The EAL and compat libraries were special-cases in the library build
process, the former because of it's complexity, and the latter because
it only consists of a single header file.
By reworking the EAL meson.build files, we can eliminate the need for it to
be a special case, by having it build up and return the list of sources,
headers, and objects and return those to the higher level build file. This
should also simplify the building of EAL, as we can eliminate a number of
meson.build files that would no longer be needed, and have fewer, but
larger meson.build files (9 now vs 14 previous) - thereby making the logic
easier to follow and items easier to find.
Once done, we can pull eal into the main library loop, with some
modifications to support it. Compat can also be pulled it once we add in a
check to handle the case of an empty sources list.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Add to the contributors guide details on how to add libraries and drivers
and integrate them with the DPDK build system(s).
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
We need the synchronous way for multi-process communication,
i.e., blockingly waiting for reply message when we send a request
to the peer process.
We add two APIs rte_eal_mp_request() and rte_eal_mp_reply() for
such use case. By invoking rte_eal_mp_request(), a request message
is sent out, and then it waits there for a reply message. The caller
can specify the timeout. And the response messages will be collected
and returned so that the caller can decide how to translate them.
The API rte_eal_mp_reply() is always called by an mp action handler.
Here we add another parameter for rte_eal_mp_t so that the action
handler knows which peer address to reply.
sender-process receiver-process
---------------------- ----------------
thread-n
|_rte_eal_mp_request() ----------> mp-thread
|_timedwait() |_process_msg()
|_action()
|_rte_eal_mp_reply()
mp_thread <---------------------|
|_process_msg()
|_signal(send_thread)
thread-m <----------|
|_collect-reply
* A secondary process is only allowed to talk to the primary process.
* If there are multiple secondary processes for the primary process,
it will send request to peer1, collect response from peer1; then
send request to peer2, collect response from peer2, and so on.
* When thread-n is sending request, thread-m of that process can send
request at the same time.
* For pair <action_name, peer>, we guarantee that only one such request
is on the fly.
Suggested-by: Anatoly Burakov <anatoly.burakov@intel.com>
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Previouly, there are three channels for multi-process
(i.e., primary/secondary) communication.
1. Config-file based channel, in which, the primary process writes
info into a pre-defined config file, and the secondary process
reads the info out.
2. vfio submodule has its own channel based on unix socket for the
secondary process to get container fd and group fd from the
primary process.
3. pdump submodule also has its own channel based on unix socket for
packet dump.
It'd be good to have a generic communication channel for multi-process
communication to accommodate the requirements including:
a. Secondary wants to send info to primary, for example, secondary
would like to send request (about some specific vdev to primary).
b. Sending info at any time, instead of just initialization time.
c. Share FDs with the other side, for vdev like vhost, related FDs
(memory region, kick) should be shared.
d. A send message request needs the other side to response immediately.
This patch proposes to create a communication channel, based on datagram
unix socket, for above requirements. Each process will block on a unix
socket waiting for messages from the peers.
Three new APIs are added:
1. rte_eal_mp_action_register() is used to register an action,
indexed by a string, when a component at receiver side would like
to response the messages from the peer processe.
2. rte_eal_mp_action_unregister() is used to unregister the action
if the calling component does not want to response the messages.
3. rte_eal_mp_sendmsg() is used to send a message, and returns
immediately. If there are n secondary processes, the primary
process will send n messages.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds support for registering and waiting for Rx interrupts.
This allows applications to wait for Rx events from the PMD using the
DPDK rte_epoll subsystem.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
This patch is the last patch in the series of patches aimed
to add support for registering and waiting for Rx interrupts
in failsafe PMD. This allows applications to wait for Rx events
from the PMD using the DPDK rte_epoll subsystem.
The failsafe PMD presents to the application a facade of a single
device to be handled by the application while internally it manages
several devices on behalf of the application including packets
transmission and reception.
The Proposed failsafe Rx interrupt scheme follows this approach.
The failsafe PMD will present the application with a single set of
Rx interrupt vectors representing the failsafe Rx queues, while
internally it will serve as an interrupt proxy for its subdevices.
will allow applications to wait for Rx traffic from the failsafe
PMD by registering and waiting for Rx events from its Rx queues.
In order to support this the following is suggested:
* Every Rx queue in the failsafe (virtual) device will be assigned
* a Linux event file descriptor (efd) and an enable_interrupts flag.
* The failsafe PMD will fill in its rte_intr_handle structure with
the Rx efds assigned previously and register them with the EAL.
