The speed capability of the device can be reported to the upper-layer app
in rte_eth_dev_info_get API. In this API, the speed capability is derived
from the 'supported_speed', which is the speed capability actually
supported by the NIC. The value of the 'supported_speed' is obtained
once in the probe stage and may be updated in the scheduled task to deal
with the change of the transmission interface.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Currently, PF driver will report lsc when it detects the link status
change, it's not a generic implementation.
We refactor PF lsc event report by following scheme:
1. PF driver marks RTE_PCI_DRV_INTR_LSC in rte_pci_driver by default.
2. In the init stage, PF driver will detect whether firmware supports
lsc interrupt or not, driver will clear RTE_ETH_DEV_INTR_LSC flag if
firmware doesn't support lsc interrupt.
3. PF driver will report lsc event only when dev_conf.intr_conf.lsc is
set.
Note: If the firmware supports lsc interrupt, we also keep periodic
polling to deal with the interrupt loss.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Currently, VF driver periodically obtains link status from PF kernel
driver, and reports lsc event when detects link status change. Because
the period is 1 second, it's probably too late to report especially
in such as bonding scenario.
To solve this problem we use the following scheme:
1. PF kernel driver support immediate push link status to all VFs when
it detects the link status changes.
2. VF driver will detect PF kernel driver whether support push link
status in device init stage by sending request link info mailbox
message to PF, PF then tell VF the push capability by extend
HNS3_MBX_LINK_STAT_CHANGE mailbox message.
3. VF driver marks RTE_PCI_DRV_INTR_LSC in rte_pci_driver by default,
when it detects PF doesn't support push link status then it will clear
RTE_ETH_DEV_INTR_LSC flag.
So if PF kernel driver supports push link status to VF, then VF driver
will have RTE_ETH_DEV_INTR_LSC capability.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
- Add Intel ice PMD support on Windows.
- Remove #include sys/ioctl header file as it is not needed.
- Replace x86intrin.h with rte_vect.h to avoid __m_prefetchw conflicting
types.
- Replace POSIX usleep() API with rte API.
- Add a new macro for the access() API as the original function
has been deprecated on Windows.
- Add extra cflags '-fno-asynchronous-unwind-tables'
to avoid MinGW build error:
Error: invalid register for .seh_savexmm
- Add documentation to support ice PMD on Windows.
Update the release notes and features list for the same.
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Jie Zhou <jizh@microsoft.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add support for query Rx descriptor status in hns3 driver. Check the
descriptor specified and provide the status information of the
corresponding descriptor.
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Add support for query Tx descriptor status in hns3 driver. Check the
descriptor specified and provide the status information of the
corresponding descriptor.
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
This patch add support tx_done_cleanup ops, which could support for
the API rte_eth_tx_done_cleanup to free consumed mbufs on Tx ring.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
This patch add support for dumping module EEPROM.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Some Rx/Tx operations like queue setup and release, packet type get, and
Tx done cleanup have been supported on PF device. There are ops
functions directly added.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Configure VF device with RX port. Initialize receive and transmit unit,
set the receive and transmit functions. And support to check the
status of RX and TX descriptors.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Add information get operation for VF device.
RX and TX offload capabilities are same as the PF device.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Generate a random MAC address if none was assigned by PF during
the initialization of VF device. And support to add and remove
MAC address.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Introduce virtual function driver in txgbe PMD,
add simple init and uninit function to probe and remove the device.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Add documentation to support i40e PMD on Windows.
Update the release notes and features list for the same.
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Document FEC in NIC features, add information about FEC and add
implementation related support.
Fixes: b7ccfb09da95 ("ethdev: introduce FEC API")
Fixes: 9bf2ea8dbc65 ("net/hns3: support FEC")
Fixes: 62aafe035896 ("net/cxgbe: support configuring link FEC")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Adding bare minimum PMD library and doc build infrastructure
and claim the maintainership for octeontx end point PMD.
Signed-off-by: Nalla Pradeep <pnalla@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds support of the mbuf fast free offload to the
transmit datapath. This offload allows freeing the mbufs on
transmit completion in the most efficient way. It requires
the all mbufs were allocated from the same pool, have
the reference counter value as 1, and have no any externally
attached buffers.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The networking drivers features matrix had rows to show
OS and kernel modules support:
- BSD nic_uio
- Linux UIO
- Linux VFIO
- Other kdrv
- Windows
The kernel modules details are removed to keep only OS support:
- FreeBSD
- Linux
- Windows
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The UNMAINTAINED flag will be removed in a future patch.
Signed-off-by: Andrew Boyer <aboyer@pensando.io>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Added VLAN support for AMD XGBE driver
Adding below APIs for axgbe
- axgbe_enable_rx_vlan_stripping: to enable vlan header stripping
- axgbe_disable_rx_vlan_stripping: to disable vlan header stripping
- axgbe_enable_rx_vlan_filtering: to enable vlan filter mode
- axgbe_disable_rx_vlan_filtering: to disable vlan filter mode
- axgbe_update_vlan_hash_table: crc calculation and hash table update
based on vlan values post filter enable
- axgbe_vlan_filter_set: setting of active vlan out of max 4K values
before doing hash update of same
- axgbe_vlan_tpid_set: setting of default tpid values
- axgbe_vlan_offload_set: a top layer function to call strip/filter etc
based on mask values
Signed-off-by: Girish Nandibasappa <girish.nandibasappa@amd.com>
Acked-by: Somalapuram Amaranath <asomalap@amd.com>
Since the hns3 NIC hardware features are not counted
and it is supported in fact. Besides, the flow director
is not supported and need to delete it.
Fixes: fa29fe45a7b4 ("net/hns3: support queue start and stop")
Fixes: 521ab3e93361 ("net/hns3: add simple Rx path")
Fixes: bba636698316 ("net/hns3: support Rx/Tx and related operations")
Fixes: 936eda25e8da ("net/hns3: support dump register")
Fixes: 53b9f2b9a560 ("doc: update feature list in hns3 guide")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The ARMv8 platform support was tested and works fine with the ENA PMD.
It can be used on the AWS a1.* and m6g.* instances.
The ARMv8 support in ENA is at least from v19.11, where the VFIO DPDK
driver was fixed to work with 32-bit applications compiled for arm.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Supports check the status of Rx and Tx descriptors.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Mark "BSD nic_uio", "Usage doc", and "Perf doc" as supported
for the bnxt PMD.
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add RSS configure, support to RSS hash and reta operations for PF.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
