The list of libraries in LDLIBS was generated from the DEPDIRS-xyz
variable. This is valid when the subdirectory name match the library
name, but it's not always the case, especially for PMDs.
The patches removes this feature and explicitly adds the proper
libraries in LDLIBS.
Some DEPDIRS-xyz variables become useless, remove them.
Reported-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
port_id in struct lio_device should be increased range to uint16_t since
port id in rte_eth_dev_data has already been defined as uint16_t.
Fixes: f8244c6399 ("ethdev: increase port id range")
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
The stats_get dev op API doesn't include return value, so PMD cannot
return an error in case of failure at stats getting process time.
Since PCI devices can be removed and there is a time between the
physical removal to the RMV interrupt, the user may get invalid stats
without any indication.
This patch changes the stats_get API return value to be int instead of
void.
All the net PMDs stats_get dev ops are adjusted by this patch.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In func lio_dev_link_update(), "link.link_autoneg" is used in func call
lio_dev_atomic_write_link_status(), but it is uninitialized.
Fixes: 3766020513 ("net/liquidio: add APIs to start device and update link")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Support MTU change in the range ETHER_MIN_MTU to PF_MTU. A drop in PF
MTU lowers VF MTU if it goes out of range.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
igb_uio and vfio-pci does pci reset during open and release of device.
So FLR request to LiquidIO PF driver during init and close in PMD is not
required.
See commit b58eedfc7d ("igb_uio: issue FLR during open and release of
device file")
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Avoid re-initializing of mbuf fields which are set while in pool.
Replaced lio_recv_buffer_alloc with rte_pktmbuf_alloc.
See commit 8f094a9ac5 ("mbuf: set mbuf fields while in pool").
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
max_rx_pkt_len member of port RX configuration indicates max frame
length. Ethernet header and CRC length should be subtracted from it to
find MTU.
Fixes: 605164c8e7 ("net/liquidio: add API to validate VF MTU")
Cc: stable@dpdk.org
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Add subsystem device id of CN23xx cards and expose speed capability of
devices. Update liquidio feature file to mark support.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Instead of many PMD define their own macro, define a generic one in
ethdev and use that in PMDs.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
vfio is the kernel framework used by the vfio-pci kernel driver.
DPDK drivers do not rely solely on vfio, but rather on vfio-pci to gain
access to pci resources.
Fixes: 0880c40113 ("drivers: advertise kmod dependencies in pmdinfo")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add case to handle 25G link speed and thereby support
LiquidIO II CN23XX 225SV (2x25G) adapter.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Initialize mail box command to request VF FLR. Data field was
uninitialized before as it was not required and caused the following
error during scan.
Coverity issue: 1384518
Fixes: cdb166963c ("net/liquidio: add API for VF FLR")
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Add APIs to setup and free Scatter-Gather list. SG list is used while
sending packets with multiple segments.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Venkat Koppula <venkat.koppula@caviumnetworks.com>
Signed-off-by: Srisivasubramanian S <ssrinivasan@caviumnetworks.com>
Signed-off-by: Mallesham Jatharakonda <mjatharakonda@oneconvergence.com>
Add API to send control and data packets to device. Request list keeps
track of host buffers to be freed till it reaches device.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Venkat Koppula <venkat.koppula@caviumnetworks.com>
Signed-off-by: Srisivasubramanian S <ssrinivasan@caviumnetworks.com>
Signed-off-by: Mallesham Jatharakonda <mjatharakonda@oneconvergence.com>
Add APIs to setup and process response list. Response list holds soft
commands waiting for response from device. Entries of this list are
processed to check for command response or timeout.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Venkat Koppula <venkat.koppula@caviumnetworks.com>
Signed-off-by: Srisivasubramanian S <ssrinivasan@caviumnetworks.com>
Signed-off-by: Mallesham Jatharakonda <mjatharakonda@oneconvergence.com>
Get buffers from SC buffer pool and create soft command. Buffers are
freed to the pool once the command reaches device.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Venkat Koppula <venkat.koppula@caviumnetworks.com>
Signed-off-by: Srisivasubramanian S <ssrinivasan@caviumnetworks.com>
Signed-off-by: Mallesham Jatharakonda <mjatharakonda@oneconvergence.com>
Soft command (SC) holds device control command and related information.
SC buffer pool holds buffers which are used during soft command
allocation.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Venkat Koppula <venkat.koppula@caviumnetworks.com>
Signed-off-by: Srisivasubramanian S <ssrinivasan@caviumnetworks.com>
Signed-off-by: Mallesham Jatharakonda <mjatharakonda@oneconvergence.com>
Instruction queue (IQ) is used to send control and data packets to
device from host. IQ 0 is used to send device configuration commands
during initialization and later re-allocated as per application
requirement.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Venkat Koppula <venkat.koppula@caviumnetworks.com>
Signed-off-by: Srisivasubramanian S <ssrinivasan@caviumnetworks.com>
Signed-off-by: Mallesham Jatharakonda <mjatharakonda@oneconvergence.com>
VF sends Function Level Reset request to PF using mbox and PF does the
reset.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Venkat Koppula <venkat.koppula@caviumnetworks.com>
Signed-off-by: Srisivasubramanian S <ssrinivasan@caviumnetworks.com>
Signed-off-by: Mallesham Jatharakonda <mjatharakonda@oneconvergence.com>
Add debug options to config file. Define macros used for log and make
use of config file options to enable them.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Venkat Koppula <venkat.koppula@caviumnetworks.com>
Signed-off-by: Srisivasubramanian S <ssrinivasan@caviumnetworks.com>
Signed-off-by: Mallesham Jatharakonda <mjatharakonda@oneconvergence.com>
