New MTU value is not propagated to vport in HW when MTU update request
is sent while ports are stopped.
This patch fixes the logic error for above mentioned condition.
Fixes: d121a6b5f7 ("net/qede: fix VF MTU update")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Reviewed-by: Rasesh Mody <rmody@marvell.com>
In our testing we have identified a critical FW bug. Performance
is degraded significantly for certain packet sizes with 8.40.25.0 FW.
This patch updates the FW to version 8.40.33.0. The updated FW has a
fix to performance issue.
The patch also adds initialization for FW overlay RAM as part of
hardware initialization which is required by the new FW.
Fixes: 3b307c55f2 ("net/qede/base: update FW to 8.40.25.0")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
During LTO build compiler reports some 'false positive' warnings about
variables being possibly used uninitialized. This patch silences these
warnings.
Exemplary compiler warning to suppress (with LTO enabled):
error: ‘transceiver_type’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
switch (transceiver_type) {
Signed-off-by: Andrzej Ostruszka <aostruszka@marvell.com>
This patch updates the FW to 8.40.25.0 and corresponding base driver
changes. It also updates the PMD version to 2.11.0.1. The FW updates
consists of enhancements and fixes as described below.
- VF RX queue start ramrod can get stuck due to completion error.
Return EQ completion with error, when fail to load VF data. Use VF
FID in RX queue start ramrod
- Fix big receive buffer initialization for 100G to address failure
leading to BRB hardware assertion
- GRE tunnel traffic doesn't run when non-L2 ethernet protocol is
enabled, fix FW to not forward tunneled SYN packets to LL2.
- Fix the FW assert that is caused during vport_update when
tx-switching is enabled
- Add initial FW support for VF Representors
- Add ecore_get_hsi_def_val() API to get default HSI values
- Move following from .c to .h files:
TSTORM_QZONE_START and MSTORM_QZONE_START
enum ilt_clients
renamed struct ecore_dma_mem to phys_mem_desc and moved
- Add ecore_cxt_set_cli() and ecore_cxt_set_blk() APIs to set client
config and block details
- Use SET_FIELD() macro where appropriate
- Address spell check and code alignment issues
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Update hardware software common base driver code in preparation to
update the firmware to version 8.40.25.0.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Move DMA engine (DMAE) structures from base driver to HSI module.
Use DMAE_PARAMS_* in place of ECORE_DMAE_FLAG_*.
Enforce SET_FIELD() macro where appropriate.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Update and add runtime array offsets (rt defs), non-volatile memory
configuration options (nvm cfg) and management co-processor (mcp)
shared code in preparation to update the firmware to version 8.40.25.0.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Multiple flows can issue QM reconfiguration, hence hold the lock longer
to account for entire duration of reconfiguration flow.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
ecore_chain_set_prod/cons() sets the wrong page index in chains with
non-power of 2 page count. Fix ecore_chain_set_prod/cons() for PBL
chains with non power of 2 page count.
Calculate the right page index according to current indexes.
Fixes: ec94dbc573 ("qede: add base driver")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Caught by clang, this idx value is only used for a debug message when
the mbufs allocation fails.
No need to use idx as a temporary storage.
Fixes: 8f23124745 ("net/qede: fix performance bottleneck in Rx path")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Enabling/disabling of allmulticast mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change return value of the callbacks from void to int. Make
implementations across all drivers return negative errno
values in case of error conditions.
Both callbacks are updated together because a large number of
drivers assign the same function to both callbacks.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enabling/disabling of promiscuous mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change eth_dev_infos_get_t return value from void to int.
Make eth_dev_infos_get_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add support to configure drop action in rte_flow
infrastructure and add counter for dropped
packets due to this filter action "rx_gft_filter_drop".
Also, update supported flows and actions in qede guide.
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
As per new method, need to consider hw stats of queues from
both engines. This patch fixes the stats collection flow accordingly.
Fixes: 2af14ca79c ("net/qede: support 100G")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
With old design, RETA was configured in round-robin fashion since
queue allocation was distributed across both engines alternately.
Now, we need to configure RETA symmetrically on both engines since
both engines have same number of queues.
Fixes: 2af14ca79c ("net/qede: support 100G")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
As per HW design of 100Gb mode, device internally uses 2 engines
(eng0 and eng1), and both engines need to be configured symmetrically.
Based on this requirement, driver design chose an approach
to allow user to allocate only even number of queues and split
those queues on both engines equally.
