To read line side statistics register, eth_group_sel
args in function ipn3ke_indirect_mac_read should be 0.
When eth_group_sel is 1, the nic side register is read.
Fixes: 5a6d883878 ("net/ipn3ke: implement statistics")
Cc: stable@dpdk.org
Signed-off-by: Andy Pei <andy.pei@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
The ipn3ke driver and the ifpga driver had circular dependencies on each
other, meaning that neither could be built with meson. Fix this by:
* setting the build order of net and raw to match that in makefiles
* removing the dependency from the net driver on the rawdev one
* fixing the dependency names in the rawdev driver meson.build file
Fixes: 8418c92811 ("net/ipn3ke: remove configuration for i40e port bonding")
Fixes: e1defba4cf ("raw/ifpga/base: support device tree")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Merge all versions in linker version script files to DPDK_20.0.
This commit was generated by running the following command:
:~/DPDK$ buildtools/update-abi.sh 20.0
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since the library versioning for both stable and experimental ABI's is
now managed globally, the LIBABIVER and version variables no longer
serve any useful purpose, and can be removed.
The replacement in Makefiles was done using the following regex:
^(#.*\n)?LIBABIVER\s*:=\s*\d+\n(\s*\n)?
(LIBABIVER := numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
The replacement for meson files was done using the following regex:
^(#.*\n)?version\s*=\s*\d+\n(\s*\n)?
(version = numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
[David]: those variables are manually removed for the files:
- drivers/common/qat/Makefile
- lib/librte_eal/meson.build
[David]: the LIBABIVER is restored for the external ethtool example
library.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The ipn3ke board FPGA and i40e BDF scan has added in ifpga_rawdev,
so it doesn't need to provide configuration for i40e port bonding.
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
In PAC N3000 card, this is a BMC chip which using MAX10 FPGA
to manage the board configuration, like sensors, flash controller,
QSFP, powers. And this is a SPI bus connected between A10 FPGA and
MAX10, we can access the MAX10 registers over this SPI bus.
In BMC, there are about 19 sensors in MAX10 chip, including the FPGA
core temperature, Board temperature, board current, voltage and so on.
We use DTB (Device tree table) to describe it. This DTB file is store
in nor flash partition, which will flashed in Factory when the boards
delivery to customers. And the same time, the customers can easy to
customize the BMC configuration like change the sensors.
Add device tree support by using libfdt library in Linux distribution.
The end-user should pre-install the libfdt and libfdt-devel package
before use DPDK on PAC N3000 Card.
For Centos 7.x: sudo yum install libfdt libfdt-devel
For Ubuntu 18.04: sudo apt install libfdt-dev libfdt1
To eliminate build error, we currently do not compile raw/ifpga
and net/ipn3ke. User should install libfdt and libfdt-devel first,
modify config/common_linux, CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=n
to CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y, modify config/common_base,
CONFIG_RTE_LIBRTE_IPN3KE_PMD=n to CONFIG_RTE_LIBRTE_IPN3KE_PMD=y.
Then this function can work.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
These struct members and variable were commented out. Remove them.
Fixes: c01c748e4a ("net/ipn3ke: add new driver")
Fixes: c820468ac9 ("net/ipn3ke: support TM")
Cc: stable@dpdk.org
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Coverity complains that this statement is not needed as the goto
label is on the next line anyway. Remove the if statement.
653 ret = ipn3ke_cfg_parse_i40e_pf_ethdev(afu_name, pf_name);
CID 337930 (#1 of 1): Identical code for different branches
(IDENTICAL_BRANCHES)identical_branches: The same code is executed
when the condition ret is true or false, because the code in the
if-then branch and after the if statement is identical. Should
the if statement be removed?
654 if (ret)
655 goto end;
implicit_else: The code from the above if-then branch is identical
to the code after the if statement.
