RTE_MBUF_INDIRECT() is replaced with RTE_MBUF_CLONED() and removed.
This macro was deprecated in release 18.05 when EXT_ATTACHED_MBUF was
introduced.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
tso and vlan parameters were removed from the signature
of txq_mbuf_to_swp function.
The documentation of the function was not updated accordingly.
Remove the tso and vlan documentation to match the function signature.
Fixes: 8f6d9e13a98c ("net/mlx5: remove redundant checks")
Cc: stable@dpdk.org
Signed-off-by: Asaf Penso <asafp@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Unnecessary volatile attribute keeps compiler from further optimizing the
code and this results in a little performance drop (~2%). Because of memory
barriers, it is safe to remove.
Fixes: 6bf10ab69be0 ("net/mlx5: support 32-bit systems")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
There's some performance drop due to extra condition checks on the
datapath. Checking for external memory registration should be consolidated
to the existing bottom-half.
Fixes: 7e43a32ee060 ("net/mlx5: support externally allocated static memory")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch adds support for the rx_queue_count API in mlx5 driver
Signed-off-by: Tom Barbette <barbette@kth.se>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
When MLX PMD registers memory for DMA, it accesses the global memseg list
of DPDK to maximize the range of registration so that LKey search can be
more efficient. Granularity of MR registration is per page.
Externally allocated memory shouldn't be used for DMA because it can't be
searched in the memseg list and free event can't be tracked by DPDK. If it
is used, the following error will occur:
net_mlx5: port 0 unable to find virtually contiguous chunk for
address (0x5600017587c0). rte_memseg_contig_walk() failed.
There's a pending patchset [1] which enables externally allocated memory.
Once it is merged, users can register their own memory out of EAL then that
will resolve this issue.
Meanwhile, if the external memory is static (allocated on startup and never
freed), such memory can also be registered by little tweak in the code.
[1] http://patches.dpdk.org/project/dpdk/list/?series=1415
This patch is not a bug fix but needs to be included in stable versions.
Fixes: 974f1e7ef146 ("net/mlx5: add new memory region support")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Rxq cq_ci was 16 bits while hardware is expecting to wrap
around 24 bits, this caused interrupt failure after burst of packets.
Fixes: 43e9d9794cde ("net/mlx5: support upstream rdma-core")
Cc: stable@dpdk.org
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
There are dedicated QP attributes, tunnel offload flag and mask, which
must be configured in order to allow part of the HW tunnel offloads.
So, if a QP is pointed by a tunnel flow, the above QP attributes
should be configured.
The mask configuration is wrongly only performed if an internal RSS was
configured by the user, while there is no reason to condition the
tunnel offloads in RSS configurations.
Consequently, some of the tunnel offloads was not performed by the HW
when a tunnel flow was configured, for example, the packet tunnel
types was not reported to the user.
Replace the internal RSS condition with the tunnel flow condition.
Fixes: df6afd377ace ("net/mlx5: remove useless arguments in hrxq API")
Signed-off-by: Matan Azrad <matan@mellanox.com>
This patch adds support for building and running mlx5 PMD on
32bit systems such as i686.
The main issue to tackle was handling the 32bit access to the UAR
as quoted from the mlx5 PRM:
QP and CQ DoorBells require 64-bit writes. For best performance, it
is recommended to execute the QP/CQ DoorBell as a single 64-bit write
operation. For platforms that do not support 64 bit writes, it is
possible to issue the 64 bits DoorBells through two consecutive
writes,
each write 32 bits, as described below:
* The order of writing each of the Dwords is from lower to upper
addresses.
* No other DoorBell can be rung (or even start ringing) in the midst
of an on-going write of a DoorBell over a given UAR page.
The last rule implies that in a multi-threaded environment, the access
to a UAR page (which can be accessible by all threads in the process)
must be synchronized (for example, using a semaphore) unless an atomic
write of 64 bits in a single bus operation is guaranteed. Such a
synchronization is not required for when ringing DoorBells on different
UAR pages.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
RSS level is necessary to had a bit in the hash_fields which is already
provided in this API, for the tunnel, it is necessary to request such
queue to compute the checksum on the inner most, this last one should
always be activated.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
ConnectX 4-5 support only 40 bytes of RSS key, using a compiled size
hash key is not necessary.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Drop queues are essentially used in flows due to Verbs API, the
information if the fate of the flow is a drop or not is already present
in the flow. Due to this, drop queues can be fully mapped on regular
queues.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
This start a series to re-work the flow engine in mlx5 to easily support
flow conversion to Verbs or TC. This is necessary to handle both regular
flows and representors flows.
As the full file needs to be clean-up to re-write all items/actions
processing, this patch starts to disable the regular code and only let the
PMD to start in isolated mode.
After this patch flow API will not be usable.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Multi-Packet Receive Queue is to receive multiple packets on a single large
buffer. The number of consumed strides in CQE is accumulated to keep track
of the current stride index. However, it is safer to directly use stride
index in CQE to avoid out-of-order situation which can possibly be caused
by introducing LRO in the future.