* The failsafe driver will create a private epoll fd (epfd) and
* will allocate enough space to handle all the Rx events from all its
subdevices.
* Acting as an application,
for each Rx queue in each active subdevice the failsafe will:
o Register the Rx queue with the EAL.
o Pass the EAL the failsafe private epoll fd as the epfd to
register the Rx queue event on.
o Pass the EAL, as a parameter, the pointer to the failsafe Rx
queue that handles this Rx queue.
o Using the DPDK service callbacks, the failsafe PMD will launch
an Rx proxy service that will Wait on the epoll fd for Rx
events from the sub-devices.
o For each Rx event received the proxy service will
- Retrieve the pointer to failsafe Rx queue that handles
this subdevice Rx queue from the user info returned by the
EAL.
- Trigger a failsafe Rx event on that queue by writing to
the event fd unless interrupts are disabled for that queue.
* The failsafe pmd will also implement the rx_queue_intr_enable
* and rx_queue_intr_disable routines that will enable and disable Rx
interrupts respectively on both on the failsafe and its subdevices.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
By default both static and shared libraries should be created while
building MUSDK library. It turns out that this will not happen if
host parameter is not explicitly passed to the configure script.
Specifying host makes sure configure will detect support for shared
libraries.
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Secondary process is not allowed to register mempools on the flight.
The code will return invalid memory key for such case.
Fixes: 87ec44ce16 ("net/mlx5: add operations for secondary process")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This patch adds information about i40e queue region related to
the release notes.
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Document the need to add the __experimental tag to appropriate functions
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This commit adds a new function rte_eal_cleanup().
The function serves as a hook to allow DPDK to release
internal resources (e.g.: hugepage allocations).
This function allows DPDK to become more like an ordinary
library, where the library context itself can be initialized
and cleaned up by the application.
The rte_exit() and rte_panic() functions must be considered,
particularly if they should call rte_eal_cleanup() to release any
resources or not. This patch adds the cleanup to rte_exit(),
but does not clean up on rte_panic(). The reason to not clean
up on panicing is that the developer may wish to inspect the
exact internal state of EAL and hugepages.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Vipin Varghese <vipin.varghese@intel.com>
This patch add support for various mempool ops config helper APIs.
1.User defined mempool ops
2.Platform detected HW mempool ops (active).
3.Best selection of mempool ops by looking into user defined,
platform registered and compile time configured.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The __rte_cache_aligned was applied to the whole array,
not the array elements. This leads to a false sharing between
the monitored cores.
Fixes: e70a61ad50 ("keepalive: export states")
Cc: stable@dpdk.org
Signed-off-by: Andriy Berestovskyy <aber@semihalf.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Fix build issue with pdf guides. Some indentations in the bbdev test
application doc were causing build failures. Latex Log message:
doc.log:! LaTeX Error: Too deeply nested.
Fixes: f714a18885 ("app/testbbdev: add test application for bbdev")
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Using DPDK in Hyper-V VM systems requires vdev_netvsc driver to pair
the NetVSC netdev device with the same MAC address PCI device by
fail-safe PMD.
Add vdev_netvsc custom scan in vdev bus to allow automatic probing in
Hyper-V VM systems unless it was already specified by command line.
Add "ignore" parameter to disable this auto-detection.
Signed-off-by: Matan Azrad <matan@mellanox.com>
This parameter allows specifying any non-NetVSC interface or routed
NetVSC interfaces to use with tap sub-devices for development purposes.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Matan Azrad <matan@mellanox.com>
NetVSC netdevices which are already routed should not be probed because
they are used for management purposes by the HyperV.
prevent routed netvsc devices probing.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Matan Azrad <matan@mellanox.com>
As described in more details in the attached documentation (see patch
contents), this virtual device driver manages NetVSC interfaces in virtual
machines hosted by Hyper-V/Azure platforms.
This driver does not manage traffic nor Ethernet devices directly; it acts
as a thin configuration layer that automatically instantiates and controls
fail-safe PMD instances combining tap and PCI sub-devices, so that each
NetVSC interface is exposed as a single consolidated port to DPDK
applications.
PCI sub-devices being hot-pluggable (e.g. during VM migration),
applications automatically benefit from increased throughput when present
and automatic fallback on NetVSC otherwise without interruption thanks to
fail-safe's hot-plug handling.