656end:
Coverity issue: 337930
Fixes: c01c748e4a ("net/ipn3ke: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Coverity is complaining about identical code regardless of which branch
of the if else is taken. Functionally it means an error will always be
returned if this if else is hit. Remove the else branch.
CID 337928 (#1 of 1): Identical code for different branches
(IDENTICAL_BRANCHES)identical_branches: The same code is executed
regardless of whether n->level != IPN3KE_TM_NODE_LEVEL_COS ||
n->n_children != 0U is true, because the 'then' and 'else' branches
are identical. Should one of the branches be modified, or the entire
'if' statement replaced?
1506 if (n->level != IPN3KE_TM_NODE_LEVEL_COS ||
1507 n->n_children != 0) {
1508 return -rte_tm_error_set(error,
1509 EINVAL,
1510 RTE_TM_ERROR_TYPE_UNSPECIFIED,
1511 NULL,
1512 rte_strerror(EINVAL));
else_branch: The else branch, identical to the then branch.
1513 } else {
1514 return -rte_tm_error_set(error,
1515 EINVAL,
1516 RTE_TM_ERROR_TYPE_UNSPECIFIED,
1517 NULL,
1518 rte_strerror(EINVAL));
1519 }
Coverity issue: 337928
Fixes: c820468ac9 ("net/ipn3ke: support TM")
Cc: stable@dpdk.org
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Set up MTU to the minimum among Tx MTU, Rx MTU and
IPN3KE_MAC_FRAME_SIZE_MAX.
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Enabling/disabling of allmulticast mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change return value of the callbacks from void to int. Make
implementations across all drivers return negative errno
values in case of error conditions.
Both callbacks are updated together because a large number of
drivers assign the same function to both callbacks.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enabling/disabling of promiscuous mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change eth_dev_infos_get_t return value from void to int.
Make eth_dev_infos_get_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
There should not be blank lines at end of files.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch implements statistics read and reset function for ipn3ke.
Signed-off-by: Andy Pei <andy.pei@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
ipn3ke can work on 10G mode and 25G mode.
10G mode and 25G mode has different MAC register address for statistics.
This patch implements statistics registers for 10G mode and 25G mode.
Also implements different stats clearing per mode.
Fixes: c01c748e4a ("net/ipn3ke: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Andy Pei <andy.pei@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Original code is compatible with older device, whose mac register
address is no more than 10 bits. Now we have mac register address
longer than 10 bits, so we just delete the mask here.
Fixes: c01c748e4a ("net/ipn3ke: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Andy Pei <andy.pei@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Modify AFU configurations for new BBS (Blue Bitstream) of A10 on N3000
card:
- AFU register access: RTL changes the UPL (User Programmable Logic
which is the container of vBNG IP) base address and the read/write
commands of register indirect access.
- Poll the INIT_STS register to wait for the vBNG IP and DDR reset
completion.
- Refine log for debug: print UPL_version not only for vBNG bit stream,
but also for other bit streams.
Fixes: c01c748e4a ("net/ipn3ke: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Dan Wei <dan.wei@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
In 'ipn3ke_hw_tm_node_wr()', elements of 'n->parent_node' are accessed
but 'n->parent_node' can be NULL.
After applying this patch, this null pointer dereference is avoided.
Coverity issue: 337921
Fixes: c820468ac9 ("net/ipn3ke: support TM")
Cc: stable@dpdk.org
Signed-off-by: Andy Pei <andy.pei@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Check input argument "rte_eth_dev *ethdev", to be sure variable is not
NULL before operating on it.
Coverity issue: 337922
Fixes: 70d6b7f550 ("net/ipn3ke: add representor")
Cc: stable@dpdk.org
Signed-off-by: Andy Pei <andy.pei@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Whether the if statement is true or not, the operation is identical.
It is unnecessary to check the if statement, so just delete the if
statement.
Coverity issue: 337928
Fixes: c820468ac9 ("net/ipn3ke: support TM")
Cc: stable@dpdk.org
Signed-off-by: Andy Pei <andy.pei@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
