As part of device probe, check if management FW crash dump logs are
available. If available, then log an warning message and update the
epoch value too. A new struct ecore_mdump_info is added to populate
dump info including the new "reason" field by reading shared memory
region.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add new option called external PBL (page base list) to ecore_chain_alloc
for future use. Mark chain as external if external PBL is provided.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add macros PTR_LO and PTR_HI (for converting pointer to HI and LOW bits for
passing to FW hsi handles).
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
In order to improve Tx switching performance an additional HSI parameter
called same-as-last-id is introduced. This resource allows FW caching the
txqs packet properties. Driver needs to set same-as-last-id to be equal to
the qzone.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Receive indication that VFs are malicious and pass it to the
caller/clients and stop serving those VF's additional resource requests.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add a request for PF Function Level Reset (FLR) before a load request
Fix the location of the PF FLR initiation to be after ecore_get_hw_info()
(which invokes ecore_hw_info_port_num())
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Apparently VF over Legacy PF doesn't work, as VF would fail after
getting the initial rejection message [instead of sending an additional
one where it asks for a FW override and see if it works].
Fixes: 22d07d939c ("net/qede/base: update")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add a check and fail the VF's probe request if VF is already in
VF_ACQUIRED state.
Fixes: 22d07d939c ("net/qede/base: update")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Rx queue access is still done prior to the index being validated by PF.
Hence move Rx queue and status block validation check before accessing
Rx queue to prevent malicious VFs from using out-of-bound queue indices.
Fixes: 98bc693e19 ("net/qede/base: change queue start")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Fix to return error code ECORE_INVAL instead of 0 when EQ elements
is too large as done elsewhere in this function.
Fixes: 22d07d939c ("net/qede/base: update")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
There are certain conditions under which VF would infinitely send
ACQUIRE messages, as it will fail to understand that PF has rejected
the ACQUIRE request. Fix to reject multiple acquisition requests by VF.
Fixes: 22d07d939c ("net/qede/base: update")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Remove unmeaningful function ID value in print.
Don't print the number of Multicast filters as part of Acquire response,
as this is an obsolete field which isn't enforced by PF.
Fixes: 86a2265e59 ("qede: add SRIOV support")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
The QEDE PMD now uses unzipped firmware file eliminating the dependency
on zlib. Hence remove LDLIBS entry form the Makefile and enable qede
PMD by default.
Fixes: 6adac0bf30 ("qede: add missing external dependency and disable by default")
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
o Fix the fastpath status block index such that each queue pair shares
the same index value.
o Add ecore_vf_get_num_sbs() API that returns the number of status
blocks assigned by PF. Use that to decide how many VF queues can be
advertised. Additionally, restrict maximum number of VF queues to 16
for 100G VF case.
Fixes: 2ea6f76aff ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Add support to send PF FLR request to the management firmware to
bringup the device in clean slate. This cleanup is necessary
in some corner cases where the device would be left in a bad
state from its previous operations. The driver will send PF FLR
request before slowpath initialization.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Add support to allow MTU change on a deactivated vport in
the qede/base driver and the core driver shall utilize the same.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
This patch updates the base driver and incorporates necessary changes
required to bring in the new firmware 8.10.9.0.
In addition, it would allow driver to add new functionalities that might
be needed in future.
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
This patch adds API support for NIC selftests (BIST) and APIs to retrieve
GPIO info, sensor data like temperature, MBA versions, ECC events etc.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Add ecore_mcp_mb_lock() and ecore_mcp_mb_unlock() APIs to ensure
a single thread is accessing MFW mailbox.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Change ecore_mcp_cmd_and_union() to accept pointer to a structure rather
than accepting multiple arguments. A new struct ecore_mcp_mb_params is
added for that purpose. Also make this function static. This change is
mostly keeping in mind the future requests which needs additional
arguments.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Change details:
- adds new comments
- modifies some of the existing comments
- abstract code into macros
- split long lines
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
In case of attention from a signal that's represented by multiple bits
in misc AEU, add the format string which is populated with proper index
and resulting prints will show string as a prefix.
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
- add the hardware software interface(HSI) changes
- add register definitions
These will be required for 8.10.9.0 FW upgrade.
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Replaced CONFIG_QED_BINARY_FW with CONFIG_ECORE_BINARY_FW.
Use CONFIG_ECORE_BINARY_FW and CONFIG_ECORE_ZIPPED_FW defines as
required.
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Added ecore_hsi_debug_tools.h, ecore_hsi_init_func.h,
ecore_hsi_init_tool.h files. Rearranged code from ecore_hsi_common.h and
ecore_hsi_tools.h to the new files. Removed unused code.
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
This patch enables VF to VF traffic with unmatched destination addresses.
The steps to enable this are:
- Enable promiscuous mode filter settings.
- Check for VF mode and enable promiscuous mode settings for VF.
- Check filter configuration to ensure conflicting filter modes
are not set.
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Under certain scenarios, management firmware (MFW) periodically polls
the driver for LAN statistics. This patch implements the osal hook to
fill in the stats.
Fixes: ec94dbc573 ("qede: add base driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Some 64-bit variables are printed for debug.
%PRIx64 qualifier must be used because %lx is not long enough
on 32-bit systems
Fixes: ec94dbc573 ("qede: add base driver")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Harish Patil <harish.patil@qlogic.com>
This patch adds LLDP and DCBX capabilities to the qede PMD.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
The physical link is handled by the management Firmware.
This patch lays the infrastructure for interrupt/attention handling in
the driver, as link change notifications arrive via async interrupts,
as well as the handling of such notifications. It adds async event
notification handler interfaces to the PMD.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
This patch adds the features to supports configuration of various Layer 2
elements, such as channels and filtering options.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
The base driver is the backend module for the QLogic FastLinQ QL4xxxx
25G/40G CNA family of adapters as well as their virtual functions (VF)
in SR-IOV context.
The purpose of the base module is to:
- provide all the common code that will be shared between the various
drivers that would be used with said line of products. Flows such as
chip initialization and de-initialization fall under this category.
- abstract the protocol-specific HW & FW components, allowing the
protocol drivers to have clean APIs, which are detached in its
slowpath configuration from the actual Hardware Software Interface(HSI).
This patch adds a base module without any protocol-specific bits.
I.e., this adds a basic implementation that almost entirely falls under
the first category.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
