According to spec, we should write virtqueue index into the notify
address, rather than 1. Besides, some HW backend may rely on the data
written to identify which queue need to serve.
Fixes: 6ba1f63b5a ("virtio: support specification 1.0")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
With the Enhanced multi packet send addition, the defaults were made
in order to get the maximum out of the box performance.
Features like tso, don't use the enhanced send, however the defaults
are still valid. This cause Tx queue creation to fail.
Fixes: 3f13f8c23a ("net/mlx5: support hardware TSO")
Fixes: 6ce84bd889 ("net/mlx5: add enhanced multi-packet send for ConnectX-5")
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Currently the argument process is done without indication which
parameter was forced by the application and which one is on it
default value.
This becomes problematic when different features requires different
defaults. For example, Enhanced multi packet send and TSO.
This commit modifies the argument process, enabling to differ
which parameter was forced by the application.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Add case to handle 25G link speed and thereby support
LiquidIO II CN23XX 225SV (2x25G) adapter.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Add check to avoid invalid VF queue number is used in
tunnel filter.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
RSS hash is computed by hardware if corresponding Rx filter (for
example, default Rx filters) has RSS flag set which is set if
the number of RSS channels is greater than zero.
Fixes: 4ec1fc3ba8 ("net/sfc: add basic stubs for RSS support on driver attach")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Enabled RSS enables RSS hash computation and provision in pseudo header.
It still makes sense for applications even if only one Rx queue is used.
Fixes: 4ec1fc3ba8 ("net/sfc: add basic stubs for RSS support on driver attach")
Fixes: 088e17210a ("net/sfc: query RSS key and hash types config")
Fixes: 82faef5076 ("net/sfc: set RSS key and hash types config")
Fixes: af0d931797 ("net/sfc: query RSS redirection table")
Fixes: 32bcfb0a50 ("net/sfc: update RSS redirection table")
Fixes: f5258439ee ("net/sfc: avoid failure on port start if Rx mode is rejected")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Fixes: 4ec1fc3ba8 ("net/sfc: add basic stubs for RSS support on driver attach")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Coverity issue: 1419717
Fixes: a9825ccf5b ("net/sfc: support flow API filters")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Current implementation is error-prone if the max inline size
(txq->max_inilne) is decoupled from txq->inline_en and becomes zero. If it
becomes zero, HW can crash due to WQ overflow.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
When deleting the default MAC VLAN filter, it's
expected that it may fail.
So downgrade the error print from warning to
debug.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Change level of log message from ERR to DEBUG and reword it,
in the i40e_dev_consistent_tunnel_filter_set() function.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
In rx vector mode, QinQ is not supported.
When hw_vlan_extend is set for QinQ ensure that
rx vector mode is not selected.
Fixes: 8e109464c0 ("i40e: allow vector Rx and Tx usage")
Cc: stable@dpdk.org
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
With the mbuf rework, we now have 8 contiguous bytes to be
rearmed in the mbuf at 8B naturally aligned address.
Use single 8B write to avoid multiple 2B writes in Rx path.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
When receiving the unsupported AQ messages, it's taken as
an error. It's not appropriate and triggers too much
unnecessary print.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Fixes issue where mlx4 driver stops receiving packets when mbuf
allocation fails in mlx4_rx_burst().
This issue appears to be caused because the code doesn't recycle the
existing mbuf to the sges array when mbuf allocation fails as is done
in the code right above it which handles (wc.status != IBV_WC_SUCCESS).
Copying the code from the above case fixes the issue.
Fixes: acac55f164 ("mlx4: use MOFED 3.0 fast verbs interface for Rx operations")
Cc: stable@dpdk.org
Signed-off-by: Charles Myers <charles.myers@spirent.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Currently, 'rte_eth_dev_configure' fails on attempt to setup
max_rx_pkt_len > 2048 if no slaves was added to bonded device.
For example:
rte_eth_dev_attach("eth_bond0,slave=05:00.0,mode=l34", &id)
conf.rxmode.jumbo_frame = 1;
conf.rxmode.max_rx_pkt_len = 9000;
rte_eth_dev_configure(id, 1, 1, &conf)
Result:
EAL: Initializing pmd_bond for eth_bond0
EAL: Create bonded device eth_bond0 on port 4 in mode 2 on socket 0.
rte_eth_dev_configure: ethdev port_id=4 \
max_rx_pkt_len 9018 > max valid value 2048
It's expected that slaves will be added to bonded device inside
'rte_eth_dev_configure' and proper 'max_rx_pktlen' configured
for all of them.
