This commit implements TCP segmentation offload in TAP.
librte_gso library is used to segment large TCP payloads (e.g. packets
of 64K bytes size) into smaller MTU size buffers.
By supporting TSO offload capability in software a TAP device can be used
as a failsafe sub device and be paired with another PCI device which
supports TSO capability in HW.
For more details on librte_gso implementation please refer to dpdk
documentation.
The number of newly generated TCP TSO segments is limited to 64.
Reviewed-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Prior to this commit IP/UDP/TCP checksum offload calculations
were skipped in case of a multi segments packet.
This commit enables TAP checksum calculations for multi segments
packets.
The only restriction is that the first segment must contain
headers of layers 3 (IP) and 4 (UDP or TCP)
Reviewed-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
This was added to dev_stop when set MTU requested vport restart.
We are not requiring vport restart any more with set MTU as it just
needs vport to be inactive and doesn't need the port reconfigured.
Fixes: d121a6b5f7 ("net/qede: fix VF MTU update")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
qede pmd does not have support for legacy interrupt mode.
This causes slow path completion failure with uio_pci_generic module,
since it uses legacy interrupt (INTx) mode.
Fix this issue by installing legacy interrupt handler.
Fixes: ec94dbc573 ("qede: add base driver")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
We did not register unicast mac configuration handlers
for VF causing failure in bonding of VFs.
Also, mac_addr_set operation requires mac_remove followed
by mac_add.
Fixes: 86a2265e59 ("qede: add SRIOV support")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
build error gcc version 6.3.1 20161221 (Red Hat 6.3.1-1),
with EXTRA_CFLAGS="-O3":
.../drivers/net/thunderx/nicvf_ethdev.c:907:9:
error: ‘txq’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
if (txq->pool_free == nicvf_single_pool_free_xmited_buffers)
~~~^~~~~~~~~~~
.../drivers/net/thunderx/nicvf_ethdev.c:886:20:
note: ‘txq’ was declared here
struct nicvf_txq *txq;
^~~
Same error on function 'nicvf_eth_dev_init' and 'nicvf_dev_start', it
seems 'nicvf_set_tx_function' inlined when optimization enabled.
Initialize the txq and add NULL check before using it to fix.
Fixes: 7413feee66 ("net/thunderx: add device start/stop and close")
Cc: stable@dpdk.org
Reported-by: Richard Walsh <richard.walsh@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add functions to add/remove MAC addresses
Signed-off-by: Alex Kiselev <alex@therouter.net>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Chas Williams <chas3@att.com>
static logging macro RTE_PMD_DEBUG_TRACE is enabled with a few DEBUG
config options, including RTE_LIBRTE_ETHDEV_DEBUG
RTE_LIBRTE_ETHDEV_DEBUG is still used for data path logging, but all
ethdev logging switched to dynamic logging, so no need to enable static
logging macro for ethdev.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Replace RTE_PMD_DEBUG_TRACE with RTE_ETHDEV_LOG.
RTE_PMD_DEBUG_TRACE is using hardcoded PMD logtype and ERR log level,
controlled by compile time flags.
RTE_ETHDEV_LOG is using dynamic ethdev_logtype.
Also a few minor cleanups, like
- use %u for unsigned values like port_id which is uint16_t
- use PRIx64 for owner_id
- Join some log lines
- Unify to not have a "." at the end of the log
- Unify log start with uppercase
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Macro moved to header to be able to convert logging usage in header.
And since it has been moved to public header changed naming and added
RTE prefix, ethdev_log -> RTE_ETHDEV_LOG
Also need to add logtype variable to map file since logging macro used
from other libraries.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Change open_rx/tx_pcap/iface functions to open only a single pcap/dumper
and not loop num_of_queue times
The num_of_queue loop is already achieved by the
caller rte_kvargs_process
Fixing:
1. Opens N requested pcaps/dumpers instead of N^2
2. Leak of pcap/dumper's which are being overwritten by
the sequential calls to open_rx/tx_pcap/iface functions
3. Use the filename/iface args per queue and not just the last one
that overwrites the previous names
Fixes: 4c173302c3 ("pcap: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Ido Goshen <ido@cgstowernetworks.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
This feature is used to create a hole between HEADROOM
and actual data.Size of hole is specified in bytes as
module param to pmd
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The generic tunnel TSO was depended in the regular one capabilities to
be enabled.
