GROUP_SIZE;
shift = i % RTE_RETA_GROUP_SIZE;
mask = (uint8_t)((reta_conf[idx].mask >> shift) &
IGB_4_BIT_MASK);
if (!mask)
continue;
if (mask == IGB_4_BIT_MASK)
r = 0;
igb: RSS RETA configuration Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
else
ethdev: support multiple sizes of redirection table As 40G NIC supports different sizes (128/512/64 entries) of redirection table from that (128 entries) of 1G and 10G NICs, support of multiple sizes of redirection table is needed. It includes, * Redefine 'struct rte_eth_rss_reta' in ethdev. - To 'struct rte_eth_rss_reta_entry64' which contains 64 entries and 64 bits mask. - Array of above new structure can be used for any number of redirection table entries, as long as the number is multiple of 64. This is quite flexible for the future expanding of redirection table. * Redefinition of relevant interfaces in ethdev. - Interface of reta update has been redefined with new parameters. - Interface of reta query has been redefined with new parameters. * Rework of 1G PMD in igb. - reta update has been reworked. - reta query has been reworked. * Rework of 10G PMD in ixgbe. - reta update has been reworked. - reta query has been reworked. * Rework of 40G PMD (PF only) in i40e. - reta update has been reworked. - reta query has been reworked. * Implement relevant commands in testpmd. Test report: http://dpdk.org/ml/archives/dev/2014-November/008362.html Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Tested-by: Erlu Chen <erlu.chen@intel.com>
2014-11-15 16:03:43 +00:00
r = E1000_READ_REG(hw, E1000_RETA(i >> 2));
for (j = 0, reta = 0; j < IGB_4_BIT_WIDTH; j++) {
if (mask & (0x1 << j))
reta |= reta_conf[idx].reta[shift + j] <<
(CHAR_BIT * j);
else
reta |= r & (IGB_8_BIT_MASK << (CHAR_BIT * j));
igb: RSS RETA configuration Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
}
ethdev: support multiple sizes of redirection table As 40G NIC supports different sizes (128/512/64 entries) of redirection table from that (128 entries) of 1G and 10G NICs, support of multiple sizes of redirection table is needed. It includes, * Redefine 'struct rte_eth_rss_reta' in ethdev. - To 'struct rte_eth_rss_reta_entry64' which contains 64 entries and 64 bits mask. - Array of above new structure can be used for any number of redirection table entries, as long as the number is multiple of 64. This is quite flexible for the future expanding of redirection table. * Redefinition of relevant interfaces in ethdev. - Interface of reta update has been redefined with new parameters. - Interface of reta query has been redefined with new parameters. * Rework of 1G PMD in igb. - reta update has been reworked. - reta query has been reworked. * Rework of 10G PMD in ixgbe. - reta update has been reworked. - reta query has been reworked. * Rework of 40G PMD (PF only) in i40e. - reta update has been reworked. - reta query has been reworked. * Implement relevant commands in testpmd. Test report: http://dpdk.org/ml/archives/dev/2014-November/008362.html Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Tested-by: Erlu Chen <erlu.chen@intel.com>
2014-11-15 16:03:43 +00:00
E1000_WRITE_REG(hw, E1000_RETA(i >> 2), reta);
igb: RSS RETA configuration Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
}
return 0;
}
static int
eth_igb_rss_reta_query(struct rte_eth_dev *dev,
ethdev: support multiple sizes of redirection table As 40G NIC supports different sizes (128/512/64 entries) of redirection table from that (128 entries) of 1G and 10G NICs, support of multiple sizes of redirection table is needed. It includes, * Redefine 'struct rte_eth_rss_reta' in ethdev. - To 'struct rte_eth_rss_reta_entry64' which contains 64 entries and 64 bits mask. - Array of above new structure can be used for any number of redirection table entries, as long as the number is multiple of 64. This is quite flexible for the future expanding of redirection table. * Redefinition of relevant interfaces in ethdev. - Interface of reta update has been redefined with new parameters. - Interface of reta query has been redefined with new parameters. * Rework of 1G PMD in igb. - reta update has been reworked. - reta query has been reworked. * Rework of 10G PMD in ixgbe. - reta update has been reworked. - reta query has been reworked. * Rework of 40G PMD (PF only) in i40e. - reta update has been reworked. - reta query has been reworked. * Implement relevant commands in testpmd. Test report: http://dpdk.org/ml/archives/dev/2014-November/008362.html Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Tested-by: Erlu Chen <erlu.chen@intel.com>
2014-11-15 16:03:43 +00:00
struct rte_eth_rss_reta_entry64 *reta_conf,
uint16_t reta_size)
igb: RSS RETA configuration Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
{
ethdev: support multiple sizes of redirection table As 40G NIC supports different sizes (128/512/64 entries) of redirection table from that (128 entries) of 1G and 10G NICs, support of multiple sizes of redirection table is needed. It includes, * Redefine 'struct rte_eth_rss_reta' in ethdev. - To 'struct rte_eth_rss_reta_entry64' which contains 64 entries and 64 bits mask. - Array of above new structure can be used for any number of redirection table entries, as long as the number is multiple of 64. This is quite flexible for the future expanding of redirection table. * Redefinition of relevant interfaces in ethdev. - Interface of reta update has been redefined with new parameters. - Interface of reta query has been redefined with new parameters. * Rework of 1G PMD in igb. - reta update has been reworked. - reta query has been reworked. * Rework of 10G PMD in ixgbe. - reta update has been reworked. - reta query has been reworked. * Rework of 40G PMD (PF only) in i40e. - reta update has been reworked. - reta query has been reworked. * Implement relevant commands in testpmd. Test report: http://dpdk.org/ml/archives/dev/2014-November/008362.html Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Tested-by: Erlu Chen <erlu.chen@intel.com>
2014-11-15 16:03:43 +00:00
uint8_t i, j, mask;
igb: RSS RETA configuration Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
uint32_t reta;
ethdev: support multiple sizes of redirection table As 40G NIC supports different sizes (128/512/64 entries) of redirection table from that (128 entries) of 1G and 10G NICs, support of multiple sizes of redirection table is needed. It includes, * Redefine 'struct rte_eth_rss_reta' in ethdev. - To 'struct rte_eth_rss_reta_entry64' which contains 64 entries and 64 bits mask. - Array of above new structure can be used for any number of redirection table entries, as long as the number is multiple of 64. This is quite flexible for the future expanding of redirection table. * Redefinition of relevant interfaces in ethdev. - Interface of reta update has been redefined with new parameters. - Interface of reta query has been redefined with new parameters. * Rework of 1G PMD in igb. - reta update has been reworked. - reta query has been reworked. * Rework of 10G PMD in ixgbe. - reta update has been reworked. - reta query has been reworked. * Rework of 40G PMD (PF only) in i40e. - reta update has been reworked. - reta query has been reworked. * Implement relevant commands in testpmd. Test report: http://dpdk.org/ml/archives/dev/2014-November/008362.html Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Tested-by: Erlu Chen <erlu.chen@intel.com>
2014-11-15 16:03:43 +00:00
uint16_t idx, shift;
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
igb: RSS RETA configuration Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
ethdev: support multiple sizes of redirection table As 40G NIC supports different sizes (128/512/64 entries) of redirection table from that (128 entries) of 1G and 10G NICs, support of multiple sizes of redirection table is needed. It includes, * Redefine 'struct rte_eth_rss_reta' in ethdev. - To 'struct rte_eth_rss_reta_entry64' which contains 64 entries and 64 bits mask. - Array of above new structure can be used for any number of redirection table entries, as long as the number is multiple of 64. This is quite flexible for the future expanding of redirection table. * Redefinition of relevant interfaces in ethdev. - Interface of reta update has been redefined with new parameters. - Interface of reta query has been redefined with new parameters. * Rework of 1G PMD in igb. - reta update has been reworked. - reta query has been reworked. * Rework of 10G PMD in ixgbe. - reta update has been reworked. - reta query has been reworked. * Rework of 40G PMD (PF only) in i40e. - reta update has been reworked. - reta query has been reworked. * Implement relevant commands in testpmd. Test report: http://dpdk.org/ml/archives/dev/2014-November/008362.html Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Tested-by: Erlu Chen <erlu.chen@intel.com>
2014-11-15 16:03:43 +00:00
if (reta_size != ETH_RSS_RETA_SIZE_128) {
PMD_DRV_LOG(ERR, "The size of hash lookup table configured "
"(%d) doesn't match the number hardware can supported "
drivers/net: remove redundant new line from logs Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org>
2017-01-27 15:16:32 +00:00
"(%d)", reta_size, ETH_RSS_RETA_SIZE_128);
ethdev: support multiple sizes of redirection table As 40G NIC supports different sizes (128/512/64 entries) of redirection table from that (128 entries) of 1G and 10G NICs, support of multiple sizes of redirection table is needed. It includes, * Redefine 'struct rte_eth_rss_reta' in ethdev. - To 'struct rte_eth_rss_reta_entry64' which contains 64 entries and 64 bits mask. - Array of above new structure can be used for any number of redirection table entries, as long as the number is multiple of 64. This is quite flexible for the future expanding of redirection table. * Redefinition of relevant interfaces in ethdev. - Interface of reta update has been redefined with new parameters. - Interface of reta query has been redefined with new parameters. * Rework of 1G PMD in igb. - reta update has been reworked. - reta query has been reworked. * Rework of 10G PMD in ixgbe. - reta update has been reworked. - reta query has been reworked. * Rework of 40G PMD (PF only) in i40e. - reta update has been reworked. - reta query has been reworked. * Implement relevant commands in testpmd. Test report: http://dpdk.org/ml/archives/dev/2014-November/008362.html Signed-off-by: Helin Zhang <helin.zhang@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Tested-by: Erlu Chen <erlu.chen@intel.com>
2014-11-15 16:03:43 +00:00
return -EINVAL;
}
for (i = 0; i < reta_size; i += IGB_4_BIT_WIDTH) {
idx = i / RTE_RETA_GROUP_SIZE;
shift = i % RTE_RETA_GROUP_SIZE;
mask = (uint8_t)((reta_conf[idx].mask >> shift) &
IGB_4_BIT_MASK);
if (!mask)
continue;
reta = E1000_READ_REG(hw, E1000_RETA(i >> 2));
for (j = 0; j < IGB_4_BIT_WIDTH; j++) {
if (mask & (0x1 << j))
reta_conf[idx].reta[shift + j] =
((reta >> (CHAR_BIT * j)) &
IGB_8_BIT_MASK);
igb: RSS RETA configuration Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
}
}
remove trailing whitespaces This commit removes trailing whitespace from lines in files. Almost all files are affected, as the BSD license copyright header had trailing whitespace on 4 lines in it [hence the number of files reporting 8 lines changed in the diffstat]. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> [Thomas: remove spaces before tabs in libs] [Thomas: remove more trailing spaces in non-C files] Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-03 23:42:50 +00:00
igb: RSS RETA configuration Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
return 0;
}
igb: convert to use of PMD_REGISTER_DRIVER and fix linking Convert the igb pmd driver to use the PMD_REGISTER_DRIVER macro. This means that the test applications now have no reference to the igb library when building DSO's and must specify its use on the command line with the -d option. Static linking will still initalize the driver automatically. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-04-21 14:59:32 +00:00