Once initialized, the sole job of the vdev_netvsc driver is to regularly
scan for PCI devices to associate with NetVSC interfaces and feed their
addresses to corresponding fail-safe instances.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Matan Azrad <matan@mellanox.com>
This patch lays the groundwork for this driver (draft documentation,
copyright notices, code base skeleton and build system hooks). While it can
be successfully compiled and invoked, it's an empty shell at this stage.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Matan Azrad <matan@mellanox.com>
Previous fail-safe code didn't support probed sub-devices capture and
failed when it tried to probe them.
Skip fail-safe sub-device probing when it already was probed.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
fix one typo and a grammatical mistake.
Fixes: b0152b1b40 ("doc: update bonding")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Ethdev Tx offloads API has changed since:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
This commit support the new Tx offloads API.
The code which fills in txq_flags in default_txconf is preserved
because rte_eth_dev_info_get() lacks conversion between offloads
and txq_flags fields which means that a legacy application which
relies on default_txconf will fail to configure Tx queues in the
case when some bits in txq_flags are mandatory.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add note about PMD expects the network interfaces provided to be up,
documented behavior to set expectations right.
Also added minor fix.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
In case of inline protocol processed ingress traffic, the packet may not
have enough information to determine the security parameters with which
the packet was processed. In such cases, application could get metadata
from the packet which could be used to identify the security parameters
with which the packet was processed.
Application could register "userdata" with the security session, and
this could be retrieved from the metadata of inline processed packets.
The metadata returned by "rte_security_get_pkt_metadata()" will be
device specific. Also the driver is expected to return the application
registered "userdata" as is, without any modifications.
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add support for IMIX performance tests, where a distribution
of various packet sizes can be submitted to a crypto
device, testing a closer to a real world scenario.
A sequence of packet sizes, selected randomly from a list of packet
sizes (with "buffer-sz" parameter) with a list of the weights
per packet size (using "imix" parameter), is generated
(the length of this sequence is the same length as the pool,
set with "pool-sz" parameter).
This sequence is used repeteadly for all the crypto
operations submitted to the crypto device (with "--total-ops" parameter).
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
IPSec Multi-buffer library v0.48 has been released,
which includes, among other features, support for AES-CCM.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
When security offload is enabled, the packet should be forwarded on the
port configured in the SA. Security session will be configured on that
port only, and sending the packet on other ports could result in
unencrypted packets being sent out.
This would have performance improvements too, as the per packet LPM
lookup would be avoided for IPsec packets, in inline mode.
Fixes: ec17993a14 ("examples/ipsec-secgw: support security offload")
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
List of supported OpenSSL versions and code block with dependencies were
not properly formatted.
Fixes: d61f70b4c9 ("crypto/libcrypto: add driver for OpenSSL library")
Cc: stable@dpdk.org
Signed-off-by: Andrea Grandi <andrea.grandi@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add a missing space must before the first item of the list to display it
correctly in the User Guide.
Fixes: d61f70b4c9 ("crypto/libcrypto: add driver for OpenSSL library")
Fixes: b79e4c00af ("cryptodev: use AES-GCM/CCM as AEAD algorithms")
Cc: stable@dpdk.org
Signed-off-by: Andrea Grandi <andrea.grandi@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Rename eventdev_pipeline_sw_pmd to eventdev_pipeline as it is no longer
specific underlying event device.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add selftest as a device argument that can be enabled by suppling
'self_test=1' as a vdev parameter
--vdev="event_octeontx,self_test=1"
The selftest is run after vdev creation is successfully
complete.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add the description about opdl pmd
Signed-off-by: Liang Ma <liang.j.ma@intel.com>
Signed-off-by: Peter Mccarthy <peter.mccarthy@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
This commit adds a OPDL implementation of the eventdev API. The
implementation here is intended to enable the community to use
the OPDL infrastructure under eventdev API.
The main components of the implementation is three files:
- opdl_evdev.c Creation, configuration, etc
- opdl_evdev_xstats.c helper function to support stats collection
- opdl_evdev.h include the main data structure of opdl
device and all the function prototype
need to be exposed to support eventdev API.
- opdl_evdev_init.c implement all initailization helper function
This commit only adds the implementation, no existing DPDK files
are modified.
