Previously, the total number of event timers per adapter was set to an
arbitrary value, set it to mempool size instead as it defines the max
event timers that can be armed.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Rather than using linuxapp and bsdapp everywhere, we can change things to
use the, more readable, terms "linux" and "freebsd" in our build configs.
Rather than renaming the configs we can just duplicate the existing ones
with the new names using symlinks, and use the new names exclusively
internally. ["make showconfigs" also only shows the new names to keep the
list short] The result is that backward compatibility is kept fully but any
new builds or development can be done using the newer names, i.e. both
"make config T=x86_64-native-linuxapp-gcc" and "T=x86_64-native-linux-gcc"
work.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Rename the macro and all instances in DPDK code, but keep a copy of
the old macro defined for legacy code linking against DPDK
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Rename the macro to make things shorter and more comprehensible. For
both meson and make builds, keep the old macro around for backward
compatibility.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
These duplicate device id is causing incorrect mapping
for DPAA_SEC for test case execution on the basis of
capabilities.
Fixes: e155ca055e ("test/crypto: add tests for AMD CCP")
Cc: stable@dpdk.org
Reported-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This commit fixes a bug in which a unidirectional pdump could attempt to
remove devices it didn't create.
Fixes: 35cb223ab7 ("app/pdump: fix vdev cleanup")
Cc: stable@dpdk.org
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
The call to strlcpy uses either libc, libbsd or internal rte_strlcpy.
No need to call the DPDK flavor explicitly.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
usleep() is defined in unistd.h, which is missing from include list
in test_compressdev.c, causing compiler errors on FreeBSD.
Fixes: b06aa643ca ("test/compress: add initial unit tests")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Since all other apps have been moved to the "app" folder, the autotest app
remains alone in the test folder. Rather than having an entire top-level
folder for this, we can move it back to where it all started in early
versions of DPDK - the "app/" folder.
This move has a couple of advantages:
* This reduces clutter at the top level of the project, due to one less
folder.
* It eliminates the separate build task necessary for building the
autotests using make "make test-build" which means that developers are
less likely to miss something in their own compilation tests
* It re-aligns the final location of the test binary in the app folder when
building with make with it's location in the source tree.
For meson builds, the autotest app is different from the other apps in that
it needs a series of different test cases defined for it for use by "meson
test". Therefore, it does not get built as part of the main loop in the
app folder, but gets built separately at the end.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Move to "app" directory and enable with meson build.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Move app to "app" directory and enable with meson build. For consistency of
naming, the subdirectory is also renamed from cmdline_test to test-cmdline.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Function cmd_config_tx_metadata_specific_parsed() takes input value,
applies rte_cpu_to_be_32() on it, and stores it for Tx use.
Function cmd_show_tx_metadata_parsed() displays the stored value as is.
This patch modifies function cmd_show_tx_metadata_parsed(), to apply
rte_be_to_cpu_32() on the stored value before displaying it.
Fixes: c18feafa19 ("app/testpmd: support metadata as flow rule item")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Virtual devices added in pdump application
using rte_eal_hotplug_add should be removed explicitly
while exiting the pdump application, otherwise the
subsequent run of the pdump application will fail with the reason
that virtual devices with the same name already exists in primary.
Fixes: 6362f362a2 ("app/pdump: use EAL hotplug instead of ethdev attach")
Cc: stable@dpdk.org
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Let's check the received/sent mbufs, it can help debugging.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Prefetching packet was missing when do_macswap() was optimized.
Fixes: 62b52877ad ("app/testpmd: batch MAC swap for performance on x86")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The pointer is misused and could set wrong MAC address. As a result, some
of packets can be dropped in receiver side due to MAC address mismatch.
This can be shown as performance degradation.
Bugzilla ID: 188
Fixes: 62b52877ad ("app/testpmd: batch MAC swap for performance on x86")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This patch proposes a slightly different test-pmd quit operation: stop
all devices before starting to close any device. Basically, stop all
moving parts before beginning to remove them. The current test-pmd quit
is stopping and closing each device before moving to the next device.
If all devices in the system are independent of each other, this
difference is usually not important. In case of Soft NIC devices, any
such virtual device typically depends on one or more physical devices
being alive, as it accesses their queues, so this difference becomes
important.
Without this straightforward fix, all the Soft NIC devices need to be
manually stopped before the quit command is issued, otherwise the quit
command can sometimes crash the test-pmd application.
Fixes: d3a274ce9d ("app/testpmd: handle SIGINT and SIGTERM")
Cc: stable@dpdk.org
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Added assert check for rte_bbdev_*_op_alloc_bulk in bbdev test app
Coverity issue: 328516, 328525
Fixes: f714a18885 ("app/testbbdev: add test application for bbdev")
Cc: stable@dpdk.org
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
This patch uses the two session mempool approach to crypto perf
application. One mempool is for session header objects, and the other
is for session private data.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch changes the cryptodev queue pair configure structure
to enable two mempool passed into cryptodev PMD simutaneously.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Function iter_mempool is used for iterating slected mempool elements
and display the contents of elements for a max of 256 bytes. In case
of invalid or no name for mempool, no information is displayed.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Function show_mempool is used for displaying valid MEMPOOL.
In case of invalid or no name, whole list is dump.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Function show_ring is used for displaying information of RING instance
of the primary process.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Function show_crypto is used for displaying the crypto PMD under primary
process.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Function show_tm is used for displaying the tm PMD under the primary
process. This covers basic and per node|level details with statistics.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Function show_port is used for displaying the port PMD information under
primary process. The information shows basic, per queue and security.
Also helper MACRO 'MAX_STRING_LEN, STATS_BDR_FMT and STATS_BDR_STR' and
meson build file is updated for new functionality.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
There's very commonly that more than 4G DDR memory in NIC for HQoS,
so right now the queue threshold size of RED needs to expand to
uint64_t. For struct rte_tm_red_params, it has been fixed, but for
test-pmd TM configuration, it hasn't been fixed. This patch fixes it.
Fixes: bddc2f40b5 ("app/testpmd: add commands for shaper and wred profiles")
Cc: stable@dpdk.org
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>
There is need to add boundary for input number from commandline,
If it beyond the definition, code will return error.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Do four packets macswap in same loop iterate to squeeze more
CPU cycles.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The patch optimizes the mac swap operation by taking advantage
of SSE instructions, it only impacts x86 platform.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Move macswap workload to dedicate function, so we can further enable
platform specific optimized version.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add missing implementation for 64-bit log2 function, and extend
the unit test to test this new function. Also, remove duplicate
reimplementation of this function from testpmd and memalloc.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add an rte_bsf64 function that follows the convention of existing
rte_bsf32 function. Also, add missing implementation for safe
version of rte_bsf32, and implement unit tests for all recently
added bsf varieties.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Code refactoring to separate validation from benchmarking part.
Added op's status checking after rte_compressdev_dequeue_burst
function.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Acked-by: Shally Verma <shally.verma@caviumnetworks.com>
Added performance measurement part into compression perf. test.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Acked-by: Shally Verma <shally.verma@caviumnetworks.com>
Added parser part into compression perf. test.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Acked-by: Shally Verma <shally.verma@caviumnetworks.com>
Improvements added to interrupt test:
- test is run in loop (number of iterations is specified by
TEST_REPETITIONS define) which ensures more accurate results
- mapping cores to thread parameteres was put in order.
