The rte_kernel_driver enum actually only pointed at PCI drivers and is
only used in the PCI subsystem.
Remove it from the generic device API and use a private enum in the PCI
code.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Start a new release cycle with empty release notes.
The ABI version becomes 21.0.
The ABI major is back to normal, having only one number (21 vs 20.0).
The map files are updated to the new ABI major number (21).
The ABI exceptions are dropped.
Travis ABI check is disabled because compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Prior to this fix the NFP PMD implementation of the .rss_hash_conf_get
callback did not propagate the current hardware state of rss_hf back up
to the caller. Users of the hash_conf_get callback would receive an
incorrect representation of what the RSS configuration currently is in
hardware.
Fixes: 934e4c60fb ("nfp: add RSS")
Cc: stable@dpdk.org
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Currently, there is a potential problem that calling the API function
rte_eth_dev_set_vlan_offload to start VLAN hardware offloads which the
driver does not support. If the PMD driver does not support certain VLAN
hardware offloads and does not check for it, the hardware setting will
not change, but the VLAN offloads in dev->data->dev_conf.rxmode.offloads
will be turned on.
It is supposed to check the hardware capabilities to decide whether the
relative callback needs to be called just like the behavior in the API
function named rte_eth_dev_configure. And it is also needed to cleanup
duplicated checks which are done in some PMDs. Also, note that it is
behaviour change for some PMDs which simply ignore (with error/warning
log message) unsupported VLAN offloads, but now it will fail.
Fixes: a4996bd89c ("ethdev: new Rx/Tx offloads API")
Fixes: 0ebce6129b ("net/dpaa2: support new ethdev offload APIs")
Fixes: f9416bbafd ("net/enic: remove VLAN filter handler")
Fixes: 4f7d9e383e ("fm10k: update vlan offload features")
Fixes: fdba3bf15c ("net/hinic: add VLAN filter and offload")
Fixes: b96fb2f0d2 ("net/i40e: handle QinQ strip")
Fixes: d4a27a3b09 ("nfp: add basic features")
Fixes: 56139e85ab ("net/octeontx: support VLAN filter offload")
Fixes: ba1b3b081e ("net/octeontx2: support VLAN offloads")
Fixes: d87246a437 ("net/qede: enable and disable VLAN filtering")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
When nfp_pf_create_dev() is cleaning up, it does not correctly set
the dev_private variable to NULL, which will lead to a double free.
Fixes: ef28aa96e5 ("net/nfp: support multiprocess")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
Changing format specifier for the 'size_t' as '%z' and for 'off_t' as
'%jd'.
Also this fix enables compiling PMD for 32bit architecture.
Fixes: 29a62d1476 ("net/nfp: add CPP bridge as service")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
There is a common macro __rte_packed for packing structs,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There is a common macro __rte_aligned for alignment,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and
meson.build. Instead, enable ALLOW_EXPERIMENTAL_API flag across app, lib
and drivers.
This changes reduces the clutter across the project while still
maintaining the functionality of ALLOW_EXPERIMENTAL_API i.e. warning
external applications about experimental API usage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Use PCI_PRI_FMT instead of "%04d:%02d:%02d:%d" print format.
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
Merge all versions in linker version script files to DPDK_20.0.
This commit was generated by running the following command:
:~/DPDK$ buildtools/update-abi.sh 20.0
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since the library versioning for both stable and experimental ABI's is
now managed globally, the LIBABIVER and version variables no longer
serve any useful purpose, and can be removed.
The replacement in Makefiles was done using the following regex:
^(#.*\n)?LIBABIVER\s*:=\s*\d+\n(\s*\n)?
(LIBABIVER := numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
The replacement for meson files was done using the following regex:
^(#.*\n)?version\s*=\s*\d+\n(\s*\n)?