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
#define MAC_TYPE_FILTER_SUP(type) do {\
if ((type) != e1000_82580 && (type) != e1000_i350 &&\
(type) != e1000_82576)\
igb: use generic filter control for ethertype filter This patch removes old functions which deal with ethertype filter in igb driver. It also defines eth_igb_filter_ctrl which is binding to filter_ctrl API, and ethertype filter can be dealt with through this new entrance. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-01-12 07:16:11 +00:00
return -ENOTSUP;\
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
} while (0)
static int
igb: migrate syn filter to new API This patch defines new functions dealing with syn filter. It removes old functions of syn filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-11 07:51:47 +00:00
eth_igb_syn_filter_set(struct rte_eth_dev *dev,
struct rte_eth_syn_filter *filter,
bool add)
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
uint32_t synqf, rfctl;
igb: migrate syn filter to new API This patch defines new functions dealing with syn filter. It removes old functions of syn filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-11 07:51:47 +00:00
if (filter->queue >= IGB_MAX_RX_QUEUE_NUM)
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
return -EINVAL;
synqf = E1000_READ_REG(hw, E1000_SYNQF(0));
igb: migrate syn filter to new API This patch defines new functions dealing with syn filter. It removes old functions of syn filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-11 07:51:47 +00:00
if (add) {
if (synqf & E1000_SYN_FILTER_ENABLE)
return -EINVAL;
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
igb: migrate syn filter to new API This patch defines new functions dealing with syn filter. It removes old functions of syn filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-11 07:51:47 +00:00
synqf = (uint32_t)(((filter->queue << E1000_SYN_FILTER_QUEUE_SHIFT) &
E1000_SYN_FILTER_QUEUE) | E1000_SYN_FILTER_ENABLE);
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
igb: migrate syn filter to new API This patch defines new functions dealing with syn filter. It removes old functions of syn filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-11 07:51:47 +00:00
rfctl = E1000_READ_REG(hw, E1000_RFCTL);
if (filter->hig_pri)
rfctl |= E1000_RFCTL_SYNQFP;
else
rfctl &= ~E1000_RFCTL_SYNQFP;
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
igb: migrate syn filter to new API This patch defines new functions dealing with syn filter. It removes old functions of syn filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-11 07:51:47 +00:00
E1000_WRITE_REG(hw, E1000_RFCTL, rfctl);
} else {
if (!(synqf & E1000_SYN_FILTER_ENABLE))
return -ENOENT;
synqf = 0;
}
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
igb: migrate syn filter to new API This patch defines new functions dealing with syn filter. It removes old functions of syn filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-11 07:51:47 +00:00
E1000_WRITE_REG(hw, E1000_SYNQF(0), synqf);
E1000_WRITE_FLUSH(hw);
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
return 0;
}
static int
igb: migrate syn filter to new API This patch defines new functions dealing with syn filter. It removes old functions of syn filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-11 07:51:47 +00:00
eth_igb_syn_filter_get(struct rte_eth_dev *dev,
struct rte_eth_syn_filter *filter)
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
uint32_t synqf, rfctl;
synqf = E1000_READ_REG(hw, E1000_SYNQF(0));
if (synqf & E1000_SYN_FILTER_ENABLE) {
rfctl = E1000_READ_REG(hw, E1000_RFCTL);
filter->hig_pri = (rfctl & E1000_RFCTL_SYNQFP) ? 1 : 0;
igb: migrate syn filter to new API This patch defines new functions dealing with syn filter. It removes old functions of syn filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-11 07:51:47 +00:00
filter->queue = (uint8_t)((synqf & E1000_SYN_FILTER_QUEUE) >>
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
E1000_SYN_FILTER_QUEUE_SHIFT);
return 0;
}
igb: migrate syn filter to new API This patch defines new functions dealing with syn filter. It removes old functions of syn filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-11 07:51:47 +00:00
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
return -ENOENT;
}
igb: migrate syn filter to new API This patch defines new functions dealing with syn filter. It removes old functions of syn filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-11 07:51:47 +00:00
static int
eth_igb_syn_filter_handle(struct rte_eth_dev *dev,
enum rte_filter_op filter_op,
void *arg)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
int ret;
MAC_TYPE_FILTER_SUP(hw->mac.type);
if (filter_op == RTE_ETH_FILTER_NOP)
return 0;
if (arg == NULL) {
PMD_DRV_LOG(ERR, "arg shouldn't be NULL for operation %u",
filter_op);
return -EINVAL;
}
switch (filter_op) {
case RTE_ETH_FILTER_ADD:
ret = eth_igb_syn_filter_set(dev,
(struct rte_eth_syn_filter *)arg,
TRUE);
break;
case RTE_ETH_FILTER_DELETE:
ret = eth_igb_syn_filter_set(dev,
(struct rte_eth_syn_filter *)arg,
FALSE);
break;
case RTE_ETH_FILTER_GET:
ret = eth_igb_syn_filter_get(dev,
(struct rte_eth_syn_filter *)arg);
break;
default:
drivers/net: remove redundant new line from logs Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org>
2017-01-27 15:16:32 +00:00
PMD_DRV_LOG(ERR, "unsupported operation %u", filter_op);
igb: migrate syn filter to new API This patch defines new functions dealing with syn filter. It removes old functions of syn filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-11 07:51:47 +00:00
ret = -EINVAL;
break;
}
return ret;
}
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
#define MAC_TYPE_FILTER_SUP_EXT(type) do {\
if ((type) != e1000_82580 && (type) != e1000_i350)\
return -ENOSYS; \
} while (0)
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
/* translate elements in struct rte_eth_ntuple_filter to struct e1000_2tuple_filter_info*/
static inline int
ntuple_filter_to_2tuple(struct rte_eth_ntuple_filter *filter,
struct e1000_2tuple_filter_info *filter_info)
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
{
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
if (filter->queue >= IGB_MAX_RX_QUEUE_NUM)
return -EINVAL;
if (filter->priority > E1000_2TUPLE_MAX_PRI)
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
return -EINVAL; /* filter index is out of range. */
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
if (filter->tcp_flags > TCP_FLAG_ALL)
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
return -EINVAL; /* flags is invalid. */
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
switch (filter->dst_port_mask) {
case UINT16_MAX:
filter_info->dst_port_mask = 0;
filter_info->dst_port = filter->dst_port;
break;
case 0:
filter_info->dst_port_mask = 1;
break;
default:
PMD_DRV_LOG(ERR, "invalid dst_port mask.");
return -EINVAL;
}
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
switch (filter->proto_mask) {
case UINT8_MAX:
filter_info->proto_mask = 0;
filter_info->proto = filter->proto;
break;
case 0:
filter_info->proto_mask = 1;
break;
default:
PMD_DRV_LOG(ERR, "invalid protocol mask.");
return -EINVAL;
}
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
filter_info->priority = (uint8_t)filter->priority;
if (filter->flags & RTE_NTUPLE_FLAGS_TCP_FLAG)
filter_info->tcp_flags = filter->tcp_flags;
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
else
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
filter_info->tcp_flags = 0;
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
return 0;
}
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
static inline struct e1000_2tuple_filter *
igb_2tuple_filter_lookup(struct e1000_2tuple_filter_list *filter_list,
struct e1000_2tuple_filter_info *key)
{
struct e1000_2tuple_filter *it;
TAILQ_FOREACH(it, filter_list, entries) {
if (memcmp(key, &it->filter_info,
sizeof(struct e1000_2tuple_filter_info)) == 0) {
return it;
}
}
return NULL;
}
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
/*
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
* igb_add_2tuple_filter - add a 2tuple filter
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
*
* @param
* dev: Pointer to struct rte_eth_dev.
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
* ntuple_filter: ponter to the filter that will be added.
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
*
* @return
* - On success, zero.
* - On failure, a negative value.
*/
static int
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
igb_add_2tuple_filter(struct rte_eth_dev *dev,
struct rte_eth_ntuple_filter *ntuple_filter)
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
struct e1000_filter_info *filter_info =
E1000_DEV_PRIVATE_TO_FILTER_INFO(dev->data->dev_private);
struct e1000_2tuple_filter *filter;
uint32_t ttqf = E1000_TTQF_DISABLE_MASK;
uint32_t imir, imir_ext = E1000_IMIREXT_SIZE_BP;
int i, ret;
filter = rte_zmalloc("e1000_2tuple_filter",
sizeof(struct e1000_2tuple_filter), 0);
if (filter == NULL)
return -ENOMEM;
ret = ntuple_filter_to_2tuple(ntuple_filter,
&filter->filter_info);
if (ret < 0) {
rte_free(filter);
return ret;
}
if (igb_2tuple_filter_lookup(&filter_info->twotuple_list,
&filter->filter_info) != NULL) {
PMD_DRV_LOG(ERR, "filter exists.");
rte_free(filter);
return -EEXIST;
}
filter->queue = ntuple_filter->queue;
/*
* look for an unused 2tuple filter index,
* and insert the filter to list.
*/
for (i = 0; i < E1000_MAX_TTQF_FILTERS; i++) {
if (!(filter_info->twotuple_mask & (1 << i))) {
filter_info->twotuple_mask |= 1 << i;
filter->index = i;
TAILQ_INSERT_TAIL(&filter_info->twotuple_list,
filter,
entries);
break;
}
}
if (i >= E1000_MAX_TTQF_FILTERS) {
PMD_DRV_LOG(ERR, "2tuple filters are full.");
rte_free(filter);
return -ENOSYS;
}
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
imir = (uint32_t)(filter->filter_info.dst_port & E1000_IMIR_DSTPORT);
if (filter->filter_info.dst_port_mask == 1) /* 1b means not compare. */
imir |= E1000_IMIR_PORT_BP;
else
imir &= ~E1000_IMIR_PORT_BP;
imir |= filter->filter_info.priority << E1000_IMIR_PRIORITY_SHIFT;
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
ttqf |= E1000_TTQF_QUEUE_ENABLE;
ttqf |= (uint32_t)(filter->queue << E1000_TTQF_QUEUE_SHIFT);
ttqf |= (uint32_t)(filter->filter_info.proto & E1000_TTQF_PROTOCOL_MASK);
if (filter->filter_info.proto_mask == 0)
ttqf &= ~E1000_TTQF_MASK_ENABLE;
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
/* tcp flags bits setting. */
if (filter->filter_info.tcp_flags & TCP_FLAG_ALL) {
if (filter->filter_info.tcp_flags & TCP_URG_FLAG)
imir_ext |= E1000_IMIREXT_CTRL_URG;
if (filter->filter_info.tcp_flags & TCP_ACK_FLAG)
imir_ext |= E1000_IMIREXT_CTRL_ACK;
if (filter->filter_info.tcp_flags & TCP_PSH_FLAG)
imir_ext |= E1000_IMIREXT_CTRL_PSH;
if (filter->filter_info.tcp_flags & TCP_RST_FLAG)
imir_ext |= E1000_IMIREXT_CTRL_RST;
if (filter->filter_info.tcp_flags & TCP_SYN_FLAG)
imir_ext |= E1000_IMIREXT_CTRL_SYN;
if (filter->filter_info.tcp_flags & TCP_FIN_FLAG)
imir_ext |= E1000_IMIREXT_CTRL_FIN;
} else
imir_ext |= E1000_IMIREXT_CTRL_BP;
E1000_WRITE_REG(hw, E1000_IMIR(i), imir);
E1000_WRITE_REG(hw, E1000_TTQF(i), ttqf);
E1000_WRITE_REG(hw, E1000_IMIREXT(i), imir_ext);
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
return 0;
}
/*
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
* igb_remove_2tuple_filter - remove a 2tuple filter
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
*
* @param
* dev: Pointer to struct rte_eth_dev.
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
* ntuple_filter: ponter to the filter that will be removed.
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
*
* @return
* - On success, zero.
* - On failure, a negative value.
