A sequence lock (seqlock) is a synchronization primitive which allows
for data-race free, low-overhead, high-frequency reads, suitable for
data structures shared across many cores and which are updated
relatively infrequently.
A seqlock permits multiple parallel readers. A spinlock is used to
serialize writers. In cases where there is only a single writer, or
writer-writer synchronization is done by some external means, the
"raw" sequence counter type (and accompanying rte_seqcount_*()
functions) may be used instead.
To avoid resource reclamation and other issues, the data protected by
a seqlock is best off being self-contained (i.e., no pointers [except
to constant data]).
One way to think about seqlocks is that they provide means to perform
atomic operations on data objects larger than what the native atomic
machine instructions allow for.
DPDK seqlocks (and the underlying sequence counters) are not
preemption safe on the writer side. A thread preemption affects
performance, not correctness.
A seqlock contains a sequence number, which can be thought of as the
generation of the data it protects.
A reader will
1. Load the sequence number (sn).
2. Load, in arbitrary order, the seqlock-protected data.
3. Load the sn again.
4. Check if the first and second sn are equal, and even numbered.
If they are not, discard the loaded data, and restart from 1.
The first three steps need to be ordered using suitable memory fences.
A writer will
1. Take the spinlock, to serialize writer access.
2. Load the sn.
3. Store the original sn + 1 as the new sn.
4. Perform load and stores to the seqlock-protected data.
5. Store the original sn + 2 as the new sn.
6. Release the spinlock.
Proper memory fencing is required to make sure the first sn store, the
data stores, and the second sn store appear to the reader in the
mentioned order.
The sn loads and stores must be atomic, but the data loads and stores
need not be.
The original seqlock design and implementation was done by Stephen
Hemminger. This is an independent implementation, using C11 atomics.
For more information on seqlocks, see
https://en.wikipedia.org/wiki/Seqlock
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
If no DMA request is completed, the ring_idx of the last completed
operation need returned by last_idx parameter. This patch adds
testcase for it.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Tested-by: Kevin Laatz <kevin.laatz@intel.com>
This patch introduces the IPv4/IPv6 ECN modify field support, and
adds the testpmd CLI commands support.
Usage:
modify_field op set dst_type ipv4_ecn src_type ...
For example:
flow create 0 ingress group 1 pattern eth / ipv4 / end actions
modify_field op set dst_type ipv4_ecn src_type value src_value
0x03 width 2 / queue index 0 / end
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Introduce a testpmd API so that drivers can register specific commands.
A driver can list some files to compile with testpmd, by setting them
in the testpmd_sources (driver local) meson variable.
drivers/meson.build then takes care of appending this to a global meson
variable, and adding the driver to testpmd dependency.
Note: testpmd.h is fixed to that it is self sufficient when being
included.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
All those symbols don't need to be global, plus it was hiding unused
code such as:
- cmd_set_conntrack_dir_set and cmd_set_conntrack_dir_conntrack in
cmdline.c,
- cmd_create_port_meter_g_action, cmd_create_port_meter_r_action,
cmd_create_port_meter_y_action in cmdline_mtr.c,
Mark those symbols as static.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
The help message of create meter command is incomplete,
lack of policy_id param, update help string.
Fixes: f29fa2c59b ("app/testpmd: support policy actions per color")
Cc: stable@dpdk.org
Signed-off-by: Jin Liu <jin.liu@corigine.com>
Signed-off-by: Chaoyong He <chaoyong.he@corigine.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
Calling Rx/Tx functions on a stopped queue is not supported.
Do not run packet forwarding for streams that use stopped queues.
Each stream has a read-only "disabled" field,
so that lcore function can skip such streams.
Forwarding engines can set this field
using a new "stream_init" callback function
by checking relevant queue states,
which are stored along with queue configurations
(not all PMDs implement rte_eth_rx/tx_queue_info_get()
to query the state from there).
Fixes: 5f4ec54f1d ("testpmd: queue start and stop")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
When a port was closed, indirect actions could remain
with their handles no longer valid.
If a newly attached device was assigned the same ID as the closed port,
those indirect actions became accessible again.
Any attempt to use them resulted in an undefined behavior.
Automatically flush indirect actions when a port is closed.
Fixes: 4b61b8774b ("ethdev: introduce indirect flow action")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Aman Singh <aman.deep.singh@intel.com>
Add macro MIN_TOTAL_NUM_MBUFS (1024) to indicate
what the value of total-num-mbufs should bigger than.
Fixes: c87988187f ("app/testpmd: add --total-num-mbufs option")
Cc: stable@dpdk.org
Signed-off-by: Mingxia Liu <mingxia.liu@intel.com>
Acked-by: Yuying Zhang <yuying.zhang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
Parameters to this static helper can't be NULL.
str has already been dereferenced in caller.
dst and size point to variable in stack.
Fixes: 169a9fed1f ("app/testpmd: fix hex string parser support for flow API")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
The GRO/GSO library doesn't re-calculate checksums for
merged/fragmented packets. If users want the packets to
have correct IP checksums, they should select HW IP
checksum calculation for the port which the packets are
transmitted to. But if the port doesn't support HW IP
checksum, users may perform a SW IP checksum.
Fixes: b7091f1dcf ("app/testpmd: enable the heavyweight mode TCP/IPv4 GRO")
Fixes: 52f38a2055 ("app/testpmd: enable TCP/IPv4 VxLAN and GRE GSO")
Cc: stable@dpdk.org
Signed-off-by: Wenwu Ma <wenwux.ma@intel.com>
Reviewed-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Wei Ling <weix.ling@intel.com>
Acked-by: Yuying Zhang <yuying.zhang@intel.com>
Starting or stopping a bonded port also starts or stops all active slaves
under the bonded port. If this port is a bonded device, we need to modify
the port status of all slaves.
