Even though nonexistent cnxk_gpio is unlikely at this point
it's a good practice to check pointers before using them.
Fixes: 0e6557b448 ("raw/cnxk_gpio: add self test")
Coverity issue: 376502
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
All used resources need to be properly cleaned up in error path.
Fixes: 0e6557b448 ("raw/cnxk_gpio: add self test")
Coverity issue: 376504
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add PMD parameter that allows one to select only subset of available
GPIOs.
This might be useful in cases where some GPIOs are already reserved yet
still available for userspace access but particular app should not touch
them.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for custom interrupt handlers. Custom interrupt
handlers bypass kernel completely and are meant for fast
and low latency access to GPIO state.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Add initial support for PMD that allows to control particular pins form
userspace. Moreover PMD allows to attach custom interrupt handlers to
controllable GPIOs.
Main users of this PMD are dataplain applications requiring fast and low
latency access to pin state.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Before registering the doorbell interrupt handler callback function,
all the valid doorbell bits within the NTB private data struct should
be cleared to avoid the confusion of the handshake timing sequence
diagram when setting up the NTB connection in back-to-back mode.
Fixes: 62012a7681 ("raw/ntb: add handshake process")
Cc: stable@dpdk.org
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Functions like free, rte_free, and rte_mempool_free
already handle NULL pointer so the checks here are not necessary.
Remove redundant NULL pointer checks before free functions
found by nullfree.cocci
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Fix ID value of port features to match the definition from hardware.
Fixes: 473c88f9b3 ("drivers/raw: remove rawdev from directory names")
Cc: stable@dpdk.org
Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
When we want to close a thread, we should set a flag to notify
thread handler function.
Fixes: 9c006c45d0 ("raw/ifpga: scan PCIe BDF device tree")
Cc: stable@dpdk.org
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
When EOP is detected, 2 more bytes should be received
(may be a SPI_PACKET_ESC before last valid byte) then
rx should be finished.
Fixes: 96ebfcf812 ("raw/ifpga/base: add SPI and MAX10 device driver")
Cc: stable@dpdk.org
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Some drivers currently have their own checks and give some non
consistent reasons when an internal dependency is unavailable.
drivers/meson.build also checks for internal dependencies via 'deps'.
Let's rely on it for consistency, and smaller code.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Long Li <longli@microsoft.com>
Removing the use of driver following PMD as its unnecessary.
Cc: stable@dpdk.org
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Signed-off-by: Conor Fogarty <conor.fogarty@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Generally it is good practice to include all headers that provide APIs
which are being used. This is especially true in situations where 3rd
party apps include our public headers and assume that all should work
out of the box.
Including all headers explicitly helps to achieve that.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Device naming might be misleading which is especially true if one takes
it from lspci output. In order to keep naming consistent keep leading
zero in front of pci bus number.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jakub Palider <jpalider@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch resolves problem with internal header
inclusion. In addition prevents C++ name mangling.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Tomasz Duszynski <tduszynski@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Removing direct access to interrupt handle structure fields,
rather use respective get set APIs for the same.
Making changes to all the drivers access the interrupt handle fields.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Move the example script for configuring IDXD devices bound to the IDXD
kernel driver from raw to dma, and create a symlink to still allow use from
raw.
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Only build the rawdev IDXD/IOAT drivers if the dmadev drivers are not
present.
This change requires the dependencies to be reordered in
drivers/meson.build so that rawdev can use the "RTE_DMA_* build macros to
check for the presence of the equivalent dmadev driver.
A note is also added to the documentation to inform users of this change.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Maximum interrupt number function used direct access to
structure field while ROC helper exists and serves the
same purpose.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
One sends commands and receive responses by enqueuing or dequeuing
custom messages. In order to simplify this scheme simple wrappers
were added which take care of all the heavy lifting.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Removing the rawdev based octeontx2-ep driver as the dependent
common/octeontx2 will soon be going away. Moreover this driver is no
longer required as the net/octeontx_ep driver is sufficient.
Signed-off-by: Radha Mohan Chintakuntla <radhac@marvell.com>
Removing the rawdev based octeontx2-dma driver as the dependent
common/octeontx2 will be soon be going away. Also a new DMA driver will
be coming in this place once the rte_dmadev library is in.
