Add up to 9s delay for getting link status to make sure NIC updates
link status successfully, just like other applications such as
testpmd and l2fwd.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
Coverity issue: 257008
Fixes: cc7e8ae84f ("examples/bond: add example application for link bonding mode 6")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Current code only sets mac address of first VF. Fix code so that it
continues through the loop and sets the mac address of each VF.
Fixes: c9a4779135 ("examples/vm_power_mgr: set MAC address of VF")
Cc: stable@dpdk.org
Signed-off-by: David Coyle <david.coyle@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
This patch adds following:
1. Option to configure the mac address during create. Generate random
address only if the user has not provided any valid address.
2. Inform usespace, if mac address is being changed in linux.
3. Implement default handling of mac address change in the corresponding
ethernet device.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fixes: 73db5bad ("net: align ethdev and eal driver names")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Increase the default RX/TX ring sizes to 1024/1024 to
accommodate for NICs with higher throughput (25G, 40G etc)
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Added a check on rte_bbdev_stats_get() return before
printing out the statistics results.
Coverity issue: 257018
Fixes: 1ffee690ea ("examples/bbdev: add sample app")
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
xstats and xstats_names buffers were allocated for
the purpose of printing eth_xstats, but were not
freed before exit.
A fix is added to free before exit points.
Coverity issue: 257013
Fixes: 1ffee690ea ("examples/bbdev: add sample app")
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
eth_address was improperly accessed in bbdev example
app, this patch removes the use of port_id, it is
irrelevant here.
Coverity issue: 257021
Fixes: 1ffee690ea ("examples/bbdev: add sample app")
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
Added support for detecting march and mcpu by reading midr_el1 register.
The implementer, primary part number values read can be used to figure
out the underlying arm cpu.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Any flags added to the project args are automatically added to all builds,
both native and cross-compiled. This is not what we want for the -march
flag as a valid -march for the cross-compile is not valid for pmdinfogen
which is a native-build tool.
Instead we store the march flag as a variable, and add it to the default
cflags for all libs, drivers, examples, etc. This will allow pmdinfogen to
compile successfully in a cross-compilation environment.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Since the DPDK build now includes both static and shared libraries, we need
a new way to enable building the examples using either method from the one
installation. To do this, we add in a default "shared" target, and a
separate "static" target which links in the DPDK static libraries. In both
cases, the final application name is symlinked to the last-built static or
shared target, with both binaries able to co-exist in the build directory.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
This patch changes the build process to group all .o files for a driver or
library into a static archive first, and then link the .o files together
into a shared library. This eliminates the need for separate static or
shared object builds when packaging, for instance.
The "default_library" configuration option now only affects the apps and
examples, which are either linked against the static or shared library
versions depending on the value of the option.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Change the example app Makefiles to query if DPDK is installed and
registered using pkg-config. If so, build directly using pkg-config info,
otherwise fall back to using the original build system with RTE_SDK and
RTE_TARGET
This commit changes the makefiles for the basic examples, i.e. those which
do not have multiple subdirectories underneath the main examples dir.
Examples not covered are:
* ethtool
* multi_process
* performance-thread
* quota_watermark
* netmap_compat
* server_node_efd
* vm_power_manager
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
Reorder the text in the makefiles, so that the app name and the source
files are listed first. This then will allow them to be shared later in a
combined makefile building with pkg-config and RTE_SDK-based build system.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
Add support for having selected example apps built as part of a meson,
ninja build. By default none are built, and those to be built should be
named directly in the -Dexamples='' meson configuration argument.
This is useful for developers working on a feature who want to use a
suitable example, or examples, to test that feature, as they can compile
everything up in one go, and run the example without having to do a ninja
install first.
This commit adds examples which don't consist of multiple apps in
subdirectories to the meson build, so they can be built by default by
passing -Dexamples parameter to meson.
Not included are the following examples:
* ethtool
* multi-process
* netmap_compat
* performance-thread
* quota_watermark
* server_node_efd
* vm_power_manager
To test the apps added here, use the following command, merged to one line,
to add them to your meson build (command to be run inside the build
directory):
meson configure -Dexamples=bbdev_app,bond,cmdline,distributor,\
eventdev_pipeline_sw_pmd, exception_path,helloworld,\
ip_fragmentation,ip_pipeline,ip_reassembly, ipsec-secgw,\
ipv4_multicast,kni,l2fwd-cat,l2fwd-crypto,l2fwd-jobstats,\
l2fwd-keepalive,l2fwd,l3fwd-acl,l3fwd-power,l3fwd-vf,l3fwd,\
link_status_interrupt,load_balancer,packet_ordering,ptpclient,\
qos_meter,qos_sched,rxtx_callbacks,skeleton,tep_termination,\
timer,vhost,vhost_scsi,vmdq,vmdq_dcb
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
Ethdev port id has been extended 16bits from 8bits in DPDK 17.11 release,
the patch fixes mismatch use.
Fixes: 4a3ef59a10 ("examples/flow_filtering: add simple demo of flow API")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fixes: 3da37f6821 ("examples/ipsec_secgw: create session mempools for ethdevs")
Some NICs do not have the rte_security context, this patch fixes the segment fault
caused by this.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Add checks during build to ensure that all symbols in the EXPERIMENTAL
version map section have __experimental tags on their definitions, and
enable the warnings needed to announce their use. Also add an
ALLOW_EXPERIMENTAL_APIS define to allow individual libraries and files
to declare the acceptability of experimental api usage
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Some errors were seen with GCC 4.8 and 4.9.