Fixes: 0e545d3047 ("app/testpmd: check stopping port is not in bonding")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Aman Singh <aman.deep.singh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>
- move RSA padding into separate struct.
More padding members should be added into padding,
therefore having separate struct for padding parameters will
make this more readable.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
- Moved DH operation type to DH operation struct.
Operation type (PUBLIC_KEY_GENERATION, SHARED_SECRET) should
be free to choose for any operation. One xform/session should
be enough to perform both DH operations, if op_type would be xform
member, session would have to be created twice for the same
group. Similar problem would be observed in sessionless case.
Additionally, it will help extend DH to support Elliptic Curves.
- Changed order of Diffie-Hellman operation phases.
Now it corresponds with the order of operations.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
- Separated key exchange enum from asym op type.
Key exchange and asymmetric crypto operations like signatures,
encryption/decryption should not share same operation enum as
its use cases are unrelated and mutually exclusive.
Therefore op_type was separate into:
1) operation type
2) key exchange operation type
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Allowing auth generation followed by encryption mode.
--optype auth-then-cipher can take cipher-op as encrypt
and auth-op as generate now.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
FLR timeout register is not used in 5GNR FPGA.
Signed-off-by: Hernan Vargas <hernan.vargas@intel.com>
Reviewed-by: Nicolas Chautru <nicolas.chautru@intel.com>
This patch supports raw buffer APIs testing for
PDCP test cases.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
PMD name for DPAA raw buffer crypto driver test cases is
updated with correct name.
Fixes: cd8166c28c ("test/crypto: add raw API test for dpaax")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Patch adds unit tests for IPv6 flow label set & copy
operations.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Added cases to test anti replay for inline IPsec processing
with and without extended sequence number support.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Added more inline IPsec functional verification cases.
These cases do not have known vectors but are verified
using encap + decap test for all the algo combinations.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Added unit test cases for IP reassembly of inline IPsec
inbound scenarios.
In these cases, known test vectors of fragments are first
processed for inline outbound processing and then received
back on loopback interface for inbound processing along with
IP reassembly of the corresponding decrypted packets.
The resultant plain text reassembled packet is compared with
original unfragmented packet.
In this patch, cases are added for 2/4/5 fragments for both
IPv4 and IPv6 packets. A few negative test cases are also added
like incomplete fragments, out of place fragments, duplicate
fragments.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Added combined encap and decap test cases for various algorithm
combinations
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Added test cases for inline Inbound protocol offload
verification with known test vectors from Lookaside mode.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
A new test suite is added in test app to test inline IPsec protocol
offload. In this patch, predefined vectors from Lookaside IPsec test
are used to verify the IPsec functionality without the need of
external traffic generators. The sent packet is loopbacked onto the same
interface which is received and matched with the expected output.
The test suite can be updated further with other functional test cases.
In this patch encap only cases are added.
The testsuite can be run using:
RTE> inline_ipsec_autotest
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Test eventdev app is updated to add new option for asymmetric
crypto ops for event crypto adapter.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Test app is updated to add cases for asymmetric crypto
sessions for event crypto adapter.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Used the new API rte_cryptodev_set_session_event_mdata to set
event crypto metadata from the applications (app/test and
app/test-eventdev) instead of using session userdata.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Check if the returned op is NULL because of failure,
before using it and causing a segmentation fault.
Fixes: 4c99481f49 ("app/test: add ZUC")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
According to RFC791,the options may appear or not in datagrams.
They must be implemented by all IP modules (host and gateways).
What is optional is their transmission in any particular datagram,
not their implementation. So we have to deal with it during the
fragmenting process.
Add some test data for the IPv4 header optional field fragmenting.
Signed-off-by: Huichao Cai <chcchc88@163.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Within ACL rule IPv6 address can be represented in different ways:
either as 4x4B fields, or as 2x8B fields.
Till now, only first format was supported.
Extend test-acl to support both formats, mainly for testing and
demonstrating purposes.
To control desired behavior '--ipv6' command-line option is extended
to accept an optional argument:
To be more precise:
'--ipv6' - use 4x4B fields format (default behavior)
'--ipv6=4B' - use 4x4B fields format (default behavior)
'--ipv6=8B' - use 2x8B fields format
Also replaced home brewed IPv4/IPv6 address parsing with inet_pton() calls.
Signed-off-by: Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>
Current pmd_perf_autotest() in continuous mode tries
to enqueue MAX_TRAFFIC_BURST completely before starting
the test. Some drivers cannot accept complete
MAX_TRAFFIC_BURST even though rx+tx desc count can fit it.
This patch changes behaviour to stop enqueuing after few
retries.
Fixes: 002ade70e9 ("app/test: measure cycles per packet in Rx/Tx")
Cc: stable@dpdk.org
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Forcing inlining in test_ring_enqueue and test_ring_dequeue can cause
the compiled code to grow extensively when compiled with no optimization
(-O0 or -Og). This is default in the meson's debug configuration. This
can collide with compiler bugs and cause issues during linking of unit
tests where the api_type or esize are non-const variables causing
inlining cascade. In perf tests this is not the case in perf-tests as
esize and api_type are const values.
One such case was discovered when porting DPDK to RISC-V. GCC 11.2 (and
no fix still in 12.1) is generating a short relative jump instruction
(J <offset>) for goto and for loops. When loop body grows extensively in
ring test, the target offset goes beyond supported offfset of +/- 1MB
from PC. This is an obvious bug in the GCC as RISC-V has a
two-instruction construct to jump to any absolute address (AUIPC+JALR).