Signed-off-by: Liang Ma <liang.j.ma@intel.com>
Signed-off-by: Peter Mccarthy <peter.mccarthy@intel.com>
Add command line option --prod_type_ethdev to specify that the events
are generated by ethernet device.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
- sample application performing a loop-back over ethernet using
a bbbdev device
- 'turbo_sw' PMD must be enabled for the app to be functional
- a packet is received on an ethdev port -> enqueued for baseband
encode operation -> dequeued -> enqueued for baseband decode
operation-> dequeued -> compared with original signal -> looped-back
to the ethdev port
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
- full test suite for bbdev
- test App works seamlessly on all PMDs registered with bbdev
framework
- a python script is provided to make our life easier
- supports execution of tests by parsing Test Vector files
- test Vectors can be added/deleted/modified with no need for
re-compilation
- various tests can be executed:
(a) Throughput test
(b) Offload latency test
(c) Operation latency test
(d) Validation test
(c) Sanity checks
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
- bbdev 'turbo_sw' is the software accelerated version of 3GPP L1
Turbo coding operation using the optimized Intel FlexRAN SDK libraries.
- 'turbo_sw' pmd is disabled by default
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
- 'bbdev_null' is a basic pmd that performs a minimalistic
bbdev operation
- useful for bbdev smoke testing and in measuring the overhead
introduced by the bbdev library
- 'bbdev_null' pmd is enabled by default
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
- wireless baseband device (bbdev) library files
- bbdev is tagged as EXPERIMENTAL
- Makefiles and configuration macros definition
- bbdev library is enabled by default
- release notes of the initial version
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
As discussed on the mailing list, the alignment constraint of
the ring structure can be relaxed.
Link: http://dpdk.org/dev/patchwork/patch/25039
Link: http://dpdk.org/dev/patchwork/patch/26103
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Remove RTE_LOG_LEVEL config option, use existing RTE_LOG_DP_LEVEL config
option for controlling datapath log level.
RTE_LOG_LEVEL is no longer needed as dynamic logging can be used to
control global and module specific log levels.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Rte_flow was defined to include RSS, this patch moves i40e
existing RSS to rte_flow. The old RSS configuration is kept
as it was, and can be deprecated in the future.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds command to configure input set for RSS,
FDIR, and FDIR flexible payload.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
There are new Ethernet device events - NEW and DESTROY, and new option
to register all ports by one call.
Adjust application to aforementioned changes.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The pointer to the user parameter of the callback registration is
automatically pass to the callback function.
There is no point to allow changing this user parameter by a caller.
That's why this parameter is always set to NULL by PMDs and set only
in ethdev layer before calling the callback function.
The history is that the user parameter was initially used
by the callback implementation to pass some information
between the application and the driver:
c1ceaf3ad0 ("ethdev: add an argument to internal callback function")
Then a new parameter has been added to leave the user parameter
to its standard usage of context given at registration:
d6af1a13d7 ("ethdev: add return values to callback process API")
The NULL parameter in the internal callback processing function
is now removed. It makes clear that the callback parameter is user
managed and opaque from a DPDK point of view.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add description of raw flow type mode for flow_director_filter
command in testpmd. Modify description of flow type parameter
for functions set_hash_global_config, set_hash_input_set and
set_fdir_input_set.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Update i40e.rst to declare DDP support and input set configuration,
as implemented in DPDK 17.11.
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Without this patch, the number of queues per i40e VF is set to 4
by CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4 in config/common_base.
It is a fixed value determined at compile time and can't be changed
at run time.
With this patch, the number of queues per i40e VF can be determined
at run time. For example, if the PCI address of an i40e PF is
aaaa:bb.cc, with the EAL parameter -w aaaa:bb.cc,queue-num-per-vf=8,
the number of queues per VF created from this PF is set to 8.
If there is no "queue-num-per-vf" setting in EAL parameters, it uses
the default value of 4. And if the value after the "queue-num-per-vf"
is invalid, it will also use the default value. The valid values can
be 1, 2, 4, 8, or 16.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Rte_flow was defined to include RSS, this patch moves ixgbe
existing RSS to rte_flow. The old RSS configuration is kept
as it was, and can be deprecated in the future.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Rte_flow was defined to include RSS, this patch moves igb
existing RSS functionalities into rte_flow. The old RSS
configuration method is kept as it was, and can be deprecated in
the future.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
There is no dedicated controls for inner checksum offload on
device/queue level. So, enable together with outer offloads.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
In the case of tunnel packet, PKT_RX_{IP,L4}_CSUM_* flags correspond
to inner packet checksums. There is only one flag to indicate bad
external IPv4 header checksum.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Remove unused debug config options for thunder nicvf and octeontx as they
are now controlled by dynamic logging.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
According to loopback mode, setup loopback link or not.