(version = numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
[David]: those variables are manually removed for the files:
- drivers/common/qat/Makefile
- lib/librte_eal/meson.build
[David]: the LIBABIVER is restored for the external ethtool example
library.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
By default RSS hash delivery (offload) is bound to RSS mode and
it is incorrect to advertise it as enabled if Rx multi-queue mode
has no RSS.
Fixes: 8b945a7f7d ("drivers/net: update Rx RSS hash offload capabilities")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add DEV_RX_OFFLOAD_RSS_HASH flag for all PMDs that support RSS hash
delivery.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Change return value of the callbacks from void to int. Make
implementations across all drivers return negative errno
values in case of error conditions.
Both callbacks are updated together because a large number of
drivers assign the same function to both callbacks.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enabling/disabling of promiscuous mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change eth_dev_infos_get_t return value from void to int.
Make eth_dev_infos_get_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Replace rte_intr_enable() with rte_intr_ack() API
for acking an interrupt in interrupt handlers and
rx_queue_intr_enable() callbacks of PMD's.
This is inline with original intent of this change in PMDs
to ack interrupts after handling is completed if
device is backed by UIO, IGB_UIO or VFIO(with INTx).
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Shahed Shaikh <shshaikh@marvell.com>
Tested-by: Shahed Shaikh <shshaikh@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
The incriminated commit broke the use of RTE_PCI_DRV_IOVA_AS_VA which
was intended to mean "driver only supports VA" but had been understood
as "driver supports both PA and VA" by most net drivers and used to let
dpdk processes to run as non root (which do not have access to physical
addresses on recent kernels).
The check on physical addresses actually closed the gap for those
drivers. We don't need to mark them with RTE_PCI_DRV_IOVA_AS_VA and this
flag can retain its intended meaning.
Document explicitly its meaning.
We can check that a driver requirement wrt to IOVA mode is fulfilled
before trying to probe a device.
Finally, document the heuristic used to select the IOVA mode and hope
that we won't break it again.
Fixes: 703458e19c ("bus/pci: consider only usable devices for IOVA mode")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
For each driver where we optionally disable it, add in the reason why it's
being disabled, so the user knows how to fix it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
From comment in the build config for the make build-system:
"NFP PMD is not supported on 32-bit"
Therefore disable NFP for 32-bit meson builds as well as for 32-bit
make ones.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Define variables for "is_linux", "is_freebsd" and "is_windows"
to make the code shorter for comparisons and more readable.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Call to CPP read (nfp_cpp_readl()) can fail, return 0 on fail.
If the call to _nfp6000_cppat_mu_locality fails, the function needs
to return with an error.
If the nfp_cpp_readl() call fails just returns 0.
Coverity issue: 277209, 277215, 277225
Fixes: c7e9729da6 ("net/nfp: support CPP")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Although it is rather unlikely getting 0 as the descriptor handle, better
to contemplate that possibility.
Coverity issue: 195018
Fixes: 896c265ef9 ("net/nfp: use new CPP interface")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Add functions to set the link state up or down.
Signed-off-by: Pablo Cascón <pablo.cascon@netronome.com>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Fixes following build error on systems without execinfo.h:
drivers/net/nfp/nfpcore/nfp_cpp_pcie_ops.c:19:10: fatal error:
execinfo.h: No such file or directory
#include <execinfo.h>
^~~~~~~~~~~~
Fixes: c7e9729da6 ("net/nfp: support CPP")
Cc: stable@dpdk.org
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
sprintf function is not secure as it doesn't check the length of string.
More secure function snprintf is used.
Fixes: 896c265ef9 ("net/nfp: use new CPP interface")
Fixes: c4171b520b ("net/nfp: support PF multiport")
Cc: stable@dpdk.org
Signed-off-by: Pallantla Poornima <pallantlax.poornima@intel.com>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Tested-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Current code is not properly giving the RSS information
regarding the redirection table.