However there is no reason to force inlining as the test code works
perfectly fine without it.
GCC has a bug report for a similar case (with conditionals):
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=93062
Fixes: a9fe152363 ("test/ring: add custom element size functional tests")
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>
Establish unit test for testing thread api. Initial unit tests
for rte_thread_{get,set}_affinity_by_id().
Signed-off-by: Narcisa Vasile <navasile@linux.microsoft.com>
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Added test cases to test changing of queue QoS attributes priority,
weight and affinity at runtime.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Quiesce event ports used by the workers core on exit to free up
any outstanding resources.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Event ports are configured to implicitly release the scheduler contexts
currently held in the next call to rte_event_dequeue_burst().
A worker core might still hold a scheduling context during exit, as the
next call to rte_event_dequeue_burst() is never made.
This might lead to deadlock based on the worker exit timing and when
there are very less number of flows.
Add clean up function to release any scheduling contexts held by the
worker by using RTE_EVENT_OP_RELEASE.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Remove rte_*_dev calls from signal handler callback as signal handlers
are supposed to be light weight.
Split ethdev teardown into Rx and Tx sections, wait for
workers to finish processing after disabling Rx to allow workers
to complete processing currently held packets.
Verified SW event device on ARM64 using the following command:
./build/app/dpdk-test-eventdev -l 7-23 -s 0xf00 --vdev=event_sw0
-a 0002:02:00.0 -- --prod_type_ethdev --nb_pkts=0 --verbose 2
--test=pipeline_queue --stlist=o --wlcores 16-23
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The macro RTE_ETHER_MIN_LEN isn't the minimum value of MTU. But testpmd
used it when execute 'port config mtu 0 xx' cmd. This patch fixes it.
Fixes: 1bb4a528c4 ("ethdev: fix max Rx packet length")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
In function 'fwd_stats_display', if function 'rte_eth_stats_get' fails,
'stats' is uncertainty value. The display result will be abnormal.
This patch check the return value of 'rte_eth_stats_get' to avoid
display abnormal stats.
Fixes: 53324971a1 ("app/testpmd: display/clear forwarding stats on demand")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Aman Singh <aman.deep.singh@intel.com>
Enable ASan, this can greatly help identify leaks and buffer overflows.
Running unit tests relying on multiprocess is unreliable with ASan
enabled, so skip them.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
As described in bugzilla, ASan reports accesses to all memory segment as
invalid, since those parts have not been allocated with rte_malloc.
Move __rte_no_asan to rte_common.h and disable ASan on a part of the test.
Bugzilla ID: 880
Fixes: 6cc51b1293 ("mem: instrument allocator for ASan")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
In hash_readwrite_perf_autotest a single read and write operation is
benchmarked for both HTM and non HTM cases. However the result summary
only shows the HTM value. Therefore add the non HTM value for
completeness.
Fixes: 0eb3726ebc ("test/hash: add test for read/write concurrency")
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
Added test vector file for AES-128-GCM for
64B and 512B length buffers.
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
For decrypt, ICV mismatch can come as data is dummy and
latency will be calculated for error path. Hence populate
mbuf with test vector data.
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Extended support for asymmetric crypto perf throughput test.
Added support for new modulus lengths.
Added new parameter --modex-len.
Supported lengths are 60, 128, 255, 448. Default length is 128.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Added tunnel and transport AH known test vectors for
SHA256 HMAC.
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Added auth only and null cipher + auth under combined mode
for following combinations.
1. Tunnel IPv4
2. Transport IPv4
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
test_bpf_convert is being conditionally registered depending on the
presence of RTE_HAS_LIBPCAP except the UT unconditionally lists it as a
test to run.
When the UT runs test_bpf_convert test-dpdk can't find the registration
and assumes the DPDK_TEST environment variable hasn't been defined
resulting in test-dpdk dropping to interactive mode and subsequently
waiting for the remainder of the UT fast-test timeout period before
reporting the test as having timed out.
* unconditionally register test_bpf_convert,
* if ! RTE_HAS_LIBPCAP provide a stub test_bpf_convert that reports the
test is skipped similar to that done with the test_bpf test.
Fixes: 2eccf6afbe ("bpf: add function to convert classic BPF to DPDK BPF")
Cc: stable@dpdk.org
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Testpmd reads flex item configuration from a JSON file.
Flex item input link description is stored in testpmd
flow item format. For example, `eth type is 0x0800`.
The item description is placed into a general testpmd CLI
flow rule command template and parsed to convert string into
flow item object.
The patch adds the `actions` section to the flow rule template.
Fixes: 59f3a8acbc ("app/testpmd: add flex item commands")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
GTP header can be followed by an optional 32 bits extension.
GTP notifies about the extension presence through the E, S or PN
header bits.
Csum GTP header parser did not check the extension bits value.
The patch updates GTP header length if at-least one of the
extension bits is set.
Fixes: d8e5e69f3a ("app/testpmd: add GTP parsing and Tx checksum offload")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Aman Singh <aman.deep.singh@intel.com>
Replaced using strtoul with strtoull when converting to
64-bit mask field.
In Windows strtoul returns 32-bit values which cause an
issue with show RSS RETA.
Fixes: 66c594904a ("ethdev: support multiple sizes of redirection table")
Cc: stable@dpdk.org
Signed-off-by: Adham Masarwah <adham@nvidia.com>
Acked-by: Aman Singh <aman.deep.singh@intel.com>
Testpmd forwards packets in checksum mode that it needs to calculate
the checksum of each layer's protocol.
In process_inner_cksums, when parsing tunnel packets, inner L4 offset
should be outer_l2_len + outer_l3_len + l2_len + l3_len.