Master core is always set at first index. It fixes problem with
running test for only one core
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Test application and Turbo Software driver were adapted
to support chained-mbuf for bigger TB sizes.
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Improvements added to throughput test:
- test is run in loop (number of iterations is specified by
TEST_REPETITIONS define) which ensures more accurate results
- length of input data is calculated based on amount of CBs in TB
- maximum number of decoding iterations is gathered from results
- added new functions responsible for printing results
- small fixes for memory management
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Offload cost test was improved in order to collect
more accurate results.
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
If timer events get dropped for some reason, the thread that launched
producer and worker cores will never exit, because the deadlock check
doesn't currently apply to the event timer adapter case. This commit
fixes this.
Fixes: d008f20bce ("app/eventdev: add event timer adapter as a producer")
Cc: stable@dpdk.org
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
We already changed to use generic IPC in pdump since below commit:
commit 660098d61f ("pdump: use generic multi-process channel")
The `rte_pdump_set_socket_dir()`, the `path` parameter of
`rte_pdump_init()` and the `enum rte_pdump_socktype` have been
deprecated since then. This commit removes these deprecated
APIs and also bumps the pdump ABI.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
In function cmd_set_mplsogre_encap_parsed(), MPLS label value was
set in mplsogre_encap_conf struct without the required offset.
As a result the value was copied incorrectly into
rte_flow_item_mpls struct.
This patch sets MPLS label value in appropriate location at
mplsogre_encap_conf struct, so it is correctly copied to
rte_flow_item_mpls struct.
Fixes: 3e77031be8 ("app/testpmd: add MPLSoGRE encapsulation")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
In function cmd_set_mplsoudp_encap_parsed(), MPLS label value was
set in mplsoudp_encap_conf struct without the required offset.
As a result the value was copied incorrectly into
rte_flow_item_mpls struct.
This patch sets MPLS label value in appropriate location at
mplsoudp_encap_conf struct, so it is correctly copied to
rte_flow_item_mpls struct.
Fixes: a1191d39cb ("app/testpmd: add MPLSoUDP encapsulation")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
The Bottom-of-Stack (bos) bit of MPLS indicates
whether its the last MPLS layer (1) or not (0).
Indicating that the encapsulating MPLS is the
last MPLS layer in the packet as the default
behavior is more appropriate since multiple
encapsulation actions is not supported.
Fixes: 3e77031be8 ("app/testpmd: add MPLSoGRE encapsulation")
Fixes: 3e77031be8 ("app/testpmd: add MPLSoGRE encapsulation")
Fixes: a1191d39cb ("app/testpmd: add MPLSoUDP encapsulation")
cc: stable@dpdk.org
Signed-off-by: Saleh Alsouqi <salehals@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
The DPDK website has a new URL scheme since June 2018.
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
When compiling with -O1, this error can appear:
app/test-eventdev/test_pipeline_common.c:332:6: error:
‘ret’ may be used uninitialized in this function
If there is no device, then ret is returned without being initialized.
It is fixed by setting 0 as initial value.
Fixes: 032a965a8f ("app/eventdev: support Tx adapter")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
port_id size should be uint16_t,
fix where it is defined as uint8_t
Fixes: f8244c6399 ("ethdev: increase port id range")
Cc: stable@dpdk.org
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Because the user's callback is invoked in eal interrupt callback, the
interrupt callback need to be finished before it can be unregistered
when detaching device. So finish callback soon and use a deferred
removal to detach device is need.
It is a workaround, once the device detaching be moved into the eal in
the future, the deferred removal could be deleted. This patch aim to
add this workaround and refine the function name and the description to
be more explicit and comment the limitation.
Fixes: 2049c5113f ("app/testpmd: use hotplug failure handler")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
The patch fixes the memory allocation for the meter DSCP table.
Fixes: e63b50162a ("app/testpmd: clean metering and policing commands")
Cc: stable@dpdk.org
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This reverts the patch that enables default RSS action by setting
key=NULL and key_len=0.
In current testpmd implementation a key pointer must exist if
key_len!=0. For example, the following flow rule will cause a
segmentation fault:
flow create 0 <pattern> actions rss queues 0 1 end key_len 40 / end
Fixes: a4391f8bae ("app/testpmd: set default RSS key as null")
Cc: stable@dpdk.org
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
testpmd only sets the L4 len in case of TCP packets.
some PMD's like tap rely on mbuf meta data to calculate csum
This will set the L4 len for UDP packets same as TCP
Fixes: 160c3dc945 ("app/testpmd: introduce IP parsing functions in csum fwd engine")
CC: stable@dpdk.org
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
There is an error in function search_rx_offload(),
it will break when get unexpected return value from function
rte_eth_dev_rx_offload_name(), but rte_eth_dev_rx_offload_name()
will return some unexpected value indeed.
Fixes: c73a907187 ("app/testpmd: add commands to test new offload API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
When creating an RSS rule without specifying a key (see [1]) it is
expected that the device will use the default key.
A NULL key is used to indicate to a PMD it should use
its default key, however testpmd assigns a non-NULL dummy key
(see [2]) instead.
This does not enable testing any PMD behavior when the RSS key is not
specified. This commit fixes this limitation by setting key to NULL.
[1]
RSS rule example without specifying a key:
flow create 0 ingress <pattern> / end actions rss queues 0 1 end / end
[2]
Testpmd default key assignment:
.key= "testpmd's default RSS hash key, "
"override it for better balancing"
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Set port status to stopped for newly added devices.
Fixes: 2950a76931 ("bond: testpmd support")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
ol_flags can be wrong if DEV_TX_OFFLOAD_VLAN_INSERT is not set in
tx_offloads
Fixes: 3eecba267c ("app/testpmd: cleanup internal Tx offloads flags field")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Y stands for Yellow, R stands for Red.
Fixes: 30ffb4e67e ("app/testpmd: add commands traffic metering and policing")
Cc: stable@dpdk.org
Signed-off-by: Leah Tekoa <leah@ethernitynet.com>
As struct rte_tm_shaper_params defined, the command line of
testpmd should include committed and peak parameters, but
right now the command line doesn't identify whether it's
committed or peak parameter. This patch identifies and
adds the clarify definition
Fixes: bddc2f40b5 ("app/testpmd: add commands for shaper and wred profiles")
Cc: stable@dpdk.org
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Some global variables can indeed be static, add static keyword to them.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This patch adds telemetry as a dependecy to all applications. Without these
changes, the --telemetry flag will not be recognised and applications will
fail to run if they want to enable telemetry.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Fix a typo on DEV_RX_OFFLOAD_QINQ_STRIP selection.
Fixes: 0074d02fca ("app/testpmd: convert to new Rx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
After probing is done, each new port must be setup.
The new ports are currently guessed by iterating on ports
matching the devargs string used for probing.
