Currently, there is a potential problem that calling the API function
rte_eth_dev_set_vlan_offload to start VLAN hardware offloads which the
driver does not support. If the PMD driver does not support certain VLAN
hardware offloads and does not check for it, the hardware setting will
not change, but the VLAN offloads in dev->data->dev_conf.rxmode.offloads
will be turned on.
It is supposed to check the hardware capabilities to decide whether the
relative callback needs to be called just like the behavior in the API
function named rte_eth_dev_configure. And it is also needed to cleanup
duplicated checks which are done in some PMDs. Also, note that it is
behaviour change for some PMDs which simply ignore (with error/warning
log message) unsupported VLAN offloads, but now it will fail.
Fixes: a4996bd89c ("ethdev: new Rx/Tx offloads API")
Fixes: 0ebce6129b ("net/dpaa2: support new ethdev offload APIs")
Fixes: f9416bbafd ("net/enic: remove VLAN filter handler")
Fixes: 4f7d9e383e ("fm10k: update vlan offload features")
Fixes: fdba3bf15c ("net/hinic: add VLAN filter and offload")
Fixes: b96fb2f0d2 ("net/i40e: handle QinQ strip")
Fixes: d4a27a3b09 ("nfp: add basic features")
Fixes: 56139e85ab ("net/octeontx: support VLAN filter offload")
Fixes: ba1b3b081e ("net/octeontx2: support VLAN offloads")
Fixes: d87246a437 ("net/qede: enable and disable VLAN filtering")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Adding support for rx checksum offload. In case of wrong
checksum received (inner/outer l3/l4) it reports the
corresponding layer which has bad checksum. It also adds
rx burst function pointer hook for rx checksum offload to
event PMD.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adding macro based framework to hook dequeue/enqueue function
pointers to the appropriate function based on rx/tx offloads.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When octeontx_create() is cleaning up, it does not correctly set
the mac_addrs variable to NULL, which will lead to a double free.
Fixes: 9e399b88ce ("net/octeontx: fix memory leak of MAC address table")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
This patch implements rx/tx checksum offload. In case of
wrong checksum received (inner/outer l3/l4) it reports the
corresponding layer which has bad checksum and also corrects
it if hw checksum is enabled on tx side.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Adding support for setting link up/down eth operation.
It is used to enable disable lmac. Also implemented a
poll function for getting the link status at regular
intervals.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Patch adds support for vlan filter offload support.
MBOX messages for vlan filter on/off and vlan filter
entry add/rm are added to configure PCAM entries to
filter out the vlan traffic on a given port.
Patch also defines rx_offload_flag for vlan filtering.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
Adding macro based framework to hook rx/tx burst function
pointers to the appropriate function based on rx/tx offloads.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Adding multi segment support to the octeontx PMD. Also
adding the logic to share rx/tx ofloads with the eventdev
code.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Add a condition to check if octeontx drivers are disabled.
octeontx drivers are built only if dependent drivers i.e.
ethdev, mempool and common/octeontx are enabled.
Bugzilla ID: 387
Fixes: 7f615033d6 ("drivers/net: build Cavium NIC PMDs with meson")
Cc: stable@dpdk.org
Signed-off-by: Amit Gupta <agupta3@marvell.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and
meson.build. Instead, enable ALLOW_EXPERIMENTAL_API flag across app, lib
and drivers.
This changes reduces the clutter across the project while still
maintaining the functionality of ALLOW_EXPERIMENTAL_API i.e. warning
external applications about experimental API usage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Earlier after a successful mac_addr_add operation, index was returned
by underlying layer which was unused but same as provided by DPDK API.
So API is enhanced to use application provided index location to add
MAC address entry.
Fixes: e4373bf1b3 ("net/octeontx: add unicast MAC filter")
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
MAC address table is allocated during octeontx device create and
same is used to maintain list of MAC address associated to port.
This table is not getting freed niether in case of error nor during
graceful shutdown of port.
Patch fixes memory required memory for both the cases as mentioned.
Fixes: f18b146c49 ("net/octeontx: create ethdev ports")
Cc: stable@dpdk.org
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
At BGX, DMAC filter table can be enabled to allow defined hosts.