In process_outer_cksums, when parsing tunnel packets, outer L4 offset
should be outer_l2_len + outer_l3_len.
Fixes: e6b9d6411e ("app/testpmd: add SW L4 checksum in multi-segments")
Cc: stable@dpdk.org
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Yuying Zhang <yuying.zhang@intel.com>
Acked-by: Aman Singh <aman.deep.singh@intel.com>
Depending on number of jobs specified on command line, part of the
data buffer may not get searched, resulting in incorrect number of
matches being reported.
Additional change to ensure the "All Matches" summary outputs the
correct match start locations in the supplied data buffer.
Fixes: de06137cb2 ("app/regex: add RegEx test application")
Cc: stable@dpdk.org
Signed-off-by: Gerry Gribbon <ggribbon@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Currently dumpcap tries to initialize dpdk before parsing command line
arguments, this makes it impossible to check version or help without
having the primary process running already.
Signed-off-by: Ben Magistro <koncept1@gmail.com>
If the rte_eth_promiscuous_enable() fails, then log the error
and continue.
Coverity issue: 373662
Fixes: cbb44143be ("app/dumpcap: add new packet capture application")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
If conversion of cBPF to eBPF fails (in rte_bpf_convert)
then the test should not try and print the result.
Coverity issue: 373661
Fixes: 2eccf6afbe ("bpf: add function to convert classic BPF to DPDK BPF")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The mempool should be free when cleanup resources.
Signed-off-by: Tianli Lai <laitianli@tom.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Check lcore id value is not the maximum core supported.
Using lcore id without this check might cause
out of bound access inside the rte_eal_wait_lcore.
Coverity issue: 375841
Fixes: b2854d5317 ("app/pdump: support multi-core capture")
Cc: stable@dpdk.org
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The node clone API parameter 'name' is the new node's postfix name, not
the final node name, so it makes no sense to check it. And the new name
will be checked duplicate when calling API '__rte_node_register'.
And update the test case to call clone API twice to check the real name
duplicate.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
A pattern template creation shares the parsing mechanism with
a simple flow creation. The pattern template creation only consists
of pattern items while the flow creation continues with actions.
The parsing mechanism now accommodates both cases and allows to stop
at the item end token, which should not happen for the flow creation.
Fix parsing mechanism to differentiate between these two cases.
Bugzilla ID: 941
Fixes: 04cc665fab ("app/testpmd: add flow template management")
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Tested-by: Zhimin Huang <zhiminx.huang@intel.com>
Ops population functions are called in datapath. Keeping it common for
PDCP & DOCSIS would mean ops population would have additional
conditional checks causing the throughput reported to be lower than what
the PMD is capable of.
Separate out routine for IPsec cases and split vector population and op
preparation into two loops to allow 2 rte_rdtsc_precise() calls to
capture cycles consumed for memcpying the vector. Checking the cycle
count from the loop would mean more calls to the same API.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The number of QPs is limited by the number of cores, such that in
case the user requests more QPs than possible, the number of QPs
actually configured on the device is equal to the number of cores,
but the app tries to setup the original number of QPs.
Align the number of QPs setup'ed to the limited number.
Fixes: 424dd6c8c1 ("app/compress-perf: add weak functions for multicore test")
Cc: stable@dpdk.org
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Socket ID is obtained by function rte_compressdev_socket_id, which
returns it as integer, but is interpreted as unsigned byte integer.
change type from uint8_t to int.
Fixes: ed7dd94f7f ("compressdev: add basic device management")
Cc: stable@dpdk.org
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
An array of the size of total operations needed for the de/compression is
reserved for ops while enqueueing, although only first burst_size entries
of the array are used.
Reduce the size of the array allocated.
Fixes: b68a82425d ("app/compress-perf: add performance measurement")
Cc: stable@dpdk.org
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
In cyclecount main_loop function, each iteration it tries to
enqueue X ops, in case Y<X ops were enqueued, the rest of the
X-Y ops are moved to the beginning of the ops array, to preserve
ops order, and next Y ops are allocated for the next enqueue
action, the allocation of the ops occurs on the first Y entries
in the array, when it should have skipped the first X-Y
array entries and allocate the following Y entries.
Fix the allocation by adding the correct offset.
Fixes: 2695db95a1 ("test/compress: add cycle-count mode to perf tool")
Cc: stable@dpdk.org
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Constant value 1 has a size of 32 bits, and shifting it more than 32 bits
to the left overflows. 1ULL is needed to be able to get a 64-bit value.
Coverity ID: 375846
Fixes: 8751a7e983 ("efd: allow more CPU sockets in table creation")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
When ixgbe and bnxt are disabled, compilation was failing:
app/test-pmd/cmdline.c:9396:11: error:
variable 'vf_rxmode' set but not used
Fixes: 4cfe399f65 ("net/bnxt: support to set VF rxmode")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The structure "rte_flow_item_geneve_opt" is not a protocol header of
geneve tunnel option from rfc8926. The field "data" is a pointer
which points to the actual variable-length option data. So the
structure is not packed.
There is 4 bytes hole before the pointer in a 64-bit system. The
option header is just 4 bytes. When using offsetof() to get the
fixed part's size of option header, the wrong value 8 was got. When
constructing the encap header, a wrong size and offset was used due
to this hole.
With this commit, the fixed part's size is calculated explicitly
based on all fields.
Fixes: 55c074f3ba ("app/testpmd: support GENEVE option item")
Cc: stable@dpdk.org
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Reviewed-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Add testpmd support for the rte_flow_async_action_handle API.
Provide the command line interface for operations dequeue.