When probing a port, it is possible that one more port probing
get triggered (e.g. PF is automatically probed when probing
a VF representor). Such automatic probing will be caught only on event.
The iterator loop may be replaced by a call from the event callback.
In order to be able to test both modes, a command is added
to choose between iterator and event modes.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The callback for ethdev events was registered on port start,
so it was missing some events.
It is now registered at the beginning of the main function.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
It is possible to request probing of a device twice,
and possibly get new ports for this device.
However, the ports which were already probed and setup
must not be setup again. That's why it is checked whether
the port is already part of fwd_ports_ids array at the beginning
of the function setup_attached_port().
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The arrays ports_ids and fwd_ports_ids require the same kind
of update when some ports are removed or added.
The functions update_fwd_ports() and remove_unused_fwd_ports()
are merged in the new function remove_invalid_ports().
The part for adding new port is moved into setup_attached_port().
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The command "port detach" is removing the EAL rte_device
of the ethdev port specified as parameter.
The function name and some comments are updated to make clear
that we are detaching the whole device.
After detaching, the pointer, which maps a port to its device,
is reset. This way, it is possible to check whether a port
is still associated to a (not removed) device.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Previous patch introduces the Tx metadata feature, with unnecessary
restrictions on data entry.
It also used the metadata in txonly fwd engine only.
This fix removes the data entry restrictions on metadata item.
It also implements callback function to add the metadata in every
Tx packet, sent by any fwd engine.
Fixes: c18feafa19 ("app/testpmd: support metadata as flow rule item")
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Some user and tester require flow RSS to support more types,
so add "all" and "none" to make configuration more easy for users.
Tested-by: Yuan Peng <yuan.peng@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The hotplug attach/detach features are implemented in EAL layer.
There is a new ethdev iterator to retrieve ports from ethdev layer.
As announced earlier, the (buggy) ethdev functions are now removed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Example for MPLSoGRE tunnel:
ETH / IPV4 / GRE / MPLS / IP / L4..L7
In order to encapsulate such a tunnel there is a need to remove L2 of
the inner packet and encap the remaining tunnel, this is done by
applying 2 rte flow commands l2_decap followed by mplsogre_encap.
Both commands must appear in the same flow, and from the point of the
packet it both actions are applied at the same time. (There is no part
where a packet doesn't have L2 header).
Decapsulating such a tunnel works the other way, first we need to decap
the outer tunnel header and then apply the new L2.
So the commands will be mplsogre_decap / l2_encap
Due to the complex encapsulation of MPLSoGRE flow action and
based on the fact testpmd does not allocate memory, this patch adds a
new command in testpmd to initialise a global structure containing the
necessary information to make the outer layer of the packet. This same
global structures will then be used by the flow commands in testpmd when
the action mplsogre_encap, mplsogre_decap, will be parsed, at this
point, the conversion into such action becomes trivial.
Signed-off-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
MPLSoUDP is an example for L3 tunnel encapsulation.
L3 tunnel type is a tunnel that is missing the layer 2 header of the
inner packet.
Example for MPLSoUDP tunnel:
ETH / IPV4 / UDP / MPLS / IP / L4..L7
In order to encapsulate such a tunnel there is a need to remove L2 of
the inner packet and encap the remaining tunnel, this is done by
applying 2 rte flow commands l2_decap followed by mplsoudp_encap.
Both commands must appear in the same flow, and from the point of the
packet it both actions are applied at the same time. (There is no part
where a packet doesn't have L2 header).
Decapsulating such a tunnel works the other way, first we need to decap
the outer tunnel header and then apply the new L2.
So the commands will be mplsoudp_decap / l2_encap
Due to the complex encapsulation of MPLSoUDP and L2 flow actions and
based on the fact testpmd does not allocate memory, this patch adds a
new command in testpmd to initialise a global structures containing the
necessary information to make the outer layer of the packet. This same
global structures will then be used by the flow commands in testpmd when
the action mplsoudp_encap, mplsoudp_decap, l2_encap, l2_decap, will be
parsed, at this point, the conversion into such action becomes trivial.
The l2_encap and l2_decap actions can also be used for other L3 tunnel
types.
Signed-off-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
As described in [1], this series adds option to set metadata value
as match pattern when creating a new flow rule.
This patch introduces additional options in testpmd commands:
- New item type "meta" "data"
- New per-port offload flag "match_metadata".
It also adds commands to configure the tx_metadata value to use:
- New 'config' command takes a 32 bit value and stores it per port:
port config <port_id> tx_metadata <value>
testpmd will add to any Tx packet sent from this port the metadata
value, and set ol_flags accordingly.
- A matching 'show' command is added to read the configured value:
port config <port_id> tx_metadata <value>
[1] "ethdev: support metadata as flow rule criteria"
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
After closing a port, it cannot be restarted.
So there is no reason to not free all associated resources.
The last step was done with rte_eth_dev_detach() which is deprecated.
Instead of blindly removing the associated rte_device, the driver should
check if no more port (ethdev, cryptodev, etc) is open for the device.
The last ethdev freeing which were done by rte_eth_dev_detach(),
are now done at the end of rte_eth_dev_close() if the driver supports
the flag RTE_ETH_DEV_CLOSE_REMOVE.
There will be a transition period for PMDs to enable this new flag
and migrate to the new behaviour.
When enabling RTE_ETH_DEV_CLOSE_REMOVE, the PMD must free all its
private resources for the port, in its dev_close function.
It is advised to call the dev_close function in the remove function
in order to support removing a device without closing its ports.
Some drivers does not allocate MAC addresses dynamically or separately.
In those cases, the pointer is set to NULL, in order to avoid wrongly
freeing them in rte_eth_dev_release_port().
A closed port will have the state RTE_ETH_DEV_UNUSED which is
considered as invalid by rte_eth_dev_is_valid_port().
So validity is not checked anymore for closed ports in testpmd.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
The testpmd application aim is for testing;
so order of operations should not be enforced.
There was a test to forbid detaching before closing a port.
However, it may interesting to test what happens in such case.
It is possible for a PMD to automatically close the port when detaching.
in order to avoid a crash, it is checked that the port must be stopped
before detaching (as for closing).
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
When detaching a port, the full rte_device is removed.
If the rte_device was hosting several ports,
the testpmd list of ports must be updated for multiple removals.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
If user explicitly requested memory to be allocated from a socket via
`port-numa-config` and `ring-numa-config`, and if that socket is
valid, add that socket into socket_ids[] so that mempool allocated for
that socket.
Fixes: dbfb8ec709 ("app/testpmd: optimize mbuf pool allocation")
Cc: stable@dpdk.org
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
We use _GNU_SOURCE all over the place, but often times we miss
defining it, resulting in broken builds on musl. Rather than
fixing every library's and driver's and application's makefile,
fix it by simply defining _GNU_SOURCE by default for all
builds.
