A backend which a driver employs to handle flow rules of a given
type depends on the underlying NIC flow engine. The driver in
question in its current state is tailored to support the only
flow engine, VNIC filtering. As the need arises to add support
for transfer rules, the driver has to be reworked so that it
becomes possible to introduce yet another backend.
As a preparation step, make the flow list shared
between different engines.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The flow specification structure will be transformed to a generic one, and
its current contents will be fenced off to form a VNIC-specific parameters.
Flow RSS details do not belong to the said specification currently, albeit
being VNIC-specific. This patch addresses this issue as a preparation step.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Implement eth_dev_ops uc_hash_table_set and uc_all_hash_table_set
Signed-off-by: Chandu Babu N <chandu@amd.com>
Acked-by: Ravi Kumar <ravi1.kumar@amd.com>
Supports adding MAC addresses to enable whitelist filtering to
accept packets
implement eth_dev_ops mac_addr_set, mac_addr_add, mac_addr_remove and
set_mc_addr_list
Signed-off-by: Chandu Babu N <chandu@amd.com>
Acked-by: Ravi Kumar <ravi1.kumar@amd.com>
Stopping LLDP is necessary for DPDK, but it will cause DCB init failure.
For kernel shared code, the prerequisite for successful initialization
of DCB is that LLDP is enabled. This patch starts LLDP before DCB init
and stops it when init finishes.
Fixes: a8e84b22bd ("net/i40e/base: support persistent LLDP")
Cc: stable@dpdk.org
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
NIC deinitialization should not happen after a failed NIC
initialization.
Fixes: 91831d4068 ("net/sfc: estimate available resources")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
When calling to setup RSS on v4 API, ESX will expect
IPv4/6 TCP RSS to be set/requested mandatory.
This patch will:
- Set IPv4/6 TCP RSS when these have not been set. A warning
message is thrown to make sure we warn the application we are
setting IPv4/6 TCP RSS when not set.
- An additional check has been added to dodge RSS configuration
altogether unless MQ_RSS has been requested, similar to v3.
The alternative (returning error) was considered, the intent
is to ease the task of setting up and running vmxnet3 in situations
where it's supposed to be most straightforward (testpmd, pktgen).
Bugzilla ID: 400
Fixes: 643fba7707 ("net/vmxnet3: add v4 boot and guest UDP RSS config")
Cc: stable@dpdk.org
Signed-off-by: Eduard Serra <eserra@vmware.com>
Acked-by: Yong Wang <yongwang@vmware.com>
Requested promiscuous or all-multicast mode may be dropped on port
start if FW denies to enable it (e.g. because of no permission
in the case of VF). Return applied value on get.
Fixes: f5258439ee ("net/sfc: avoid failure on port start if Rx mode is rejected")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Supporting more than 2 sub-device is a remnant from earlier fail-safe
design, that was never actually published.
Fixes: a46f8d584e ("net/failsafe: add fail-safe PMD")
Cc: stable@dpdk.org
Signed-off-by: Gaetan Rivet <grive@u256.net>
Reading the fail-safe doc with a few years added, a few phrasing
choices are ambiguous or confusing.
Signed-off-by: Gaetan Rivet <grive@u256.net>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Remove unnecessary variable "meta" in ice_flow_create and
ice_flow_validate, it should be defined when really needed:
its ice_parse_engine_create and ice_parse_engine_validate.
A meta data created by parser->parse_pattern_action should be
freed inside parser->engine->create.
During a validate operation, since parser->engine_>create will not
be invoked, it is unnecessary to create a meta during parser, so
NULL will passed to engine->parse_pattern_action and all parser's
parse_pattern_action need to be modified to handle meta = NULL
properly.
With above implementation, the patch also fixes a potential memory
leak in ice_parse_engine_validate, since meta may not be freed.
BTW, an engine without a create op should be regarded as a bug. So
use RTE_ASSERT to replace runtime engine->create == NULL check in
ice_parse_engine_create.