Usage example:
flow queue 0 indirect_action 0 create action_id 9
ingress postpone yes action rss / end
flow queue 0 indirect_action 0 update action_id 9
action queue index 0 / end
flow queue 0 indirect_action 0 destroy action_id 9
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add testpmd support for the rte_flow_pull API.
Provide the command line interface for pulling operations results.
Usage example: flow pull 0 queue 0
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add testpmd support for the rte_flow_push API.
Provide the command line interface for pushing operations.
Usage example: flow queue 0 push 0
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add testpmd support for the rte_flow_q_create/rte_flow_q_destroy API.
Provide the command line interface for enqueueing flow
creation/destruction operations. Usage example:
testpmd> flow queue 0 create 0 postpone no
template_table 6 pattern_template 0 actions_template 0
pattern eth dst is 00:16:3e:31:15:c3 / end actions drop / end
testpmd> flow queue 0 destroy 0 postpone yes rule 0
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add testpmd support for the rte_flow_table API.
Provide the command line interface for the flow
table creation/destruction. Usage example:
testpmd> flow template_table 0 create table_id 6
group 9 priority 4 ingress mode 1
rules_number 64 pattern_template 2 actions_template 4
testpmd> flow template_table 0 destroy table 6
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add testpmd support for the rte_flow_pattern_template and
rte_flow_actions_template APIs. Provide the command line interface
for the template creation/destruction. Usage example:
testpmd> flow pattern_template 0 create pattern_template_id 2
template eth dst is 00:16:3e:31:15:c3 / end
testpmd> flow actions_template 0 create actions_template_id 4
template drop / end mask drop / end
testpmd> flow actions_template 0 destroy actions_template 4
testpmd> flow pattern_template 0 destroy pattern_template 2
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add testpmd support for the rte_flow_configure API.
Provide the command line interface for the Flow management.
Usage example: flow configure 0 queues_number 8 queues_size 256
Implement rte_flow_info_get API to get available resources:
Usage example: flow info 0
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
The csum FWD mode parses any received packet to set mbuf offloads for
the transmitting burst, mainly in the checksum/TSO areas.
In the case of a tunnel header, the csum FWD tries to detect known
tunnels by the standard definition using the header's data and fallback
to check the packet type in the mbuf to see if the Rx port driver
already sign the packet as a tunnel.
In the fallback case, the csum assumes the tunnel is VXLAN and parses
the tunnel as VXLAN.
When the GENEVE tunnel was added to the known tunnels in csum, its
parsing trial was wrongly located after the pkt type detection, causing
the csum to parse the GENEVE header as VXLAN when the Rx port set the
tunnel packet type.
Remove the fall back case to VXLAN.
Log error of unrecognized tunnel if no tunnel was parsed successfully.
Fixes: c10a026c3b ("app/testpmd: introduce vxlan parsing function in csum fwd engine")
Cc: stable@dpdk.org
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Aman Singh <aman.deep.singh@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
In bond, start or stop slave port should be operated by bonding port.
This patch add port_is_bonding_slave in start_port function.
Fixes: 0e545d3047 ("app/testpmd: check stopping port is not in bonding")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
If a initial process for the bonding device is like:
rte_eth_dev_configure
rte_eth_dev_set_mtu
queue setup and start, etc.
Pass the vdev args to application, and init bonding device only.
-a 0000:af:00.0 --vdev="net_bonding0,mode=2,slave=0000:af:00.0"
It will fail and complain for the slave device
"Port 0 must be configured before MTU set"
Test can be reproduced with ovs.
Fixes: b26bee10ee ("ethdev: forbid MTU set before device configure")
Cc: stable@dpdk.org
Signed-off-by: Junjie Wan <wanjunjie@bytedance.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Min Hu (Connor) <humin29@huawei.com>
Added test case to verify L4 checksum offload in IPsec transport mode.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Add test cases to verify TTL and hop limit decrement with lookaside
IPsec offload.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
This patch fixes misspelled RTE_RSA_KEY_TYPE_QT,
this will prevent checkpach from complaining wherever
change to RSA is being made.
Fixes: 26008aaed1 ("cryptodev: add asymmetric xform and op definitions")
Cc: stable@dpdk.org
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add test cases to verify copy and set DSCP with
IPv4 and IPv6 tunnels.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
In crypto producer mode, producer core enqueues cryptodev with software
generated crypto ops and worker core dequeues crypto completion events
from the eventdev. Event crypto metadata used for above processing is
pre-populated in each crypto session.
Parameter --prod_type_cryptodev can be used to enable crypto producer
mode. Parameter --crypto_adptr_mode can be set to select the crypto
adapter mode, 0 for OP_NEW and 1 for OP_FORWARD.
This mode can be used to measure the performance of crypto adapter.
Example:
./dpdk-test-eventdev -l 0-2 -w <EVENTDEV> -w <CRYPTODEV> -- \
--prod_type_cryptodev --crypto_adptr_mode 1 --test=perf_atq \
--stlist=a --wlcores 1 --plcores 2
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
For some DMA HW devices, e.g. those using the idxd driver, the maximum
burst size is configurable, which can lead to test failures if the value
is set too small. Add explicit check for this to give reasonable error
messages for devices which need their config adjusted.
Fixes: 1b86a66a30 ("test/dma: add more comprehensive copy tests")
Fixes: 8fa5d26839 ("test/dma: add burst capacity test")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
rte_gpu_mem_cpu_map() exposes a GPU memory area to the CPU.
In gpudev communication list this is useful to store the
status flag.
A communication list status flag allocated on GPU memory
and mapped for CPU visibility can be updated by CPU and polled
by a GPU workload.
The polling operation is more frequent than the CPU update operation.
Having the status flag in GPU memory reduces the GPU workload polling
latency.