Signed-off-by: Radha Mohan Chintakuntla <radhac@marvell.com>
There is no need for preventional check of rte_lcore_id() in
data path. This patch removes the same.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
RAW configure and Queue setup APIs support size parameter for
configure. This patch supports the same for DPAA2 QDMA PMD APIs
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Finding with "librt" keyword would give the output with
full path of librt such as
/usr/lib/gcc/x86_64-linux-gnu/7/../../../x86_64-linux-gnu/librt.so
instead of -lrt in libdpdk.pc pkg-config file.
Assume find_library() will prepend "lib", thus remove
"lib" from "librt" keyword. The output will shows
as -lrt.
This will cause an issue when compile DPDK app with
static library as the path of librt has been hard-coded
in the libdpdk.pc file.
Fixes: e41856b515 ("raw/ifpga/base: enhance driver reliability in multi-process")
Cc: stable@dpdk.org
Signed-off-by: Mohamad Noor Alim Hussin <mohamad.noor.alim.hussin@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add support for reading NPA/SSO pf_func which will be used
by a PSM to access NPA/SSO. PSM is a hardware block capable
of dispatching jobs to different blocks within a baseband
module.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Name needs to be prepared before the lookup otherwise
PMD will not be released.
Fixes: 24d9c5d59d ("raw/cnxk_bphy: add baseband PHY skeleton driver")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Queue counter is used in a few places so it was given some
reasonable name.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
There is an inconsistency in naming interrupt control
functions. This patch aligns names accordingly.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
One should only use roc_api.h which exports all internal headers.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Currently there are some public headers that include 'sys/queue.h', which
is not POSIX, but usually provided by the Linux/BSD system library.
(Not in POSIX.1, POSIX.1-2001, or POSIX.1-2008. Present on the BSDs.)
The file is missing on Windows. During the Windows build, DPDK uses a
bundled copy, so building a DPDK library works fine. But when OVS or other
applications use DPDK as a library, because some DPDK public headers
include 'sys/queue.h', on Windows, it triggers an error due to no such
file.
One solution is to install the 'lib/eal/windows/include/sys/queue.h' into
Windows environment, such as [1]. However, this means DPDK exports the
functionalities of 'sys/queue.h' into the environment, which might cause
symbols, macros, headers clashing with other applications.
The patch fixes it by removing the "#include <sys/queue.h>" from
DPDK public headers, so programs including DPDK headers don't depend
on the system to provide 'sys/queue.h'. When these public headers use
macros such as TAILQ_xxx, we replace it by the ones with RTE_ prefix.
For Windows, we copy the definitions from <sys/queue.h> to rte_os.h
in Windows EAL. Note that these RTE_ macros are compatible with
<sys/queue.h>, both at the level of API (to use with <sys/queue.h>
macros in C files) and ABI (to avoid breaking it).
Additionally, the TAILQ_FOREACH_SAFE is not part of <sys/queue.h>,
the patch replaces it with RTE_TAILQ_FOREACH_SAFE.
[1] http://mails.dpdk.org/archives/dev/2021-August/216304.html
Suggested-by: Nick Connolly <nick.connolly@mayadata.io>
Suggested-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Narcisa Vasile <navasile@linux.microsoft.com>
Since meson 0.59.0 version, the extract_all_objects() API
need to pass explicit boolean value.
To remove the following warning[1], added explicit `true` for
extract_all_objects() use in codebase whever there is
no argument.
[1]
WARNING: extract_all_objects called without setting recursive
keyword argument. Meson currently defaults to
non-recursive to maintain backward compatibility but
the default will be changed in the future.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Start a new release cycle with empty release notes.
The ABI version becomes 22.0.
The map files are updated to the new ABI major number (22).
The ABI exceptions are dropped and CI ABI checks are disabled because
compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
When batch_size == 1, idxd has to add a dummy termination descriptor
to satisfy HW requirements.
Right now it uses NOP descriptor with FENCE flag.
This is excessive and fencing can slowdown things quite significantly.
The patch removes FENCE flag from termination dummy descriptor.
That helps to improve performance for no-burst scenarios.
Fixes: 245efe544d ("raw/ioat: report status of completed jobs")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The queue size calculation is currently based on "max_tokens" rather than
"max_work_queues_size". This is resulting in the queue size being
incorrectly configured when using the script to configure devices bound to
the IDXD kernel driver.
This patch fixes this miscalculation so devices are configured with
appropriate queue size.
Fixes: 01863b9d23 ("raw/ioat: include example configuration script")
Cc: stable@dpdk.org
Reported-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add support for performing selftest.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Custom IRQ handlers may be registered/removed on demand.
Since registration and removal are related they are in the
same patch.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