Failure happens because of hardcoded low value of 'max_rx_pktlen'.
Increasing of this value to ETHER_MAX_JUMBO_FRAME_LEN will allow
above scenario (attach + configure).
It is important because it is the way OVS wants to work with
all DPDK devices (including virtual).
Changing the default hardcoded value makes no harm because
all the slaves' related code uses only 'candidate_max_rx_pktlen'
variable.
Fixes: 6cfc6a4f0d ("net/bonding: inherit maximum Rx packet length")
CC: stable@dpdk.org
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Eric Kinzie <ehkinzie@gmail.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Some applications like OVS knows nothing about the
device type and wants to use same API to work with
all of them. But bond_pmd, unlike other pmds, requires
additional step (removing of all the slaves) before
closing the device.
In fact that bond_pmd automatically adds all the
devices from kvargs to bonding on configuration it
also should remove all of them on close.
This change is intended to have the same API for physical
and virtual devices. It allows us to handle virtual
devices in OVS in a common way.
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
DPDK community has several emails discussion on this topic,
these mails link is bellow:
http://dpdk.org/ml/archives/dev/2017-March/060379.html,
http://dpdk.org/ml/archives/dev/2017-March/060295.html,
items like VLAN can already have several valid "types"
(0x88a8, 0x8100, 0x9100), and who knows what will come up
in the future.
And ixgbe_flow just ignores the types when do filter configuration.
So it may be reasonable to delete the related tpid check process.
Also add some more comment log on stack explanation.
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Since the queue release API does not allow failures (return value is void)
and the flow API does not allow a queue to be released as long as a flow
rule depends on it, the only rational decision to avoid undefined behavior
is to panic in this situation.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Flow queues array offset is not properly computed causing all sorts of
issues. Address it by making the rte_flow structure less complex.
Fixes: 360663e1df ("net/mlx5: prepare support for RSS action rule")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
VF link status rely on PF's notification, so when PF link status
be updated, it should notify VF to update link status also.
Current implementation only cover part of the situation when PF's link
status is updated, call i40e_notify_all_vfs_link_status in
i4e_dev_link_update will cover all situationa.
Fixes: bb6722fb5c ("net/i40e: fix VF bonded device link down")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
The patch adds 4 APIs to support configurable
PTYPE mapping for i40e device.
rte_pmd_i40e_ptype_mapping_get.
rte_pmd_i40e_ptype_mapping_replace.
rte_pmd_i40e_ptype_mapping_reset.
rte_pmd_i40e_ptype_mapping_update.
The mapping from hardware defined packet type to software defined packet
type can be updated/reset/read out with these APIs.
Also a software ptype with the most significent bit set will be regarded
as a user defined ptype (RTE_PMD_I40E_PTYPE_USER_DEFINE_MASK) so
application can use it to defined its own PTYPE naming system.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
The mapping from hardware defined packet type to software defined
packet type is static for i40e device, the patch let each ethdev to
to have their own copy of mapping table, this give the possibility
that different ethdev can be set different PTYPE mapping rule which
is the requirement to support following hardware's dynamic PTYPE
feature.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Fix generic filter return info is not readable
when repeat to create a rule.
Fixes: 72c135a89f ("net/ixgbe: create consistent filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
According to HW implementation, the bandwidth of QoS
means the L2 bandwidth, not count the bytes added by
physical layer.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
As the hardware determines which core will process which packet,
performance is boosted by direct cache warming/stashing as well
as by providing biasing for core-to-flow affinity, which ensures
that flow-specific data structures can remain in the core’s cache.
This patch enables the one cache line data stashing for packet
annotation data and packet context
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch add support for dpni object support in MC driver.
DPNI represent a network interface object in DPAA2.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
DPAA2 Hardware Mempool handlers allow enqueue/dequeue from NXP's
QBMAN hardware block.
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS is set to 'dpaa2', if the pool
is enabled.
This memory pool currently supports packet mbuf type blocks only.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch adds generic functions for allowing dq storage
for the frame queues.