If CPU mapping feature is not enabled, status flag resides in
CPU memory registered so it's visible from the GPU.
To facilitate the interaction with the status flag, this patch
provides also the set/get functions for it.
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
Update rte_gpu_mem_cpu_unmap() header documentation
and the test application to use GPU pointer when unmapping.
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
Rather than the asym session create function returning a session on
success, and a NULL value on error, it is modified to now return int
values - 0 on success or -EINVAL/-ENOTSUP/-ENOMEM on failure.
The session to be used is passed as input.
This adds clarity on the failure of the create function, which enables
treating the -ENOTSUP return as TEST_SKIPPED in test apps.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
A user data field is added to the asymmetric session structure.
Relevant API added to get/set the field.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The rte_cryptodev_asym_session structure is now moved to an internal
header. This will no longer be used directly by apps,
private session data can be accessed via get API.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Rather than using a session buffer that contains pointers to private
session data elsewhere, have a single session buffer.
This session is created for a driver ID, and the mempool element
contains space for the max session private data needed for any driver.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The programmer's guide for cryptodev included sample code for using
Asymmetric crypto. This is now replaced with direct code from the test
application, using literal includes. It is broken into snippets as the
test application didn't have all of the required code in one function.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Fix out of place scatter gather list in sym raw datapath unit test.
Fixes: cd8166c28c ("test/crypto: add raw API test for dpaax")
Cc: stable@dpdk.org
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add gre_option command for matching optional fields
(checksum/key/sequence) in GRE header. The item must follow gre item,
and the item does not change the flags in gre item, the application
should set the flags in gre item correspondingly.
Application can still use gre_key item 'gre_key value is xx' for key
matching, the effect is the same with using 'gre_option key is xx'.
The examples for gre_option are as follows:
To match on checksum field with value 0x11:
testpmd> ... pattern / eth / gre c_bit is 1 / gre_option checksum is
0x11 / end ..
To match on checksum field with value 0x11 and any value of key:
testpmd> ... pattern / eth / gre c_bit is 1 k_bit is 1 / gre_option
checksum is 0x11 / end ..
To match on checksum field with value 0x11 and no key field in packet:
testpmd> ... pattern / eth / gre c_bit is 1 k_bit is 0 / gre_option
checksum is 0x11 / end ..
The invalid patterns for gre_option are as follows:
testpmd> ... pattern / eth / gre / gre_option checksum is 0x11 / end ..
(c_bit in gre item not present)
testpmd> ... pattern / eth / gre c_bit is 0 / gre_option checksum is 0x11 /
end .. (c_bit is unset for gre item, but checksum is
specified by gre_option item)
Signed-off-by: Sean Zhang <xiazhang@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
This patch adds L2TPv2 control message and 5 types of data message
support for testpmd.
The added L2TPv2 message types are listed below:
1. L2TPv2 control
2. L2TPv2
3. L2TPv2 + length option
4. L2TPv2 + sequence option
5. L2TPv2 + offset option
6. L2TPv2 + length option + sequence option
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Acked-by: Ori Kam <orika@nvidia.com>
This patch defines new RSS offload type for L2TPv2, which
is required when users want to distribute packets based on
the L2TPv2 session ID field.
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Functions like free, rte_free, and rte_mempool_free
already handle NULL pointer so the checks here are not necessary.
Remove redundant NULL pointer checks before free functions
found by nullfree.cocci
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When allocating a mbuf, its data content is most of the time zero'd but
nothing ensures this. This is especially wrong when building with
RTE_MALLOC_DEBUG, where data is poisoned to 0x6b on free.
This test reserves MBUF_TEST_DATA_LEN2 bytes in the mbuf data segment,
and sets this data to 0xcc.
Calling strlen(), the test may try to read more than MBUF_TEST_DATA_LEN2
which has been noticed when memory had been poisoned.
The mbuf data content is checked right after, so we can simply remove
strlen().
Fixes: 7b295dceea ("test/mbuf: add unit test cases")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This patch fixes the division by 0, which occurs if the number of
routes is less than 10.
Can be triggered by passing -n argument with value < 10:
./dpdk-test-fib -- -n 9
...
Floating point exception (core dumped)
Fixes: 103809d032 ("app/test-fib: add test application for FIB")
Cc: stable@dpdk.org
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Enable the possibility to expose a GPU memory area and make it
accessible from the CPU.
GPU memory has to be allocated via rte_gpu_mem_alloc().
This patch allows the gpudev library to map (and unmap),
through the GPU driver, a chunk of GPU memory and to return
a memory pointer usable by the CPU to access the GPU memory area.
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
Patch adds command line options to configure queue based
priority flow control.
- Syntax command is given as below:
set pfc_queue_ctrl <port_id> rx <on|off> <tx_qid> <tx_tc> \
tx <on|off> <rx_qid> <rx_tc> <pause_time>
- Example command to configure queue based priority flow control
on rx and tx side for port 0, Rx queue 0, Tx queue 0 with pause
time 2047
testpmd> set pfc_queue_ctrl 0 rx on 0 0 tx on 0 0 2047
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Csum forwarding mode only supports software UDP/TCP csum calculation
for single segment packets when hardware offload is not enabled.
This patch enables software UDP/TCP csum calculation over multiple
segments.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Tested-by: Sunil Pai G <sunil.pai.g@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch enables method to provide key and mask for raw rules
to be provided as hexadecimal values. There is new parameter
pattern_mask added to support this.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
When the size of EEPROM exceeds the default thread stack size(8MB),
e.g.: 10MB size, it will crash due to stack overflow.
Allocate the data of EPPROM information on the heap.