Fixes: 4e27d3ed02 ("net/ice: fix flow API framework")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
This was left to its default value. With the patch transactions are:
- coherent,
- do not allocate in downstream cache (there is none on LS1028a),
- merge surrounding data for BD writes,
- overwrite surrounding data for frame data writes.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Acked-by: Gagandeep Singh <g.singh@nxp.com>
LS1028A does not have platform cache so any reads following a hardware
write will go directly to DDR. Latency of such a read is in excess of
100 core cycles, so try to prefetch more in advance to mitigate this.
How much is worth prefetching really depends on traffic conditions.
With congested Rx this could go up to 4 cache lines or so. But if
software keeps up with hardware and follows behind Rx PI by a cache line
then it's harmful in terms of performance to cache more. We would only
prefetch data that's yet to be written by ENETC, which will be evicted
again anyway.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Acked-by: Gagandeep Singh <g.singh@nxp.com>
Use rte_pktmbuf_free_bulk to release all mbufs at once. This is flagged
as obsolete/not yet stable in DPDK but seems to be functional.
Don't count the released frames, it's no longer needed in the caller.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Acked-by: Gagandeep Singh <g.singh@nxp.com>
Since we know in advance that we're going to fill in multiple
descriptors it's convenient to allocate the buffers in batches.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Acked-by: Gagandeep Singh <g.singh@nxp.com>
Reorder the members of the structure so that the ones used on datapath
fit in a single cache line, to slightly reduce pressure on cache and
miss rate.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Acked-by: Gagandeep Singh <g.singh@nxp.com>
Move from doing batch refill of Rx ring from bundles of 8 to once per
enetc_clean_rx_ring call. One benefit is that we're cleaning up all the
BDs that we just processed, which should still be cached. The other is
that hardware Rx index stays a little back and doesn't cause contention
on the BDs processed in the Rx loop.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Acked-by: Gagandeep Singh <g.singh@nxp.com>
The default value in hardware for the Rx MAC FIFO (@) is higher than it
should be and can lead to Rx lock-up under traffic.
Set it to the value recommended by hardware team, 1.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Each call to enetc_clean_tx_ring will cost at least 150-200 CPU cycles
even if no clean-up is done, due to the CI register read.
We're only calling it once at the end of the function, on the assumption
that software is slower than hardware and hardware completed sending
older frames out by now.
We're also cleaning up the ring before kicking off Tx for the new batch
to minimize chances of contention on the Tx ring.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Acked-by: Gagandeep Singh <g.singh@nxp.com>
We don't need barriers here since this read doesn't have to be strictly
serialized in relation to other surrounding memory/register accesses.
We only want a reasonably recent value out of hardware so we know how
much we can clean.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Acked-by: Gagandeep Singh <g.singh@nxp.com>
Don't read the hardware CI register in a loop, read it once, clean up
and exit.
The issue with reading the register in a loop is that we're stalling
here trying to catch up with hardware which keeps sending traffic as
long as it has traffic to send, so in effect we could be waiting here
for the Tx ring to be drained by hardware, instead of us doing Rx in
that meantime.
At the time we return the function there may be new BDs in the ring that
could be cleaned, we're just leaving those there for the next time.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Acked-by: Gagandeep Singh <g.singh@nxp.com>
Driver destroys the VNIC when the port is brought down.
Port HW filter setting such as default MAC address and
unicast MAC filters will be applied when port is started.
Fixed to return success silently for these callbacks
when port is stopped.
Fixes: 39b88344e3 ("net/bnxt: fix enable/disable VLAN filtering")
Cc: stable@dpdk.org
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
There is a race condition when port is closed while error recovery
is happening in driver. Fixed this by canceling the recovery threads
during port close.
Fixes: df6cd7c1f7 ("net/bnxt: handle reset notify async event from FW")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Commit 'dc36bd5dfdeb' mistakenly initializes ret as -rte_errno, then
return ret if ice_search_pattern_match_item fails, if rte_errno happens
to be 0 in this case, it would cause an unrecognized flow rule to be
marked as recognition success. Later, when the code tries to parse the
flow rule, a segmentation fault will occur due to null pointer
reference.