*/
static int
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
igb_remove_2tuple_filter(struct rte_eth_dev *dev,
struct rte_eth_ntuple_filter *ntuple_filter)
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
struct e1000_filter_info *filter_info =
E1000_DEV_PRIVATE_TO_FILTER_INFO(dev->data->dev_private);
struct e1000_2tuple_filter_info filter_2tuple;
struct e1000_2tuple_filter *filter;
int ret;
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
memset(&filter_2tuple, 0, sizeof(struct e1000_2tuple_filter_info));
ret = ntuple_filter_to_2tuple(ntuple_filter,
&filter_2tuple);
if (ret < 0)
return ret;
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
filter = igb_2tuple_filter_lookup(&filter_info->twotuple_list,
&filter_2tuple);
if (filter == NULL) {
PMD_DRV_LOG(ERR, "filter doesn't exist.");
return -ENOENT;
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
}
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
filter_info->twotuple_mask &= ~(1 << filter->index);
TAILQ_REMOVE(&filter_info->twotuple_list, filter, entries);
rte_free(filter);
E1000_WRITE_REG(hw, E1000_TTQF(filter->index), E1000_TTQF_DISABLE_MASK);
E1000_WRITE_REG(hw, E1000_IMIR(filter->index), 0);
E1000_WRITE_REG(hw, E1000_IMIREXT(filter->index), 0);
return 0;
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
}
igb: migrate flex filter to new API This patch defines new functions dealing with flex filter. It removes old functions of flex filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-21 01:53:08 +00:00
static inline struct e1000_flex_filter *
eth_igb_flex_filter_lookup(struct e1000_flex_filter_list *filter_list,
struct e1000_flex_filter_info *key)
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
{
igb: migrate flex filter to new API This patch defines new functions dealing with flex filter. It removes old functions of flex filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-21 01:53:08 +00:00
struct e1000_flex_filter *it;
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
igb: migrate flex filter to new API This patch defines new functions dealing with flex filter. It removes old functions of flex filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-21 01:53:08 +00:00
TAILQ_FOREACH(it, filter_list, entries) {
if (memcmp(key, &it->filter_info,
sizeof(struct e1000_flex_filter_info)) == 0)
return it;
}
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
igb: migrate flex filter to new API This patch defines new functions dealing with flex filter. It removes old functions of flex filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-21 01:53:08 +00:00
return NULL;
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
}
static int
igb: migrate flex filter to new API This patch defines new functions dealing with flex filter. It removes old functions of flex filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-21 01:53:08 +00:00
eth_igb_add_del_flex_filter(struct rte_eth_dev *dev,
struct rte_eth_flex_filter *filter,
bool add)
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
igb: migrate flex filter to new API This patch defines new functions dealing with flex filter. It removes old functions of flex filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-21 01:53:08 +00:00
struct e1000_filter_info *filter_info =
E1000_DEV_PRIVATE_TO_FILTER_INFO(dev->data->dev_private);
struct e1000_flex_filter *flex_filter, *it;
uint32_t wufc, queueing, mask;
uint32_t reg_off;
uint8_t shift, i, j = 0;
flex_filter = rte_zmalloc("e1000_flex_filter",
sizeof(struct e1000_flex_filter), 0);
if (flex_filter == NULL)
return -ENOMEM;
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
igb: migrate flex filter to new API This patch defines new functions dealing with flex filter. It removes old functions of flex filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-21 01:53:08 +00:00
flex_filter->filter_info.len = filter->len;
flex_filter->filter_info.priority = filter->priority;
memcpy(flex_filter->filter_info.dwords, filter->bytes, filter->len);
for (i = 0; i < RTE_ALIGN(filter->len, CHAR_BIT) / CHAR_BIT; i++) {
mask = 0;
/* reverse bits in flex filter's mask*/
for (shift = 0; shift < CHAR_BIT; shift++) {
if (filter->mask[i] & (0x01 << shift))
mask |= (0x80 >> shift);
}
flex_filter->filter_info.mask[i] = mask;
}
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
wufc = E1000_READ_REG(hw, E1000_WUFC);
igb: migrate flex filter to new API This patch defines new functions dealing with flex filter. It removes old functions of flex filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-21 01:53:08 +00:00
if (flex_filter->index < E1000_MAX_FHFT)
reg_off = E1000_FHFT(flex_filter->index);
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
else
igb: migrate flex filter to new API This patch defines new functions dealing with flex filter. It removes old functions of flex filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-21 01:53:08 +00:00
reg_off = E1000_FHFT_EXT(flex_filter->index - E1000_MAX_FHFT);
if (add) {
if (eth_igb_flex_filter_lookup(&filter_info->flex_list,
&flex_filter->filter_info) != NULL) {
PMD_DRV_LOG(ERR, "filter exists.");
rte_free(flex_filter);
return -EEXIST;
}
flex_filter->queue = filter->queue;
/*
* look for an unused flex filter index
* and insert the filter into the list.
*/
for (i = 0; i < E1000_MAX_FLEX_FILTERS; i++) {
if (!(filter_info->flex_mask & (1 << i))) {
filter_info->flex_mask |= 1 << i;
flex_filter->index = i;
TAILQ_INSERT_TAIL(&filter_info->flex_list,
flex_filter,
entries);
break;
}
}
if (i >= E1000_MAX_FLEX_FILTERS) {
PMD_DRV_LOG(ERR, "flex filters are full.");
rte_free(flex_filter);
return -ENOSYS;
}
E1000_WRITE_REG(hw, E1000_WUFC, wufc | E1000_WUFC_FLEX_HQ |
(E1000_WUFC_FLX0 << flex_filter->index));
queueing = filter->len |
(filter->queue << E1000_FHFT_QUEUEING_QUEUE_SHIFT) |
(filter->priority << E1000_FHFT_QUEUEING_PRIO_SHIFT);
E1000_WRITE_REG(hw, reg_off + E1000_FHFT_QUEUEING_OFFSET,
queueing);
for (i = 0; i < E1000_FLEX_FILTERS_MASK_SIZE; i++) {
E1000_WRITE_REG(hw, reg_off,
flex_filter->filter_info.dwords[j]);
reg_off += sizeof(uint32_t);
E1000_WRITE_REG(hw, reg_off,
flex_filter->filter_info.dwords[++j]);
reg_off += sizeof(uint32_t);
E1000_WRITE_REG(hw, reg_off,
(uint32_t)flex_filter->filter_info.mask[i]);
reg_off += sizeof(uint32_t) * 2;
++j;
}
} else {
it = eth_igb_flex_filter_lookup(&filter_info->flex_list,
&flex_filter->filter_info);
if (it == NULL) {
PMD_DRV_LOG(ERR, "filter doesn't exist.");
rte_free(flex_filter);
return -ENOENT;
}
for (i = 0; i < E1000_FHFT_SIZE_IN_DWD; i++)
E1000_WRITE_REG(hw, reg_off + i * sizeof(uint32_t), 0);
E1000_WRITE_REG(hw, E1000_WUFC, wufc &
(~(E1000_WUFC_FLX0 << it->index)));
filter_info->flex_mask &= ~(1 << it->index);
TAILQ_REMOVE(&filter_info->flex_list, it, entries);
rte_free(it);
rte_free(flex_filter);
}
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
return 0;
}
static int
igb: migrate flex filter to new API This patch defines new functions dealing with flex filter. It removes old functions of flex filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-21 01:53:08 +00:00
eth_igb_get_flex_filter(struct rte_eth_dev *dev,
struct rte_eth_flex_filter *filter)
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
igb: migrate flex filter to new API This patch defines new functions dealing with flex filter. It removes old functions of flex filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-21 01:53:08 +00:00
struct e1000_filter_info *filter_info =
E1000_DEV_PRIVATE_TO_FILTER_INFO(dev->data->dev_private);
struct e1000_flex_filter flex_filter, *it;
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
uint32_t wufc, queueing, wufc_en = 0;
igb: migrate flex filter to new API This patch defines new functions dealing with flex filter. It removes old functions of flex filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-21 01:53:08 +00:00
memset(&flex_filter, 0, sizeof(struct e1000_flex_filter));
flex_filter.filter_info.len = filter->len;
flex_filter.filter_info.priority = filter->priority;
memcpy(flex_filter.filter_info.dwords, filter->bytes, filter->len);
memcpy(flex_filter.filter_info.mask, filter->mask,
RTE_ALIGN(filter->len, sizeof(char)) / sizeof(char));
it = eth_igb_flex_filter_lookup(&filter_info->flex_list,
&flex_filter.filter_info);
if (it == NULL) {
PMD_DRV_LOG(ERR, "filter doesn't exist.");
return -ENOENT;
}
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
wufc = E1000_READ_REG(hw, E1000_WUFC);
igb: migrate flex filter to new API This patch defines new functions dealing with flex filter. It removes old functions of flex filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-21 01:53:08 +00:00
wufc_en = E1000_WUFC_FLEX_HQ | (E1000_WUFC_FLX0 << it->index);
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
if ((wufc & wufc_en) == wufc_en) {
uint32_t reg_off = 0;
igb: migrate flex filter to new API This patch defines new functions dealing with flex filter. It removes old functions of flex filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-21 01:53:08 +00:00
if (it->index < E1000_MAX_FHFT)
reg_off = E1000_FHFT(it->index);
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
else
igb: migrate flex filter to new API This patch defines new functions dealing with flex filter. It removes old functions of flex filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-21 01:53:08 +00:00
reg_off = E1000_FHFT_EXT(it->index - E1000_MAX_FHFT);
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
queueing = E1000_READ_REG(hw,
reg_off + E1000_FHFT_QUEUEING_OFFSET);
filter->len = queueing & E1000_FHFT_QUEUEING_LEN;
filter->priority = (queueing & E1000_FHFT_QUEUEING_PRIO) >>
E1000_FHFT_QUEUEING_PRIO_SHIFT;
igb: migrate flex filter to new API This patch defines new functions dealing with flex filter. It removes old functions of flex filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-21 01:53:08 +00:00
filter->queue = (queueing & E1000_FHFT_QUEUEING_QUEUE) >>
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
E1000_FHFT_QUEUEING_QUEUE_SHIFT;
return 0;
}
return -ENOENT;
}
igb: migrate flex filter to new API This patch defines new functions dealing with flex filter. It removes old functions of flex filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-21 01:53:08 +00:00
static int
eth_igb_flex_filter_handle(struct rte_eth_dev *dev,
enum rte_filter_op filter_op,
void *arg)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct rte_eth_flex_filter *filter;
int ret = 0;
igb: fix flex filter check for unsupported 82576 Flex filter is currently not supported for NIC 82576. Only i350 and 82580 support it. So The MAC_TYPE_FILTER_SUP_EXT is used to check whether the MAC type is i350 or 82580. Fixes: 231d43909a31 ("igb: migrate flex filter to new API") Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Marvin Liu <yong.liu@intel.com>
2015-03-26 04:53:21 +00:00
MAC_TYPE_FILTER_SUP_EXT(hw->mac.type);
igb: migrate flex filter to new API This patch defines new functions dealing with flex filter. It removes old functions of flex filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-21 01:53:08 +00:00
if (filter_op == RTE_ETH_FILTER_NOP)
return ret;
if (arg == NULL) {
PMD_DRV_LOG(ERR, "arg shouldn't be NULL for operation %u",
filter_op);
return -EINVAL;
}
filter = (struct rte_eth_flex_filter *)arg;
if (filter->len == 0 || filter->len > E1000_MAX_FLEX_FILTER_LEN
|| filter->len % sizeof(uint64_t) != 0) {
PMD_DRV_LOG(ERR, "filter's length is out of range");
return -EINVAL;
}
if (filter->priority > E1000_MAX_FLEX_FILTER_PRI) {
PMD_DRV_LOG(ERR, "filter's priority is out of range");
return -EINVAL;
}
switch (filter_op) {
case RTE_ETH_FILTER_ADD:
ret = eth_igb_add_del_flex_filter(dev, filter, TRUE);
break;
case RTE_ETH_FILTER_DELETE:
ret = eth_igb_add_del_flex_filter(dev, filter, FALSE);
break;
case RTE_ETH_FILTER_GET:
ret = eth_igb_get_flex_filter(dev, filter);
break;
default:
PMD_DRV_LOG(ERR, "unsupported operation %u", filter_op);
ret = -EINVAL;
break;
}
return ret;
}
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
/* translate elements in struct rte_eth_ntuple_filter to struct e1000_5tuple_filter_info*/
static inline int
ntuple_filter_to_5tuple_82576(struct rte_eth_ntuple_filter *filter,
struct e1000_5tuple_filter_info *filter_info)
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
{
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
if (filter->queue >= IGB_MAX_RX_QUEUE_NUM_82576)
return -EINVAL;
if (filter->priority > E1000_2TUPLE_MAX_PRI)
return -EINVAL; /* filter index is out of range. */
if (filter->tcp_flags > TCP_FLAG_ALL)
return -EINVAL; /* flags is invalid. */
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
switch (filter->dst_ip_mask) {
case UINT32_MAX:
filter_info->dst_ip_mask = 0;
filter_info->dst_ip = filter->dst_ip;
break;
case 0:
filter_info->dst_ip_mask = 1;
break;
default:
PMD_DRV_LOG(ERR, "invalid dst_ip mask.");
return -EINVAL;
}
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
switch (filter->src_ip_mask) {
case UINT32_MAX:
filter_info->src_ip_mask = 0;
filter_info->src_ip = filter->src_ip;
break;
case 0:
filter_info->src_ip_mask = 1;
break;
default:
PMD_DRV_LOG(ERR, "invalid src_ip mask.");
return -EINVAL;
}
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
switch (filter->dst_port_mask) {
case UINT16_MAX:
filter_info->dst_port_mask = 0;
filter_info->dst_port = filter->dst_port;
break;
case 0:
filter_info->dst_port_mask = 1;
break;
default:
PMD_DRV_LOG(ERR, "invalid dst_port mask.");
return -EINVAL;
}
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
switch (filter->src_port_mask) {
case UINT16_MAX:
filter_info->src_port_mask = 0;
filter_info->src_port = filter->src_port;
break;
case 0:
filter_info->src_port_mask = 1;
break;
default:
PMD_DRV_LOG(ERR, "invalid src_port mask.");
return -EINVAL;
}
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
switch (filter->proto_mask) {
case UINT8_MAX:
filter_info->proto_mask = 0;
filter_info->proto = filter->proto;
break;
case 0:
filter_info->proto_mask = 1;
break;
default:
PMD_DRV_LOG(ERR, "invalid protocol mask.");
return -EINVAL;
}
filter_info->priority = (uint8_t)filter->priority;
if (filter->flags & RTE_NTUPLE_FLAGS_TCP_FLAG)
filter_info->tcp_flags = filter->tcp_flags;
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
else
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
filter_info->tcp_flags = 0;
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
return 0;
}
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
static inline struct e1000_5tuple_filter *
igb_5tuple_filter_lookup_82576(struct e1000_5tuple_filter_list *filter_list,
struct e1000_5tuple_filter_info *key)
{
struct e1000_5tuple_filter *it;
TAILQ_FOREACH(it, filter_list, entries) {
if (memcmp(key, &it->filter_info,
sizeof(struct e1000_5tuple_filter_info)) == 0) {
return it;
}
}
return NULL;
}
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
/*
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
* igb_add_5tuple_filter_82576 - add a 5tuple filter
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
*
* @param
* dev: Pointer to struct rte_eth_dev.