Fixes: 934e4c60fb ("nfp: add RSS")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Some firmwares, mostly for VFs, do not advertise the feature /
capability of changing the MAC address while the interface is up. With
such firmware a request to change the MAC address that at the same
time also tries to enable the not available feature will be denied by
the firmware resulting in an error message like:
nfp_net_reconfig(): Error nfp_net reconfig for ctrl: 80000000 update: 800
Fix set_mac_addr by not trying to enable a feature if it is not
advertised by the firmware.
Fixes: 2fe669f4bc ("net/nfp: support MAC address change")
Cc: stable@dpdk.org
Signed-off-by: Pablo Cascón <pablo.cascon@netronome.com>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Shifting signed 32-bit values by 31-bits has the potential for
unexpected outcomes as compiler can overwrite a bit.
Specified that values are unsigned.
Errors are observed from running cppcheck.
Bugzilla ID: 58
Fixes: 69e209be54 ("net/axgbe: add register map and related macros")
Fixes: b5bf771922 ("bnx2x: driver support routines")
Fixes: ed2ced6fe9 ("net/bnxt: check initialization before accessing stats")
Fixes: 6fda3f0ddd ("net/cxgbe: add API to program hardware MPS table")
Fixes: bdb244b969 ("e1000: whitespace changes")
Fixes: 5a32a257f9 ("e1000: more NICs in base driver")
Fixes: 2fe669f4bc ("net/nfp: support MAC address change")
Fixes: defb9a5dd1 ("nfp: introduce driver initialization")
Fixes: ec94dbc573 ("qede: add base driver")
Fixes: d2e7d931d0 ("net/qede/base: formatting changes")
Fixes: cdc07e83bb ("net/tap: add eBPF program file")
Cc: stable@dpdk.org
Signed-off-by: Andrius Sirvys <andrius.sirvys@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The Netronome's Network Flow Processor chip is highly programmable
with the goal of processing packets at high speed. Processing units
and other chip components are available from the host through the
PCIe CPP(Command Push Pull bus) interface. The NFP PF PMD configures
a CPP handler for setting up and working with vNICs, perform actions
like link up or down, or accessing extended stats from the MAC component.
There exist NFP host tools which access the NFP components for
programming and debugging but they require the CPP interface. When the
PMD is bound to the PF, the DPDK app owns the CPP interface, so these
host tools can not access the NFP through other means like NFP kernel
drivers.
This patch adds a CPP bridge using the rte_service API which can be
enabled by a DPDK app. Interestingly, DPDK clients like OVS will not
enable specific service cores, but this can be performed with a
secondary process specifically enabling this CPP bridge service and
therefore giving access to the NFP to those host tools.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Previous commit adding multiprocess support broke VF support.
When VFs, the PMD does not set the link up or down.
Fixes: ef28aa96e5 ("net/nfp: support multiprocess")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
This patch introduces changes for supporting multiprocess support.
This is trivial for VFs but comes with some limitations for the PF.
Due to restrictions when using NFP CPP interface, just one secondary
process is supported by now for the PF.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Current name rte_eal_check_dma_mask does not follow the naming
used in the rest of the file.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
NFP can handle IOVA as VA. It requires to check those IOVAs
being in the supported range what is done during initialization.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
NFP devices can not handle DMA addresses requiring more than
40 bits. This patch uses rte_dev_check_dma_mask with 40 bits
and avoids device initialization if memory out of NFP range.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Disabled nfp build in FreeBSD because it is not supported
Added changes to enable NFP build if it is Linux OS and
disable in FreeBSD.
Fixes: d9b9ca7e05 ("net/nfp: add to meson build")
Cc: stable@dpdk.org
Signed-off-by: Agalya Babu RadhaKrishnan <agalyax.babu.radhakrishnan@intel.com>
Three problems are fixed in this patch:
- RSS capabilities not advertised properly
- RSS configuration just done for some RSS types
- RSS hash match reported for just some RSS types
Fixes: 934e4c60fb ("nfp: add RSS")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
