This patch adds testpmd cmdline support for PPPoE.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The rte_service_lcore_reset_all function stops execution of services
on all lcores and switches them back from ROLE_SERVICE to ROLE_RTE.
However the thread loop for slave lcores (eal_thread_loop) distincts these
roles to set lcore state after processing delegated function.
It sets WAIT state for ROLE_SERVICE, but FINISHED for ROLE_RTE.
So changing the role to RTE before stopping work in slave lcores
causes lcores to end in FINISHED state. That is why the rte_eal_lcore_wait
must be run after rte_service_lcore_reset_all to bring back lcores to
launchable (WAIT) state.
This has been fixed in test app and clarified in API documentation.
Setting the state to WAIT in rte_service_runner_func is premature
as the rte_service_runner_func function is still a part of the lcore
function delegated to slave lcore. The state is overwritten anyway in
slave lcore thread loop. This premature setting state to WAIT might
however cause rte_eal_lcore_wait, that was called by the application,
to return before slave lcore thread set the FINISHED state. That's
why it is removed from librte_eal rte_service_runner_func function.
Bugzilla ID: 464
Fixes: 21698354c8 ("service: introduce service cores concept")
Fixes: f038a81e1c ("service: add unit tests")
Cc: stable@dpdk.org
Reported-by: Sarosh Arif <sarosh.arif@emumba.com>
Signed-off-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add a new option for PDCP cases to enable use of session
based fixed HFN value instead of per packet HFN which was
enabled by hfn override feature.
By default HFN override is enabled and if session based
fixed HFN need to be tested, add "--pdcp-ses-hfn-en" in the
command line.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
As per current framework of PDCP testing, app can only support
either HFN override or fixed session HFN values but not both.
Now to enable both, either we duplicate all PDCP cases(>100)
for both override and fixed HFN. It will look clumsy as the
number of cases will be very high without much value addition.
Now to overcome this, we can do HFN override for Downlink cases
and fixed HFN for uplink cases. This way we will not loose the
test coverage and there will not be duplicacy in the test cases.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch enables the generic crypto tests for OCTEON TX and
OCTEON TX2 PMDs. Removes the PMD specific tests.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch removes the OCTEON TX and OCTEON TX2 PMDs specific
test cases related to null cipher.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add unit tests for DOCSIS capabilitity checks.
Signed-off-by: David Coyle <david.coyle@intel.com>
Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add uplink and downlink DOCSIS unit test cases and vectors, to test
the combined DOCSIS Crypto-CRC support that has been added to the
rte_security library.
Signed-off-by: David Coyle <david.coyle@intel.com>
Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch fixes the element size of the mempool used
for allocating asym crypto sessions and their private data.
Fixes: 2c6dab9cd9 ("test/crypto: add RSA and Mod tests")
Cc: stable@dpdk.org
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The multiprocess feature has been implicitly enabled so far.
Applications might want to explicitly disable like when using the
non-EAL threads registration API.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add a helper to iterate all lcores.
The iterator callback is read-only wrt the lcores list.
Implement a dump function on top of this for debugging.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
DPDK components and applications can have their say when a new lcore is
initialized. For this, they can register a callback for initializing and
releasing their private data.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
DPDK allows calling some part of its API from a non-EAL thread but this
has some limitations.
OVS (and other applications) has its own thread management but still
want to avoid such limitations by hacking RTE_PER_LCORE(_lcore_id) and
faking EAL threads potentially unknown of some DPDK component.
Introduce a new API to register non-EAL thread and associate them to a
free lcore with a new NON_EAL role.
This role denotes lcores that do not run DPDK mainloop and as such
prevents use of rte_eal_wait_lcore() and consorts.
Multiprocess is not supported as the need for cohabitation with this new
feature is unclear at the moment.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The test checks that the service may be active API works
when there are two cores: a non-service lcore and a service one.
The API notes to take care when checking the status of a running
service, but the test setup allows for a safe usage in that case.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
This commit fixes the setting of relative rpath on dpdk-test for
drivers ($libdir/dpdk/pmd-$abiver) to the correct absolute rpath
($prefix$libdir/dpdk/pmd-$abiver).
Fixes: b5dc795a8a ("test: build app with meson as dpdk-test")
Cc: stable@dpdk.org
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
RTE_TRACE_POINT_DEFINE and RTE_TRACE_POINT_REGISTER must come in pairs.
