Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
The previous patches in the set convert per-port
logging to use NOTICE level and make this level default.
This provides the possibility to remove the dedicated
toggle for init-related messages and merge init logging
with the main log type. In order to keep these logs silent
by default, INFO level should be used.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Conversion to dynamic logging done in the previous patches
makes it possible to simplify internal controls for init
logging. This patch allows to prepare for such a change.
It makes init-unrelated messages use NOTICE level so that
the following patch will be able to convert init logging
to use INFO level and remain silent by default.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Use new rte_eth_linkstatus_get/set helper functions to handle link
status update.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add support for filters which drop packets when forming MCDI request
for a filter.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Despite being versatile, the hardware support for filtering has a number
of special properties which must be taken into account. Namely, there is
a known set of valid filters which don't take any effect despite being
accepted by the hardware.
The combinations of match flags and field values which can describe the
exceptional filters are as follows:
- ETHER_TYPE or ETHER_TYPE | LOC_MAC with IPv4 or IPv6 EtherType
- ETHER_TYPE | IP_PROTO or ETHER_TYPE | IP_PROTO | LOC_MAC with UDP or
TCP IP protocol value
- The same combinations with OUTER_VID and/or INNER_VID
These exceptional filters can be expressed in terms of RTE flow rules.
If the user creates such a flow rule, no traffic will hit the underlying
filter, and no errors will be reported.
This patch adds a means to prevent such ineffective flow rules from
being created.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
To filter all traffic, need to create two hardware filter specifications
with both unknown unicast and unknown multicast destination MAC address
match flags.
In terms of RTE flow API, this would require adding multiple flow rules
with corresponding ETH items. In order to avoid such a complication, the
patch implements a mechanism to auto-complete an underlying filter
representation of a flow rule in order to create additional filter
specifications featuring the missing match flags.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Knowledge of a network identifier is not sufficient to construct a
workable hardware filter for encapsulated traffic. It's obligatory to
specify one of the match flags associated with inner frame destination
MAC. If the address is unknown, then one needs to specify either unknown
unicast or unknown multicast destination match flag.
In terms of RTE flow API, this would require adding multiple flow rules
with corresponding ETH items besides the tunnel item. In order to avoid
such a complication, the patch implements a mechanism to auto-complete
an underlying filter representation of a flow rule in order to create
additional filter specifications featuring the missing match flags.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Hardware filter specification for encapsulated traffic must contain
EtherType. In terms of RTE flow API, this would require L3 item to be
used in the flow rule. In the simplest case, if the user needs to filter
encapsulated traffic without knowledge of exact EtherType, they will
have to create multiple variants of the flow rule featuring all possible
L3 items (IPv4, IPv6), respectively. In order to hide the gory details
and avoid such a complication, this patch implements a mechanism to
auto-complete the filter specifications if need be.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Not all flow rules can be expressed in one hardware filter, so some flow
rules have to be expressed in terms of multiple hardware filters. This
patch provides a means to produce a filter spec template from the flow
rule which then can be used to produce a set of fully elaborated specs
to be inserted.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Support destination MAC address match in inner frames.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Exact match of virtual network identifier is supported by parser.
IP protocol match are enforced to UDP.
Only Ethernet protocol type is supported.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Exact match of virtual subnet ID is supported by parser.
IP protocol match are enforced to GRE.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Exact match of VXLAN network identifier is supported by parser.
IP protocol match are enforced to UDP.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Add filter match flag to distinguish filters applied only to
encapsulated packets.
Match flags set should allow to determine whether a filter
is supported or not. The problem is that if specification
has supported set outer match flags and specified
encapsulation without any inner flags, check says that it
is supported, and filter insertion is performed. However,
there is no filtering of the encapsulated traffic. A new
flag is added to solve this problem and separate the
filters for the encapsulated packets.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Mark Spender <mspender@solarflare.com>
This supports VNI/VSID and inner frame local MAC fields to
match in VXLAN, GENEVE, or NVGRE packets.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
This adds filters for encapsulated packets to the list
returned by ef10_filter_supported_filters().
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Regenerate MCDI and TLV layout headers from firmwaresrc to
pick up DPDK firmware variant and related Rx queue and filtering
extensions.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Set outer_ip_id in the TX option descriptor for encapsulated packets.
Signed-off-by: Vijay Srivastava <vijays@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Document the TX_EV_TYPE used for TX completion events corresponding
to CTPIO sends.
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Either cut-through or store-and-forward mode.
Signed-off-by: Guido Barzini <gbarzini@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
New port mode names are defined for Medford2 and later, and
the existing names are aliased to them. Add comments with the
numeric port mode to clarify the external port modes table.
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The event timer interface has changed for Medford2 - for
details see bug66418 comment 9. Update the common code to
use the new timer semantics for Medford2.
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Medford2 controllers support control and reporting of
FEC modes for 25G and higher links. See SF-109306-TC
for suggested usage in client code.
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
