The ioat driver has been superseded by the ioat and idxd dmadev drivers,
and has been deprecated for some time, so remove it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Add support for changing miscellaneous CPRI settings.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for enabling or disablig TX for SERDES
configured in CPRI mode.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for switching from ethernet (eCPRI) to CPRI mode.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
AFU (Acceleration Function Unit) is part of FPGA and enumerated
by ifpga driver.
This driver implements common AFU device interfaces and exposes
them to application as standard raw device APIs.
Normally application can operate specified AFU as below,
1. call rte_rawdev_pmd_get_named_dev() to find AFU device.
2. call rte_rawdev_configure() to initialize AFU device.
3. call rte_rawdev_selftest() to test AFU device.
Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
With DMA devices supported as a separate flavor of devices,
the DPAA2 QDMA driver is moved in the DMA devices.
This change removes the DPAA2 QDMA driver from raw devices.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Add PMD parameter that allows one to select only subset of available
GPIOs.
This might be useful in cases where some GPIOs are already reserved yet
still available for userspace access but particular app should not touch
them.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for custom interrupt handlers. Custom interrupt
handlers bypass kernel completely and are meant for fast
and low latency access to GPIO state.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Add initial support for PMD that allows to control particular pins form
userspace. Moreover PMD allows to attach custom interrupt handlers to
controllable GPIOs.
Main users of this PMD are dataplain applications requiring fast and low
latency access to pin state.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Device naming might be misleading which is especially true if one takes
it from lspci output. In order to keep naming consistent keep leading
zero in front of pci bus number.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jakub Palider <jpalider@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Deprecate the rawdev IOAT driver as both IOAT and IDXD drivers have
moved to dmadev.
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Only build the rawdev IDXD/IOAT drivers if the dmadev drivers are not
present.
This change requires the dependencies to be reordered in
drivers/meson.build so that rawdev can use the "RTE_DMA_* build macros to
check for the presence of the equivalent dmadev driver.
A note is also added to the documentation to inform users of this change.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Removing the rawdev based octeontx2-ep driver as the dependent
common/octeontx2 will soon be going away. Moreover this driver is no
longer required as the net/octeontx_ep driver is sufficient.
Signed-off-by: Radha Mohan Chintakuntla <radhac@marvell.com>
Removing the rawdev based octeontx2-dma driver as the dependent
common/octeontx2 will be soon be going away. Also a new DMA driver will
be coming in this place once the rte_dmadev library is in.
Signed-off-by: Radha Mohan Chintakuntla <radhac@marvell.com>
Spell checked and corrected documentation.
If there are any errors, or I have changed something that wasn't an error
please reach out to me so I can update the dictionary.
Cc: stable@dpdk.org
Signed-off-by: Henry Nadeau <hnadeau@iol.unh.edu>
The prerequisite info is already present in the platform guide.
No need to repeat it in individual dev guides.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Add support for performing selftest.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Custom IRQ handlers may be registered/removed on demand.
Since registration and removal are related they are in the
same patch.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Allow user to retrieve baseband phy memory resources.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for interrupt initialization and cleanup. Internally
interrupt initialization performs low level setup that allows
custom interrupt handler registration later on.
Interrupt initialization and cleanup are related hence they
are in the same patch.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for performing selftest operation.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for enqueueing messages.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for reading number of available queues i.e number
of available logical macs (LMACs).
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add baseband PHY CGX/RPM skeleton driver which merely probes a matching
device. CGX/RPM are Ethernet MACs hardwired to baseband subsystem.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Rather than using a vdev with args, DPDK can scan and initialize the
devices automatically using a bus-type driver. This bus does not need to
worry about registering device drivers, rather it can initialize the
devices directly on probe.
The device instances (queues) to use are detected from /dev with the
additional info about them got from /sys.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
When using a full device instance via vfio, allow the user to specify a
maximum number of queues to configure rather than always using the max
number of supported queues.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Add fill operation enqueue support for IOAT and IDXD. The fill enqueue is
similar to the copy enqueue, but takes a 'pattern' rather than a source
address to transfer to the destination address. This patch also includes an
additional test case for the new operation type.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Devices managed by the idxd kernel driver must be configured for DPDK use
before it can be used by the ioat driver. This example script serves both
as a quick way to get the driver set up with a simple configuration, and as
the basis for users to modify it and create their own configuration
scripts.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
The Intel DSA devices can be exposed to userspace via kernel driver, so can
be used without having to bind them to vfio/uio. Therefore we add support
for using those kernel-configured devices as vdevs, taking as parameter the
individual HW work queue to be used by the vdev.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Add in the basic probe/remove skeleton code for DSA devices which are bound
directly to vfio or uio driver. The kernel module for supporting these uses
the "idxd" name, so that name is used as function and file prefix to avoid
conflict with existing "ioat" prefixed functions.
Since we are adding new files to the driver and there will be common
definitions shared between the various files, we create a new internal
header file ioat_private.h to hold common macros and function prototypes.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Rather than having the fence signalled via a flag on a descriptor - which
requires reading the docs to find out whether the flag needs to go on the
last descriptor before, or the first descriptor after the fence - we can
instead add a separate fence API call. This becomes unambiguous to use,
since the fence call explicitly comes between two other enqueue calls. It
also allows more freedom of implementation in the driver code.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Since the hardware supported by the ioat driver is capable of operations
other than just copies, we can rename the doorbell and completion-return
functions to not have "copies" in their names. These functions are not
copy-specific, and so would apply for other operations which may be added
later to the driver.
Also add a suitable warning using deprecation attribute for any code using
the old functions names.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Add a flag which controls whether rte_ioat_enqueue_copy and
rte_ioat_completed_copies function should process handle parameters. Not
doing so can improve the performance when handle parameters are not
necessary.
Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Add NTB device support (4th generation) for Intel Ice Lake platform.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Currently with the rawdev API there is no way to check that the structure
passed in via the dev_private pointer in the structure passed to configure
API is of the correct type - it's just checked that it is non-NULL. Adding
in the length of the expected structure provides a measure of typechecking,
and can also be used for ABI compatibility in future, since ABI changes
involving structs almost always involve a change in size.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Currently with the rawdev API there is no way to check that the structure
passed in via the dev_private pointer in the dev_info structure is of the
correct type - it's just checked that it is non-NULL. Adding in the length
of the expected structure provides a measure of typechecking, and can also
be used for ABI compatibility in future, since ABI changes involving
structs almost always involve a change in size.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
In prerequisites of ntb guide, the correct flag when loading igb_uio
module should be `wc_activate=1`, not `wc_active=1`.
Fixes: 11b5c7daf0 ("raw/ntb: add enqueue and dequeue functions")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add rawdev's selftest feature in SDP VF driver, which
verifies the EP mode functionality test.
Signed-off-by: Mahipal Challa <mchalla@marvell.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Register "dev_configure" API to configure/initialize the SDP
VF PCIe devices.
Signed-off-by: Mahipal Challa <mchalla@marvell.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Add the OCTEON TX2 SDP EP device probe along with the
build infrastructure for Make and meson builds.
Signed-off-by: Mahipal Challa <mchalla@marvell.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Align the description to what the code snippet shows.
Fixes: 0a92e63fc4 ("raw/ioat: add local API to perform copies")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch bump the supported SDK and MC firmware version
to the latest.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
dpaa and dpaa2 config have evolved to be same. The same binary
can now work across the platforms. So, there is no need to maintain
two different build configs.
The dpaa config shall work for both generation of dpaa platforms.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Introduce enqueue and dequeue functions to support packet based
processing. And enable write-combining for ntb driver since it
can improve the performance a lot.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
