Use specialized dynamic log type for vdev bus logging.
Suggested-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Suggested-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Move the vdev bus from lib/librte_eal to drivers/bus.
As the crypto vdev helper function refers to data structure
in rte_vdev.h, so we move those helper function into drivers/bus
too.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Remove rte_cryptodev_create_vdev() for duplication.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Introduce a new iommu-support parameter to Vhost PMD that
passes the RTE_VHOST_USER_IOMMU_SUPPORT flag at vhost
device register time.
Default value is 0, meaning that IOMMU support is disabled
if not specified explicitly.
Example to enable IOMMU support for a given device:
--vdev 'net_vhost0,iface=/tmp/vhost-user2,iommu-support=1'
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Tested-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Qemu versions from v2.7.0 to v2.9.0 have their reply-ack protocol
feature implementation broken with multiqueue. The reply-ack
protocol feature is optional except for IOMMU feature.
This patch introduce a new RTE_VHOST_USER_IOMMU_SUPPORT flag to
enable VIRTIO_F_IOMMU_PLATFORM virtio feature.
By default, the IOMMU support is now disabled.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Tested-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
If the application has disabled VIRTIO_F_IOMMU_PLATFORM, disable
VHOST_USER_PROTOCOL_F_REPLY_ACK protocol feature that is only
mandatory with IOMMU for now.
This is done to provide a way for the application to support
multiqueue with old Qemu versions (v2.7.0 to v2.9.0) that have
reply-ack feature broken.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Tested-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
This patch enhances the Rx packet type offload to also report the L4
protocol information in the hw ptype filled by the PMD for each received
packet.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
In open_single_tx_pcap there is a call to pcap_open_dead which calls
malloc to create and return a pcap_t. That object is never freed in
this case. Other places it is freed by passing it back similar to the
way the pcap_dumper_t is in this case.
The pcap_t is only used to create the pcap_dumper_t and is never used
again so freeing it here is safe and much simpler than trying to pass
it back to be freed in eth_dev_stop along with the other
pcap_t/pcap_dumper_t objects.
Fixes: 4c173302c3 ("pcap: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Stefan Baranoff <sbaranoff@gmail.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch removes the forward declaration of eth_kni_drv
in rte_eth_kni.c; this forward declaration was made unnecessary
by commit 050fe6e9ff
("drivers/net: use ethdev allocation helper for vdev"), which
removes the usage of eth_kni_drv in the eth_kni_create() method.
Fixes: 050fe6e9ff ("drivers/net: use ethdev allocation helper for vdev")
Cc: stable@dpdk.org
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
While the PMD avoids from creating hash RXQ with no hash fields and
array of queues after the port was already started, it lacks such
protection when re-creating the flows after the port restarts.
This may lead to inconsistent behavior for flows depending if they were
created before or after the port start.
Fixes: 8086cf08b2 ("net/mlx5: handle RSS hash configuration in RSS flow")
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
When using VFIO and MSIX interrupt mode, cannot get Rx interrupts. Because
when enabling the interrupt vectors, the offset is computed in a way which
only supports IGB_UIO. But the offset should be different when using VFIO.
This patch fixes this issue.
Fixes: c3cd3de0ab ("igb: enable Rx queue interrupts for PF")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Check return value of fseek and exit if non zero.
Coverity issue: 143435
Fixes: bab16ddaf2 ("examples/flow_classify: add sample application")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
With -f-strict-aliasing enabled by default from -O2, gcc > 5.x gives
undefined behavior in port_groupx4 in ARM. 'pn' and 'pnum' are
two different pointers pointing to same chunk of memory and
with -f-strict-aliasing the pointers are assumed to be pointing to
different memory and compiler reorders instructions that depend on
pnum and pn. This breaks port grouping algorithm.
This patch eliminates the above problem by introducing a compiler
barrier between the instructions that depend on pnum, pn and lp.