If loopback link is set, packets transmitted will be
looped back to received side directly.
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This workaround was needed to properly handle device removal with old
Mellanox OFED releases that are not supported by this PMD anymore.
Starting from rdma-core v16 this removal issue shouldn't happen when
setting MLX4_DEVICE_FATAL_CLEANUP environment variable to 1.
Set the aforementioned variable to 1.
Reverts: 5f4677c6ad ("net/mlx4: workaround verbs error after plug-out")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add the ability to match VNI and protocol fields of GENEVE protocol
header.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add new pattern item RTE_FLOW_ITEM_TYPE_GENEVE in flow API.
Add default mask for the item.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Implemented the 'time_sync' related APIs for supporting the PTP
protocol.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Update the guide with more details on the different statistics query
possible with MLX5 PMD.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This command will simulate the process of setting the
eth-peer from command line.
It will be useful to perform extra testing.
usage:
testpmd> set eth-peer <port_id> <peer_addr>.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Since testpmd is now using the new Ethdev offloads API and there is
a way configure each of the tx offloads from CLI or command line,
there is no need for the txqflags configuration anymore.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds command line option to set hex value for the ports Tx
offloads flags.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds a framework that allows GRO on tunneled packets.
Furthermore, it leverages that framework to provide GRO support for
VxLAN-encapsulated packets. Supported VxLAN packets must have an outer
IPv4 header, and contain an inner TCP/IPv4 packet.
VxLAN GRO doesn't check if input packets have correct checksums and
doesn't update checksums for output packets. Additionally, it assumes
the packets are complete (i.e., MF==0 && frag_off==0), when IP
fragmentation is possible (i.e., DF==0).
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Junjie Chen <junjie.j.chen@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
This patch complies RFC 6864 to process IPv4 ID fields. Specifically, GRO
ingores IPv4 ID fields for the packets whose DF bit is 1, and checks IPv4
ID fields for the packets whose DF bit is 0.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Junjie Chen <junjie.j.chen@intel.com>
This patch updates codes as follows:
- change appropriate names for internal structures, variants and functions
- update comments and the content of the gro programmer guide for better
understanding
- remove needless check and redundant comments
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Junjie Chen <junjie.j.chen@intel.com>
This patch removes table id parameter from all the flow
classify apis to reduce the complexity alongwith some code
cleanup.
The validate api is exposed as public api to allow user
to validate the flow before adding it to the classifier.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This trivial patch fixes a typo in sample apps guide, in
the kernel nic interface (kni) section.
Using "-config", as it is now today in this doc, will not
work and will emit an error; it should be "--config" instead,
and this patch fixes it accordingly.
Fixes: d0dff9ba44 ("doc: sample application user guide")
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Current wording regarding actions and flow rules doesn't make sense.
Signed-off-by: Roy Franz <roy.franz@cavium.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Fix trivial typo (an -> and) in description of service core masks.
Signed-off-by: Roy Franz <roy.franz@cavium.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Fix the mismatch of two table's title and content
Fixes: fc1f2750a3 ("doc: programmers guide")
Signed-off-by: Gong Deli <gnnnnng@gmail.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Repeated occurrences of 'the'.
The change was obtained using the following command:
sed -i "s;the the ;the ;" `git grep -l "the "`
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
The DPDK uses the Open Source BSD-3-Clause license for the core libraries
and drivers. The kernel components are naturally GPLv2 licensed.
Many of the files in the DPDK source code contain the full text of the
applicable license. For example, most of the BSD-3-Clause files contain a
full copy of the BSD-3-Clause license text.
Including big blocks of License headers in all files blows up the source
code with mostly redundant information. An additional problem is that even
the same licenses are referred to by a number of slightly varying text
blocks (full, abbreviated, different indentation, line wrapping and/or
white space, with obsolete address information, ...) which makes validation
and automatic processing a nightmare.
To make this easier, DPDK uses of a single line reference to
Unique License Identifiers in source files as defined by the Linux
Foundation's SPDX project https://spdk.org.
Adding license information in this fashion, rather than adding full license
text, can be more efficient for developers; decreases errors; and improves
automated detection of licenses. The current set of valid, predefined SPDX
identifiers is set forth on the SPDX License List at
https://spdx.org/licenses/.
For example, to label a file as subject to the BSD-3-Clause license,
the following text would be used as the top line of the file.