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
* ntuple_filter: ponter to the filter that will be added.
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
*
* @return
* - On success, zero.
* - On failure, a negative value.
*/
static int
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
igb_add_5tuple_filter_82576(struct rte_eth_dev *dev,
struct rte_eth_ntuple_filter *ntuple_filter)
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
struct e1000_filter_info *filter_info =
E1000_DEV_PRIVATE_TO_FILTER_INFO(dev->data->dev_private);
struct e1000_5tuple_filter *filter;
uint32_t ftqf = E1000_FTQF_VF_BP | E1000_FTQF_MASK;
uint32_t spqf, imir, imir_ext = E1000_IMIREXT_SIZE_BP;
uint8_t i;
int ret;
filter = rte_zmalloc("e1000_5tuple_filter",
sizeof(struct e1000_5tuple_filter), 0);
if (filter == NULL)
return -ENOMEM;
ret = ntuple_filter_to_5tuple_82576(ntuple_filter,
&filter->filter_info);
if (ret < 0) {
rte_free(filter);
return ret;
}
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
if (igb_5tuple_filter_lookup_82576(&filter_info->fivetuple_list,
&filter->filter_info) != NULL) {
PMD_DRV_LOG(ERR, "filter exists.");
rte_free(filter);
return -EEXIST;
}
filter->queue = ntuple_filter->queue;
/*
* look for an unused 5tuple filter index,
* and insert the filter to list.
*/
for (i = 0; i < E1000_MAX_FTQF_FILTERS; i++) {
if (!(filter_info->fivetuple_mask & (1 << i))) {
filter_info->fivetuple_mask |= 1 << i;
filter->index = i;
TAILQ_INSERT_TAIL(&filter_info->fivetuple_list,
filter,
entries);
break;
}
}
if (i >= E1000_MAX_FTQF_FILTERS) {
PMD_DRV_LOG(ERR, "5tuple filters are full.");
rte_free(filter);
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
return -ENOSYS;
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
}
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
ftqf |= filter->filter_info.proto & E1000_FTQF_PROTOCOL_MASK;
if (filter->filter_info.src_ip_mask == 0) /* 0b means compare. */
ftqf &= ~E1000_FTQF_MASK_SOURCE_ADDR_BP;
if (filter->filter_info.dst_ip_mask == 0)
ftqf &= ~E1000_FTQF_MASK_DEST_ADDR_BP;
if (filter->filter_info.src_port_mask == 0)
ftqf &= ~E1000_FTQF_MASK_SOURCE_PORT_BP;
if (filter->filter_info.proto_mask == 0)
ftqf &= ~E1000_FTQF_MASK_PROTO_BP;
ftqf |= (filter->queue << E1000_FTQF_QUEUE_SHIFT) &
E1000_FTQF_QUEUE_MASK;
ftqf |= E1000_FTQF_QUEUE_ENABLE;
E1000_WRITE_REG(hw, E1000_FTQF(i), ftqf);
E1000_WRITE_REG(hw, E1000_DAQF(i), filter->filter_info.dst_ip);
E1000_WRITE_REG(hw, E1000_SAQF(i), filter->filter_info.src_ip);
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
spqf = filter->filter_info.src_port & E1000_SPQF_SRCPORT;
E1000_WRITE_REG(hw, E1000_SPQF(i), spqf);
imir = (uint32_t)(filter->filter_info.dst_port & E1000_IMIR_DSTPORT);
if (filter->filter_info.dst_port_mask == 1) /* 1b means not compare. */
imir |= E1000_IMIR_PORT_BP;
else
imir &= ~E1000_IMIR_PORT_BP;
imir |= filter->filter_info.priority << E1000_IMIR_PRIORITY_SHIFT;
/* tcp flags bits setting. */
if (filter->filter_info.tcp_flags & TCP_FLAG_ALL) {
if (filter->filter_info.tcp_flags & TCP_URG_FLAG)
imir_ext |= E1000_IMIREXT_CTRL_URG;
if (filter->filter_info.tcp_flags & TCP_ACK_FLAG)
imir_ext |= E1000_IMIREXT_CTRL_ACK;
if (filter->filter_info.tcp_flags & TCP_PSH_FLAG)
imir_ext |= E1000_IMIREXT_CTRL_PSH;
if (filter->filter_info.tcp_flags & TCP_RST_FLAG)
imir_ext |= E1000_IMIREXT_CTRL_RST;
if (filter->filter_info.tcp_flags & TCP_SYN_FLAG)
imir_ext |= E1000_IMIREXT_CTRL_SYN;
if (filter->filter_info.tcp_flags & TCP_FIN_FLAG)
imir_ext |= E1000_IMIREXT_CTRL_FIN;
} else
imir_ext |= E1000_IMIREXT_CTRL_BP;
E1000_WRITE_REG(hw, E1000_IMIR(i), imir);
E1000_WRITE_REG(hw, E1000_IMIREXT(i), imir_ext);
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
return 0;
}
/*
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
* igb_remove_5tuple_filter_82576 - remove a 5tuple filter
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
*
* @param
* dev: Pointer to struct rte_eth_dev.
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
* ntuple_filter: ponter to the filter that will be removed.
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
*
* @return
* - On success, zero.
* - On failure, a negative value.
*/
static int
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
igb_remove_5tuple_filter_82576(struct rte_eth_dev *dev,
struct rte_eth_ntuple_filter *ntuple_filter)
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
struct e1000_filter_info *filter_info =
E1000_DEV_PRIVATE_TO_FILTER_INFO(dev->data->dev_private);
struct e1000_5tuple_filter_info filter_5tuple;
struct e1000_5tuple_filter *filter;
int ret;
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
memset(&filter_5tuple, 0, sizeof(struct e1000_5tuple_filter_info));
ret = ntuple_filter_to_5tuple_82576(ntuple_filter,
&filter_5tuple);
if (ret < 0)
return ret;
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
filter = igb_5tuple_filter_lookup_82576(&filter_info->fivetuple_list,
&filter_5tuple);
if (filter == NULL) {
PMD_DRV_LOG(ERR, "filter doesn't exist.");
return -ENOENT;
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
}
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
filter_info->fivetuple_mask &= ~(1 << filter->index);
TAILQ_REMOVE(&filter_info->fivetuple_list, filter, entries);
rte_free(filter);
E1000_WRITE_REG(hw, E1000_FTQF(filter->index),
E1000_FTQF_VF_BP | E1000_FTQF_MASK);
E1000_WRITE_REG(hw, E1000_DAQF(filter->index), 0);
E1000_WRITE_REG(hw, E1000_SAQF(filter->index), 0);
E1000_WRITE_REG(hw, E1000_SPQF(filter->index), 0);
E1000_WRITE_REG(hw, E1000_IMIR(filter->index), 0);
E1000_WRITE_REG(hw, E1000_IMIREXT(filter->index), 0);
return 0;
igb: add filters This patch adds following igb NIC filters implement: syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350 syn filter, ethertype filter, 5tuple filter for intel NIC 82576 Signed-off-by: jingjing.wu <jingjing.wu@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-16 07:31:44 +00:00
}
ethdev: MTU accessors This patch adds two new functions in ethdev api to retrieve current MTU and change MTU of a port. Only .mtu_set function is pmd specific. pmd should update its max_rx_pkt_len if needed. This operation has been implemented for rte_em_pmd, rte_igb_pmd and rte_ixgbe_pmd. Signed-off-by: Samuel Gauthier <samuel.gauthier@6wind.com> Signed-off-by: Ivan Boule <ivan.boule@6wind.com> Signed-off-by: David Marchand <david.marchand@6wind.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2014-06-17 18:09:30 +00:00
static int
eth_igb_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
{
uint32_t rctl;
struct e1000_hw *hw;
struct rte_eth_dev_info dev_info;
uint32_t frame_size = mtu + (ETHER_HDR_LEN + ETHER_CRC_LEN +
VLAN_TAG_SIZE);
hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
#ifdef RTE_LIBRTE_82571_SUPPORT
/* XXX: not bigger than max_rx_pktlen */
if (hw->mac.type == e1000_82571)
return -ENOTSUP;
#endif
eth_igb_infos_get(dev, &dev_info);
/* check that mtu is within the allowed range */
if ((mtu < ETHER_MIN_MTU) ||
(frame_size > dev_info.max_rx_pktlen))
return -EINVAL;
/* refuse mtu that requires the support of scattered packets when this
* feature has not been enabled before. */
if (!dev->data->scattered_rx &&
frame_size > dev->data->min_rx_buf_size - RTE_PKTMBUF_HEADROOM)
return -EINVAL;
rctl = E1000_READ_REG(hw, E1000_RCTL);
/* switch to jumbo mode if needed */
if (frame_size > ETHER_MAX_LEN) {
dev->data->dev_conf.rxmode.jumbo_frame = 1;
rctl |= E1000_RCTL_LPE;
} else {
dev->data->dev_conf.rxmode.jumbo_frame = 0;
rctl &= ~E1000_RCTL_LPE;
}
E1000_WRITE_REG(hw, E1000_RCTL, rctl);
/* update max frame size */
dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
E1000_WRITE_REG(hw, E1000_RLPML,
dev->data->dev_conf.rxmode.max_rx_pkt_len);
return 0;
}
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
/*
* igb_add_del_ntuple_filter - add or delete a ntuple filter
*
* @param
* dev: Pointer to struct rte_eth_dev.
* ntuple_filter: Pointer to struct rte_eth_ntuple_filter
* add: if true, add filter, if false, remove filter
*
* @return
* - On success, zero.
* - On failure, a negative value.
*/
static int
igb_add_del_ntuple_filter(struct rte_eth_dev *dev,
struct rte_eth_ntuple_filter *ntuple_filter,
bool add)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
int ret;
switch (ntuple_filter->flags) {
case RTE_5TUPLE_FLAGS:
case (RTE_5TUPLE_FLAGS | RTE_NTUPLE_FLAGS_TCP_FLAG):
if (hw->mac.type != e1000_82576)
return -ENOTSUP;
if (add)
ret = igb_add_5tuple_filter_82576(dev,
ntuple_filter);
else
ret = igb_remove_5tuple_filter_82576(dev,
ntuple_filter);
break;
case RTE_2TUPLE_FLAGS:
case (RTE_2TUPLE_FLAGS | RTE_NTUPLE_FLAGS_TCP_FLAG):
if (hw->mac.type != e1000_82580 && hw->mac.type != e1000_i350)
return -ENOTSUP;
if (add)
ret = igb_add_2tuple_filter(dev, ntuple_filter);
else
ret = igb_remove_2tuple_filter(dev, ntuple_filter);
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
/*
* igb_get_ntuple_filter - get a ntuple filter
*
* @param
* dev: Pointer to struct rte_eth_dev.