Fixes: 569b290cdb ("examples/l3fwd: add NEON implementation")
Cc: stable@dpdk.org
Signed-off-by: Guduri Prathyusha <gprathyusha@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Jianbo Liu <jianbo.liu@arm.com>
To group consecutive packets with same destination port in bursts of 4
neon intrinsic data types dp1 and dp2 are calculated such that if
dst_port[]={a,b,c,d,e,f,g,h,i...} dp1 should contain: <a,b,c,d> and
dp2 should contain: <b,c,d,e> in the first iteration. dp1 should
be <e,f,g,h> and dp2 should be <f,g,h,i> in the next iteration.
Whereas the existing code incorrectly calculates dp1 as <d,e,f,g> from
second iteration.
This patch fixes the incorrect ARM NEON instructions on dp1.
Fixes: 569b290cdb ("examples/l3fwd: add NEON implementation")
Cc: stable@dpdk.org
Signed-off-by: Guduri Prathyusha <gprathyusha@caviumnetworks.com>
Acked-by: Jianbo Liu <jianbo.liu@arm.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Implement the same hash functions with crc32 on arm platform.
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Hash table function will check if the input bucket size is power of 2,
so the parameter should be rounded up before sending to the creating
function.
Signed-off-by: Jianbo Liu <jianbo.liu@arm.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The mempool and the physical address of the crypto operation
at mempool initialization were not being set,
leading to incorrect physical addresses.
Fixes: bf9d6702ec ("app/crypto-perf: use single mempool")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Some drivers might allow to commit the traffic management hierarchy
while being in running state. Therefore, removes port status check
before invoking hierarchy commit API in the cli. If needed, device can
add port status check at the driver layer.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
failsafe device has vlan stripping configured at startup however once
a sub device is found as non-capable of vlan-stripping failsafe
updates it configuration and removes vlan stripping from it.
This update occurs only once at startup. Following a later plugin
attempt and in case of vlan stripping mismatch between failsafe
configuration and device capability - failsafe cannot recover and the
device remains constantly in plug out state.
The sequence of events leading to this situation is described as
follows:
1. Start testpmd with failsafe where mlx4 is a sub device (not capable
of vlan stripping). Expected printout:
PMD: net_failsafe: Disabling VLAN stripping offload
2. Execute:
testpmd> port stop all
testpmd> port config all max-pkt-len 2048
testpmd> port start all
3. Do a plug out (e.g. disable sriov)
4. Do a plug in (e.g. enable sriov)
5. Expected result: failsafe successfully configures and starts its sub
devices
Actual result: failsafe is continuously failing with these messages:
PMD: net_failsafe: VLAN stripping offload requested but not supported by
sub_device 0
PMD: net_failsafe: device already configured, cannot fix live
configuration
PMD: net_failsafe: Unable to synchronize sub device state
Root cause analysis: at startup failsafe removes vlan stripping from its
configuration. After executing "port config all max-pkt-len 2048"
testpmd marks failsafe in need for configuration update.
After executing "port start all" testpmd overrides failsafe
configuration with its own configuration which includes vlan stripping
During the plugin attempt failsafe refuses to update its configuration
by removing vlan stripping since it has already updated its
configuration at startup.
The fix is for failsafe to stop validation and disabling non-supported
offloads in its sub-devices.
Fixes: bbc6a53dda ("net/failsafe: support Rx offload capabilities")
Cc: stable@dpdk.org
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Memory regions assigned to hardware and used during Tx/Rx are mapped to
mbuf pools. Each Rx queue creates its own MR based on the mempool
provided during queue setup, while each Tx queue looks up and registers
MRs for all existing mbuf pools instead.
Since most applications use few large mbuf pools (usually only a single
one per NUMA node) common to all Tx/Rx queues, the above approach wastes
hardware resources due to redundant MRs. This negatively affects
performance, particularly with large numbers of queues.
This patch therefore makes the entire MR registration common to all
queues using a reference count. A spinlock is added to protect against
asynchronous registration that may occur from the Tx side where new
mempools are discovered based on mbuf data.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This is done for consistency with the rest of the code.
