Added macro to print six bytes of MAC address.
The MAC addresses will be printed in upper case
hexadecimal format.
In case there is a specific check for lower case
MAC address, the user may need to make a change in
such test case after this patch.
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since meson 0.59.0 version, the extract_all_objects() API
need to pass explicit boolean value.
To remove the following warning[1], added explicit `true` for
extract_all_objects() use in codebase whever there is
no argument.
[1]
WARNING: extract_all_objects called without setting recursive
keyword argument. Meson currently defaults to
non-recursive to maintain backward compatibility but
the default will be changed in the future.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
On some hardware units it was found this trace is flooding the output,
making any dpdk interactive usage kind of problematic.
It is only informational, without any consequences handling, so reducing
it to verbose from explicit notice level.
Cc: stable@dpdk.org
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Acked-by: Devendra Singh Rawat <dsinghrawat@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Replace master lcore with main lcore and
replace slave lcore with worker lcore.
Keep the old functions and macros but mark them as deprecated
for this release.
The "--master-lcore" command line option is also deprecated
and any usage will print a warning and use "--main-lcore"
as replacement.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The ethdev port id should be 16 bits now. This patch changes the
variable size of port id in some net drivers from 8 bits to 16
bits.
Fixes: 09b23f8b9d ("net/bnxt: fix port stop process and cleanup resources")
Fixes: 769de16872 ("net/bnxt: fix port default rule create/destroy")
Fixes: 50370662b7 ("net/ice: support device and queue ops")
Fixes: a50d7cbbda ("net/qede: support registers dump")
Cc: stable@dpdk.org
Signed-off-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds required bit to handle VF FLR
indication from Management FW (MFW) of the device
With that VFs were able to load in VM (VF attached as PCI
passthrough to the guest VM) followed by FLR successfully
Updated the docs/guides with the feature support
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Rasesh Mody <rmody@marvell.com>
This patch adds necessary infrastructure support (required to handle
messages from VF and sending ramrod on behalf of VF's configuration
request from alarm handler context) to start/load the VF-PMD driver
instance on top of PF-PMD driver instance.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Rasesh Mody <rmody@marvell.com>
This patch defines various PCI config space access APIs
in order to read and find IOV specific PCI capabilities.
With these definitions implemented, it enables the base
driver to do SR-IOV specific initialization and HW specific
configuration required from PF-PMD driver instance.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Rasesh Mody <rmody@marvell.com>
The macro defined for milliseconds sleep was not putting the thread
to sleep and was simply calling a delay routine. This fix redefines
the macro to call the correct rte sleep API.
Fixes: ec94dbc573 ("qede: add base driver")
Cc: stable@dpdk.org
Signed-off-by: Devendra Singh Rawat <dsinghrawat@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Add support for .get_reg eth_dev ops which will be used to collect the
firmware debug data.
PMD on detecting on some HW errors will collect the FW/HW Dump to a
buffer and then it will save it to a file implemented in
qede_save_fw_dump().
Dump file location and name:
Location: <RTE_SDK> or DPDK root
Name: qede_pmd_dump_mm-dd-yy_hh-mm-ss.bin
DPDK applications can initiate a debug data collection by invoking DPDK
library’s rte_eth_dev_get_reg_info() API. This API invokes .get_reg()
interface in the PMD.
PMD implementation of .get_reg() collects the FW/HW Dump, saves it to
data field of rte_dev_reg_info and passes it to the application. It’s
the responsibility of the application to save the FW/HW Dump to a file.
We recommendation using the file name format used by qede_save_fw_dump().
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
The patch adds QEDE PMD ops and APIs to calculate the size and collect
the debug dump for various firmware components. The patch adds new files
qede_debug.[ch] that has all the firmware debug data collection
infrastructure changes.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
This patch adds base driver APIs required for debug data collection.
It adds support for dumping internal lookup tables(ilt), reading nvram
image, register definitions.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
This patch rearranges some of the base driver structures which will be
also used by debug data collection (DDC) implementation. It adds a new
file ecore_hsi_func_common.h with Physical, Virtual memory descriptors.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Remove its own bit operation APIs and use the common one,
this can reduce the code duplication largely.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Add support for get firmware version operation.
Get and dump multi boot image (MBI) version as part of get
firmware version string along with Management firmware (MFW) version.
Use qede_fw_version_get() for PMD info logs.
Signed-off-by: Yash Sharma <ysharma@marvell.com>
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
There is a common macro __rte_unused, avoiding warnings,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and
meson.build. Instead, enable ALLOW_EXPERIMENTAL_API flag across app, lib
and drivers.
This changes reduces the clutter across the project while still
maintaining the functionality of ALLOW_EXPERIMENTAL_API i.e. warning
external applications about experimental API usage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
On ungraceful termination of DPDK application, PMD VF driver
fails to re-load due to PF seeing the VF in unexpected state
during VF acquisition handshake.
This patch fixes it by allowing VF to request the PF for soft
FLR during the load in such cases so that it can get cleanly
re-loaded.
Fixes: 2ea6f76aff ("qede: add core driver")
Cc: stable@dpdk.org
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Fix the way in which the number of ports per engine of an adapter is
determined by reading port mode register. Set default value to 1.
Fixes: 3b307c55f2 ("net/qede/base: update FW to 8.40.25.0")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Replace 'typedef int bool' with 'stdbool.h' to avoid possible
multiple definitions of 'bool'.
(Not sure if the previous code is checking for true/false condition.
Recommend careful review on this patch.)
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In our testing we have identified a critical FW bug. Performance
is degraded significantly for certain packet sizes with 8.40.25.0 FW.
This patch updates the FW to version 8.40.33.0. The updated FW has a
fix to performance issue.
The patch also adds initialization for FW overlay RAM as part of
hardware initialization which is required by the new FW.