SPDX-License-Identifier: BSD-3-Clause
Note: Any new file contributions in DPDK shall adhere to the above scheme.
It is also recommended to replace or at least amend the existing license
text in the code with SPDX-License-Identifiers.
Any exception to DPDK IP policies shall be approved by DPDK tech board and
DPDK Governing Board. Steps for any exception approval:
1. Mention the appropriate license identifier form SPDX. If the license is
not listed in SPDX Licenses. It is the submitters responsibiliity to get
it first listed.
2. Get the required approval from the DPDK Technical Board. Technical board
may advise the author to check alternate means first. If no other
alternatives are found and the merit of the contributions are important
for DPDK's mission, it may decide on such exception with two-thirds vote
of the members.
3. Technical board then approach Governing board for such limited approval
for the given contribution only.
Any approvals shall be documented in "licenses/exceptions.txt" with record
dates.
Note: From the legal point of view, this patch is supposed to be only a
change to the textual representation of the license information, but in no
way any change to the actual license terms. With this patch applied, all
files will still be licensed under the same terms they were before.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The DPDK needs to stay up to date with current LTS Linux kernel support.
If the kernel is older than LTS it is likely to be insecure and buggy.
Therefore only require DPDK to work on oldest LTS kernel.
If distribution vendors want to support DPDK on older kernels, that is
their choice. But the upstream source does not need to be cluttered
with support for this.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Add template release notes for DPDK 18.02 with inline
comments and explanations of the various sections.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
The PDF cannot be built because of some images integration being
forced as SVG. They are converted for PDF format, so the extension
must be a wildcard in the RST file.
Fixes: f6010c7655 ("doc: add GSO programmer's guide")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Add deprecation notice to highlight a future change in the
default configuration behavior for flexible payload for RSS.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Andrey Chilikin <andrey.chilikin@intel.com>
Fix an error in DPDK programmer's guide (EAL section):
it should be rte_thread_get_affinity() instead of
rte_pthread_get_affinity().
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch fixes a trivial typo in ip pipeline app guide.
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Following agreement at the DPDK Technical Board meeting of 2017-10-13 [1],
update the documentation with the ABI/API policy changes.
[1] http://dpdk.org/ml/archives/dev/2017-October/079961.html
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Update deprecation notice for the new ethdev offloads API.
Deprecation of the old offloads API is set to 18.05.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
These changes were planned for 17.11 but were proposed too late.
Postpone those to v18.02 instead.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
This commit adds a section to the docs listing the mempool
device PMDs available.
It then adds the octeontx fpavf mempool PMD to the listed mempool
devices.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This commit adds a section to the docs listing the platform
guide for the PMDs.
It then adds the octeontx platform guide to the listed platform
devices.
Patch also removes platform specific duplicate setup information from
eventdev/octeontx.rst, nics/octeontx.rst and update to
plaform/octeontx.rst.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This updates mlx4 documentation and DPDK release notes
to reflect the PMD support for rdma-core from linux-rdma.
- PMD is now freed from Mellanox OFED and now only depends on the
public rdma-core package (v15 and above) instead.
(see https://github.com/linux-rdma/rdma-core/releases)
This PMD should run under Linux v4.14 and above.
- In case any of the above requirements can't be satisfied,
Mellanox OFED v4.2 and above also provide an updated rdma-core
as well back-ported kernel modules for most Linux distributions
and previous Linux versions.
(see http://www.mellanox.com/page/products_dyn?product_family=26).
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This commit removes the stale MLX4_INLINE_RECV_SIZE environment
variable from the documentation.
Fixes: 056eaf2e6d ("net/mlx4: drop inline receive support")
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The feature was added at the end of the table.
And the description was between the anchor _nic_features_timesync
and its title.
It is moved near related features with a new anchor.
It is also renamed from "mbuf fast free" to "fast mbuf free".
Fixes: d6f90afd30 ("ethdev: add mbuf fast free Tx offload")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The net PMD overview table is big and required to be shrunk.
The crypto PMD tables had variable column sizes: the latest
columns were smaller.
The minimum width is set to 0.9em without any forced padding.
The maximum width is set to 2em.
The width of the first column set by sphinx is overridden to 0
for full elasticity.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
Since the release notes has a new section for removed items,
the dom0 removal notice can be moved there.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
A new library of the IPsec Multi-buffer library has been
released (0.47), which is used by the AESNI GCM PMD.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch fixes a trivial typo in DPDK programmer's guide:
it should be rte_cpu_get_features() instead of rte_cpu_get_feature().