Fixes: 078b8b452e ("net/mlx4: add RSS flow rule action support")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Replace most of the memory barriers by IO memory barriers since they
are all targeted to the DRAM; This improves code efficiency for
systems which force store order between different addresses.
Only the doorbell register store should be protected by memory barrier
since it is targeted to the PCI memory domain.
Limit pre byte count store IO memory barrier for systems with cache
line size smaller than 64B (TXBB size).
This patch improves Tx performance by 0.2MPPS for one segment 64B
packets via 1 queue with 1 core test.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Optimize single segment case by processing it in different block which
prevents checks, calculations and barriers relevant only for multi
segment case.
Call a dedicated function for handling multi segments case.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Remove usage of variable which count the packets for completion and
doesn't add more information than packets counter.
Remove no space in elements ring check which is already covered by
regular Tx flow.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Associate memory region to mempool (on data path) in a short function.
Handle the less common case of adding a new memory region to mempool
in a separate function.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
When a VF port is bound to VFIO-PCI, miscellaneous interrupt is
mapped to MSI-X vector 0 and Rx queues interrupt are mapped to
other vectors in vfio_enable_msix( ). To simplify implementation,
all VFIO-PCI bound i40e VF Rx queue interrupts can be mapped in
vector 1. And as current igb_uio only support only one vector,
i40e VF PMD should use vector 0 for igb_uio and vector 1 for
VFIO-PCI. Without this patch, VF Rx queue interrupt is mapped
to vector 0 in register settings and mapped to VFIO vector 1
in vfio_enable_msix( ), and then all Rx queue interrupts will
be missed.
Also remove 2 unused macro definitions.
Fixes: 4b90a3ff26 ("i40evf: support Rx interrupt")
Fixes: 975ffea6f6 ("net/i40e: remove DPDK PF version specific code")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
When a VF port is bound to VFIO-PIC, only miscellaneous interrupt
is mapped to VFIO vector 0 in i40evf_dev_init( ).
In i40evf_dev_interrupt_handle( ) and i40evf_dev_rx_queue_intr_enable( ),
if previous VFIO interrupt mapping set in i40evf_dev_init( ) is not
cleared, it will fail when PMD tries to map Rx queue interrupt to other
VFIO vectors by calling rte_intr_enable( ).
This patch clears the VFIO interrupt mappings before setting both
miscellaneous and Rx queue interrupt mappings again to avoid failure.
And remove the calling of rte_intr_enable( ) in
i40evf_dev_interrupt_handler( ) as there is no need to map VFIO interrupt
in this function repeatedly.
Fixes: 4b90a3ff26 ("i40evf: support Rx interrupt")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The action for L2 tunnel should be VF or PF, not QUEUE.
Fixes: 99e7003831 ("net/ixgbe: parse L2 tunnel filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
At the end of the queue release, we can free the containers for the
queue objects.
Fixes: dfaff37fc4 ("vmxnet3: import new vmxnet3 poll mode driver implementation")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <chas3@att.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
VLAN id is limited to MLX5_MAX_VLAN_IDS which is not verified by the code
before trying to add a new VLAN filter.
Fixes: 272733b5eb ("net/mlx5: use flow to enable unicast traffic")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
In case errno contains some non-zero value and call to strtoul() is
successful -2 error will be returned.
Setting errno to zero before calling strtoul() makes sure
errors will be handled correctly.
Fixes: 0ddc9b815b ("net/mrvl: add net PMD skeleton")
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
A check was previously added to drop Tx packets greater than what the Nic
is capable of sending since such packets can freeze the send queue. The
check did not account for TSO packets however, so TSO was limited to 9208
bytes.
Check packet length only for non-TSO packets. Also insure that TSO packet
segment size plus the headers do not exceed what the Nic is capable of
since this also can freeze the send queue.
Use the PKT_TX_TCP_SEG ol_flag instead of m->tso_segsz which is the
preferred way to check for TSO.
Fixes: ed6e564c21 ("net/enic: fix memory leak with oversized Tx packets")
Cc: stable@dpdk.org
Signed-off-by: John Daley <johndale@cisco.com>