Base on HW, if a packet is split into multiple segments, the L2TAG
should only be valid on the last Rx descriptor. So fix it by setting
L2TAG into mbuf when processing the last split packet.
Fixes: 319c421f38 ("net/avf: enable SSE Rx Tx")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Base on HW, if a packet is split into multiple segments, the L2TAG
should only be valid on the last Rx descriptor. So fix it by setting
L2TAG into mbuf when processing the last split packet.
Fixes: ca74903b75 ("net/i40e: extract non-x86 specific code from vector driver")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Recent patch exposed a minor performance issue,
so it is reverted.
Fixes: d237d22fbe ("net/mlx5: prefer DevX API to create Rx objects")
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
When user requests a filter deletion only filter with
manual priority must be deleted. When an automatic filter has
the same specification, it must be skipped.
Fixes: 585c22edb2 ("net/sfc/base: handle manual and auto filter clashes in EF10")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
When TSO MSS is smaller than 80, and the sum length of continuous
sge num is larger than a MSS, which may cause hardware failed,
so in this scenarios pmd driver should adjust the tso_segsz with
the same with the value of hardware supported.
Fixes: 076221c8fe ("net/hinic: add Rx/Tx")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
The elt_size field in mempool holds the size of one packet buffer.
It can be used to set the lpm_sizem1 field in rq context.
The lpb_sizem1 field in rq context is 12 bit, direct assignment
to it was causing overflow of value. Because of this errors
were observed while trying inline inbound with large packets.
This patch resolves the errors.
Fixes: 094fc8a3a1 ("net/octeontx2: add Rx queue setup and release")
Cc: stable@dpdk.org
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Reviewed-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
When a queue is started after deferred_start, then increment raw_prod
irrespective of new mbuf is allocated or old mbufs are used.
Fixes: d256c73c11 ("net/bnxt: fix memory leak during queue restart")
Cc: stable@dpdk.org
Signed-off-by: Rahul Gupta <rahul.gupta@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
FDIR ID parsing will not be handled correctly after queue reconfigured,
enable FDIR ID parsing per Q regardless of fdir_ref_cnt to fix it.
Fixes: f71dbf852d ("net/iavf: add flow director enabled switch value")
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Use a common function when selecting the proper word and mask match for
a tunnel type when programming switch rules.
Store switch recipe field mask as little endian, which avoids needing to
convert back to big endian after reading recipe from FW.
Obtain word mask from FW recipe.
Fix word matching element and index pairing.
Fixes: fed0c5ca5f ("net/ice/base: support programming a new switch recipe")
Cc: stable@dpdk.org
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
GCC 10 is detecting the enum mismatch when assigning UDP variables
with MUSDK constants for TCP.
drivers/net/mvpp2/mrvl_flow.c:2521:47: error: implicit conversion
from 'enum mv_net_tcp_fields' to 'enum mv_net_udp_fields'
[-Werror=enum-conversion]
An assigned field is also fixed from "tcp" to "udp".
Fixes: 7235341d75 ("net/mrvl: support classifier")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Liron Himi <lironh@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Since there are some default rss configure in kernel PF/VF but not DPDK
IAVF, if these configurations be modified by VF and then VF reset, this
default rss configurations can not be reset to default by IAVF. So need
to add default rss set in IAVF hash initial process.
Fixes: 7be10c3004 ("net/iavf: add RSS configuration for VF")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Zhiwei He <zhiwei.he@intel.com>
There should have different behavior in queue start fail and stop fail
case. When queue start fail, all the next actions should be terminated
and then started queues should be cleared. But for queue stop stage, one
queue stop fail should not end other queues stop. This patch fixed that
issue in PF and VF.
Fixes: b6583ee402 ("i40e: full VMDQ pools support")
Fixes: 3f6a696f10 ("i40evf: queue start and stop")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
All supported pattern for GTPU include extend header:
pattern_eth_ipv4_gtpu_eh_ipv4
pattern_eth_ipv4_gtpu_eh_ipv4_udp
pattern_eth_ipv4_gtpu_eh_ipv4_tcp
So the RSS rule should only take effect on GTPU packet that contains
extend header. The patch fix above issue and also allow inner l4 port
as input set.
Fixes: c08a72c79c ("net/ice: fix pattern name of GTPU with extension header")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Tested-by: Simei Su <simei.su@intel.com>
In i40e PMD code of function i40e_res_pool_free(), if valid_entry
is freed by "rte_free(valid_entry);" in the code, then the following
code for pool update may still use the wild pointer "valid_entry"
for pool info update. It seems has the risk of core dump for
using wild pointer operation, we should avoid this risk.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Reviewed-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add device arguments to lock NPA aura and pool contexts in NDC cache.