Fixes: dc36bd5dfd ("net/ice: fix flow FDIR/switch memory leak")
Cc: stable@dpdk.org
Signed-off-by: Tao Zhu <taox.zhu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Lack of GL_SWR_PM_UP_THR value for mac type 4x10G X722 caused it can't
reach line rate in one queue one core forwarding case. It's about 1%
performance drop. This patch adds value as:
Device-ID Value Comments
0x37D0 0x03030303 4x10G FPK
This value is hardware specific.
Fixes: 3320d4a240 ("net/i40e: workaround performance degradation")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Since qpairs is part of the vdev arguments, there is no need to
limit it to 16. The queue arrays can be dynamically sized based
on the requested parameters.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: John W. Linville <linville@tuxdriver.com>
Add AH and AH SPI to testpmd rte flow command line.
Add note and sample AH rules in testpmd guide.
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
The VLAN 16 bits tci field contains both values of PCP and VID. When
extracting any one of them - it is required not to affect the other one.
Previous to this commit in routine flow_dev_get_vlan_info_from_items()
we calculated the PCP as follows:
(1) vlan->vlan_tci &= MLX5DV_FLOW_VLAN_PCP_MASK;
(2) vlan->vlan_tci |= <3 bits value of PCP>
In line (1) we should have used the negated mask ('~' operator) such
that only the PCP bits will be nullified before ORing them with the
updated PCP value.
Fixes: 9aee7a8418 ("net/mlx5: support push flow action on VLAN header")
Cc: stable@dpdk.org
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
If configuring VF promiscuous mode is not supported, return '-ENOTSUP'
error code in '.promiscuous_enable/disable' dev_ops.
This is to fix the port start during config restore, where if
'.promiscuous_enable/disable' dev_ops exists and return any value other
than '-ENOTSUP', start will fail.
Same is done for '.allmulticast_enable/disable' dev_ops.
Fixes: ddc7cb0d94 ("net/i40e: re-program promiscuous mode on VF interface")
Cc: stable@dpdk.org
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add support for .set_link_up/down() eth ops to bring
link up and down.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Loopback devices are exposed as ethdev device in octeontx2.
This patch fixes the link information for loopback ports.
Fixes: 38f566280a ("net/octeontx2: add link stats operations")
Cc: stable@dpdk.org
Signed-off-by: Ashish Gupta <ashishg@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Since packet is talking to a network device (probably tap)
it is possible for the device driver to change the hardware address
by making an ioctl to kernel.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Clang on Windows doesn't use pthread for now, while MinGW does. Removing
`-pthread` option with MS linker fixes the following warning:
clang: warning: argument unused during compilation: '-pthread'
[-Wunused-command-line-argument]
Option `--no-as-needed` is meaningless for PE output. Disabling it on
Windows fixes the following warning:
LINK : warning LNK4044: unrecognized option '/-no-as-needed'; ignored
Fixes: 98edcbb5a ("eal/windows: introduce Windows support")
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: William Tu <u9012063@gmail.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
Acked-by: Pallavi Kadam <pallavi.kadam@intel.com>
Add Meson configuration to cross-compile for Windows using MinGW-w64.
It may require adjustments in some cases, but at least it provides
the foundation.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: William Tu <u9012063@gmail.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
MinGW-w64 linker does not mimic MS linker options, so the build system
must differentiate between linkers on Windows. Use GNU linker options
with GCC and MS linker options with Clang.
MinGW-w64 by default uses MSVCRT stdio, which does not comply to ANSI,
most notably its formatting and string handling functions. MinGW-w64
support for the Universal CRT (UCRT) is ongoing, but the toolchain
provides its own standard-complying implementation of stdio. The latter
is used in the patch to support formatting in DPDK.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: William Tu <u9012063@gmail.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
Disable bundled getopt implementation and GNU extensions shim when
building in GNU environment.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: William Tu <u9012063@gmail.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
Acked-by: Pallavi Kadam <pallavi.kadam@intel.com>
Mixed case in Windows header names causes errors when cross-compiling
from Linux with case-sensitive filesystem using MinGW, because MinGW
distribution provides all platform SDK headers in lowercase. The change
does not affect Windows native builds on case-insensitive filesystems
(NTFS default).