Patch implements 'mac_addr_add' and 'mac_addr_remove' ops to
add/remove MAC filters which uses BGX DMAC filter table.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
Sync mail box data structures to version 1.1.3.
Add mail box version verification and defer initializing octeontx
devices if mail box version mismatches.
Update OCTEON TX limitaion with max mempool size used.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Merge all versions in linker version script files to DPDK_20.0.
This commit was generated by running the following command:
:~/DPDK$ buildtools/update-abi.sh 20.0
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since the library versioning for both stable and experimental ABI's is
now managed globally, the LIBABIVER and version variables no longer
serve any useful purpose, and can be removed.
The replacement in Makefiles was done using the following regex:
^(#.*\n)?LIBABIVER\s*:=\s*\d+\n(\s*\n)?
(LIBABIVER := numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
The replacement for meson files was done using the following regex:
^(#.*\n)?version\s*=\s*\d+\n(\s*\n)?
(version = numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
[David]: those variables are manually removed for the files:
- drivers/common/qat/Makefile
- lib/librte_eal/meson.build
[David]: the LIBABIVER is restored for the external ethtool example
library.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Change return value of the callbacks from void to int. Make
implementations across all drivers return negative errno
values in case of error conditions.
Both callbacks are updated together because a large number of
drivers assign the same function to both callbacks.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enabling/disabling of promiscuous mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change eth_dev_infos_get_t return value from void to int.
Make eth_dev_infos_get_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
All log messages should use driver logtype. RTE_LOGTYPE_PMD is
planned to be deprecated in the future.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The octeontx driver is creating vdev with name "OCTEONTX_PMD"
which is an artifact from how RTE_PMD_REGISTER_VDEV arguments
work.
Change to use the same convention as all the other network
drivers ie "net_octeontx").
Fixes: f7be70e513 ("net/octeontx: add net device probe and remove")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When eth_octeontx is initialized before event_octeontx, eth_octeontx
would initiate setting up of the event device with the max ports and
queues available. If number of ports is more than the number of queues,
some ports would be left unused when the ports and queues are mapped
1:1. But even in that case the ports need to be setup, or otherwise it
would lead to a segmentation fault when event device is started.
Fixes: f7be70e513 ("net/octeontx: add net device probe and remove")
Cc: stable@dpdk.org
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
When the priv_size of the mbuf is > 128 bytes, the mbuf would not be
properly constructed. This would lead to a corrupt mbuf.
This patch fixes the issue by accounting for
rte_pktmbuf_priv_size(pool) and RTE_PKTMBUF_HEADROOM
while configuring first skip register calculation.
Fixes: 197438ee9f ("net/octeontx: add Rx queue setup and release ops")
Cc: stable@dpdk.org
Suggested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Signed-off-by: Nitin Saxena <nitin.saxena@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
After previous changes, the function rte_eth_dev_release_port()
can be used for primary or secondary process as well.
The only difference with rte_eth_dev_release_port_secondary()
is the shared lock used in rte_eth_dev_release_port().
The function rte_eth_dev_release_port_secondary() was recently
added in 18.11 cycle.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
This is a clean-up of common ethdev data freeing.
All data freeing are moved to rte_eth_dev_release_port()
and done only in case of primary process.
It is probably fixing some memory leaks for PMDs which were
not freeing all data.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
'OCTEON TX' is the registered name. All other usages need to be fixed.
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Attach port from secondary should ignore devargs since the private
device is not necessary to support. Also previously, detach port on
a secondary process will mess primary process and cause the same
device can't be attached back again. A secondary process should use
rte_eth_dev_release_port_secondary to release a port.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Add Tx adapter support and move few routines around to avoid code
duplication.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The driver setting of "allow_experimental_apis" was not being used when
building the base code. To allow this we can manually put in a check
in the base code files for the setting and set the appropriate cflag
if it's needed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tested-by: Ilya Maximets <i.maximets@samsung.com>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
LMTST does not guarantee packet content get synced with L2C when
HW access the packet for transmitting.
Adding coherent IO write barrier will make sure HW sees the correct
packet if its modified.