The device args take hexadecimal bitmask where each bit represent the
corresponding aura/pool id.
Example:
-w 0002:02:00.0,npa_lock_mask=0xf // Lock first 4 aura/pool ctx
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Removed the typing error in doc/guides/eventdevs/index.rst,
drivers/net/mlx5/mlx5.c and in lib/librte_vhost/rte_vhost.h
Bugzilla ID: 477
Fixes: 0857b94211 ("doc: add event device and software eventdev")
Fixes: 039253166a ("vhost: add device op when notification to guest is sent")
Fixes: ad74bc6195 ("net/mlx5: support multiport IB device during probing")
Cc: stable@dpdk.org
Signed-off-by: Muhammad Bilal <m.bilal@emumba.com>
Currently rte_mcp_ptr_list is being shared as a variable
across libs. This is only used in control path.
This patch change it to a exported function based access.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This patch changes the export of fman port config
as function call instead of direct variable access.
This is in control path, so it will not impact perf.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This is to reduce the number of variables getting exposed
from the dpaa bus. They are not required to be in bus.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch moves the internal symbols to INTERNAL sections
so that any change in them is not reported as ABI breakage.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Clarify Intel copyright and update the date to 2020.
Fixes: 8cb7c57d9b ("net/igc: support device initialization")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Clarify Intel copyright and update the date to 2020.
Fixes: 547be3f01f ("net/i40e/base: replace license text with SPDX tag")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Clarify Intel copyright and update the date to 2020.
Fixes: 9db3087f4f ("net/ixgbe/base: update the license")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
After memory optimization, the organization of some resources are
changed from pointer based LIST to the index based ILIST. A lot of
code parts are touched due to such change.
Some static code checking and analysis tool will complain and raise
a false warning on the uninitialized value using. E.g. in the port
action registering function, the stack variable will be used as the
right value with some uninitialized field to initialize variable
allocated from heap. But indeed, it is not an error because all the
fields set with the uninitialized value will be overwritten in the
following code part and the macros. All the fields will be used as
the left value explicitly.
It makes no sense to clear the stack variable to 0 in this case,
and the extra memset will introduce some cycles overhead. It just
needs to ignore the false warning from the tool, if any.
Fixes: f3faf9ea11 ("net/mlx5: convert port id action to indexed")
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Reviewed-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
After memory optimization, some action object handles are changed to
index to save the overhead. Assertion in debug mode will be helpful
for trouble shooting.
In the current implementation, only one port action is supported in
switchdev mode for one device flow. In debug mode, an assertion will
be used to check the if the port action is none, and it should
locate before the port action resource registration but not after
it. The action index in the handle should be 0 before registration.
Or else it will always cause a failure because the port action is
registered and the index is not 0.
Fixes: f3faf9ea11 ("net/mlx5: convert port id action to indexed")
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Reviewed-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Currently, the shared counter search uses the wrong nested index which
is used by the pool index. The incorrect nested index using causes the
search go to incorrect counter pool is not existed.
Add the counter index to fix the incorrect nested use case.
Fixes: 4001d7ad26 ("net/mlx5: change Direct Verbs counter to indexed")
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The doorbell record is organized with page and bitmap. When some new
doorbell needs to be associated with a queue, the bit will be set
in the bitmap to indicate the corresponding doorbell occupied. A
counter is used to record the number of doorbell occupied to speed
up the searching.
If the number reaches the maximal value of a pre-defined number of a
page, a new page will be allocated. If not, then the bitmap will be
checked to find a free one.
The LSHIFT and OR (AND NOT) operations are used to update the bitmap
of a page. But 1 will be treated as a signed integer when compiling.
When the shift number is 31, the shifted value will be considered as
negative. Then a wrong extension will be done when setting it to a
64-bits variable. All the upper 32-bits will be set to 1 by such
extension.
Then a wrong offset value will be calculated because of this. The
next 64 bits will be also treated as the bitmap and get corrupted
through the bit set operation.
The immediate value 1 needs to be used as 64 bits width explicitly.
Fixes: 21cae8580f ("net/mlx5: allocate door-bells via DevX")
Cc: stable@dpdk.org
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
When create the Verbs flows with counter, randomly SEGSEV will also
comes. The reason is that the counter pool memory is not allocated
sufficiently and initialized correctly in Verbs case.
As the mlx5_flow_counter array member is moved out of the counter pool
struct, the counter pool memory layout currently contain implicitly
with mlx5_flow_counter, mlx5_age_param(if the pool is an age pool),
mlx5_flow_counter_ext(if the pool is a none batch pool). When allocate
the pool memory, the pool size should be calculated based on the pool
type accordingly.
Currently, for Verbs counter pool, both mlx5_flow_counter and
mlx5_flow_counter_ext need to be taken into account in the pool size.