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
The log_cache_nb_elem was never incremented, resulting
in all dirty pages to be missed during live migration.
Fixes: c16915b871 ("vhost: improve dirty pages logging performance")
Cc: stable@dpdk.org
Reported-by: Peng He <xnhp0320@icloud.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
This patch avoids direct access to device config sysfs file using
rte_pci_read_config instead.
Apart from replicating code, it turns out this direct access does
not always work if non-root users execute DPDK apps. In those cases
it is mandatory to go through VFIO specific function for reading pci
config space.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
At this point valid data is already set by rte_eth_get_device_info.
device field becomes zero and consumer is not able to retrieve pci data.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Damjan Marion <damarion@cisco.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Some illegal packets will lead to TX/RX hang and
can't recover automatically. This patch check those
illegal packets and protect TX/RX from hanging.
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The GL_SWR_PM_UP_THR value is not impacted from the link speed, its
value is set according to the total number of ports for a better
pipe-monitor configuration.
All bellowing relevant device IDs are considered (NICs, LOMs, Mezz
and Backplane):
Device-ID Value Comments
0x1572 0x03030303 10G SFI
0x1581 0x03030303 10G Backplane
0x1586 0x03030303 10G BaseT
0x1589 0x03030303 10G BaseT (FortPond)
0x1580 0x06060606 40G Backplane
0x1583 0x06060606 2x40G QSFP
0x1584 0x06060606 1x40G QSFP
0x1587 0x06060606 20G Backplane (HP)
0x1588 0x06060606 20G KR2 (HP)
0x158A 0x06060606 25G Backplane
0x158B 0x06060606 25G SFP28
Fixes: c9223a2bf5 ("i40e: workaround for XL710 performance")
Fixes: 75d133dd32 ("net/i40e: enable 25G device")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The vlan tci mask should be set to 0xEFFF, not 0x0,
the wrong mask will cause mask error for register set.
Fixes: d9d5e6f2f0 ("app/testpmd: set default flow director mask")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The summarized global register change info will be logged
no matter if there's real global register change. Since
only real changes are logged now, there's no need to
summarize global register change info, otherwise will
cause misunderstanding.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Currently no matter if there's global change, the global
configuration will be always logged. But there's no value
to log the info if the configuration is not changed.
This patch prints only real global changes.
Also, change log level from DEBUG to WARNING.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Cppcheck reports following error,
(error) Shifting 32-bit value by 36 bits is undefined behaviour
According to datasheet, there's PHY type and PHY type extension
in setting PHY config command, should exclude PHY type extension
when setting PHY type.
Fixes: 1bb8f66116 ("net/i40e: fix link down and negotiation")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
MAC address bits in mask registers should be set to zero
when the is mac mask is 0xFF, otherwise if it is 0x0
these bits should be to 0x3F.
Fixes: 82fb702077 ("ixgbe: support new flow director modes for X550")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Tunnel type format should be translated to ixgbe required format
before register set in FDIR cloud mode, Ans also some register
not useful in cloud mode but only useful in IP mode should be set
to zero as datasheet request.
Fixes: 82fb702077 ("ixgbe: support new flow director modes for X550")
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In cloud mode for FDIR, tunnel id should be set as protocol
request, the lower 8 bits should be set as reserved.
Fixes: 82fb702077 ("ixgbe: support new flow director modes for X550")
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In IP mode FDIR, X550 can support not only 4 tuple parameters
but also vlan tci in protocol, so add this feature to flow parser.
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
There are many registeres in x550 support stats of
flow director filters, for example the number of added
or removed rules and the number match or miss match packet
count for this for port, all these important information
can be read form registeres in x550 and display with command
xstats.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When detaching a port bound to ixgbe PMD, if the port
does not have any VFs, *vfinfo is not set and there is
a NULL dereference attempt, when calling
rte_eth_switch_domain_free(), which expects VFs to be used,
causing a segmentation fault.
Steps to reproduce:
./testpmd -- -i
testpmd> port stop all
testpmd> port close all
testpmd> port detach 0
Bugzilla ID: 57
Fixes: cf80ba6e20 ("net/ixgbe: add support for representor ports")
Cc: stable@dpdk.org
Reported-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
rte_errno should be saved only if error has occurred because rte_errno
could have garbage value.