Remove all usages of _GNU_SOURCE in source files and makefiles,
and also fixup a couple of instances of using __USE_GNU instead
of _GNU_SOURCE.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
when changing verbosity level it will configure rx/tx callbacks to dump
packets based on the verbosity value as following:
1- dump only received packets:
testpmd> set verbose 1
2- dump only sent packets:
testpmd> set verbose 2
3- dump sent and received packets:
testpmd> set verbose (any number > 2)
4- disable dump
testpmd> set verbose 0
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
add new rx/tx callback functions to be used for dumping the packets.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
verbosity for the received/sent packets is needed in all of the
forwarding engines so moving it to be in a separate function
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Once the lcore list setting excluded the socket which physical device
attached, it will cause failure. Meanwhile, it will disable Testpmd
cross NUMA scenario.
Fixes: dbfb8ec709 ("app/testpmd: optimize mbuf pool allocation")
Cc: stable@dpdk.org
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
add commands to support following actions:
- RTE_FLOW_ACTION_TYPE_SET_MAC_SRC
- RTE_FLOW_ACTION_TYPE_SET_MAC_DST
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
The cmdline settings of port-numa-config and rxring-numa-config have
been flushed by the following init_config. If we don't configure the
port-numa-config, the virtual device will allocate the device ports to
socket 0. It will cause failure when the socket 0 is unavailable.
eg:
testpmd -l <cores from socket 1> --vdev net_pcap0,iface=lo
--socket-mem=64 -- --numa --port-numa-config="(0,1)"
--ring-numa-config="(0,1,1),(0,2,1)" -i
...
Configuring Port 0 (socket 0)
Failed to setup RX queue:No mempool allocation on the socket 0
EAL: Error - exiting with code: 1
Cause: Start ports failed
Fix by allocate the devices port to the first available socket or the
socket configured in port-numa-config.
Fixes: 487f9a592a ("app/testpmd: fix NUMA structures initialization")
Fixes: 20a0286fd2 ("app/testpmd: check socket id validity")
Cc: stable@dpdk.org
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The helper rte_eth_dma_zone_reserve() is called by PMDs
when probing a new port.
It creates a new memzone with an unique name.
The name of this memzone was using the name of the driver
doing the probe.
In order to avoid assigning the driver before the end of the probing,
the driver name is removed from these memzone names.
The ethdev name (data->name) is not used because it may be too long
and may be not set at this stage of probing.
Syntax of old name: <driver>_<ring>_<port>_<queue>
Syntax of new name: eth_p<port>_q<queue>_<ring>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch modify the device event callback process function name to be
more explicit, change the variable to be const. And more, because not only
eal device helper will use the callback, but also vfio bus will use the
callback to handle hot-unplug, so exposure the API out from private eal.
The bus drivers and eal device would directly use this API to process
device event callback.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This patch use testpmd for example, to show how an app smoothly handle
failure when device be hot-unplug. Except that app should enabled the
device event monitor and register the hotplug event’s callback, it also
need enable hotplug handle mechanism before running. Once app detect the
removal event, the hot-unplug callback would be called. It will first stop
the packet forwarding, then stop the port, close the port, and finally
detach the port to clean the device and release the resources.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add following testpmd run-time commands to support test of TM packet
marking:
set port tm mark ip_ecn <port_id> <green> <yellow> <red>
set port tm mark ip_dscp <port_id> <green> <yellow> <red>
set port tm mark vlan_dei <port_id> <green> <yellow> <red>
Signed-off-by: Krzysztof Kanas <krzysztof.kanas@caviumnetworks.com>
Fixes bad arguments error for cli commands related to adding meter
profile for srtcm_rfc2697, trtcm_rfc2698 and trtcm_rfc4115.
error log:
testpmd> add port meter profile trtcm_rfc2698 2 0 3125000000
3125000000 2500000 2500000
Bad arguments
Fixes: 30ffb4e67e ("app/testpmd: add commands traffic metering and policing")
Cc: stable@dpdk.org
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This adds a new forwarding mode to testpmd to simulate
more realistic behavior of a guest machine engaged in receiving
and sending packets performing Virtual Network Function (VNF).
The goal is to enable a simple way of measuring performance impact on
cache and memory footprint utilization from various VNF co-located on
the same host machine. For this it does:
* Buffer packets in a FIFO:
Create a fifo to buffer received packets. Once it flows over put
those packets into the actual tx queue. The fifo is created per tx
queue and its size can be set with the --noisy-tx-sw-buffer-flushtime
commandline parameter.
A second commandline parameter is used to set a timeout in
milliseconds after which the fifo is flushed.
--noisy-tx-sw-buffer-size [packet numbers]
Keep the mbuf in a FIFO and forward the over flooding packets from the
FIFO. This queue is per TX-queue (after all other packet processing).
--noisy-tx-sw-buffer-flushtime [delay]
Flush the packet queue if no packets have been seen during
[delay]. As long as packets are seen, the timer is reset.
Add several options to simulate route lookups (memory reads) in tables
that can be quite large, as well as route hit statistics update.
These options simulates the while stack traversal and
will trash the cache. Memory access is random.
* simulate route lookups:
Allocate a buffer and perform reads and writes on it as specified by
commandline options:
--noisy-lkup-memory [size]
Size of the VNF internal memory (MB), in which the random
read/write will be done, allocated by rte_malloc (hugepages).
--noisy-lkup-num-writes [num]
Number of random writes in memory per packet should be
performed, simulating hit-flags update. 64 bits per write,
all write in different cache lines.
--noisy-lkup-num-reads [num]
Number of random reads in memory per packet should be
performed, simulating FIB/table lookups. 64 bits per read,
all write in different cache lines.
--noisy-lkup-num-reads-writes [num]
Number of random reads and writes in memory per packet should
be performed, simulating stats update. 64 bits per read-write, all
reads and writes in different cache lines.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
In interactive mode, when the "quit" command is issued, pmd_test_exit()
is being called twice, once through the "quit" command and the other
after termination of prompt.
Remove duplicated exit routine by removing call from "quit" command.
Steps to reproduce:
- Run testpmd in interactive mode.
- type "quit".
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Brian Archbold <brian.archbold@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
existing testpmd command "show port info" is too verbose.
Added a new summary command to print brief information on ports.
console output:
testpmd> show port summary all
Number of available ports: 2
Port MAC Address Name Driver Status Link
0 11:22:33:44:55:66 0000:07:00.0 net_i40e up 40000Mbps
1 66:55:44:33:22:11 0000:07:00.1 net_i40e up 40000Mbps
Signed-off-by: Emma Finn <emma.finn@intel.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Devargs may affect how device works but currently we don't have a
way to observe provided devargs.
Add ability to print device argument as part of port info,
For example, for "--vdev net_pcap0,iface=lo" output will be
"
********************* Infos for port 1 *********************
MAC address: 02:70:63:61:70:00
Device name: net_pcap0
Driver name: net_pcap
Devargs: iface=lo
....
"
or for "-w0000:86:00.1,queue-num-per-vf=8",
"
********************* Infos for port 0 *********************
MAC address: 3C:FD:FE:AB:B4:41
Device name: 0000:86:00.1
Driver name: net_i40e
Devargs: queue-num-per-vf=8
....