And the pool type should also be initialized as CNT_POOL_TYPE_EXT.
This patch add the missing size and type for the Verbs counter pool.
Fixes: 8d93c830e4 ("net/mlx5: modify ext-counter memory allocation")
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
CVL kernel PF configures all reserved queues for VF, including
Rx queue RXDID. The number of reserved queues is the maximum
between Tx and Rx queues. If the number of the enabled Rx queues
is less than that of reserved queues, required RXDID will only
be set for those enabled, but default value (0) is set for others.
However, RXDID 0 (legacy 16byte descriptor) is not supported now,
PF will return error when configuring those disabled VF queues.
In this patch, required RXDID is set for all reserved Rx queues,
no matter enabled or not. In this way, PF will configure Rx
queues correctly without reporting error.
Fixes: b8b4c54ef9 ("net/iavf: support flexible Rx descriptor in normal path")
Signed-off-by: Ting Xu <ting.xu@intel.com>
Tested-by: Xiaoxiao Zeng <xiaoxiaox.zeng@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
This patch fixes the issue that the queue region does not
take effect due to incorrectly setting the flow type.
Fixes: ecad87d223 ("net/i40e: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Reviewed-by: Jeff Guo <jia.guo@intel.com>
Tested-by: Hailin Xu <hailinx.xu@intel.com>
Tested-by: Lunyuan Cui <lunyuanx.cui@intel.com>
This patch adds support for FDIR passthrough mode. When FDIR rule
hits, FDIR just forward this packet to the next stage filter.
Fixes: 55daca4e45 ("net/ice/base: change function to static")
Signed-off-by: Simei Su <simei.su@intel.com>
Tested-by: Xiaoxiao Zeng <xiaoxiaox.zeng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Fix to allocate bnxt ulp context when TRUFLOW is enabled.
This patch reduces the size of struct bnxt.
Fixes: 313ac35ac7 ("net/bnxt: support ULP session manager init")
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are maintaining MAC address twice which is unnecessary.
This patch removes the copy which helps reduce size of bnxt structure.
Fixes: b7778e8a1c ("net/bnxt: refactor to properly allocate resources for PF/VF")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
There is no need to maintain local copy.
This helps reduce the size of the bnxt structure.
Fixes: fcc0aa1edc ("net/bnxt: add RSS hash configuration")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Consolidate flow stat related structs for performance improvement.
The intention of this patch is to reduce the size struct bnxt which
had grown because of recent changes and was impacting performance.
Fixes: 02a95625fe ("net/bnxt: add flow stats in extended stats")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Log the command sequence number to aid debug in case of a
FW command timeout.
Fixes: 804e746c7b ("net/bnxt: add hardware resource manager init code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
This patch fixes deallocation of all fastpath resources unconditionally,
when re-configuring the device. When re-allocating resources PMD depends
on application to explicitly setup the Rx/Tx queue.
Deallocation of all the resources is only required if the Rx/Tx queue
configuration changes. For other scenarios like KNI MTU change we'd keep
existing configuration.
Fixes: 8de0c42019 ("net/qede: fix odd number of queues usage in 100G mode")
Fixes: dd28bc8c6e ("net/qede: fix VF port creation sequence")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Fix to assign dummy Rx/Tx handlers in dev_stop.
For MTU set, assignment of the appropriate Rx/Tx handlers will be
handled by dev_start/dev_stop.
Fixes: 81f8804992 ("net/qede: enhance Rx CPU utilization")
Fixes: 8de0c42019 ("net/qede: fix odd number of queues usage in 100G mode")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Event notification should be disabled after virtqueue initialization and
enabled by calling rte_eth_dev_rx_intr_enable later. When virtio user
device reconnecting to vhost, virtqueue_disable_intr should be called to
disable event notification.
Fixes: 6ebbf4109f ("net/virtio-user: fix packed ring server mode")
Cc: stable@dpdk.org
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Runtime checks for vectorized datapath are organized into device
configuration function. Remove duplicated check in device init
function.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Before updating RSS indirection table, firstly determine whether
rq num in RETA table is legal, if it is invalid(such as exceeding
the maximum rxq num), driver will not update hw indirection
table and return fail.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
The patch modifies the comments of structures or functions, and adds
space for comments, removes extra empty lines and adjusts the
print level for VF branches in one sdk interface.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
When copy a mbuf to a new dst_mbuf, the pkt_len member of
dst_mbuf needs to be updated.
Fixes: 076221c8fe ("net/hinic: add Rx/Tx")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Adds tx_queues and rx_queues non-null judgment before free tx or
rx resources, because some app may set tx_queues or rx_queues to
be null before call free resource interfaces, which may cause
a segfault.
Fixes: 64727024d2 ("net/hinic: add device initialization")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
