During initialization of leading PF, we need to initialize HW for LLH
filters. Set HW init parameter to set the engine affinity for
multiple engine adapters.
Fixes: 3eed444a96 ("net/qede/base: changes for 100G")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Some global variables are defined with generic names, add component name
as prefix to variables to prevent collusion with application variables.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Some global variables can indeed be static, add static keyword to them.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This functionality was missed while adding new drivers to
the meson build.
Fixes: bfabd06000 ("net/avf: support meson build")
Fixes: 30d3d01683 ("net/qede: add in meson build")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add APIs for dscp priority map configuration. APIs added are
ecore_dcbx_get_dscp_priority(), ecore_dcbx_set_dscp_priority().
These base driver APIs can be used for dscp-map query/config.
Configure the doorbell queue (DORQ) to use vlan-id/priority.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add 'rl_bc_stage_th','rl_timer_stage_th' and 'dcqcn_reset_alpha_on_idle'
to RL update param as well as logs.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Change details:
- Get engine affinity from the management FW and configure accordingly
- Add an LLH filter with the primary MAC address in QPAR/NPAR
- Move some of the LLH APIs around
- Add PPFID APIs
- Update all allocated ppfids with the same value for the
following PORT_PF registers:
NIG_REG_DSCP_TO_TC_MAP_ENABLE
- Add port_id, src_pfid and dst_pfid to DMA engine params
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Request management FW for OEM values, which are negotiated prior to
the driver load by sending the GET_OEM_UPDATES command after both
engines are initialized.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add a pretend function for port/PF, pretend to another port and another
function when accessing the ptt window
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Modified queue manager getter APIs to cycle through their range if
index is higher than max. This prevents accessing index out of bounds.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Added ecore_update_eth_rss_ind_table_entry() api to update FW RSS
indirection table entry according to new interface of FW 8.37.x.x.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
The driver can notify that there was an MCP reset and read the SHMEM
values before the management FW has completed initializing them.
As a temporary solution, the "sup_msgs" field is used as a SHMEM data
ready indication. This should be replaced with an actual indication
when it is provided by the management FW.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add DPC sync after stopping the physical funciton to allow clean up of
asyncronous events. Post this the driver don't expect the FW to send
async events.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Management firmware does not properly clean IGU block in PF FLR flow
which may result in undelivered attentions for link events from
default status block.
Add a workaround in PMD to execute extra IGU cleanup right after PF FLR
is done.
Fixes: 9e2f08a4ad ("net/qede/base: add request for PF FLR before load request")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
- In order to prepare the base for RTE FLOW support,
convert common code used for flow director support
into common aRFS code.
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
When trust mode is set to ON, VF can change it's MAC address
inspite PF has set a forced MAC for that VF from HV.
Earlier similar functionality is provided by module parameter
"allow_vf_mac_change_mode" of qed.
This change makes few changes in behavior of VF shadow config -
- Let driver track the VF mac in shadow config as long as trust
mode is OFF.
- Once trust mode is ON, we should not care about MACs in shadow
config (because we never intend to fall back because of lack of restore
implementation).
- Delete existing shadow MAC (this helps when trust mode is turned OFF,
and VF tries to add new MAC – it won’t fail that time since we have
a clean slate).
- Skip addition and deletion of MACs in shadow configs.
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Fix logic for sfp get rx_los, tx_fault, tx_disable, and sfp set tx_disable.
Fixes: bdc40630a8 ("net/qede/base: add APIs for xcvr")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Limit the number of non ethernet queues to 64, allowing a max queues to
status block ratio of 2:1 in case of storage target. Theoretically a
non-target storage PF can have 128 queues and SBs.
This change is to support 64 entries for a target iSCSI/FCoE PF and 128
for a non-target.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Fix to program the HW registers with proper ether type.
Fixes: 36f45bce25 ("net/qede/base: fix to support OVLAN mode")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add support for the following OneView APIs:
- ecore_mcp_ov_update_mtu() - Send MTU value to the management FW.
- ecore_mcp_ov_update_mac() - Send MAC address to the management FW.
- ecore_mcp_ov_update_eswitch() - Send eswitch_mode to management FW
after the firmware load.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
This fix adds a ecore_mcp_update_stag() handler to handle the STAG update
events from management FW and program the STAG value.
It also clears the stag config on PF, when management FW invalidates
the stag value.
Fixes: ec94dbc573 ("qede: add base driver")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Treat any attention which is not for timeout event as invalid
and return status accordingly. The HW error handler logs and clears
the HW attention. Without this fix we can see flood of GRC attentions.
Fixes: e6051bd6b0 ("qede: add interrupt handling support")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
VDMs may cause the was_error indication to be set after the driver
clears it. Clear the indication after the internal FID_enable for
the PF is set.
Fixes: 60c78a5e25 ("net/qede/base: fix recovery from previous ungraceful exit")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
We were using LICENSE.qede_pmd to reference inclusion of SPDX licensing
tag from all the source file. Remove the LICENSE.qede_pmd file and
directly include SPDX tags in source files.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Multiple port reconfigurations can lead to memory allocation failures
due to hitting RTE memzone limit or no more room in config while
reserving memzone.
When freeing memzones, update the memzone mapping and the memzone count.
Release Rx and Tx queue rings allocated during queue setup.
Fixes: a39001d90d ("net/qede: fix DMA memory leak")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Reviewed-by: Kevin Traynor <ktraynor@redhat.com>
This patch fixes VF MTU update to work without having to restart the
vport and there by not requiring port re-configuration. It adds a
VF MTU Update TLV to achieve the same. Firmware can handle VF MTU update
by just pausing the vport.
Fixes: dd28bc8c6e ("net/qede: fix VF port creation sequence")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Reduce the verbosity in ecore_pglueb_rbc_attn_handler() while logging
errmsg during HW init. This could happen due to ungraceful exit of
previous driver instance.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add packet pacing support for PFs.
ecore client can request for enabling packet pacing at init time,
if requested then ecore is going to skip MCoS and SRIOV configurations.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
This fix allows driver to program NIC configuration to support OVLAN
mode in multi-function scenario
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add SPQ timeout base driver parameter support management FW timeout values
other than default and none. Have fallback mechanism for old MFWs.
Reduce the default timeout to 1 sec.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>