Fixes: 6b67721dee ("app/testpmd: add EEPROM command")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Aman Singh <aman.deep.singh@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
when start testpmd, and type command like this, it will lead to
Segmentation fault, like:
testpmd> create bonded device 4 0
testpmd> add bonding slave 0 2
testpmd> add bonding slave 1 2
testpmd> port start 2
testpmd> set bonding mode 0 2
testpmd> quit
Stopping port 0...
Stopping ports...
...
Bye...
Segmentation fault
The reason to the bug is that rte timer do not be cancelled when quit.
That is, in 'bond_ethdev_start', resources are allocated according to
different bonding mode. In 'bond_ethdev_stop', resources are free by
the corresponding mode.
For example, 'bond_ethdev_start' start bond_mode_8023ad_ext_periodic_cb
timer for bonding mode 4. and 'bond_ethdev_stop' cancel the timer only
when the current bonding mode is 4. If the bonding mode is changed,
and directly quit the process, the timer will still on, and freed memory
will be accessed, then segmentation fault.
'bonding mode' changed means resources changed, reallocate resources for
different mode should be done, that is, device should be restarted.
Fixes: 2950a76931 ("bond: testpmd support")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Expose Linux EAL ability to reuse existing hugepage files
via --huge-unlink=never switch.
Default behavior is unchanged, it can also be specified
using --huge-unlink=existing for consistency.
Old --huge-unlink switch is kept,
it is an alias for --huge-unlink=always.
Add a test case for the --huge-unlink=never mode.
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Memory allocator performance is crucial to applications that deal
with large amount of memory or allocate frequently. DPDK allocator
performance is affected by EAL options, API used and, at least,
allocation size. New autotest is intended to be run with different
EAL options. It measures performance with a range of sizes
for dirrerent APIs: rte_malloc, rte_zmalloc, and rte_memzone_reserve.
Work distribution between allocation and deallocation depends on EAL
options. The test prints both times and total time to ease comparison.
Memory can be filled with zeroes at different points of allocation path,
but it always takes considerable fraction of overall timing. This is why
the test measures filling speed and prints how long clearing takes
for each size as a reference (for rte_memzone_reserve estimations
are printed).
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Reviewed-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Enable a subset of unit tests for Windows CI
- For driver tests, driver owners should enable corresponding tests when
enabling driver for Windows.
- For dump tests, currently the tests hang on Windows which require
further investigation.
- For telemetry tests, it has POSIX socket specific codes which require
replacement for Windows. Will investigate and work on a separate patch.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
- Add python script to check if system supports hugepages
- Remove corresponding .sh script
- Replace calling of .sh with corresponding .py in meson.build
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Skip tests which are not yet supported for Windows:
- The libraries that tests depend on are not enabled on Windows yet
- The tests can compile but with issue still under investigation
* test_func_reentrancy:
Windows EAL has no protection against repeated calls.
* test_lcores:
Execution enters an infinite loops, requires investigation.
* test_rcu_qsbr_perf:
Execution hangs on Windows, requires investigation.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Add prefix to resolve name collision on Windows.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Remove two alarm_autotest test cases which do bogus range check
on Windows.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
On Windows, strerror returns just "Unknown error" for errnum greater
than MAX_ERRNO, while linux and freebsd returns "Unknown error <num>",
which is the current expectation for errno_autotest. Differentiate
the error string on Windows to remove a "duplicate error code" failure.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
DPDK logs_autotest on Windows failed at "dynamic log types" tests.
The failures are on 2 test cases for rte_log_set_level_regexp API,
due to regular expression is not supported on Windows in DPDK yet
and regcomp/regexec are just stubs on Windows (in regex.h).
In app/test/test_logs.c, ifndef these two test cases, and for the
rte_log_set_level_pattern validation case following these two cases,
differentiate the expected log level passed into macro CHECK_LEVELS
Now logs_autotest completes for all dynamic log types and static log types.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Even though test_interrupts.c can compile on Windows, skip interrupt
tests for now since majority of eal_interrupt on Windows are stubs.
Will remove the skip after interrupt being fully enabled on Windows.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
- Replace POSIX-specific code with DPDK equivalents or
conditionally disable it on Windows
- Use NUL on Windows as /dev/null for Unix
- Exclude tests not supported on Windows yet
* multi-process
* PMD performance statistics display on signal
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
"What gets measured gets done."
This patch adds mempool performance tests where the number of objects to
put and get is constant at compile time, which may significantly improve
the performance of these functions. [*]
Also, it is ensured that the array holding the object used for testing
is cache line aligned, for maximum performance.
And finally, the following entries are added to the list of tests:
- Number of kept objects: 512
- Number of objects to get and to put: The number of pointers fitting
into a cache line, i.e. 8 or 16
[*] Some example performance test (with cache) results:
get_bulk=4 put_bulk=4 keep=128 constant_n=false rate_persec=280480972
get_bulk=4 put_bulk=4 keep=128 constant_n=true rate_persec=622159462
get_bulk=8 put_bulk=8 keep=128 constant_n=false rate_persec=477967155
get_bulk=8 put_bulk=8 keep=128 constant_n=true rate_persec=917582643
get_bulk=32 put_bulk=32 keep=32 constant_n=false rate_persec=871248691
get_bulk=32 put_bulk=32 keep=32 constant_n=true rate_persec=1134021836
Signed-off-by: Morten Brørup <mb@smartsharesystems.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Meson 0.61.1 is giving warnings that the calls to run_command do not
always explicitly specify if the result is to be checked or not, i.e.
there is a missing "check" parameter. This is because the default
behaviour without the parameter is due to change in the future.