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This is a wrapper to Linux kernel get_maintainer.pl file and only
supports parsing MAINTAINERS file (no git fallback etc..)
Requires DPDK_GETMAINTAINER_PATH devel config option set, please check
devtools/load-devel-config.
DPDK_GETMAINTAINER_PATH should be full path to the get_maintainer.pl
script, like:
DPDK_GETMAINTAINER_PATH=~/linux/scripts/get_maintainer.pl
Can be used individually:
./devtools/get-maintainer.sh <my.patch>
Or via git send-email, to add maintainers automatically:
git send-email --to-cmd ./devtools/get-maintainer.sh \
--cc dev@dpdk.org HEAD -4
Currently there is an ugly workaround to be able to use Linux script out
of the kernel tree, later better method can replace it.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
The Mellanox drivers were requiring MOFED at compilation time.
It is now possible to use the upstream rdma-core package.
So the dependency option is renamed in the build tool.
Fixes: 43e9d9794c ("net/mlx5: support upstream rdma-core")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Add programmer's guide doc to explain the use of the
Event Ethernet Rx Adapter library.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The Flow Classify Library Programmers Guide documents
librte_flow_classify.
The Flow Classify Sample Application Guide documents the
flow_classify sample application which is used to
demonstrate the use of the Flow Classify Library,
librte_flow_classify.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
As the rte_flow is a new complex module in the DPDK.
In order to ease developers in to using this feature
it was suggested to supply a simple howto doc.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This application shows a simple usage of the
rte_flow API for hardware filtering offloading.
In this demo we are filtering specific IP to
specific target queue, while sending all the
rest of the packets to other queue.
Signed-off-by: Ori Kam <orika@mellanox.com>
Move the vdev bus from lib/librte_eal to drivers/bus.
As the crypto vdev helper function refers to data structure
in rte_vdev.h, so we move those helper function into drivers/bus
too.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Remove rte_cryptodev_create_vdev() for duplication.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Introduce a new iommu-support parameter to Vhost PMD that
passes the RTE_VHOST_USER_IOMMU_SUPPORT flag at vhost
device register time.
Default value is 0, meaning that IOMMU support is disabled
if not specified explicitly.
Example to enable IOMMU support for a given device:
--vdev 'net_vhost0,iface=/tmp/vhost-user2,iommu-support=1'
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Tested-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Qemu versions from v2.7.0 to v2.9.0 have their reply-ack protocol
feature implementation broken with multiqueue. The reply-ack
protocol feature is optional except for IOMMU feature.
This patch introduce a new RTE_VHOST_USER_IOMMU_SUPPORT flag to
enable VIRTIO_F_IOMMU_PLATFORM virtio feature.
By default, the IOMMU support is now disabled.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Tested-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
The description of i40e 16 byte descriptor is not clear
enough. Add more details.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Fix a strange behavior from the NIC, when the flow starts with a VXLAN
layer with a VNI equals to zero all the traffic will match within this
rule.
Fixes: 2e709b6aa0 ("net/mlx5: support VXLAN flow item")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
API and ABI of mempool library has been changed in 17.11.
Fixes: 02604520b2 ("mempool: remove unused flags argument")
Fixes: 0cc0f8aaa3 ("mempool: change flags from int to unsigned int")
Fixes: 6eac187bff ("mempool: add flags arg in xmem size and usage")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The wording changes have been done in the API without breaking
the ABI. The deprecated fields and symbols can be removed later
when an another ABI change will be required.
The deprecation notice can be removed.
The release notes describe the new available API with IOVA wording.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Renamed data type from phys_addr_t to rte_iova_t.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Rename buf_physaddr to buf_iova.
Keep the deprecated name in an anonymous union to avoid breaking
the API.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add new Introduction Section into the sample app guides.
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Moved duplicated, and occasionally outdated, doc sections from each
of the sample app guides chapters to a common chapter at the start.
This reduces the duplication in the docs and provides a single
point of reference for compiling the sample apps.
Signed-off-by: Herakliusz Lipiec <herakliusz.lipiec@intel.com>
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Update software event device documentation to include use of service
cores for event distribution.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Update the guide with event queue configuration and event enqueue
operation.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The PCI lib defines the types and methods allowing to use PCI elements.
The PCI bus implements a bus driver for PCI devices by constructing
rte_bus elements using the PCI lib.
Move the relevant code out of the EAL to its expected place.