This approach puts a limitation on number of queues to be allocated -
i.e. user can't configure odd number of queues on 100Gb mode.
OVS configures DPDK port with 1 rxq and 1 txq, which causes initialization
of qede port to fail.
Issue is fixed by changing the implementation of queue allocation and
assignment to hw engines only for 100Gb devices and allowing user to
configure odd number queues.
New approach works as below -
- Create 'struct qede_fastpath_cmt' to hold hw queue pair of both engines
and provide it to rte_ethdev's Rx/Tx queues structure.
- So ethdev will see only one queue for underlying queue pair created for
hw engine pair.
- Install separate Rx/Tx data path handlers for 100Gb mode and regular mode
- Rx/Tx handlers for 100Gb mode will split packet processing across both
engines by providing hw queue structures from 'struct qede_fastpath_cmt'
passed by Rx/Tx callbacks to respective engines.
Fixes: 2af14ca79c ("net/qede: support 100G")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
This patch refactors Rx and Tx queue setup flow required to allow
odd number of queues to be configured in next patch.
This is the first patch of the series required to fix an issue
where qede port initialization in ovs-dpdk fails due to 1 Rx/Tx queue
configuration. Detailed explanation is given in next patch.
Fixes: 2af14ca79c ("net/qede: support 100G")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Replace rte_intr_enable() with rte_intr_ack() API
for acking an interrupt in interrupt handlers and
rx_queue_intr_enable() callbacks of PMD's.
This is inline with original intent of this change in PMDs
to ack interrupts after handling is completed if
device is backed by UIO, IGB_UIO or VFIO(with INTx).
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Shahed Shaikh <shshaikh@marvell.com>
Tested-by: Shahed Shaikh <shshaikh@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
The incriminated commit broke the use of RTE_PCI_DRV_IOVA_AS_VA which
was intended to mean "driver only supports VA" but had been understood
as "driver supports both PA and VA" by most net drivers and used to let
dpdk processes to run as non root (which do not have access to physical
addresses on recent kernels).
The check on physical addresses actually closed the gap for those
drivers. We don't need to mark them with RTE_PCI_DRV_IOVA_AS_VA and this
flag can retain its intended meaning.
Document explicitly its meaning.
We can check that a driver requirement wrt to IOVA mode is fulfilled
before trying to probe a device.
Finally, document the heuristic used to select the IOVA mode and hope
that we won't break it again.
Fixes: 703458e19c ("bus/pci: consider only usable devices for IOVA mode")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This driver had a bogus assert which could never happen.
This triggers "expression is always false warnings" with some
compilers which causes build failure.
Just remove it.
Fixes: 2af14ca79c ("net/qede: support 100G")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Rasesh Mody <rmody@marvell.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Since we change these macros, we might as well avoid triggering complaints
from checkpatch because of mixed case.
old=RTE_IPv4
new=RTE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
old=RTE_ETHER_TYPE_IPv4
new=RTE_ETHER_TYPE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
old=RTE_ETHER_TYPE_IPv6
new=RTE_ETHER_TYPE_IPV6
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
snprintf guarantees to always correctly place a null terminator
in the buffer string. So manually placing a null terminator
in a buffer right after a call to snprintf is redundant code.
Additionally, there is no need to use 'sizeof(buffer) - 1' in snprintf as this
means we are not using the last character in the buffer. 'sizeof(buffer)' is
enough.
Cc: stable@dpdk.org
Signed-off-by: Michael Santana <msantana@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Do a global replace of snprintf(..."%s",...) with strlcpy, adding in the
rte_string_fns.h header if needed. The function changes in this patch were
auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy.cocci --dir . --in-place
and then the files edited using awk to add in the missing header:
gawk -i inplace '/include <rte_/ && ! seen { \
print "#include <rte_string_fns.h>"; seen=1} {print}'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
There is a corner case in which driver won't post
receive buffers when driver has processed all received packets
in single loop (i.e. hw_consumer == sw_consumer) and then
HW will start dropping packets since it did not see new receive
buffers posted.
This corner case is seen when size of Rx ring is less than or equals
Rx packet burst count for dev->rx_pkt_burst().
Fixes: 8f23124745 ("net/qede: fix performance bottleneck in Rx path")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Set RTE_PCI_DRV_IOVA_AS_VA in drv_flags. This allows initializing qede
PMD as non-root also on Linux v4.x, where /proc/self/pagemap can't be
acccessed without CAP_SYS_ADMIN privileges.