As the frame queues are common resource for different drivers
this is helpful.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Before DPAA2 devices can communicate using hardware queues, this patch
adds queue definitions in the FSLMC bus which the DPAA2 devices would
instantiate.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The portal driver is bound to DPIO objects discovered on the fsl-mc bus and
provides services that:
- allow other drivers, such as the Ethernet driver, to enqueue and dequeue
frames for their respective objects
A system will typically allocate 1 DPIO object per CPU to allow queuing
operations to happen simultaneously across all CPUs.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch will add support in fslmc vfio process to
scan and parse the dpni and dpseci object for net and crypto
devices. It will add the scanned devices to the fslmc bus.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Add support for using VFIO for dpaa2 based fsl-mc bus.
There are some differences in the way vfio used for fsl-mc bus
from the eal vfio.
- The scanning of bus for individual objects on the basis of
the DPRC container.
- The use and mapping of MC portal for object access
With the evolution of bus model, they can be further aligned with
eal vfio code.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
DPBP object represent a hw based buffer pool instance
in the DPAA2 hardware.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch adds the DPIO object support in MC driver.
DPIO - Data Path Input Output represent the processing
context to access the QBMAN HW for packet I/O.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch introduces the DPAA2 MC(Management complex Driver).
This is a minimal set of low level functions to send and
receive commands to the fsl-mc. It includes support for basic
management commands and commands to manipulate MC objects.
This is common to be used by various DPAA2 PMDs. e.g.net, crypto
and other drivers.
This is a low level library also used in kernel.
Signed-off-by: Cristian Sovaiala <cristian.sovaiala@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
QBMAN, is a hardware block which interfaces with the other
accelerating hardware blocks (For e.g., WRIOP) on NXP's DPAA2
SoC for queue, buffer and packet scheduling.
This patch introduces a userspace driver for interfacing with
the QBMAN hw block.
The qbman-portal component provides APIs to do the low level
hardware bit twiddling for operations such as:
-initializing Qman software portals
-building and sending portal commands
-portal interrupt configuration and processing
This same/similar code is used in kernel and compat file is used
to make it working in user space.
Signed-off-by: Geoff Thorpe <geoff.thorpe@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
When TSO is disabled we still have to calculate partial checksum if DF bit
if turned off. This is caused by firmware bug.
First of all, we must make sure that we are dealing with IPV4 packet.
If not, we will just skip further checking of this packet and move to
the next one.
If application will not set m2_len field, we assume we that it was Ethernet
frame because we have to look inside the packet to check for the DF flag.
To make it work properly, PMD is assuming that before sending
packet application called function rte_eth_tx_prepare().
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Jakub Palider <jpalider@gmail.com>
Acked-by: Jan Medala <jan.medala@outlook.com>
If wrong number of descriptors for refilling was passed to the Rx
repopulate function, there was memory leak which caused memory pool to
run out of resources in longer go.
In case of fail when refilling Rx descriptors, all additional mbufs
have to be released.
Fixes: 1173fca25a ("ena: add polling-mode driver")
Cc: stable@dpdk.org
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Jakub Palider <jpalider@gmail.com>
Acked-by: Jan Medala <jan.medala@outlook.com>
On RX path, after receiving bunch of packets, variable tracking
available descriptors in HW queue was not updated.
To fix this issue, variable tracking used descriptors must be updated
after receiving packets - it must be reduced by the amount of received
descriptors in current batch.
Additionally, variable next_to_clean in rx_ring must be updated before
entering ena_populate_rx_queue() to keep it up to date with the current
ring state.
Fixes: 1daff5260f ("net/ena: use unmasked head and tail")
Cc: stable@dpdk.org
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Jakub Palider <jpalider@gmail.com>
Acked-by: Jan Medala <jan.medala@outlook.com>
When application tried to allocate 1024 descriptors, device was not
initializing properly.
This patch solves it by avoiding allocation of all descriptors in the
ring in one attempt. At least one descriptor must remain unused in the
HW ring.
Fixes: 1173fca25a ("ena: add polling-mode driver")
Cc: stable@dpdk.org
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Jakub Palider <jpalider@gmail.com>
Acked-by: Jan Medala <jan.medala@outlook.com>
Expose additional fpga status registers.
Report hardware status during PMD init.