Reported-by: Narcisa Vasile <navasile@microsoft.com>
Reported-by: William Tu <u9012063@gmail.com>
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: William Tu <u9012063@gmail.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
Acked-by: Pallavi Kadam <pallavi.kadam@intel.com>
When using __attribute__((format(...)) on functions, GCC on Windows
assumes MS-specific format string by default, even if the underlying
stdio implementation is ANSI-compliant (either MS Unicersal CRT
or MinGW implementation). Wrap attribute into a macro that forces
GNU-specific format string when using GCC.
Use this new attribute for logging and panic messages in EAL
and for output strings in cmdline library.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: William Tu <u9012063@gmail.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
RTE_TOOLCHAIN_* macros are defining the target compiler.
Some API may be used in a host application like pmdinfogen.
That's why the the public headers should check the effective compiler
in use instead of the target compiler.
Detecting the compiler with macros is easy, except for __GNUC__
which is defined in all compilers supporting some GNU compatibility.
It is improved by defining RTE_CC_CLANG, RTE_CC_ICC and RTE_CC_GCC.
The extra macro RTE_CC_IS_GNU is defined to 0 or 1 in GCC case,
so it can be used simply with #if.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
The include file rte_debug.h is pulled into x86 builds through the
following callchain:
lib/librte_eal/common/include/generic/rte_cycles.h:17,
lib/librte_eal/common/include/arch/x86/rte_cycles.h:13,
lib/librte_eal/common/include/arch/x86/rte_spinlock.h:18,
lib/librte_eal/common/include/arch/x86/rte_rwlock.h:13,
The PPC specific version of the same callchain does not include
rte_debug.h. Add rte_debug.h back into the C files that require it.
Fixes: 0dcba52562 ("pci: remove unneeded includes in public header file")
Cc: stable@dpdk.org
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Tested-by: David Wilder <dwilder@us.ibm.com>
Acked-by: David Marchand <david.marchand@redhat.com>
When removing the extra headers from rte_pci.h stdlib should have been
removed instead of stdio, since off_t is missing for BSD builds when just
including stdlib.h
Fixes: 0dcba52562 ("pci: remove unneeded includes in public header file")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The rte_pci.h file includes more header files than are actually needed,
which means that all users of it also include those headers. This patch
removes the unneeded headers - adding them elsewhere where other components
were requiring them but not including them directly.
Fixes: c752998b5e ("pci: introduce library and driver")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The ep struct is used to track what type of stats are required by the
client. For PORT_STATS type, it contains the lists of port and metric
ids to query, and the number of ids in each list.
The ep struct has values set (num of port and metric ids) when a request
for port stats values by name is received. However, after this value
assignment, the struct is reset to all 0 values, meaning the number of
port and metric ids required now both show as 0, and the client will not
receive the requested data in response. To fix this issue, the memset
call is now moved above the ep struct value assignment.
Fixes: 4080e46c80 ("telemetry: support global metrics")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
This commit releases all service cores from their role,
returning them to ROLE_RTE on rte_service_finalize().
This fixes an issue relating to the service cores causing
a race-condition on rte_eal_cleanup(), where the service core
could still be executing while the main thread has already
free-d the service memory, leading to a segfault.
Fixes: da23f0aa87 ("service: fix memory leak with new function")
Cc: stable@dpdk.org
Reported-by: David Marchand <david.marchand@redhat.com>
Reported-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
When the memory allocator reserves virtual addresses, it still does not
know what they will be used for.
Besides, huge areas are reserved for memory hotplug in multiprocess
setups. But most of the pages are unused in the whole life of the
processes.
Change protection mode to PROT_NONE when only reserving VA.
The memory allocator already switches to the right mode when making use
of it.
It also has the nice effect of getting those pages skipped by the kernel
when calling mlockall() or when a coredump gets generated.
Cc: stable@dpdk.org
Suggested-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
In order to get more accurate the cntvct_el0 reading,
SW must invoke isb.
Fixes: ccad39ea07 ("eal/arm: add cpu cycle operations for ARMv8")
Cc: stable@dpdk.org
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Haifeng Lin <haifeng.lin@huawei.com>
