Currently when creating meter policy, a src port_id match item will
always be added in switch domain. So if one meter is used by another
port, it will not work correctly.
This issue is solved:
1. If policy fate action is port_id, add the src port_id match item,
and the meter cannot be shared by another port.
2. If policy fate action isn't port_id, don't add the src port_id
match, meter can be shared by another port.
This fix enables one meter being shared by different ports. User can
create a meter flow using a port_id match item to make this meter
shared by other port.
Fixes: afb4aa4f122 ("net/mlx5: support meter policy operations")
Cc: stable@dpdk.org
Signed-off-by: Shun Hao <shunh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
ConnectX-4 and ConnectX-4 Lx NICs require all L2 headers of transmitted
packets to be inlined. By default only first 18 bytes are inlined,
which is insufficient if additional encapsulation is used, like Q-in-Q.
Thus, default settings caused such traffic to be dropepd on Tx.
Document a recommendation to increase inlined data size in such cases.
Fixes: 505f1fe426d3 ("net/mlx5: add Tx devargs")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Reviewed-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
WINOF2 2.70 Windows kernel driver allows DevX rule creation
of types TCP and IPv6.
Added the types to the supported items in mlx5_flow_os_item_supported
to allow them to be created in the PMD.
Added description of new rules support in Windows kernel driver WINOF2 2.70
to the mlx5 driver guide.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add support to fetch the SFP EEPROM settings from the firmware.
For SFP+ modules we will display 0xA0 page for status and 0xA2 page
for other information. For QSFP modules we will show the 0xA0 page.
Also identify the module types for QSFP28, QSFP, QSFP+ apart
from the SFP modules and return an error for 10GBase-T PHY.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
1. Add templates to support Thor platform.
2. Flow counter manager is not enabled if no flow counters are
configured.
3. Mark database is not enabled if mark action is not supported.
4. Removed application to port default flow.
5. Add allocate and write for the global registry file.
6. Multiple default flow templates are combined to one.
7. Remove default loopback action record, this is required in order to
support multiple platforms.
8. Enable port table support in the generic table.
9. remove global template table in order to support multiple platforms.
10. Add support to get parent VNIC from port table database.
11. VF representor action mark is made optional since not all
configurations need representor support.
12. Add layer 4 ports to computational fields.
13. Update templates to support the above changes.
14. Add support for wildcard.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Conflict resolution feature allows rejection of flows based on
the previously added flows that conflict. For instance, a five
tuple flow is added and then you add a new flow with only 4 tuple
instead having same layer2 details then it will be rejected.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Currently, a devarg (host-based-truflow) is passed while launching
the app to enable TRUFLOW feature. However, this mechanism adds
an extra step in enabling TRUFLOW. This doesn't give a seamless
experience when flow offloads has to work with FW that doesn't/does
support TRUFLOW feature. Also, it's likely that customers may not
want to use devarg to enable flow offloads.
This patch fixes it by checking for TRUFLOW feature support in
device's capabilities and configurations field of the hwrm_ver_get.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Add link status event pre-conditions in the driver documentation.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Chelsio T6 ASIC doesn't track Rx promisc traffic dropped due to lack
of Rx buffers and hence the imissed counter doesn't increment. Add
support for RAW MAC filter to insert a wildcard matchall rule at
the end of MPS TCAM to make MPS track the promisc traffic. This
rule will only be added/removed when promisc mode is turned on/off
on the interface.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Actions VXLAN_DECAP and VXLAN_ENCAP need to be listed
among actions supported for transfer flows.
Fixes: 6ab6c40d1e83 ("net/sfc: support action VXLAN decap in transfer rules")
Fixes: 1bbd1ec2348a ("net/sfc: support action VXLAN encap in MAE backend")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
The HW debug mask is always zero, so user can't enable the related debug
function like ICE_DBG_XXX etc, add the devarg 'hw_debug_mask' to set the
debug mask log output at runtime.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Patch adds multicast filter support for cn9k and cn10k platforms.
CGX DMAC filter table(32 entries) is divided among all LMACs
connected to it i.e. if CGX has 4 LMACs then each LMAC can have
up to 8 filters. If CGX has 1 LMAC then it can have up to 32
filters.
Above mentioned filter table is used to install unicast and multicast
DMAC address filters. Unicast filters are installed via
rte_eth_dev_mac_addr_add API while multicast filters are installed
via rte_eth_dev_set_mc_addr_list API.
So in total, supported MAC filters are equal to DMAC filters plus
mcast filters.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Adding initial version of rte_flow support for cnxk family device.
Supported rte_flow ops are flow_validate, flow_create, flow_destroy,
flow_flush, flow_query, flow_isolate.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Application may choose to enable/disable interrupts on Rx queues
so that application can select its processing if no packets are
available on queues for a longer period.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Add device start and stop operation callbacks for
CN9K and CN10K. Device stop is common for both platforms
while device start as some platform dependent portion where
the platform specific offload flags are recomputed and
the right Rx/Tx burst function is chosen.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add support for packet type lookup on Rx to translate HW
specific types to RTE_PTYPE_* defines
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
aDD tx queue setup and release for CN9K and CN10K.
Release is common while setup is platform dependent due
to differences in fast path Tx queue structures.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add Rx queue setup and release op for CN9K and CN10K
SoC. Release is completely common while setup is platform
dependent due to fast path Rx queue structure variation.
Fastpath is platform dependent partly due to core cacheline
size difference.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add device configuration op for CN9K and CN10K. Most of the
device configuration is common between two platforms except for
some supported offloads.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add various devargs parsing command line arguments
parsing functions supported by CN9K and CN10K.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add build infrastructure and common probe and remove for cnxk driver
which is used by both CN10K and CN9K SoC.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
The tool lstopo from hwloc package can provide a graphical
or textual view.
In its textual form, the option --merge gives a shorter summary
which fits well with the DPDK need.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The support of the new RTE_FLOW_ITEM_TYPE_INTEGRITY
was added in the release notes 21.02 by mistake.
The support of the Sub-Function representors was missing
in the release notes and the mlx5 guide.
Fixes: 79f8952783d0 ("net/mlx5: support integrity flow item")
Fixes: cb95feefdd03 ("net/mlx5: support sub-function representor")
Signed-off-by: Asaf Penso <asafp@nvidia.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The NICs overview table lists all supported features per driver.
There was a single row for "Flow API",
although rte_flow is composed of many items and actions.
The row "Flow API" is replaced with two new tables for items and actions.
Also, since rte_flow is not implemented in all drivers,
it would be ugly to add empty sections in some files.
That's why the error message for missing INI section is removed.
The lists are sorted alphabetically.
The extra files for some VF and vectorized data paths are not filled.
Signed-off-by: Asaf Penso <asafp@nvidia.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Kiran Kumar K <kirankumark@marvell.com>
---
v6 changes:
- rebase/update
- remove deprecated shared action
The driver directory is drivers/net/sfc
but the features file was doc/guides/nics/features/sfc_efx.ini.
sfc_efx.ini is renamed sfc.ini to match the driver directory name.
It will help automatic checks of this file.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The admin-configured vNIC settings (i.e. via CIMC or UCSM) now include
Geneve offload. Use that setting to decide whether to enable or
disable Geneve offload and remove the devarg 'geneve-opt'.
Also, the firmware now allows the driver to change the Geneve port
number. So extend udp_tunnel_port_{add,del} to accept Geneve port, in
addition to VXLAN.
Fixes: 93fb21fdbe23 ("net/enic: enable overlay offload for VXLAN and GENEVE")
Cc: stable@dpdk.org
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