Merge them and let RTE_TRACE_POINT_REGISTER handle the constructor part.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The node library had a need of being linked as a whole
to make some constructors effective.
Now that all libraries are linked with --whole-archive,
there is no need to have this library separate.
Fixes: e2db26f766 ("build: always link whole DPDK static libraries")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Rename test_ring_peek_stress to test_ring_mt_peek_stress to
keep same naming conventions for ST and MT test cases.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Introduce new test case to test ST peek API.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Rework test code to reduce code complexity for the compiler and
bring down compilation time and memory consumption.
Current test_ring_enqueue/test_ring_dequeue functions contain
too many branches and it takes compiler a lot of effort to resolve all
of them at compile time.
So the patch replaces these branchy function invocations
with an array of function pointers (test_enqdeq_impl[]).
That way compiler knows straightway which function to use
for each particular case.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Since all libraries are explicitly linked as part of a build, we no longer
need to track ones that should be always included for linking against apps.
Previously telemetry was special-cased for linking as it was not directly
needed by the linker when linking the apps, since they never called into it
directly. This meant that it could be forgotten when specifying the app
dependencies, and so the telemetry support would not work. This
special-casing was never needed for make as it always linked in all
libraries, as meson does now.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Sunil Pai G <sunil.pai.g@intel.com>
To ensure all constructors are included in static build, we need to pass
the --whole-archive flag when linking, which is used with the
"link_whole" meson option. Since we use link_whole for all libs, we no
longer need to track the lib as part of the static dependency, just the
path to the headers for compiling.
After this patch is applied, all DPDK .a files are inside
--whole-archive/--no-whole-archive flags, but external dependencies and
shared libs being linked against remain outside.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Andrzej Ostruszka <aostruszka@marvell.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Sunil Pai G <sunil.pai.g@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
If the bonding pmd is disabled, all autotest associated with it should be
disabled. However, some of those tests also depended upon the ring PMD so
were placed in a block depending on that driver - and unfortunately that
driver alone. This caused build failures if the ring PMD was enabled but
the bonding PMD disabled, due to missing header files and driver libs.
This error can be reproduced by configuring DPDK using e.g.
meson configure -Ddisable_drivers=net/[!r]* build
(which will disable all drivers not starting with "r"), and then building
using ninja.
Fix this by moving all link bonding autotests to the one block and putting
a second conditional check within that block for those also requiring the
ring PMD.
Fixes: 7f6ef16640 ("test/bonding: allow disabling driver")
Fixes: 207b1c813f ("test: fix build without ring PMD")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
In size 32 bulk ring enq/dequeue performance test, the "Total count"
statistics is incorrect. For example, running the test on lcore 25 and
lcore 26, the output is as follows:
The test command:
$sudo ./arm64-armv8a-linuxapp-gcc/app/test -l 25-26
RTE>>ring_perf_autotest
Bulk enq/dequeue count on size 32
Core [25] count = 288268
Core [26] count = 288281
Total count (size: 32): 1066323
Fixed it by reset the counter at the beginning of each loop. The
revised output is as follows:
Bulk enq/dequeue count on size 32
Core [25] count = 285643
Core [26] count = 285688
Total count (size: 32): 571331
Fixes: 759cf9b563 ("test/ring: enhance mp/mc coverage")
Cc: stable@dpdk.org
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The macro __rte_cache_aligned is better suited for aligning
a structure on a cache line (of any size).
Fixes: 15c4318640 ("app/flow-perf: add packet forwarding support")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Wisam Jaddo <wisamm@mellanox.com>
Introduce packet forwarding support to the app to do
some performance measurements.
The measurements are reported in term of packet per
second unit. The forwarding will start after the end
of insertion/deletion operations.
The support has single and multi performance measurements.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
Introduce new feature to dump memory statistics of each socket
and a total for all before and after the creation.
This will give two main advantage:
1- Check the memory consumption for large number of flows
"insertion rate scenario alone"
2- Check that no memory leackage after doing insertion then
deletion.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
Add the ability to test deletion rate for flow performance
application.
This feature is disabled by default, and can be enabled by
add "--deletion-rate" in the application command line options.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
Add insertion rate calculation feature into flow
performance application.