* ntuple_filter: Pointer to struct rte_eth_ntuple_filter
*
* @return
* - On success, zero.
* - On failure, a negative value.
*/
static int
igb_get_ntuple_filter(struct rte_eth_dev *dev,
struct rte_eth_ntuple_filter *ntuple_filter)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct e1000_filter_info *filter_info =
E1000_DEV_PRIVATE_TO_FILTER_INFO(dev->data->dev_private);
struct e1000_5tuple_filter_info filter_5tuple;
struct e1000_2tuple_filter_info filter_2tuple;
struct e1000_5tuple_filter *p_5tuple_filter;
struct e1000_2tuple_filter *p_2tuple_filter;
int ret;
switch (ntuple_filter->flags) {
case RTE_5TUPLE_FLAGS:
case (RTE_5TUPLE_FLAGS | RTE_NTUPLE_FLAGS_TCP_FLAG):
if (hw->mac.type != e1000_82576)
return -ENOTSUP;
memset(&filter_5tuple,
0,
sizeof(struct e1000_5tuple_filter_info));
ret = ntuple_filter_to_5tuple_82576(ntuple_filter,
&filter_5tuple);
if (ret < 0)
return ret;
p_5tuple_filter = igb_5tuple_filter_lookup_82576(
&filter_info->fivetuple_list,
&filter_5tuple);
if (p_5tuple_filter == NULL) {
PMD_DRV_LOG(ERR, "filter doesn't exist.");
return -ENOENT;
}
ntuple_filter->queue = p_5tuple_filter->queue;
break;
case RTE_2TUPLE_FLAGS:
case (RTE_2TUPLE_FLAGS | RTE_NTUPLE_FLAGS_TCP_FLAG):
if (hw->mac.type != e1000_82580 && hw->mac.type != e1000_i350)
return -ENOTSUP;
memset(&filter_2tuple,
0,
sizeof(struct e1000_2tuple_filter_info));
ret = ntuple_filter_to_2tuple(ntuple_filter, &filter_2tuple);
if (ret < 0)
return ret;
p_2tuple_filter = igb_2tuple_filter_lookup(
&filter_info->twotuple_list,
&filter_2tuple);
if (p_2tuple_filter == NULL) {
PMD_DRV_LOG(ERR, "filter doesn't exist.");
return -ENOENT;
}
ntuple_filter->queue = p_2tuple_filter->queue;
break;
default:
ret = -EINVAL;
break;
}
return 0;
}
/*
* igb_ntuple_filter_handle - Handle operations for ntuple filter.
* @dev: pointer to rte_eth_dev structure
* @filter_op:operation will be taken.
* @arg: a pointer to specific structure corresponding to the filter_op
*/
static int
igb_ntuple_filter_handle(struct rte_eth_dev *dev,
enum rte_filter_op filter_op,
void *arg)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
int ret;
MAC_TYPE_FILTER_SUP(hw->mac.type);
if (filter_op == RTE_ETH_FILTER_NOP)
return 0;
if (arg == NULL) {
PMD_DRV_LOG(ERR, "arg shouldn't be NULL for operation %u.",
filter_op);
return -EINVAL;
}
switch (filter_op) {
case RTE_ETH_FILTER_ADD:
ret = igb_add_del_ntuple_filter(dev,
(struct rte_eth_ntuple_filter *)arg,
TRUE);
break;
case RTE_ETH_FILTER_DELETE:
ret = igb_add_del_ntuple_filter(dev,
(struct rte_eth_ntuple_filter *)arg,
FALSE);
break;
case RTE_ETH_FILTER_GET:
ret = igb_get_ntuple_filter(dev,
(struct rte_eth_ntuple_filter *)arg);
break;
default:
PMD_DRV_LOG(ERR, "unsupported operation %u.", filter_op);
ret = -EINVAL;
break;
}
return ret;
}
igb: use generic filter control for ethertype filter This patch removes old functions which deal with ethertype filter in igb driver. It also defines eth_igb_filter_ctrl which is binding to filter_ctrl API, and ethertype filter can be dealt with through this new entrance. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-01-12 07:16:11 +00:00
static inline int
igb_ethertype_filter_lookup(struct e1000_filter_info *filter_info,
uint16_t ethertype)
{
int i;
for (i = 0; i < E1000_MAX_ETQF_FILTERS; i++) {
if (filter_info->ethertype_filters[i] == ethertype &&
(filter_info->ethertype_mask & (1 << i)))
return i;
}
return -1;
}
static inline int
igb_ethertype_filter_insert(struct e1000_filter_info *filter_info,
uint16_t ethertype)
{
int i;
for (i = 0; i < E1000_MAX_ETQF_FILTERS; i++) {
if (!(filter_info->ethertype_mask & (1 << i))) {
filter_info->ethertype_mask |= 1 << i;
filter_info->ethertype_filters[i] = ethertype;
return i;
}
}
return -1;
}
static inline int
igb_ethertype_filter_remove(struct e1000_filter_info *filter_info,
uint8_t idx)
{
if (idx >= E1000_MAX_ETQF_FILTERS)
return -1;
filter_info->ethertype_mask &= ~(1 << idx);
filter_info->ethertype_filters[idx] = 0;
return idx;
}
static int
igb_add_del_ethertype_filter(struct rte_eth_dev *dev,
struct rte_eth_ethertype_filter *filter,
bool add)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct e1000_filter_info *filter_info =
E1000_DEV_PRIVATE_TO_FILTER_INFO(dev->data->dev_private);
uint32_t etqf = 0;
int ret;
if (filter->ether_type == ETHER_TYPE_IPv4 ||
filter->ether_type == ETHER_TYPE_IPv6) {
PMD_DRV_LOG(ERR, "unsupported ether_type(0x%04x) in"
" ethertype filter.", filter->ether_type);
return -EINVAL;
}
if (filter->flags & RTE_ETHTYPE_FLAGS_MAC) {
PMD_DRV_LOG(ERR, "mac compare is unsupported.");
return -EINVAL;
}
if (filter->flags & RTE_ETHTYPE_FLAGS_DROP) {
PMD_DRV_LOG(ERR, "drop option is unsupported.");
return -EINVAL;
}
ret = igb_ethertype_filter_lookup(filter_info, filter->ether_type);
if (ret >= 0 && add) {
PMD_DRV_LOG(ERR, "ethertype (0x%04x) filter exists.",
filter->ether_type);
return -EEXIST;
}
if (ret < 0 && !add) {
PMD_DRV_LOG(ERR, "ethertype (0x%04x) filter doesn't exist.",
filter->ether_type);
return -ENOENT;
}
if (add) {
ret = igb_ethertype_filter_insert(filter_info,
filter->ether_type);
if (ret < 0) {
PMD_DRV_LOG(ERR, "ethertype filters are full.");
return -ENOSYS;
}
etqf |= E1000_ETQF_FILTER_ENABLE | E1000_ETQF_QUEUE_ENABLE;
etqf |= (uint32_t)(filter->ether_type & E1000_ETQF_ETHERTYPE);
etqf |= filter->queue << E1000_ETQF_QUEUE_SHIFT;
} else {
ret = igb_ethertype_filter_remove(filter_info, (uint8_t)ret);
if (ret < 0)
return -ENOSYS;
}
E1000_WRITE_REG(hw, E1000_ETQF(ret), etqf);
E1000_WRITE_FLUSH(hw);
return 0;
}
static int
igb_get_ethertype_filter(struct rte_eth_dev *dev,
struct rte_eth_ethertype_filter *filter)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct e1000_filter_info *filter_info =
E1000_DEV_PRIVATE_TO_FILTER_INFO(dev->data->dev_private);
uint32_t etqf;
int ret;
ret = igb_ethertype_filter_lookup(filter_info, filter->ether_type);
if (ret < 0) {
PMD_DRV_LOG(ERR, "ethertype (0x%04x) filter doesn't exist.",
filter->ether_type);
return -ENOENT;
}
etqf = E1000_READ_REG(hw, E1000_ETQF(ret));
if (etqf & E1000_ETQF_FILTER_ENABLE) {
filter->ether_type = etqf & E1000_ETQF_ETHERTYPE;
filter->flags = 0;
filter->queue = (etqf & E1000_ETQF_QUEUE) >>
E1000_ETQF_QUEUE_SHIFT;
return 0;
}
return -ENOENT;
}
/*
* igb_ethertype_filter_handle - Handle operations for ethertype filter.
* @dev: pointer to rte_eth_dev structure
* @filter_op:operation will be taken.
* @arg: a pointer to specific structure corresponding to the filter_op
*/
static int
igb_ethertype_filter_handle(struct rte_eth_dev *dev,
enum rte_filter_op filter_op,
void *arg)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
int ret;
MAC_TYPE_FILTER_SUP(hw->mac.type);
if (filter_op == RTE_ETH_FILTER_NOP)
return 0;
if (arg == NULL) {
PMD_DRV_LOG(ERR, "arg shouldn't be NULL for operation %u.",
filter_op);
return -EINVAL;
}
switch (filter_op) {
case RTE_ETH_FILTER_ADD:
ret = igb_add_del_ethertype_filter(dev,
(struct rte_eth_ethertype_filter *)arg,
TRUE);
break;
case RTE_ETH_FILTER_DELETE:
ret = igb_add_del_ethertype_filter(dev,
(struct rte_eth_ethertype_filter *)arg,
FALSE);
break;
case RTE_ETH_FILTER_GET:
ret = igb_get_ethertype_filter(dev,
(struct rte_eth_ethertype_filter *)arg);
break;
default:
PMD_DRV_LOG(ERR, "unsupported operation %u.", filter_op);
ret = -EINVAL;
break;
}
return ret;
}
static int
eth_igb_filter_ctrl(struct rte_eth_dev *dev,
enum rte_filter_type filter_type,
enum rte_filter_op filter_op,
void *arg)
{
int ret = -EINVAL;
switch (filter_type) {
igb: migrate ntuple filter to new API This patch defines new functions dealing with ntuple filters which is corresponding to 2tuple filter for 82580 and i350 in HW, and to 5tuple filter for 82576 in HW. It removes old functions which deal with 2tuple and 5tuple filters in igb driver. Ntuple filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-10 04:48:30 +00:00
case RTE_ETH_FILTER_NTUPLE:
ret = igb_ntuple_filter_handle(dev, filter_op, arg);
break;
igb: use generic filter control for ethertype filter This patch removes old functions which deal with ethertype filter in igb driver. It also defines eth_igb_filter_ctrl which is binding to filter_ctrl API, and ethertype filter can be dealt with through this new entrance. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-01-12 07:16:11 +00:00
case RTE_ETH_FILTER_ETHERTYPE:
ret = igb_ethertype_filter_handle(dev, filter_op, arg);
break;
igb: migrate syn filter to new API This patch defines new functions dealing with syn filter. It removes old functions of syn filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-11 07:51:47 +00:00
case RTE_ETH_FILTER_SYN:
ret = eth_igb_syn_filter_handle(dev, filter_op, arg);
break;
igb: migrate flex filter to new API This patch defines new functions dealing with flex filter. It removes old functions of flex filter in igb driver. Syn filter is dealt with through entrance eth_igb_filter_ctrl. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
2015-02-21 01:53:08 +00:00
case RTE_ETH_FILTER_FLEXIBLE:
ret = eth_igb_flex_filter_handle(dev, filter_op, arg);
break;
igb: use generic filter control for ethertype filter This patch removes old functions which deal with ethertype filter in igb driver. It also defines eth_igb_filter_ctrl which is binding to filter_ctrl API, and ethertype filter can be dealt with through this new entrance. Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-01-12 07:16:11 +00:00
default:
PMD_DRV_LOG(WARNING, "Filter type (%d) not supported",
filter_type);
break;
}
return ret;
}
e1000: add multicast MAC address filtering Support the PMD function "set_mc_addr_list" in the "igb", "igb-vf", and "em" Poll Mode Drivers. Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
2015-05-28 15:05:21 +00:00
static int
eth_igb_set_mc_addr_list(struct rte_eth_dev *dev,
struct ether_addr *mc_addr_set,
uint32_t nb_mc_addr)
{
struct e1000_hw *hw;
hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
e1000_update_mc_addr_list(hw, (u8 *)mc_addr_set, nb_mc_addr);
return 0;
}
igb: support ieee1588 functions for device time Add additional functions to support the existing IEEE1588 functionality and to enable getting, setting and adjusting the device time. Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com> Reviewed-by: John McNamara <john.mcnamara@intel.com>
2015-11-13 16:09:10 +00:00
static uint64_t
igb_read_systime_cyclecounter(struct rte_eth_dev *dev)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
uint64_t systime_cycles;
switch (hw->mac.type) {
case e1000_i210:
case e1000_i211:
/*
* Need to read System Time Residue Register to be able
* to read the other two registers.