Fixes: a6d83b6a92 ("net/mlx5: standardize on negative errno values")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Split maintainers logs from user logs.
A lot of debug logs are present providing internal information on how
the PMD works to users. Such logs should not be available for them and
thus should remain available only when the PMD is compiled in debug
mode.
This commits removes some useless debug logs, move the Maintainers ones
under DEBUG and also move dump into debug mode only.
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Write combining (WC) increases NIC performance by making better
utilization of PCI bus. ENA PMD may make usage of this feature.
To enable it load igb_uio driver with wc_activate set to 1.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Write combining (WC) increases NIC performance by making better
utilization of PCI bus, but cannot be used by all PMDs.
It will be enabled only if RTE_PCI_DRV_WC_ACTIVATE will be set in
drivers flags. For proper work also igb_uio driver must be loaded with
wc_activate set to 1.
When mapping PCI resources, firstly check if it support WC
and then try to use it.
In case of failure, it will fallback to normal mode.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add pointer to driver structure before calling rte_pci_map_device.
It allows to use driver flags for adjusting configuration.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Write combining (WC) increases NIC performance by making better
utilization of PCI bus, but cannot be use by all PMD.
To get internal_addr memory need to be mapped. But as memory could not be
mapped twice: with and without WC it should be skipped for WC. [1]
To do not spoil other drivers that potentially could use internal_addr,
parameter wc_activate adds possibility to skip it for those PMDs,
that do not use it.
[1] https://www.kernel.org/doc/ols/2008/ols2008v2-pages-135-144.pdf
section 5.3 and 5.4
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Ferruh and Andrew are doing excellent reviews and contributions
to ethdev API.
They become official maintainers and responsibles of this major lib.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Previously, we were putting an exclusive lock to prevent secondary
processes spinning up while we are sending our messages. However,
using exclusive locks had an effect of disallowing multiple
simultaenous unrelated messages/requests being sent, which was
not the intention behind locking.
Fix it to put a shared lock on the directory. That way, we still
prevent secondary process initializations while sending data over
IPC, but allow multiple unrelated transmissions to proceed.
Fixes: 89f1fe7e6d ("eal: lock IPC directory on init and send")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Qi Zhang <qi.z.zhang@intel.com>
In 17.08, the crypto operation was restructured,
and some reserved bytes (5) were added to have the mempool
pointer aligned to 64 bits, since the structure is expected
to be aligned to 64 bits, allowing future additions with no
ABI breakage needed.
In 18.05, a new 2-byte field was added, so the reserved bytes
were reduced to 3. However, this field was added after the first 3 bytes
of the structure, causing it to be placed in an offset of 4 bytes,
and therefore, forcing the mempool pointer to be placed after 16 bytes,
instead of a 8 bytes, causing unintentionally the ABI breakage.
This commit fixes the breakage, by swapping the reserved bytes
and the private_data_offset field, so the latter is aligned to 2 bytes
and the offset of the mempool pointer returns to its original offset,
8 bytes.
Fixes: 54c8368466 ("cryptodev: set private data for session-less mode")
Cc: stable@dpdk.org
Reported-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Converted the license header of the files
that still have the old full header.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Kevin Laatz <kevin.laatz@intel.com>
For all trace on the data-path move to dynamic logging.
Add new QAT_DP_LOG macro to separate from non-dp trace.
Use the overall RTE_LOG_DP_LEVEL to override and compile out
debug data-path trace.
Add "unlikely" in two appropriate error checks.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
For all trace not on the data-path move to dynamic logging.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Removed INIT_FUNC trace and other unused macros.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Document the driver and device naming formats.
Changed the underscores alignment.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Other services, apart from symmetric crypto,
such as compression, will be added in future patches.
Therefore, the assumption that only symmetric crypto
operations are processed will not be valid anymore,
and service type needs to be checked.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Optimize the dequeue function by inlining the response
processing function, assuming only symmetric
operations are supported.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Process response function is only implemented
for crypto symmetric operations, which do not require
some of the arguments.
Therefore, these arguments can be removed from the
function prototype.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