"
`Devargs` line may not be printed at all if devargs is not provided for
that device.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Collect and prints the statistics for PKT_RX_EL4_CKSUM_BAD
errors.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Added outer-udp Tx HW checksum support for csum forward engine
if device supports DEV_TX_OFFLOAD_OUTER_UDP_CKSUM.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Introduced DEV_TX_OFFLOAD_OUTER_UDP_CKSUM offload flags and
PKT_TX_OUTER_UDP_CKSUM mbuf ol_flags to enable Tx outer UDP
checksum offload.
To use hardware Tx outer UDP checksum offload, the user needs to,
- enable following in mbuf:
a) fill outer_l2_len and outer_l3_len in mbuf
b) set the PKT_TX_OUTER_UDP_CKSUM flag
c) set the flag PKT_TX_OUTER_IPV4 or PKT_TX_OUTER_IPV6
- configure DEV_TX_OFFLOAD_OUTER_UDP_CKSUM offload flags in slow path
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Introduced DEV_RX_OFFLOAD_OUTER_UDP_CKSUM Rx offload flag and
PKT_RX_OUTER_L4_CKSUM_* mbuf ol_flags to detect outer UDP checksum
status.
- To use hardware Rx outer UDP checksum offload, the user needs to
configure DEV_RX_OFFLOAD_OUTER_UDP_CKSUM offload flags in slowpath.
- Driver updates checksum status in mbuf ol_flag as
PKT_RX_OUTER_L4_CKSUM_* flags.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
This action is useful for offloading loopback mode, where the hardware
will swap source and destination MAC addresses in the outermost Ethernet
header before looping back the packet. This action can be used in
conjunction with other rewrite actions to achieve MAC layer transparent
NAT where the MAC addresses are swapped before either the source or
destination MAC address is rewritten and NAT is performed.
Must be used with a valid RTE_FLOW_ITEM_TYPE_ETH flow pattern item.
Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error should be returned by the
PMDs.
Original work by Shagun Agrawal
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add actions:
- SET_TP_SRC - set a new TCP/UDP source port number.
- SET_TP_DST - set a new TCP/UDP destination port number.
Original work by Shagun Agrawal
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add actions:
- SET_IPV4_SRC - set a new IPv4 source address.
- SET_IPV4_DST - set a new IPv4 destination address.
- SET_IPV6_SRC - set a new IPv6 source address.
- SET_IPV6_DST - set a new IPv6 destination address.
Original work by Shagun Agrawal
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Command shouldn't ask RSS hash functions as argument to get supported
RSS hash function, those values will be overwritten by PMD anyway.
To display configured RSS hash functions
"show port (port_id) rss-hash"
To display configured RSS hash functions and hash key
"show port (port_id) rss-hash key"
Fixes: 8205e241b2 ("app/testpmd: add missing type to RSS hash commands")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
In "show port info #" cmd output, "Supported flow types:" part is
not clear what flow types are listed.
Those are flow types that hash calculation offload supported by NIC.
Updated command output as "Supported RSS offload flow types:"
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Update implementation that when PKT_RX_QINQ_STRIPPED mbuf ol_flags
set by PMD, PKT_RX_QINQ, PKT_RX_VLAN_STRIPPED & PKT_RX_VLAN
should be also set.
Clarify mbuf documentations that when PKT_RX_QINQ set PKT_RX_VLAN also
should be set.
So that appllication can rely on PKT_RX_QINQ flag to access both
mbuf.vlan_tci & mbuf.vlan_tci_outer
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This commit replaces all local information about pattern items and
actions as well as flow rule duplication code with calls to
rte_flow_conv().
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Based on the documentation and help print, the sub command
for csum suppose to be "parse-tunnel" instead of "parse_tunnel".
Fixes: 64fc36064d ("app/testpmd: add csum parse-tunnel command")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Since the following commit, PKT_RX_VLAN indicates the presence of
mbuf's vlan_tci, not PKT_RX_VLAN_STRIPPED.
Fixes: 380a7aab1a ("mbuf: rename deprecated VLAN flags")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, mempools can only be allocated either using native
DPDK memory, or anonymous memory. This patch will add two new
methods to allocate mempool using external memory (regular or
hugepage memory), and add documentation about it to testpmd
user guide.
It adds a new flag "--mp-alloc", with four possible values:
native (use regular DPDK allocator), anon (use anonymous
mempool), xmem (use externally allocated memory area), and
xmemhuge (use externally allocated hugepage memory area). Old
flag "--mp-anon" is kept for compatibility.
All external memory is allocated using the same external heap,
but each will allocate and add a new memory area.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Convert existing Tx service based pipeline to Tx adapter based APIs and
simplify worker functions.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Remove unnecessary newline at the end of logs.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The field, 'cipher_iv.data' is allocated twice when cipher is not null.
Ideally the allocation should depend only on the field
'cperf_options.cipher_iv_sz'. This will make sure this code path gets
valid for ciphers which doesn't require IV.
Fixes: 0fbd75a99f ("cryptodev: move IV parameters to session")
Cc: stable@dpdk.org
Signed-off-by: Akash Saxena <akash.saxena@caviumnetworks.com>
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
IV is not required for all ciphers. Making sure the null check is done
only when 'cipher_iv_sz' is non-zero.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Akash Saxena <akash.saxena@caviumnetworks.com>
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Authentication key is not required for all algorithms. Making sure the
null check is done only when 'auth_key_sz' is non-zero.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Signed-off-by: Ayuj Verma <ayuj.verma@caviumnetworks.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Added missing JUMP flow action in flow_action array.
Without this the flow rule cannot be created for JUMP action.
Fixes: 938a184a18 ("app/testpmd: implement basic support for flow API")
Cc: stable@dpdk.org
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add a check for the DEV_RX_OFFLOAD_SECURITY flag to the
port_offload_cap_display().
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
By default, testpmd will create membuf pool for all NUMA nodes and
ignore EAL configuration.
Count the number of available NUMA according to EAL core mask or core
list configuration. Optimized by only creating membuf pool for those
nodes.
Fixes: c9cafcc82d ("app/testpmd: fix mempool creation by socket id")
Cc: stable@dpdk.org
Signed-off-by: Phil Yang <phil.yang@arm.com>
Acked-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Omitting inputs and outputs mbuf creation for BaseBand Null Device
as inputs and outputs data do not exist for Null Device
Fixes: b2a4654f08 ("mempool: check for zero size creation")
Cc: stable@dpdk.org
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
These functions are buggy from the very beginning and should not be used.
Generic EAL hotplug mechanisms should be used instead.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
rte_eth_dev_attach() is to be deprecated.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Auth IV offset was not being set when creating the crypto session.
Fixes: acf8616901 ("cryptodev: add auth IV")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Without this patch, testpmd command to config Rx offload keep_crc
would fail and report "Bad argument".
This patch also fix the command to config the Tx offload mbuf_fast_free.
Fixes: 70815c9eca ("ethdev: add new offload flag to keep CRC")
Fixes: c73a907187 ("app/testpmd: add commands to test new offload API")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
After adding RSS hash offload check, default rss_hf will fail on devices
that do not support all bits. This will lead to dcb config failure. The
patch fixes this issue by reading current valid rss_conf from the device.