*/
E1000_READ_REG(hw, E1000_SYSTIMR);
/* SYSTIMEL stores ns and SYSTIMEH stores seconds. */
systime_cycles = (uint64_t)E1000_READ_REG(hw, E1000_SYSTIML);
systime_cycles += (uint64_t)E1000_READ_REG(hw, E1000_SYSTIMH)
* NSEC_PER_SEC;
break;
case e1000_82580:
case e1000_i350:
case e1000_i354:
/*
* Need to read System Time Residue Register to be able
* to read the other two registers.
*/
E1000_READ_REG(hw, E1000_SYSTIMR);
systime_cycles = (uint64_t)E1000_READ_REG(hw, E1000_SYSTIML);
/* Only the 8 LSB are valid. */
systime_cycles |= (uint64_t)(E1000_READ_REG(hw, E1000_SYSTIMH)
& 0xff) << 32;
break;
default:
systime_cycles = (uint64_t)E1000_READ_REG(hw, E1000_SYSTIML);
systime_cycles |= (uint64_t)E1000_READ_REG(hw, E1000_SYSTIMH)
<< 32;
break;
}
return systime_cycles;
}
static uint64_t
igb_read_rx_tstamp_cyclecounter(struct rte_eth_dev *dev)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
uint64_t rx_tstamp_cycles;
switch (hw->mac.type) {
case e1000_i210:
case e1000_i211:
/* RXSTMPL stores ns and RXSTMPH stores seconds. */
rx_tstamp_cycles = (uint64_t)E1000_READ_REG(hw, E1000_RXSTMPL);
rx_tstamp_cycles += (uint64_t)E1000_READ_REG(hw, E1000_RXSTMPH)
* NSEC_PER_SEC;
break;
case e1000_82580:
case e1000_i350:
case e1000_i354:
rx_tstamp_cycles = (uint64_t)E1000_READ_REG(hw, E1000_RXSTMPL);
/* Only the 8 LSB are valid. */
rx_tstamp_cycles |= (uint64_t)(E1000_READ_REG(hw, E1000_RXSTMPH)
& 0xff) << 32;
break;
default:
rx_tstamp_cycles = (uint64_t)E1000_READ_REG(hw, E1000_RXSTMPL);
rx_tstamp_cycles |= (uint64_t)E1000_READ_REG(hw, E1000_RXSTMPH)
<< 32;
break;
}
return rx_tstamp_cycles;
}
static uint64_t
igb_read_tx_tstamp_cyclecounter(struct rte_eth_dev *dev)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
uint64_t tx_tstamp_cycles;
switch (hw->mac.type) {
case e1000_i210:
case e1000_i211:
/* RXSTMPL stores ns and RXSTMPH stores seconds. */
tx_tstamp_cycles = (uint64_t)E1000_READ_REG(hw, E1000_TXSTMPL);
tx_tstamp_cycles += (uint64_t)E1000_READ_REG(hw, E1000_TXSTMPH)
* NSEC_PER_SEC;
break;
case e1000_82580:
case e1000_i350:
case e1000_i354:
tx_tstamp_cycles = (uint64_t)E1000_READ_REG(hw, E1000_TXSTMPL);
/* Only the 8 LSB are valid. */
tx_tstamp_cycles |= (uint64_t)(E1000_READ_REG(hw, E1000_TXSTMPH)
& 0xff) << 32;
break;
default:
tx_tstamp_cycles = (uint64_t)E1000_READ_REG(hw, E1000_TXSTMPL);
tx_tstamp_cycles |= (uint64_t)E1000_READ_REG(hw, E1000_TXSTMPH)
<< 32;
break;
}
return tx_tstamp_cycles;
}
static void
igb_start_timecounters(struct rte_eth_dev *dev)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct e1000_adapter *adapter =
(struct e1000_adapter *)dev->data->dev_private;
uint32_t incval = 1;
uint32_t shift = 0;
uint64_t mask = E1000_CYCLECOUNTER_MASK;
switch (hw->mac.type) {
case e1000_82580:
case e1000_i350:
case e1000_i354:
/* 32 LSB bits + 8 MSB bits = 40 bits */
mask = (1ULL << 40) - 1;
/* fall-through */
case e1000_i210:
case e1000_i211:
/*
* Start incrementing the register
* used to timestamp PTP packets.
*/
E1000_WRITE_REG(hw, E1000_TIMINCA, incval);
break;
case e1000_82576:
incval = E1000_INCVALUE_82576;
shift = IGB_82576_TSYNC_SHIFT;
E1000_WRITE_REG(hw, E1000_TIMINCA,
E1000_INCPERIOD_82576 | incval);
break;
default:
/* Not supported */
return;
}
memset(&adapter->systime_tc, 0, sizeof(struct rte_timecounter));
memset(&adapter->rx_tstamp_tc, 0, sizeof(struct rte_timecounter));
memset(&adapter->tx_tstamp_tc, 0, sizeof(struct rte_timecounter));
adapter->systime_tc.cc_mask = mask;
adapter->systime_tc.cc_shift = shift;
adapter->systime_tc.nsec_mask = (1ULL << shift) - 1;
adapter->rx_tstamp_tc.cc_mask = mask;
adapter->rx_tstamp_tc.cc_shift = shift;
adapter->rx_tstamp_tc.nsec_mask = (1ULL << shift) - 1;
adapter->tx_tstamp_tc.cc_mask = mask;
adapter->tx_tstamp_tc.cc_shift = shift;
adapter->tx_tstamp_tc.nsec_mask = (1ULL << shift) - 1;
}
static int
igb_timesync_adjust_time(struct rte_eth_dev *dev, int64_t delta)
{
struct e1000_adapter *adapter =
(struct e1000_adapter *)dev->data->dev_private;
adapter->systime_tc.nsec += delta;
adapter->rx_tstamp_tc.nsec += delta;
adapter->tx_tstamp_tc.nsec += delta;
return 0;
}
static int
igb_timesync_write_time(struct rte_eth_dev *dev, const struct timespec *ts)
{
uint64_t ns;
struct e1000_adapter *adapter =
(struct e1000_adapter *)dev->data->dev_private;
ns = rte_timespec_to_ns(ts);
/* Set the timecounters to a new value. */
adapter->systime_tc.nsec = ns;
adapter->rx_tstamp_tc.nsec = ns;
adapter->tx_tstamp_tc.nsec = ns;
return 0;
}
static int
igb_timesync_read_time(struct rte_eth_dev *dev, struct timespec *ts)
{
uint64_t ns, systime_cycles;
struct e1000_adapter *adapter =
(struct e1000_adapter *)dev->data->dev_private;
systime_cycles = igb_read_systime_cyclecounter(dev);
ns = rte_timecounter_update(&adapter->systime_tc, systime_cycles);
*ts = rte_ns_to_timespec(ns);
return 0;
}
e1000: add ieee1588 timestamping Add e1000/igb support for new ethdev APIs to enable and read IEEE1588 PTP timestamps. Signed-off-by: John McNamara <john.mcnamara@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2015-07-02 15:16:29 +00:00
static int
igb_timesync_enable(struct rte_eth_dev *dev)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
uint32_t tsync_ctl;
igb: fix ieee1588 timestamping Ieee1588 reads system time to set its timestamp. On 1G NICs, for example, i350, system time is disabled by default. It means the ieee1588 timestamp will always be 0. This patch enables system time when ieee1588 is enabled. Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: John McNamara <john.mcnamara@intel.com>
2015-07-31 01:20:30 +00:00
uint32_t tsauxc;
igb: support ieee1588 functions for device time Add additional functions to support the existing IEEE1588 functionality and to enable getting, setting and adjusting the device time. Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com> Reviewed-by: John McNamara <john.mcnamara@intel.com>
2015-11-13 16:09:10 +00:00
/* Stop the timesync system time. */
E1000_WRITE_REG(hw, E1000_TIMINCA, 0x0);
/* Reset the timesync system time value. */
switch (hw->mac.type) {
case e1000_82580:
case e1000_i350:
case e1000_i354:
case e1000_i210:
case e1000_i211:
E1000_WRITE_REG(hw, E1000_SYSTIMR, 0x0);
/* fall-through */
case e1000_82576:
E1000_WRITE_REG(hw, E1000_SYSTIML, 0x0);
E1000_WRITE_REG(hw, E1000_SYSTIMH, 0x0);
break;
default:
/* Not supported. */
return -ENOTSUP;
}
igb: fix ieee1588 timestamping Ieee1588 reads system time to set its timestamp. On 1G NICs, for example, i350, system time is disabled by default. It means the ieee1588 timestamp will always be 0. This patch enables system time when ieee1588 is enabled. Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: John McNamara <john.mcnamara@intel.com>
2015-07-31 01:20:30 +00:00
/* Enable system time for it isn't on by default. */
tsauxc = E1000_READ_REG(hw, E1000_TSAUXC);
tsauxc &= ~E1000_TSAUXC_DISABLE_SYSTIME;
E1000_WRITE_REG(hw, E1000_TSAUXC, tsauxc);
e1000: add ieee1588 timestamping Add e1000/igb support for new ethdev APIs to enable and read IEEE1588 PTP timestamps. Signed-off-by: John McNamara <john.mcnamara@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2015-07-02 15:16:29 +00:00
igb: support ieee1588 functions for device time Add additional functions to support the existing IEEE1588 functionality and to enable getting, setting and adjusting the device time. Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com> Reviewed-by: John McNamara <john.mcnamara@intel.com>
2015-11-13 16:09:10 +00:00
igb_start_timecounters(dev);
e1000: add ieee1588 timestamping Add e1000/igb support for new ethdev APIs to enable and read IEEE1588 PTP timestamps. Signed-off-by: John McNamara <john.mcnamara@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2015-07-02 15:16:29 +00:00
/* Enable L2 filtering of IEEE1588/802.1AS Ethernet frame types. */
E1000_WRITE_REG(hw, E1000_ETQF(E1000_ETQF_FILTER_1588),
(ETHER_TYPE_1588 |
E1000_ETQF_FILTER_ENABLE |
E1000_ETQF_1588));
/* Enable timestamping of received PTP packets. */
tsync_ctl = E1000_READ_REG(hw, E1000_TSYNCRXCTL);
tsync_ctl |= E1000_TSYNCRXCTL_ENABLED;
E1000_WRITE_REG(hw, E1000_TSYNCRXCTL, tsync_ctl);
/* Enable Timestamping of transmitted PTP packets. */
tsync_ctl = E1000_READ_REG(hw, E1000_TSYNCTXCTL);
tsync_ctl |= E1000_TSYNCTXCTL_ENABLED;
E1000_WRITE_REG(hw, E1000_TSYNCTXCTL, tsync_ctl);
return 0;
}
static int
igb_timesync_disable(struct rte_eth_dev *dev)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
uint32_t tsync_ctl;
/* Disable timestamping of transmitted PTP packets. */
tsync_ctl = E1000_READ_REG(hw, E1000_TSYNCTXCTL);
tsync_ctl &= ~E1000_TSYNCTXCTL_ENABLED;
E1000_WRITE_REG(hw, E1000_TSYNCTXCTL, tsync_ctl);
/* Disable timestamping of received PTP packets. */
tsync_ctl = E1000_READ_REG(hw, E1000_TSYNCRXCTL);
tsync_ctl &= ~E1000_TSYNCRXCTL_ENABLED;
E1000_WRITE_REG(hw, E1000_TSYNCRXCTL, tsync_ctl);
/* Disable L2 filtering of IEEE1588/802.1AS Ethernet frame types. */
E1000_WRITE_REG(hw, E1000_ETQF(E1000_ETQF_FILTER_1588), 0);
/* Stop incrementating the System Time registers. */
E1000_WRITE_REG(hw, E1000_TIMINCA, 0);
return 0;
}
static int
igb_timesync_read_rx_timestamp(struct rte_eth_dev *dev,
struct timespec *timestamp,
uint32_t flags __rte_unused)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
igb: support ieee1588 functions for device time Add additional functions to support the existing IEEE1588 functionality and to enable getting, setting and adjusting the device time. Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com> Reviewed-by: John McNamara <john.mcnamara@intel.com>
2015-11-13 16:09:10 +00:00
struct e1000_adapter *adapter =
(struct e1000_adapter *)dev->data->dev_private;
e1000: add ieee1588 timestamping Add e1000/igb support for new ethdev APIs to enable and read IEEE1588 PTP timestamps. Signed-off-by: John McNamara <john.mcnamara@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2015-07-02 15:16:29 +00:00
uint32_t tsync_rxctl;
igb: support ieee1588 functions for device time Add additional functions to support the existing IEEE1588 functionality and to enable getting, setting and adjusting the device time. Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com> Reviewed-by: John McNamara <john.mcnamara@intel.com>
2015-11-13 16:09:10 +00:00
uint64_t rx_tstamp_cycles;
uint64_t ns;
e1000: add ieee1588 timestamping Add e1000/igb support for new ethdev APIs to enable and read IEEE1588 PTP timestamps. Signed-off-by: John McNamara <john.mcnamara@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2015-07-02 15:16:29 +00:00