The application now provide the ability to test
insertion rate of specific rte_flow rule, by
stressing it to the NIC, and calculate the
insertion rate.
The application offers some options in the command
line, to configure which rule to apply.
After that the application will start producing
rules with same pattern but increasing the outer IP
source address by 1 each time, thus it will give
different flow each time, and all other items will
have open masks.
The current design have single core insertion rate.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
Caught by code review, bitops test name is incorrect.
Fixes: 7660614c11 ("test/bitops: add bit operations test case")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Phil Yang <phil.yang@arm.com>
To fill the gap with linux kernel eBPF implementation,
add support for two non-generic instructions:
(BPF_ABS | <size> | BPF_LD) and (BPF_IND | <size> | BPF_LD)
which are used to access packet data.
These instructions can only be used when BPF context is a pointer
to 'struct rte_mbuf' (i.e: RTE_BPF_ARG_PTR_MBUF type).
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Address for few small issues:
- unreachable return statement
- failed test-case can finish with 'success' status
Also use unified cmp_res() function to check return value.
Cc: stable@dpdk.org
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
MTU is used in testpmd to set the maximum payload size for packets.
According to testpmd, the setting influence RX only.
In rte_ethdev there's no relation between MTU setting and JUMBO offload
or rx_max_pkt_len.
The previous fix in patch referenced below was meant to update the
correlated variables of max_pkt_len and JUMBO offload, but by doing so
it assumes that MTU setting can only exist when JUMBO offload supported
in the device. For example fail-safe device does supports set MTU and
doesn't support JUMBO offload, and in this case, though set MTU
succeeds, an error message is still printed since the JUMBO packet
offload is disabled.
The fix separates the two conditions to make sure the error
triggers only in case the set_mtu action actually failed.
Fixes: 150c9ac2df ("app/testpmd: update Rx offload after setting MTU")
Cc: stable@dpdk.org
Signed-off-by: Shy Shyman <shys@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Add test cases for setting bit, clearing bit, testing
and setting bit, testing and clearing bit operation.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
There are coverity defects related "Argument cannot be negative"
This patch fixes them by passing '-ret' to the function strerror() when
ret is negative.
Coverity issue: 349913, 358437, 358449, 358450
Fixes: da328f7f11 ("ethdev: change xstats reset function to return int")
Fixes: 9eb974221f ("app/testpmd: fix statistics after reset")
Cc: stable@dpdk.org
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Check returned value after strtok()
CID 355674 (#1 of 1): Dereference null return value (NULL_RETURNS)
4. dereference: Dereferencing a pointer that might be NULL s when
calling inet_pton
Fixes: 103809d032 ("app/test-fib: add test application for FIB")
Cc: stable@dpdk.org
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Both bitratestats_autotest latency test initializes the metrics library.
It should be cleaned during exit.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: David Marchand <david.marchand@redhat.com>
When set DCB in testpmd, there is a segmentation fault. It is
because the local variable rss_conf in get_eth_dcb_conf()
is not cleared, so that the pointer member variable rss_key has
a random address, which leads to an error in the following
processing. This patch initialized the local variable rss_conf
to avoid this situation.
Fixes: ac7c491c3f ("app/testpmd: fix DCB config")
Cc: stable@dpdk.org
Signed-off-by: Ting Xu <ting.xu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Change printing of CPU cycles/packet to include fractional part for
accurateness.
Example:
Without patch:
CPU cycles/packet=14
(total cycles=4899533541 / total RX packets=343031966)
With patch:
CPU cycles/packet=14.28
(total cycles=4899533541 / total RX packets=343031966)
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
On aarch64 platforms, the cycles are counted using either a
low-resolution generic counter or a high-resolution PMU cycle counter.
Print the clock frequency along with CPU cycles/packet to identify which
cycle counter is being used.
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The test case - test_stats is directly accessing the
cryptodev and its dev_ops which are internal to library
and should not be used directly by the application.
However, the test case is also missing to check for the
error ENOTSUP. It should skip the case if the API returns
ENOTSUP. This patch fixes these two issues.
Fixes: 202d375c60 ("app/test: add cryptodev unit and performance tests")
Cc: stable@dpdk.org
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Cryptodev doesn't limit the number of descriptors that can be supported
by the PMD.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