Libraries, drivers, unit tests and applications are updated to use the
new rte_bus_pci.h header when necessary.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Do not expose the minute implementations of PCI parsing.
This leaves only the all-purpose rte_pci_addr_parse, which is simpler to
use.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Some devices may not support or fail setting VLAN offload
configuration based on dynamic circumstances so the
vlan_offload_set_t vector is modified to return an int so
the caller can determine success or not.
rte_eth_dev_set_vlan_offload is updated to return the
value provided by the vector when called along with restoring
the original offload configs on failure.
Existing vlan_offload_set_t vectors are modified to return
an int. Majority of cases return 0 but a few that actually
can fail now return their failure codes.
Finally, a vlan_offload_set_t vector is added to virtio
to facilitate dynamically turning VLAN strip on or off.
Signed-off-by: David Harton <dharton@cisco.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Configuring UAR as IO-mapped makes maximum throughput decline by
noticeable amount. If UAR is configured as write-combining register,
a write memory barrier is needed on ringing a doorbell.
rte_wmb() is mostly effective when the size of a burst is comparatively
small. Revert the register back to write-combining and enforce a write
memory barrier instead, except for vectorized Tx burst routines.
Application can change it by setting MLX5_SHUT_UP_BF under its own
necessity.
Fixes: 9f9bebae55 ("net/mlx5: don't map doorbell register to write combining")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated for a while.
As explained in [1], these flags were kept to let the applications and
PMDs move to the new flag. There is also a need to support Rx vlan
offload without vlan strip (at least for the ixgbe driver).
This patch renames the old flags for this feature, knowing that some
PMDs were using PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT to indicate that
the vlan tci has been saved in the mbuf structure.
It is likely that some PMDs do not set the proper flags when doing vlan
offload, and it would be worth making a pass on all of them.
Link: [1] http://dpdk.org/ml/archives/dev/2017-June/067712.html
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This flag is not necessary at the ether layer anymore.
Buses are able to advertise their hotplug support. The ether layer can
rely upon this capability instead of a special flag.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
When using "show port xstats all" command to show xstats, the output
is usually too long to obtain what you really want, especially when
multi-queue is enabled.
Added an option to set whether zero values should be displayed
or not for xstats. The "set xstats-hide-zero on|off" command enables
the user to decide if the zero values should be shown while
displaying xstats.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Signed-off-by: Elza Mathew <elza.mathew@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Document how DPDK app should handle the event of switch quit-restart
to resume its network without an app-level restart.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add Marvell International Ltd. to the copyright holders.
Fixes: 0ddc9b815b ("net/mrvl: add net PMD skeleton")
Fixes: 1a286a1139 ("doc: add mrvl NIC guide")
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Ipsec-secgw application is modified so that it can support
following type of actions for crypto operations
1. full protocol offload using crypto devices.
2. inline ipsec using ethernet devices to perform crypto operations
3. full protocol offload using ethernet devices.
4. non protocol offload
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
The crypto action is specified by an application to request
crypto offload for a flow.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Reviewed-by: John McNamara <john.mcnamara@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The ESP header is required for IPsec crypto actions.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Removes any dependency of librte_cryptodev on the PCI device
infrastructure code and removes the functions which were virtual
device specific.
Updates QAT crypto PMD to remove dependencies on rte_cryptodev_pci.h
and replaces those calls with the new bus independent functions.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Removes any dependency of librte_cryptodev on the virtual device
infrastructure code and removes the functions which were virtual
device specific.
Updates all virtual PMDs to remove dependencies on rte_cryptodev_vdev.h
and replaces those calls with the new bus independent functions.
Due to these changes, the cryptodev ABI version gets bumped.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Tomasz Duszynski <tdu@semihalf.com>
Adds new PMD assist functions which are bus independent for driver to
create and destroy new device instances.
Also includes function to parse parameters which can be passed to
driver on device initialisation.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Fixes: c711ccb309 ("ivshmem: remove library and its EAL integration")
Fixes: e8009a077d ("doc: group classification libraries in doxygen index")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add Rx adapter queue add and delete API for both generic eth_devices as
well as HW backed eth_octeontx which supports direct event injection to
event device.
The HW injected event needs to be converted into mbuf, previously this
was done in eth_octeontx during rx_burst now it is moved to
event_octeontx as events from Rx adapter are dequeued directly from
event device.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Reviewed-by: Nikhil Rao <nikhil.rao@intel.com>