tsync_rxctl = E1000_READ_REG(hw, E1000_TSYNCRXCTL);
if ((tsync_rxctl & E1000_TSYNCRXCTL_VALID) == 0)
return -EINVAL;
igb: support ieee1588 functions for device time Add additional functions to support the existing IEEE1588 functionality and to enable getting, setting and adjusting the device time. Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com> Reviewed-by: John McNamara <john.mcnamara@intel.com>
2015-11-13 16:09:10 +00:00
rx_tstamp_cycles = igb_read_rx_tstamp_cyclecounter(dev);
ns = rte_timecounter_update(&adapter->rx_tstamp_tc, rx_tstamp_cycles);
*timestamp = rte_ns_to_timespec(ns);
e1000: add ieee1588 timestamping Add e1000/igb support for new ethdev APIs to enable and read IEEE1588 PTP timestamps. Signed-off-by: John McNamara <john.mcnamara@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2015-07-02 15:16:29 +00:00
return 0;
}
static int
igb_timesync_read_tx_timestamp(struct rte_eth_dev *dev,
struct timespec *timestamp)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
igb: support ieee1588 functions for device time Add additional functions to support the existing IEEE1588 functionality and to enable getting, setting and adjusting the device time. Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com> Reviewed-by: John McNamara <john.mcnamara@intel.com>
2015-11-13 16:09:10 +00:00
struct e1000_adapter *adapter =
(struct e1000_adapter *)dev->data->dev_private;
e1000: add ieee1588 timestamping Add e1000/igb support for new ethdev APIs to enable and read IEEE1588 PTP timestamps. Signed-off-by: John McNamara <john.mcnamara@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2015-07-02 15:16:29 +00:00
uint32_t tsync_txctl;
igb: support ieee1588 functions for device time Add additional functions to support the existing IEEE1588 functionality and to enable getting, setting and adjusting the device time. Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com> Reviewed-by: John McNamara <john.mcnamara@intel.com>
2015-11-13 16:09:10 +00:00
uint64_t tx_tstamp_cycles;
uint64_t ns;
e1000: add ieee1588 timestamping Add e1000/igb support for new ethdev APIs to enable and read IEEE1588 PTP timestamps. Signed-off-by: John McNamara <john.mcnamara@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2015-07-02 15:16:29 +00:00
tsync_txctl = E1000_READ_REG(hw, E1000_TSYNCTXCTL);
if ((tsync_txctl & E1000_TSYNCTXCTL_VALID) == 0)
return -EINVAL;
igb: support ieee1588 functions for device time Add additional functions to support the existing IEEE1588 functionality and to enable getting, setting and adjusting the device time. Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com> Reviewed-by: John McNamara <john.mcnamara@intel.com>
2015-11-13 16:09:10 +00:00
tx_tstamp_cycles = igb_read_tx_tstamp_cyclecounter(dev);
ns = rte_timecounter_update(&adapter->tx_tstamp_tc, tx_tstamp_cycles);
*timestamp = rte_ns_to_timespec(ns);
e1000: add ieee1588 timestamping Add e1000/igb support for new ethdev APIs to enable and read IEEE1588 PTP timestamps. Signed-off-by: John McNamara <john.mcnamara@intel.com> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2015-07-02 15:16:29 +00:00
return 0;
}
igb: add access to specific device info add function to support ethtool ops: - get_reg_length - get_regs - get_eeprom_length - get_eeprom - set_eeprom Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com> Acked-by: Andrew Harvey <agh@cisco.com> Acked-by: David Harton <dharton@cisco.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-07-16 13:25:36 +00:00
static int
eth_igb_get_reg_length(struct rte_eth_dev *dev __rte_unused)
{
int count = 0;
int g_ind = 0;
const struct reg_info *reg_group;
while ((reg_group = igb_regs[g_ind++]))
count += igb_reg_group_count(reg_group);
return count;
}
static int
igbvf_get_reg_length(struct rte_eth_dev *dev __rte_unused)
{
int count = 0;
int g_ind = 0;
const struct reg_info *reg_group;
while ((reg_group = igbvf_regs[g_ind++]))
count += igb_reg_group_count(reg_group);
return count;
}
static int
eth_igb_get_regs(struct rte_eth_dev *dev,
struct rte_dev_reg_info *regs)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
uint32_t *data = regs->data;
int g_ind = 0;
int count = 0;
const struct reg_info *reg_group;
ethdev: get registers width The ethtool app was allocating too little space for 64-bit registers which resulted in memory corruption. Removes hard-coded assumption that device registers are always 32 bits wide. The rte_eth_dev_get_reg_length and rte_eth_dev_get_reg_info callbacks did not provide register size to the app in any way while is needed to allocate correct number of bytes before retrieving registers using rte_eth_dev_get_reg. This commit changes rte_eth_dev_get_reg_info so that it can be used to retrieve both the number of registers and their width, and removes the now-redundant rte_eth_dev_get_reg_length. Signed-off-by: Zyta Szpak <zyta.szpak@semihalf.com> Acked-by: Remy Horton <remy.horton@intel.com>
2016-07-04 11:36:46 +00:00
if (data == NULL) {
regs->length = eth_igb_get_reg_length(dev);
regs->width = sizeof(uint32_t);
return 0;
}
igb: add access to specific device info add function to support ethtool ops: - get_reg_length - get_regs - get_eeprom_length - get_eeprom - set_eeprom Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com> Acked-by: Andrew Harvey <agh@cisco.com> Acked-by: David Harton <dharton@cisco.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-07-16 13:25:36 +00:00
/* Support only full register dump */
if ((regs->length == 0) ||
(regs->length == (uint32_t)eth_igb_get_reg_length(dev))) {
regs->version = hw->mac.type << 24 | hw->revision_id << 16 |
hw->device_id;
while ((reg_group = igb_regs[g_ind++]))
count += igb_read_regs_group(dev, &data[count],
reg_group);
return 0;
}
return -ENOTSUP;
}
static int
igbvf_get_regs(struct rte_eth_dev *dev,
struct rte_dev_reg_info *regs)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
uint32_t *data = regs->data;
int g_ind = 0;
int count = 0;
const struct reg_info *reg_group;
ethdev: get registers width The ethtool app was allocating too little space for 64-bit registers which resulted in memory corruption. Removes hard-coded assumption that device registers are always 32 bits wide. The rte_eth_dev_get_reg_length and rte_eth_dev_get_reg_info callbacks did not provide register size to the app in any way while is needed to allocate correct number of bytes before retrieving registers using rte_eth_dev_get_reg. This commit changes rte_eth_dev_get_reg_info so that it can be used to retrieve both the number of registers and their width, and removes the now-redundant rte_eth_dev_get_reg_length. Signed-off-by: Zyta Szpak <zyta.szpak@semihalf.com> Acked-by: Remy Horton <remy.horton@intel.com>
2016-07-04 11:36:46 +00:00
if (data == NULL) {
regs->length = igbvf_get_reg_length(dev);
regs->width = sizeof(uint32_t);
return 0;
}
igb: add access to specific device info add function to support ethtool ops: - get_reg_length - get_regs - get_eeprom_length - get_eeprom - set_eeprom Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com> Acked-by: Andrew Harvey <agh@cisco.com> Acked-by: David Harton <dharton@cisco.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-07-16 13:25:36 +00:00
/* Support only full register dump */
if ((regs->length == 0) ||
(regs->length == (uint32_t)igbvf_get_reg_length(dev))) {
regs->version = hw->mac.type << 24 | hw->revision_id << 16 |
hw->device_id;
while ((reg_group = igbvf_regs[g_ind++]))
count += igb_read_regs_group(dev, &data[count],
reg_group);
return 0;
}
return -ENOTSUP;
}
static int
eth_igb_get_eeprom_length(struct rte_eth_dev *dev)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
/* Return unit is byte count */
return hw->nvm.word_size * 2;
}
static int
eth_igb_get_eeprom(struct rte_eth_dev *dev,
struct rte_dev_eeprom_info *in_eeprom)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct e1000_nvm_info *nvm = &hw->nvm;
uint16_t *data = in_eeprom->data;
int first, length;
first = in_eeprom->offset >> 1;
length = in_eeprom->length >> 1;
if ((first >= hw->nvm.word_size) ||
((first + length) >= hw->nvm.word_size))
return -EINVAL;
in_eeprom->magic = hw->vendor_id |
((uint32_t)hw->device_id << 16);
if ((nvm->ops.read) == NULL)
return -ENOTSUP;
return nvm->ops.read(hw, first, length, data);
}
static int
eth_igb_set_eeprom(struct rte_eth_dev *dev,
struct rte_dev_eeprom_info *in_eeprom)
{
struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct e1000_nvm_info *nvm = &hw->nvm;
uint16_t *data = in_eeprom->data;
int first, length;
first = in_eeprom->offset >> 1;
length = in_eeprom->length >> 1;
if ((first >= hw->nvm.word_size) ||
((first + length) >= hw->nvm.word_size))
return -EINVAL;
in_eeprom->magic = (uint32_t)hw->vendor_id |
((uint32_t)hw->device_id << 16);
if ((nvm->ops.write) == NULL)
return -ENOTSUP;
return nvm->ops.write(hw, first, length, data);
}
igb: enable Rx queue interrupts for PF The patch does below for igb PF: - Setup NIC to generate MSI-X interrupts - Set the IVAR register to map interrupt causes to vectors - Implement interrupt enable/disable functions Signed-off-by: Danny Zhou <danny.zhou@intel.com> Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-07-20 03:02:28 +00:00
static int
eth_igb_rx_queue_intr_disable(struct rte_eth_dev *dev, uint16_t queue_id)
{
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
uint32_t mask = 1 << queue_id;
E1000_WRITE_REG(hw, E1000_EIMC, mask);
E1000_WRITE_FLUSH(hw);
return 0;
}
static int
eth_igb_rx_queue_intr_enable(struct rte_eth_dev *dev, uint16_t queue_id)
{
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
net/e1000: localize mapping of ethdev to PCI device Create one macro for where PCI device information is extracted from ethernet device. Makes later changes easier to review, and test. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jan Blunck <jblunck@infradead.org>
2016-12-23 15:57:56 +00:00
struct rte_pci_device *pci_dev = E1000_DEV_TO_PCI(dev);
struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
igb: enable Rx queue interrupts for PF The patch does below for igb PF: - Setup NIC to generate MSI-X interrupts - Set the IVAR register to map interrupt causes to vectors - Implement interrupt enable/disable functions Signed-off-by: Danny Zhou <danny.zhou@intel.com> Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-07-20 03:02:28 +00:00
uint32_t mask = 1 << queue_id;
uint32_t regval;
