In the iavf_dev_rx_queue_start function, if the iavf_switch_queue
or iavf_switch_queue_lv function fails, the previously applied mbuf
is not released, resulting in leakage. The patch fixes the problem.
Fixes: 9cf9c02bf6ee ("net/iavf: add enable/disable queues for large VF")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The E810 supports four single-ended GPIO signals (SDP[20:23]). The 1PPS
signal outputs via SDP[20:23], which is measured by an oscilloscope.
This feature can be turned by a devargs which can select GPIO pin index
flexibly. Pin index 0 means SDP20, pin index 1 means SDP21 and so on.
The example for test command is as below:
./build/app/dpdk-testpmd -a af:00.0,pps_out='[pin:2]' -c f -n 4 -- -i
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add API ice_parser_profile_init to init a parser profile base on
a parser result and a mask buffer. The ice_parser_profile can feed to
low level FXP engine to create HW profile / field vector directly.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Implement function ice_parser_rt_execute which perform the main
loop of the parser.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Add internal helper function ice_xlt_kb_flg_get to aggregate 64 bit
packet flag into 16 bit key builder flags.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Add internal helper function ice_bst_tcam_match to perform ternary
match on boost TCAM.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Parse DDP section ICE_SID_RXPARSER_CAM into an array of
ice_bst_tcam_item.
Parse DDP section ICE_SID_LBL_RXPARSER_TMEM into an array of
ice_lbl_item.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Parse DDP section ICE_SID_RXPARSER_CAM or ICE_SID_RXPARSER_PG_SPILL
into an array of struct ice_pg_cam_item.
Parse DDP section ICE_SID_RXPARSER_NOMATCH_CAM or
ICE_SID_RXPARSER_NOMATCH_SPILL into an array of struct ice_pg_nm_cam_item.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Parse DDP section ICE_SID_RXPARSER_IMEM into an array of
struct ice_imem_item.
The Instruction Memory (IMEM) section contains three VLIW instructions
for the ALUs, a key extraction instruction for the Parse Graph CAM, and
several other fields.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Add new parser module which can parse a packet in binary
and generate information like ptype, protocol/offset pairs
and flags which can be used to feed the FXP profile creation
directly.
The patch added skeleton of the parser instance create and
destroy APIs:
ice_parser_create
ice_parser_destroy
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Update ice_hw_autogen.h.
Remove duplicated one in ice_nvm.h.
Replace ICE_NVM_ACCESS_GL_HIBA_MAX with GL_HIBA_MAX_INDEX.
Signed-off-by: Scott W Taylor <scott.w.taylor@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Add support for controlling SMA (SubMiniature version A) connectors
using GPIO get/set AQs.
Signed-off-by: Maciej Machnikowski <maciej.machnikowski@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Add functions used by the driver for setting and getting the shared
driver parameters. These will be used by the driver in order to share
the PTP clock index identifier between PF drivers.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Added the memory needed for the generic checksum offload (GCO)
feature, including the new flex descriptor ICE_RXDID_GSC.
Signed-off-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Add a helper function to check if the underlying part can
support 100M speeds.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
DDP package format is shared with different devices, for E810 device
we only support SEGMENT_TYPE_ICE_810.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
E810-T supports signed netlists and to support this, the NVM update
tool needs to be able to read the GL_MNG_DEF_DEVID register. Add
said register to the allowlist in ice_validate_nvm_rw_reg.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Change one of the input parameter (addr) in ice_read_cgu_reg_e822 and
ice_write_cgu_reg_e822 functions. This will avoid the shrink down
conversion from addr to cgu_msg.msg_addr_low.
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Currently shared code API does not allow to set/unset lb_en
and lan_en flags for advanced rules during their creation.
Because of that we have to use a workaround in switchdev
which is to update rule immediately after its creation.
This change will allow us to set/unset those flags right
away.
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
For some operating systems, 64-bit division requires using specific
implementations. Use the DIV_64BIT macro to replace open-coded division
so that the driver may convert this to the appropriate operating-system
specific implementation when necessary.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
In some devices, the function numbers used are non-contiguous. For
example, some two port devices will report as functions 0 and 2.
When distributing RSS and FDIR masks, which are global resources across
the active devices, it is required to have a contiguous PF id, which can
be described as a logical PF id. In the case above, function 0 would
have a logical PF id of 0, and function 2 would have a logical PF id of
1.
Using logical PF id can properly describe which slice of resources can
be used by a particular PF.
Cc: stable@dpdk.org
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Add missing initialisation of the accumulative SW xstat to
zero since it is sum of per-queue xstats.
Fixes: fdd7719eb3c1 ("net/sfc: add xstats for Rx/Tx doorbells")
Cc: stable@dpdk.org
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
This patch defines new RSS offload types for IPv4 and
L4(TCP/UDP/SCTP) checksum, which are required when users want
to distribute packets based on the IPv4 or L4 checksum field.
For example "flow create 0 ingress pattern eth / ipv4 / end
actions rss types ipv4-chksum end queues end / end", this flow
causes all matching packets to be distributed to queues on
basis of IPv4 checksum.
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Aman Deep Singh <aman.deep.singh@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
If the bond device was created by vdev mode, the kvlist was not free
after the bond device was closed.
This patch fixes it.
Fixes: 144dc4739975 ("net/bonding: fix leak on remove")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Min Hu (Connor) <humin29@huawei.com>
As per ABI policy, move the formerly experimental API's to the stable
section.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
As per ABI policy, move the formerly experimental API's to the stable
section.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
As per ABI policy, move the formerly experimental API's to the stable
section.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
As per ABI policy, move the formerly experimental API's to the stable
section.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
As per ABI policy, move the formerly experimental API's to the stable
section.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
As per ABI policy, move the formerly experimental API's to the stable
section.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
As per ABI policy, move the formerly experimental API's to the stable
section.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Add option to indicate whether outer header verification
need to be done as part of inbound IPsec processing.
With inline IPsec processing, SA lookup would be happening
in the Rx path of rte_ethdev. When rte_flow is configured to
support more than one SA, SPI would be used to lookup SA.
In such cases, additional verification would be required to
ensure duplicate SPIs are not getting processed in the inline path.
For lookaside cases, the same option can be used by application
to offload tunnel verification to the PMD.
These verifications would help in averting possible DoS attacks.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Soft expiry is not a mandatory IPsec feature. It is verified separately
with IPsec unit tests. So configuration of the same is not required.
Also, soft expiry tracking can cause perf degradation with some PMDs.
Since a separate UT is available and the same setting in ipsec-secgw is
not verifying the functionality, remove the same by clearing life
configuration.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