Fixes: 9e747589bd ("net/octeontx: add packet transmit burst function")
Cc: stable@dpdk.org
Reported-by: Vikas Aggarwal <vikas.aggarwal@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
On dev_stop the Rx/Tx_burst functions are being set to NULL, this causes
a SEGFAULT in cases where control path calls stop and a paket is still
being processed by a worker.
Instead clear the fastpath functions in dev_close.
Fixes: da6c687471 ("net/octeontx: add start and stop support")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Calling rte_eth_dev_info_get() on secondary process cause a crash
because eth_dev->device is not set properly.
Fixes: ee27edbe0c ("drivers/net: share vdev data to secondary process")
Cc: stable@dpdk.org
Reported-by: Vipin Varghese <vipin.varghese@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
HW needs each pool to be mapped to an aura set of 16 auras.
Previously, pool to aura mapping was considered to be 1:1.
Fixes: 02fd6c7443 ("mempool/octeontx: support allocation")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the function definition.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
DEV_RX_OFFLOAD_KEEP_CRC offload flag is added. PMDs that support
keeping CRC should advertise this offload capability.
DEV_RX_OFFLOAD_CRC_STRIP flag will remain one more release
default behavior in PMDs are to keep the CRC until this flag removed
Until DEV_RX_OFFLOAD_CRC_STRIP flag is removed:
- Setting both KEEP_CRC & CRC_STRIP is INVALID
- Setting only CRC_STRIP PMD should strip the CRC
- Setting only KEEP_CRC PMD should keep the CRC
- Not setting both PMD should keep the CRC
A helper function rte_eth_dev_is_keep_crc() has been added to be able to
change the no flag behavior with minimal changes in PMDs.
The PMDs that doesn't report the DEV_RX_OFFLOAD_KEEP_CRC offload can
remove rte_eth_dev_is_keep_crc() checks next release, related code
commented to help the maintenance task.
And DEV_RX_OFFLOAD_CRC_STRIP has been added to virtual drivers since
they don't use CRC at all, when an application requires this offload
virtual PMDs should not return error.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
A new hook function is added and called inside the PMDs at the end
of the device probing:
- in primary process, after allocating, init and config
- in secondary process, after attaching and local init
This new function is almost empty for now.
It will be used later to add some post-initialization processing.
For the PMDs calling the helpers rte_eth_dev_create() or
rte_eth_dev_pci_generic_probe(), the hook rte_eth_dev_probing_finish()
is called from here, and not in the PMD itself.
Note that the helper rte_eth_dev_create() could be used more,
especially for vdevs, avoiding some code duplication in PMDs.
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
This patch check if a input requested offloading is valid or not.
Any reuqested offloading must be supported in the device capabilities.
Any offloading is disabled by default if it is not set in the parameter
dev_conf->[rt]xmode.offloads to rte_eth_dev_configure() and
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
If any offloading is enabled in rte_eth_dev_configure() by application,
it is enabled on all queues no matter whether it is per-queue or
per-port type and no matter whether it is set or cleared in
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
If a per-queue offloading hasn't be enabled in rte_eth_dev_configure(),
it can be enabled or disabled for individual queue in
ret_eth_[rt]x_queue_setup().
A new added offloading is the one which hasn't been enabled in
rte_eth_dev_configure() and is reuqested to be enabled in
rte_eth_[rt]x_queue_setup(), it must be per-queue type,
otherwise trigger an error log.
The underlying PMD must be aware that the requested offloadings
to PMD specific queue_setup() function only carries those
new added offloadings of per-queue type.
This patch can make above such checking in a common way in rte_ethdev
layer to avoid same checking in underlying PMD.
This patch assumes that all PMDs in 18.05-rc2 have already
converted to offload API defined in 17.11 . It also assumes
that all PMDs can return correct offloading capabilities
in rte_eth_dev_infos_get().
In the beginning of [rt]x_queue_setup() of underlying PMD,
add offloads = [rt]xconf->offloads |
dev->data->dev_conf.[rt]xmode.offloads; to keep same as offload API
defined in 17.11 to avoid upper application broken due to offload
API change.
PMD can use the info that input [rt]xconf->offloads only carry
the new added per-queue offloads to do some optimization or some
code change on base of this patch.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