We can fix these warnings by explicitly adding into each call whether
the result should be checked by meson or not. This patch therefore
adds in "check: false" to each run_command call where the result is
being checked by the DPDK meson.build code afterwards, and adds in
"check: true" to any calls where the result is currently unchecked.
Bugzilla ID: 921
Cc: stable@dpdk.org
Reported-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
External pinned buffer memory (--mp-alloc=xbuf)
was allocated as multiple IOVA-contiguous memzones
of 2M size and 2M alignment.
Due to the malloc overhead and the alignment requirement,
each 2M memzone consumed 4M of hugepage memory:
2M of usable memory + X of malloc overhead + (2M-X) padding.
The allocation often failed with 2M hugepages and IOVA-as-PA
if a PA-contiguous span of 2 hugepages could not be found.
Also, with any hugepage size and IOVA mode
memory consumption was almost 2x of the usable amount.
Alignment requirement of 2M for external buffers is redundant.
It was an attempt to ensure IOVA-contiguity
by forcing memzones to start at hugepage boundaries,
while 2M size intended to leave no unused space on the page.
As shown above, this in fact caused excessive memory consumption
and decreased the chance of a successful allocation.
RTE_MEMZONE_F_IOVA_CONTIG already ensures IOVA-contiguity.
Remove the alignment requirement.
Reduce the memzone size by the malloc overhead size (4 cache lines),
so that memory consumption for each memzone is
(2M-X) of usable memory + X of malloc overhead = 2M.
This also means that whenever there are free 2M hugepages,
an IOVA-contiguous memzone can always be allocated.
Fixes: 72512e1897 ("app/testpmd: add mempool with external data buffers")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Assign 'left' variable only after null check on 'size'
as function returns if 'size' is null.
Coverity issue: 374381
Fixes: 169a9fed1f ("app/testpmd: fix hex string parser support for flow API")
Cc: stable@dpdk.org
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The first "set txtimes" command parameter specifies the time
interval between scheduled send bursts for single queue. This
interval should be the same for all the forwarding ports.
It requires to maintain the timing related variables on per
queue basis instead of per core, as currently implemented.
This resulted in wrong burst intervals if two or more cores
were generating the scheduled traffic for two or more ports
in txonly mode.
This patch moves the timing variable to the fstream structure.
Only txonly forwarding mode with enabled send scheduling is
affected.
Fixes: 4940344dab ("app/testpmd: add Tx scheduling command")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add test cases to verify copy DF and set DF options
with lookaside IPsec offload.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add known vector test cases for NULL cipher + AES-XCBC.
Also add both algos to the combined mode list of algos.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Skipping NULL authentication in ICV corruption test case
for lookaside IPsec testsuite.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add fragmented plain packet test case in combined mode.
The test case leverages combined mode framework to generate
IPsec packet from a fragment and verify that headers are formed
correctly. The IPsec packet would be decapsulated and the plain
packet is compared against the original packet.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add IPsec AES-CTR test case for combined mode
in lookaside IPsec testsuite.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Added IPsec transport mode test cases for IPv4 packets
in the test app.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Added fragmented plain packet known vector test case in
IPsec outbound. The test case sends a fragmented packet
and ensures that the IPsec packet generated has correct
fragmentation fields (ie, the IPsec packet is not fragmented)
by comparing against the known vector.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Test app is updated with lookaside IPsec HMAC-SHA384/512
known vectors test cases.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Added IPv6 known vector and combined mode tests.
Following modes are added:
Tunnel IPv6 in IPv6
Tunnel IPv4 in IPv4
Tunnel IPv4 in IPv6
Tunnel IPv6 in IPv4
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Test app for lookaside IPsec is added with
AES-CBC-HMAC-SHA256 test cases.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Extend IPsec lookaside test framework to support chained
operations and add AES-CBC 128 known vector tests.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add port, table and pipeline libraries - collectively often known as
the "packet framework" - to the list of optional libraries, and
ensure tests can build with them disabled.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Add the flow_classify library to the list of optional libraries, and
ensure tests can build with it disabled.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Rather than maintaining a list of the libraries the unit tests need, and
having to conditionally include/omit optional libs from the list, we can
just link against all available libraries, simplifying the code
considerably.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Similarly to rte_malloc, rte_gpu_mem_alloc accepts as
input the memory alignment size.
GPU driver should return GPU memory address aligned
with the input value.
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
To ensure we catch any bugs in calculation due to wrap-around of the id
values, increase the number of iterations of the burst_capacity test.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Kevin Laatz <kevin.laatz@intel.com>
As per the deprecation notice, In the view of enabling unified driver
for octeontx2(cn9k)/octeontx3(cn10k), removing drivers/octeontx2
drivers and replace with drivers/cnxk/ which
supports both octeontx2(cn9k) and octeontx3(cn10k) SoCs.
This patch does the following
- Replace drivers/common/octeontx2/ with drivers/common/cnxk/
- Replace drivers/mempool/octeontx2/ with drivers/mempool/cnxk/
- Replace drivers/net/octeontx2/ with drivers/net/cnxk/
- Replace drivers/event/octeontx2/ with drivers/event/cnxk/
- Replace drivers/crypto/octeontx2/ with drivers/crypto/cnxk/
- Rename config/arm/arm64_octeontx2_linux_gcc as
config/arm/arm64_cn9k_linux_gcc
- Update the documentation and MAINTAINERS to reflect the same.
- Change the reference to OCTEONTX2 as OCTEON 9. Old release notes and
the kernel related documentation is not accounted for this change.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Ruifeng Wang <ruifeng.wang@arm.com>
Remove all memory leaks in case of errors in
test-gpudev application.
Fixes: e818c4e2bf ("gpudev: add memory API")
Fixes: c7ebd65c13 ("gpudev: add communication list")
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