The flag was introduced generically but not in pmds in:
commit 815c7deaed ("pci: get IOMMU class on Linux")
Cc: stable@dpdk.org
Acked-by: Shahed Shaikh <shshaikh@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Shifting signed 32-bit values by 31-bits has the potential for
unexpected outcomes as compiler can overwrite a bit.
Specified that values are unsigned.
Errors are observed from running cppcheck.
Bugzilla ID: 58
Fixes: 69e209be54 ("net/axgbe: add register map and related macros")
Fixes: b5bf771922 ("bnx2x: driver support routines")
Fixes: ed2ced6fe9 ("net/bnxt: check initialization before accessing stats")
Fixes: 6fda3f0ddd ("net/cxgbe: add API to program hardware MPS table")
Fixes: bdb244b969 ("e1000: whitespace changes")
Fixes: 5a32a257f9 ("e1000: more NICs in base driver")
Fixes: 2fe669f4bc ("net/nfp: support MAC address change")
Fixes: defb9a5dd1 ("nfp: introduce driver initialization")
Fixes: ec94dbc573 ("qede: add base driver")
Fixes: d2e7d931d0 ("net/qede/base: formatting changes")
Fixes: cdc07e83bb ("net/tap: add eBPF program file")
Cc: stable@dpdk.org
Signed-off-by: Andrius Sirvys <andrius.sirvys@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch fixes a regression introduced by
commit 49d3978d57 ("net/qede: fix Tx tunnel offload support mask")
in which qede_xmit_prep_pkts() breaks the loop for successful
check of Tunneling offload flags instead of continuing, resulting
in tx_pkt_prepare return a failure.
Fixes: 49d3978d57 ("net/qede: fix Tx tunnel offload support mask")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Incorrect placement of prefetch in Tx path is causing
a performance drop of around ~2% on AMD platform.
Fixes: 2ea6f76aff ("qede: add core driver")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Allocating replacement buffer per received packet is expensive.
Instead, process received packets first and allocate
replacement buffers in bulk later.
This improves performance by ~25% in terms of PPS on AMD
platforms.
Fixes: 2ea6f76aff ("qede: add core driver")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Following commit updated the Tx offload mask
commit 1037ed842c ("mbuf: fix Tx offload mask").
So, not having PKT_TX_IPV6 and PKT_TX_IPV4 in qede PMDs supported
Tx offload mask breaks TSO support since application will fail in transmit
prepare function.
Fixes: 1037ed842c ("mbuf: fix Tx offload mask")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Tunneling offloads are represented by multi-bit values. So, feature
wise tunneling offload can only be entirely supported/unsupported
using PKT_TX_TUNNEL_MASK. Its upon PMDs to further isolate which of
the tunneling offload types are supported by respective PMD.
Using subset of bits from PKT_TX_TUNNEL_MASK to indicate supported vs
unsupported offloads can lead to undesired result.
Use PKT_TX_TUNNEL_MASK in QEDE_TX_OFFLOAD_MASK and use independent
value of supported PKT_TX_TUNNEL_* in .tx_pkt_prepare() to mark
supported tunnel offloads.
Fixes: 44346c24b7 ("net/qede: fix VXLAN tunnel Tx offload flag setting")
Cc: stable@dpdk.org
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Reviewed-by: Rasesh Mody <rasesh.mody@cavium.com>
Currently, if configuration fails (for example if a 100G card is used
with an odd number of RX/TX queues) QEDE crashes due to a null pointer
dereference.
This commit fixes it by checking that the pointer is not NULL before
using it.
Fixes: 7105b24f4b ("net/qede: fix memory alloc for multiple port reconfig")
Cc: stable@dpdk.org
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Acked-by: Rasesh Mody <rasesh.mody@cavium.com>
During initialization of leading PF, we need to initialize HW for LLH
filters. Set HW init parameter to set the engine affinity for
multiple engine adapters.
Fixes: 3eed444a96 ("net/qede/base: changes for 100G")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Some global variables are defined with generic names, add component name
as prefix to variables to prevent collusion with application variables.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Some global variables can indeed be static, add static keyword to them.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This functionality was missed while adding new drivers to
the meson build.
Fixes: bfabd06000 ("net/avf: support meson build")
Fixes: 30d3d01683 ("net/qede: add in meson build")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