Fixes: 8863a1fbfc ("ethdev: add supported hash function check")
Fixes: 1a572499be ("app/testpmd: setup DCB forwarding based on traffic class")
Cc: stable@dpdk.org
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
If the "port config all crc-strip on" command is issued,
The DEV_RX_OFFLOAD_KEEP_CRC offload flag should be cleared.
If the "port config all crc-strip off command is issued,
The DEV_RX_OFFLOAD_KEEP_CRC offload flag should be set.
Fixes: 70815c9eca ("ethdev: add new offload flag to keep CRC")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
print_err_msg uses message field that may be not initialized causing
segmentation fault.
Fixes: 12f76f5247 ("app/testpmd: add command to resume a TM node")
Signed-off-by: Krzysztof Kanas <krzysztof.kanas@caviumnetworks.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Free the buffer allocated for shared_shaper_id array in
case of configuration without shared shapers.
Fixes: 996cb153af ("app/testpmd: add commands for TM nodes and hierarchy commit")
Signed-off-by: Nithin Dabilpuram <nithin.dabilpuram@caviumnetworks.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
Use proper teardown sequence when SIGINT is caught to prevent
eventdev from going into undefined state.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch reverts the testpmd CLI prompt routine modifications done
in order to support softnic.
The reason of doing so is due to testpmd abnormal exit observed on
several setups caused by the softnic modifications to this routine,
for example: When running testpmd with tap interface
(testpmd
-n 4 --vdev=net_tap0,iface=tap0,remote=eth1 -- --burst=64
--mbcache=512 -i --nb-cores=7 --rxq=2 --txq=2 --txd=512
--rxd=512 --port-topology=chained --forward-mode=rxonly)
testpmd crashes seconds after presenting its prompt with the following
error:
testpmd> PANIC in prompt():
CLI poll error (-1)
Thread 1 "testpmd" received signal SIGABRT, Aborted.
0x00007ffff668e0d0 in raise () from /lib64/libc.so.6
(gdb) bt
#0 0x00007ffff668e0d0 in raise () from /lib64/libc.so.6
#1 0x00007ffff668f6b1 in abort () from /lib64/libc.so.6
#2 0x0000000000468027 in __rte_panic ()
#3 0x00000000004876ed in prompt ()
#4 0x000000000046dffc in main ()
When running testpmd with bare-metal device
(testpmd -n 4 --socket-mem=1024,1024 -w 04:00.0 --
--burst=64 --mbcache=512 -i --nb-cores=7
--rxq=64 --txq=4 --txd=16 --rxd=16)
and pressing CTRL+D right after testpmd prompt is presented then
the program crashes while presenting the same messages as above.
Needless to say that this behavior is not observed when using the
previous CLI prompt routine.
Fixes: 0ad778b398 ("app/testpmd: rework softnic forward mode")
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
There is about 3% perf drop. And it is because of a bitrate
calculation in the datapath. So improve it by maintaining an array
of port indexes in testpmd, which is updated with ethdev events.
Fixes: 8728ccf376 ("fix ethdev ports enumeration")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Due to the complex NVGRE_ENCAP flow action and based on the fact testpmd
does not allocate memory, this patch adds a new command in testpmd to
initialise a global structure containing the necessary information to
make the outer layer of the packet. This same global structure will
then be used by the flow command line in testpmd when the action
nvgre_encap will be parsed, at this point, the conversion into such
action becomes trivial.
This global structure is only used for the encap action.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Tested-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Due to the complex VXLAN_ENCAP flow action and based on the fact testpmd
does not allocate memory, this patch adds a new command in testpmd to
initialise a global structure containing the necessary information to
make the outer layer of the packet. This same global structure will
then be used by the flow command line in testpmd when the action
vxlan_encap will be parsed, at this point, the conversion into such
action becomes trivial.
This global structure is only used for the encap action.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Tested-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
The crypto performance application was not being compiled
with -O3, which means that the performance shown may not be
optimal.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Using a small number of sessions results in rte_mempool_create call
with cache_size > n, which fails. There is no need to cache the elements,
as there is no performance impact.
Fixes: 501c0a3b14 ("app/crypto-perf: limit number of sessions")
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
udp_cksum is duplicated, second one should be tcp_cksum
Fixes: c73a907187 ("app/testpmd: add commands to test new offload API")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
If "--disable-crc-strip" testpmd parameter issued, it removes the
DEV_RX_OFFLOAD_CRC_STRIP flag.
With introduction of new DEV_RX_OFFLOAD_KEEP_CRC offload flag, this
flag also should be set when this parameter issued.
Fixes: 70815c9eca ("ethdev: add new offload flag to keep CRC")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Current topology distribute forwarding streams to lcores by port, this
make unbalanced loading when port number larger than 2:
lcore 0: P0Q0->P1Q0, P0Q1->P1Q1
locre 1: P1Q0->P0Q0, P1Q1->P0Q1
If only one port has traffic, only one locre get fully loaded and the
other one get no forwarding. Performance is bad as only one core doing
forwarding in such case.
This patch distributes forwarding streams by queue, try to get streams
of each port handled by different lcore:
lcore 0: P0Q0->P1Q0, P1Q0->P1Q0
locre 1: P0Q1->P0Q1, P1Q1->P0Q1
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Modied the testpmd softnic forwarding mode as per the
changes in softnic PMD.
To run testpmd application with softnic fwd mode, following
command is used;
$ ./testpmd -c 0xc -n 4 --vdev 'net_softnic0,firmware=script.cli'
-- -i --forward-mode=softnic
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Extend struct rte_bpf_xsym with new fields to provide information about:
- for variables - type and size
- for functions - number of arguments and type/size of each argument
and return value
Such information would allow validate code to perform
more extensive checking on input BPF program and catch
misbehaving BPF code.
That change would cause ABI/API breakage for librte_bpf.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the function definition.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
This patch enables GSO for UDP/IPv4 packets. Oversized UDP/IPv4
packets transmitted over a GSO-enabled port will undergo segmentation.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Tested-by: Yuwei Zhang <yuwei1.zhang@intel.com>
Crypto dev would specify its headroom and tailroom requirement and the
application is expected to honour this while creating buffers.
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Currently, the info structure contains the maximum number
of sessions that a device can manage.
This field was useful when the session mempool was created inside
each device, but now it is created at the application level.
Most PMDs do not have a limitation on the sessions managed,
but a few do, therefore this field must remain in the structure.
However, a new value, 0, can be used to indicate that
a device does not have an actual maximum of sessions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Instead of creating a fixed number of sessions,
calculate the necessary number based on number of devices
and queue pairs used.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
ethdev layer introduced checks for application requested RSS hash
functions and returns error for ones unsupported by hardware
This check breaks some sample applications which blindly configures
RSS hash functions without checking underlying hardware support.
Updated examples to mask out unsupported RSS has functions during device
configuration.
Prints a log if configuration values updated by this check.
Fixes: aa1a6d87f1 ("ethdev: force RSS offload rules again")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Meijuan Zhao <meijuanx.zhao@intel.com>
Tested-by: Yingya Han <yingyax.han@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
In DPDK 17.11, the ethdev offloads API has changed:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
The new API is documented in the programmer's guide:
http://doc.dpdk.org/guides/prog_guide/poll_mode_drv.html#hardware-offload
For reminder, the main concepts in the new API were:
- All offloads are disabled by default
- Distinction between per port and per queue offloads.