If Rx CQE compression is enabled, HW can be configured to store the stride
index in a mini-CQE but this will need newer version of library/driver.
Therefore, since this change, MPRQ is only supported with the newer
library/driver and Rx hash result is not supported if MPRQ is enabled along
with Rx CQE compression.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Stride index is added to mlx5_mini_cqe8 structure and WQE ID is added to
mlx5_cqe structure.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This is to fix the offloads introduced by commits
5f8ba81 net/mlx5: support generic tunnel offloading
5355f44 ethdev: introduce generic IP/UDP tunnel checksum and TSO
Fixes: 8589e944d075 ("net/mlx5: fix setting offsets for SW parser")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Since ConnectX-5, SW parser just complements HW parser. SW parser starts to
engage only if HW parser can't reach a header. For the older devices, HW
parser will not kick in if any of SWP offsets is set. Therefore, all of the
L3 offsets should be set regardless of HW offload. As IPv6 doesn't have
header checksum, the mbuf can't have PKT_TX_[OUTER_]IP_CKSUM if outer or
inner L3 is IPv6.
And if inner packet isn't IP, the inner offsets shouldn't be set.
Fixes: 5f8ba81c4228 ("net/mlx5: support generic tunnel offloading")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Xueming Li <xuemingl@mellanox.com>
Multi-Packet Rx Queue (MPRQ a.k.a Striding RQ) can further save PCIe
bandwidth by posting a single large buffer for multiple packets. Instead of
posting a buffer per a packet, one large buffer is posted in order to
receive multiple packets on the buffer. A MPRQ buffer consists of multiple
fixed-size strides and each stride receives one packet.
Rx packet is mem-copied to a user-provided mbuf if the size of Rx packet is
comparatively small, or PMD attaches the Rx packet to the mbuf by external
buffer attachment - rte_pktmbuf_attach_extbuf(). A mempool for external
buffers will be allocated and managed by PMD.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This is the new design of Memory Region (MR) for mlx PMD, in order to:
- Accommodate the new memory hotplug model.
- Support non-contiguous Mempool.
There are multiple layers for MR search.
L0 is to look up the last-hit entry which is pointed by mr_ctrl->mru (Most
Recently Used). If L0 misses, L1 is to look up the address in a fixed-sized
array by linear search. L0/L1 is in an inline function -
mlx5_mr_lookup_cache().
If L1 misses, the bottom-half function is called to look up the address
from the bigger local cache of the queue. This is L2 - mlx5_mr_addr2mr_bh()
and it is not an inline function. Data structure for L2 is the Binary Tree.
If L2 misses, the search falls into the slowest path which takes locks in
order to access global device cache (priv->mr.cache) which is also a B-tree
and caches the original MR list (priv->mr.mr_list) of the device. Unless
the global cache is overflowed, it is all-inclusive of the MR list. This is
L3 - mlx5_mr_lookup_dev(). The size of the L3 cache table is limited and
can't be expanded on the fly due to deadlock. Refer to the comments in the
code for the details - mr_lookup_dev(). If L3 is overflowed, the list will
have to be searched directly bypassing the cache although it is slower.
If L3 misses, a new MR for the address should be created -
mlx5_mr_create(). When it creates a new MR, it tries to register adjacent
memsegs as much as possible which are virtually contiguous around the
address. This must take two locks - memory_hotplug_lock and
priv->mr.rwlock. Due to memory_hotplug_lock, there can't be any
allocation/free of memory inside.
In the free callback of the memory hotplug event, freed space is searched
from the MR list and corresponding bits are cleared from the bitmap of MRs.
This can fragment a MR and the MR will have multiple search entries in the
caches. Once there's a change by the event, the global cache must be
rebuilt and all the per-queue caches will be flushed as well. If memory is
frequently freed in run-time, that may cause jitter on dataplane processing
in the worst case by incurring MR cache flush and rebuild. But, it would be
the least probable scenario.
To guarantee the most optimal performance, it is highly recommended to use
an EAL option - '--socket-mem'. Then, the reserved memory will be pinned
and won't be freed dynamically. And it is also recommended to configure
per-lcore cache of Mempool. Even though there're many MRs for a device or
MRs are highly fragmented, the cache of Mempool will be much helpful to
reduce misses on per-queue caches anyway.
'--legacy-mem' is also supported.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
This patch removes current support of Memory Region (MR) in order to
accommodate the dynamic memory hotplug patch. This patch can be compiled
but traffic can't flow and HW will raise faults. Subsequent patches will
add new MR support.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Tunnel RSS level of flow RSS action offers user a choice to do RSS hash
calculation on inner or outer RSS fields. Testpmd flow command examples:
GRE flow inner RSS:
flow create 0 ingress pattern eth / ipv4 proto is 47 / gre / end
actions rss queues 1 2 end level 1 / end
GRE tunnel flow outer RSS:
flow create 0 ingress pattern eth / ipv4 proto is 47 / gre / end
actions rss queues 1 2 end level 0 / end
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Once tunnel packet type(RTE_PTYPE_TUNNEL_xxx) identified,
PKT_RX_IP_CKSUM_XXX and PKT_RX_L4_CKSUM_XXX represent checksum result of
inner headers, outer L3 and L4 header checksum are always valid as soon
as tunnel identified. If no tunnel identified, PKT_RX_IP_CKSUM_XXX and
PKT_RX_L4_CKSUM_XXX represent checksum result of outer L3 and L4
headers.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This patch introduced tunnel type identification based on flow rules.