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Acked-by: John Miller <john.miller@atomicrules.com>
Time stamp was carried in the packet meta data, but not
place in the mbuf. The new time stamp field is the proper
destination.
Remove the setting of data offset since this is done by
rte_pktmbuf_free()
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Acked-by: John Miller <john.miller@atomicrules.com>
Removing this check improves performance as VLAN and CRC stripping are
enabled most of the time.
Convert MLX5_CQE_VLAN_STRIPPED to network order to speed up the check
instead of doing it on the completion queue entry field.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Trying to assign more queues to stats struct break only from one loop
when the maximum size is reached. Outside loop iteration is continued.
This leads to access an array out of bounds.
Fixes: 21e3fb0050 ("net/thunderx: add final bits for secondary queue support")
Cc: stable@dpdk.org
Signed-off-by: Marcin Wilk <marcin.wilk@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Create a new file rte_pmd_ixgbe.c for all the private
APIs. Move all the related code to the new file.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
To keep consistent with previous release, Priority Flow Control (PFC)
need to be disabled by default. This patch fixes it.
This also fixes an issue where traffic was not forwarded by testpmd
occasionally. In those cases ~4770 pps seen on one of the ports rather
than the full rate (>20mpps).
Fixes: 6f0a707e5b ("net/i40e: enable DCB on SRIOV VFs")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
There are some new PCTYPEs on X722, but they have not been announced
on the RTE lib, so if it can not set corresponding hash input set for
these packet type, the hash function won’t work.
So we need to handle them base on the translation of the new
PCTYPE and the original PCTYPE.
Fixes: b6a0ec4182 ("i40e: use AQ for Rx control register read/write")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Remove initialization of next and nb_segs mbuf fields in the Rx path
since they are now initialized in the mbuf pool.
See commit 8f094a9ac5 ("mbuf: set mbuf fields while in pool").
Signed-off-by: John Daley <johndale@cisco.com>
The base code was using native GCC macros
for endian detection. Change to portable
rte_byteorder.h based endian detection.
Fixes: 262d43fe20 ("net/thunderx/base: add HW register definitions")
Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Having packets received without any offload flags given in the mbuf is not
very useful, and performance tests with testpmd indicates little
benefit is got with the current code by turning off the flags. This makes
the build-time option pointless, so we can remove it.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
With the mbuf rework, we now have 8 contiguous bytes to be rearmed in the
mbuf just before the 8-bytes of olflags. If we don't do the rearm write
inside the descriptor ring replenishment function, and delay it to
receiving the packet, we can do a single 16B write inside the RX function
to set both the rearm data, and the flags together.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Porting two changes from x86 SSE implematation.
net/i40e: fix checksum flag in x86 vector Rx
net/i40e: eliminate mbuf write on rearm
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Having packets received without any offload flags given in the mbuf is not
very useful, and performance tests with testpmd indicates little to no
benefit is got with the current code by turning off the flags. This makes
the build-time option pointless, so we can remove it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
With the mbuf rework, we now have 8 contiguous bytes to be rearmed in the
mbuf just before the 8-bytes of olflags. If we don't do the rearm write
inside the descriptor ring replenishment function, and delay it to
receiving the packet, we can do a single 16B write inside the RX function
to set both the rearm data, and the flags together.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
Initialize mail box command to request VF FLR. Data field was
uninitialized before as it was not required and caused the following
error during scan.
Coverity issue: 1384518
Fixes: cdb166963c ("net/liquidio: add API for VF FLR")
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
When PF notify link speed to VF, encode of link speed need to
be converted from ETH_SPEED_XXX to I40E_LINK_SPEED_XXX.
Fixes: bb6722fb5c ("net/i40e: fix VF bonded device link down")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Make i40e_notify_all_vfs_link_status as a wrapper of
i40e_notify_vf_link_status so duplicate code can be removed.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
The eth keyword only should be accepted.
Fixes: d37705068e ("net/i40e: parse QinQ pattern")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
mbuf next is equal to NULL, nb_segs and reference counter are equal to 1
when mbuf is obtained from mempool.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
* Core TX packet moving functions
* Flesh out ark_adapter struct to support TX code
(not all fields used at this patch)
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Provide C-level interface for Arkville's internal HW resources
DDM (Downstream Data Mover) and UDM (Upstream Data Mover) modules
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