The transition bits are now removed:
- Translation of the old API in ethdev
- rte_eth_conf.rxmode.ignore_offload_bitfield
- ETH_TXQ_FLAGS_IGNORE
The old API bits are now removed:
- Rx per-port rte_eth_conf.rxmode.[bit-fields]
- Tx per-queue rte_eth_txconf.txq_flags
- ETH_TXQ_FLAGS_NO*
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>
Some test applications and examples were not converted
to the new offload API introduced in 17.11.
For reference, see "Hardware Offload" in
doc/guides/prog_guide/poll_mode_drv.rst
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
COUNT action has been modified and has several fields not addressable
though testpmd. In addition, as those fields are not definable testpmd
is providing an empty configuration which is undefined.
Fixes: fb8fd96d42 ("ethdev: add shared counter to flow API")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
The vlan tci mask should be set to 0xEFFF, not 0x0,
the wrong mask will cause mask error for register set.
Fixes: d9d5e6f2f0 ("app/testpmd: set default flow director mask")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Below commit checks global device information to determine if a port uses
the softnic driver once initialized. Problem is that this information is
not available at this point when a port is initialized interactively
through a "port attach XXX" command, crashing testpmd.
This patch systematically initializes global device information to address
this issue.
Fixes: 5b590fbe09 ("app/testpmd: add traffic management forwarding mode")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Wrong index used to select descriptor number, causing setting up queue
with wrong number of descriptors.
Fixes: d44f8a485f ("app/testpmd: enable per queue configure")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Application can provide 0 for ring size to use default values. To not
log zero for that case get configured ring size from device.
Call the rte_eth_rxq_info_get() and rte_eth_txq_info_get() functions
to update the number of rx and tx descriptors.
Fixes: d44f8a485f ("app/testpmd: enable per queue configure")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
While previous fix with the same title does address the main issue, root
cause is that proper handling of spec/last/mask was overlooked in the
original patch.
Mask and last fields must be taken into account at all times.
Fixes: d0ad8648b1 ("app/testpmd: fix RSS flow action configuration")
Fixes: 67af7ecc52 ("app/testpmd: fix copy of raw flow item")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
For vdev, just calling rte_eth_dev_close() isn't enough to free all
the resources allocated during device probe, e.g. for virtio-user,
virtio_user_pmd_remove(), i.e. the remove() method of a vdev driver,
needs to be called to unlink the socket file created during device
probe. So this patch calls the rte_eth_dev_detach() for vdev when
quitting testpmd.
vdevs detach on testpmd exit implemented as workaround to fix
a virtio-user issue. The issue was virtio-user cleanup is not
called and existing socket file not cleaned up which will fail
next run.
Added a comment that this workaround should be converted to a proper
cleanup, not something specific to virtio-user, and not something
specific to vdev and testpmd.
Fixes: af75078fec ("first public release")
Fixes: bd8f50a45d ("net/virtio-user: support server mode")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
rte_cryptodev_get_header_session_size() and
rte_cryptodev_get_private_session_size() functions are
targeting symmetric sessions.
With the future addition of asymmetric operations,
these functions need to be renamed from *cryptodev_*_session_*
to *cryptodev_sym_*_session_* to be symmetric specific.
The two original functions are marked as deprecated
and will be removed in 18.08, so applications can still
use the functions in 18.05.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Shally Verma <shally.verma@caviumnetworks.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
inlined from ‘cperf_test_vector_get_from_file’ at
app/test-crypto-perf/cperf_test_vector_parsing.c:578:11:
app/test-crypto-perf/cperf_test_vector_parsing.c:510:3: error:
‘strncpy’ output truncated before terminating nul copying as many bytes
from a string as its length [-Werror=stringop-truncation]
strncpy(entry, line, strlen(line));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
app/test-crypto-perf/cperf_test_vector_parsing.c:528:5: error:
‘strncat’ output truncated before terminating nul copying as many bytes
from a string as its length [-Werror=stringop-truncation]
strncat(entry, line, strlen(line));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Found this issue with meson build and gcc 8.1.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Fixing CHECKED_RETURN issue by checking values returned
by rte_bbdev_dec_op_alloc_bulk and rte_bbdev_enc_op_alloc_bulk
functions.
Coverity issue: 279447, 279456
Fixes: f714a18885 ("app/testbbdev: add test application for bbdev")
Cc: stable@dpdk.org
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
When RTE_TEST_PMD_RECORD_BURST_STATS is enabled, testpmd collects
burst statistics and includes them in the port stats report. The
summary should include top 2 most frequent burst sizes, but there is a
bug in finding the top-2. During the scan of burst size counts, the
top-2 can change only if top-1 also changes.
Added logic to update the top-2 if current burst size is larger than
existing top-2, but smaller than existing top-1.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Daniel Shelepov <dashel@microsoft.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
app/test-bbdev/test_bbdev_vector.c:895:3:
error: ‘strncpy’ output truncated before terminating nul copying as
many bytes from a string as its length [-Werror=stringop-truncation]
strncpy(entry, line, strlen(line));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
app/test-bbdev/test_bbdev_vector.c:917:5:
error: ‘strncat’ output truncated before terminating nul copying as
many bytes from a string as its length [-Werror=stringop-truncation]
strncat(entry, line, strlen(line));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: f714a18885 ("app/testbbdev: add test application for bbdev")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
app/proc-info/main.c: In function ‘nic_xstats_display’:
app/proc-info/main.c:495:45: error:
‘%s’ directive writing up to 255 bytes into a regioni of size between 165 and 232
[-Werror=format-overflow=]
sprintf(buf, "PUTVAL %s/dpdkstat-port.%u/%s-%s N:%"
^~
PRIu64"\n", host_id, port_id, counter_type,
~~~~~~~~~~~~
app/proc-info/main.c:495:4: note:
‘sprintf’ output between 31 and 435 bytes into a destination of size 256
sprintf(buf, "PUTVAL %s/dpdkstat-port.%u/%s-%s N:%"
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PRIu64"\n", host_id, port_id, counter_type,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xstats_names[i].name, values[i]);
Fixes: 2deb6b5246 ("app/procinfo: add collectd format and host id")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Testpmd set CRC_STRIP offload blindly, this is wrong according offload
API definition, and will cause error for the PMDs that doesn't support
CRC_STRIP like virtual PMDs.
Check if underlying device report this capability and don't set it if
not supported.
Fixes: 0074d02fca ("app/testpmd: convert to new Rx offloads API")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add following testpmd run-time commands to support test of
new Rx offload API:
show port <port_id> rx_offload capabilities
show port <port_id> rx_offload configuration
port config <port_id> rx_offload <offload> on|off
port <port_id> rxq <queue_id> rx_offload <offload> on|off
Above last 2 commands should be run when the port is stopped.
And <offload> can be one of "vlan_strip", "ipv4_cksum", ...