It looks to be a bug fixed in GCC 5.
examples/eventdev_pipeline/pipeline_worker_generic.c:474:4: error:
missing initializer for field 'queue_id' of 'struct <anonymous>'
examples/eventdev_pipeline/pipeline_worker_generic.c:475:3: error:
missing initializer for field 'priority' of 'struct <anonymous>'
examples/eventdev_pipeline/pipeline_worker_tx.c:630:2: error:
missing initializer for field 'queue_id' of 'struct <anonymous>'
The workaround is to not use initializer statement,
but to use memset and standard assignment.
Fixes: 84dde5de10 ("examples/eventdev: support Rx adapter")
Fixes: fa8054c8c8 ("examples/eventdev: add thread safe Tx worker pipeline")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
After trying RSS and Queue also try End for flow action
to allow for HW that don't support flow features with
inline crypto.
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Reviewed-by: Akhil Goyal <akhil.goyal@nxp.com>
SPI field is defined in the RFC2406 [1] as a big endian field it should be
provided in its final form to the drivers through RTE flow.
[1] https://tools.ietf.org/html/rfc2406
Fixes: ec17993a14 ("examples/ipsec-secgw: support security offload")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Mellanox INNOVA NIC needs to have final target queue actions to perform
inline crypto.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Generic flow API have both direction bits, ingress and egress for rules
which may work on both sides.
Fixes: ec17993a14 ("examples/ipsec-secgw: support security offload")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
IPSec application is using index 0 of SA table as error,
with current value of IPSEC_SA_MAX_ENTRIES(128) it can
not support SA with spi = 128, as it uses sa_idx = 0
in the SA table.
With this patch, sa_idx = 0 can also be used.
PS: spi = 0 is an invalid SPI and application throws error
for it.
Fixes: d299106e8e ("examples/ipsec-secgw: add IPsec sample application")
Cc: stable@dpdk.org
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Since the processing of crypto operations may take time
due to hardware offload, all the packets may not be available
in the single dequeue command.
So it may happen that there is leakage of cops, and there is
nobody to dequeue the packets because dequeue of crypto ops is
done only once for a particular queue pair even if it has more
packets in flight.
This patch dequeue the packets again if the inflight packets are
more than the max packet burst.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
When TTL is decremented or ecn is updated in IP header
before forwarding the packet, checksum needs to be updated.
In this patch an incremental checksum is added for ipv4 case.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Packet_type should be updated to remove/add L4 type for
encrypted/decrypted packet
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Previously, ipsec-secgw application did not give user the
flexibility to decide which crypto device(s) will be used.
In this patch, a new cryptodev_mask option is added to the
application. Same as portmask, the cryptodev_mask avails the
user to mask out the unwanted crypto devices in the system.
This patch is similar to the support added in l2fwd-crypto
(d2797f51cc: examples/l2fwd-crypto: add cryptodev mask option)
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Adding support for inline protocol processing
In ingress side, application will receive regular IP packets, without
any IPsec related info. Application will do a selector check (SP-SA
check) by making use of the metadata from the packet. The
device-specific metadata in mbuf would aid in determing the security
session which processed the packet.
In egress side, the plain packet would be submitted to the driver. The
packet will have optional metadata, which could be used to identify the
security session associated with the packet.
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Reviewed-by: Akhil Goyal <akhil.goyal@nxp.com>
When security offload is enabled, the packet should be forwarded on the
port configured in the SA. Security session will be configured on that
port only, and sending the packet on other ports could result in
unencrypted packets being sent out.
This would have performance improvements too, as the per packet LPM
lookup would be avoided for IPsec packets, in inline mode.
Fixes: ec17993a14 ("examples/ipsec-secgw: support security offload")
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Rename eventdev_pipeline_sw_pmd to eventdev_pipeline as it is no longer
specific underlying event device.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add option to configure the mempool size at run time instead of
hardcoding it to 16384 * num_ports.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add optimized eventdev pipeline when ethdev supports thread safe Tx,
number of configured stages is one and all type queue option is enabled.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add optimized eventdev pipeline when ethdev supports thread safe Tx
and number of configured stages is one.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Added configurable option to make queue type as all type queues i.e.
RTE_EVENT_QUEUE_CFG_ALL_TYPES based on event dev capability
RTE_EVENT_DEV_CAP_QUEUE_ALL_TYPES.
This can be enabled by supplying '-a' as a cmdline argument.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add burst mode worker pipeline when Tx is multi thread safe.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add worker pipeline when Tx is multi thread safe.
Probe Ethernet dev capabilities and select it it is supported.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The current work cycles function exchanges source and destination mac
address and also pauses the core for the given cycles.
This patch splits the function into two parts i.e. exchange mac and
pause the cores. The pause cores function is invoked at every stage
where as exchange mac is invoked when packet is transmitted.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Currently, worker uses burst dequeue and burst enqueue to forward events.
Add a non burst mode based on the event dev capabilities.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Each eventdev pipeline needs to allow different cmdline args combination
based on pipeline type.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add framework to support capability based pipeline.
Based on the capability of event device and probed ethernet devices the
optimal pipeline configuration can be chosen.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Move common structures and functions into pipeline_common.h so that they
can be used by different kinds of pipelines.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Use event Rx adapter for packets Rx instead of explicit producer logic.
Use service run iter function for granular control instead of using
dedicated service lcore.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit introduces a capability for disabling the "implicit" release
functionality for a port, which prevents the eventdev PMD from issuing
outstanding releases for previously dequeued events when dequeuing a new
batch of events.
If a PMD does not support this capability, the application will receive an
error if it attempts to setup a port with implicit releases disabled.
Otherwise, if the port is configured with implicit releases disabled, the
application must release each dequeued event by invoking
rte_event_enqueue_burst() with RTE_EVENT_OP_RELEASE or
RTE_EVENT_OP_FORWARD.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