If flows of multiple tunnel types built on same queue, no tunnel type
will be returned. User application could use bits in flow mark as tunnel
type identifier.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Since its inception, the rte_flow RSS action has been relying in part on
external struct rte_eth_rss_conf for compatibility with the legacy RSS API.
This structure lacks parameters such as the hash algorithm to use, and more
recently, a method to tell which layer RSS should be performed on [1].
Given struct rte_eth_rss_conf will never be flexible enough to represent a
complete RSS configuration (e.g. RETA table), this patch supersedes it by
extending the rte_flow RSS action directly.
A subsequent patch will add a field to use a non-default RSS hash
algorithm. To that end, a field named "types" replaces the field formerly
known as "rss_hf" and standing for "RSS hash functions" as it was
confusing. Actual RSS hash function types are defined by enum
rte_eth_hash_function.
This patch updates all PMDs and example applications accordingly.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
[1] commit 676b605182a5 ("doc: announce ethdev API change for RSS
configuration")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This commit adds support for generic tunnel TSO and checksum offload.
PMD will compute the inner/outer headers offset according to the
mbuf fields. Hardware will do calculation based on offsets and types.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Aligning Mellanox SPDX copyrights to a single format.
In addition replace to SPDX licence files which were missed.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This change removes the need to distinguish unlocked priv_*() functions
which are therefore renamed using a mlx5_*() prefix for consistency.
At the same time, all functions from mlx5 uses a pointer to the ETH device
instead of the one to the PMD private data.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reserving the memory space for the UAR near huge pages helps to
**reduce** the cases where the secondary process cannot start. Those
pages being physical pages they must be mapped at the same virtual
address as in the primary process to have a
working secondary process.
As this remap is almost the latest being done by the processes
(libraries, heaps, stacks are already loaded), similar to huge pages,
there is **no guarantee** this mechanism will always work.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Since commit f81ec748434b ("net/mlx5: fix memory region lookup") the
Memory Region (MR) are no longer overlaps.
Comparing the end address of the MR should be exclusive, otherwise two
contiguous MRs may cause wrong matching.
Fixes: f81ec748434b ("net/mlx5: fix memory region lookup")
Cc: stable@dpdk.org
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
In case Memory Region cache is full, the new mempool will be
inserted in the last index of the array.
Update the last entry being hit to reflect it.
Fixes: b0b093845793 ("net/mlx5: use buffer address for LKEY search")
Cc: stable@dpdk.org
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Memory registration can fail, add the proper warning for such scenario
for it at least to be visible in debug mode.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Verbs structs such as ibv_mr are not accessible from the secondary
process.
Choose to remove the assert in favor of performing more checks on the
critical data path.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
The Memory Region (MR) cache contains pointers to mlx5_mr.
The MR cache indexes are filled when a new MR is created. As it is
possible for MR to be created on the flight, an extra validation must be
added to avoid segmentation fault.
Fixes: b0b093845793 ("net/mlx5: use buffer address for LKEY search")
Cc: stable@dpdk.org
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This patch reverts:
commit 3a6f2eb8c5c5 ("net/mlx5: fix Memory Region registration")
Although granularity of chunks in a mempool is a cacheline, addresses are
extended to align to page boundary for performance reason in device when
registering a MR (Memory Region). This could make some regions overlap,
then can cause Tx completion error due to incorrect LKEY search. If the
error occurs, the Tx queue will get stuck. It is because buffer address is
compared against aligned addresses for Memory Region. Saving original
addresses of mempool for comparison doesn't create any overlap.
Fixes: b0b093845793 ("net/mlx5: use buffer address for LKEY search")
Fixes: 3a6f2eb8c5c5 ("net/mlx5: fix Memory Region registration")
Cc: stable@dpdk.org
Reported-by: Xueming Li <xuemingl@mellanox.com>
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Bit-fields in mlx5_rxq_data can be changed on the fly by a control plane -
e.g. rxq->mark. However, vectorized Rx uses a bit-field to mark pending
errors. Even if one bit is written, consequence is to write the whole
integer and this can cause a synchronization issue - two entities write to
a same block without locking. As the pending_err bit is entirely internal
use for the datapath, this can be replaced with a local variable.
Fixes: 6cb559d67b83 ("net/mlx5: add vectorized Rx/Tx burst for x86")
Fixes: 570acdb1da8a ("net/mlx5: add vectorized Rx/Tx burst for ARM")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Checking HW checksum offload flag for outer IP is missing. If flag is set
for only outer IP, this can't be set properly.
Fixes: f5fde5205101 ("net/mlx5: add hardware checksum offload for tunnel packets")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