Add following testpmd run-time commands to support test of
new Tx offload API:
show port <port_id> tx_offload capabilities
show port <port_id> tx_offload configuration
port config <port_id> tx_offload <offload> on|off
port <port_id> txq <queue_id> tx_offload <offload> on|off
Above last 2 commands should be run when the port is stopped.
And <offload> can be one of "vlan_insert", "udp_cksum", ...
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Setup number of Rx & Tx queues to 0 at rte_eth_dev_configure means
take driver's default queue number, so if during a re-configuration
previous queue number will be overwrite, this is not expected when
we configure dcb. The patch fix it by re-configure device with the
original queue number.
Fixes: 3be82f5cc5 ("ethdev: support PMD-tuned Tx/Rx parameters")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
The default RSS hash key automatically provided by testpmd for RSS actions
specified without one is so weak that traffic can't spread properly on L4
with it (as seen with TCPv6).
It is only 30 bytes long, zero-padded to RSS_HASH_KEY_LENGTH (64 bytes),
later truncated to 40 bytes for most PMDs. The presence of padding is
really what kills balancing.
This patch provides a full 64-byte (non-zero-terminated) string to address
this issue.
Fixes: d0ad8648b1 ("app/testpmd: fix RSS flow action configuration")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since the commit referenced below, specifying a RSS action without any
queues (e.g. "actions rss queues end / end") does not override the default
set automatically generated by testpmd.
In short, one cannot instantiate a RSS action with 0 target queues anymore
in order to determine how PMDs react (hint: this is currently undocumented
so they may reject it, however ideally they should interpret it as a
default setting like for other fields where empty values stand for
"defaults".)
Fixes: d0ad8648b1 ("app/testpmd: fix RSS flow action configuration")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Patch adding configurable locking has reshuffled some init stages, but
did not put them back in correct order. Fix order of init by moving
everything that was before arguments parsing into correct places.
Fixes: e505d84c64 ("app/testpmd: make locking memory configurable")
Reported-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The second parameter "name" in the function rte_eth_dev_detach
has been already redefined as "char *name __rte_unused",
"port_id" is printed instead of "name" in testpmd.
Fixes: b65ecf1993 ("devargs: rename legacy API")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Matan Azrad <matan@mellanox.com>
When a removable device is plugged-out, a RMV interrupt is invoked and
the application can catch the event in order to stop the device
management.
The Testpmd wrong behavior in this case is to detach the removed device
using the EAL detach API.
The EAL API does not invalidate the ethdev port and the port keeps
appearing as valid from the ethdev point of view.
Thus, the next operations for the ethtev port X may trigger an invalid
rte_device access. For example, calling "show port info X" may cause
segfault.
Moreover, the removed port is not removed from the Testpmd data-path
structures. Therefore, the invalid device may still be used by the
Testpmd data-path.
Call the Testpmd detach_port() function which uses the ethdev detach
API, and prepare the Testpmd forward ports database for a new
forwarding session without the detached port.
Fixes: 284c908cc5 ("app/testpmd: request device removal interrupt")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
In the RMV device event callback, there is a call for the removed
device stop operation which triggers a link status operation for the
removed device.
It may casue an error from the removed device PMD.
Skip the link status operation in the above described case.
Fixes: 284c908cc5 ("app/testpmd: request device removal interrupt")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
When the user uses the synchronic hot-plug commands, attach\detach, in
order to insert\remove a port from the system, the forward ports list
update is missed in the current implementation.
Thus, an invalid port may be used for data-path in case of detach
because the detached port was not removed from the forward port list.
In addition, a new port is not used for data-path in case of attach, as the
default behavior of Testpmd, because the attached port was not inserted
to the forward port list.
Update the forward port list in the above cases to allow the correct
port usage for data-path in the next packet forwarding start.
Fixes: edab33b1c0 ("app/testpmd: support port hotplug")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
A port Rx queue flush is done when the packet forwarding starts in
order to clean the port statistics for a new traffic session.
The flush operation is wrongly called before the update of the new
forward ports, and may fail due to flush operation for an invalid port
configured by the old session.
Move the new forward port setup to be done before the Rx queue flush.
Fixes: 7741e4cf16 ("app/testpmd: VMDq and DCB updates")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
When the forward ports are changed either by new portlist\portmask
configurations or by a port detachment, all the old forward streams
are freed and new streams are allocated to be aligned with the new
forward ports.
If the number of the forward ports drops to 0, there is an attempt
to wrongly allocate 0 memory for the streams.
Skip the streams memory allocation if no forward ports are configured.
Fixes: ce8d561418 ("app/testpmd: add port configuration settings")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
There are several cases of an invalid port data access that causes the
printing of all the valid ports, for example, when the user asks to
receive a port information of an invalid port.
Wrongly, the port with id 0 is printed in all the above described
cases, regardless of its validity.
Print port 0 only if it is valid as done for the rest of the ports.
Fixes: af75078fec ("first public release")
Fixes: b6ea6408fb ("ethdev: store numa_node per device")
Fixes: edab33b1c0 ("app/testpmd: support port hotplug")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Testpmd allows to create and control bonding devices by run time
command lines using the bonding PMD API.
Some bonding device slaves operations (close, stop, etc) should not be
used by the application and must be managed by the bonding PMD.
Thus, Testpmd manages slave flags to prevent the special operations
calls and when a slave is added to bonding device by a run time command
line, the flag is set.
There is one more way to define the slaves for a bonding device using
EAL command line and Testpmd doesn't set the slave flag in this case
what causes to the special operations to be called by Testpmd.
Add one more check to detect bonding slave device.
Fixes: 41b05095c4 ("app/testpmd: fix bonding start")
Fixes: 0e545d3047 ("app/testpmd: check stopping port is not in bonding")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
If mlockall() is called while allocated VA space is bigger than
amount of available RAM, FreeBSD kernel will deadlock and need
a hard reboot. We do allocate big amounts of memory because of
how new memory subsystem works, so calling mlockall() will cause
a deadlock. So, disable mlockall() by default on FreeBSD.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add two new command-line parameters for either enabling or
disabling locking all memory at app startup.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Change baseband device name:
- from turbo_sw to baseband_turbo_sw
- from bbdev_null to baseband_null
To keep backwards compatibility the old names are still valid
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Improve readability of test application by replacing
int values with rte_bbdev_event_type enum.
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Creation of new vectors to test and validate BBDevice capabilities
Test app documentation updated accordingly
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Update test vectors directory for Wireless Baseband Device:
- update test vectors names
- python script used for tests execution updated
Update the test app documentation:
- vector test names updated
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Splitting Queue Groups into UL/DL Groups in Turbo Software
Driver. They are independent for Decode/Encode.
Release note updated accordingly.
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
New test created to measure offload cost.
Changes were introduced in API, turbo software driver
and test application
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Support for optional CRC overlap in decode processing implemented
in Turbo Software driver
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Update Turbo Software driver for Wireless Baseband Device:
- function scaling input LLR values to specific range [-16, 16] added
- new test vectors to check device capabilities added
- release note updated accordingly
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
The crypto performance application requires at least
two cores: one master core that launches the other slaves
and one core acting as slave running the crypto device.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