Fixes: 3b307c55f2 ("net/qede/base: update FW to 8.40.25.0")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
During LTO build compiler reports some 'false positive' warnings about
variables being possibly used uninitialized. This patch silences these
warnings.
Exemplary compiler warning to suppress (with LTO enabled):
error: ‘transceiver_type’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
switch (transceiver_type) {
Signed-off-by: Andrzej Ostruszka <aostruszka@marvell.com>
This patch updates the FW to 8.40.25.0 and corresponding base driver
changes. It also updates the PMD version to 2.11.0.1. The FW updates
consists of enhancements and fixes as described below.
- VF RX queue start ramrod can get stuck due to completion error.
Return EQ completion with error, when fail to load VF data. Use VF
FID in RX queue start ramrod
- Fix big receive buffer initialization for 100G to address failure
leading to BRB hardware assertion
- GRE tunnel traffic doesn't run when non-L2 ethernet protocol is
enabled, fix FW to not forward tunneled SYN packets to LL2.
- Fix the FW assert that is caused during vport_update when
tx-switching is enabled
- Add initial FW support for VF Representors
- Add ecore_get_hsi_def_val() API to get default HSI values
- Move following from .c to .h files:
TSTORM_QZONE_START and MSTORM_QZONE_START
enum ilt_clients
renamed struct ecore_dma_mem to phys_mem_desc and moved
- Add ecore_cxt_set_cli() and ecore_cxt_set_blk() APIs to set client
config and block details
- Use SET_FIELD() macro where appropriate
- Address spell check and code alignment issues
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Update hardware software common base driver code in preparation to
update the firmware to version 8.40.25.0.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Move DMA engine (DMAE) structures from base driver to HSI module.
Use DMAE_PARAMS_* in place of ECORE_DMAE_FLAG_*.
Enforce SET_FIELD() macro where appropriate.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Update and add runtime array offsets (rt defs), non-volatile memory
configuration options (nvm cfg) and management co-processor (mcp)
shared code in preparation to update the firmware to version 8.40.25.0.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Multiple flows can issue QM reconfiguration, hence hold the lock longer
to account for entire duration of reconfiguration flow.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
ecore_chain_set_prod/cons() sets the wrong page index in chains with
non-power of 2 page count. Fix ecore_chain_set_prod/cons() for PBL
chains with non power of 2 page count.
Calculate the right page index according to current indexes.
Fixes: ec94dbc573 ("qede: add base driver")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Add support to configure drop action in rte_flow
infrastructure and add counter for dropped
packets due to this filter action "rx_gft_filter_drop".
Also, update supported flows and actions in qede guide.
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
snprintf guarantees to always correctly place a null terminator
in the buffer string. So manually placing a null terminator
in a buffer right after a call to snprintf is redundant code.
Additionally, there is no need to use 'sizeof(buffer) - 1' in snprintf as this
means we are not using the last character in the buffer. 'sizeof(buffer)' is
enough.
Cc: stable@dpdk.org
Signed-off-by: Michael Santana <msantana@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Shifting signed 32-bit values by 31-bits has the potential for
unexpected outcomes as compiler can overwrite a bit.
Specified that values are unsigned.
Errors are observed from running cppcheck.
Bugzilla ID: 58
Fixes: 69e209be54 ("net/axgbe: add register map and related macros")
Fixes: b5bf771922 ("bnx2x: driver support routines")
Fixes: ed2ced6fe9 ("net/bnxt: check initialization before accessing stats")
Fixes: 6fda3f0ddd ("net/cxgbe: add API to program hardware MPS table")
Fixes: bdb244b969 ("e1000: whitespace changes")
Fixes: 5a32a257f9 ("e1000: more NICs in base driver")
Fixes: 2fe669f4bc ("net/nfp: support MAC address change")
Fixes: defb9a5dd1 ("nfp: introduce driver initialization")
Fixes: ec94dbc573 ("qede: add base driver")
Fixes: d2e7d931d0 ("net/qede/base: formatting changes")
Fixes: cdc07e83bb ("net/tap: add eBPF program file")
Cc: stable@dpdk.org
Signed-off-by: Andrius Sirvys <andrius.sirvys@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
During initialization of leading PF, we need to initialize HW for LLH
filters. Set HW init parameter to set the engine affinity for
multiple engine adapters.
Fixes: 3eed444a96 ("net/qede/base: changes for 100G")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Some global variables are defined with generic names, add component name
as prefix to variables to prevent collusion with application variables.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Some global variables can indeed be static, add static keyword to them.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This functionality was missed while adding new drivers to
the meson build.
Fixes: bfabd06000 ("net/avf: support meson build")
Fixes: 30d3d01683 ("net/qede: add in meson build")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add APIs for dscp priority map configuration. APIs added are
ecore_dcbx_get_dscp_priority(), ecore_dcbx_set_dscp_priority().
These base driver APIs can be used for dscp-map query/config.
Configure the doorbell queue (DORQ) to use vlan-id/priority.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add 'rl_bc_stage_th','rl_timer_stage_th' and 'dcqcn_reset_alpha_on_idle'
to RL update param as well as logs.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Change details:
- Get engine affinity from the management FW and configure accordingly
- Add an LLH filter with the primary MAC address in QPAR/NPAR
- Move some of the LLH APIs around
- Add PPFID APIs
- Update all allocated ppfids with the same value for the
following PORT_PF registers:
NIG_REG_DSCP_TO_TC_MAP_ENABLE
- Add port_id, src_pfid and dst_pfid to DMA engine params
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Request management FW for OEM values, which are negotiated prior to
the driver load by sending the GET_OEM_UPDATES command after both
engines are initialized.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add a pretend function for port/PF, pretend to another port and another
function when accessing the ptt window
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