regval = E1000_READ_REG(hw, E1000_EIMS);
E1000_WRITE_REG(hw, E1000_EIMS, regval | mask);
E1000_WRITE_FLUSH(hw);
net/e1000: localize mapping of ethdev to PCI device Create one macro for where PCI device information is extracted from ethernet device. Makes later changes easier to review, and test. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jan Blunck <jblunck@infradead.org>
2016-12-23 15:57:56 +00:00
rte_intr_enable(intr_handle);
igb: enable Rx queue interrupts for PF The patch does below for igb PF: - Setup NIC to generate MSI-X interrupts - Set the IVAR register to map interrupt causes to vectors - Implement interrupt enable/disable functions Signed-off-by: Danny Zhou <danny.zhou@intel.com> Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-07-20 03:02:28 +00:00
return 0;
}
static void
eth_igb_write_ivar(struct e1000_hw *hw, uint8_t msix_vector,
uint8_t index, uint8_t offset)
{
uint32_t val = E1000_READ_REG_ARRAY(hw, E1000_IVAR0, index);
/* clear bits */
val &= ~((uint32_t)0xFF << offset);
/* write vector and valid bit */
val |= (msix_vector | E1000_IVAR_VALID) << offset;
E1000_WRITE_REG_ARRAY(hw, E1000_IVAR0, index, val);
}
static void
eth_igb_assign_msix_vector(struct e1000_hw *hw, int8_t direction,
uint8_t queue, uint8_t msix_vector)
{
uint32_t tmp = 0;
if (hw->mac.type == e1000_82575) {
if (direction == 0)
tmp = E1000_EICR_RX_QUEUE0 << queue;
else if (direction == 1)
tmp = E1000_EICR_TX_QUEUE0 << queue;
E1000_WRITE_REG(hw, E1000_MSIXBM(msix_vector), tmp);
} else if (hw->mac.type == e1000_82576) {
if ((direction == 0) || (direction == 1))
eth_igb_write_ivar(hw, msix_vector, queue & 0x7,
((queue & 0x8) << 1) +
8 * direction);
} else if ((hw->mac.type == e1000_82580) ||
(hw->mac.type == e1000_i350) ||
(hw->mac.type == e1000_i354) ||
(hw->mac.type == e1000_i210) ||
(hw->mac.type == e1000_i211)) {
if ((direction == 0) || (direction == 1))
eth_igb_write_ivar(hw, msix_vector,
queue >> 1,
((queue & 0x1) << 4) +
8 * direction);
}
}
/* Sets up the hardware to generate MSI-X interrupts properly
* @hw
* board private structure
*/
static void
eth_igb_configure_msix_intr(struct rte_eth_dev *dev)
{
int queue_id;
uint32_t tmpval, regval, intr_mask;
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
igb: reserve VFIO vector zero for misc interrupt According to the VFIO interrupt mapping, the interrupt vector id for rxq starts from RX_VEC_START. It doesn't impact the UIO cases. Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-11-04 08:45:30 +00:00
uint32_t vec = E1000_MISC_VEC_ID;
uint32_t base = E1000_MISC_VEC_ID;
uint32_t misc_shift = 0;
net/e1000: localize mapping of ethdev to PCI device Create one macro for where PCI device information is extracted from ethernet device. Makes later changes easier to review, and test. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jan Blunck <jblunck@infradead.org>
2016-12-23 15:57:56 +00:00
struct rte_pci_device *pci_dev = E1000_DEV_TO_PCI(dev);
struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
igb: enable Rx queue interrupts for PF The patch does below for igb PF: - Setup NIC to generate MSI-X interrupts - Set the IVAR register to map interrupt causes to vectors - Implement interrupt enable/disable functions Signed-off-by: Danny Zhou <danny.zhou@intel.com> Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-07-20 03:02:28 +00:00
/* won't configure msix register if no mapping is done
* between intr vector and event fd
*/
if (!rte_intr_dp_is_en(intr_handle))
return;
igb: reserve VFIO vector zero for misc interrupt According to the VFIO interrupt mapping, the interrupt vector id for rxq starts from RX_VEC_START. It doesn't impact the UIO cases. Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-11-04 08:45:30 +00:00
if (rte_intr_allow_others(intr_handle)) {
vec = base = E1000_RX_VEC_START;
misc_shift = 1;
}
igb: enable Rx queue interrupts for PF The patch does below for igb PF: - Setup NIC to generate MSI-X interrupts - Set the IVAR register to map interrupt causes to vectors - Implement interrupt enable/disable functions Signed-off-by: Danny Zhou <danny.zhou@intel.com> Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-07-20 03:02:28 +00:00
/* set interrupt vector for other causes */
if (hw->mac.type == e1000_82575) {
tmpval = E1000_READ_REG(hw, E1000_CTRL_EXT);
/* enable MSI-X PBA support */
tmpval |= E1000_CTRL_EXT_PBA_CLR;
/* Auto-Mask interrupts upon ICR read */
tmpval |= E1000_CTRL_EXT_EIAME;
tmpval |= E1000_CTRL_EXT_IRCA;
E1000_WRITE_REG(hw, E1000_CTRL_EXT, tmpval);
/* enable msix_other interrupt */
E1000_WRITE_REG_ARRAY(hw, E1000_MSIXBM(0), 0, E1000_EIMS_OTHER);
regval = E1000_READ_REG(hw, E1000_EIAC);
E1000_WRITE_REG(hw, E1000_EIAC, regval | E1000_EIMS_OTHER);
regval = E1000_READ_REG(hw, E1000_EIAM);
E1000_WRITE_REG(hw, E1000_EIMS, regval | E1000_EIMS_OTHER);
} else if ((hw->mac.type == e1000_82576) ||
(hw->mac.type == e1000_82580) ||
(hw->mac.type == e1000_i350) ||
(hw->mac.type == e1000_i354) ||
(hw->mac.type == e1000_i210) ||
(hw->mac.type == e1000_i211)) {
/* turn on MSI-X capability first */
E1000_WRITE_REG(hw, E1000_GPIE, E1000_GPIE_MSIX_MODE |
E1000_GPIE_PBA | E1000_GPIE_EIAME |
E1000_GPIE_NSICR);
igb: reserve VFIO vector zero for misc interrupt According to the VFIO interrupt mapping, the interrupt vector id for rxq starts from RX_VEC_START. It doesn't impact the UIO cases. Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-11-04 08:45:30 +00:00
intr_mask = RTE_LEN2MASK(intr_handle->nb_efd, uint32_t) <<
misc_shift;
igb: enable Rx queue interrupts for PF The patch does below for igb PF: - Setup NIC to generate MSI-X interrupts - Set the IVAR register to map interrupt causes to vectors - Implement interrupt enable/disable functions Signed-off-by: Danny Zhou <danny.zhou@intel.com> Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-07-20 03:02:28 +00:00
regval = E1000_READ_REG(hw, E1000_EIAC);
E1000_WRITE_REG(hw, E1000_EIAC, regval | intr_mask);
/* enable msix_other interrupt */
regval = E1000_READ_REG(hw, E1000_EIMS);
E1000_WRITE_REG(hw, E1000_EIMS, regval | intr_mask);
tmpval = (dev->data->nb_rx_queues | E1000_IVAR_VALID) << 8;
E1000_WRITE_REG(hw, E1000_IVAR_MISC, tmpval);
}
/* use EIAM to auto-mask when MSI-X interrupt
* is asserted, this saves a register write for every interrupt
*/
igb: reserve VFIO vector zero for misc interrupt According to the VFIO interrupt mapping, the interrupt vector id for rxq starts from RX_VEC_START. It doesn't impact the UIO cases. Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-11-04 08:45:30 +00:00
intr_mask = RTE_LEN2MASK(intr_handle->nb_efd, uint32_t) <<
misc_shift;
igb: enable Rx queue interrupts for PF The patch does below for igb PF: - Setup NIC to generate MSI-X interrupts - Set the IVAR register to map interrupt causes to vectors - Implement interrupt enable/disable functions Signed-off-by: Danny Zhou <danny.zhou@intel.com> Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-07-20 03:02:28 +00:00
regval = E1000_READ_REG(hw, E1000_EIAM);
E1000_WRITE_REG(hw, E1000_EIAM, regval | intr_mask);
for (queue_id = 0; queue_id < dev->data->nb_rx_queues; queue_id++) {
eth_igb_assign_msix_vector(hw, 0, queue_id, vec);
intr_handle->intr_vec[queue_id] = vec;
igb: reserve VFIO vector zero for misc interrupt According to the VFIO interrupt mapping, the interrupt vector id for rxq starts from RX_VEC_START. It doesn't impact the UIO cases. Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-11-04 08:45:30 +00:00
if (vec < base + intr_handle->nb_efd - 1)
igb: enable Rx queue interrupts for PF The patch does below for igb PF: - Setup NIC to generate MSI-X interrupts - Set the IVAR register to map interrupt causes to vectors - Implement interrupt enable/disable functions Signed-off-by: Danny Zhou <danny.zhou@intel.com> Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-07-20 03:02:28 +00:00
vec++;
}
E1000_WRITE_FLUSH(hw);
}
drivers/net: do not use ethdev driver Signed-off-by: Jan Blunck <jblunck@infradead.org> Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org>
2017-04-11 15:44:24 +00:00
RTE_PMD_REGISTER_PCI(net_e1000_igb, rte_igb_pmd);
drivers: rename register macro prefix All macros related to driver registeration renamed from DRIVER_* to RTE_PMD_* This includes: DRIVER_REGISTER_PCI -> RTE_PMD_REGISTER_PCI DRIVER_REGISTER_PCI_TABLE -> RTE_PMD_REGISTER_PCI_TABLE DRIVER_REGISTER_VDEV -> RTE_PMD_REGISTER_VDEV DRIVER_REGISTER_PARAM_STRING -> RTE_PMD_REGISTER_PARAM_STRING DRIVER_EXPORT_* -> RTE_PMD_EXPORT_* Fix PMDINFOGEN tool to look for matches of RTE_PMD_REGISTER_*. Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2016-10-10 05:43:15 +00:00
RTE_PMD_REGISTER_PCI_TABLE(net_e1000_igb, pci_id_igb_map);
drivers: advertise kmod dependencies in pmdinfo Add a new macro RTE_PMD_REGISTER_KMOD_DEP() that allows a driver to declare the list of kernel modules required to run properly. Today, most PCI drivers require uio/vfio. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Fiona Trahe <fiona.trahe@intel.com> Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
2016-12-15 13:46:39 +00:00
RTE_PMD_REGISTER_KMOD_DEP(net_e1000_igb, "* igb_uio | uio_pci_generic | vfio");
drivers/net: do not use ethdev driver Signed-off-by: Jan Blunck <jblunck@infradead.org> Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org>
2017-04-11 15:44:24 +00:00
RTE_PMD_REGISTER_PCI(net_e1000_igb_vf, rte_igbvf_pmd);
drivers: rename register macro prefix All macros related to driver registeration renamed from DRIVER_* to RTE_PMD_* This includes: DRIVER_REGISTER_PCI -> RTE_PMD_REGISTER_PCI DRIVER_REGISTER_PCI_TABLE -> RTE_PMD_REGISTER_PCI_TABLE DRIVER_REGISTER_VDEV -> RTE_PMD_REGISTER_VDEV DRIVER_REGISTER_PARAM_STRING -> RTE_PMD_REGISTER_PARAM_STRING DRIVER_EXPORT_* -> RTE_PMD_EXPORT_* Fix PMDINFOGEN tool to look for matches of RTE_PMD_REGISTER_*. Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2016-10-10 05:43:15 +00:00
RTE_PMD_REGISTER_PCI_TABLE(net_e1000_igb_vf, pci_id_igbvf_map);
drivers: advertise kmod dependencies in pmdinfo Add a new macro RTE_PMD_REGISTER_KMOD_DEP() that allows a driver to declare the list of kernel modules required to run properly. Today, most PCI drivers require uio/vfio. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Fiona Trahe <fiona.trahe@intel.com> Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
2016-12-15 13:46:39 +00:00
RTE_PMD_REGISTER_KMOD_DEP(net_e1000_igb_vf, "* igb_uio | vfio");
Reference in New Issue Copy Permalink